Download - 4/3-way servo solenoid directional RE 29088/01.16 oil · For information regarding the available spare parts see: 4/3-way servo solenoid directional 1/18 control valves, pilot operated,

Transcript
Page 1: 4/3-way servo solenoid directional RE 29088/01.16 oil · For information regarding the available spare parts see: 4/3-way servo solenoid directional 1/18 control valves, pilot operated,

For information regarding the available spare parts see: www.boschrexroth.com/spc

1/184/3-way servo solenoid directional control valves, pilot operated,with electrical position feedback and on-board electronics (OBE)Type 4WRLE 10...35, symbols V/V1

Sizes (NG) 10, 16, 25, 27, 35Unit series 3XMaximum working pressure P, A, B 350 bar (NG27: 280 bar)Nominal flow 40…1000 l/min (Δp = 10 bar)

RE 29088/01.16Replaces: 10.10

List of contents

Contents PageFeatures 1Ordering data 2Symbols 3Testing and service equipment 3Function, sectional diagram 4Control oil supply 5Technical data 6 and 7Electric connection 8Technical notes on the cable 8On-board electronics 9 and 10Characteristic curves 11 and 12Unit dimensions 13 to 16

Features

– Pilot operated 4/3-way servo solenoid directional control valves NG10 to NG35

– Pilot valve NG6, with control piston and sleeve in servo quality, actuated on one side, 4/4 fail-safe position when switched off

– Control solenoid with electric position feedback and on-board electronics (OBE), calibrated at the factory

– Main stage in servo quality with position feedback– Flow characteristic

• M = Progressive with fine metering notch • P = Non-linear curve • L = Linear

– Electrical connection 6P+PE Signal input of differential amplifier with interface A1 ±10 V, or interface F1 4...20 mA (Rsh = 200 Ω)

Type 4WRLE 10...35

InhaltList of contents 1Features 1Ordering data 2Symbols 3Testing and service equipment 3Function, sectional diagram 4Control oil supply 5Technical data 6Technical data 7Electric connection 8Technical notes on the cable 8On-board electronics 9On-board electronics 10Characteristic curves (measured with HLP 46, oil = 40 °C ±5 °C) 11Characteristic curves (measured with HLP 46, oil = 40 °C ±5 °C) 12Unit dimensions NG10 (dimensions in mm) 13Unit dimensions NG16 (dimensions in mm) 14Unit dimensions NG25/27 (dimensions in mm) 15Unit dimensions NG35 (dimensions in mm) 16Notes 17Notes 18Notes 19Notes 20

Page 2: 4/3-way servo solenoid directional RE 29088/01.16 oil · For information regarding the available spare parts see: 4/3-way servo solenoid directional 1/18 control valves, pilot operated,

a 0 b

A B

P T

2/18 Bosch Rexroth AG Hydraulics 4WRLE 10...35 RE 29088/01.16

Ordering data

With on-board electronics = ESizes = 10 = 16 = 25 = 27 1) = 35 2)

Control spool symbols

4/3-way version

= V, V1 With V1: P → A: qV B → T: qV/2 P → B: qV/2 A → T: qV

Nominal flow rate at 10 bar valve pressure difference (5 bar per metering notch)NG10 40 l/min 3) = 40 55 l/min 4) = 55 70 l/min 3) = 70 85 l/min 4) = 85NG16 90 l/min 3) = 90 120 l/min 4) = 120 150 l/min 3) = 150 200 l/min 4) = 200NG25 300 l/min 3) = 300 370 l/min 4) = 370NG27 430 l/min 1) 4) = 430 NG35 1000 l/min 2) 4) = 1000

Further information in plain text

Seal material M = NBR seals,

suitable for mineral oils (HL, HLP) to DIN 51524

Interface for trigger electronics

A1 = Setpoint input ±10 V F1 = Setpoint input 4…20 mA

Electrical connection K0 = without plug-in connector,

with plug to DIN 43563-AM6

Order plug-in connector separatelyControl oil inlet “x”

control oil return “y”No desig. = “x” = external “y” = external E = “x” = internal “y” = external ET = “x” = internal “y” = internal T = “x” = external “y” = internal

