CONNECTOR A - GS Global as per als.268.03 class d connector b mating connector should ... in note...

CONNECTOR A - GS Global   as per als.268.03 class d connector b mating connector should ... in note 4 class d was class c  note 5 added; sheet 2 added, exploded view,
CONNECTOR A - GS Global   as per als.268.03 class d connector b mating connector should ... in note 4 class d was class c  note 5 added; sheet 2 added, exploded view,
CONNECTOR A - GS Global   as per als.268.03 class d connector b mating connector should ... in note 4 class d was class c  note 5 added; sheet 2 added, exploded view,
CONNECTOR A - GS Global   as per als.268.03 class d connector b mating connector should ... in note 4 class d was class c  note 5 added; sheet 2 added, exploded view,
CONNECTOR A - GS Global   as per als.268.03 class d connector b mating connector should ... in note 4 class d was class c  note 5 added; sheet 2 added, exploded view,
download CONNECTOR A - GS Global   as per als.268.03 class d connector b mating connector should ... in note 4 class d was class c  note 5 added; sheet 2 added, exploded view,

of 5

  • date post

    16-Mar-2018
  • Category

    Documents

  • view

    306
  • download

    13

Embed Size (px)

Transcript of CONNECTOR A - GS Global as per als.268.03 class d connector b mating connector should ... in note...

  • ELECTRICAL OUTPUTS SPECIFICATION PER WCS-402030

    LABEL PER WQI-030-007LOCATE APPROXIMATELY AS SHOWN

    COMPLIANCE WITH FMVSS-124

    1

    2

    3

    NOTES - UNLESS OTHERWISE SPECIFIED:

    APS1

    CT1(15%)

    WOT1(76.8%)

    PEDAL ROTATION

    AP

    S O

    UT

    PU

    T V

    OLT

    AG

    E (

    %V

    cc)

    WOT(17)

    CT( 0)

    WOT2(38.4%)

    CT2(7.5%)

    APS2

    WILLIAMSCONTROLS

    200

    21

    172

    352

    32.8

    423

    132

    227

    CONNECTOR B

    CONNECTOR A

    15 2 73

    140

    79

    6

    10 2X

    7

    122X

    5

    11

    1

    8

    9

    4

    3 2

    13

    16

    49

    9

    15.5

    24.5

    9X 9

    75

    60

    1.5

    28.5

    11

    63.5

    28

    36.6

    13

    41.5

    28.8

    2X 9

    2

    A ---BLACK----- APS1B ---WHITE----- GND1C ---RED-------- VCC1D ---GREEN---- VCC2E ---BLUE------- GND2F ---ORANGE-- APS2

    A

    CONNECTOR A (REF):

    PACKARD ELECTRIC "METRI-PACK" CONNECTOR OR EQUIVALENTCONNECTOR & SEAL --- P/N 12066317TERMINAL (FEMALE) --- P/N 12103881

    CONNECTOR B:1 ---WHITE----- GND12 ---BLACK----- APS13 ---RED-------- VCC14 ---GREEN---- VCC25 ---ORANGE-- APS26 ---BLUE------- GND2

    AMP ECONOSEAL J SERIES CONNECTOROR EQUIVALENTCONNECTOR --------------- P/N 174264-2DOUBLE LOCK PLATE --- P/N 174265-7 OR 1-174265-1TERMINAL -------------------- P/N 171661-1WIRE SEAL ------------------- P/N 172888-2

    1

    2

    3 4

    5

    6

    [KPC]

    (ELECTIRICAL OUTPUTS FOR BOSCH ECU)

    REVISIONS

    ZONE REV DESCRIPTION OF CHANGE APPROVED ECN NO. DATE

    ALL, C7 A INITIAL ALPHA RELEASE AND ADD "ELECTRICAL OUTPUTS FOR BOSCH ECU" 008665 11/15/2013

    3RD ANGLE PROJECTION

    PROPRIETARY AND CONFIDENTIAL - ALL INFORMATION ON THIS DRAWING IS

    CONFIDENTIAL AND THE SOLE PROPERTY OF WILLIAMS CONTROLS, INC. ANY

    REPRODUCTION IN PART OR AS A WHOLE WITHOUT WRITTEN PERMISSION OF

    WILLIAMS CONTROLS IS PROHIBITED.

    14100 SW 72ND AVENUEPORTLAND, OR. 97224(503) 684-8600 FAX (503) 624-3836

    UNLESS OTHERWISESPECIFIED, DIMENSIONS ARE INMILLIMETERS PER ASME Y14.5M

    TOLERANCESXX.XX.XXANGLES

    FINISH (EXCEPT ASSEMBLIES):

    DRAWN:

    MODEL SERIES PROJECT

    MATERIAL:

    DATE

    TITLE

    SIZE CAGE CODE DWG NO. REV

    SCALE SHEET 1 OF 1

    DWG NO. REV

    D 11331

    A

    B

    C

    D

    12345678

    7 46 38 5 1

    D

    C

    B

    THROTTLE ASSY-ELEC,FLOOR

    402030 A1:11625WM-558

    402030 A

    A

    SEE SEPARATE PARTS LIST

    JZ 11/06/2012

    0.800.300.150.5

  • ELECTRICAL OUTPUT SPECIFICATIONS PER WCS-402262

    LABEL PER WQI-030-007LOCATE APPROXIMATELY AS SHOWN

    THE ELECTRIC CHARACTERISTICS DATA REFERSTO ASSEMBLED PEDAL

    FINISH (REFERENCE): PASSED 300 HR SALTSPRAY AS PER ALS.268.03 CLASS D

    CONNECTOR B MATING CONNECTOR SHOULD BE EQUAL/EQUIVALENT TO AMP "SUPERSEAL" 1.5 SERIES CONNECTOR P/N 0282090-1

    1

    2

    3

    4

    5

    NOTES - UNLESS OTHERWISE SPECIFIED:

    200

    21

    172

    32.8

    352

    131.73

    226.6

    131025.4

    15

    CONNECTOR A

    CONNECTOR B

    5

    140

    82.5

    73

    49

    75

    11.06

    61.5

    60.8

    3X 11.1

    24.5

    6X R

    6 X 9CODED A

    R14

    73

    4.3

    7.5

    28

    36.6

    40

    3X 9.5

    A

    A

    A

    A

    A

    A

    A --- APS1B --- GND1C --- VCC1(5V)D --- VCC2(5V)E --- GND2F --- APS2

    A

    CONNECTOR A (REF):

    PACKARD ELECTRIC "METRI-PACK" CONNECTORCONNECTOR & SEAL --- P/N 12066317TERMINAL (FEMALE) --- P/N 12103881WIRE SEAL ------------------ P/N 12052929

    CONNECTOR B:

    1 --- APS12 --- VCC1 (5V)3 --- GND14 --- APS25 --- VCC2 (5V)6 --- GND2

    AMP "SUPERSEAL" 1.5 SERIES CONNECTORCONNECTOR --- P/N 0-0282108-1TERMINALS ----- P/N 0-0282109-1WIRE SEAL ------ P/N 0-0281934-2

    1

    2

    [KPC]

    REVISIONS

    ZONE REV DESCRIPTION OF CHANGE APPROVED ECN NO. DATE

    ALL A INITIAL PRODUCTION RELEASE 011049 11/12/2014

    A3, A4, ALL- SH2, B

    IN NOTE 4 CLASS D WAS CLASS C & NOTE 5 ADDED; SHEET 2 ADDED, EXPLODED VIEW, BOM & OUTPUT GRAPH MOVED TO

    2 ND SHEET, ADDED TECHNICAL SPECIFICATIONS; ADDED PEDAL FORCE GRAPH & LOAD CIRCUIT DIAGRAM

    011161 12/10/2014

    ALL, SH2-C5,SH2-C5 C

    (1) UPDATED TITLEBLOCK, (2)ITEM 13, 402970 WAS 402522, (3) ITEM 12, 400179 WAS 401622 011806 06/05/2015

    3RD ANGLE PROJECTION

    THIS DOCUMENT IS PROPERTY OF AND CONTAINS THE PROPRIETARY INFORMATION OF WILLIAMS CONTROLS INDUSTRIES INC. AND/OR ITS SUBCONTRACTORS AND SUPPLIERS. IT IS TRANSMITTED IN CONFIDENCE AND TRUST AND IS TO BE USED SOLELY FOR THE PURPOSE FOR WHICH IT IS FURNISHED AND MAY NOT BE REPRODUCED WITHOUT SPECIFIC WRITTEN PERMISSION. THIS DOCUMENT MUST BE TREATED IN STRICT ACCORDANCE WITH THE TERMS AND CONDITIONS OF THE AGREEMENT UNDER WHICH IT WAS PROVIDED.

    WILLIAMS CONTROLS INDUSTRIES, INC.14100 SW 72ND AVENUEPORTLAND, OR. 97224(503) 684-8600 FAX (503) 624-3836

    UNLESS OTHERWISESPECIFIED, DIMENSIONS ARE IN

    MILLIMETERS PER ASME Y14.5-2009TOLERANCESXX.XX.XXANGLES

    FINISH (EXCEPT ASSEMBLIES):

    DRAWN:

    MODEL SERIES PROJECT

    MATERIAL:

    DATE:

    TITLE

    SIZE CAGE CODE DWG NO. REV

    SCALE SHEET 1 OF 2

    DWG NO. REV

    D 11331

    A

    B

    C

    D

    12345678

    7 46 38 5 1

    D

    C

    B

    THROTTLE ASSY-ELEC,FLOOR,35

    402262 C1:11821WM-558

    402262 C

    A

    SEE PARTS LIST

    0.800.300.150.5

    N/A

    KMS 07-31-13

    WARNING: THIS DOCUMENT (OR SOFTWARE) CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED BY TITLE 50 USC APP 2401 ET SEQ. VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CIVIL AND CRIMINAL PENALTIES.

