![[T2RE] rules EL reprint 2015 TTR2 europe rules EN · Οι γκρι διαδρομές μπορούν να κλείσουν με ένα σετ ομοίων ... Μην ξεχνάτε](https://static.fdocument.org/doc/165x107/5f9cf751a63f0d1bd71c4e21/t2re-rules-el-reprint-2015-ttr2-europe-rules-en-.jpg)
γλώσσες
Σελίδες
Νομικός
Λευκωσία, 7 Ιουνίου 2017
ΠΡΟΣ: Όλα τα Μέλη Κυρία/ε, Σας επισυνάπτουμε γνωστοποιήσεις από Εθνικούς Οργανισμούς Τυποποίησης, μελών των Ευρωπαϊκών Οργανισμών Τυποποίησης CEN/CENELEC, που περιέχουν τους τίτλους προτεινόμενων εθνικών προτύπων. Σύμφωνα με την Ευρωπαϊκή Οδηγία που αφορά την πληροφόρηση σε θέματα τεχνικών προτύπων, μπορείτε, αφού μελετήσετε τους τίτλους: α) να ζητήσετε όπως λάβετε ηλεκτρονικά ολόκληρο το κείμενο του προσχεδίου εθνικού προτύπου, εάν αυτό είναι διαθέσιμο, β) να συμμετάσχετε στις συναντήσεις της τεχνικής επιτροπής του Εθνικού Οργανισμού Τυποποίησης που ετοιμάζει το προσχέδιο προτύπου και γ) να υποβάλετε εισήγηση στον CYS, να αρχίσει τυποποιητική εργασία σε Ευρωπαϊκό επίπεδο σχετικά με το θέμα της γνωστοποίησης, εάν φυσικά πιστεύετε ότι το εν λόγω εθνικό πρότυπο θα επηρεάσει την ελεύθερη διακίνηση προϊόντων ή την κυπριακή βιομηχανία και οικονομία. Τυχόν σχόλια και παρατηρήσεις παρακαλώ όπως υποβάλλονται στον Κυπριακό Οργανισμό Τυποποίησης. Σε περίπτωση που δεν υπάρξει οποιαδήποτε ανταπόκριση, ο CYS δε θα φέρει ένσταση στην προώθηση των υπό αναφορά εθνικών προτύπων. Για περισσότερες πληροφορίες μπορείτε να επικοινωνείτε με την κα. Μαριλένα Νικολάου, Λειτουργό Διοίκησης και Διεθνών Σχέσεων του Κυπριακού Οργανισμού Τυποποίησης (CYS), τηλ: 22 411439, Φαξ. 22 411511 και στην ηλεκτρονική διεύθυνση: [email protected] Με εκτίμηση, Ανδρέας Ανδρέου, Διευθυντής Βιομηχανίας, για Γενικό Γραμματέα. /ΜΚ.
Γρίβα Διγενή 38 & Δεληγιώργη 3, 1066 , Τ.Θ. 21455, 1509 Λευκωσία, Κύπρος, Τηλ. + 357-22889860, Φαξ. + 357-22665685, E-mail: [email protected], Ιστοσελίδα:www.ccci.org.cy
Information procedure Page 1
Monthly Notifications Register
Notifications registered at CCMC from 2017-05-01 to 2017-05-31
Register issued on : 2017-06-02
A list of subsectors can be found at the end of this document.
Information procedure Page 2
Monthly Notifications Register
Notifications registered at CCMC from 2017-05-01 to 2017-05-31
Sector A : SERVICES
Register issued on : 2017-06-02
Page 3Subsector A02: CLEANING SERVICES
Subsector : A02 Registration Date : 2017-05-12Organization : LVS Draft Issue Date : 2017-05-15Country : Latvia Latest Date for Comments : 2017-07-14
Project ID : 00058754/0001 Project Established
ICS : 03.080.10National Ref : prLVS 1051Title : Cleaningquality–Measuringsystemfor
assessment and rating of cleaning qualityScope : This standard describes a system for establishing and assessing cleaning quality.