Power supply of trigger electronics G24 = +24 V DC

3X = Unit series 30 to 39 (installation and connection dimensions unchanged)

Flow characteristicM = Progressive with linear fine metering P = Non-linear curve, linear (kink at 40 %) L = Linear

1) NG27 is a high-flow version of NG25, ports P, A, B and T have ∅ 32 mm in the main stage. Contrary to standard ISO 4401-08-08-0-05, ports P, A, B and T may be drilled to max. ∅ 30 mm in the control block. These valves therefore offer higher flow rates qVA : qVB

2) NG35 is a high-flow version of NG32, ports P, A, B and T have ∅ 50 mm in the main stage. Contrary to standard ISO 4401-10-09-0-05, ports P, A, B and T may be drilled to max. ∅ 48 mm in the control block. These valves therefore offer higher flow rates qVA : qVB

3) qVN: Flow characteristic “P”4) qVN: Flow characteristic “M” or “L”

4WRL E 3X G24 K0 M *

Page 3: 4/3-way servo solenoid directional RE 29088/01.16 oil · For information regarding the available spare parts see: 4/3-way servo solenoid directional 1/18 control valves, pilot operated,

Hydraulics Bosch Rexroth AGRE 29088/01.16 4WRLE 10...35 3/18

Symbols

a 0 bA B

P TM: Progressive with fine metering P: Non-linear, linear (40 %) L: Linear

20%

20%

∆s

qV

40%

40%∆s

qV

∆s

qV

Testing and service equipment– Service case type VT-VETSY-1 with test device, see data sheet 29685– Measuring adapter 6P+PE type VT-PA-2, see data sheet 30068

Page 4: 4/3-way servo solenoid directional RE 29088/01.16 oil · For information regarding the available spare parts see: 4/3-way servo solenoid directional 1/18 control valves, pilot operated,

1

T

A P B

X Y

2

3

4/18 Bosch Rexroth AG Hydraulics 4WRLE 10...35 RE 29088/01.16

Function, sectional diagram

Construction The valve consists of three main assemblies:– Pilot valve (1) with control spool and sleeve, return springs,

control solenoid and inductive position transducer– Main stage (2) with centering springs and position feedback– On-board trigger electronics (3)

Power failureIn the event of a power failure or an open circuit, the on-board electronics cut off the electricity to the control solenoid and the pilot spool moves to the fail-safe position, relieving the control oil chambers of the main stage. The main stage control spool is held by springs in the offset position.

Functional descriptionWhen the control solenoid is not actuated, the control spool is held by springs in the fail-safe position, and the main stage spool remains in spring-centered offset position at 1…6 % of the stroke in the direction P-B/A-T.In the on-board electronics, the pre-defined setpoint is compared with the actual value for the position of the main stage control spool. In the event of an error signal, the control solenoid is actuated, and the pilot spool is moved as the magnetic force changes. The flow released through the control cross-sections causes the main control spool to move. The stroke/control cross-section of the main control spool is controlled proportionately to the setpoint. If the input setpoint is 0 V, the electronics move the main stage control spool to mid position. The control oil is conveyed to the pilot valve either internally via port P or externally via port X. The oil returns to the tank internally via port T or externally via port Y.

1 Pilot valve2 Main stage3 Trigger electronics

Page 5: 4/3-way servo solenoid directional RE 29088/01.16 oil · For information regarding the available spare parts see: 4/3-way servo solenoid directional 1/18 control valves, pilot operated,

X Y

Pv Tv

P T

Y X

PvTv

P

A B

P T

A B

P T

A B

P T

A B

P TT

Y X

X

Y

G G

b

G

b

G

b

G G

b

a

a

a

a

G

G

P T

TP

A

A

B

B

Ta b

P

A B

0a b

G

G

XP Y T

Hydraulics Bosch Rexroth AGRE 29088/01.16 4WRLE 10...35 5/18

Control oil supply

ImportantHydraulic symbols are largely derived from the symbols of the switching valves. 4/3-way servo solenoid directional control valves (pilot operated) do not have a closed mid position when switched off! They only perform their function in an active, closed control loop, even if the pilot valve features a fail-safe 4th position. See technical data for details on “switch-off behavior”.

