A Complete Range of Industrial Process Solutions · SHREEJI ENTERPRISE” was established in...
Transcript of A Complete Range of Industrial Process Solutions · SHREEJI ENTERPRISE” was established in...
A Complete Range of Industrial Process Solutions
Shreeji Enterprise
Ξ Authorized Channel Partner Ξ
Dahej Godwon - 1100 Sq. fit.Panoli Godown - 2500 Sq. Mtr.Vapi Godwon III - 1500 Sq. fit.Ankleshwar Godwon IV - 200 Sq. Mtr.
We believe in building relationship through “Services with Smile”
We love to accept challenges.!!
Ξ Introduction Ξ
SHREEJI ENTERPRISE” was established in Ankleshwar in the year 1998. The Group has been around for16 years to put up its experience and expertise in major Industrial and building sector in providing pumping &engineering solutions. We are keeping South Gujarat at the forefront of engineering technology through our networkof sister concerns at Dahej, Vapi, Ankleshwar and Panoli. All geared to meet the requirements of our customers. Werepresent some of the reputed organizations around the world who are the market leaders for the respectiveproducts like INTERVALVE POONAWALL LTD, EL-O-MATIC INDIA PVT LTD, KEASER COMPRESSOR (I) PVT LTD,PARTH POLY VALVES PRIVAT LIMITED, AEROCHEM PIPES PVT LTD & FORBES MARSHALL HYD. PVT LTD.
“SHREEJI ENTERPRISE” provides state of the art equipment for the Industrial Sector withproducts as varied as Manual Valves, Control Valves, On-Off Valves Gauges,Instrumentation,Compressore,Steamline & Boiler Products, Pipes & Fittings, Hose Currogated, & All type Industrial Hardware Items. We areengaged in marketing, servicing & providing engineering solutions for all mechanical, electrical and automationproducts being closely associated with our principles, SHREEJI ENTERPRISE gives its customers access to thelatest developments in engineering field to meet the growing challenges in the market. Backed by our sales &service,
Managed by professionally experienced three directors backed up by team of more than 15 qualified & trainedengineers, technician, accountant & logistic personal. Fully Fledged Computerized Offices at Dahej, Ankleshwar,Panoli & Vapi Fully atomized with rack & stacker & overhead cranes godwon to store engineering products.
Detail
MOC/TYPE
Detail
MOC/TYPE
Detail
MOC/TYPE
Detail
MOC/TYPE
Detail
MOC/TYPE
Detail
MOC/TYPE
Size – 25NB to 1000NB, Pressure Rating – PN16 (Max.)Operating Temprature -25C to 220C (Depending on MOC)Operation - Self Acting
Body -WCB/SS/SPE.ALLOY, Disc. - WCB/SS/SPE.ALLOYSeat –PTFE/GFT/INCONEL/ANSI316, Shaft - AISI410/AISI316/174PH /SPECIAL.ALLOY
High Perf. Double Centric disc design Bu erfly Valve- IVTFX-F/T/M
Size – DN 80 to DN 600, Pressure Rating – ANSI 150#Operating Temprature, 50C to 220C for IVEX – F, 50C to 220C for IVEX – T50C to 600C for IVEX – M, Operation– Hand Lever,Gear Worm, Pneumatic / Electric Actuator
Body -WCB/SS/SPE.ALLOY, Disc. - WCB/SS/SPE.ALLOYSeat –PTFE/GFT/INCONEL/ANSI316, Shaft - AISI410/AISI316/174PH /SPECIAL.ALLOY
Rubber lined Bu erfly Valve with lugged body - IVTL
Size – DN 40 to DN 1200NB, Pressure Rating DN40 to DN 600 - PN16 (max.)DN 650 to DN 1200–PN10(max.), Operating Temprature -25C to 200C (depending on MOCOperation– Hand Lever,Gear Worm, Pneumatic / Electric Actuator
