Download - DENZ · 2020-01-27 · Remote controlled projector for all cine lenses up to an image circle of Ø60mm With DENZ you can measure, not only test! Guaranteed accuracy of 2μm! *All

Transcript

DENZFinest camera accessories

since 1970

.

www.denz-deniz.com [email protected] phone +49 89629866-0

1

Valid from February 1st, 2020

Remote controlled projector for all cine lenses up to an image circle of Ø60mm

With DENZ you can measure, not only test!Guaranteed accuracy of 2μm!

*All list prices are in EUR, EXW Ottobrunn/Germany without VAT, packing, freight charges, transport insurance, customs etc. Open prices,subject to being unsold, subject to change without notice. The general terms and conditions of DENZ Präzisions-Entwicklung GmbH apply.

www.denz-deniz.com [email protected] phone +49 89629866-02

LEDA High-Power COB-LED generates a homogeneous brightness of up to 20.000lm at 6000K. Using this brightness all big image circles can be inspected at large distances. Its intensity can be dimmed continuously.

Remote OperationAll settings of MFC65 projector are completely remote-controllable. The controls can found on the touch display on the housing and on the WiFi tablet. Lens motors can move the lens to any position, while a HD-webcam watches every setting. The camera is mounted to a gooseneck and can be clamped to the rods. This image is then streamed to the tablet.The lens motors calibrate themselves to any mounted lens to max/min position of the scaling.As a result, a single user can test a lens without leaving the projection wall.

Future-proofLens mount and reticle are designed to be interchangeable and to be able to adapt to future developments in medium format cine technology.

MountIts DENZ Basic Mount 87 features an extremely short flange focal depth of 10mm, which allows adaptation of all common mounts in cinema/photo to the MFC65. With the wide diameter of 87mm free aperture and a positive lock it is well suited for all the coming lens mounts for medium format such as XPL or the like.

ReticleThe reticle DENZChart65 is swappable by the user and comes in a high-precision stainless steel mount. The flange distance of the reticle is controlled by a motor and can be set to a precision of +-1µm between 3mm. To reach maximum precision the measurement system is integrated in the linear guidance of the reticle, so physical measurement errors are completely avoided.

The DENZChart65 features all modern sensor formats and allows the inspection of local resolution of spherical and anamorphic lenses.

MarkingsSensorformats: 1“, MFT, APS-C, Super35, RED Helium, Full Frame, PV Vistavision/DXL, Alexa 65, Medium Format Line Pairs 12-200lp/mmSiemens Stars, anamorphic Siemens Stars CrossHair, Frames und Image circle for S35 and FF. Image circle ruler to inspect illuminated diameter in mm.

*All list prices are in EUR, EXW Ottobrunn/Germany without VAT, packing, freight charges, transport insurance, customs etc. Open prices,subject to being unsold, subject to change without notice. The general terms and conditions of DENZ Präzisions-Entwicklung GmbH apply.

www.denz-deniz.com [email protected] phone +49 89629866-03

Initial Setup of MFC65MFC65 is a stationary projector of 17 kg / 37,47 lbs. All tools for setup are integrated into the housing: a 40mm bubble level and three adjustable legs are used to set up the projector. An integrated laser helps to align the projector perpendicular to the projection wall using a mirror and his reflection. This laser also helps as a fixed point during zooms, when the projection might move due to lens inaccuracy. The distance meter is integrated to measure the exact position to the projection-wall, the result can be seen on touchscreen and tablet.

Course of operationDuring start-up the projector moves the reticle to the calibrated flange distance value. The lens to be inspected is inserted into the mount and the lens control motors can be mounted to the gear rings of the lens. Using the touch display the calibration of the lens motors is started. Also, the webcam can be oriented to the witness marks using the gooseneck.Now all settings can be remote controlled by the tablet.

Optical FlatFilter Simulation ModuleDigital cameras will have glass filters permanently mounted in front of the sensor for protective and imaging reasons; for example, cover glasses and optical low-pass filters (OLPF) respectively.Modern lens designs intended for use with digital cameras will often include the presence of such a filter in their optical calculations, meaning that proper evaluation of such lenses requires that the filter be reproduced in the test projector.This capability has been designed into the MFC65

All MFC65 lens mount adapters allow for use of a filter simulation module having the common lens manufacturer design standard of 3mm glass thickness.Denz MFC65 filter simulation module glass is precision-ground to the highest optical standards and fully anti-reflection coated.When using a filter glass, the physical flange depth needs be increased by approximately one-third of the glass thickness.The MFC65 has been designed such that it can internally compensate for this increase in flange depth at the push of a button on the touch screen.

*All list prices are in EUR, EXW Ottobrunn/Germany without VAT, packing, freight charges, transport insurance, customs etc. Open prices,subject to being unsold, subject to change without notice. The general terms and conditions of DENZ Präzisions-Entwicklung GmbH apply.

www.denz-deniz.com [email protected] phone +49 89629866-04

Mount Adapter Preset SystemAll projectors having an intermediate mount are subject to manufacturing tolerance variance between the mount adapters used. This requires adjustment of the flange depth between mount and chart when the mount adapters are swapped.With traditional projectors, the amount of flange depth adjustment required needed to be noted separately and thechart position needed to be manually driven.With the MFC65, the process is automatic, saving time and eliminating possible error.

Consideration and data entry of the manufacturing tolerances of the lens adapterEach MFC65 mount adapter is factory-measured and given a unique ID code containing its manufacturing tolerance.This code is entered into the database of the MFC 65 when the adapter is put into service. The adapter can then be givena name by the user for easy reference.

Upon swapping mount adapters, the adapter to be used is selected by the user from the internal database.The MFC65 then automatically drives the chart position so that the flange depth is correctly zeroed with the specifiedmount adapter in place.

*All list prices are in EUR, EXW Ottobrunn/Germany without VAT, packing, freight charges, transport insurance, customs etc. Open prices,subject to being unsold, subject to change without notice. The general terms and conditions of DENZ Präzisions-Entwicklung GmbH apply.

www.denz-deniz.com [email protected] phone +49 89629866-05

*All list prices are in EUR, EXW Ottobrunn/Germany without VAT, packing, freight charges, transport insurance, customs etc. Open prices,subject to being unsold, subject to change without notice. The general terms and conditions of DENZ Präzisions-Entwicklung GmbH apply.

www.denz-deniz.com [email protected] phone +49 89629866-0

Lens Mount Adapter System

Precision Optical Flat:To simulate filter between digital sensor and lens. Glass is precision ground with anti-reflection coating.The necessary increase in flange depth is compensated by the MFC 65 internally.

Optical Flat Ø75302.0191

All mount adapters include front and rear caps!

