NOW AVAILABLE IN PILOT PLANT QUANTITIES
1
CH 2 —CH—CH-GH o=c c=o ... OMjduiJo MCS Γ O^fcj^ NOW AVAILABLE IN PILOT PLANT QUANTITIES PVM/MA is α new polymeric acid anhydride, soluble both in water and organic solvents. Structurally, it is a linear copolymer consisting of alternating methyl vinyl ether and maleic anhydride units as shown graphically above. OUTSTANDING ^FEATURES The properties of PVM/MA sug- gest its use in adhesives, hinders, cera- mics, coatings, detergents, dispersions, emulsions, latex, leather, paper, textiles, and 'Λ thickeners. Can you use the unique combination of properties of PVM/MA in your product or process? Our New Product Bulletin No. P-103 describing this new polymer will be sent APPEARANCE; Fluffy, white, amorphous powder (bulk density is approximately 16 Ibs./cu.ft.) VISCOSITY RANGE: PVM/MA is now available in the viscosity range of 0.3 to 3 ("rçsp of 1 g./l00 ml. 2-butanone at 25°C). Higher viscosity samples will be made available in the future. SOLUBLE IN: Water and alcohols (dissolves with chemical reaction), acetone, methyl ethyl ketone, cyclohexanone, methyl acetate, ethyl acetate, 7-butyrolactone, benzaldehydo, and pyridine. INSOLUBLE IN : Aliphatic and aromatic hydrocarbons and their halogen derivatives, ethyl ether and nitroparaffins. COMPATIBILITY: PVM/MA is compatible with a wide variety of water-soluble gums and resins and plasticizers. SOLUBILITY in water over the entire pH ronge. WIDE RANGE OF VISCOSITIES (from hl· '• soi.ds-low viscosity solutions to low solids-lvgh viscosity solutions). HIGH TOLERANCE FOR MOST METAL SALTS in aqueous solutions. REACTIVITY with amines and alcohols. INSOLUBILIZATION with polyaicohols, polyamines, or certain heavy metal ions. to you upon request From Research to Reality.. VOLUME 2 9, NO. 4 4 » » O C T O B E R 2 9, 1 9 5 1 4615 GENERAL ANILINE & FILM COPORATION PMV/MA
Transcript of NOW AVAILABLE IN PILOT PLANT QUANTITIES
CH2—CH—CH-GH o=c c=o
... OMjduiJo M C S Γ O^fcj^
NOW AVAILABLE IN PILOT PLANT QUANTITIES
PVM/MA is α new polymeric acid anhydride, soluble both in water and organic solvents. Structural ly, it is a l inear copolymer consisting of al ternat ing methyl vinyl ether and maleic anhydr ide units as shown graphica l ly above.
O U T S T A N D I N G ^FEATURES
The properties of PVM/MA suggest its use in adhesives, hinders, cera-mics, coatings, detergents, dispersions, emulsions, latex, leather, paper, textiles, and 'Λ th ickeners . Can you use the unique combinat ion of proper t ies of PVM/MA in your product or process? Our New Product Bulletin No. P-103 describing this new polymer will be sent
APPEARANCE; Fluffy, white, amorphous powder (bulk density is approximately 16 Ibs./cu.ft.)
VISCOSITY RANGE: PVM/MA is now available in the viscosity range of 0.3 to 3 ("rçsp of 1 g . / l 00 ml. 2-butanone at 25°C). Higher viscosity samples will be made available in the future.
SOLUBLE IN: Water and alcohols (dissolves with chemical reaction), acetone, methyl ethyl ketone, cyclohexanone, methyl acetate, ethyl acetate, 7-butyrolactone, benzaldehydo, and pyridine.
INSOLUBLE IN : Aliphatic and aromatic hydrocarbons and their halogen derivatives, ethyl ether and nitroparaffins.
COMPATIBILITY: PVM/MA is compatible with a wide variety of water-soluble gums and resins and plasticizers.
SOLUBILITY in water over the entire pH ronge.
WIDE RANGE OF VISCOSITIES (from hl· '• soi.ds-low viscosity solutions to low solids-lvgh viscosity solutions).
HIGH TOLERANCE FOR MOST METAL SALTS in aqueous solutions.
REACTIVITY with amines and alcohols.
INSOLUBILIZATION with polyaicohols, polyamines, or certain heavy metal ions.
to you upon request
From Research to Reality..
V O L U M E 2 9, N O . 4 4 » » O C T O B E R 2 9, 1 9 5 1 4615
GENERAL ANILINE & FILM COPORATION
PMV/MA
