![4-Bromo-a-PVP - SWGDRUG · 2016. 4. 20. · EI4-Bromo-α-PVP HCl; Lot# Mass RM-160316-01 Spectrum: 40 60 80 100 120 140 160 180 200 220 240 260 280 300 m/z [x 10 6] Intensity 2 4](https://static.fdocument.org/doc/165x107/6112b50edc449d558f354d04/4-bromo-a-pvp-swgdrug-2016-4-20-ei4-bromo-pvp-hcl-lot-mass-rm-160316-01.jpg)
γλώσσες
Σελίδες
Νομικός
JSW Plastics Machinery Inc.
JSW Plastics Machinery (S) Pte Ltd
JSW Plastics Machinery (H.K.) Co., Ltd.
555 South Promenade Ave., Unit 104, Corona, California 92879, U.S.A.Phone: +1-951-898-0934 Fax: +1-951-898-0944540 Capital Drive, Suite 130, Lake Zurich, Illinois 60047,U.S.A.Phone: +1-847-550-0704 Fax: +1-847-550-072524301 Catherine Industrial Drive, Unit 118, Novi, Michigan 48375, U.S.A.Phone: +1-248-449-5422 Fax: +1-248-449-6018
17 Gul Lane 629413 SingaporePhone: +65-68614511 Fax: +65-68623166Unit 802 Alabang Business Tower, 1216 Acacia Avenue, Madrigal BusinessPark Alabang Muntinlupa city Metro Manila 1771, PhilippinesPhone: +63-2-478-2533 Fax: +63-2-478-2534Gedung Gajah Unit K, Jl. Dr. Saharjo No. 111 RT. 001/01, Kel. Tebet Barat,Kec. Tebet Jakarta 12810, IndonesiaPhone: +62-21-8370-2536 Fax: +62-21-829-8264
Room 907, Corporation Park, 11 On Lai Street, Shatin N.T., Hong KongPhone: +852-2648-0720 Fax: +852-2686-8204
JSW Plastics Machinery (M) SDN. BHD.D6-5-G,(Ground Floor), Block D6, Pusat Perdagangan Dana 1,Jalan Pju 1A/46, 47301, Petaling Jaya, Selangor Darul Ehsan, MalaysiaPhone: +60-3-78426076 Fax: +60-3-78426078
JSW Plastics Machinery (T) Co., Ltd.
Gate City Ohsaki-West Tower, 11-1, Osaki 1-chome, Shinagawa-ku,Tokyo 141-0032, JapanPhone: +81-3-5745-2081 Fax: +81-3-5745-2083～84URL http://www.jsw.co.jp/inj_f/inj_index.htm
DivisionHead Quarter:
URL http://www.jsw.co.jp/
Head Office:
Chicago Office:
Detroit Office:
Head Office:
Philippine Office:
Indonesia Office:
78/6 JST Building 4th Fl., Moo 7 King Kaew Road, Rachatewa,Bangplee, Samutprakarn 10540 ThailandPhone: +66-2-738-5272 Fax: +66-2-738-5277
JSW Plastics Machinery Vietnam Ltd.Room103, Techno-Center Thang Long Industrial Park Dong Anh District,Hanoi, Viet NamPhone: +84-4-3951-6383 Fax: +84-4-3951-6384
JSW Plastics Machinery (TAIWAN) Corp.1F., No.21, Da Hu 1st Road, Guieshan Shiang Taoyuan Country 33373 Taiwan, R.O.C.Phone: +886-3-396-2102 Fax: +886-3-396-210415F.,-7, No.689-78, Xiaodong Road, Yongkang City, Tainan Country 71052 Taiwan, R.O.C.Phone: +886-6-311-4192 Fax: +886-6-311-4193
JSW Machinery Trading (Shanghai) Co., Ltd.28A, Strength Plaza, No.600-4, Tianshan Road, Shanghai, 200051,People,s Republic of ChinaPhone: +86-21-5206-7031 Fax: +86-21-5206-7033
JSW Injection Machine Maintenance(Shenzhen) Co., Ltd.
1F, YiBen Electronic & Business Industrial Park, No.1063 Chaguang Road,Xili Town, Nanshan District, Shenzhen City,Guangdong Province, 518055,People's Repubulic of ChinaPhone: +86-755-8602-0930 Fax: +86-755-8602-0934
Head Office:
Tainan Office:
Printed in Japan HO, AC, AJ, AE, B
J550ADJ650ADJ850ADJ850ADW
J1000ADJ1300ADJ1800AD
Model
Specifications
Electric Servo DriveInjection Molding Machine
23080
280
280
Min.φ100
φ6
φ150＋0.040
0
φ150＋0.040
0
SR15
4
50
60
60
1400H 2300H/3100H
75
200
3509601380
100
50
75175250325425525
75175250 325 425 525
625
5075100
900
1320
350
200
2
110
130
420（1400H）493（2300H/3100H）
325（1400H）330（2300H/3100H）
595（1400H）540（2300H/3100H）
φ95（1400H）φ117（2300H/3100H）
200
200
Min.φ80
φ4
SR10
4
50
Please contact us in caseof less thanφ100.
