Model Size De scrip tion Ω FsHz

Qts VasLtrs

Xmaxmm

PowerWatts

dB CostEach

Soft and Hard dome tweet ers

TM010A1 Mi cro Series10mm poly mer dome, 4 ohm 4 3000 - - 0.25 25 85 $6.70

TW010F1 10mm poly mer dome, 74mm round flange 8 3000 - - 0.25 25 90 $5.75

TW025A0 25mm tex tile dome, 100mm round flange (3.93") 8 1090 - - 0.65 55 90 $28.25

TW025A1-12x9 25mm tex tile dome, ferrofluid cooled, 12 x 9 cm frame 8 1200 - - 0.65 70 90 $32.05

TW025A2 25mm tex tile dome, 100mm round flange, 4 ohm 4 1090 - - - 55 92 $28.25

TW025A20 25mm Ti ta nium dome, Neo dym ium mag net, heat sink 8 1137 - - - 100 93 $103.25

TW025A26 25mm tex tile dome, Neo dym ium mag net, heat sink 8 1126 - - - 100 94 $96.70

TW025A28 25mm gold plated dome tweeter, Neo dym ium mag net, heat sink 8 1017 - - - 100 95 $108.90

TW034X0 34mm tex tile dome, 132mm flange, high efficiency 8 800 - - 0.25 70 93 $72.05Re pair parts for Audax tweeters

RW025A0 Re place ment voice coil for TW025A0 8 $18.20

RW025A2 Re place ment voice coil for TW025A2 4 $18.20

RW034X0 Re place ment Voice coil for TW034X0 tweeter 8 $40.10Ref er ence Se ries Car bon Fi ber Cone and Aerogel Cone Drivers - Cast Frame, Rub ber Sur round

HM100C0 4" Car bon Fi ber Cone mid/bass 8 54 0.21 6.4 1.8 40 89 $81.75

HM130C0 5.25" Car bon Fi ber Cone mid/bass 8 46 0.31 18.1 3 50 90 $89.20

HM170C0 6.5" Car bon Fi ber Cone mid/bass 8 42 0.32 30.6 3 60 90 $99.10

HM210C0 8" Car bon Fi ber Cone woofer 8 31 0.42 83.1 4.15 70 90 $136.00

HM100Z0 4" Aerogl Coated Pa per Cone midrange with phase plug 8 250 0.81 0.84 1.25 40 93 $78.90

HM130Z10 5.25" Aerogel Coated Pa per Cone mid/bass with phase plug 8 63.5 0.25 8.89 2 50 90.2 $86.10

HM170Z18 6.5" Aerogel Coated Pa per Cone mid/bass with phase plug 8 38.9 0.34 35.4 3.25 60 89.3 $116.25Pro fes sional Se ries Midrange Speakers

PR125T1 1" tex tile dome horn tweeter, 96dB 8 1170 - - 0.7 70 96 $36.65

PR170M0 6.5" Pa per Cone midrange, 100dB 8 117 0.51 5.5 0.5 100 100 $83.30

PR170N0 6.5" Coated Pa per Cone Midrange 8 $83.30

TM010A1 • 10mm Polymer DomeTweeter

• Formerless VC• Ferrofluid cooled• 1st order above 6K• Ultra compact • Flange 29.5mm• Cut-out 29.5mm

(no mounting flange)• Depth 14mm

Znom 4 ohmRe 3.4 ohmLe@1kHz .01 mHfs 3000 HzQms -Qes -Qts -Mms .13 gCms - mm/N

Sd .03 cm2

BL 1 N/AVas - ltrsXmax 0.25 mm peakVC Ø 10 mmSen si tiv ity 1W / 1m 85 dBNom. Power DIN 25 WNet weight 0.01 kg

TW010F1 • 10mm Polymer DomeTweeter

• Formerless VC• Ferrofluid cooled• 1st order above 6K• Exceptional transient

response• Flange 74mm• Cut-out 48mm• Depth 14.4mm

Znom 8 ohmRe 5.5 ohmLe@1kHz .03 mHfs 3000 HzQms -Qes -Qts -Mms .11 gCms - mm/N

Sd .03 cm2

BL 1.3 N/AVas - ltrsXmax 0.25 mm peakVC Ø 10 mmSen si tiv ity 1W / 1m 90 dBNom. Power DIN 25 WNet weight 0.05 kg

TW025A0 • 25mm Textile DomeTweeter

• 8 ohms• Extended response• Replaceable voice coil• Aluminum faceplate• Flange 100mm• Cut-out 75mm• Depth 23.5mm

Znom 8 ohmRe 5.8 ohmLe@1kHz .03 mHfs 1090 HzQms 4.21Qes 1.3Qts 1Mms - gCms - mm/N

Sd 4.91 cm2

BL 1 N/AVas - ltrsXmax 0.65 mm peakVC Ø 25 mmSen si tiv ity 1W / 1m 90 dBNom. Power DIN 55 WNet weight 460 g

