AKSESOUAR - ΛΑΣΠΟΤΗΤΕΣ ΦΤΕΡΑ

FENDER, SIDE EXTENSIONS, MUD GUARDS

5020, 5R, 6000, 6010, 6020, 6030, 6030 Premium, 7030 & 7030 E Premium, 7000, 7010, 7020, 7030, 8000, 8010, 8020, 8030 Series

John Deere Werke Mannheim Edition 07-2009 • EAME

TRACTORS

John Deere Werke Mannheim - Parts Business - EAME Edition - Status 07-2009 2

TURNABLE and RIGID FRONT fenders, REAR fenders, REAR Fender side extensions,

Mud flaps, Mud guards

CATALOGUE INDEX

TRACTOR SERIES PAGE

6020 & SE, 6030, 6030 Premium, 7030 Premium, 7030 E Premium.................. 3-8

6000, 6010........................................................................................................... 9-12

5020, 5R.…………………………………………………………………………........ 13-14

7000, 7010, 7020, 7030, 8020, 8030……………………………........................... 15-20


Front fenders, rear fenders, side extensions, mud guards 6020 & SE, 6030, 6030 Premium, 7030 Premium, 7030 E Premium Series tractors

FRONT FENDERS - INDIVIDUAL PARTS Additional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.

For safer high speed road transport and reduced tractor soiling. Large, full-coverage front fenders are available with a wide range of adjustments to adapt to the different tread settings to protect the cab from mud and debris.

Description Tractor Series Part No.

W 265 mm, L 1000 mm - RH or LH (2WD) 6020 & SE, 6015, 6030, 6025 AL180331

W 320 mm, L 1070 mm - RH or LH (MFWD) 6020 & SE, 6015 AL180328

W 370 mm, L 1280 mm - RH or LH (MFWD) 6020 & SE, 6015, 6030, 6030 Premium, 6025, 7030 & 7030 E Premium AL180330


W 420 mm, L 1315 mm - RH or LH (MFWD) 6020 & SE AL180329




W = Width, L = Length

Length

Width


TURNABLE FRONT FENDERS - FIELD INSTALLATION KITS Kits include turnable front fenders (RH & LH) plus the necessary hardware for field installation.

Turnable front fenders allow a better steering angle - for easier and faster turning e.g. on the headland - and therefore significantly better manoeuvrability of the tractor.

Please find on the next page more information regarding front fender widths and corresponding tyre sizes.

Description Tractor Series Part No. Remark

W 370 mm, L 1280 mm 6020 & SE, 6015, 6030, 6030 Premium, 6025, 7030 & 7030 E Premium AL180096





For tractors with front loader, please order in addition if required:

Fender stop panel 4 cyl.: 1 x AL165335 6 cyl.: 1 x AL165336

Conversion kit from RIGID to TURNABLE front fenders

- with MFWD axle 730: 6020-6220 - with MFWD axle 730: 6320-6420S, 6020SE-6420SE - with MFWD axle 740: 6520 & SE, 6620 & SE - with MFWD axle 745/750: 6820-6920S - for tractors with MFWD: 6030 Premium, 7030 & 7030 E Premium

AL175211

Depending on the tractor options additional parts may be required, please check corresponding parts catalogue.

W = Width, L = Length RIGID FRONT FENDERS - FIELD INSTALLATION KITS Kits include rigid front fenders (RH & LH) plus the necessary hardware for field installation.

Please find on the next page more information regarding front fender widths and corresponding tyre sizes.


