Intervention Riser System (IRS) - Helix Energy Solutions · Intervention Riser System (IRS) ... The...
Click here to load reader
Transcript of Intervention Riser System (IRS) - Helix Energy Solutions · Intervention Riser System (IRS) ... The...
ι Riser access to subsea trees
down to 3,000 metres ι
Intervention Riser System (IRS)
Well Ops IRS (intervention riser system) enables access to conventional and horizontal subsea trees in depths down to 3,000 metres
Well Ops Intervention Riser System (IRS) enables access to both conventional and horizontal subsea trees in depths down to 3,000 metres.
The IRS system combines rapid response with maximum operational flexibility to meet the specific intervention needs of high rate producing deepwater subsea assets. All required through-tubing subsea well operations can be safely serviced with the IRS system, with multi-disciplinary operations being conducted in a single mobilisation.
The IRS can be utilised for wireline intervention, production logging, coiled tubing operations, well stimulation and full plug and abandonment operations.
The intervention riser system allows the Well Ops Q4000 to respond quickly to subsea well intervention needs as a cost effective alternative to a drilling rig. The system can be used to address loss of production or other emergency intervention needs using standard tooling and procedures.
Intervention Riser System (IRS)
www.helixesg.comemail: [email protected]
The global leader in subsea well intervention
Specifications
Maximum bore diameter 7 3/8” production
2” annulus
Maximum working pressure 10,000 psi
Maximum working depth (MWD) 3,000 m (10,000ft)
Hydraulics Operating Pressure
2,500 psi operational (3,000 psi max)
Weight 50 Te Subsea Package
5.8 Te HPU
Well Barrier Type 1 x 7 3/8” Hydraulic cutting gate valve (LCV)
2 x 7 3/8” Spring-assist fail-safe-closed gate valves (UCV & RTV)
3 x annular 2 1/16” Failsafe-closed gate valves
Proven Cut Capability
Retainer Valve: Slickline / Braided line / Electric line
Upper Cutting Valve: Slickline / Braided line / Electric line
Lower Cutting Valve: 2 7/8” Coiled tubing, 2” bar (low pressure seal)
Slickline / Braidedline / Electric line
Subsea Tree Compatibility Horizontal or Vertical
Subsea Tree Control Functions
11 spare hydraulic control lines
10,000 psi SCSSV control line
10,000 psi monitor line
10,000 psi chemical injection line
Applicable Uses Coiled tubing, Electric line, Slickline operations
Cementing operations
Well abandonment
Tree change outs
5.96
m (1
9' 7
”)