XPL-60302.0202

LPL Rotating302.0204

LPL Standard302.0203

PL (Angenieux)302.0207

Sony E302.0201

Canon EF302.0201

LPL LDS302.0189

PL LDS302.0190

Optical Flat Ø52302.0192

PV SP70302.0205

IntermediateARRI Amira + Alexa Mini

302.0196

IntermediateRED DSMC302.0197

For use of native camera mount

6

*All list prices are in EUR, EXW Ottobrunn/Germany without VAT, packing, freight charges, transport insurance, customs etc. Open prices,subject to being unsold, subject to change without notice. The general terms and conditions of DENZ Präzisions-Entwicklung GmbH apply.

www.denz-deniz.com [email protected] phone +49 89629866-0

MFC65 DENZ Basic Mount to PL Adapter / Angenieux EZ

PL mount adapter with access holes to Angenieux standard for adjustment of zoom centering while lens is on projector. For use with Angenieux EZ-series zooms.

With the new MFC65 PL adapter for Angenieux, the lens technician can access all the centering screws in themounts of Angenieux EZ zooms while the lens is on the projector. Guesswork is thus eliminated and servicetime is reduced. The PL adapter for Angenieux is of course also compatible with all other PL lenses.This adapter is yet another example of the growing flexibility and diversity of the MFC65 product program,and the ability of DENZ to quickly meet customers‘ needs

7

*All list prices are in EUR, EXW Ottobrunn/Germany without VAT, packing, freight charges, transport insurance, customs etc. Open prices,subject to being unsold, subject to change without notice. The general terms and conditions of DENZ Präzisions-Entwicklung GmbH apply.

www.denz-deniz.com [email protected] phone +49 89629866-0

MFC65 DENZ Basic Mount to Canon EF / Electronic

With the new MFC65 electronicmount adapter, all these functionscan be controlled and all data comingfrom the lens can be read.As the MFC65 integrates anadvanced control interface into thebasic projector, there is no need tobuy an additional lens control setupin order to use the electronic EFmount. All functions can becontrolled and all data can be readdirectly from the MFC65 integratedtouch screen. Of course, all functionsand data readouts are also accessiblevia the MFC65 optional WiFi remotetablet.

8

Canon EF mount adapter with full electronic control of iris andfocus. Power provided for lenses with Image Stabilizer. Datareadout supported both directly on MFC65 main projectorscreen and optional remote WiFi tablet.

The new MFC65 Electronic Canon EF adapter allows the lenstechnician to fully evaluate the performance and function ofEF-mount lenses. Working with EF-mount lenses in projectionhas often had limitations in the past because these lenseshave no mechanical iris control, so it has often not beenpossible to evaluate performance when stopped down. Inaddition, many EF lenses require power to the ImageStabilization (IS) element for proper centering, even if thestabilization function is not switched on.

*All list prices are in EUR, EXW Ottobrunn/Germany without VAT, packing, freight charges, transport insurance, customs etc. Open prices,subject to being unsold, subject to change without notice. The general terms and conditions of DENZ Präzisions-Entwicklung GmbH apply.

www.denz-deniz.com [email protected] phone +49 89629866-0

MFC65 WiFi TabletWith Digital Focus Knob Unit

The Focus Knob Unit is quickly and easily mounted onto the WiFi Tablet and allows for fine, precise adjustment of focusduring lens inspection. The lens technician can simultaneously see the actual lens ring settings via the witness markwebcam.

The focus knob has adjustable friction for exacting feel when driving the lens motors, and variable mapping of any desiredrange to the knob can be performed via the MFC65 tablet app.

9

302.0175 Remote Control Package € 4.950,00*Handwheel control setup for IPAD Mini inclues as follows:- includes handwheel unit with holding grip- software app.- IPAD Mini- Focus Knob- Webcam- lens control motor with 0.8m gear + cable for lens motor

Allows for independent remote control of two lens motors(302.0178) and chart (reticle) position via instantly-switchablehandwheel. Lens can be read in real time via use of witnessmark camera 302.0177. Each control axis has variable speedand reversible direction. Stepless adjustable damping allowsfor especially fine manual control. Both wireless and cabledmodes are supported. 1/4" thread on main bracket allows foreasy mounting on tripod head.

Technical dataDENZ Basic Mount DB MountFlange Focal Length: 10mmFree aperture mount: Ø87mm Lens support: 19mm rodsPrecision: resolution ≤ 2µm

+/- 1.5mm

Light source: max 20.000lm COB LEDdimmable continuously6500 Kelvin (another Kelvin on request)90.000 hours

Distance meter: up to 20m (65,61ft), resolution 2cmLaserpointer: 532nm <1mWConnections: 2 x Lemo for lens-control motor

1 x working light 12V XLR1 x RJ 45 ethernet1 x Lemo for webcam1 x 110-220 VAC

Wireless: WiFi insideVoltage: 110-240VAC/ 50,60HzDimensions (LxWxH): 350mm x 270mm x 310mm; 13,77x10,62x12,20inchWeight: 17 kg / 37,47 lbs

*All list prices are in EUR, EXW Ottobrunn/Germany without VAT, packing, freight charges, transport insurance, customs etc. Open prices,subject to being unsold, subject to change without notice. The general terms and conditions of DENZ Präzisions-Entwicklung GmbH apply.

www.denz-deniz.com [email protected] phone +49 89629866-010

302.0174 Medium Format Projector incl. € 19.750,00*Reticle DENZChart65 in precision mount (swappable)LED Light EngineDENZ Basic Mount Ø87 (DB87)Integrated Touch Screen, dimmableIntegrated Distance Finder (m/ft)Integrated Laserpointer / greenIntegrated Electronic Bubble Level, 1,57”Adjustable levelling feetTandem Bracket iris rod mount for 15mm LWS, 19mm Studio and 19mm DENZ Anti-SagWorking light 12V, XLRProtection port capReticle mounting/changing toolIntegrated WiFi-readySoftware updates for 24 months are included in purchase price

302.0175 Remote Control Package complete with Tablet incl. Focus Knob Unit + Webcam + lens control motor € 4.950,00*Apple iPad Mini WiFi touch tablet with dimmable screeniOS App for complete projector remote control and lens barrel live view(Lens barrel live view also requires 302.0177)Mounting brackets for parking tablet on projectorSoftware updates for 24 months are included in purchase price

302.0179 Reticle DENZChart65 in precision mount – spare part € 1.650,00*302.0180 Reticle DENZChart65 without precision mount – spare part € 950,00*302.0184 Anti-Sag trapezoid rod support for heavy lenses