W 265 mm, L 1000 mm (2WD only) 6020 & SE, 6015, 6030, 6025 AL180215

Base mounting kit for rigid front fenders (MFWD) 6020 & SE, 6015 AL71218

W 370 mm, L 1280 mm (MFWD) 6020 & SE, 6015, 6030, 6030 Premium, 6025 AL180095







Overview of TURNABLE front fender widths in combination with corresponding tyre sizes

TURNABLE fender width Tyre sizes

370 mm 4 cyl.: 11.2R24, 280/85R24, 12.4R24, 320/85R24, 13.6R24, 340/85R24, 11.2R28, 280/85R28, 12.4R28, 320/85R28, 13.6R28, 340/85R28

6 cyl.: 13.6R24, 340/85R24, 12.4R28, 320/85R28, 13.6R28, 340/85R28

420 mm 4 cyl.: 380/70R24, 14.9R24, 380/85R24, 420/70R24, 380/70R28, 14.9R28, 380/85R28, 420/70R28

6 cyl.: 14.9R24, 380/85R24, 420/70R24, 380/70R28, 14.9R28, 380/85R28, 420/70R28

480 mm 4 cyl.: 440/65R24, 480/65R24, 16.9R24, 420/85R24, 480/70R24, 480/65R28

6 cyl.: 480/65R24, 16.9R24, 420/85R24, 480/70R24, 480/65R28, 16.9R28, 420/85R28, 480/70R28, 16.9R30, 420/85R30, 480/70R30

540 mm 4 cyl.: 540/65R24, VF 520/60R28

6 cyl.: 540/65R24, VF 520/60R28, 540/65R28, 540/65R30, 540/75R28

620 mm 6 cyl.: VF 600/60R28, 600/65R28, VF 600/60R30

Overview of RIGID front fender widths in combination with corresponding tyre sizes

RIGID fender width Tyre sizes

370 mm 4 cyl.: 280/70R16, 10.5/80-18, 11.2R24, 280/85R24, 12.4R24, 320/85R24, 13.6R24, 340/85R24, 11.2R28, 280/85R28, 12.4R28, 320/85R28, 13.6R28, 340/85R28

6 cyl.: 13.6R24, 340/85R24, 12.4R28, 320/85R28, 13.6R28, 340/85R28

420 mm 4 cyl.: 380/70R24, 14.9R24, 380/85R24, 420/70R24, 380/70R28, 14.9R28, 380/85R28, 420/70R28

6 cyl.: 14.9R24, 380/85R24, 420/70R24, 380/70R28, 14.9R28, 380/85R28, 420/70R28

480 mm 4 cyl.: 440/65R24, 480/65R24, 16.9R24, 420/85R24, 480/70R24, 480/65R28

6 cyl.: 480/65R24, 16.9R24, 420/85R24, 480/70R24, 480/65R28, 16.9R28, 420/85R28, 480/70R28, 16.9R30, 420/85R30, 480/70R30

540 mm 4 cyl.: 540/65R24, VF 520/60R28

6 cyl.: 540/65R24, VF 520/60R28, 540/65R28, 540/65R30, 540/75R28

620 mm 6 cyl.: VF 600/60R28, 600/65R28


REAR FENDERS - INDIVIDUAL PARTS Additional parts are required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.


Rear fender - RH 6020 & SE, 6030, 6030 Premium, 7030 & 7030 E Premium

AL168326

Rear fender - LH 6020 & SE, 6030, 6030 Premium, 7030 & 7030 E Premium

AL168325

REAR FENDER SIDE EXTENSIONS - INDIVIDUAL PARTS Additional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.

Rear fender side extensions tractors provide…

Protection from mud, stones and debris Protection to avoid dirt on your tractor and on the following

vehicles Better visibility through clear windows Coverage also of large tyres An easy installation in a few work steps

The extensions can be combined with snow chains on rear wheels, for example for forestry applications.

Description Tractor Series Tyre size Part No.

110 x 15 mm - RH L200789

110 x 15 mm - LH

cab only: 6020 & SE, 6030, 6030 Premium, 7030 & 7030 E Premium

18.4R30, 16.9R34, 420/85R34, 480/70R34, 13.6R38, 18.4R38, 460/85R38 L200788

110 x 60 mm - RH L200784

110 x 60 mm - LH


16.9R30, 18.4R30, 16.9R34, 18.4R34, 480/70R34, 13.6R38, 14.9R38, 16.9R38, 420/85R38, 18.4R38, 460/85R38, 480/70R38, 520/70R38, 540/65R38 L200783

200 x 20 mm - RH L200797

200 x 20 mm - LH


520/70R38, 20.8R38, 520/85R38, 580/70R38, 600/65R38, 650/65R38 L200793

190 x 65 mm - RH L200787

190 x 65 mm - LH


520/70R34, 520/70R38, 20.8R38, 520/85R38, 540/65R38, 600/65R38, 650/65R38 L200785

Rear fender

Side extension


REAR FENDER SIDE EXTENSIONS - FIELD INSTALLATION KITS Kits include side extensions (RH & LH) plus the necessary hardware for field installation.