NG10, 25, 27, 35 NG16

Type...–3X...

Type...–3X...E...

Type...–3X...ET...

Type...–3X...T...

No designation = “x” = external “y” = externalE = “x” = internal “y” = externalET = “x” = internal “y” = internalT = “x” = external “y” = internal

The pilot valve can be supplied both via ports X and Y (externally) and via the main flow channels P and T.

Symbol in detail (external control oil inlet and outlet)

Main valve

Pilot valve

Page 6: 4/3-way servo solenoid directional RE 29088/01.16 oil · For information regarding the available spare parts see: 4/3-way servo solenoid directional 1/18 control valves, pilot operated,

6/18 Bosch Rexroth AG Hydraulics 4WRLE 10...35 RE 29088/01.16

Technical data

GeneralConstruction Spool type valve, pilot operatedActuation Servo solenoid directional control valve NG6 OBE, with position controller

for pilot valve and main stageType of mounting Subplate, mounting hole configuration NG10...35 to ISO 4401-...Installation position OptionalAmbient temperature range °C –20...+50Weight kg NG10 8.7 NG16 10.6 NG25 18.4 NG27 18.4 NG35 81Vibration resistance, test condition Max. 25 g, shaken in 3 dimensions (24 h)

Static/DynamicHysteresis % < 0.1, scarcely measurableManufacturing tolerance for Qmax % ≦ 10Response time for signal change (at X = 100 bar)

0...100 % 25 26 32 32 900...10 % 14 15 18 18 40

Response time for signal change (at X = 10 bar)

0...100 % 85 80 120 120 3500...10 % 50 30 50 50 150

Switch-off behavior After electrical switch-off: Pilot valve in fail-safe Main stage moves to spring-centered “offset position”: 1…6% P-B/A-T

Thermal drift Zero point displacement < 1 % at ΔT = 40 °CZero adjustment Factory-set ±1 %

1) The purity classes stated for the components must be complied with in hydraulic systems. Effective filtration prevents problems and also extends the service life of components. For a selection of filters, see www.boschrexroth.com/filter.

2) Flow rate at a different Δp qVx = qVnom • ∆px 5

Hydraulic (measured with HLP 46, oil = 40 °C ±5 °C)Pressure fluid Hydraulic oil to DIN 51524…535, other fluids after prior consultationViscosity range recommended mm2/s 20...100

max. permitted mm2/s 10...800Pressure fluid temperature range °C –20...+70Maximum permissible degree of contamination of pressure fluid Purity class to ISO 4406 (c)

Class 18/16/13 1)

Flow direction See symbol

Nominal flow at Δp = 5 bar per notch 2) l/min

NG10 NG16 NG25 NG27 NG3540 55 70 85 90 120 150 200 300 370 430 1000

Max. working pres sure

Ports P, A, B External control oil inlet bar 350 350 350 280 350Ports P, A, B Internal control oil inlet bar

250

Ports T, X, Y bar 250Min. control oil pressure in “pilot stage” bar

10

qVmax l/min 170 450 900 1000 3500qVN pilot valve l/min 4 12 24 24 40Zero flow of pilot valve at 100 bar cm3/min

< 180

< 300

< 500

< 500

< 900

Zero flow of main stage at 100 bar cm3/min

< 400

< 600

< 1000

< 1000

< 1000

< 6000

Page 7: 4/3-way servo solenoid directional RE 29088/01.16 oil · For information regarding the available spare parts see: 4/3-way servo solenoid directional 1/18 control valves, pilot operated,

Volt tomA

Logic1 or 2Stage

P-B

4...12...20 mA

4...20 mA4...20 mA

P-A

Stroke

II sign.

Stroke

II sign.

NG6/10

Mainstage

24 V =

10 V

–10 V… 0… +10 V

LVDT Sign.

