HX-1080™ Expanded Beam (EB) Connector - OnRamp Comm · integrated data link for uni-directional...

HX-1080™ Expanded Beam (EB) Connector The all new Stratos HX-1080 Series HD

& SD TV non-contact connectors

Connector Specification

Optical Insertion Loss Typ -0.75dB

(Singlemode 9/125μm 1310nm) These hybrid fibre /electrical connectors are

backed by more than 25 years experience

with expanded beam (EB) fibre connector

technology and are already the performance

bench-mark in military harsh environment

tactical applications where reliability and

consistent field performance are a given.

In support of the deployment of HDTV and

progressing from the limitations of legacy

fibre contacting connector interfaces,

Stratos has drawn on its unique experience

for the development of the HX-1080

Broadcast Series. With world leading

singlemode EB optical performance using

protected lensed fibres, the Stratos HX-

1080 is designed to meet and exceed the

generic requirements of the SMPTE

specifications. On cameras at Studio or OB

locations Stratos HX-1080 Series

connectors provide a solution that will work

first time and every time. Offering

unrivalled performance and versatility with

low cost de-skilled field re-instatement

solutions, and World- Wide support the

HX-1080 are now set to become the new

bench-mark for hybrid connectors in the

challenging Broadcast environment

Optical Return Loss >-45dB Auxiliary Pwr. Elec. 600V ac 10A

Signal Elec. 42V ac 1A 60V dc 1A

Aux. Pwr. Contact resistance <4mΩ

Signal Elec. Contact resistance <5 mΩ

Operating Temperature -40°C to +85°C

Storage Temperature -55°C to +85°C

Tensile Load >1000N (Cable dependant)

Endurance >2000 mating cycles

IP 67 Environmental Seal rating

Crush Resistance: >3000N

Free fall, 500 onto concrete from 1.2m

Top Left: HX-1080 Plug and bulkhead assembly showing blind mate thumb feature and interchangeable colour identification system. Bottom Left: HX-1080 Bulkhead Panel mount detail Top Right: Opto-electrical Pin-out configuration.

• Rugged Hermaphroditic

• Adapter Free Deployment

• SMPTE Compatible

• Flexible Install Options

• Field Re-instatement

Solutions

• Ergonomic Design

• High Performance

• Easy Clean Interface

• Non-contact Optics

• High reliability/durability

• IP 67 Sealing

• Worldwide Support

Stratos Limited (UK), Hollands Road Industrial Estate Haverhill, Suffolk CB9 8PR, England Telephone: +44 (0)1440 706441 Fax: +44 (0)1440 762044 Website: http://www.stratoslightwave.com Email: [email protected] As part of a process of continual product improvement Stratos reserve the right to alter all or part of the specification of products without prior notice. Whilst every effort to ensure the accuracy of the information contained herein Stratos cannot accept any liability arising from its use.

23mm

23mm

M3.4 Typ 4

Dia 26mm

158mm ∅35mm

Auxiliary Electrical

Low Voltage Signal

Singlemode EB Optical

mailto:[email protected]

ST Mode 1 Mode 2 Mode 3

VMDA-6 Video Media Conversion DA

Product Overview

The VMDA-6 is the latest Product offering from the Stratos Video Optic Line. This

unique Distribution Amplifier and Media Converter offers the end user the flexibility

needed for todays HD/SD Field Production work.

The VMDA-6 is a unique device in that it offers the end-user selectable modes for

media conversion and distribution of SMPTE 297m Compatible HD/SD Traffic. Based

on 3 efficient configurations, this device accommodates situations most common to

production work. Mode 1 allows for a Fiber Signal input reclocked to Fiber out and

Media converted to a distributed 6 Channel Electrical output. Mode 2 allows an

Electrical input to be media converted to Fiber out, while accepting a Fiber input, media

converted to a distributed 6 channel Electrical output. Mode 3 distributes an Electrical

input to a 6 channel Electrical output while media converting the signal for Fiber

output. All signals are internally reclocked for added signal integrity.

User Friendly Intuitive Display

The VMDA-6 top cover display enables the user to quickly Configure & Identify mode of

operation. With Signal present LED’s and under lit signal flow arrows, setup is easy and

can be identified at a glance.

