Metallized Polypropylene - Electronic Concepts · PDF file5MP2 SERIES Metallized Polypropylene...
7
5MP2SERIES Metallized Polypropylene Rev. 3 Metallized Polypropylene Switching power supply capacitors that require snubber and high current applications. Voltage: 400 to 2000 VDC; Capacitance as high as 10.0μF; ESR as low as 0.005 OHMS; ESL as low as 18nH; RMS current to 48.4 amps; UL94V-0 flame retardant; three configurations; with axial leads or tab terminations. FEATURES - Low loss polypropylene dielectric - High power rugged construction - Tested for high peak currents - Smaller size - UL94V-0 flame retardant - Low inductance - High RMS capability - Low impedance and ESR - RoHS compliant STANDARD CONFIGURATION - 5MP22: axial leads - 5MP26: radial tabs/low profile - 5MP27: radial tabs/high profile
Transcript of Metallized Polypropylene - Electronic Concepts · PDF file5MP2 SERIES Metallized Polypropylene...
5MP2SERIESMetallized Polypropylene
Rev. 3
Metallized Polypropylene
Switching power supply capacitors that require snubber and high current applications. Voltage: 400 to 2000 VDC; Capacitance as high as 10.0μF; ESR as low as 0.005 OHMS; ESL as low as 18nH; RMS current to 48.4 amps; UL94V-0 flame retardant; three configurations; with axial leads or tab terminations.
FEATURES- Low loss polypropylene dielectric- High power rugged construction- Tested for high peak currents- Smaller size- UL94V-0 flame retardant- Low inductance- High RMS capability- Low impedance and ESR- RoHS compliant
STANDARD CONFIGURATION- 5MP22: axial leads- 5MP26: radial tabs/low profile- 5MP27: radial tabs/high profile
Rev. 3
Parameter Method ConditionVibration 204 DShock 213 IHumidity 106 -Thermal Shock 107 ALife 108 F
Reference MIL-STD-202
Insulation Resistance vs. Temperature
Insu
latio
n R
esis
tanc
e (M
Ω x
μF)
Temperature (C)
1
10
100
1,000
10,000
100,000
25 50 75 100 125 150
Capacitance Change at 1kHz vs. Temperature
Cap
acita
nce
Cha
nge
(%)
Temperature (C)
-4.0%
-3.0%
-2.0%
-1.0%
0.0%
1.0%
2.0%
3.0%
-60 -45 -30 -15 0 15 30 45 60 75 90 105 120 135 150
Dissipation Factor at 1kHz vs. Temperature
Dis
sipa
tion
Fact
or (%
)
Temperature (C)-60 -45 -30 -15 0 15 30 45 60 75 90 105 120 135 150
0.00%
0.01%
0.011%
0.02%
0.025%
0.03%
Specification Summary
Characteristics
Dielectric StrengthCapacitors withstand a DC potential of 1.5 x rated voltage for one (1) minute without damage or break-down. Test voltage is applied and discharged through a minimum resistance of 100 OHM per volt minimum.
Dissipation FactorPolypropylene has an intrinsic dissipation factor of less than 2.1x 10-4 over the operating temperature range of -55°C to +105°C and frequencies to 1MHz.
Capacitance Range0.47μF to 10.0μF
Capacitance ToleranceStandard capacitance tolerance is ±10%. Tolerances of ±5%, ±2% & ±1% are also available.
Operating Temperature Range-55°C to +105°C
Enclosure/ConstructionPolypropylene film in a polyester wrap with epoxy endfill. Terminals are tin plated copper.
Voltage RatingVDC: 400VDC to 2000VDCVAC: 230VAC to 460VAC
Quality ControlCapacitors are tested 100% for: • Capacitance • Tolerance • Dissipation Factor • Dielectric withstanding voltage • Insulation Resistance • Equivalent Series Resistance (ESR)Process and inspection data are maintained on file and availableupon special request.
Environmental
Rev. 3
Note: RMS current ratings based on maximum capability of the capacitor element. For capacitor style with leads, the RMS current rating is limited by the lead wire as follows: #16: 19 AMPS; #18: 16 AMPS; #20: 12 AMPS.