Relatedness :National : New
** End of Subsector **
Subsector A06: BUILDING AND CONSTRUCTION SERVICES
Subsector : A06 Registration Date : 2017-05-19Organization : SIS Draft Issue Date : 2018-04-01Country : Sweden Latest Date for Comments : 2017-07-19
Project ID : 00101991/0001 Project Established
ICS :National Ref : 914221Title : Building design - Housing - Interior dimensionsScope : The standard provides the basis for designing appropriately designed, equipped and
accessible housing for the required furniture, furnishings and equipment and service areas. It also provides measurement data for doorways and passageways.
Relatedness :National : New
** End of Subsector **
Subsector A11: SAFETY AND SECURITY
Subsector : A11 Registration Date : 2017-05-23Organization : ISSCountry : Serbia Latest Date for Comments : 2017-07-24
Project ID : 00059350/0001 Draft for public enquiry
ICS : 03.100.01National Ref : SRPS A.L2.003Title : Security and resilience - Risk assessment
Relatedness :National : New
Subsector : A11 Registration Date : 2017-05-29Organization : TSECountry : Turkey
Project ID : t1012255/0001 Project Established
Page 4
ICS : 03.080.30, 91.140.90National Ref :Title : Competent services – Lift maintenance services - RulesScope : This standard includes rules for operating, structural feature, technical equipment, personnel
specifications and certification of competent services of lifts, escalators and passengers conveyors.
Relatedness :National : New
Subsector : A11 Registration Date : 2017-05-29Organization : TSECountry : Turkey
Project ID : t1013769/0001 Project Established
ICS : 03.080National Ref :Title : Work places - Rules for manufacturing, modifying and mounting places of road vehiclesScope : This standard includes rules for management, physical characteristics, technical equipment
and personnel of working places for manufacture, modify and install workplaces of road vehicles.
Relatedness :National : New
Subsector : A11 Registration Date : 2017-05-29Organization : TSECountry : Turkey
Project ID : t12664-1/0001 Project Established
ICS :03.080.30, 23.020.20, 43.060.40
National Ref :Title : Places for converting of propulsion system of road vehicles to using liquefied petroleum
gas (LPG) - General rulesScope : This standard includes rules for physical characteristics, technical equipment and personnel
of services for converting of propulsion system of road vehicles to using liquefied petroleum gas (LPG)
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 5
Monthly Notifications Register
Notifications registered at CCMC from 2017-05-01 to 2017-05-31
Sector B : BUILDING AND CONSTRUCTION
Register issued on : 2017-06-02
Page 6Subsector B01: FIRE PROTECTION
Subsector : B01 Registration Date : 2017-05-19Organization : DINCountry : Germany
Project ID : 03101102/0001 Project Established
ICS : 13.220.20National Ref : DIN 14675-1Title : Fire detection and fire alarm systems - Part 1: Design and operation
Relatedness :National : New
Subsector : B01 Registration Date : 2017-05-19Organization : DINCountry : Germany
Project ID : 03101103/0001 Project Established
ICS : 13.220.20National Ref : DIN 14675-2Title : Fire detection and fire alarm systems - Part 2: Requirements to the specialised company
Relatedness :National : New
Subsector : B01 Registration Date : 2017-05-19Organization : DINCountry : Germany
Project ID : 03101104/0001 Project Established
ICS : 13.220.99National Ref : DIN 14677-2Title : Maintenance of electrically controlled hold-open systems for fire and smoke door
assemblies as well as for electrically controlled hold-open systems for fire barriers in the course of ground-bound conveying systems - Part 2: Requirements to the specialised company
Relatedness :National : New
Subsector : B01 Registration Date : 2017-05-19Organization : DINCountry : Germany
Project ID : 03101105/0001 Project Established
ICS : 13.220.99National Ref : DIN 14677-1Title : Maintenance of electrically controlled hold-open systems for fire and smoke door
assemblies as well as for electrically controlled hold-open systems for fire barriers in the course of ground-bound conveying systems - Part 1: Maintenance measures
Relatedness :National : New
Page 7
Subsector : B01 Registration Date : 2017-05-08Organization : NENCountry : Netherlands
Project ID : 50002027/0001 Project Established
ICS : 13.220.50, 91.060.10National Ref : NEN 6060:2017/A1 Concept nlTitle : Fire safety of large fire compartmentsScope : The draft amendment contains a new annex J concerning fire safety of cowsheds
Relatedness :National : New
Subsector : B01 Registration Date : 2017-05-08Organization : NENCountry : Netherlands
Project ID : 50002028/0001 Project Established
ICS : 13.220.50, 91.060.10National Ref : NEN 6079+C1:2016/A1:2017 Concept nlTitle : Fire safety of larger fire compartments - Risk approachScope : NEN 6079+C1:2016/A1:2017 contains two new annexes I and J.