Body -WCB/SS/SPE.ALLOY, Disc. - WCB/SS/SPE.ALLOYSeat –PTFE/GFT/INCONEL/ANSI316, Shaft - AISI410/AISI316/174PH /SPECIAL.ALLOY
PTFE Lined Bu erfly Valve- IVTFE
Size – DN 50 to DN 300, Pressure Rating - PN10 (Max.)Seat – Replaceable Seat, Operating Temprature -25C to 200C (depending on MOCOperation– Hand Lever,Gear Worm, Pneumatic / Electric Actuator
Body -CI/SGI/WCB/SS/SPE.ALLOY, Disc. - CI/SGI/WCB/SS/SPE.ALLOYSeat – PTFE/GFT, Shaft - AISI410/AISI316/174PH /SPECIAL.ALLOY
INTERVALVE POONAWALLA LIMITED
General Purpose Bu erfly Valve - IVGK
Size – DN 40 to DN 1200, Pressure Rating DN40 to DN 600 - PN16 (max.)DN 650 to DN 1200–PN10(max.) Operating Temprature -25C to 200C (depending on MOC) Operation– HandLever,Gear Worm, Pneumatic / Electric Actuator
Body -CI/SGI/WCB/SS/SPE.ALLOY, Disc. - CI/SGI/WCB/SS/SPE.ALLOYSeat – NITRIAL/EPDM/ALL RUBBER, Shaft - AISI410/AISI316/174PH /SPECIAL.ALLOY
Double flanged Centric Disc Rubber Lined Butterfly Valves
Size range : DN 50 - DN 600, Pressure rating : PN2.5, PN 6 & PN 10,Temperature : -250C to 2000C (depending on MOC)Operation– Hand Lever,Gear Worm, Pneumatic / Electric Actuator
Body -CI/SGI/WCB/SS/SPECIAL ALLOY, Disc - SGI/WCB/SS/SPECIAL ALLOY,Seat - NITRILE/EPDM/ALL RUBBER, Shaft - AISI410/AISI316/17-4PH/SP.ALLOY
Single Plate Short Wafer Swing Check Valve – IVC/IVCT
Detail
MOC/TYPE
Detail
MOC/TYPE
Detail
MOC/TYPE
Detail
MOC/TYPE
Detail
MOC/TYPE
DetailSpecial End Connection Ball Valves3way Jacketed Ball ValvesFire Safe Ball ValvesOxygen Service Ball valveVeccum Service ball valvesIBR ball ValvesMotorized/Automated Ball Valves
Extended Stem Valves
Size – DN15 to DN300, Pressure Rating – ANSI Class 150, 300. 3pc, 600#,800# 15NB to 50NBOperating Temprature -25C to 200C (Depe. on MOC) Available in Regular port and reduce portOperation– Hand Lever, Gear Worm, Pneumatic / Electric Actuator
Body - WCB/CF8/CF8M/CF3/CF3M/LCB/ Special Moc. depending on lot Qty.Ball - WCB/CF8/CF8M/CF3/CF3M/LCB/ Special Moc. depending on lot Qty.Seat - PTFE/GFT
High Performance Ball valves Floating/Trunion Mounted Design – IV6F/ IV6T
Size – 15NB to 200NB for Reduced bore/full port, Pressure Rating – Class 900, 1500,2500Leakage class VI-Soft seat Class V-Metal SeatOperation– Hand Lever, Gear Worm, Pneumatic / Electric Actuator
Body – WCB,CF8,CF8M,CF3,CF3M, F304,316,CN7M,WCC,LCB,Ball – WCB,CF8,CF8M,CF3,CF3M, F304,316,CN7M,WCC,LCB,Seat - PTFE/GFT, Metal Seated
Two Piece Flanged End Ball Valves of Floa ng Seat Design – IV1F / IV3F
Size – DN15 to DN300, Pressure Rating – ANSI Class 150, 300.Operating Temprature -25C to 200C (Depe. on MOC) Available in Regular port and reduce portOperation– Hand Lever,Gear Worm, Pneumatic / Electric Actuator
Body - WCB/CF8/CF8M/CF3/CF3M/LCB/ Special Moc. depending on lot Qty.Ball - WCB/CF8/CF8M/CF3/CF3M/LCB/ Special Moc. depending on lot Qty.Seat - PTFE/GFT/METAL TO METAL
Special Valves
Three Piece Ball Valves of floa ng Seat Design - IV8F
Size – DN15 to DN50, Pressure Rating – ANSI #800, Available in Regular port and reduce portOperating Temprature -25C to 200C (Depending on MOC)Operation– Hand Lever
Body - A105/F304/F316/F304L/F316L/A20/Special MOC depending on lot qtyBall - Body - A105/F304/F316/F304L/F316L/A20/Special MOC depending on lot qtySeat - PTFE/GFT
3 Way Ball Valve– T1F/T3F/T8F