Description Tractor Series Tyre size Part No.

110 x 15 mm - RH & LH cab only: 6030, 6030 Premium, 7030 & 7030 E Premium 18.4R38, 460/85R38 AL174767

110 x 60 mm - RH & LH cab only: 6030, 6030 Premium, 7030 & 7030 E Premium

18.4R30, 16.9R34, 18.4R34, 480/70R34, 13.6R38, 14.9R38, 16.9R38, 420/85R38, 18.4R38, 460/85R38, 480/70R38, 520/70R38, 540/65R38

AL174768


520/70R38, 20.8R38, 520/85R38, 580/70R38, 600/65R38, 650/65R38 AL174769


520/70R34, 520/70R38, 20.8R38, 520/85R38, 540/65R38, 600/65R38, 650/65R38

AL174770

Mounting parts fender side extensions & mud guards

Order in addition, if required.

AL120094

MUD FLAP FOR REAR FENDERS - INDIVIDUAL PARTS Additional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.

Additional mud flaps significantly reduce the amount of spray and mud thrown up by the rear wheel. They provide additional protection to avoid dirt on your tractor and following vehicles which is especially important for heavy duty work and bad weather conditions. The result is a cleaner cab and better operator visibility.

Description Tractor Series Part No. Remarks

Mud flap - RH or LH cab only: 6020 & SE, 6030, 6030 Premium, 7030 & 7030 E Premium L156612

Can be combined with side extension: - 190 x 65 mm - 190 / 200 x 20 mm

MUD FLAPS FOR REAR FENDERS - FIELD INSTALLATION KIT Kit includes mud flaps (RH & LH) plus the necessary hardware for field installation.

Description Tractor Series Part No. Remarks

2 mud flaps - rear fenders

cab only: 6020 & SE, 6030, 6030 Premium, 7030 Premium, 7030 E Premium

AL159975 Can be combined with side extension: - 190 x 65 mm - 190 / 200 x 20 mm

Mud flap


MUD GUARDS FOR STEPS - INDIVIDUAL PARTS Additional parts are required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.

Mud guards for steps extend the coverage offered by the rear fenders. They are made from rugged material and protect the steps from mud and debris.


Mud guard - RH L116671

Mud guard - LH 4 cyl. models without suspended cab: 6020 & SE, 6030, 6030 Premium

L116670


Mud guard - LH

4 cyl. models with suspended cab: 6020, 6030 Premium

all 6 cyl. cab models: 6020 & SE, 6030, 6030 Premium, 7030 & 7030 E Premium L116672 MUD GUARDS - FIELD INSTALLATION KITS Kits include mud guards (RH & LH) plus the necessary hardware for field installation.


Mud guards - RH & LH 4 cyl. models without suspended cab: 6030, 6030 Premium AL174141

Mud guards - RH & LH 4 cyl. models with suspended cab: 6030 Premium

all 6 cyl. cab models: 6030, 6030 Premium, 7030 & 7030 E Premium AL174142

Mounting parts - fender side extensions & mud guards Order in addition, if required. AL120094


Front fenders, rear fenders, side extensions, mud flaps, mud guards 6000, 6010 Series tractors



W 265 mm, L 1000 mm - RH or LH (2WD) 6000 & SE, 6010 & SE, 6005 AL180331

W 320 mm, L 1070 mm - RH or LH (MFWD) 6000, 6010 AL180328

W 370 mm, L 1280 mm - RH or LH (MFWD) 6000 & SE, 6010 & SE AL180330

W 420 mm, L 1440 mm - RH or LH (MFWD) 6000 & SE, 6010 & SE, 6005 AL180327






TURNABLE FRONT FENDERS - FIELD INSTALLATION KITS Kits include turnable front fenders (RH & LH) plus the necessary hardware for field installation.