Logic1 or 2Stage

P-B

P-A

Stroke

II sign.

Stroke

II sign.

NG6/10

Mainstage

24 V =0... 10 V0... 10 V

10 V 10 V

Hydraulics Bosch Rexroth AGRE 29088/01.16 4WRLE 10...35 7/18

Technical data

Electric pilot valve NG6, trigger electronics integrated in the valveCyclic duration factor % 100 EDDegree of protection IP 65 to DIN 40050 and IEC 14434/5Connection Plug-in connector 6P+PE, DIN 43563Power supplyTerminal A:Terminal B: 0 V

24 V DCnommin. 21 V DC/max. 40 V DCRipple max. 2 V DC

Max. power consumption 40 VAExternal fuse 2,5 AF

Input, “Standard” version Terminal D: UETerminal E:

Differential amplifier, Ri = 100 kΩ 0... ±10 V 0 V

Input, “mA signal” version Terminal D: ID–ETerminal E: ID–E

Burden, Rsh = 200 Ω 4...(12)...20 mA Current loop ID–E feedback

Max. differential input voltage at 0 V

D → B E → B

max. 18 V DC

Test signal, “Standard” version Terminal F: UTestTerminal C:

LVDT 0...±10 V Reference 0 V

Test signal, “mA signal” version Terminal F: IF–CTerminal C: IF–C

LVDT signal 4...20 mA at external load 200...500 Ω max. 4...20 mA output Current loop IF–C feedback

Protective conductor and screen See pin assignment (CE-compliant installation)Calibration Calibrated at the factory, see valve characteristic curveElectromagnetic compatibility tested according to

EN 61000-6-2: 2005-08 EN 61000-6-3: 2007-01

Version A1: Standard Version F1: mA signal

ImportantPilot operated 4/3-way servo solenoid directional control valves only perform their function in an active closed control loop and do not have a fail-safe position when switched off. For this reason, many applications require the use of “external check valves”, which must be taken into account during the On/Off switching sequence.

SignalSignalSupplySupply

LVDT signal

LVDT signal

DC/DC LVDT signal: ±10 V

DC/DC LVDT signal: ±10 V

Page 8: 4/3-way servo solenoid directional RE 29088/01.16 oil · For information regarding the available spare parts see: 4/3-way servo solenoid directional 1/18 control valves, pilot operated,

1

24 V=

3

4

5

A P B T

62

8/18 Bosch Rexroth AG Hydraulics 4WRLE 10...35 RE 29088/01.16

Electric connectionFor electrical data, see page 7

1 Control 2 Provided by customer 3 Plug-in connector 4 Valve 5 Connecting surface 6 Provided by Rexroth

Technical notes on the cable

Version: – Multi-wire cable Note Voltage supply 24 V DCnom., if voltage drops below 18 V DC, rapid shutdown resembling “Enable OFF” takes place internally. In addition, with the “mA signal” version: ID–E ≧ 3 mA – valve is active ID–E ≦ 2 mA – valve is deactivated.Electrical signals emitted via the trigger electronics (e.g. actual values) must not be used to shut down safety- relevant machine functions!(See European Standard, “Technical Safety Requirements for Fluid-Powered Systems and Components – Hydraulics”, EN 982.)

– Extra-finely stranded wire to VDE 0295, Class 6

– Protective conductor, green/yellow– Cu braided screen

Types: – e.g. Ölflex-FD 855 CP (from Lappkabel company)

No. of wires: – Determined by type of valve, plug types and signal assignment

Cable Ø: – 0.75 mm2 to 20 m length 1.0 mm2 to 40 m length

Outside Ø: – 9.4...11.8 mm – Pg11 12.7...13.5 mm – Pg16

Page 9: 4/3-way servo solenoid directional RE 29088/01.16 oil · For information regarding the available spare parts see: 4/3-way servo solenoid directional 1/18 control valves, pilot operated,