Size – 15NB to 200NB for Reduced bore/full portPressure Rating – Class 150, 300, 800, Leakage class VI-Soft seat, Class V-Metal SeatOperation– Hand Lever, Gear Worm, Pneumatic / Electric Actuator
Body – 105,WCB, CF8,CF8M,CF3, CF3M, F304,316,CN7M, Duplex SSBall – 105,WCB, CF8,CF8M,CF3, CF3M, F304,316,CN7M, Duplex SSSeat - PTFE/GFT
Detail
MOC/TYPE
Detail
MOC/TYPE
Detail
MOC/TYPE
Detail
MOC/TYPE
Detail
MOC/TYPE
Detail
MOC/TYPE
Globe Valve - IV GLC
Design Standard: BS 1873, Leakage: API 598, IBR Approval, Bolted Bonnet,OS&Y, Rising Stem, Non Rising,Size range : DN 50 - DN 450, Pressure rating : ANSI Class 150, 300, 600, 900Pressure seal design : Class 1500, 2500 upto 8", End Connection - Flangend & Butt weld end
MOC : Carbon Steel, SS304, SS316 and Special MOC depending on lot qtyOperation– Worm Gear/Electric & Pnumatic Actuator,
MOC: WCB/CF8/CF8M/CF3/CF3M/A20/LCB/Special MOC depending on lot qtyOperation - Self Acting
Forge Steel Gate/Globe/Check Valves
Design Standard: API 602, Leakage: API 598, Bolted BonnetSize range : DN 15 - DN 50, ANSI Class 800, 1500, 2500End Connection - Screweld, Socketweld, Butt weld end
MOC : A105/F304/F316/F304L/F316L/A20/Special MOC depending on lot qtyOperation– Hand Wheel
Flanged end double offset disc butterfly valves [IVDXR]
General Design - EN 593/BS 555/API 609/ IS 13095, Model - IVDXR-BFL/BF/BC/ACRange - DN 65 to DN 1800, Temprature - 0 to 180deg.Pressure Rating - PN1.00 to PN10
MOC: WCB/CF8/CF8M/CF3/CF3M/A20/LCB/Special MOC depending on lot qtyOperation - Hand Wheel, Gear Worm & Motorized
Swing Check Valves - IV SCC
Design Standard: BS 1868, Leakage: API 598, Bolted CoverSize range : DN 50 - DN 1200, Pressure rating : ANSI Class 150, 300, 600, 900Pressure seal design : Class 1500, 2500 upto 12", End Connection - Flangend End
MOC: WCB/CF8/CF8M/CF3/CF3M/A20/LCB/Special MOC depending on lot qty
Dual Plate Swing Check Valves - DPCV
Design Standard: API 594, Leakage: API 598Size range : DN 50 - DN 500, Pressure rating : ANSI Class 150, 300, 600, 900End Connection - Wafer Type Dual Plate
Gate Valves-IV GTC
Design Standard: API 600, Leakage: API 598, IBR Approval, Bolted Bonnet,OS&Y, Rising Stem, Non Rising,Size range : DN 50 - DN 1200, Pressure rating : ANSI Class 150, 300, 600, 900Pressure seal design : Class 1500, 2500 upto 12", End Connection - Flangend & Butt weld end
MOC: WCB/CF8/CF8M/CF3/CF3M/A20/LCB/Special MOC depending on lot qtyOperation - Hand Wheel, Gear Worm & Motorized
Detail
Range
Detail
Detail
Detail
Detail
Detail
Limite Switch
Limit Switches for ON/OFF indication are offered as per choice appli.Mechanical/ Micro – Switch -1NO+INC(SPOT),. - 2NO+2NC(SPOT)Proximity switches - Intrinsic safe / Non Intrinsic safe -AC/DC -1NO or 1 NC -2Wire/3Wire -2NO or 2 NCEnclosures are offered for-Weather Protection IP55/65/67, Axplosion proof IIA, IIB, IIC With CCOE,ATEX approval
Pneumatic Positioner
PNEUMATIC POSITIONER F10 - The Posiflex-Pneumatic Positioner is a simple, single stage, displacement balanceinstrument suitable for either linear or rotary actuators.ELECTRO-PNEUMATIC POSITIONER F20 :- he F20 is a universal Electro-Pneumatic Positioner, suitable for either linearor rotary actuators (single or double acting).The F20 Positioner operates on the principle of analog electronic comparison. An analog 4-20 mA input signal is usedto obtain an accurate position of the actuator.