• 75ohm SMPTE 259/292M Electrical Input/Output

• SMPTE 297M Compatible-based on HD/SD traffic

• (1) ST Fiber Input, (1) ST Fiber Output, (1) Electrical Video Input, (6) Electrical Video Outputs

• Powered by Mini XLR Connector (+4.5v to +16v DC )

• Convenient size but durable for demanding field use

• 3 User selectable Modes

• Intuitive LED Indications + Signal flow arrows

• Can be deployed in Stratos VMCR-16/18 Media Rack occupying (6) Slots

• DDMI 12c Interface for Diagnostics and Unit Control

7444 W. Wilson Ave. Chicago, IL 60706 USA Telephone: +1 708-867-9600 Fax: +1 708-867-0996 Website: www.stratoslightwave.comEmail: [email protected]

As part of a process of continual product improvement Stratos reserve the right to alter all or part of the specification of products without prior notice. Whilst every effort to ensure the accuracy of the information contained herein Stratos cannot accept any liability arising from its use.

http://www.stratoslightwave.com/


16 Channel HD/SD Video Media Converter Rack

FEATURES (TX & RX) Compatible with all types of

Stratos's Video Media Converter (VMC) 19" 1RU design with rack slide

to simplify VMC change over in rack installations

18” to 22” depth with rack kit. 22” to 26” depth version available. Contact factory for availability

110/240V Dual power supply (1+1 Protection) for up to 16 Video Media Converter modules

Digital Diagnostic Monitoring Interface (DDMI) read out via Ethernet 10/100T compliant web enabled port

Custom Configurable with any combination of TX/RX VMC or MVMC Fiber Media Converter

Front panel transmitter/ receiver LED indications (mirrors video media converter LED functions)

Front panel channel ID strip

7444 W. Wilson Ave. Chicago, Illinois 60706 Phone: (708) 867-9600 Toll free: (800) 323-6858 Fax: (708) 867-0996 Email: [email protected]://www.stratoslightwave.com

PRODUCT OVERVIEW Stratos’s 16 channels BNC-to-Fiber Media Converter rack is broadcast video aggregation and transport product. It is compatible with Stratos's VMC-T-X-2 (TX), VMC-R-X-2 (RX), MVMC-T-X-2 (TX), and MVMC-R-X-2 (RX) product line of media converters.

APPLICATIONS Field production, such as sports and special event Studio Infrastructure links Cable broadcasting networks Outside broadcast trucks and vans Video distribution in convention and conference centers

As part of a process of continual product improvement Stratos reserve the right to alter all or part of the specification of products without prior notice Whilst every effort to ensure the accuracy of the information contained herein Stratos cannot accept any liability arising from its use


18 Channel HD/SD Video Media Converter Rack

FEATURES (TX & RX) Compatible with all types of

Stratos's Video Media Converter (VMC) 19" 1RU design with rack slide

to simplify VMC change over in rack installations

Throw down enclosed version available

110/240V Dual power supply (1+1 Protection) for up to 18 Video Media Converter (VMC) modules

Digital Diagnostic Monitoring Interface (DDMI) read out via Ethernet 10/100T compliant web enabled port

Custom Configurable with any combination of TX/RX BNC-to-Fiber Media Converter

Front panel transmitter/receiver LED indications (mirrors video media converter LED functions)

Front panel channel ID strip

Front panel power supply and temperature status LEDs

Identify unit type (TX or RX) without opening Rack or Throw down cover

PRODUCT OVERVIEW Stratos' s 18 channel BNC-to-Fiber Media Converter rack is broadcast video aggregation and transport product. It is compatible with Stratos' sVMC-T-X-2 (TX) and VMC-R-X-2 (RX) product line of media converters.

APPLICATIONS Field production, such as sports and special event Studio Infrastructure links Cable broadcasting networks Outside broadcast trucks and vans Video distribution in convention and conference centers

Throw down with cover


Rack Kit



Video BNC to “ST” Media Converters

SIMPLEX TRANSMITTER PRODUCT OVERVIEW The VMC-T-X-2 media converter transmitter module is a high performance integrated data link for uni-directional communication over single mode fiber. The VMC-T-S-2 is designed to be used in SMPTE 259M/297M/305M/310M applications with data rate up to 540Mbps. The VMC-T-H-2 is designed to be used in multi-protocol video applications with data transfer rate up to 1.485Gbps. The media converter module is designed to connect to electrical high speed serial digital video links that require extended distance performance. It permits replacement of copper cable with optical fiber to provide a solution for systems requiring increased media interconnect distance. DIGITAL DIAGNOSTICS MONITORING INTERFACE The VMC-T-X-2 is offered with Digital Diagnostics Monitoring Interface (DDMI) which allows real-time access to device operating parameters such as module temperature, laser bias current, transmitted optical power and module supply voltage. It also defines a system of alarm flags, which alert end-users when particular operating parameters are outside of a factory set normal range.