(requires 19mm lens support e.g. 301.0008) € 745,00*301.0008 lens support for 19mm rods with 3/8" screw, adjustable for hight € 440,00*

easy to click and clamp

*All list prices are in EUR, EXW Ottobrunn/Germany without VAT, packing, freight charges, transport insurance, customs etc. Open prices,subject to being unsold, subject to change without notice. Subject to change in the progress of technical progress. Protected rightsregistered. The general terms and conditions of DENZ Präzisions-Entwicklung GmbH apply.

www.denz-deniz.com [email protected] phone +49 89629866-0 11

*All list prices are in EUR, EXW Ottobrunn/Germany without VAT, packing, freight charges, transport insurance, customs etc. Open prices,subject to being unsold, subject to change without notice. Subject to change in the progress of technical progress. Protected rightsregistered. The general terms and conditions of DENZ Präzisions-Entwicklung GmbH apply.

www.denz-deniz.com [email protected] phone +49 89629866-0

302.0207 Precision adapter for DENZ Basic Mount to PL / Angenieux EZ € 1.675,00*302.0200 Precision adapter for DENZ Basic Mount 87 to Sony E, positive locking € 1.675,00*302.0201 Precision adapter for DENZ Basic Mount 87 to Canon EF, positive locking € 1.845,00*302.0208 Precision adapter for DENZ Basic Mount to Canon EF / Electronic tba*302.0202 Precision adapter for DENZ Basic Mount 87 to XPL-60 € 1.650,00*302.0203 Precision adapter for DENZ Basic Mount 87 to LPL € 1.650,00*302.0204 Precision adapter for DENZ Basic Mount 87 to LPL Rotating € 2.475,00* 302.0189 Precision adapter for DENZ Basic Mount 87 to LPL LDS tba302.0190 Precision adapter for DENZ Basic Mount 87 to PL LDS tba302.0205 Precision adapter for DENZ Basic Mount 87 to SP 70 € 2.300,00* 302.0221 Precision adapter for DENZ Basic Mount 87 to Canon RF tba*302.0223 Precision adapter for DENZ Basic Mount 87 to MFT tba* 302.0224 Precision adapter for DENZ Basic Mount 87 to Nikon NZ tba*302.0225 Precision adapter for DENZ Basic Mount 87 to Leica L tba*

302.0196 Intermediate adapter for DENZ Basic Mount to ARRI Amira + Alexa Mini € 2.150,00* 302.0197 Intermediate adapter for DENZ Basic Mount to RED DSMC € 2.300,00*

302.0191 Optical Flat Ø75 € 495,00*302.0192 Optical Flat Ø52 € 450,00*

12

MARK II

To adjust the flange depth makes the DENZ PLC unique among projectors of this size and price class!

*All list prices are in EUR, EXW Ottobrunn/Germany without VAT, packing, freight charges, transport insurance, customs etc. Open prices,subject to being unsold, subject to change without notice. The general terms and conditions of DENZ Präzisions-Entwicklung GmbH apply.

www.denz-deniz.com [email protected] phone +49 89629866-0

Compact test projector for full frame lenses

13

MARK II

Properties• Analogue positioning for robust operation: free of float, low maintenance, thermal safe• Test range flange focal length: 1.5mm• Reading accuracy scale ring < 10µm (smallest division) • DENZ testchart incl. image formats for: FullFrame (36.0 x 24.0), RED Helium, Super35, APS-C,• MFT, 1“• Siemensstars and linepairs 12-200 lp/mm; anamorphotic Siemenstars 2:1• LED optimized for homogeneous illumination• Up to FullFrame; no exchange of lamps necessary• Brightness 4200lm• 6000K • Thermo-safe: active cooling enables operation for hours, lamp housing cooled by new• Developed indirect cooling to prevent pollutants• Emergency-off when overheated• 1-button interface: Dimmable in 4 steps: 0%, 25%, 50%, 100% brightness

Rigid Mounts for Stability• ARRI PL• ARRI LPL• Sony E-Mount, Lever Lock

Additional Features• Illuminated bubble level to align projector• Working light 20cm goose-neck • Cold shoe for external accessories• Power supply by 24V at 100-240VAC, 50-60Hz, fixable at tripod• Calibrating set consisting of: PL-flange 10mm, dial gauge (0.001), standard measure and measure mirror• Tripod connection: 3x ¼” threading for camera plate or on stand

*All list prices are in EUR, EXW Ottobrunn/Germany without VAT, packing, freight charges, transport insurance, customs etc. Open prices,subject to being unsold, subject to change without notice. The general terms and conditions of DENZ Präzisions-Entwicklung GmbH apply.

www.denz-deniz.com [email protected] phone +49 89629866-014

MARK II

- LPL-Mount for testing of all modern full frame lenses

- Flange focal depth 44mm

- Also compatible with ARRI LPL-to-PL Adapter for use with PL lenses - Breech lock with Ø62mm matingdiameter

-Test chart Mark II with center cross and continuous frame lines for evaluation of barrel and pincushiondistortion

- Flange adjustment accuracy 1/100mm

- Incl. gooseneck lamp and power supply

Accounting for glass filters behind the lensDigital cameras utilize filters between sensor and lens for protective and imaging purposes, such as low-pass (OLPF), UV, IR and ND. In general, such glass filters will cause an increase in focal flange depth of 1/3 the glass thickness, and this must be provided for along with a suitable test optical flat filter. The PLC-LPL is prepared for these cases and is available in two variants.

*All list prices are in EUR, EXW Ottobrunn/Germany without VAT, packing, freight charges, transport insurance, customs etc. Open prices,subject to being unsold, subject to change without notice. The general terms and conditions of DENZ Präzisions-Entwicklung GmbH apply.

www.denz-deniz.com [email protected] phone +49 89629866-0

To adjust the flange depth makes the DENZ PLC unique among projectors of this size and price class

15

MARK II

302.0167 Portable Lens Checker for PL-Lenses € 6.150,00*302.0194 Portable Lens Checker for ARRI LPL-Lenses, focal flange depth 44mm € 6.150,00*302.0168 Portable Lens Checker for Sony E-Lenses € 6.150,00*302.0169 Top handle for PLC € 268,00*

Technical DetailsLED 4200 LMDimmable 0, 25%, 50%, 100%Color temperature 6000KResolution 10mm (smallest division)Adjustment range +- 0,7mmMounts PL, LPL, EPower DC24VAlignment Bubble LevelRoom temperature 15-40°COperation Manuel Adjustment RingWorking Light LED Light 12V, 8“Dimensions (LxWxH) mm: 260x85x95

*All list prices are in EUR, EXW Ottobrunn/Germany without VAT, packing, freight charges, transport insurance, customs etc. Open prices,subject to being unsold, subject to change without notice. The general terms and conditions of DENZ Präzisions-Entwicklung GmbH apply.

www.denz-deniz.com [email protected] phone +49 89629866-0

Conversion kit for optical flat for LPL-Mount

When using the optical flat (precision glass, anti-reflective both sides, mounted in threaded ring) the focal length depth is shifting.