Accessories
Air Filter RegulatorSolenoid ValvesPositionerNon Return ValveFlow Control ValveQuick Exhaust ValveAir Lock Valve, Equalisiting valve
Quartzoid BulbBreather BlockDouble Compress GlandPressure BoosterPU TubingSS TubingEtc.
Powerful, compact rack & pinion Pneumatic rotary quarter turn actuators in E & P seriesfor both the series option available is double acting & spring return type actuators
E - Series : E12 to E1600P - Series : P60 to P4000Torque : 12Nm to 5000 Nm
On-Off and Control Valves Systems
El-O-Matic Electric Rotary Actuators produce upto 2500 Nm of torque. They are available in three series, namely EL -actuators use worm and worm-wheel reduction gearing to provide tight positioning control and the self lockingfeature necessary for controlling larger valves, particularly butterfly types.
On-Off and Control Valves Systems
Remote operated valves with Pneumatic or Electric actuators for On/Off and modulating operation with necessarycontrol application of the industry,The systems are offered with butterfly, ball, plug or special purpose valves depending on the process conditionelements to suit the customers typical requirements.The system is tailor made to meet the requirement of the specificSuitable Valve of Ball/Butterfly/Gate/Globe/Plug & Etc.
ELOMATIC INDIA PVT LIMITED
Pnumatic Actuator
• Bolted Design, • Center Ported• Available Sizes: 1/2”, 1”, 1-1/2”, 2”, 3”, 4”• MOC Options : > Stainless Steel, Aluminum, Cast Iron, Alloy C> Elastomers – PTFE, Santoprene,Neoprene, Buna, EPDM, Viton• Flow Rate: 0- 238GPM• Maximum discharge Pressure – 125PSI• Can Handle Solids up to 9.5mm in size.• Air Distribution System (ESADS)• In-line Serviceable• Ball Type Check Valves
• Bolted Design • Porting Option – Center, Side & Dual• Available Sizes: 1/4”, 1/2”, 1”, 1-1/2”, 2”, 3”• MOC Options :> Polypropylene, Conductive Polypropylene, PVDF, Conductive PVDF,Conductive Acetal> Elastomers – PTFE, Santoprene,Neoprene, Buna, EPDM, Viton• Flow Rate: 0- 238GPM• Maximum discharge Pressure – 100PSI• Can Handle Solids up to 18mm in size.• Air Distribution System (ESADS)• In-line Serviceable• Ball Type Check Valves
• Better Priming Capabilities • Bolted Design• Bottom/Top/Side Porting Arrangement• Available Sizes: 1”, 1-1/2”, 2”, 3”, 4”• MOC Options : > Stainless Steel, Aluminum, Cast Iron, Alloy C•Elastomers –Santoprene, Neoprene, Buna, EPDM, Vition• Flow Rate: 0- 260GPM• Maximum discharge Pressure – 125PSI• Can Handle Solids up to 22mm in size.• Ball Type Check Valves
• Flap Type Check Valves• Bolted Design• Bottom Discharge PortingArrangement• Available Sizes: 1”, 2”, 3”, 4”• MOC Options :– Stainless Steel, Aluminum, Cast Iron– Elastomers –Santoprene,Neoprene, Viton• Flow Rate: 0- 260GPM• Maximum discharge Pressure – 125PSI• Can Handle Solids up to 80mm in size.
SANDPIPER AODD PUMPS (IDEX India Pvt. Ltd.)
Metallic Pumps
Non-Metallic Pumps
Hevy Duty - Ball Valve
Hevy Duty - Flap Valves
VIKING GEAR PUMPS (IDEX India Pvt. Ltd.)