Relatedness :National : New
Subsector : B01 Registration Date : 2017-05-11Organization : SNV Draft Issue Date : 2017-05-04Country : Switzerland Latest Date for Comments : 2017-08-08
Project ID : CH170009/0001 Draft for public enquiry
ICS : 13.220.10National Ref : prSN 54002Title : Fire alarm systems -Control and signaling board for firefighters (FBA)
Relatedness :National : New
Subsector : B01 Registration Date : 2017-05-17Organization : UNECountry : Spain Latest Date for Comments : 2017-06-15
Project ID : P0041431/0002 Draft for public enquiry
ICS :National Ref : PNE 23510Title : Fire extinguishing systems in commercial kitchens - Design and test requirements.Scope : The purpose and scope of this standard is to establish the minimum requirements that apply
to the design, installation, operation, testing and maintenance of automatic fixed fire-extinguishing systems for the protection of commercial kitchens.
Page 8
The protection includes both kitchen appliances such as the hood, plenum and extraction ducts. Household kitchens or industrial food production equipment are not covered by this standard. However, under certain analogy conditions it could be used as a reference. Likewise, the extinguishing tests are incorporated to verify their effectiveness in type homes that determine the limits of application of the system.
Relatedness :National : New
** End of Subsector **
Subsector B02: STRUCTURES
Subsector : B02 Registration Date : 2017-05-22Organization : ASICountry : Austria
Project ID : 00027138/0001 Project Established
ICS : 91.010.30, 93.040National Ref : ÖNORM B 1991-2Title : Eurocode 1 - Actions on structures - Part 2: Traffic loads on bridges - National
specifications concerning ÖNORM EN 1991-2 and national supplementsScope : This Austrian Standard specifies national parameters for traffic loads on bridges to ÖNORM
EN 19912 and shall be applied jointly with ÖNORM EN 1991-2 in Austria.
Relatedness :National : New
Subsector : B02 Registration Date : 2017-05-15Organization : BASCountry : Bosnia and Herzegovina
Project ID : 00076425/0001 Project Established
ICS : 91.010.30National Ref : prBAS EN 1991-1-3/NATitle : Eurocode 1: Actions on structures - Part 1-3: General actions - Snow loads - National
annexScope : This document defines nationally determined parameters for the clauses of the standard
BAS EN 1991-1-3:2015 for which national choice is allowed and applied together with that standard.
Relatedness :National : New
Subsector : B02 Registration Date : 2017-05-15Organization : BASCountry : Bosnia and Herzegovina
Project ID : 00076426/0001 Project Established
ICS : 91.010.30National Ref : prBAS EN 1991-1-4/NA
Page 9
Title : Eurocode 1: Actions on structures: Part 1-4: General actions - Wind actions - National annex
Scope : This document defines nationally determined parameters for the clauses of the standard BAS EN 1991-1-4:2015 for which national choice is allowed and applied together with that standard.
Relatedness :National : New
Subsector : B02 Registration Date : 2017-05-15Organization : BASCountry : Bosnia and Herzegovina
Project ID : 00082263/0001 Project Established
ICS : 91.010.30National Ref : prBAS EN 1998-1/NATitle : Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules,
seismic actions and rules for buildings - National annexScope : This document defines nationally determined parameters for the clauses of the standard
BAS EN 1998-1:2017 for which national choice is allowed and applied together with that standard.
Relatedness :National : New
** End of Subsector **
Subsector B03: CONCRETE
Subsector : B03 Registration Date : 2017-05-29Organization : UNICountry : Italy
Project ID : 01603149/0001 Project Established
ICS : 91.100.30National Ref : UNI1603149Title : Testing hardened concrete - Determination of water absorption at atmospheric pressure Scope : The standard describes the method for the determination of water absorption at
atmospheric pressure of hardened concrete specimens.