When using the optical flat (precision glass, anti-reflective both sides mounted in threaded ring, the focal length depth will shift.The conversion kit contains a corresponding precision intermediate ring

Using the special tool (part 3), the precision optical flat (part 1) is screwed or unscrewed into the projector socket. The flange depth of the PLC-LPL of the PLC-LPL is factory-adjusted to 44 ±0.01mm.

The optical flat can be retrofitted anytime!

16

Checking the flange focal distance with FDC provides an exact indication of the amount and direction (+ and -) of the deviation between the actual flange focal distance and the ideal flange focal distance.This allows you to determine the combination of necessary adjustment foils (shims) to correct the flange focal distance. The formerly slow and tedious approach to the flange focal distance is no longer necessary.For stationary use, e.g. in a studio, the FDC can be powered by a mains adapter (AC/DC:in: 100-240V; 50-80 Hz; 300 mA // out: 5V; 1.5 A) Another possibility is, using the unit with a DC 3V battery which makes the FDC-multi very attractive for an easy handling on set, bringing laboratory accuracy to the field. When the FDC is mounted on your camera you can start the measuring procedure. The flange depth of PL mounts can be measured directly. On top of that shorter flange focal distances, like EF-, MFT-, E- und F-Mount-cameras, can be measured with the same accuracy as well by adding the respective adapter (only possible with the FDC multi). The FDC provides a highly accurate connection which does not alter the measurement accuracy.Evaluating the flange focal depth is based on projecting a red bar and a pair of green bars from different optical axis onto the chip. In the right distance from the projective system the red bar comes to lie right between the green bars forming a symmetrical image that can be

easily recognized looking at a monitor that is connected to the video output of the camera.

*All list prices are in EUR, EXW Ottobrunn/Germany without VAT, packing, freight charges, transport insurance, customs etc. Open prices,subject to being unsold, subject to change without notice. The general terms and conditions of DENZ Präzisions-Entwicklung GmbH apply.

www.denz-deniz.com [email protected] phone +49 89629866-017

Adapter ring XPL (only usable for FDC multi)

302.0162 ARRI XPL 60mm adapter € 2.865,00*302.0161 Vantage/RED XPL 52mm adapter € 2.625,00*

With these adapter rings for FDC multi, it is possible to measure the flange distance of cameras with XPL-Mount (Alexa 65) or XPL-52mm-Mount (Vantage modification for RED weapon 8K “Helium”). With the high-precision adapter rings, you can measure the flange distance as easy as usual: First, set the corresponding ring onto the FDC multi. Then set the FDC multi with the adapter ring onto the camera. Now you can perform your measurements with the FDC.The individual components of the adapter rings are manufactured and assembled in Germany under permanent quality control, with the most advanced CNC machining-centers. Materials have been chosen to meet highest demands on temperature reaction and durability.Please note that when using the XPL-Adapter the indicated value of 52,00 corresponds to a flange focal distance of 60,00mm. Using the XPL-52mm-Adapter the flange distance is 52,00 mm as indicated!

*All list prices are in EUR, EXW Ottobrunn/Germany without VAT, packing, freight charges, transport insurance, customs etc. Open prices,subject to being unsold, subject to change without notice. The general terms and conditions of DENZ Präzisions-Entwicklung GmbH apply.

www.denz-deniz.com [email protected] phone +49 89629866-018

Adapter ring (only usable for FDC multi)

190.0007 FDC classic, PL-Mount € 3.800,00*190.0126 FDC classic, PV-Mount € 5.290,00*

190.0028 FDC LPL-Mount € 4.950,00* coming soon

190.0028 FDC multi, PL-Mount € 4.700,00*

302.0150 FDC adapter Sony E-mount € 1.450,00*302.0134 FDC adapter MFT-Mount € 1.450,00*190.0029 FDC adapter EF/EFS-Mount € 1.400,00*302.0220 FDC adapter RF-Mount € 1.450,00* coming soon302.0151 FDC adapter Nikon F-Mount € 1.950,00*

*All list prices are in EUR, EXW Ottobrunn/Germany without VAT, packing, freight charges, transport insurance, customs etc. Open prices,subject to being unsold, subject to change without notice. The general terms and conditions of DENZ Präzisions-Entwicklung GmbH apply.

www.denz-deniz.com [email protected] phone +49 89629866-0

With these adapter rings for FDC multi , it is possible to measure the flange distance of cameras with Canon EF-mount, Sony E-Mount, MFT- or F-Mount mount with the same accuracy, well-known from the FDC. So it is possible to use the FDC multi even more effective, because you can control the focal flange distance of more camera types.With the high-precision adapter rings, you can measure the flange distance as easy as usual: First, set the corresponding ring onto the FDC multi. Then set the FDC multi with the adapter ring onto the camera. Now you can perform your measurements with the FDC. The individual components of the adapter rings are manufactured and assembled in Germany under permanent quality control, with the most advanced CNC machining-centers. Materials have been chosen to meet highest demands on temperature reaction and durability.

Please note that when using the Adapter the indicated value of 52,00 corresponds to a flange focal distance of44,00 mm with EF-Mount-Adapter19,25 mm with MFT-Mount-Adapter18,00 mm with E-Mount-Adapter46,50 mm with F-Mount-Adapter20,00 mm with RF-Adapter

19

FDC Master Mark II

302.0212 FDC master, Mark II, PL-Mount EUR 4.250,--*

*All list prices are in EUR, EXW Ottobrunn/Germany without VAT, packing, freight charges, transport insurance, customs etc. Open prices,subject to being unsold, subject to change without notice. The general terms and conditions of DENZ Präzisions-Entwicklung GmbH apply.

www.denz-deniz.com [email protected] phone +49 89629866-0

FDC Master is used to detect and correct measurement deviations which may occur when frequently using the flange depth controllers FDC Classic and FDC Multi over a longer periods of time. These deviations can affect measurement results. FDC Master is used to calibrate the devices correctly.The devices are tested using a super high-resolution monochrome camera which displays the FDC’s testing image on a monitor. Should the calibration of the FDC device need correction, then this can easily and directly be performed by using the scale ring.The FDC Master is the embodied Flange Focal Distance. It resembles a camera that is reduced to its least number of parts. Machined with micron accuracy, it is a tool that you can rely on and use to verify the scale on your FDC or recalibrate it.

20

now with SDI Output!