5MP2_J474K5MP2_J684K5MP2_J105K5MP2_J155K5MP2_J205K5MP2_J225K5MP2_J335K5MP2_J475K5MP2_J685K5MP2_J106K5MP2_K474K5MP2_K684K5MP2_K105K5MP2_K155K5MP2_K205K5MP2_K225K5MP2_K335K5MP2_K475K5MP2_N305K5MP2_N405K5MP2_N505K5MP2_N605K5MP2_N705K5MP2_N805K5MP2_BN105K5MP2_BN155K5MP2_BN205K5MP2_BN255K5MP2_BN305K5MP2_BN335K5MP2_BT105K5MP2_BT135K5MP2_BT155K5MP2_BT185K5MP2_P105K5MP2_P125K
0.470.681.01.52.02.23.34.76.810.00.470.681.01.52.02.23.34.73.04.05.06.07.08.01.01.52.02.53.03.31.01.31.51.81.01.2
230230230230230230230230230230230230230230230230230230230230230230230230460460460460460460460460460460460460
400400400400400400400400400400600600600600600600600600800800800800800800120012001200120012001200160016001600160020002000
168143143143143143143896565
251251251214214113113113285220179151130115
1076762610508425373813677567498709622
182222222222223550501818182222424242222835425057202834414956344149564956
7997
143214285314471421443652118171251321428249373532856880895905913918
107611431219127012761232813881851896709746
2.73.24.25.56.77.18.48.89.211.94.15.36.98.29
6.99.111.621.421.821.821.821.721.619.221.623.424.524.724.117.719.319.020.017.218.1
4.45.26.88.9
10.911.613.714.315
19.36.68.611.213.314.611.214.918.934.935.535.635.535.335.231.235.238.139.940.339.228.831.431.032.528.029.5
5.36.28.1
10.813.114
16.517.218
23.27.9
10.313.516
17.513.517.922.741.942.642.742.742.542.337.542.345.847.948.447.134.637.837.339.133.735.5
0.70.81.01.31.61.72.02.12.22.81.01.31.61.92.11.62.22.85.15.25.25.25.25.14.65.15.65.85.95.74.24.64.54.84.14.3
PART NUMBER CAPµF
VOLTAGEVDC
VOLTAGEVAC
MAXIMUM RIPPLE CURRENTIN AMPS 10kHz
50°C 105°C85°C
I PEAKAMPS
dv/dtV/µs
(TYP)"ESL"
nH25°C
0.0160.0150.0100.0070.0060.0060.0050.0060.0070.0050.0110.0080.0060.0050.0050.0100.0070.0060.0050.0050.0050.0050.0050.0050.0050.0050.0050.0050.0050.0050.0050.0050.0050.0050.0050.005
ESR100 kHzOHMSMAX
TEMPERATURES
(TYPICAL)"f" RES
kHz
1710131210828847657305963922742261710142211738847655224263576254733793162702361120782609498416371862691588502721615
Detail Data
Rev. 3
5MP2_J474K5MP2_J684K5MP2_J105K5MP2_J155K5MP2_J205K5MP2_J225K5MP2_J335K5MP2_J475K5MP2_J685K5MP2_J106K5MP2_K474K5MP2_K684K5MP2_K105K5MP2_K155K5MP2_K205K5MP2_K225K5MP2_K335K5MP2_K475K5MP2_N305K5MP2_N405K5MP2_N505K5MP2_N605K5MP2_N705K5MP2_N805K5MP2_BN105K5MP2_BN155K5MP2_BN205K5MP2_BN255K5MP2_BN305K5MP2_BN335K5MP2_BT105K5MP2_BT135K5MP2_BT155K5MP2_BT185K5MP2_P105K5MP2_P125K
0.470.681.01.52.02.23.34.76.810.00.470.681.01.52.02.23.34.73.04.05.06.07.08.01.01.52.02.53.03.31.01.31.51.81.01.2
0.4530.4860.5590.6530.7340.7940.9530.8930.9121.0720.6110.7070.8280.9191.0410.8250.9801.1451.8151.8151.8151.8151.8151.8151.8151.8151.8151.8151.8151.8151.8151.8151.8151.8151.8151.815
0.2600.2940.3660.4610.5410.5390.6810.6380.6580.8170.4180.5140.6350.7260.8480.6320.7880.9531.4551.4551.4551.4551.4551.4551.4551.4551.4551.4551.4551.4551.4551.4551.4551.4551.4551.455
------
0.6810.6380.6580.817
--
0.6350.7260.8480.6320.7880.9531.4551.4551.4551.4551.4551.4551.4551.4551.4551.4551.4551.4551.4551.4551.4551.4551.4551.455
------
0.9530.8930.9121.072
--
0.8280.9191.0410.8250.9801.1451.8151.8151.8151.8151.8151.8151.8151.8151.8151.8151.8151.8151.8151.8151.8151.8151.8151.815
------
1.6902.1902.6902.690
--
1.5651.6901.6902.4402.4402.4402.0652.3152.5652.8153.0653.3152.0352.2852.5352.7853.0353.2852.5352.7853.0353.2853.0353.285
------
0.6810.6380.6580.817
--
0.6350.7260.8480.6320.7880.9531.4551.4551.4551.4551.4551.4551.4551.4551.4551.4551.4551.4551.4551.4551.4551.4551.4551.455
------
0.9530.8930.9121.072
--
0.8280.9191.0410.8250.9801.1451.8151.8151.8151.8151.8151.8151.8151.8151.8151.8151.8151.8151.8151.8151.8151.8151.8151.815
202020202020201818182020202020181818161616161616161616161616161616161616