ABC

F

+24 V=

0 V

10k

100k100k

DC

DC

PID+–PD

+–

1 –15 V=

2 ref. 0

3 +15 V=

4

DE UD–E

2.5 AF

+UB

+UB

+15 V– 15 V

0… 10 V+–

0… 10 V+–

0… 10 V+–

s

U

s

U

A +24 V =+24 V =

B0 V

10 V

C 0 V

0 V

D

E

F

10 V

SL

0 V UE

UB

100 k

100 k

10 k

Hydraulics Bosch Rexroth AGRE 29088/01.16 4WRLE 10...35 9/18

On-board electronicsBlock diagram/pin assignmentVersion A1: UD–E ±10 V

Pin assignment 6P+PEVersion A1: UD–E ±10 V (Ri = 100 kΩ)

Logics

Signal

Main stage

Pilot stage

4/3-way servo solenoid directional control valve

Differential amplifier

Power supplySupply zeroReference zero*

Setpoint

Actual value

Protective conductor Screen

* Do not connect to supply zero!

Signal

4/3-way servo solenoid

directional control valve

UD–E 0...+10 V

A B

P T

UD–E 0 V

A B

P T

UD–E 0...–10 V

A B

P T

Test(Signal)

(Signal)

Protective conductor

0 V internal (reference zero)

Differential amplifier

LVDT signal

Valve

Page 10: 4/3-way servo solenoid directional RE 29088/01.16 oil · For information regarding the available spare parts see: 4/3-way servo solenoid directional 1/18 control valves, pilot operated,

PID+–PD

+–

U

s

U

s

+–0… 10 V

4…20 mAID–E

IF–C 4…20 mA

IF–C

+24 V =

0 V+UB

+UB

+15 V– 15 V

ABCDC

DCE

Rsh200 V

4…20 mAmA

V

F

D

1 –15 V=

2 ref. 0

3 +15 V=

4

2.5 AF

A +24 V =+24 V =

B 0 V0 V

C

D

E

F

SL

OUT

IN

SL

10 V

4…20 mA

I = 4…20 mA

Rsh =200 V

UB

10/18 Bosch Rexroth AG Hydraulics 4WRLE 10...35 RE 29088/01.16

On-board electronicsBlock diagram/pin assignmentVersion F1: ID–E 4...12...20 mA

Pin assignment 6P+PEVersion F1: ID–E 4...12...20 mA (Rsh = 200 Ω)

Rsh = 200 Ω (max. 500 Ω)

Power supply

Supply zero

Loop

Test

Protective conductor

Screen

Logics

Signal

Main stage

Pilot stage

4/3-way servo solenoid directional control valve

Differential amplifier

Signal

4/3-way servo solenoid

directional control valve

ID–E 12...20 mA

A B

P T

ID–E 12 mA

A B

P T

ID–E 4...–12 mA

A B

P TID–E ≦ 2 mA: valve inactive

Test

Protective conductor

Voltage LVDT signal

Valve

Page 11: 4/3-way servo solenoid directional RE 29088/01.16 oil · For information regarding the available spare parts see: 4/3-way servo solenoid directional 1/18 control valves, pilot operated,

A B

P T X

G G

Y

UEab

DpA

pP

B

100

80

60

40

20

–20

–40

–60

–80

–100

–4 –3 –2 –1 1 2 3 4

DpB A (%pP)

DpB A (%pP)

UD–E (%)UD–E (%)

100

60

80

40

20

-20

-60

-40

-80

-100

-10UD–E (V)

I D–E (mA)

-UD–E (V)

off 2 mA 4 12 20

-8 -6 -4 -22 4 6 8 10

1%

P-AB-T(1:1)

B-T(2:1)

qV (%)

qV (%)

I D–E (mA)

-UD–E (V)UD–E (V)

-20

-60

-40

-80

-100

-10

10% qVN

10% qVN-8 -6 -4

2 4 6 8 10-2

100

60

80

40

20

P-AB-T(1:1)

B-T(2:1)

off 2 mA 4 12 20

qV (%)

qV (%)

UD–E (V)

I D–E (mA)

-UD–E (V)