DENZ OIC FFDirector‘s viewfinder for full frame lenses

by request reversible to anamorphic lenses

- Full-Frame-Plus coverage- Interchangeable mount system with LPL and PL mounts immediately

available, others to follow- Eyepiece with ±4 diopter adjustment and long eye relief- New DENZ ground glasses - sturdy and acetone-safe- Ergonomic, universal cherry wood handgrip with DENZ soft-touch

coating and slip-proof quick-adjustment Hirth pivot-hinge for ideal comfort adjustment

- Special bracket (made from Konstructal AW7075) anodized, used forbalance point optimization through three "variable" attachment points

- ¼“-thread at the bottom of the handgrip for monopod-use

This product is patent pending!

302.0211 OIC FF Director´s Viewfinder, eyepiece, leather shoulder strap, € 8.400,00*including shift (2.0:1) to anamorphic lenses302.0214 OIC FF: Shifting to anamorphic lenses, modul incl. glass 2.0 : 1 (spare part) € 2.345,00*302.0242 OIC FF: Shifting to anamorphic lenses, modul incl. glass 1.5 : 1 € 2.345,00* 302.0215 PL-Mount for OIC FF € 950,00*302.0216 LPL-Mount for OIC FF € 950,00*302.0238 Panavision SP70-Mount for OIC FF (available March 2020) € 950,00*302.0218 Ground glass for OIC FF, LF Open Gate € 420,00*302.0219 Ground glass for OIC FF, Combination LF16:9 and 2.39:1 € 420,00*302.0244 Ground glass for OIC FF, customized version € 520,00*

format specification by customer, delivery time 6-8 weeks after PO302.0219 Ground glass for OIC FF, blank € 190,00*302.0133 ergonomic, universal handle with DENZ-soft- touch coating € 640,00*302.0132 special bracket € 360,00*404.0020 eye piece cover for eyecup, red, oval shape € 8,00*402.0007 leather shoulder strap (spare part) € 56,00*

*All list prices are in EUR, EXW Ottobrunn/Germany without VAT, packing, freight charges, transport insurance, customs etc. Open prices,subject to being unsold, subject to change without notice. The general terms and conditions of DENZ Präzisions-Entwicklung GmbH apply.

www.denz-deniz.com [email protected] phone +49 89629866-021

DENZ OIC35-ADirector‘s viewfinder for anamorphic & spherical lenses

- Interchangeable anamorphic / spherical settings

- Available with PL- or PV-Mount

- Flexible eyepiece with diopter adjustment ± 5.0

- Compatible with ARRIFLEX ground glasses 435/535

- Different DENZ ground glasses available

- Ergonomic, universal handgrip (manufactured from Cherrywood) with DENZ soft-touch coating

- Integrated pivot-hinge with Hirth gearing and clampfor an ideal adjustment of the handle

- Protection against twisting by DENZ system

- Special bracket (made from Konstructal (AW7075)anodized) used for balance point optimizationthrough three "variable" attachment points

- ¼“-thread at the bottom of the handgrip formonopod-use

301.0626 OIC 35-A Director´s Viewfinder, eyepiece, leather shoulder strap, PL - Version € 6.900,00*301.0641 OIC 35-A Director´s Viewfinder, eyepiece, leather shoulder strap, PV - Version € 7.060,00*302.0133 ergonomic, universal handle with DENZ-soft- touch coating € 650,00* 302.0132 special bracket (balancing for heavy lenses) € 360,00* 404.0025 soft-leather-cover for eyecup € 10,00*402.0007 leather shoulder strap (spare part) € 56,00*

*All list prices are in EUR, EXW Ottobrunn/Germany without VAT, packing, freight charges, transport insurance, customs etc. Open prices,subject to being unsold, subject to change without notice. The general terms and conditions of DENZ Präzisions-Entwicklung GmbH apply.

www.denz-deniz.com [email protected] phone +49 89629866-022

DENZ OIC35Director‘s viewfinder for spherical lenses.

- Available with PL- or PV-Mount

- Compatible with ARRIFLEX ground glass 435/535

- Special DENZ ground glass SCOPE available (1:2.39 with 1:1.33)

- Eye piece with a linear extension (diopter -4 / +3.5)for right and left viewing

- Ergonomic universal handgrip (made from cherry wood) with DENZ soft-touch coating

- Integrated pivot-hinge with Hirth gearing and clamp clamp for an ideal adjustment of the handle

- Protection against twisting thanks to the special DENZ system

- ¼“ threaded hole on the bottom of the handgrip forMonopod mounting

- Special bracket (made of Constructal (AW7075), anodized)for balance point optimization through three "variable" attachment points

402.0000 OIC 35, director’s viewfinder, eyepiece, leather shoulder strap, PL - Version € 2.500,00*402.0011 OIC 35, director’s viewfinder, eyepiece, leather shoulder strap, PV – Version € 3.315,00*302.0133 ergonomic, universal handle with DENZ-soft- touch coating € 640,00* 302.0132 special bracket (balancing for heavy lenses) € 360,00* 404.0025 soft-leather-cover for eyecup € 10,00*402.0007 leather shoulder strap (spare part) € 57,50*

*All list prices are in EUR, EXW Ottobrunn/Germany without VAT, packing, freight charges, transport insurance, customs etc. Open prices,subject to being unsold, subject to change without notice. The general terms and conditions of DENZ Präzisions-Entwicklung GmbH apply.

www.denz-deniz.com [email protected] phone +49 89629866-023

DENZ Ground Glassesfor DENZ director’s viewfinder OIC35 + OIC35-A

DENZ Ground glasses commonly serve as a framing reference for a desired aspect ratio

302.0149 Ground Glass 1:1.85 combined with 1:2.35 € 650,00*302.0154 Ground Glass 1:1.78 € 650,00*302.0172 Ground Glass Scope 1:2.39 with 1:1.33 € 650,00*402.0008 Ground Glass tool for OIC-35/OIC-35A – spare part € 34,00*

*All list prices are in EUR, EXW Ottobrunn/Germany without VAT, packing, freight charges, transport insurance, customs etc. Open prices,subject to being unsold, subject to change without notice. The general terms and conditions of DENZ Präzisions-Entwicklung GmbH apply.

www.denz-deniz.com [email protected] phone +49 89629866-024

DENZ Shut Eye Heater for Panasonic OLED VF AU-VCVF1G

404.0047 Shuteye with heating of two settings € 980,00*404.0048 Spiral cable Shut-Eye Heater, lemo >> open end (length 270-650mm) € 165,00*

The heated eyecup is used to prevent the eyepiece lenses from fogging up on a cold film set. It has been newly developed, taking into account today’s field requirements. Due to the robust construction of the eyecup, broken heater rings belong to the past. The ergonomic design decreases the strain on the eye of the cinematographer to a minimum. Made from non-toxic silicone rubber, which is also kind to the skin..