TW025A2 • 25mm Textile DomeTweeter

• 4 ohms• Extended response• Replaceable VC• Aluminum face plate• Flange 100mm• Cut-out 75mm• Depth 23.5mm

Znom 4 ohmRe - ohmLe@1kHz - mHfs 900 HzQms -Qes -Qts -Mms - gCms - mm/N

Sd 4.91 cm2

BL - N/AVas - ltrsXmax 0.65 mm peakVC Ø - mmSen si tiv ity 1W / 1m 93 dBNom. Power DIN 55 WNet weight - kg

TW025A1-12x9 • 25mm Titanium DomeTweeter

• Neodymium magnetwith heat sinks

• Solid aluminum faceplate

• Flange 120 x 90 mm• Cut-out 76 mm• Depth 32 mm

Znom 8 ohmRe 5.8 ohmLe@1kHz - mHfs 1200 HzQms -Qes -Qts -Mms 0.29 gCms - mm/N

Sd 4.91 cm2

BL - N/AVas - ltrsXmax - mm peakVC Ø 25 mmSen si tiv ity 2.83V / 1m 90 dBNom. Power DIN 70 WNet weight 460 g

TW025A26 • 25mm Textile DomeTweeter

• Neodymium magnetwith heat sinks

• Solid aluminum faceplate

• Chambered back• Flange 100 mm• Cut-out 76 mm• Depth 32 mm

Znom 8 ohmRe 6.1 ohmLe@1kHz - mHfs 1126 HzQms 1.52Qes 0.54Qts 0.40Mms - gCms - mm/N

Sd 4.91 cm2

BL - N/AVas - ltrsXmax - mm peakVC Ø 25 mmSen si tiv ity 2.83V / 1m 94 dBNom. Power DIN 100 WNet weight - g

HM100C0 • 4” Carbon Fiber ConeMid-bass

• Diecast basket• Rubber surround• Kapton VC former• Venting under spider• Gold plated terminals• Flange 110mm square• Cut-out 94mm • Depth 57mm

Znom 8 ohmRe 6.4 ohmLe@1kHz .11 mHfs 54 HzQms 3.27Qes 0.22Qts 0.21Mms 5.1 gCms - mm/N

Sd - cm2

BL 6.96 N/AVas 6.4 ltrsXmax 1.8 mm peakVC Ø 25 mmSen si tiv ity 1W / 1m 89 dBNom. Power DIN 40 WNet weight .93 kg

HM130C0 • 5.25” Carbon FiberCone Mid-bass

• Diecast basket• Rubber surround• Kapton VC former• Venting under spider• Gold plated terminals• Flange 136mm square• Cut-out 115.44mm• Depth 65mm

Znom 8 ohmRe 6.2 ohmLe@1kHz .39 mHfs 46 HzQms 3.6Qes .34Qts .31Mms 6.9 gCms - mm/N

Sd - cm2

BL 5.97 N/AVas 18.1 ltrsXmax 3 mm peakVC Ø 25 mmSen si tiv ity 1W / 1m 90 dBNom. Power DIN 50 WNet weight 1.4 kg

TW025A28 • 25mm Gold PlatedDome Tweeter

• Neodymium magnetwith heat sinks

• Solid aluminum faceplate

• Curve 2.83V@0.5m• Flange 100 mm• Cut-out 76 mm• Depth 32 mm

Znom 8 ohmRe 5.69 ohmLe@1kHz - mHfs 1017 HzQms 2.97Qes 0.73Qts 0.59Mms - gCms - mm/N

Sd 4.91 cm2

BL - N/AVas - ltrsXmax - mm peakVC Ø 25 mmSen si tiv ity 2.83V / 1m 94 dBNom. Power DIN 100 WNet weight - g

TW034X0 • 34mm Textile DomeTweeter

• Extended frequencyresponse

• Replaceable VC• Solid aluminum face

plate• Flange 132mm• Cut-out 106mm• Depth 29mm

Znom 8 ohmRe 5.3 ohmLe@1kHz - mHfs 800 HzQms -Qes -Qts -Mms 0.5 gCms - mm/N

Sd 10.8 cm2

BL 3.5 N/AVas - ltrsXmax 0.25 mm peakVC Ø 34 mmSen si tiv ity 1W / 1m 93 dBNom. Power DIN 70 WNet weight 1180 g

HM100Z10 • 4” Aerogel ConeMidrange

• Diecast basket• Rubber surround• Phase plug• Venting under spider• Gold plated terminals• Flange 110mm square• Cut-out 94mm • Depth 57mm

Znom 8 ohmRe 6.4 ohmLe@1kHz 0.19 mHfs 250 HzQms 4.26Qes 0.99Qts 0.81Mms 2.5 gCms - mm/N