20

100

60

80

40

20

-20

-60

-40

-80

-100

-10

off 2 mA 4 12

-8 -6 -4 -22 4 6 8 10

P-AB-T(1:1)

B-T(2:1)

qV (%)

qV (%)

Hydraulics Bosch Rexroth AGRE 29088/01.16 4WRLE 10...35 11/18

Characteristic curves (measured with HLP 46, oil = 40 °C ±5 °C)Flow rate – signal function qV = f (UD–E)

qV = f (ID–E)

Pressure gain

Calibrated ±1 %

Flow characteristic M Flow characteristic P

Flow characteristic L

Version Version

Version

Page 12: 4/3-way servo solenoid directional RE 29088/01.16 oil · For information regarding the available spare parts see: 4/3-way servo solenoid directional 1/18 control valves, pilot operated,

f (Hz)10 20 40 60 80 100 200 3000 20 40 60 80

–10–8–6–4

100 120 140

–202

160 180

1

200

pS = 100 bar

100%

5%

w

AB

dB 1

00%

5%

f (Hz)10 20 40 60 80 100 200 3000 20 40 60 80

–10–8–6–4

100 120 140

–202

160 180

1

200

pS = 100 bar

100%

5%

w

AB

dB

100

% 5%

f (Hz)10 20 40 60 80 100 200 3000 20 40 60 80

–10–8–6–4

100 120 140

–202

160 180

1

200

100%

5%

AB

dB

100

%

5%

pS = 100 bar w

f (Hz)10 20 40 60 80 100 200 3000 20 40 60 80

–10–8–6–4

100 120 140

–202

160 180

1

200 100%

5%

AB

dB

100%

5%

pS = 100 bar w

12/18 Bosch Rexroth AG Hydraulics 4WRLE 10...35 RE 29088/01.16

Characteristic curves (measured with HLP 46, oil = 40 °C ±5 °C)Bode diagram

NG10 NG16

NG25/27 NG35

Amplitude

Amplitude

Amplitude

Amplitude

Phase

Phase

Phase

Phase

Page 13: 4/3-way servo solenoid directional RE 29088/01.16 oil · For information regarding the available spare parts see: 4/3-way servo solenoid directional 1/18 control valves, pilot operated,

T TA P BX Y

77

5 8 7 6 4

167

210 41

3

10281

49

3933

ø6,6

30

70

8

5

197

105

46

1 2 9

24

10

72

P

T T1A B

F2F1

X Y

F3F4

25

13

104

0,01/100

Rzmax 4

Hydraulics Bosch Rexroth AGRE 29088/01.16 4WRLE 10...35 13/18

Unit dimensions NG10 (dimensions in mm)

1 Pilot valve2 O-ring 9.25 x 1.78 (ports P, A, B, T)3 On-board electronics4 Main valve5 Inductive position transducer (main valve)6 Nameplate7 O-ring 12 x 2 (ports P, A, B, T, T1)8 O-ring 10 x 2 (ports X, Y)9 Plug-in connector not included in delivery,

see data sheet 08008 (order separately)

10 Machined valve contact surface, mounting hole configuration according to ISO 4401-05-05-0-05

Deviates from standard: Ports P, A, B, T, T1 ∅ 10.5 mm Minimum thread depth: Ferrous metal 1.5 x ∅

Non-ferrous 2 x ∅Subplates, see data sheet 45054 (order separately)Valve fastening bolts (order separately) The following valve fastening bolts are recommended:4 cheese-head bolts ISO 4762-M6x40-10.9-N67F821 70 (galvanized in accordance with Bosch standard N67F821 70)Tightening torque MA = 11+3 NmMaterial no. 2910151209

Required surface quality of valve mounting face

Page 14: 4/3-way servo solenoid directional RE 29088/01.16 oil · For information regarding the available spare parts see: 4/3-way servo solenoid directional 1/18 control valves, pilot operated,