Features• Unbreakable heater-ring• Built-in iris closure• Heating power not depending on the supply voltage• LED status indicator• Two different temperature settings• LO for normal use, and for saving current• HI for low temperatures down to -18°C / 0°F• No residual current when switched-off

SpecificationsPower Supply• 10 – 32 VDC (to use on 12V and 24V cameras)• inverse polarity- protection safety shutdown at over

voltage and under-voltage

Warning! If the supply voltage is too high (> 40V), the electronic circuit of the eyecup might be damaged.

Current consumption• approx. 0.54 A at 12 VDC• approx. 0.30 A at 24 VDC• no residual current when switched-offHeating power• approx. 7 W not depending on the supply voltage• two different temperature settings• LO for normal operation, and for saving current.

*All list prices are in EUR, EXW Ottobrunn/Germany without VAT, packing, freight charges, transport insurance, customs etc. Open prices,subject to being unsold, subject to change without notice. The general terms and conditions of DENZ Präzisions-Entwicklung GmbH apply.

www.denz-deniz.com [email protected] phone +49 89629866-025

DENZ Shut Eye Heater (Sony)also usable for Sony VENICE CineAlta Camera

Fits to SONY viewfinder like DXF-20W, HDFVF-C30WR, HDVF-30W, HDVF-C35W and similar

404.0031 Shuteye with heating of two settings € 980,00*404.0033 Spiral cable lemo / hirose for Heated Shut-Eye € 285,00*

The heated eyecup is used to prevent the eyepiece lenses from fogging up on a cold film set. It has been newly developed taking into account today’s field requirements. Due to the robust construction of the eyecup, broken heater rings belong to the past. The ergonomic design decreases the strain on the eye of the cinematographer to a minimum.

• un-breakable heater ring • no residual current when switched-off• heating power not depending on the supply voltage • two different temperature settings• LO for normal use, and for saving current • LED status indicator• HI for low temperatures down to -18°C / 0°F • built-in iris closure• easy to clip-on to the eyepiece • ergonomic standard type

*All list prices are in EUR, EXW Ottobrunn/Germany without VAT, packing, freight charges, transport insurance, customs etc. Open prices,subject to being unsold, subject to change without notice. The general terms and conditions of DENZ Präzisions-Entwicklung GmbH apply.

www.denz-deniz.com [email protected] phone +49 89629866-026

Canon EOS C300/500DENZ Grip Unit Adapter

301.0476 DENZ Grip Unit Adapter Canon EOS C300/C500with integrated spiral cable and protection cap € 340,00*

301.0061 Universal adapter with Hirth-serration for 15mm rods € 152,00*

This special adapter is made to mount the original Canon grip unit wherever it needs to be placed in order to achieve the most ergonomic position.By using original plugs with a spiral cable and a Hirth serration the DENZ Grip Unit Adapter can be mounted to the DENZ Universal Handle System and any other system with a Hirth connection. With a DENZ Grip Unit Adapter it also can be mounted to diameter 15 mm rods and thus can be attached to any rig.The spiral cable with gold plated contacts relief you from cable tangle. The DENZ Grip Unit Adapter of course comes with a red aluminium protection cap.

*All list prices are in EUR, EXW Ottobrunn/Germany without VAT, packing, freight charges, transport insurance, customs etc. Open prices,subject to being unsold, subject to change without notice. The general terms and conditions of DENZ Präzisions-Entwicklung GmbH apply.

www.denz-deniz.com [email protected] phone +49 89629866-027

Universal Support DAVIDSmall, but strong.

► Height-adjustable with a high precision scale to controlthe desired height► Additionally Hirth serration angles can be attached forthe DENZ universal handle system and more► The heat vents are not covered. Free airflow through thebottom side is possible because of grit structure.► The bottom is prepared to be used with DENZ BP-multi,DENZ wedge plate ARRI BPs and more.► By individually using ¼”, 3/8” or retractable centering pinalmost every camera is compatible

301.0460 Universal support DAVID € 360,00*

301.0041 Hirth serration left OR right € 59,00*

*All list prices are in EUR, EXW Ottobrunn/Germany without VAT, packing, freight charges, transport insurance, customs etc. Open prices,subject to being unsold, subject to change without notice. The general terms and conditions of DENZ Präzisions-Entwicklung GmbH apply.

www.denz-deniz.com [email protected] phone +49 89629866-0

The Universal Support gives you the possibility tocombine nearly every camera, which is centricallymounted by 1/4” or 3/8” screws to a Ø 15mm rodsystem to use e.g. the DENZ follow focus, DENZuniversal handle system, or the DENZ shouldersystem.Besides the well known DENZ quality, which isguaranteed by the ultra-light weight(395gr/0,87lbs), high strengthened Konstruktalaluminum from the aerospace industry, whichensures a perfect durability.

28

DENZ Camera Plate BP-multiOne for all cameras.

301.0377 BP-multi special (also usable for DCB90) € 595,00/pc*301.0764 BP-multi II, beveled at the back for ARRI shoulder pad € 640,00/pc*301.0376 Adapter plate for levelling out the heights for standard accessory € 122,00/pc*suitable for RED Scarlet, Scarlet Dragon, Epic, Epic Dragon, Weapon, Epic Weapon

Both BP-Multi with improved contour for easy attachment to ARRI Alexa and other cameras. The camera plateis anodized black and made of materials that are commonly used in the aviation and space industry.

All cameras shall be fixed – according to threads – with 3/8 “or 1/4″ screws (screws are included).The BP-multi is designed for Ø19 mm rods. The dovetail plates (325mm, 450mm and 600 mm)fits to any camera.At the front and back (only at the BP multi special) there are two 1/4″ holes withdistance of 60mm, so you can also use Ø15mm rods.

You get the center offset of 16mm (like BP8) if you unscrew the mountingplate.The camera plate BP-multi is to be used for video and film cameras fromARRI, RED and SONY with a different separate adapter plates. You can get theheight difference with this adapter plate for using all standard accessories (compendium, studio follow focus, etc) of the

movie cameras. The adapter is made of the high-quality materials manufactured by DENZ standard and is also black anodized, supplied with two 3 / 8 "screws.

Weight: 370gr/0,81lb

*All list prices are in EUR, EXW Ottobrunn/Germany without VAT, packing, freight charges, transport insurance, customs etc. Open prices,subject to being unsold, subject to change without notice. The general terms and conditions of DENZ Präzisions-Entwicklung GmbH apply.

www.denz-deniz.com [email protected] phone +49 89629866-029

301.0377 301.0764

DENZ BP12combinded with the DENZ bridge plate system

The BP–multi special with BP12 adapter fits now to all common camera-manufacturer, like:Aaton, ARRI “Alexa”, Blackmagic, Canon, Phantom, Red, Sony a.s.o.

