Post on 24-Oct-2014
Hydrozyklon_engl_09 25.03.2009 10:33 Uhr Seite 2
Probedruck
C M Y CM MY CY CMY K
HYDROCYCLONESTYPE: AKA-VORTEX
APPLICATIONS FOR CUT SIZE RANGES d50 FROM 2μm UP TO 180μm
INTEGRATED SYSTEMS FORHYDROCYCLONES AND DISTRIBUTORS
Hydrozyklon_engl_09 25.03.2009 10:33 Uhr Seite 3
Probedruck
C M Y CM MY CY CMY K
Hydrocyclones inClosed Mill Circuits
Optimum separation characteristic at varying operationparameters• Adequate and proven design• Homogeneous distribution of feed slurry to every hydrocyclone in operation
Long life time of hydrocyclones and distributors due toappropriate material of construction for each application• Hydrocyclones made of adapted materials like: high wear resistant polyurethane, Oxyd- or SiC-ceramic, NiHard, Titanium.• All surfaces of the distributor in contact with the slurry can be protected with highly chemical and corrosion resistant liners (f.e. Rubber, PU, Ceramic).
Simple to operate• Hydrocyclones in modular construction• Fast and trouble-free changing of wear parts• Easy adaptation of geometrical proportions• Low weight of single parts
AKA-VORTEX Hydrocyclones are successfully in operationfor classification of• Minerals, like Kaolin, Feldspar, Talcum, Chalk, Quartz, Gypsum, Bentonite, Zircon• Ores, like Iron ore, Bauxite, Zinc ore, Tin ore, Manganese ore, Chromite ore, Niobium-Tantalite-Ore• Interstage products of chemical processes• Alumina• Mineral residues and by-products, like Foundry sand, slag, Si-SiC-slurry, abrasives
Hydrocyclones forCounter-Current Washing
Hydrocyclones forMulti-Stage Classification
APPLICATIONS
a. b. c.
MINING, CHEMICAL INDUSTRY AND ENVIRONMENTAL PROTECTION
Hydrozyklon_engl_09 25.03.2009 10:33 Uhr Seite 4
Probedruck
C M Y CM MY CY CMY K
AKA-VORTEX Hydrocyclones are as diverse as your requirements
Type
RWK 21
RWK 42
RWS 75
RWS 105
RWT 1530
KRS 2128
TRT 2128
KRS 3128
RWT 4118
TRT 4118
RWT 5118
RWN 6518
RWH 8124
NSW 92.30
RWZ 102.30
RWZ 150.28
RWZ 240.28
* dT50 valid for sand slurries with solids concentration 1–10 weight-%
Nominal-Ø mm
10
20
35
50
75
100
100
150
200
200
250
325
400
450
500
750
1200
Cut Size dT50 in μm*
2-4
3-5
4-8
5-15
12-18
14-26
14-26
25-35
30-50
30-50
45-60
55-70
60-90
65-95
80-120
100-150
120-180
Pressure drop in bar
2,5-4,0
2,0-3,5
1,5-3,5
1,5-3,0
1,5-2,5
1,5-2,5
1,5-2,5
1,5-2,5
1,0-1,7
1,0-1,7
1,0-1,7
0,8-1,5
0,7-1,3
0,6-3,0
0,5-1,1
0,4-1,2
0,4-1,0
Capacity in m3/h
0,2-0,4
0,5-0,8
0,8-2,9
2,4-7,6
5,5-13,5
12-29
23-58
25-60
32-67
65-135
42-103
80-150
100-280
130-475
160-490
210-720
500-1500
Hydrozyklon_engl_09 25.03.2009 10:33 Uhr Seite 1
Probedruck
C M Y CM MY CY CMY K
03/2009
AKW Apparate + Verfahren GmbHDienhof 26D-92242 Hirschau/GermanyPhone +49 (0) 9622 7039-0Fax +49 (0) 9622 7039-376akwauv@akwauv.comwww.akwauv.com
OUR KNOW-HOW TO ADD VALUE TO YOUR PRODUCT