SIMPLEX RECEIVER PRODUCT OVERVIEW The VMC-R-X-2 media converter receiver module is a high performance integrated data link for uni-directional communication over single mode fiber. The VMC-R-S-2 is designed to be used in SMPTE 259M/297M/305M/310M applications with data transfer rate up to 540Mbps. The VMC-R-H-2 is designed to be used in multi-protocol video applications with data transfer rate up to 1.485Gbps (SMPTE 292M/297M/259M/305M/310M). The media converter module is designed to connect to electrical high speed serial digital video links that require extended distance performance. It permits replacement of copper cable with optical fiber to provide a solution for systems requiring increased media interconnect distance. DIGITAL DIAGNOSTICS MONITORING INTERFACE The VMC-R-X-2 is offered with Digital Diagnostics Monitoring Interface (DDMI) which allows real-time access to device operating parameters such as module temperature, received optical power and module supply voltage. It also defines a system of alarm flags, which alert end-users when particular operating parameters are outside of a factory set normal range.

FEATURES (TX & RX)

SMPTE 292M/297M/259M/305M compliant (up to 1.485Gbps)

SMPTE 259M/297M/305M compliant (up to 540Mbps) DVB/ASI Compliant

ATSC/SMPTE 310M compliant; 19.4 to 38.8Mbps

Rugged die cast/over molded construction

Digital Diagnostics Monitoring Interface

Unit to unit pitch (Port Density) of 0.75"

Rugged "ST" simplex optical interface Line Equalized 75Ω BNC (male)

simplex electrical interface (simplex transmitter VMC)

Re-clocked/line driven 75Ω BNC (male) simplex electrical connector (simplex receiver VMC)

Error free pathological pattern operation

Typical wall plug or 12V battery supply (+4.5V to +16V) Status indicating LEDs "ST" Dust cover included (Not

shown)

7444 W. Wilson Ave. Chicago, Illinois 60706 Phone: (708) 867-9600 Toll free: (800) 323-6858 Fax: (708) 867-0996 Email: [email protected] http://www.stratoslightwave.com


Optical Video SFP Transceivers Duplex Transceivers

The SPLC-20-9D-X-X Video Small Form-

factor Pluggable transceivers are high

performance integrated duplex data

links for bi-directional communication

over single mode optical fiber. These

transceivers are designed to

transmit/receive data rates ranging

from 143Mbps to 1.485Gbps and

compatible with SMPTE 292M

(1.485Gbps) and SMPTE 297M/259M

(143/177/270/360Mbps) standards.

These transceivers are available with

1310nm Fabry Perot, 1550nm DFB, or

CWDM lasers. These transceivers are

Class 1 Laser safety compliant with FDA

Radiation Performance Standards, 21

CFR Subchapter J and IEC-825-1

standard.

Digital Diagnostics

The duplex transceivers, dual

transmitter, and dual receiver modules

are offered with Digital Diagnostics

Monitoring Interface (DDMI), which

allows real-time access to device

operating parameters such as module

temperature, laser bias current,

transmitted optical power and module

supply voltage. It also defines a system

of alarm flags, which alert end-users

when particular operating parameters

are outside of a factory set normal

range.

Dual Transmitters & Receivers

The SP2T-20-9D-X-X and SP2R-20-9D-

XX Video Small Form-factor Pluggable

dual transmitter and dual receiver

modules are high performance

integrated simplex data links for uni-

directional communication over single

mode optical fiber. These modules are

designed to transmit or receive data

rates ranging from 143Mbps to

1.485Gbps and compatible with SMPTE

292M (1.485Gbps) and SMPTE

297M/259M (143/177/270/360Mbps)

standards. The dual transmitter

modules are offered with 1310nm Fabry

Perot , 1550nm DFB and CWDM lasers.

The dual receiver modules are offered

with single mode PIN Pre-Amp sub-

assemblies.

The dual transmitter modules are Class

1 Laser safety compliant with FDA



standard.