2400
1500
8683（1400H）・9183（2300H/3100H）243 8440（1400H）・8940（2300H/3100H）
4704（1400H）・4943（2300H）・5118（3100H）4053
2380（1400H）・2670（2300H/3100H）
870（1400H）
830（2300H/3100H）
2231（1400H）・2364（2300H/3100H）
1684（1400H）
1704（2300H/3100H）
2168
8757（1400H）・8996（2300H）・9171（3100H）
2400
2370
1200 1170
1520
J550AD1400H 2300H 3100H
K（Option）
66
1026
934
241｛2450｝
216｛2200｝
547
237
B
84
1663
1513
149｛1510｝
134｛1360｝
887
418
A
76
300
1361
1238
182｛1850｝
163｛1660｝
160
726
338
210
40｛4.1｝
Barrel 4、Nozzle 1
34.7
30
8.76×2.37×2.40
B
100
3613
3288
156｛1590｝
140｛1420｝
1257
540
165
A
92
460
3058
2783
185｛1880｝
167｛1700｝
160
1064
490
180
65｛6.6｝
44.5
32
9.18×2.37×2.40
B
92
2792
2541
158｛1610｝
142｛1440｝
1064
470
180
A
84
420
2328
2118
190｛1930｝
171｛1740｝
160
887
420
200
65｛6.6｝
Barrel 5、Nozzle 1
39.2
32
9.18×2.37×2.40
mm
mm
cm3
g
MPa｛kgf/cm2｝
MPa｛kgf/cm2｝
mm/s
cm3/s
kg/h
min-1
kN｛tf｝
mm
kW
kN｛tf｝
mm
mm
mm
m/min
mm
mm
kN｛tf｝
mm
t
m
550550
50
Open nozzle
Double toggle
5400｛550｝
1700
900
400～800
70
960×900
1380×1320
21 points
130｛13.3｝
180
2459（1400H）・2739（2300H）・2914（3100H）
To stationary platen top
To hopper mount level
6-Ｍ24 depth 51Take-out robot mount tap
Upper surface of stationary platenHopper mount
4-M12 depth 21
Movable platen side
Ｍ24 depth 39
Ｍ16 depth 27
Nozzle strokeMax. forwardposition 50
Screw barrel type
Screw diameter
Screw stroke
Theoretical injection capacity
Injection capacity（GP-PS）
Injection pressure（Max.）
Holding pressure（Max.）
Injection speed
Injection rate
Plasticizing rate（GP-PS）
Screw speed
Nozzle touch force
Nozzle stroke from platen
Type of nozzle
Barrel temperature control
Heater wattage
Mechanism
Clamping force
Daylight opening（Max.）
Opening stroke（Max.）
Mold height
Platen speed
Distance between tie-bars（H×V）
Platen size（H×V）
Ejector point
Ejector force
Ejector stroke
Machine weight
Machine dimensions（L×W×H）
Remarks:1.Maximum injection pressure and maximum holding pressure may be restricted due to molding condition.2.The theoretical injection capacity is（ cross sectional area of barrel）×（ st roke of screw）.3.The injection capacity is applicable for GP-PS and variable according to the grade of resin, molding conditions and mold.4.The plasticizing rate is applicable for GP-PS.5.PC, HPVC, other engineering plastic, etc., low temperature setting and high speed molding may require a high torque depending on the grade or molding conditions. Please contact us if you plan.Note:1.Due to continual improvements, specifications are subject to change without notice.2.Actual figures of the specification will vary depending on final machine configuration. Please contact us if you require more specific data.3.Performance specifications are based on theoretical data.4.1MPa=10.2 kgf/cm2,1kN=0.102tf
13-φ40Through holefor ejector rod
104-M20 depth 43Mold mounting hole
8-φ60Through holefor ejector rod
Ejector stroke 180
Ejector rod φ50
Ejector rod φ32
Min. mold height 400Max. mold height 800
Max. stroke 900
Performance Table Equipment Dimensions and Mold Related Dimensions
Injection Unit
Clamping Unit
General
Item
Model
Unit
Electric Servo DriveInjection Molding Machine
2449
1240 1209
1510
2425
1500
9768（2300H/3100H）・10752（3900H）9525（2300H/3100H）・10509（3900H）
830
4973（2300H）・5148（3100H）・5692（3900H）4608
2670（2300H/3100H）・2948（3900H）
2364（2300H/3100H）・2427（3900H）
1704（2300H/3100H）
1714（3900H）
2208
2769（2300H）・2944（3100H）・3109（3900H）
9581（2300H）・9756（3100H）・10300（3900H）
2400
23080
280
280
φ150
Min.φ100
φ6
＋0.040
0
SR15
4
50
Ｍ２４ depth 39
Ｍ１６ depth 27
2
2300H/3100H
140-M24 depth 51Mold mounting hole
13-φ40Through holefor ejector rod
50
50 175
75
250325 425 525 625
75
200
100
350
1060500
1500
75100
125
200
960
1400 350
625525425325250
75175
12-φ60Through holefor ejector rod
3900H
243
５７０
110
130330
493
200
200
φ117
Please contact us in case of less thanφ100.