------
1.2501.7502.2502.250
--
1.1251.2501.2502.0002.0002.0001.2501.5001.7502.0002.2502.5001.2501.5001.7502.0002.2502.5001.7502.0002.2502.5002.2502.500
PART NUMBER CAPµF
TMAX
HMAX
LOW PROFILE 5MP26
T MAX
L±0.062
HMAX
S+ 0.093,-0.062
TMAX
HMAXAWG
1.1251.2501.2501.2501.2501.2501.2501.7502.2502.2501.1251.1251.1251.2501.2502.0002.0002.0001.2501.5001.7502.0002.2502.5001.2501.5001.7502.0002.2502.5001.7502.0002.2502.5002.2502.500
L±0.062
HIGH PROFILE 5MP27
L±0.062
------
1.2501.7502.2502.250
--
1.1251.2501.2502.0002.0002.0001.2501.5001.7502.0002.2502.5001.2501.5001.7502.0002.2502.5001.7502.0002.2502.5002.2502.500
AXIAL LEADS 5MP22S
+ 0.093,-0.062
------
1.6902.1902.6902.690
--
1.5651.6901.6902.4402.4402.4402.0652.3152.5652.8153.0653.3152.0352.2852.5352.7853.0353.2852.5352.7853.0353.2853.0353.285
Detail Data
Rev. 3
T 1.500MINL
H
AWG
5MP22
5MP26(400 VDC - 600 VDC)
L
0.031 ±0.010
T
H0.180 ±0.010 S
0.360±0.010
SLOT 0.156 X 0.218±0.003
5MP26(800 VDC - 2000 VDC)
L
0.040±.005
0.258 ±0.010 S
0.550±0.010
SLOT 0.236 X 0.315±0.003
H
T
Dimensional Data
Rev. 3
5MP27(800 VDC - 2000 VDC)
0.040 ± 0.005
LS0.258
± 0.010
0.550 ± 0.010
SLOT 0.236 X 0.315± 0.003
H
T
5MP27(400 VDC - 600 VDC)
L
0.031 ±0.003
0.360 ±0.010
S0.180±0.010
SLOT 0.156 X 0.218±0.003
H
T
Dimensional Data
Rev. 3
TYPEMetallized Polypropylene
STYLE Axial Leads (22: axial leads, 26: radial tabs--low profile, 27: radial tabs--high profile)
TOLERANCEK = ±10%. Other tolerances are also available.
5MP
22
J
335
K
VOLTAGESJ = 400 VDC; K = 600 VDC; etc.
CAPACITANCE IN PICOFARADSThe first two digits are significant, the third represents the number of zeros(e.g 475=4700000pF)
Marking And Date CodeAll capacitors are marked with company initials "EC", corporate logo or EC trademark—in addition to type 5MP2, capacitance, tolerance, rated DC working voltage and date code. The first two digits of the date code represent the year, the second two digits the week, i.e., 1252 is the 52nd week of 2012, 1202 is the second week of 2012.
Quality AssuranceMajor emphasis is placed on quality assurance. EC is an ISO 9001 and AS9100 Certified Company. Raw material inspection and the use of SPC manufacturing procedures assure the highest quality standards. Procedures are fully described in the EC Quality Control Manual. Electronic Concepts will continue to advance the state-of-the-art by utilizing leading edge technology, compact capacitor designs and establishing reliability procedures.
Electronic Concepts is the only major manufacturer to offer polypropylene capacitors in three different configurations. Each is designed to fill a specific mechanical layout requirement; encompassing such parameter goals as optimizing pcb density or spacing. Now for the first time the circuit design dictates which EC capacitor to select!
In addition, because radial tab terminals are available, greater reliability can be realized, especially in hostile environments such as shock and vibration. Tabs also allow for lower inductance and higher RMS current carrying capacities versus other brands that can only be specified with wire leads. In addition, tabs offer the option of surface mounting.
United States Headquarters Electronic Concepts, Inc.526 Industrial Way WestEatontown, NJ 07724Tel: 732-542-7880Fax: 732-542-0524
email: [email protected]:www.ecicaps.com
European HeadquartersElectronic Concepts Europe LTDIDA EstateOughterardCo. Galway Irelandtel: +353-91-552385,552432fax: +353-91-552387email: [email protected]:www.electronicconcepts.ie
Distribution CenterElcon Sales542 Industrial Way WestEatontown, NJ 07724Tel: 732-380-0405Fax: 732-380-0409email: [email protected]
How to Order
Sales Offices
Additional Information