INTERNAL GEAR PUMPS EXTERNAL GEAR PUMPS
MAG DRIVE PUMPS VANE PUMPS
Detail
DetailDS - Thread end Diaphragm seal PotES - Diaphragm chemical seal Extended modelFS - Flanged type Diaphragm sealSS - Diaphragm chemical seal SMS typeTS - Triclover Seal Pot
Detail
Detail
Detail
Detail
Every Angle Temperature Gauge
Available in dial sizes 100 mm, 150 mmCase material in SS & diecast AIRanges available from -20 to 600°CClass 2 as per DIN 16203Overload 130% of the rangeIP65Reference Std. EN 13190
Electric contact Pressure Gauges
Dial Size: 100/ 150 mmContact Rating: 1 A, 230 VACWith relay: SA, 230 VAC
Low Pressure Sensing Schaffer Diaphragm Pressure Gauges (SH)
Available in SS & AI caseAvailable in 100 mm (4") & 150 mm ( 6")Over range protection upto 130%Accuracy 1.6% to 2%IP65
Bourdon Type Pressure Gauges– SP/AP
2.5", 4", 6" and 10" dial size bayonet lockingOverload up to 1.3 times of FSProtection to IP65Accuracy to 1 % of FS as standard and 0.5% of FS as optionIBR approvedComplies with EN837-1Available in die cast case with above dial sizesExternal zero adjustment optionChemical Sealed Pressure Gauges
Gas Filled Stem Type Temperature Gauges (ST/AT)
Available in dial sizes 100 mm, 150 mmCase material in SS & diecast AIRanges available from -20 to 600°CClass 1 as per DIN 16203,Overload 130% of the rangeIP65,Reference Std . EN 13190Available in 250mm dial size in die cast AI case With contact as option
FORBES MARSHALL (HYD) PVT LTD
Detail
Detail
Detail
Detail
Detail
Detail
Pressure Transmi er with local display (FM-PT11 0)
Piezo-resistive sensorUnique conductive seal that eliminates internal wirebonding thus enhancing reliabilityZero & full scale adjusters are provided under the top coverUsed in areas requiring exact pressure measurementLow hysteresis and long term stabilityAccuracy 0.5%,Output 4 -20mA / 1.5V / 0.5V
Accessories
Snubber and Gauge SaverGauge Cock - 2-way/3-wayNeedle ValveSyphon - Types: Q, U, C & y / IBR as optionManifold Valves - 2-way, 3-way, 4-way & 5-way
Comparison Test Pumps
Ranges: 0-40 kg0-400 kg760 mm Hg to 0
Temperature Elements
RTD (PT-100)Sheath dia 6 / 8 / 9.5 / 12 / 14With Temperature Transmitter as optionWP IP65 / Ex-Proof / Flame Proof
Thermowells(Barstock / Fabricated -Threaded / Flanged)
Circular Chart Recorders
Pressure / Temperature / CompoundWith Temperature Transmitter as optionChart Size 250 mmSingle Pen / Double Pen
Pressure Transmi ers Features (FM-PT1 000 & FM-PT100)
Ceramic core element, Low costCompact structure, Simple installationMeasuring ranges from 0 to 1 bar, 0 to 600 barMeasuring accuracy of + 0.5%FS (+ 0.2% optional)High accuracy, high stabilityThe output of pressure transducers is 4 to 20mA / 0 to 5V (or) 1 to 5 V.Wide operating temperature range
Detail
Detail
Detail
Detail
Detail
DetailDesign – 3pc design, full bore, Borosil glass, Teflon seated.End Conn. – Flanged as per ANSI B16.5(150#)MOC. – PP, ISOTACTIC PP, PVDFSize Range -: 3/4” to 6”,Working Pressure – Body – 150PSI Temp.– 80C
Design – Ball Type Soft SeatedEnd Conn. – Flangend as per ANSI B16.5(150#),BS10, D/E/F, DIN STD. Screweld (BSP)MOC. – PP, ISOTACTIC PP, PVDFSize Range – Flangend : 1” to 8”, Screweld : 1” to 4”Working Pressure – Body – 150PSI Seat – 100PSI Temp.– 80C
Non Return Valves