Relatedness :National : REV/AMD UNI 7699:2005
** End of Subsector **
Subsector B07: GLASS
Subsector : B07 Registration Date : 2017-05-22Organization : ASICountry : Austria
Project ID : 00027141/0001 Project Established
ICS : 81.040.20, 91.100.50National Ref : ÖNORM B 3722Title : Glass in building - Requirements for sealings of rebates and glazing systems
Page 10
Scope : This Austrian Standard specifies requirements for the sealing of rebates and glazing systems in windows, doors and fixed frames using sealants. Special applications such as glass under water pressure, fire resisting doorsets with fire resisting glass infill and the like are not covered by this Standard.
Relatedness :National : New
** End of Subsector **
Subsector B08: DOORS AND WINDOWS
Subsector : B08 Registration Date : 2017-05-30Organization : AFNORCountry : France
Project ID : 00203309/0001 Project Established
ICS :National Ref : NF P23-308Title : External joinery ¿ Composite works with wood element ¿ Technical specifications for the
connexion with the wood elements
Relatedness :National : New
** End of Subsector **
Subsector B13: SOLAR ENERGY
Subsector : B13 Registration Date : 2017-05-22Organization : ASICountry : Austria
Project ID : 00027143/0001 Project Established
ICS : 27.160National Ref : ÖNORM H 7701Title : Thermal Solar Systems - Approximation method for the dimensioning of flat collectors in
domestic hot water systemsScope : This ÖNORM contains an approximation procedure for the calculation of the collector
surface area of flat collectors in thermal solar systems for hot water production. The simplified assessment procedure of this ÖNORM can be applied to systems with the following boundary conditions: - Plants with a gross collector area up to 20 m² - Plants which are mainly used for water heating - Plants without significant south-weakening of the orientation of the collectors
Relatedness :National : New
Subsector : B13 Registration Date : 2017-05-17Organization : UNECountry : Spain Latest Date for Comments : 2017-06-25
Project ID : P0048067/0001 Draft for public enquiry
ICS :
Page 11
National Ref : PNE 206014Title : Tests for the determination of the solar field efficiency of solar thermal power plants with
parabolic trough collector technologyScope : The purpose of this standard is to provide the procedures and guidelines for conducting
performance tests in the solar field of CCP-based solar thermal plants in order to determine their performance with the possible lowest level of uncertainty. This standard establishes the appropriate instrumentation and measurement techniques for the determination of the following parameters required to know the solar field efficiency: • Useful/available radiant solar energy • The net thermal energy of the solar field. This standard is applicable to solar fields of any size solar thermal power plants using CCP type concentrating systems, with the sun being the main source of energy, and having operative all the elements and systems of the part being tested.
Relatedness :National : New
** End of Subsector **
Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT
Subsector : B25 Registration Date : 2017-05-05Organization : EVSCountry : Estonia
Project ID : 00094927/0001 Project Established
ICS : 23.040.01, 75.060, 75.200National Ref : prEVS 884Title : Natural gas pipeline systems - Pipelines for maximum operating pressure over 16 bar -
General requirements for designScope : This standard establishes design requirements for steel gas pipelines with operating pressure
over 16 bar to assure the reliability of usage, safety, protection of environment and prevention of accidents.
Relatedness :National : New
Subsector : B25 Registration Date : 2017-05-17Organization : UNECountry : Spain Latest Date for Comments : 2017-06-25
Project ID : P0047622/0001 Draft for public enquiry
ICS :National Ref : PNE 60630Title : Design, construction, assembly and operation of LPG filling stations for gas-engine
vehicles.Scope : This standard establishes those technical requirements and minimum safety measures that
must be implemented during design, construction, assembly and operation of LPG filling stations for gas-engine vehicles, which are not considered in the European standards EN 14678-1 and EN 14678-2.