J650AD2300H 3100H 3900H
B
92
2792
2541
158｛1610｝
142｛1440｝
1064
470
180
A
84
420
2328
2118
190｛1930｝
171｛1740｝
160
887
420
200
39.2
37
9.77×2.45×2.43
B
110
4752
4324
153｛1560｝
138｛1400｝
1521
620
150
A
100
500
3927
3574
185｛1880｝
167｛1700｝
160
1257
550
165
46.3
39
10.75×2.45×2.43
B
100
3613
3288
156｛1590｝
140｛1420｝
1257
540
165
A
92
460
3058
2783
185｛1880｝
167｛1700｝
160
1064
490
180
65｛6.6｝
44.5
37
9.77×2.45×2.43
mm
mm
cm3
g
MPa｛kgf/cm2｝
MPa｛kgf/cm2｝
mm/s
cm3/s
kg/h
min-1
kN｛tf｝
mm
kW
kN｛tf｝
mm
mm
mm
m/min
mm
mm
kN｛tf｝
mm
t
m
650650
50
Open nozzle
Barrel 5、Nozzle 1
Double toggle
6380｛650｝
2000
1000
450～1000
70
1060×960
1500×1400
25 points
190｛19.4｝
200
Screw barrel type
Screw diameter
Screw stroke
Theoretical injection capacity
Injection capacity（GP-PS）
Injection pressure（Max.）
Holding pressure（Max.）
Injection speed
Injection rate
Plasticizing rate（GP-PS）
Screw speed
Nozzle touch force
Nozzle stroke from platen
Type of nozzle
Barrel temperature control
Heater wattage
Mechanism
Clamping force
Daylight opening（Max.）
Opening stroke（Max.）
Mold height
Platen speed
Distance between tie-bars（H×V）
Platen size（H×V）
Ejector point
Ejector force
Ejector stroke
Machine weight
Machine dimensions（L×W×H）
Remarks:1.Maximum injection pressure and maximum holding pressure may be restricted due to molding condition.2.The theoretical injection capacity is（ cross sectional area of barrel）×（ st roke of screw）.3.The injection capacity is applicable for GP-PS and variable according to the grade of resin, molding conditions and mold.4.The plasticizing rate is applicable for GP-PS.5.PC, HPVC, other engineering plastic, etc., low temperature setting and high speed molding may require a high torque depending on the grade or molding conditions. Please contact us if you plan.Note:1.Due to continual improvements, specifications are subject to change without notice.2.Actual figures of the specification will vary depending on final machine configuration. Please contact us if you require more specific data.3.Performance specifications are based on theoretical data.4.1MPa=10.2 kgf/cm2,1kN=0.102tf
Injection Unit
Clamping Unit
General
Item
Model
Unit
To stationary platen top
To hopper mount level
4-M12 depth 21 4-M16 depth 27
６-Ｍ２４ depth 51
Min. mold height 450Max. mold height 1000
Max. stroke 1000
Movable platen side
Nozzle strokeMax. forwardposition 50
Upper surface of stationary platenHopper mount
Performance Table Equipment Dimensions and Mold Related Dimensions
Take-out robot mount tap
Ejector stroke 200
Ejector rod φ50
Ejector rod φ32
482
212
280
253
φ120
260
108
60
Electric Servo DriveInjection Molding Machine
295130
φ150
φ6
＋0.040
0
SR15
4
2569
1315 1254
1600
2580
1500
10493（3100H）・11477（3900H/5200H）10250（3100H）・11234（3900H/5200H）
5168（3100H）・5712（3900H）・5952（5200H）5313
2670（3100H）・2948（3900H/5200H）
830
2364（3100H）・2427（3900H/5200H）
1704（3100H）
1714（3900H/5200H）
2303
2964（3100H）・3129（3900H）・3369（5200H）
10481（3100H）・11025（3900H）・11265（5200H）
2400
16-φ60Through holefor ejector rod
13-φ40Through holefor ejector rod
144-M24 depth 51Mold mounting hole
5075100125200
350500
10601590
725625525
425
325
250
175
1590
1060
350
500
200
100
125
75 50
175
250 325425 525625725
Ｍ１６ depth 27
2
3100H 3900H/5200H 23080
280
280
６-Ｍ２４ depth 51
５９０
243
Min.φ100
Please contact us in case of less thanφ100.
J850AD3100H 3900H 5200H
B
100
3613
3288
156｛1590｝
140｛1420｝
1257
540
165
A
92
460
3058
2783
185｛1880｝
167｛1700｝
160
1064
490
180
44.5
48
10.49×2.57×2.58
B
120
6220
5660
147｛1490｝
132｛1340｝
1753
700
140
A
110
550
5227
4757
175｛1780｝
158｛1610｝
155
1473
630
150
53.7
50
11.48×2.57×2.58
B
110
4752
4324
153｛1560｝
138｛1400｝
1521
620
150
A
100
500
3927
3574
185｛1880｝
167｛1700｝
160
1257
550
165
65｛6.6｝
46.3
50
11.48×2.57×2.58
mm
mm
cm3
g
MPa｛kgf/cm2｝
MPa｛kgf/cm2｝
mm/s
cm3/s
kg/h
min-1
kN｛tf｝
mm
kW
kN｛tf｝
mm
mm
mm
m/min
mm
mm
kN｛tf｝
mm
t
m
850850
50
Open nozzle
Barrel 5、Nozzle 1
Double toggle
8340｛850｝
2300
1200
500～1100
70
1060×1060
1590×1590
29 points
230｛23.5｝
200
Screw barrel type
Screw diameter
Screw stroke
Theoretical injection capacity
Injection capacity（GP-PS）
Injection pressure（Max.）
Holding pressure（Max.）
Injection speed
Injection rate
Plasticizing rate（GP-PS）
Screw speed
Nozzle touch force
Nozzle stroke from platen
Type of nozzle
Barrel temperature control
Heater wattage
Mechanism
Clamping force
Daylight opening（Max.）
Opening stroke（Max.）
Mold height
Platen speed
Distance between tie-bars（H×V）
Platen size（H×V）
Ejector point
Ejector force
Ejector stroke
Machine weight
Machine dimensions（L×W×H）