77

5 8 7 6 4

225

302

150

A B Y

9549

35

30

25

34

ø3 3

94

210

3

17

212

119

46

1 2 9

10

96

A B

T P

Y

X

F3F6G2F4

F2

G1

F1

F5

26

13

1520,01/100

Rzmax 4

14/18 Bosch Rexroth AG Hydraulics 4WRLE 10...35 RE 29088/01.16

Unit dimensions NG16 (dimensions in mm)

1 Pilot valve2 O-ring 9.25 x 1.78 (ports P, A, B, T)3 On-board electronics4 Main valve5 Inductive position transducer (main valve)6 Nameplate7 O-ring 23 x 2.5 (ports P, A, B, T)8 O-ring 9 x 2 (ports X, Y)9 Plug-in connector not included in delivery,

see data sheet 08008 (order separately)

10 Machined valve contact surface, mounting hole configuration according to ISO 4401-07-07-0-05

Deviates from standard: Ports P, A, B, T ∅ 20 mm Minimum thread depth: Ferrous metal 1.5 x ∅

Non-ferrous 2 x ∅Subplates, see data sheet 45057 (order separately)Valve fastening bolts (order separately) The following valve fastening bolts are recommended:2 cheese-head bolts ISO 4762-M6x45-10.9-N67F821 70 (galvanized in accordance with Bosch standard N67F821 70) Tightening torque MA = 11+3 NmMaterial no. 2910151211 4 cheese-head bolts ISO 4762-M10x50-10.9-N67F821 70 (galvanized in accordance with Bosch standard N67F821 70) Tightening torque MA = 50+10 NmMaterial no. 2910151301

Required surface quality of valve mounting face

Page 15: 4/3-way servo solenoid directional RE 29088/01.16 oil · For information regarding the available spare parts see: 4/3-way servo solenoid directional 1/18 control valves, pilot operated,

210

3

64

242

149

46

1 2 9

77

5 8 7 6 4

305382

190

A BX

125

4945

5718

ø13

43

ø66

118

10

118

A BX

T P Y

F3F6G2F4

F2

G1

F1

F5

20

13

194

0,01/100

Rzmax 4

Hydraulics Bosch Rexroth AGRE 29088/01.16 4WRLE 10...35 15/18

Unit dimensions NG25/27 (dimensions in mm)

1 Pilot valve2 O-ring 9.25 x 1.78 (ports P, A, B, T)3 On-board electronics4 Main valve5 Inductive position transducer (main valve)6 Nameplate7 O-ring (ports P, A, B, T)

NG25: 28 x 3 NG27: 34.6 x 2.62

8 O-ring 15 x 2.5 (ports X, Y)9 Plug-in connector not included in delivery,

see data sheet 08008 (order separately)

10 Machined valve contact surface, mounting hole configuration according to ISO 4401-08-08-0-05

Deviates from standard: NG25: Ports P, A, B, T ∅ 25 mm NG27: Ports P, A, B, T ∅ 32 mm Minimum thread depth: Ferrous metal 1.5 x ∅

Non-ferrous 2 x ∅Subplates, see data sheet 45059 (order separately)Valve fastening bolts (order separately) The following valve fastening bolts are recommended:6 cheese-head bolts ISO 4762-M12x60-10.9-N67F821 70 (galvanized in accordance with Bosch standard N67F821 70) Tightening torque NG25 MA = 90+30 Nm,

NG27 MA = 90±15 NmMaterial no. 2910151354

Required surface quality of valve mounting face

Page 16: 4/3-way servo solenoid directional RE 29088/01.16 oil · For information regarding the available spare parts see: 4/3-way servo solenoid directional 1/18 control valves, pilot operated,

77

5 8 7 6 4

461320

A BX

4929

90

69

60

5

200

225

370

ø6

ø21

210

360

1 2 9

43,2

10

203

A BX

T P Y

F3F6G2

F4

F2G1

F1 F5

45

22

324

0,01/100

Rzmax 4

16/18 Bosch Rexroth AG Hydraulics 4WRLE 10...35 RE 29088/01.16

Unit dimensions NG35 (dimensions in mm)