Relatedness :National : REV/AMD UNE 60630:2011
** End of Subsector **
Page 12Subsector B26: ROAD BUILDING AND MAINTENANCE
Subsector : B26 Registration Date : 2017-05-30Organization : AFNORCountry : France
Project ID : 00203308/0001 Project Established
ICS :National Ref : PR NF P98-086Title : Road pavement structural design ¿ Application to new pavement
Relatedness :National : New
Subsector : B26 Registration Date : 2017-05-11Organization : SNV Draft Issue Date : 2017-05-03Country : Switzerland Latest Date for Comments : 2017-06-14
Project ID : CH170008/0001 Draft for public enquiry
ICS : 93.080.01National Ref : prSN 640811Title : Project management; Control of road projects
Relatedness :National : New
** End of Subsector **
Subsector B27: WATERPROOFING MATERIALS
Subsector : B27 Registration Date : 2017-05-17Organization : UNECountry : Spain Latest Date for Comments : 2017-06-15
Project ID : P0044402/0002 Draft for public enquiry
ICS :National Ref : PNE 41811Title : Criterio on roofing intervention.Scope : Determine the procedures to be followed in the repair and maintenance of roof enclosure
systems following the guidelines established in UNE 41805-9 IN, Building diagnosis - Part 9 - Pathological study of the building - Roofings.
Relatedness :National : New
** End of Subsector **
Subsector B29: AGGREGATES
Subsector : B29 Registration Date : 2017-05-22Organization : ASICountry : Austria
Project ID : 00027139/0001 Project Established
ICS : 91.100.15
Page 13
National Ref : ÖNORM B 3129Title : Natural stones - Specific values for selectionScope : This ÖNORM contains information on the most important technical properties of aggregates
and solid rock, but not of rock in the sense of a vug body group. The values serve to compare the technical lithic characteristics and the selection to the given requirements. The specified bandwidths for the individual properties are values frequently used by tests. Deviations from these bandwidths are by unweathered rock material mostly because of a special formation of the relevant rock (eg mineral grain size), and do not necessarily mean the unfitness of this rock. Clause 5 contains the test procedure for the determination of these values. The respective requirements for the rocks can be found in the relevant standards.
Relatedness :National : New
Subsector : B29 Registration Date : 2017-05-22Organization : ASICountry : Austria
Project ID : 00027140/0001 Project Established
ICS : 91.100.15National Ref : ÖNORM B 3136Title : Lightweight aggregates - Rules for the implementation of ÖNORM EN 13055Scope : This ÖNORM specifies based on the specific geographic, topographic and climatic conditions
in Austria selected requirements complying with the categories of ÖNORM EN 13055. The ÖNORM shall be applied jointly with the ÖNORM EN 13055.
Relatedness :National : New
** End of Subsector **
Subsector B31: HEATING SYSTEMS IN BUILDINGS
Subsector : B31 Registration Date : 2017-05-17Organization : EVSCountry : Estonia
Project ID : 00095074/0001 Project Established
ICS : 91.140.30National Ref : prEVS 906Title : Ventilation for non-residential buildings - Performance requirements for ventilation and
room-conditioning systems. Estonian National Annex for prEN 16798-3Scope : Estonian National Annex for prEN 16798-3
Relatedness :National : New
** End of Subsector **
Subsector B99: UNDETERMINED
Subsector : B99 Registration Date : 2017-05-19Organization : DINCountry : Germany
Page 14
Project ID : 00516973/0001 Project Established
ICS : 65.020.40National Ref : DIN 18915Title : Vegetation technology in landscaping - Soil working
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 15
Monthly Notifications Register
Notifications registered at CCMC from 2017-05-01 to 2017-05-31
Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS
Register issued on : 2017-06-02
Page 16Subsector C01: Food products
Subsector : C01 Registration Date : 2017-05-02Organization : TSECountry : Turkey
Project ID : t1005389/0001 Project Established
ICS : 67.140.20National Ref :Title : Instant Coffee Scope : This standard applies to powdered and granulated coffee which is produced by drying the
extract which is produced with fresh roasted and milled coffee.
Relatedness :National : New
Subsector : C01 Registration Date : 2017-05-02Organization : TSECountry : Turkey
Project ID : t1005670/0001 Project Established
ICS : 67.120.30National Ref :Title : Canned Craw Fish (Frozen)Scope : This standard applies to canned craw fish (frozen) ıt does not apply to craw fish which is
ready to serve.
