KWT 2500 4-channel DSP amplifier with Danteklangwert-audio.com/onewebmedia/Klangwert KWT2500.pdfKWT...
2
KWT 2500 4-channel DSP amplifier with Dante Klangwert - Beckumer Strasse 3 – D-48231 Warendorf - Tel: +49 2581 9490600 - info@klangwert-audio.com Klangwert KWT 2500 4 channel digital amplifier with DSP and DANTE inputs, 4 x 600 Watt Amplifier Number of channels 4 Output power 4Ω 8Ω (Bridgemode) 4 x 600W 2 x 1200W Max output voltage / current 85V peak / 31A peak AC Main Power Power Supply Universal, regulated switch mode with PFC (Power factor correction) Nominal Power requirement 100-240V ±10%, 50-60Hz Operating voltage 90V – 264V Thermal Operating temperature range 0°-45°C AUDIO Gain 26dB (voltage gain x80) Input sensitivity 3V/11,7dBu Frequency response 20Hz – 33kHZ (±0,5dB) @1W, 8Ω S/N ratio >115dB (20Hz-20kHz, A weighted) Crosstalk-separation 85dB @ 1kHz THD+N <0,05% from 1W to full power (typically <0,01%) IMD <0,02% from 1W to full power (typically <0,005%) Input impedance 10kΩ balanced Slew rate 50V/µs @ 8Ω, input filter bypassed Damping factor >10000@100Hz
Transcript of KWT 2500 4-channel DSP amplifier with Danteklangwert-audio.com/onewebmedia/Klangwert KWT2500.pdfKWT...
KWT 2500
4-channel DSP amplifier with Dante
Klangwert - Beckumer Strasse 3 – D-48231 Warendorf - Tel: +49 2581 9490600 - [email protected]
Klangwert KWT 2500 4 channel digital amplifier with DSP and DANTE inputs, 4 x 600 Watt Amplifier
Number of channels 4 Output power
4Ω 8Ω (Bridgemode) 4 x 600W 2 x 1200W
Max output voltage / current
85V peak / 31A peak
AC Main Power Power Supply Universal, regulated switch mode with PFC
(Power factor correction) Nominal Power requirement
100-240V ±10%, 50-60Hz
Operating voltage 90V – 264V Thermal Operating temperature range
0°-45°C
AUDIO Gain 26dB (voltage gain x80) Input sensitivity 3V/11,7dBu Frequency response 20Hz – 33kHZ (±0,5dB) @1W, 8Ω S/N ratio >115dB (20Hz-20kHz, A weighted) Crosstalk-separation 85dB @ 1kHz THD+N <0,05% from 1W to full power (typically
<0,01%) IMD <0,02% from 1W to full power (typically
<0,005%) Input impedance 10kΩ balanced Slew rate 50V/µs @ 8Ω, input filter bypassed Damping factor >10000@100Hz
KWT 2500
4-channel DSP amplifier with Dante
Klangwert - Beckumer Strasse 3 – D-48231 Warendorf - Tel: +49 2581 9490600 - [email protected]
DSP: Sharc DSP @300MHz Internal processing 40bit floating point, asynchronous sample-rate Converter latency 2ms Presets Up to 96 Presets Limiter Peak + RMS-Limiter Delay 1500ms/input
500ms/ output Input-EQ: 15x IIR-EQ with high-lowshelv, high-lowpass,
peak 512 taps FIR-filter each channel (input or output)
Output-EQ 10x IIR-EQ with high-lowshelv, high-lowpass, peak 512 taps FIR-filter each channel (input or output)
Output-crossover 2x crossover filter up to 48dB/octave Routing MUX 4x4 with addition/substraction
User-Interface: 2x 20 character LCD display 5 buttons + encoder
Firmware-update In system update by network AUDIO Frequency response 20Hz – 20kHz (±0,5dB) Max Input-Voltage 4,6Vrms / +15,5dBu (30K balanced) S/N ratio >113dB on analog Input THD+N <85dB @1kHz & 100W/4R I/O-features Analog: 4 x XLR-inputs, 4 XLR thru
Digital: 2 x AES/EBU (XLR) (SRC 32kHz – 196kHz), 2x AES/EBU thru (relais bypass) Dante / Ethernet with 2 x RJ45 / 100mbit switch for daisy chain