Design – Ball Type Soft SeatedEnd Conn. – Flangend as per ANSI B16.5(150#),BS10, D/E/F, DIN STD. Screweld (BSP)MOC. – PP, ISOTACTIC PP, PVDFSize Range – Flangend : 1” to 8”, Screweld : 1” to 4”Working Pressure – Body – 150PSI Seat – 100PSI Temp.– 80C
Wafer Type Butterfly Valves
Design – Wafer type, Single Piece bodyEnd Conn. – wafer, suitable flange of as per ANSI B16.5(150#)MOC. – PP, ISOTACTIC PP, PVDFSize Range -: 3” to 8”,Working Pressure – Body – 150PSI Seat – 100PSI Temp.– 80C
Flow Indicators [Sight Glass ]
PARTH POLY VALVES P. LTD / AEROCHEM PIPING PVT. LTD
Ball Valves
Design – 3pc design, Reinforced Ball, Teflon Seated, Full BoreEnd Conn. – Flangend as per ANSI B16.5(150#),BS10, D/E/F, DIN STD. Screweld(BSP)MOC. – PP, HDPE, ISOTACTIC PP, PVDFSize Range – Flangend : ½” to 8”, Screweld : ½” to 4”Working Pressure – Body – 150PSI Seat – 100PSI, Temp.– 80C
Diaphragam Valves
Design – Weir type design, soft seated, raising stemEnd Conn. – Flangend as per ANSI B16.5(150#),BS10, D/E/F, DIN STD. Screweld (BSP)MOC. – PP, ISOTACTIC PP, PVDFSize Range – Flangend : ½” to 4”, Screweld : ½” to 1”Working Pressure – Body – 150PSI Seat – 100PSI Temp.– 80C
Ball Type Foot Valves
Detail
Detail
Detail
CHARACTERISTICS• Corrosion Resistant • Flexible • Tough• Chemically Inert • Abrasion Resistant • Smooth Surface• Easy & Quick InstallationAPPLICATIONS :• Slurry Transportation• Potable Water Supply• Industrial Effluents• Irrigation / Agriculture• Sewerage & Drainage• Sprinkler System• Gas Transmission
HDPE PipeAERO' HDPE PIPES IS : 4984 : 1995,MATERIAL GRADE PE63, PE 80 & PE 100AVAILABLE SIZE : 20 MM to 315 MMPRESSURE RATING - PN2.5 to PN10AVAILABLE IS COIL FORM UP TO 110MM
PP/PP-H PipeAERO' PP / PPH PIPES AS PER DIN : 8077AVAILABLE SIZE : 20 MM to 315 MMPRESSURE RATING - PN2.5 to PN16
SPADE, SCOOP, SHOWEL WITH HANDLE, P. P. IMPELLER, FILTER PRESS COKE WITH RUBBER, POLE RINGS (TowerPacking), CHEMICAL DRYER TRY, ELECTRO PLATING FILTER PLATE, PP MOULDED FITTINGS, NUT - BOLT & WASHER,COOLING TOWERS NOZZLES, MIRROR AND WELDING GUN, PP LEVEL INDICATOR ASSEMBLY SET, SAMPLER
AERO Pipes
Stainer "Y" Type
Design – Single PC Body.End Conn. – Flangend as per ANSI B16.5(150#),BS10, D/E/F, DIN STD. Screweld (BSPMOC. – PP, ISOTACTIC PP, PVDFSize Range -: 1” to 4”,Working Pressure – Body – 100PSI Temp.– 80C
Pipe Fittings
Long Neck (Stubend), Extra Long Neck, Moulded Elbow(90deg.), Moulded Equal TeeSliopn Flange, Blind Flange, Reducer, Enc Cap, Pipe Nipple, Hose Nipple, Couping and Etc.Range - 1/2" to 24",Pressure rating - PN6 & PN10MOC - PP, HDPE, PPH, PVDF
Plastic Engieering Products
KAESER product range in the Air Compressor group comprises:- Stationary Screw Compressors - 9 to 2950 cfm / 3.5 to 15 bar(g) / 2 to 500 Kw- Variable Speed Drive Screw Compressors with frequency control - up to 500 Kw- Stationary reciprocating compressor – 3 to 120 cfm / 0.55 to 18.5 kW- High pressure booster compressors - up to 45 bar(g)- Stationary Dry screw Compressor – 450 to 1800 cfm / 3 to 10 bar(g)- Rotary Blowers - 50 to 4650 cfm- Vacuum pumps - 170 to 550 cfm- Portable compressors- Dental Compressors- Breathing air compressor systems- Refrigeration and Desiccant air dryers- Compressed air filtration & Condensate Treatment Systems
Apart from above product range, we also offer complete turnkey solutions for all your compressed air needs.Thus becoming the single source who can offer
KAESER Compressors (India) Pvt. Ltd.