• SMPTE 292M/297M/259M compatible

• Based on industry standard SFP

• Dual TX, Dual RX, and transceivers in same foot print

• DFB and CWDM options available for transceiver

• MSA SFP foot print & pin out available

• Error free pathological pattern operation

• Digital Diagnostics Monitoring Interface

• Die cast metal housing

• Hot pluggable

• Single +3.3V power supply



Optical Video SFF 2x7 Transceivers Duplex Transceivers

The SLC-27-9D-2-X Video Small Form

Factor (SFF) 2x7 transceivers are high

performance integrated duplex data

links for bi-directional communication

over single mode optical fiber. These

transceivers are designed to

transmit/receive data rates ranging





These transceivers are currently offered

with 1310nm Fabry Perot laser and

singlemode PIN pre-amp receiver sub-

assembly. These transceivers are Class




standard.

Digital Diagnostics

The duplex transceivers, dual

transmitter, and dual receiver modules

are offered with internally calibrated

Digital Diagnostics Monitoring Interface

(DDMI), which allows real-time access

to device operating parameters such as

module temperature, laser bias current,

transmitted optical power and module

supply voltage. It also defines a system

of alarm flags, which alert end-users

when particular operating parameters

are outside of a factory set normal

range.

Dual Transmitters & Receivers

The S2T-27-9D-2-X and S2R-27-9D-2-X

Video Small Form Factor (SFF) 2x7 dual

transmitter and dual receiver modules

are high performance integrated

simplex data links for uni-directional

communication over single mode optical

fiber. These modules are designed to

transmit or receive data rates ranging





The dual transmitter and dual receiver

modules are currently offered with

1310nm Fabry Perot lasers and single

mode PIN Pre-Amp sub-assemblies

respectively.

The dual transmitter modules are Class




standard.

• SMPTE 292M/297M/259M compatible

• Single +3.3V power supply

• Class 1 laser safety compliant



• Low profile fits mezzanine card applications

• Error free pathological pattern operation

• Digital Diagnostics Monitoring Interface

• SFF 2x7 with DFB and CWDM lasers are in Stratos road map

• Wave solderable / aqueous washable

• Based on industry standard SFF foot print.

ST


MX-3010F – Four Channel Camera Fibre Link System

Product Overview The MX-3010F Four Channel Camera Fiber Link Multiplexer is the latest addition to the

Stratos video product line. It enables the user to connect up to 4 SMPTE 311M

interfaced broadcast cameras and to multiplex them over one Single Mode Fiber (SMF).

These bi-directional camera channels accomplishes video, CCU control, audio, talley

telecom, and return video all over a single fiber.

The system consists of two multiplex / de-multiplex units, one for connection to the

camera and the other for connection to the associated Camera Control Units. The

electrical connection types available are SMPTE 304M or Stratos’ own HX1080

expanded beam technology. The optical link between these two units is either “SC” or

“ST” terminated single mode fibre.

MX-3010F System Benefits include the ability to extend the camera optical connection

range to more than 20km. The MX-3010F utilizes standard SMPTE Electrical Emulating

technology when local power is provided to the cameras. Thus, eliminating multiple

cable runs and distance restriction associated with HD production. It also cuts rigging

time in half and reduces overall vehicle transport weight.

Standard features include Redundant Power Supplies, Front Panel Indicator LEDs and

Digital Diagnostic Monitoring Interface read out via Ethernet 10/100T compliant web

enabled port.

• Multiplex up to 4 SMPTE 311M Fibre Camera Link Channels

• Plug and Play Operation

• Dual universal 110/240V power supply

• Power & Sensing conventions for multiple Camera Manufacturers

• Options available for all SMPTE 311M Compatible Connectors or Stratos HX1080 expanded beam technology

• Camera Optical Range increased >3 fold

• Standard “SC” or “ST” Single Mode Fiber connection

• Monitoring Interface via Ethernet 10/100T web enabled port

• Front panel LED indications show RX / TX channel Status

• Cuts Rigging Time on Multi - Camera Productions

Left: MX 3010 F system is comprised of Camera Unit and CCU Unit. System shown fitted with SMPTE 311M compatible Stratos HX1080 Expanded Beam Connectors.