W 370 mm, L 1280 mm - RH & LH 6000 & SE, 6010 & SE AL180096

W 420 mm, L 1440 mm - RH & LH 6000 & SE, 6010 & SE, 6005 AL180098

W 480 mm, L 1440 mm - RH & LH 6000 & SE, 6010 & SE, 6005 AL180100

W 540 mm, L 1540 mm - RH & LH 6000 & SE, 6010 & SE AL180102



REAR FENDERS - INDIVIDUAL PARTS Additional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.

Description Tractor Models Part No. Remark

A Rear fender - RH L101648 with registration plate

A Rear fender - LH cab only: 6000, 6010

L101649 without registration plate

A Rear fender - RH L101643 without registration plate

A Rear fender - LH cab only: 6000, 6010

L101642 with registration plate

A Rear fender - RH L110271 with registration plate

A Rear fender - LH 6000SE, 6010SE

L110272 without registration plate

A Rear fender - RH L110885 without registration plate

A Rear fender - LH 6000SE, 6010SE

L110884 with registration plate

A Rear fender - RH L110885

A Rear fender - LH

with 2-post roll-guard: 6010 L110272

B Rear fender - RH L79685

B Rear fender - LH with 2-post roll-guard: 6000, 6010 L79683

C Rear fender - RH L77510

C Rear fender - LH 6000 & SE, 6010 & SE

L77511

RIGID FRONT FENDERS - FIELD INSTALLATION KITS Kit includes rigid front fenders (RH & LH) plus the necessary hardware for field installation.


W 265 mm, L 1000 mm (2WD) 6000 & SE, 6010 & SE, 6005 AL180215

Base mounting kit for rigid front fenders (MFWD) 6000 & SE, 6010 & SE, 6005 AL71218


A C

B




A Side extension - RH L101638

A Side extension - LH cab only: 6000 & SE, 6010 & SE

L101534

B Side extension - LH or RH cab only: 6000 & SE, 6010 & SE L101609

C Additional side extension - extra wide, LH or RH only in combination with A or B

cab only: 6000, 6010 & SE L110877



Mud flap - RH cab only: 6000, 6010 & SE L110876

Mud flap - LH cab only: 6000, 6010 & SE L110875

For tractors with fender side extensions (A or B see above) already installed.

MUD FLAP KIT FOR REAR FENDERS - FIELD INSTALLATION KIT Kits include mud flaps (RH & LH) plus the necessary hardware for field installation.


2 mud flaps - rear fenders

cab only: 6000, 6010 & SE AL81709 For tractors with fender side extensions (A or B see above) already installed.

B

A C

Mud flap

Side extension already installed


MUD FLAPS FOR REAR FENDERS / EXTRA WIDE - INDIVIDUAL PARTS Additional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.


Mud flap, extra wide - RH L110611

Mud flap, extra wide - LH

cab only: 6000, 6010 & SE

L110610

These mud flaps are recommended if one side extension, plus the additional side extension L110877 are already installed on each fender.

MUD GUARDS FOR STEPS - INDIVIDUAL PARTS Additional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.



Mud guard - LH

4 cyl. cab models: 6000, 6010 & SE

L111348


Mud guard - LH

6 cyl. cab models: 6000, 6010 & SE L111349


Front fenders, rear fenders, side extensions 5020 and 5R Series tractors



W 320 mm, L 1070 mm - RH or LH 5020 AL180328

W 370 mm, L 1280 mm - RH or LH 5020, 5R AL180330


W 420 mm, L 1315 mm - RH or LH 5020 AL180329


W = Width, L = Length TURNABLE FRONT FENDERS - FIELD INSTALLATION KITS Kits include turnable front fenders (RH & LH) plus the necessary hardware for field installation.

