FRM Flat Rolling Mill

A complete range of FLAT ROLLING MILLS for cast Bar, Block and Strip for Precious Metal and Special Metal Alloys

FRMA Complete Range of FLAT ROLLING MILLS for cast Bar, Block and Stripfor Precious Metal and Special Metal Alloys

Configuration FRM 3 FRM 42 Hi (Ø x Width)4 Hi (ØBUR/ØWR x Width)Thickness tolerance μm

mm mm

FRM 1 FRM 2 FRM 5Ø200 x 160 Ø160/60 x160

± 1

Ø200 x 200 Ø200/60 x 200

± 1

Ø280 x 250Ø230/80 x 250

± 2

Ø320 x 300 Ø265/120 x 300

± 3

Ø410 x 450Ø400/160 x 450

± 5

Features

Lower Operation Costs FRM Options

BÜHLER REDEX GmbH | Hanauerstr. 3-5 | 75181 | Pforzheim | Germany

www.buehler-redex.com

E. info@buehler-redex.com

T. +49 7231 7755-0 F. +49 7231 7755-54

■■■ ■■ ■

■■■

■■■■

■

■■■

Improved Quality and Performance■■■■

redexA Group Company

A complete range of Uncoiler and CoilerMinimal lubrication or Wet operationWarm and hot rolling confi guration

High Dynamic Servo hydraulic screw down systemWater cooled Carbide Rolls for long life operationAlternative High precision Servo mechanical screw down systemStrong Universal Rolling Stand for heavy duty roughing or fi nishing applicationEasy change from 2Hi to 4Hi confi guration Operator friendly including predictive Maintenance and Rolling Calculation modelFully automatic reversing mode for bars and stripsContinuous Measurement of ThicknessSmooth operating main drives (twin drive solution or pinion stand with one single drive)

Fast opening and precision prepositioning of the roll gap High accuracy tension control and control of thicknessAutomatic gauge control (AGC) and Mass Flow Control High Accuracy thickness control with tolerances of fi nal product shown in μm

Low energy consumption and reduced footprintQuick change of roll cassettes Full digital control through Bühler Redex’s fi rmwareEffi cient Life cycle service, Roll service, Training, Roll Sche-dule support, Spare PartsEffi cient Hot Line with remote control for Teleservice

Technical Data FRM 3 FRM 4Roll force 2Hi / 4HiInfeed material thickness

Coil Weight kg mm

kN

FRM 1 FRM 2 FRM 5400 / 200

8050

800 / 600

15050

1600 / 1000

170 500

3100 / 1400

200 1000

5000 / 1600

350 5000

Infeed material widthmm 15 15 50 50 100

Rolling Mill Management with pre-calculation and storage of Roll Schedule Full range of uncoiler boxes for casted incoming material including pre-levelling machine

■ ■