Kaeser Compressor KAESER Kompressoren SE, Germany, world leader in manufacturing Air Compressors and Compressed Air
products are now in India as KAESER Compressors (India) Pvt. Ltd. The purpose of starting operations in India is to provide all the necessary techno-commercial support to ouresteemed users and the required pre-sales service to our prospective clients. The compressors and allied equipmentmanufactured by KAESER cover a broad range and find applications in all industries ranging from General Engineering,Cement, Steel, Pharmaceuticals, Automobile Industry, Textiles, Printing Machinery, Electronic Industry etc.
TOTAL SOLUTION OF COMPRESSED AIR REQUIREMENT
Ø Hoses & Bellow Rubber Hose, Chemical Hose, Stem Hose, Hi-Pressur Hose, SS Wire Braided Corrugated Hose, PTFE Lined Hose, Bellow, PVC Green, Nylon Wire Braided, Metal Braided Etc.Ø Teflon, Rubber and Plastic Product
Sheet, Bush, Rod, Gasket, O- ring, Bellow, Cord, Tubing, Diaphragm, and all type of Ind. Moldings and Mechanical Parts.Ø Pipe and Pipe Fittings MS/SS/GI/CS/PP/HDPE/PP-H/PVDF/UPVC Pipe, And Pipe Fittings.Ø Fasteners Hex Head, Allen Cap, CSK, Grub, Foundation Bolt, Nut and Stud in Moc MS/SS/GI/H.T.- /HDG.Ø Transmission Product Coupling, Chain, Pulley, Sprocket, Bearing, V-Belt, Etc.
PRAMUKH VALVES & SERVICE at Ankleshwar, we have work of all type Industrialvalves Repairing & Services.
PRAMUKH VALVES & SERVICE in one of the landing industrial valves repairers based in Ankleshwarwith modern state-of-art equipment’s to repair any make, type and size of valves. We provide a varietyof customized valves repairing services both on-site at customer`s installation and at our work.
Valves Types Repaired: Ball valves Butterfly valves Gate, globe & check valves Control valves On-Off Valves Pressure reducing valves Safety Valves Plug Valves Sluice Gate Valves High performance butterfly valves Stop check/Non return valves Flush Bottom Valves Blow down valves Flow Indicators [Sight Glass] Positioner, Actuator, Gear Box, etc.
We provide repairing and servicing job for all type Industrial Manual & ControlValves job with best quality and delivery.Our workshop at Ankleshwar with fully range machinery, tools and testing equipment’s.
We are also dealing with other industrial products…
|| Sister Concern ||
Pramukh Valves & ServiceSpecialist in :- All type of Industrial Valves Services & Reparings
Ξ Clinte Ξ
Visit us .- www.shreejivalves.com
Reg. OfficeB-203, Shree Rang Residency,30mtr Road, G.I.D.C. Ankleshwar–393002Dist. Bharuch. Gujarat. India
Corpo. OfficeShop No. 27, Anamika Complex,I.P.C.L. Road, G.I.D.C. Ind. Estate,Dahej.-392130 Dist. Bharuch. Gujarat, India
SHREEJI ENTERPRISEPH-02641-256643,+91 94090 72743,Email - [email protected] – [email protected]
MANUAL, CONTROL & ON-OFF VALVES & AUTOMATION SYSTEMS, AODD PUMPS & GEAR PUMPS,INSTRUMETIONS & COMPRESSOR STEAMLINE PRODUCTS, PIPES & FITTINGS, HOSES & CORRUGATED
Pramukh Valves & ServicesPlot No - 1810Nr. Rajvi Cinema, G.I.D.C. Ind. Estate.Ankleshwar–393002 Dist. Bharuch. Gujarat. India
Akshardeep EngineersF-106, 1st Floor. Rajkamal Arcade,Opp. Megha Automobile, Old N.H.No.8,Ankleshwar-393002 Dist. Bharuch. Gujarat, India
|| Sister Concern ||