301.0377 DENZ universal-bridge-plate (BP-multi special) € 595,00*301.0649 DENZ BP12 adaptor € 148,00*301.0619 baseplate bottom 600mm (dove-tail) ultra-light! € 690,00*301.0653 baseplate bottom 440mm (dove-tail) ultra-light! € 575,00*301.0333 baseplate bottom 325mm (dove-tail) ultra-light! € 420,00*

*All list prices are in EUR, EXW Ottobrunn/Germany without VAT, packing, freight charges, transport insurance, customs etc. Open prices,subject to being unsold, subject to change without notice. The general terms and conditions of DENZ Präzisions-Entwicklung GmbH apply.

www.denz-deniz.com [email protected] phone +49 89629866-030

DENZHEADDutch Angle Camera Head

The DENZHEAD can roll digital and analog cameras around their optical axis by 180°, while keeping the rotational center on the optical axis. (The camera has to have standard height, by using an appropriate camera support.)In combination with an e.g. “Sachtler Touch & Go Plate” mounted on the bottom side of the DENZHEAD (a variety of mounting threads are available), the DENZHEAD becomes the quickest way to set up a third axis on top of a tripod.

301.0622 DENZHEAD in preparation for motor and control unit € 6.350,00*incl. quick release adapter and flexible shaft

Features- Drive unit with 3 transmissions (1:2, 1:1, 2:1) for a precisely operation- Made from hard-coated aluminium with Teflon® treated surface- Continuous adjustment (visual display of the angle)- Swivel range ± 90° (180°)

Technical data- Range of motion ± 90° (180°) round the optical axis- Size LxWxH: 297x125x114 (mm), 11,69x4,92x4,49 (inch)- Weight: 3,75kg/8,27lb - Payload: 10kg/22,05lb

*All list prices are in EUR, EXW Ottobrunn/Germany without VAT, packing, freight charges, transport insurance, customs etc. Open prices,subject to being unsold, subject to change without notice. The general terms and conditions of DENZ Präzisions-Entwicklung GmbH apply.

www.denz-deniz.com [email protected] phone +49 89629866-031

DENZ Follow Focus Mini evoFor high demands.

301.0677 DENZ Follow Focus Mini including 1x marking disc and 1x cine gear at your choice € 1.050,00*

220.0007 Focus Lever € 48,50*220.0009 Flexible shaft (30cm) with hand wheel € 85,00*

The DENZ Follow Focus Mini EVO convinces with its drive as well as the massive weight reduction (approx. 20%). The re-designed, infinitely adjustable drive adjustment allows the user to maintain an exactly adjustable degree of mechanical resistance. Together with the play-free mechanism, which can be adjusted by means of an eccentric, the DENZ Follow Focus Mini EVO allows an even more sensitive approach to the focus and avoids inadvertent overlaying of the desired sharpness.The start-up of already determined sharpening is made possible by setting two anchor points in a hand rotation. For lenses with a different rotation, the focus can be reversed quickly and easily. For the gear-free transmission to be effective, the articulated arm, which holds the drive pinion against the objective, is equipped with a particularly unyielding clamping mechanism. Its conical bearing surfaces are extra strong.The handwheel can be supplemented by a focus lever or a flexible shaft, to meet even more specific requirements.

Different cine gears are available:221.0004 cine gear: m 0,8; Ø29,6mm, t=37221.0005 cine gear: m 0,8; Ø36,0mm, t=45221.0006 cine gear: m 0,8; Ø46,4mm, t=58221.0007 cine gear: m 0,6; Ø39,6mm, t=66221.0008 cine gear: m 0,5; Ø40,0mm, t=89

*All list prices are in EUR, EXW Ottobrunn/Germany without VAT, packing, freight charges, transport insurance, customs etc. Open prices,subject to being unsold, subject to change without notice. The general terms and conditions of DENZ Präzisions-Entwicklung GmbH apply.

www.denz-deniz.com [email protected] phone +49 89629866-032

DENZ Lens and Rod Supportfor 15mm and 19mm rods

Due to the height adjustment mechanism of the DENZ Lens support “Max” for Ø15mm rods, ensures simple but secure self-locking.The DENZ Lens support is available with both 1/4 “-and 3/8” screws.It can also be easily mounted successively applying it laterally.- adjustable (11mm) and lockable- made from special Konstruktal F52 aluminum

302.0240 DENZ lens support unit for Ø15 mm bars € 350,00*including 1/4" lens screw + 3/8 " lens screw+ 2x bar spacer for 1/4" lens screw (11mm + 22mm)

*All list prices are in EUR, EXW Ottobrunn/Germany without VAT, packing, freight charges, transport insurance, customs etc. Open prices,subject to being unsold, subject to change without notice. The general terms and conditions of DENZ Präzisions-Entwicklung GmbH apply.

www.denz-deniz.com [email protected] phone +49 89629866-033

301.0008 DENZ lens support bridge for Ø 19 mm rods with 3/8" screw € 440,00*301.0004 DENZ Rod support for Ø19 mm rods € 295,00*301.0567 DENZ Rod channel for Ø19 mm rods € 145,00*

The Support Bridge for Ø19 mm rods , with the help of a quick use switch, the height and the horizontal position is adjustable.The quick use switch enables easy latching and interlocking. For example with a 3/8” screw, a lens can be fastened.For high durability and strength the Support Bridge is made out of Konstruktal-Aluminum (301.0008)

The Support Slide is recommended for use with carbon fiber or steel support rods a length of 440mm and 600mm. With a special adjusting knob it is possible to adjust the height position precisely (301.0004)

Rod channel for Ø19 mm rods, ultra lightweightfor dove tails (301.0567)

DENZ Kit for Sony PXW-FS7Rig up your camera in the style of DENZ.

301.0579 Premium Universal Handle System Standard € 1.250,00*301.0580 Premium Universal Handle System Deluxe with Start/Stopp feature € 1.550,00*

including cable at your choice: 301.0606 Spiral cable Lemo/ Hirose (Sony F5/F55, FS-7)301.0365 Spiral cable Lemo / Fischer ( ARRI)301.0623 Spiral cable Lemo / 2,5mm jack with LANC-protocol (Blackmagic)301.0207 Spiral cable Lemo / open end

By using the rod support bridge the Premium Universal Handle System fits for Ø15 mm and Ø19mm rods. Flexible and differing lengths of connection parts made from a special carbon fiber allow user-defined adaption and enable individual handling. By using our self-made, force-fitted Hirth joints with standard size, perfect stability is guaranteed. The handles are made out of olive wood for special comfort and perfect grip. The rest of the handling is made out of high strength and ultralight Konstruktalaluminum

Product Characteristics: - Suitable for 15mm und 19mm rods- Ergonomically adjustable with joints and arms with various lengths- Ergonomic and haptically optimizedhandles made of olive wood- Ultra-lightweight design with aluminumand carbon fiber- Supplied with a case for storage

*All list prices are in EUR, EXW Ottobrunn/Germany without VAT, packing, freight charges, transport insurance, customs etc. Open prices,subject to being unsold, subject to change without notice. The general terms and conditions of DENZ Präzisions-Entwicklung GmbH apply.

www.denz-deniz.com [email protected] phone +49 89629866-034

DENZ Camera AccessoriesSmall. Helpful. Versatile. Made to last!