Description Tractor Series Part No. Tyre sizes

W 370 mm, L 1280 mm 5020, 5R LG102498 11.2R20, 12.4R24, 320/85R24, 11.2R28, 280/85R28

W 420 mm, L 1440 mm 5020, 5R LG102500 13.6R24, 340/85R24, 360/70R24, 380/70R24, 420/65R24

W 480 mm, L 1440 mm 5020, 5R LG102502 440/65R24

W = Width, L = Length RIGID FRONT FENDERS - FIELD INSTALLATION KITS Kits include rigid front fenders (RH & LH) plus the necessary hardware for field installation.


Base mounting kit for rigid front fenders 5020 LG100707

W 370 mm, L 1280 mm 5020, 5R LG102499

W 420 mm, L 1440 mm 5020, 5R LG102501

W 480 mm, L 1440 mm 5020, 5R LG102503





Rear fender - RH R252621

Rear fender - LH 5020, 5R

R252619

Rear fender - RH RE259007

Rear fender - LH vineyard tractor version only: 5020; 5RN

RE259006



Side extension RH 5020, 5R R180913

Side extension LH 5020, 5R R180912

REAR FENDER SIDE EXTENSIONS - FIELD INSTALLATION KIT Kit includes rear fender side extensions (RH & LH) plus the necessary hardware for field installation.


Rear fender side extension - RH & LH 5020, 5R LG100448

Rear fender

Side extension


Front fenders, rear fenders, side extensions, mud guards 7000, 7010, 7020, 7030 and 8020, 8030 Series tractors

FRONT FENDERS - INDIVIDUAL PARTS

Additional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.

Description Tractor Series Part No. Remark Order through

W 394 mm - RH or LH 7000, 7010, 8000

with 2WD only AR86406 EPDC

W 480 mm - RH or LH 7000, 7010, 7020 R192450 7020: up to serial no. 032704

W 480 mm - RH or LH 8000, 8010, 8020 R191189 8020: up to serial no. 015456

W 480 mm - RH 7020, 7030, 8020, 8030 RE223407

W 480 mm - LH 7020, 7030, 8020, 8030 RE223406

7020: from serial no. 032705


EPDC

W 620 mm - RH 7000, 7010, 7020, 8000, 8010, 8020 R192452

W 620 mm - LH 7000, 7010, 7020, 8000, 8010, 8020 R192451

7020: up to serial no. 032704

8020. up to serial no. 027762

W 620 mm - RH 7020, 7030, 8020, 8030 RE223409

W 620 mm - LH 7020, 7030, 8020, 8030 RE223408



EPDC

W = Width

2WD FRONT FENDERS - FIELD INSTALLATION KITS Kits include front fenders (RH & LH) plus the necessary hardware for field installation.

Description Tractor Series Part No. Order through

394 mm - RH & LH 7000, 7010 RE67850

394 mm - RH & LH 8000 RE67851 EPDC

W = Width


DELUXE TURNABLE FRONT FENDERS - FIELD INSTALLATION KITS Kits include turnable front fenders (RH & LH) plus the necessary hardware for field installation.


W 480 mm - RH & LH 7020 RE211530 7020: up to serial no. 032704

W 480 mm - RH & LH 7020, 7030 RE238910 7020: from serial no. 032705


W 620 mm - RH & LH 7020, 7030 RE238909 7020: from serial no. 032705

Complete Goods


W 480 mm - RH & LH 8020, 8030 RE236666 8020. from serial no. 015457 8030: up to serial no. 007241

W 480 mm - RH & LH 8030

with 1300 Series MFWD front axle only

RE260608 8030: from serial no. 007242

W 480 mm - RH & LH 8030


RE308214

W 480 mm - RH & LH 8020, 8030

with ILS*) only RE236667

Complete Goods


W 620 mm - RH & LH 8020, 8030 RE236669 8020: from serial no. 027763 8030: up to serial no. 007241