Relatedness :National : New
Subsector : C01 Registration Date : 2017-05-02Organization : TSECountry : Turkey
Project ID : t1009052/0001 Project Established
ICS : 67.060National Ref :Title : Rusk- For Military UsesScope : T This standard applies to rusk which is used for military uses.
Relatedness :National : New
Subsector : C01 Registration Date : 2017-05-02Organization : TSECountry : Turkey
Project ID : t1009779/0001 Project Established
ICS : 67.060National Ref :Title : Edible Soya Bean FlourScope : This standard applies to edible soya bean flour It does not apply to soya bean flour which is
used for animal feed or other purposes.
Page 17
Relatedness :National : New
Subsector : C01 Registration Date : 2017-05-29Organization : TSECountry : Turkey
Project ID : t1011044/0001 Project Established
ICS : 67.100.10National Ref :Title : Ewe milk-RawScope : Ewe milk-Raw
Relatedness :National : New
Subsector : C01 Registration Date : 2017-05-29Organization : TSECountry : Turkey
Project ID : t1011045/0001 Project Established
ICS : 67.100.10National Ref :Title : Water Buffalo Milk- RawScope : Water Buffalo Milk- Raw
Relatedness :National : New
Subsector : C01 Registration Date : 2017-05-29Organization : TSECountry : Turkey
Project ID : t1011046/0001 Project Established
ICS : 67.100.10National Ref :Title : Gaot milk- RawScope : Gaot milk- Raw
Relatedness :National : New
Subsector : C01 Registration Date : 2017-05-02Organization : TSECountry : Turkey
Project ID : t1011983/0001 Project Established
ICS : 67.100.10National Ref :Title : Baby food I – Infant formula Scope : This standard covers the baby food I-infant formula for the baby which is 4-6 month old. It
Page 18
does not cover the additional baby food and special baby food.
Relatedness :National : New
Subsector : C01 Registration Date : 2017-05-02Organization : TSECountry : Turkey
Project ID : t1013412/0001 Project Established
ICS : 67.060National Ref :Title : Wheat flour fortified with iron Scope : This standard specifies the requirements for iron fortified wheat flour and do not include
other types of wheat flour.
Relatedness :National : New
Subsector : C01 Registration Date : 2017-05-02Organization : TSECountry : Turkey
Project ID : t1013424/0001 Project Established
ICS : 67.220.10National Ref :Title : Flavor adjuvants Scope : This standard specifies all sorts of flavor adjuvants which mixed meat and meat products,
types of salad and foods. It does not specify bouillon, fluid and semi fluid sauces.
Relatedness :National : New
Subsector : C01 Registration Date : 2017-05-02Organization : TSECountry : Turkey
Project ID : t1013717/0001 Project Established
ICS : 67.080.10National Ref :Title : Pekmez (Made From Carob)Scope : This standard covers the pekmez made from carob . It doesnot cover pekmez which is made
from other fruits.
Relatedness :National : New
Subsector : C01 Registration Date : 2017-05-29Organization : TSECountry : Turkey
Project ID : t2001018/0001 Project Established
Page 19
ICS : 67.100.10National Ref :Title : Cow milk- RawScope : Cow milk- Raw
Relatedness :National : New
Subsector : C01 Registration Date : 2017-05-02Organization : TSECountry : Turkey
Project ID : t2005669/0001 Project Established
ICS : 67.120.30National Ref :Title : Canned Snail (Frozen) Scope : This standard applies to canned snail. ıt does not apply to canned snail which is ready to
serve.
Relatedness :National : New
Subsector : C01 Registration Date : 2017-05-02Organization : TSECountry : Turkey
Project ID : t3000353/0001 Project Established
ICS : 67.120.30National Ref :Title : Canned fish Scope : This standard, covers canned fish. This standard does not specify salted, smoked and
deepfrozen fish.
Relatedness :National : New
Subsector : C01 Registration Date : 2017-05-29Organization : TSECountry : Turkey
Project ID : t3002665/0001 Project Established
ICS : 67.080.20National Ref :Title : Canned dry beans with vegetable oil - Ready to serve Scope : This standard comprise canned stewed white beans with vegetable oil-ready to serve.