Sd 52 cm2

BL 4.7 N/AVas 0.84 ltrsXmax 1.25 mm peakVC Ø 25 mmSen si tiv ity 1W / 1m 93 dBNom. Power DIN 40 WNet weight 1.0 kg

HM130Z10 • 5.25” Aerogel ConeMid-bass

• Diecast basket• Rubber surround• Phase plug• Venting under spider• Gold plated terminals• Flange 136mm square• Cut-out 115.44mm • Depth 65mm

Znom 8 ohmRe 6.2 ohmLe@1kHz .69 mHfs 63.5 HzQms 2.69Qes 0.33Qts 0.25Mms 6.89 gCms - mm/N

Sd 81 cm2

BL 7.16 N/AVas 8.9 ltrsXmax 2 mm peakVC Ø 25 mmSen si tiv ity 1W / 1m 90.2 dBNom. Power DIN 50 WNet weight 1.1 kg

HM170C0 • 6.5” Carbon Fiber ConeMid-bass

• Diecast basket• Rubber surround• Kapton VC former• Venting under spider• Gold plated terminals• Flange 166 mm square• Cut-out 145 mm • Depth 70 mm

Znom 8 ohmRe 6.3 ohmLe@1kHz 0.24 mHfs 42 HzQms 4.16Qes 0.35Qts 0.32Mms 12.4 gCms 1.2 mm/N

Sd 136 cm2

BL 7.6 N/AVas 30.6 ltrsXmax 3 mm peakVC Ø 30 mmSen si tiv ity 1W / 1m 90 dBNom. Power DIN 60 WNet weight 1.7 kg

HM210C0 • 8” Carbon Fiber ConeMid-bass

• Diecast basket• Rubber surround• Kapton VC former• Venting under spider• Gold plated terminals• Flange 210 mm square• Cut-out 186.5 mm• Depth 89 mm

Znom 8 ohmRe 6.5 ohmLe@1kHz 0.42 mHfs 31 HzQms 5.17Qes 0.42Qts 0.39Mms 23.5 gCms 1.1 mm/N

Sd 232 cm2

BL 8.5 N/AVas 83.1 ltrsXmax 4.15 mm peakVC Ø 40 mmSen si tiv ity 1W / 1m 90 dBNom. Power DIN 70 WNet weight 2.1 kg

PR170N0 Nextel • Professional 6.5” Nextel Coated Paper Cone Mid

• Diecast basket• Flat Foam surround• Kapton VC former• Edgewound 40mm VC• Gold plated terminals• Flange 190mm square• Cut-out 145mm• Depth 76mm

Znom 8 ohmRe 6.2 ohmLe@1kHz .73 mHfs 117 HzQms 3.16Qes 0.61Qts 0.51Mms 9.17 gCms - mm/N

Sd 139 cm2

BL 8.24 N/AVas 5.5 ltrsXmax 0.5 mm peakVC Ø 40 mmSen si tiv ity 1W / 1m 96 dBNom. Power DIN 100 WNet weight 2.5 kg

PR170M0 Paper • Professional 6.5” PaperCone Midrange

• Diecast basket• Flat Foam surround• Kapton VC former• Edgewound 40mm VC• Gold plated terminals• Flange 190mm square• Cut-out 145mm• Depth 76mm

Znom 8 ohmRe 6.2 ohmLe@1kHz .73 mHfs 117 HzQms 3.16Qes 0.61Qts 0.51Mms 9.17 gCms - mm/N

Sd 139 cm2

BL 8.24 N/AVas 5.5 ltrsXmax 0.5 mm peakVC Ø 40 mmSen si tiv ity 1W / 1m 100 dBNom. Power DIN 100 WNet weight 2.5 kg

Specs are from PR170M0.

PR125T1 Horn • 25mm Textile DomeTweeter

• High Efficiency 96dB• Replaceable VC• Ferrofluid cooled• High impact polymide

horn flare• Flange 100 mm• Cut-out 80 mm• Depth 58 mm

Znom 8 ohmRe 5.5 ohmLe@1kHz .11 mHfs 1170 HzQms -Qes -Qts -Mms 0.5 gCms - mm/N

Sd - cm2

BL - N/AVas - ltrsXmax 0.7 mm peakVC Ø 25 mmSen si tiv ity 1W / 1m 96 dBNom. Power DIN 70 WNet weight 500 g

HM170Z18 • 6.5” Aerogel ConeMid-bass

• Diecast basket• Rubber surround• Phase plug• Venting under spider• Gold plated terminals• Flange 166mm square• Cut-out 145mm• Depth 70mm

Znom 8 ohmRe 5.7 ohmLe@1kHz .72 mHfs 38.9 HzQms 4.07Qes 0.38Qts 0.34Mms 11.71 gCms - mm/N

Sd 138 cm2

BL 6.58 N/AVas 35.4 ltrsXmax 3.25 mm peakVC Ø 30 mmSen si tiv ity 1W / 1m 89.3 dBNom. Power DIN 60 WNet weight 1.3 kg