*All list prices are in EUR, EXW Ottobrunn/Germany without VAT, packing, freight charges, transport insurance, customs etc. Open prices,subject to being unsold, subject to change without notice. The general terms and conditions of DENZ Präzisions-Entwicklung GmbH apply.

www.denz-deniz.com [email protected] phone +49 89629866-0

301.0060Hirth extension with thread adapter⅜”, M8, ¼”, M, 6⅜€ 155,00

301.0058Extension for Ø 15mm rods with inside (SW4) screw to connect the Hirth serration€ 185,00

301.09999Sony wedge-plate for Sony-PXW FS7 and other cameras incl. 4x screws and 1x Allen key€ 49,50

301.0057Rod clamp 360° for Ø 15mm rodsenables triaxially movement€ 85,00

301.0059Universal thread adapter⅜”, M8, ¼”, M6€ 68,00

301.0061Universal adapter for Ø15 rods with Hith serration€ 152,00

301.0421Aluminum rods, black,1pair with Ø 15mm¼” thread, length 90mm and 130mm

€ 68,00

301.0405 / 301.0416Cold shoe cube, ¼” or ⅜”different threads2x slide shoe€ 52,60

301.0524Support bridge (60mm) with Hirth serration connecting different accessories with distance€ 128,00

301.0523Universal-Rod Clamp 15/19mmclamping with Allen keyHirth serration, with M6 threaded bolt € 122,50301.0500Universal-Rod Clamp 15/19mmclamping with Allen keyHirth serration, with M6 thread € 96,00

301.0535Bridge for 15mm rodswith Hirth serration€ 185,00

404.0030Shut eye - closable eyecup to protect the display of the viewfinder € 190,00

35

DENZ Support Rods Ø 15mmMade from anodized Konstruktal aluminum,

the firmest and most durable aluminum!

DENZ designed for these rods a special threaded insert, which is centering in the master and chemically nickel-plated. No risk of cold-welding (seizing).Easy loosing is possible anytime.

For this products range you can get threaded inserts with ⅜ inch (301.0352) and ¼ inch (301.0351) to attach different accessories like monitors, lightning,etc.). The threaded inserts made from stainless steel (V4A).

Standard (female/female)301.0337 Length 50mm € 11,25/pc*301.0338 Length 80mm € 16,50/pc*301.0339 Length 120mm € 21,75/pc*301.0340 Length 160mm € 25,50/pc*301.0341 Length 200mm € 30,75/pc*301.0342 Length 240mm € 33,75/pc*301.0343 Length 300mm € 39,00/pc*

Extensions (female/male)301.0344 Length 50mm € 15,90/pc*301.0345 Length 80mm € 19,50/pc*301.0346 Length 120mm € 23,95/pc*301.0347 Length 160mm € 28,50/pc*301.0348 Length 200mm € 31,85/pc*301.0349 Length 240mm € 34,45/pc*301.0350 Length 300mm € 39,50/pc*

All rods can be equipped with red anodized end caps (301.0361)

*All list prices are in EUR, EXW Ottobrunn/Germany without VAT, packing, freight charges, transport insurance, customs etc. Open prices,subject to being unsold, subject to change without notice. The general terms and conditions of DENZ Präzisions-Entwicklung GmbH apply.

www.denz-deniz.com [email protected] phone +49 89629866-036

Support Rods Ø15mm and Ø19mmMade from carbon fibre, precisely manufactured

and ultra-light weight!

DENZ carbon fiber rods have excellent properties:▪ High strength▪ High modulus of elasticity▪ Good vibration reduction▪ Low material fatigue▪ Non-corrosive▪ Low thermal expansionThe strengths of the DENZ carbon fiber rods exceed much ofmetals and other composites

Carbon Fibre Rods Ø15mm partly equipped with push button for safety

303.0015 Length 50mm € 22,00/pair*303.0030 Length 65mm € 25,00/pair*303.0016 Length 150mm € 46,00/pair*303.0018 Length 250mm € 68,00/pair*303.0019 Length 350mm € 94,00/pair*303.0002 Length 450mm € 120,00/pair*

Carbon Fibre Rods Ø19mmthickness 2,5mm

303.0006 Length 240mm € 130,00/pair*303.0009 Length 340mm € 150,00/pair*303.0007 Length 440mm € 160,00/pair*301.0687-S Length 310mm € 150,00/pair*301.0687-S Length 350mm € 155,00/pair*301.0687-S Length 460mm € 167,00/pair*301.0687-S Length 615mm € 230,00/pair*303.0008 Length 600mm € 220,00/pair*303.0035 Length 700mm € 240,00/pair*

*All list prices are in EUR, EXW Ottobrunn/Germany without VAT, packing, freight charges, transport insurance, customs etc. Open prices,subject to being unsold, subject to change without notice. The general terms and conditions of DENZ Präzisions-Entwicklung GmbH apply.

www.denz-deniz.com [email protected] phone +49 89629866-037

www.denz-deniz.com [email protected] phone +49 89629866-0

38

Precision Manufacture of Components

We are a medium sized enterprise for the manufacturing and development of high precision parts and assemblies on our customers request – from small quantities to large assemblies!

We start where others stop …Our demanding customers come from the aerospace industry, motor sports, medical, high-tech industries as well as the film and television industry.We produce with the most modern CNC milling and turning machines on 2,800 m² production area parts are always based on our principles.

„Quality made by Denz“Due to our long-standing know-how, almost all materials are machined in accordance with the specifications from our clients.Our machining centers are CAM programmed. The design department works with 3D CAD systems and implements every customer requirement in the production area.To optimize our customers advice regarding the best design and economic production, a 3D rapid prototyping machine is used.For the process monitoring of our production, a fully air-conditioned measuring room with the latest measuring technology is used. Measuring logs are created on request.We are well known as a problem solver for difficult and challenging customer requests and we are always open to new challenges!

Präzisions-Entwicklung DENZ GmbHOtto-Hahn-Str. 12-14

85521 Ottobrunn/MunichPhone +49 89 629866 0Fax +49 89 629 866 20www.denz-deniz.com

[email protected]

www.denz-deniz.com [email protected] phone +49 89629866-0

3927.01.2020 13:06

We look forward to your visit!

NOTES

www.denz-deniz.com [email protected] phone +49 89629866-0

40