Remarks:1.Maximum injection pressure and maximum holding pressure may be restricted due to molding condition.2.The theoretical injection capacity is（ cross sectional area of barrel）×（ st roke of screw）.3.The injection capacity is applicable for GP-PS and variable according to the grade of resin, molding conditions and mold.4.The plasticizing rate is applicable for GP-PS.5.PC, HPVC, other engineering plastic, etc., low temperature setting and high speed molding may require a high torque depending on the grade or molding conditions. Please contact us if you plan.Note:1.Due to continual improvements, specifications are subject to change without notice.2.Actual figures of the specification will vary depending on final machine configuration. Please contact us if you require more specific data.3.Performance specifications are based on theoretical data.4.1MPa=10.2 kgf/cm2,1kN=0.102tf
Injection Unit
Clamping Unit
General
Item
Model
Unit
Performance Table
To stationary platen top
To hopper mount level
4-M16 depth 274-M12 depth 21
Ｍ２４ depth 39
Upper surface of stationary platenHopper mount
Ejector stroke 200
Ejector rod φ50
Ejector rod φ32Nozzle stroke
Max. forwardposition 50
Min. mold height 500Max. mold height 1100
Max. stroke 1200
Movable platen side
Equipment Dimensions and Mold Related Dimensions
Take-out robot mount tap
Electric Servo DriveInjection Molding Machine
110
130330
493
200
200
φ117
482
212
280
253
φ120
260
108
505060
295130
φ150
φ6
＋0.040
0
SR15
4
2879
1470 1409
1900
2740
1600
10503（3100H）・11487（3900H/5200H）10260（3100H）・11244（3900H/5200H）
5228（3100H）・5772（3900H）・6012（5200H）5263
2770（3100H）・3048（3900H/5200H）
930
2464（3100H）・2527（3900/H5200H）
1804（3100H）
1814（3900H/5200H）
2535
3024（3100H）・3189（3900H）・3429（5200H）
10491（3100H）・11035（3900H）・11275（5200H）
2450
Ｍ２４ depth 39
Ｍ１６ depth 27
2
3100H 3900H/5200H 30080
375
375
６-Ｍ２４ depth 51
650
243
5075100125200
350500
1320
1900
1800
1320
350
500
200
100
125
75 50
175
250
325
425 525625 725825
725
825
625
525
425325
250
Min.φ100
Please contact us in case of less thanφ100.
J850ADW3100H 3900H 5200H
B
100
3613
3288
156｛1590｝
140｛1420｝
1257
540
165
A
92
460
3058
2783
185｛1880｝
167｛1700｝
160
1064
490
180
44.5
52
10.50×2.88×2.74
B
120
6220
5660
147｛1490｝
132｛1340｝
1753
700
140
A
110
550
5227
4757
175｛1780｝
158｛1610｝
155
1473
630
150
53.7
56
11.49×2.88×2.74
B
110
4752
4324
153｛1560｝
138｛1400｝
1521
620
150
A
100
500
3927
3574
185｛1880｝
167｛1700｝
160
1257
550
165
65｛6.6｝
46.3
56
11.49×2.88×2.74
mm
mm
cm3
g
MPa｛kgf/cm2｝
MPa｛kgf/cm2｝
mm/s
cm3/s
kg/h
min-1
kN｛tf｝
mm
kW
kN｛tf｝
mm
mm
mm
m/min
mm
mm
kN｛tf｝
mm
t
m
850 W850 W
50
Open nozzle
Barrel 5、Nozzle 1
Double toggle
8340｛850｝
2300
1200
500～1100
70
1320×1320
1900×1800
29 points
230｛23.5｝
200
Screw barrel type
Screw diameter
Screw stroke
Theoretical injection capacity
Injection capacity（GP-PS）
Injection pressure（Max.）
Holding pressure（Max.）
Injection speed
Injection rate
Plasticizing rate（GP-PS）
Screw speed
Nozzle touch force
Nozzle stroke from platen
Type of nozzle
Barrel temperature control
Heater wattage
Mechanism
Clamping force
Daylight opening（Max.）
Opening stroke（Max.）
Mold height
Platen speed
Distance between tie-bars（H×V）
Platen size（H×V）
Ejector point
Ejector force
Ejector stroke
Machine weight
Machine dimensions（L×W×H）
Remarks:1.Maximum injection pressure and maximum holding pressure may be restricted due to molding condition.2.The theoretical injection capacity is（ cross sectional area of barrel）×（ st roke of screw）.3.The injection capacity is applicable for GP-PS and variable according to the grade of resin, molding conditions and mold.4.The plasticizing rate is applicable for GP-PS.5.PC, HPVC, other engineering plastic, etc., low temperature setting and high speed molding may require a high torque depending on the grade or molding conditions. Please contact us if you plan.Note:1.Due to continual improvements, specifications are subject to change without notice.2.Actual figures of the specification will vary depending on final machine configuration. Please contact us if you require more specific data.3.Performance specifications are based on theoretical data.4.1MPa=10.2 kgf/cm2,1kN=0.102tf
Injection Unit
Clamping Unit
General
Item
Model
Unit
Performance Table Equipment Dimensions and Mold Related Dimensions
To stationary platen top
To hopper mount level
4-M12 depth 21 4-M16 depth 27
184-M24 depth 51Mold mounting hole
Take-out robot mount tap
Upper surface of stationary platenHopper mount
Ejector stroke 200
Ejector rod φ50
Ejector rod φ32Nozzle stroke
Max. forwardposition 50
Min. mold height 500Max. mold height 1100
Max. stroke 1200
16-φ60Through holefor ejector rod
13-φ40Through holefor ejector rod
Movable platen side
110
130330
493
200
200
φ117
482
212
280
253
φ120
260
108
505060
Electric Servo DriveInjection Molding Machine
295130
175
2
1900
φ150
φ6
＋0.040
0
SR15
4
3100H 3900H/5200H 30080
375
375
６-Ｍ２４ depth 51 Take-out robot mount tap
Electric Servo DriveInjection Molding Machine
Min.φ100
Please contact us in case of less thanφ100.