  • APS1

    (15% 2%)

    (80% 4%)

    PEDAL ROTATION

    AP

    S O

    UTP

    UT

    (%V

    cc)

    (17)( 0)

    (40% 4%)

    (7.5% 2%)

    APS2

    (0) (17)

    FORCE(N)

    (45 7)

    (17 7)

    APS 2 LOAD CIRCUIT

    APS 1 LOAD CIRCUIT

    SENSOR #2

    SENSOR #1

    ENGINE CONTROL UNIT

    To ECUProcessor

    1500p

    +5V

    To ECUProcessor

    1500p100K

    GND2

    VCC2

    +5VPEDAL SENSOR

    GND1

    APS1

    VCC1

    ISOLATIONISOLATION

    .033

    .033

    22K

    22K

    100K

    APS2

    67

    12

    2X

    11

    5

    1

    8

    9

    4

    3

    2

    13

    16

    18

    17

    4

    TECHNICAL SPECIFICATIONS

    1.0 GENERAL

    1.1 COMPLIES WITH FMVSS-124 [KCC]

    2.0 MECHANICAL

    2.1 17 NOMINAL PEDAL ROTATION

    2.2 17 7 ACTUATION FORCE @ INITIAL TRAVEL FORCE (ITF)

    45 7 ACTUATION FORCE @ FULL PEDAL TRAVEL FORCE (FPTF)

    SEE FIGURE 1 FOR PEDAL FORCE GRAPH,

    2.3 LIFE EXPECTANCY 3 MILLION CYCLES

    3.0 ENVIRONMENTAL

    3.1 -40 C TO +85 C OPERATING TEMPERATURE

    3.2 PEDAL OPERATED AT 90% RELATIVE HUMIDITY AT 27C TO 75C

    3.4 REFER TO WDS-010 AND WCS-402262 FOR ALL ENVIRONMENTAL TESTING METHODS AND STANDARDS

    4.0 ELECTRICAL CHARACTERISTICS (SENSOR)

    4.1 5VDC 0.5VDC SUPPLY VOLTAGE

    4.2 10mA MAX CURRENT PER CHANNEL (20mA WHOLE SENSOR OPERATION)

    4.3 SEE FIGURE 2 FOR OUTPUT CHARACTERISTICS

    4.4 SEE FIGURE 3 FOR LOAD CIRCUIT PARAMETERS

    4.5 SEE WCS-402262 FOR ALL OTHER SENSOR SPECIFICATIONS

    LOAD CIRCUIT DIAGRAMFIGURE 3

    FORCE OUTPUTFIGURE 1

    ELECTRICAL OUTPUTFIGURE 2

    PEDAL ROTATION

    ITEM NO. DESCRIPTION MATERIAL QTY.

    PARTS LIST

    18 SCREW 8-32 X .31 PAN HEAD STEEL 1

    17 CLAMP, CABLE STEEL 1

    16 NUT, PUSH STEEL 1

    15 WIRE HARNESS, AL 6 PIN COMPOSITE 1

    13 SENSOR ASSEMBLY, BOLT-ON COMPOSITE 1

    12 SCREW, SENSOR STEEL 2

    11 MAGNET FERRITE 1

    9 ROLLER, PIN STEEL 1

    8 ROLLER PP COPOLYMER 1

    7 PIN, TREADLE, PLASTIC PLASTIC 1

    6 BASEPLATE, MACHINED ALUMINIUM 1

    5 PLASTIC SHAFT, SENSOR PTFE COPOLYMER 1

    4 SPRING, TORSION, RIGHT MUSIC WIRE 1

    3 SPRING, TORSION, LEFT MUSIC WIRE 1

    2 LEVER, PLASTIC PLASTIC 1

    1 TREADLE, MACHINED PLASTIC 1

    WILLIAMS CONTROLS INDUSTRIES, INC.14100 SW 72ND AVEPORTLAND, OR. 97224(503) 684-8600FAX (503) 624-3836

    DRAWN:

    MODEL SERIES PROJECT NO.

    DATE: SIZE CAGE CODE DWG NO. REV

    SCALE SHEET 2 OF 2

    DWG NO. REV

    D 11331

    A

    B

    C

    D

    12345678

    7 46 38 5 1

    D

    C

    B

    A

    402262 C1:11821WM-558

    402262 C

    KMS

    REVISIONS

    ZONE REV DESCRIPTION OF CHANGE APPROVAL ECN NO. DATE

    N/A SEE SHEET 1C 011806 06/05/2015

    07-31-13

  • ELECTRICAL OUTPUTS REFERENCE WCS-402196

    LABEL PER WQI-030-007LOCATE APPROXIMATELY AS SHOWN

    COMPLIANCE WITH FMVSS-124

    1

    2

    3

    NOTES - UNLESS OTHERWISE SPECIFIED:

    APS1

    CT1(22%)

    WOT1(84%)

    PEDAL ROTATION

    AP

    S O

    UT

    PU

    T V

    OLT

    AG

    E (

    %V

    cc)

    WOT(17)

    CT( 0)

    WOT2(42%)

    CT2(11%)

    APS2

    (ELECTRICAL OUTPUTS FOR CUMMINS