Relatedness :National : New
Subsector : C01 Registration Date : 2017-05-02Organization : TSECountry : Turkey
Page 20
Project ID : t3003190/0001 Project Established
ICS : 67.080.20National Ref :Title : Dry Soup MixScope : This standard specifies the requirements for dry soup mix. It does not cover instant soup
which is a kind of dry soup mix.
Relatedness :National : New
Subsector : C01 Registration Date : 2017-05-02Organization : TSECountry : Turkey
Project ID : tst00933/0001 Project Established
ICS : 67.220.20National Ref :Title : Edible salt Scope : This standard covers edible salt
Relatedness :National : New
Subsector : C01 Registration Date : 2017-05-02Organization : TSECountry : Turkey
Project ID : tst04500/0002 Project Established
ICS : 67.060National Ref :Title : Wheat FlourScope : This standard specifies by indivicually wheat floor which is prepared or mixing of triticum
aestivum, triticum compactum and tritium drum wheat.
Relatedness :National : New
Subsector : C01 Registration Date : 2017-05-02Organization : TSECountry : Turkey
Project ID : tst07800/0001 Project Established
ICS : 67.140.30National Ref :Title : ChocolateScope : This standard specifies chocolate.
Relatedness :National : New
Subsector : C01 Registration Date : 2017-05-02
Page 21
Organization : TSECountry : Turkey
Project ID : tst09130/0001 Project Established
ICS : 13.060.10National Ref :Title : Natural mineral water Scope : This standard comprise natural mineral water. It doesn't comprise the water with medical
aim and medicine property, the water which is for treatment in welded joint, the thermal and water with mineral foundation , and the other drinking water.
Relatedness :National : New
** End of Subsector **
Subsector C02: PAINTS AND RELATED PRODUCTS
Subsector : C02 Registration Date : 2017-05-19Organization : DINCountry : Germany
Project ID : 02500804/0001 Project Established
ICS : 17.180.20National Ref : DIN 5033-9Title : Colorimetry - Part 9: Reflectance standard for calibration in colorimetry and photometry
Relatedness :National : New
** End of Subsector **
Subsector C03: CHEMISTRY
Subsector : C03 Registration Date : 2017-05-17Organization : UNECountry : Spain Latest Date for Comments : 2017-06-25
Project ID : P0047180/0001 Draft for public enquiry
ICS :National Ref : PNE 84765Title : Cosmetic raw materials. Plant extracts. Thyme hydroglycolic extract (Thymus vulgaris L.)Scope : This standard defines the specifications required to thyme hydroglycolic extract for use in
cosmetics
Relatedness :National : REV/AMD UNE 84765:2010
Subsector : C03 Registration Date : 2017-05-17Organization : UNECountry : Spain Latest Date for Comments : 2017-06-25
Project ID : P0047610/0001 Draft for public enquiry
ICS :National Ref : PNE 84697
Page 22
Title : Cosmetic raw materials. Sunscreens. Benzoic acid, 2-[4-(diethylamino)-2-hidroxybenzoyl]-hexylester. Determination of the purity by gas chromatography.
Scope : This standard defines the procedure for the determination of benzoic acid, 2-[-4-diethyllamino)-2-hydroxybenzoyl]-, hexylester by gas chromatography for use in cosmetics
Relatedness :National : REV/AMD UNE 84697:2006
Subsector : C03 Registration Date : 2017-05-17Organization : UNECountry : Spain Latest Date for Comments : 2017-06-25
Project ID : P0047861/0001 Draft for public enquiry
ICS :National Ref : PNE 84693Title : Cosmetic raw materials. Sunscreens. Disodium salt of 2-2'-(1,4-phenylene)-bis-1H-
benzimidazole-4,6-disulphonic acidScope : This standard defines the physicochemical characteristics of the disodium salt of 2-2'-(1,4-
phenylene)-bis-1H-benzimidazole-4,6-disulphonic acid for use in cosmetics
Relatedness :National : REV/AMD UNE 84693:2006
Subsector : C03 Registration Date : 2017-05-17Organization : UNECountry : Spain Latest Date for Comments : 2017-06-25
Project ID : P0047862/0001 Draft for public enquiry
ICS :National Ref : PNE 84694Title : Cosmetic raw materials. Sunscreens. Disodium salt of 2-2'-(1,4-phenylene)-bis-1H-
benzimidazole-4,6-disulphonic acid. Determination of purity by liquid chromatographyScope : This standard defines the test method for determining the purity of the disodium salt of
2-2'-(1,4-phenylene)-bis-1H-benzimidazole-4,6-disulphonic acid.