W 620 mm - RH & LH 8030

with 1300 Series MFWD axle only

RE260609 8030: from serial no. 007242

Complete Goods

W 620 mm - RH & LH 8030


RE308215

W 620 mm - RH & LH 8020, 8030

with ILS*) only RE236670

Complete Goods

*) ILS = Independent Link Suspension; W = Width




RH 7000 R110834

LH 7000 R110835 EPDC

RH 7010 R131968

LH 7010 R131969 without remote PTO

LH 7010 R176979 with remote PTO

EPDC

RH 8000 R111888

LH 8000 R111887 up to serial no. 009999

RH 8000, 8010 R131966

LH 8000, 8010 R131967 from serial no. 010000

EPDC

RH - without fender extension installed 7020, 7030, 8020, 8030 R162233

LH - without fender extension installed 7020, 7030, 8020, 8030 R162234

EPDC

RH - with fender side extension installed (2.50 m width)

7020, 7030, 8020, 8030 R163025

LH - with fender side extension installed (2.50 m width)

7020, 7030, 8020, 8030 R163026

EPDC

Rear fender




RH 7000 R114745

LH 7000 R106378 EPDC

RH 8000 R122008

LH 8000 R122007 up to serial no. 009999 EPDC

RH - 2.30 m width 7010, 8000, 8010 R130503

LH - 2.30 m width 7010, 8000, 8010 R130504

RH - 2.50 m width 7010, 8000, 8010 R130505

LH - 2.50 m width 7010, 8000, 8010 R130506

from serial no. 010000 EPDC

RH - 2.50 m width 7020, 8020, 8030 R162235

LH - 2.50 m width 7020, 8020, 8030 R162236 EPDC

RH 7030 R237642

LH 7030 R237645 EPDC

REAR FENDER SIDE EXTENSIONS - FIELD INSTALLATION KITS Kits include side extensions (RH & LH) plus the necessary hardware for field installation.


RH & LH - 2.50 m width 7020, 8020, 8030 RE210326

RH & LH - 2.50 m width 7030 RE253151 Complete Goods

Rear fender side extension (2.50 m width) 7030 Series shown Rear fender side extension

(2.50 m width) - 7010 Series shown


ADDITIONAL REAR FENDER SIDE EXTENSIONS / EXTRA WIDE - INDIVIDUAL PARTS Additional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.


B - extra wide - RH 2.75 m width 7030, 8030 R233543

B - extra wide - LH 2.75 m width 7030, 8030 R233544

The additional side extensions B can only be installed in combination with

side extensions A (see photo above).

If total vehicle width exceeds 2.55 m, extremity lighting is required (also

depending on national regulations).

Please check the corresponding parts catalogue for more details.

EPDC

ADDITIONAL REAR FENDER SIDE EXTENSIONS / EXTRA WIDE - FIELD INSTALLATION Kit includes additional side extensions (RH & LH) plus the necessary hardware for field installation.


B - extra wide - RH & LH

2.75 m width

7030, 8030 RE253154

The additional side extensions B can only be installed in combination with

side extensions A (see photo above).

If total vehicle width exceeds 2.55 m, extremity lighting is required (also

depending on national regulations).

Please check the corresponding parts catalogue for more details.

EPDC

B - Additional fender side extension -

extra wide (2.75 m)

A - Fender side extension (2.50 m)


MUD GUARDS FOR STEPS - INDIVIDUAL PARTS Additional parts may be required, e.g. rivets, washers, screws. Please check the corresponding parts catalogue for more details.


Mud guard - RH 7020, 7030, 8030 RE205744

Mud guard - LH 7020, 7030, 8030 RE205743 EPDC

MUD GUARD FOR STEPS - FIELD INSTALLATION KIT Kit includes mud guard (LH) plus the necessary hardware for field installation.


Mud guard for LH step 7020, 7030 RE215510 Complete Goods



Mud flap - RH 7000, 7010 R118067

Mud flap - LH 7000, 7010 R118068 EPDC

AKSESOUAR - ΛΑΣΠΟΤΗΤΕΣ ΦΤΕΡΑ

Documents

Transcript of AKSESOUAR - ΛΑΣΠΟΤΗΤΕΣ ΦΤΕΡΑ