29695714
To tie-bar top
5228（3100H）・5772（3900H）・6012（5200H）
2464（3100H）
2527（3900H/5200H）
2770（3100H）
3048（3900H/5200H）
1600
930
3024（3100H）・3189（3900H）・3429（5200H）
10942（3100H）・11486（3900H）・11726（5200H）
10710（3100H）・11694（3900H/5200H）
10954（3100H）・11938（3900H/5200H）
244
1470 1499
2775
2460
1804（3100H）
1814（3900H/5200H）
To hopper mount level
J1000AD3100H 3900H 5200H
B
100
3613
3288
156｛1590｝
140｛1420｝
1257
540
165
A
92
460
3058
2783
185｛1880｝
167｛1700｝
160
1064
490
180
44.5
61
10.95×2.97×2.78
B
120
6220
5660
147｛1490｝
132｛1340｝
1753
700
140
A
110
550
5227
4757
175｛1780｝
158｛1610｝
155
1473
630
150
53.7
64
11.94×2.97×2.78
B
110
4752
4324
153｛1560｝
138｛1400｝
1521
620
150
A
100
500
3927
3574
185｛1880｝
167｛1700｝
160
1257
550
165
65｛6.6｝
46.3
64
11.94×2.97×2.78
Performance Table Equipment Dimensions and Mold Related Dimensions
10001000
50
Open nozzle
Barrel 5、Nozzle 1
Double toggle
9810｛1000｝
2500
1300
500～1200
70
1320×1320
1900×1800
29 points
230｛23.5｝
200
Remarks:1.Maximum injection pressure and maximum holding pressure may be restricted due to molding condition.2.The theoretical injection capacity is（ cross sectional area of barrel）×（ st roke of screw）.3.The injection capacity is applicable for GP-PS and variable according to the grade of resin, molding conditions and mold.4.The plasticizing rate is applicable for GP-PS.5.PC, HPVC, other engineering plastic, etc., low temperature setting and high speed molding may require a high torque depending on the grade or molding conditions. Please contact us if you plan.Note:1.Due to continual improvements, specifications are subject to change without notice.2.Actual figures of the specification will vary depending on final machine configuration. Please contact us if you require more specific data.3.Performance specifications are based on theoretical data.4.1MPa=10.2 kgf/cm2,1kN=0.102tf
Ejector stroke 200
Max. stroke 1300 Min. mold height 500Max. mold height 1200
Nozzle strokeMax. forwardposition 50
Ejector rod φ50
Ejector rod φ32
Ｍ２４ depth 39
Ｍ16 depth 27
650
16-φ60Through holefor ejector rod
13-φ40Through holefor ejector rod
184-M24 depth 51Mold mounting hole
825725625525425325250
175
175250325425 525625725825
5075100125200350500
13201900
1800
1320
500
350
200
125
100 75 50
2560
To stationary platen top
Upper surface of stationary platenHopper mount
Movable platen side
110
130330
493
200
200
φ117
4-M12 depth 21 4-M16 depth 27
482295
212
280
253
φ120
260
108
130
505060
mm
mm
cm3
g
MPa｛kgf/cm2｝
MPa｛kgf/cm2｝
mm/s
cm3/s
kg/h
min-1
kN｛tf｝
mm
kW
kN｛tf｝
mm
mm
mm
m/min
mm
mm
kN｛tf｝
mm
t
m
Screw barrel type
Screw diameter
Screw stroke
Theoretical injection capacity
Injection capacity（GP-PS）
Injection pressure（Max.）
Holding pressure（Max.）
Injection speed
Injection rate
Plasticizing rate（GP-PS）
Screw speed
Nozzle touch force
Nozzle stroke from platen
Type of nozzle
Barrel temperature control
Heater wattage
Mechanism
Clamping force
Daylight opening（Max.）
Opening stroke（Max.）
Mold height
Platen speed
Distance between tie-bars（H×V）
Platen size（H×V）
Ejector point
Ejector force
Ejector stroke
Machine weight
Machine dimensions（L×W×H）
Injection Unit
Clamping Unit
General
Item
Model
Unit
2
φ150 φ6
＋0.040
0
SR15
4
3900H/5200H 7500H 3900H/5200H 7500H30080
375375
６-Ｍ２４ depth 51
Min.φ100
φ150＋0.040
0
Min.φ100
SR15
φ6
4
925825725625525425325250
175
175250325425 525625725825925
5075100125200350500
14002000
2000
1400
500
350
200
125
100 75 50
16-φ60Through holefor ejector rod
13-φ40Through holefor ejector rod
228-M24 depth 51Mold mounting hole
Take-out robot mount tap
Please contact us in case of less thanφ100. Please contact us in case of less thanφ100.