7444 W. Wilson Ave. Chicago, IL 60706 USA Telephone: +1 708-867-9600 Fax: +1 708-867-0996 Website: www.stratoslightwave.com Email: [email protected]


Mini-Video BNC to “LC” Media Converters

SIMPLEX TRANSMITTER PRODUCT OVERVIEW The MVMC-T-H-2 media converter transmitter module is a high performance integrated data link for uni-directional communication over single mode fiber. The MVMC-T-H-2 is designed to be used in multi-protocol video applications with data transfer rate up to 1.485Gbps (SMPTE 292M/ 297M/259M/305M/310M). The media converter module is designed to connect to electrical high speed serial digital video links that require extended distance performance. It permits replacement of copper cable with optical fiber to provide a solution for systems requiring increased media interconnect distance. DIGITAL DIAGNOSTICS MONITORING INTERFACE The MVMC-T-H-2 is offered with Digital Diagnostics Monitoring Interface (DDMI) which allows real-time access to device operating parameters such as module temperature, laser bias current, transmitted optical power and module supply voltage. It also defines a system of alarm flags, which alert end-users when particular operating parameters are outside of a factory set normal range.

SIMPLEX RECEIVERPRODUCT OVERVIEW The MVMC-R-H-2 media converter receiver module is a high performance integrated data link for uni-directional communication over single mode fiber. The MVMC-R-H-2 is designed to be used in multi-protocol video applications with data transfer rate up to 1.485Gbps (SMPTE 292M/297M/259M/305M/ 310M). The media converter module is designed to connect to electrical high speed serial digital video links that require extended distance performance. It permits replacement of copper cable with optical fiber to provide a solution for systems requiring increased media interconnect distance. DIGITAL DIAGNOSTICS MONITORING INTERFACE The MVMC-R-H-2 is offered with Digital Diagnostics Monitoring Interface (DDMI) which allows real-time access to device operating parameters such as module temperature, received optical power and module supply voltage. It also defines a system of alarm flags, which alert end-users when particular operating parameters are outside of a factory set normal range.

FEATURES (TX & RX)

SMPTE 292M compliant (up to 1.485Gbps)

SMPTE 259M/297M/305M compatible (up to 540Mbps) DVB/ASI Compliant

ATSC/SMPTE 310M comaptible; 19.4 to 38.8Mbps

Sized for direct attachment to video equipment with minimum coax runs

Rugged die cast/over molded construction

Digital Diagnostics Monitoring Interface Unit to unit pitch (Port Density)

of 0.625"

Rugged "LC" simplex optical interface

Line Equalized 75Ω BNC (male) simplex electrical interface (simplex transmitter)

75Ω BNC (male) simplex electrical connector (simplex receiver)

Error free pathological pattern operation Typical wall plug power supply Status indicating LEDs



ST

LX-8000 Series SMPTE Emulator Box

Product Overview

The LX-8000 Series SMPTE Emulator Box is the latest addition to the Stratos video

product line. It enables the user to connect a SMPTE fiber equipped camera with

hybrid wire/fiber cable, and convert it to a low cost single mode fiber. By utilizing

SMPTE Electrical Interface Technology you can effectively eliminate a majority of your

Bulky Hybrid cable runs.

The LX Box Series consist of a number of different connector style adaptor options. From any SMPTE 304m compliant plug/jack or the Stratos HX-1080 expanded beam connector to an optional ‘ST’ or ‘SC’ fiber connection. Each emulator pair performs two functions. The first is to allow bi-directional communication, with the full capabilities of a standard HD or SD fiber camera link protocol. The second is to provide the appropriate power and Connection sensing vital to proper operation.

Camera Power Options

The LX-8000 Product Family Offers a number of options for powering your camera.

The most common for single or multi camera operation is local power via AC supply or

by camera battery. The second is the LX-8000p which is provisioned to offer future

options, which provide the appropriate Power to the camera based on manufacturers

specifications.

• Camera Optical Range increased >3 fold

• Offers flexible Camera Powering Options

• Plug and Play Operation

• Convenient size but durable for demanding field use

• Power and Sensing Conventions for multiple Camera Manufacturers

• Options available for all SMPTE 311M Compatible Connectors or Stratos HX1080 expanded beam technology

• Standard “SC” or “ST” Single Mode Fiber connection

• Cuts Rigging Time on Multi - Camera Productions

• Optional Companion Unit to the MX3010F-4 Camera Fiber Link Multiplexer

Left: The STRATOS LX-8010E & Lx-8020E SMPTE Emulator Boxes. Featured here with the optional SMPTE 304E or HX-1080 Connector Sets.