Required surface quality of valve mounting face

1 Pilot valve2 O-ring 9.25 x 1.78 (ports P, A, B, T)3 On-board electronics4 Main valve5 Inductive position transducer (main valve)6 Nameplate7 O-ring 53.57 x 3.53 (ports P, A, B, T)8 O-ring 15 x 2.5 (ports X, Y)9 Plug-in connector not included in delivery,

see data sheet 08008 (order separately)

10 Machined valve contact surface, mounting hole configuration according to ISO 4401-10-09-0-05

Deviates from standard: Ports P, A, B, T ∅ 48 mm Minimum thread depth: Ferrous metal 1.5 x ∅

Non-ferrous 2 x ∅Subplates, see data sheet 45060 (order separately)Valve fastening bolts (order separately) The following valve fastening bolts are recommended:6 cheese-head bolts ISO 4762-M20x90-10.9-N67F821 70 (galvanized in accordance with Bosch standard N67F821 70) Tightening torque MA = 450+110 NmMaterial no. 2910151532

Page 17: 4/3-way servo solenoid directional RE 29088/01.16 oil · For information regarding the available spare parts see: 4/3-way servo solenoid directional 1/18 control valves, pilot operated,

Hydraulics Bosch Rexroth AGRE 29088/01.16 4WRLE 10...35 17/18

Notes

Page 18: 4/3-way servo solenoid directional RE 29088/01.16 oil · For information regarding the available spare parts see: 4/3-way servo solenoid directional 1/18 control valves, pilot operated,

18/18 Bosch Rexroth AG Hydraulics 4WRLE 10...35 RE 29088/01.16

Bosch Rexroth AG HydraulicsZum Eisengießer 197816 Lohr am Main, Germany Telefon +49 (0) 93 52 / 18-0 Telefax +49 (0) 93 52 / 18-23 [email protected] www.boschrexroth.de

© This document, as well as the data, specifications and other information set forth in it, are the exclusive property of Bosch Rexroth AG. It may not be reproduced or given to third parties without its consent.The data specified above only serve to describe the product. No state- ments concerning a certain condition or suitability for a certain application can be derived from our information. The information given does not release the user from the obligation of own judgment and verification. It must be remembered that our products are subject to a natural process of wear and aging.

Notes

Page 19: 4/3-way servo solenoid directional RE 29088/01.16 oil · For information regarding the available spare parts see: 4/3-way servo solenoid directional 1/18 control valves, pilot operated,

Hydraulics Bosch Rexroth AGRE 29088/01.16 4WRLE 10...35

Bosch Rexroth AG HydraulicsZum Eisengießer 197816 Lohr am Main, Germany Telefon +49 (0) 93 52 / 18-0 Telefax +49 (0) 93 52 / 18-23 [email protected] www.boschrexroth.de

© This document, as well as the data, specifications and other information set forth in it, are the exclusive property of Bosch Rexroth AG. It may not be reproduced or given to third parties without its consent.The data specified above only serve to describe the product. No state- ments concerning a certain condition or suitability for a certain application can be derived from our information. The information given does not release the user from the obligation of own judgment and verification. It must be remembered that our products are subject to a natural process of wear and aging.

Notes

Page 20: 4/3-way servo solenoid directional RE 29088/01.16 oil · For information regarding the available spare parts see: 4/3-way servo solenoid directional 1/18 control valves, pilot operated,

4WRLE 10...35 RE 29088/01.16

Bosch Rexroth AG HydraulicsZum Eisengießer 197816 Lohr am Main, Germany Telefon +49 (0) 93 52 / 18-0 Telefax +49 (0) 93 52 / 18-23 [email protected] www.boschrexroth.de

© This document, as well as the data, specifications and other information set forth in it, are the exclusive property of Bosch Rexroth AG. It may not be reproduced or given to third parties without its consent.The data specified above only serve to describe the product. No state- ments concerning a certain condition or suitability for a certain application can be derived from our information. The information given does not release the user from the obligation of own judgment and verification. It must be remembered that our products are subject to a natural process of wear and aging.

Bosch Rexroth AG Hydraulics

Notes