Electric Servo DriveInjection Molding Machine
J1300AD3900H 5200H 7500H
B
110
4752
4324
153｛1560｝
138｛1400｝
1521
620
150
A
100
500
3927
3574
185｛1880｝
167｛1700｝
160
1257
550
165
46.3
84
12.80×3.05×3.02
B
130
8760
7972
153｛1560｝
135｛1370｝
1726
730
130
A
120
660
7464
6793
180｛1830｝
158｛1610｝
130
1470
700
140
Barrel 5、Nozzle 2
72.8
87
13.33×3.05×3.02
B
120
6220
5660
147｛1490｝
132｛1340｝
1753
700
140
A
110
550
5227
4757
175｛1780｝
158｛1610｝
155
1473
630
150
65｛6.6｝
53.7
84
12.80×3.05×3.02
Performance Table Equipment Dimensions and Mold Related Dimensions
13001300
50
Open nozzle
Barrel 5、Nozzle 1
Double toggle
12800｛1300｝
2800
1500
650～1300
65
1400×1400
2000×2000
29points
300｛30.5｝
250
Ejector stroke 250
Max. stroke 1500 Min. mold height 650Max. mold height 1300
Nozzle stroke 790
Max. forwardposition 50
Ejector rod φ50
Ejector rod φ32
Ｍ２４ depth 39
Ｍ16 depth 27
1960
3050
6434
1700
244
1510 1540
3015
2630
12346（3900H）・12586（5200H）・13059（7500H）
5912（3900H）・6152（5200H）・6625（7500H）
3329（3900H）・3569（5200H）・3852（7500H）
2770
3148（3900H/5200H）・3193（7500H）
2627（3900/H5200H）・2697（7500H）
1030（3900H/5200H）
960（7500H）
12554（3900H/5200H）・13084（7500H）
12798（3900H/5200H）・13328（7500H）
To tie-bar top
To stationary platen top
Hopper mount Upper surface of stationary platen
Movable platen side
1914（3900H/5200H）
1959（7500H）
To hopper mount level
4-M16 depth 27
482295
212
280
253
φ120
260
108
130130
550295
4-M16 depth 27
350253
108
212
260
505060 50
120
φ150
Remarks:1.Maximum injection pressure and maximum holding pressure may be restricted due to molding condition.2.The theoretical injection capacity is（ cross sectional area of barrel）×（ st roke of screw）.3.The injection capacity is applicable for GP-PS and variable according to the grade of resin, molding conditions and mold.4.The plasticizing rate is applicable for GP-PS.5.PC, HPVC, other engineering plastic, etc., low temperature setting and high speed molding may require a high torque depending on the grade or molding conditions. Please contact us if you plan.Note:1.Due to continual improvements, specifications are subject to change without notice.2.Actual figures of the specification will vary depending on final machine configuration. Please contact us if you require more specific data.3.Performance specifications are based on theoretical data.4.1MPa=10.2 kgf/cm2,1kN=0.102tf
mm
mm
cm3
g
MPa｛kgf/cm2｝
MPa｛kgf/cm2｝
mm/s
cm3/s
kg/h
min-1
kN｛tf｝
mm
kW
kN｛tf｝
mm
mm
mm
m/min
mm
mm
kN｛tf｝
mm
t
m
Screw barrel type
Screw diameter
Screw stroke
Theoretical injection capacity
Injection capacity（GP-PS）
Injection pressure（Max.）
Holding pressure（Max.）
Injection speed
Injection rate
Plasticizing rate（GP-PS）
Screw speed
Nozzle touch force
Nozzle stroke from platen
Type of nozzle
Barrel temperature control
Heater wattage
Mechanism
Clamping force
Daylight opening（Max.）
Opening stroke（Max.）
Mold height
Platen speed
Distance between tie-bars（H×V）
Platen size（H×V）
Ejector point
Ejector force
Ejector stroke
Machine weight
Machine dimensions（L×W×H）
Injection Unit
Clamping Unit
Item
Model
Unit
3
φ150 φ6
＋0.040
0
SR15
4
5200H
9500H
7500H
5200H 7500H/9500H
Min.φ100
φ150＋0.040
0
Min.φ100（7500H）
Min.φ115（9500H）
SR15
φ6
4
Electric Servo DriveInjection Molding Machine
Please contact us in case of less thanφ100. Please contact us in case of less thanφ100.
J1800AD5200H 7500H 9500H
B
120
6220
5660
147｛1490｝
132｛1340｝
1753
700
140
A
110
550
5227
4757
175｛1780｝
158｛1610｝
155
1473
630
150
65｛6.6｝
Barrel 5、Nozzle 1
53.7
119
13.75×3.70×3.42
B
140
11007
10016
155｛1580｝
140｛1420｝
2001
880
130
75｛7.6｝
A
130
715
9490
8636
180｛1830｝
162｛1650｝
130
1726
850
135
Barrel 5、Nozzle 2
90.4
131
14.47×4.21×3.42
B
130
8760
7972
153｛1560｝
135｛1370｝
1726
730
130
A
120
660
7464
6793
180｛1830｝
158｛1610｝
130
1470
700
140
65｛6.6｝
72.8
122
14.23×3.70×3.42
Performance Table Equipment Dimensions and Mold Related Dimensions
18001800
50
Open nozzle
Double toggle
17700｛1800｝
3200
1700
800～1500
60
1850×1620
2550×2320
37points
380｛38.7｝
300 Ejector stroke 300
Max. stroke 1700 Min. mold height 800Max. mold height 1500
Nozzle stroke930（5200H/7500H）1000（9500H）
Max. forwardposition 50
Ejector rod φ50
Ejector rod φ32
Ｍ２４ depth 39
Ｍ16 depth 27
37-φ60Through holefor ejector rod
312-M24 depth 51Mold mounting hole50
75100125
200350500
18502550
650
82592510251125
725625525425325
250175
150
2320
1620
500
350
200
125
150
100 75 50 175
250325425525
625725 8259251025
2560
3700 7199
1950
329
1835 1865
3415
3030
13491（5200H）・13964（7500H）・14467（9500H）
6292（5200H）・6765（7500H）・7268（9500H）
3709（5200H）・3992（7500H）・4339（9500H）
3145
2877（5200H）・2947（7500H/9500H）
3398（5200H）
3443（7500H）・3478（9500H）
1280（5200H）
1210（7500H）
960（9500H）
13424（5200H）・13904（7500H）・14130（9500H）
13753（5200H）・14233（7500H）・14459（9500H）
10-Ｍ２４ depth 51Take-out robotmount tap
200200
230
450
200
200
450
650
2164（5200H）
2209（7500H）
2244（9500H）
Remarks:1.Maximum injection pressure and maximum holding pressure may be restricted due to molding condition.2.The theoretical injection capacity is（ cross sectional area of barrel）×（ st roke of screw）.3.The injection capacity is applicable for GP-PS and variable according to the grade of resin, molding conditions and mold.4.The plasticizing rate is applicable for GP-PS.5.PC, HPVC, other engineering plastic, etc., low temperature setting and high speed molding may require a high torque depending on the grade or molding conditions. Please contact us if you plan.Note:1.Due to continual improvements, specifications are subject to change without notice.2.Actual figures of the specification will vary depending on final machine configuration. Please contact us if you require more specific data.3.Performance specifications are based on theoretical data.4.1MPa=10.2 kgf/cm2,1kN=0.102tf