7444 W. Wilson Ave. Chicago, IL 60706 USA Telephone: +1 708-867-9600 Fax: +1 708-867-0996 Website: www.stratoslightwave.com Email: [email protected]


http://www.stratoslightwave.com/


The Stratos HX-1080 Series

Connectors provide robust field

deployable, high performance

expanded beam solutions for HD &

SD Broadcast applications.

In the event of connector or cable

damage due to abuse or misfortune,

rapid cost effective and de-skilled field

re-instatement is a must to support the

successful deployment of any hybrid

fibre/electrical broadcast cabling solution.

To complement the Stratos HX1080

connector products unique repair/install

solutions are available. Typically three

scenarios challenge field deployment.

(1) Connector failure, (2) Cable failure

and (3) miscalculations of cable lengths

for fixed installations. Stratos provides

three strategies to deal with each

providing a measured balance between

cost, adaptability and performance for

each.

(1) With factory certified Temporary

Repair Patchcords (TRP) (a HX-1080 to

LX-1080(1) assembly), rapid de-skill

repairs using common LC technology are

effected in minutes. Half the work is

already done, the field work is little more

than the use of regular fibre optic pot

and polish techniques. Stratos can even

offer training courses for those new to

the job. TRPs are used either as a

permanent repair or temporary re-

instatement in which case the TRP can be

reused should misfortune strike again.

(2) Using similar principles mid-stream

cable repair can also be achieved

quickly and effectively through the use

of a factory terminated LX1080/LX1080

cord. This method even allows short

damaged lengths of cable to be

removed entirely.

(3) The frustrations of permanent

installs without storing excessive cable

over-lengths are eased by the freedom

to easily terminate on site once the

cable has been ideally routed. To

enable this while exploiting the benefits

of the HX-1080 expanded beam

interface, Stratos has designed a

unique optical feedthrough bulkhead

with standard LC pot/polish connections

on the rear, a de-skilled on-site

terminated LX-1080.

Low skilled, cost effective and rapid

solutions available for all eventualities,

when the show must go on the Stratos

product portfolio makes its as easy as 1

2 3.

Top: HX-1080 Optical Feedthrough bulkhead allowing all the benefits of a panel mounted expanded beam interface with a low skill field terminable LC Type Optical interconnect to the rear. Bottom Left: Factory terminated and re-useable HX-1080 to LX-1080 Temporary Repair Patchcord (TRP) assembly can be used to rapidly replace connectors where damage has occurred on cables already deployed. Bottom Middle: LX-1080 Field termination Component Kit consisting of all the required electrical contacts, LC connectors and consumables. Bottom Right: Factory terminated and re-useable the LX-1080 patchcord assembly allows damage to cable mid-stream to be repaired whilst minimising termination time in the field.

• Low Skill Termination

• Rapid Repair Solution

• Flexible Install Options

• Field Repair Solutions

• Economic

• High Performance

• Easy Clean Interface

• Non-contact Optical

• High Reliability/Durability

• IP 67 Sealing

• Worldwide Support

• Minimum Training

Stratos Limited (UK), Hollands Road Industrial Estate

Haverhill, Suffolk CB9 8PR, England

Telephone: +44 (0)1440 706441 Fax: +44 (0)1440 762044

Website: http://www.stratoslightwave.com Email: [email protected]


HX-1080™ Installation and Repair Solutions


Fibre Optic Transmitter/Receiver Module

FEATURES Wide dynamic range Suitable for all modulation

formats Adjustable receiver gain High reliability Alarm and status output Low power consumption Single 12V power supply

Class 1 Laser safety compliant optical output

BENEFITS OF FIBRE OPTIC TRANSMISSION Low loss which enables very

long transmission with minimal degradation of carrier-to-noise Lightweight, highly flexible,

small diameter cable Frequency response is

independent of transmission length

Nonconductive – provides electrical isolation

Lower cost compared to coaxial cable over long distances.

PRODUCT OVERVIEW Stratos VRF-X-X-X fibre optic modules are high performance compact modules which allow equipment supplier to provide an optical interface for their RF signals as an alternative or in addition to the traditional coaxial interface.

APPLICATIONS Satcomms up/down converters Broadcast Earth stations Head ends RF signal distribution GPS VSAT equipment




HX-1080™ Expanded Beam (EB) Connector - OnRamp Comm · integrated data link for uni-directional...

Documents

Transcript of HX-1080™ Expanded Beam (EB) Connector - OnRamp Comm · integrated data link for uni-directional...