mm
mm
cm3
g
MPa｛kgf/cm2｝
MPa｛kgf/cm2｝
mm/s
cm3/s
kg/h
min-1
kN｛tf｝
mm
kW
kN｛tf｝
mm
mm
mm
m/min
mm
mm
kN｛tf｝
mm
t
m
Screw barrel type
Screw diameter
Screw stroke
Theoretical injection capacity
Injection capacity（GP-PS）
Injection pressure（Max.）
Holding pressure（Max.）
Injection speed
Injection rate
Plasticizing rate（GP-PS）
Screw speed
Nozzle touch force
Nozzle stroke from platen
Type of nozzle
Barrel temperature control
Heater wattage
Mechanism
Clamping force
Daylight opening（Max.）
Opening stroke（Max.）
Mold height
Platen speed
Distance between tie-bars（H×V）
Platen size（H×V）
Ejector point
Ejector force
Ejector stroke
Machine weight
Machine dimensions（L×W×H）
Injection Unit
Clamping Unit
Item
Model
Unit
To tie-bar top
To stationary platen top
To hopper mount level
Hopper mount Upper surface of stationary platen
Movable platen side
4-M16 depth 27482
130
212
280253
φ120
260
108
130295
550295
4-M16 depth 27
4-M16 depth 27
371253
350253108
212
260
212
260
505060 50
120（7500H）150（9500H）
φ150
φ170
108
581310145
Open nozzleN2000F barrelChrome plated screwPurge cover（with limit switch）Injection unit swiveling device（with limit switch）Screw cold start preventionMolding/Pause temperature selectAuto purging circuitNozzle retract selectPull-back selectAuto grease lubricationInjection/Meteringprogrammed control
Holding pressure transfer select
Holding pressurecontrol select
Barrel temperature control（PID）Nozzle temperature control（PID/SSR）Synchronous temperature rise controlHopper flange temperature controlSoft pack servo controlHAVC （High Accuracy Volume Control）IWCS （Injection Weight and Cushion Stability） controlReverse seal controlGrease-free toggle bushingAuto grease lubricationHigh-performance platen supportFlat press platen mechanism（Stationary side/Movable side）
Mold open/close andEjector programmed control
Mold protectionEjector braking systemElectric-driven mold thickness adjusting deviceAuto clamp force settingClamp force displayClamp force feed back control
Toggle type injectioncompression function
Clamping safety device （Electrical/Mechanical）Robot mounting holes
Compound action
Safety mat
Clamping Unit
Injection and Plasticizing Unit
Item Item
Controller
Monitor
Others
Touch panel 15” TFT color LCD controller120 Mold condition storage（Internal memory）Soft start moldingSelf diagnostics functionHelp functionPop-up displayClockMulti-language select（English, Chinese, Japanese）Print screen by USB memoryUSB printer portOverall setting screenPre-heat timerProduct takeout robot circuitAttended/Unattended operation selectEmergency stop buttonSafety keyActual value displayMold temperature displayInjection/Metering waveform monitorOscilloscope waveform monitorInjection/Metering waveform storageBarrel temperature monitorInjection pressure monitorStatistical graphProduction monitorCumulative operating hour displayCycle monitorMolding condition upper/lower limit monitorInspection and Maintenance guideHeater system fault alarmInjection pressure overshoot alarmGrease lubrication fault alarmServo fault alarmUnreleased clamp alarmPosition calibration requestAlarm buzzerAlarm historySet value historySafety compliance to JIMS K1001Cooling water closed circuit for feed throatMold cooling water circuit （Machine bed）Accessories （Maintenance tools, Ejector rods, etc.）
Note6
Note7
Note8
Note9
Note10
Standard Equipment List Options List
Item ItemLong nozzleShut-off nozzles（Pneumatic type and Hydraulic type）LSP-2 screw （Abrasion-resistant type）
Wide selection of screws & barrels
Barrel Insulation coverBarrel blower cooling unitHopper（Option for all the region）High holding pressure molding（for long-time holding pressure molding）Electric motor driven IU advance/retractVented barrelDaylight extensionT-slot platenLocating ringAir jetCore pull device（Pneumatic type and Hydraulic type）Valve gate device（Pneumatic type and Hydraulic type）Auto safety gate openAuto safety gate open/closeSafety matSafety footplateMold clamperMold setup deviceMagnet mold ClamperCooling water manifold on platenHydraulic power packEjector braking system
Others
Electrical Instrumentation and Control
Clamping Unit
Injection Unit
Multi-language select（French, Spanish or Hangul）Simple centralized monitor system Link10Centralized control system NET100Heater burnout alarmMold temperature display（with mold temperature upper/lower limit alarm）Mold temperature control（with mold temperature upper/lower limit alarm）Printer（with printer cable）Password FunctionHot runner control circuitUnscrewing motor circuitEjector gate cutting circuitEjector plate return confirmation circuitInjection speed:10 Steps controlInjection speed slope controlFoaming molding controlSkin adhesion molding controlD.I.C.（Dual Integrated Control） with Yushin RobotHopper stageCooling water failure warningLeveling pad for installationRotary warning lightExport specificationDesignated color
●For details of each option, confirm in the specifications for the options.
Electric Servo DriveInjection Molding Machine
Note 6.
Note 7.Note 8.Note 9.
Note 10.
The external memory is capable of storing conditions for 1,000 molds.Prepare commercial USB data storage media.The printer and printer cables are options.Temperature sensors and electric wiring are not included.Maximum of 16 items and alarms can be selected out of the following monitor items.①Cycle time ②Injection time ③Metering time ④Cushion position ⑤Holding pressure end position ⑥Injection pressure ⑦Holding pressure transfer pressure ⑧Screw back pressure ⑨Metering end position ⑩Injection start position ⑪Holding pressure transfer position ⑫Mold open time ⑬Mold close time ⑭Metering torque ⑮Holding pressure transfer speed ⑯Mold inner pressure (option)⑰Clamp force ⑱Shift amount (HAVC) ⑲End speed (HAVC)Indicates inspection times and items.
Note 7.
Note 8.
Note 9.
Note 10.Note 11.
Note 12.
Regarding the other languages, contact us separately.English and Chinese are equipped as standard.The LINK10 has actual data collection, molding condition control and remote control functions.The NET100 has quality control and production control function in addition to the functions that the LINK10 has.May not be applicable depending on the model.Regarding the export specifications, separate discussion is needed in some cases, depending upon the export destination.Designate colors, referring to color samples or Munsell codes.
Injection/Holding pressure :1～6 Steps（Variable）Metering/Back pressure :1～3 Steps（Variable）
Step modeSlope mode
Mold open/close : 4 Steps（Fixed）Ejector : 1～3 Steps（Variable）1～3 Steps（Variable）
A -modeB -modeCompression : 1～6 Steps（Variable）
Screw rotation during mold open/closeEject during mold openInjection during clamp upOperator side step safety matUnder mold area safety mat
Note1
Note2
Note3
Note4
Note5
Screw & Barrel for high plasticizationScrew & Barrel for optical applicationHigh dispersion screwHigh viscosity resin screwLong-fiber resin screwSpecial screw Note1
Note2
Note3
Note3
Note4
Note5
Note6
Note7
Note8
Note9
Note10
Note11
Note12
Note 1.
Note 2.Note 3.
Note 4.Note 5.
GP21 screw for Injection unit 1400H.High-Melter MIII screw for Injection unit 2300H and higher.Manual operation type for Injection unit 1400H.Injection unit 1400H is controlled by SSR (non-contact).Injection unit 2300H and higher are controlled by MC (contact).Equipped as standard for J650AD and higher, optional for J550AD.Safety mat on the top of the step is equipped as standard for J650AD and higher, optional for J550AD.Safety mat on the top of the inter-platens bed is equipped as standard for J850ADW and higher (models with 1200mm or wider gap between tie-bars), optional for J850AD.
Note 1.Note 2.
Note 3Note 4.
Note 5.
Note 6.
Regarding special screws, contact us separately.Enables a long holding time and high holding pressure molding.The injection speed may become lower.For the hydraulic type, a separate hydraulic unit is needed.Safety mat on the top of the step is equipped as standard for J650AD and higher.Safety mat on the top of the inter-platens bed is equipped as standard for J850ADW and higher (models with 1200mm or wider gap between tie-bars).When applied, extended nozzle is required.Note that the usable mold thickness range will change.Equipped as standard for J650AD and higher.
Utilities
■ Total Power Capacity
Note: 1. Total power capacity does not include external outlets. 2. We recommend that the rated interrupting current of the main power supply breaker is more than 25 kA at AC400V/460V.
J550AD
J650AD
J850ADJ850ADW
J1000AD
J1300AD
J1800AD
Machine Model
1400H
2300H
3100H
2300H
3100H
3900H
3100H
3900H
5200H
3100H
3900H
5200H
3900H
5200H
7500H
5200H
7500H
9500H
■ Cooling Water Capacity for Barrel Temperature Control
Injection Unit
1400H
2300H
3100H
3900H
5200H
7500H
9500H
0.6
1.2
1.6
2.8
Cooling Water Capacity for Barrel Temperature control（m3/h）
■Hydraulic Oil Tank Capacity
機 種
J550AD
J650AD
J850AD
J850ADW
J1000AD
J1300AD
J1800AD
30
Hydraulic Oil Tank Capacity（L）
Note:The above figures do not include the required quantity of water for the mold temperature controller.
Total Power Capacity（kVA）
53.5
58.3
68.6
59.9
70.2
84.9
70.4
85.1
88.1
71.2
85.9
88.9
86.3
89.2
96.7
90.6
98.1
150.9
Electric Servo DriveInjection Molding Machine
Top Related