Relatedness :National : REV/AMD UNE 84694:2006
** End of Subsector **
Subsector C06: ESSENTIAL OILS
Subsector : C06 Registration Date : 2017-05-17Organization : UNECountry : Spain Latest Date for Comments : 2017-06-25
Project ID : P0047178/0001 Draft for public enquiry
ICS :National Ref : PNE 84677Title : Cosmetic raw materials. Plant extracts. Asian centella hydroglycolic extract (Centella
asiatica L.)Scope : This standard defines the specifications required to Asian centella hydroglycolic extract for
use in cosmetics
Relatedness :
Page 23
National : REV/AMD UNE 84677:2009
Subsector : C06 Registration Date : 2017-05-17Organization : UNECountry : Spain Latest Date for Comments : 2017-06-25
Project ID : P0047179/0001 Draft for public enquiry
ICS :National Ref : PNE 84678Title : Cosmetic raw materials. Plant extracts. Olive leaves hydroglycolic extract (Olea europaea
L.).Scope : This standard defines the specifications required to olive leaves hydroglycolic extract for use
in cosmetics
Relatedness :National : REV/AMD UNE 84678:2008
Subsector : C06 Registration Date : 2017-05-17Organization : UNECountry : Spain Latest Date for Comments : 2017-06-25
Project ID : P0047613/0001 Draft for public enquiry
ICS :National Ref : PNE 84676Title : Cosmetic raw materials. Plant extracts. Grape seeds powder extract (Vitis vinifera L.)Scope : This standard defines the specifications required to grape seeds powder extract for use in
cosmetics
Relatedness :National : REV/AMD UNE 84676:2008
** End of Subsector **
Subsector C13: FERTILIZERS
Subsector : C13 Registration Date : 2017-05-02Organization : TSECountry : Turkey
Project ID : t0114517/0001 Project Established
ICS : 71.060.01National Ref :Title : Disodium octaborate tetrahydrate - Used in fertilizer industryScope : This standard specifies disodium octoborate tetrahydrate used in fertilize industry
Relatedness :National : New
** End of Subsector **
Subsector C19: CHEMICAL ANALYSIS
Subsector : C19 Registration Date : 2017-05-25Organization : ISS
Page 24
Country : Serbia Latest Date for Comments : 2017-07-24
Project ID : 00056840/0001 Draft for public enquiry
ICS :National Ref : nkSRPS C.A1.096:2017Title : Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis Scope : This guide is an introduction to mathematical procedures for correction of interelement
(matrix) effects in quantitative X-ray spectrometric analysis. The procedures described correct only for the interelement effect(s) arising from a homogeneous chemical composition of the specimen. Effects related to either particle size, or mineralogical or metallurgical phases in a specimen are not treated. These procedures apply to both wavelength and energy-dispersive X-ray spectrometry where the specimen is considered to be infinitely thick, flat, and homogeneous with respect to the depth of penetration of the exciting X rays.
Relatedness :National : New
Subsector : C19 Registration Date : 2017-05-25Organization : ISSCountry : Serbia Latest Date for Comments : 2017-07-24
Project ID : 00056847/0001 Draft for public enquiry
ICS :National Ref : nkSRPS C.A1.097:2017Title : Standard Guide for Elemental Analysis by Wavelength Dispersive X-Ray Fluorescence
SpectrometryScope : This guide provides guidelines for developing and describing analytical procedures using a
wavelength dispersive X-ray spectrometer for elemental analysis of solid metals, ores, and related materials.. The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
Relatedness :National : New
Subsector : C19 Registration Date : 2017-05-25Organization : ISSCountry : Serbia Latest Date for Comments : 2017-07-24
Project ID : 00056848/0001 Draft for public enquiry
ICS :National Ref : nkSRPS C.A1.098:2017Title : Standard Guide for Specifying the Chemical Compositions and Selecting Sampling
Practices and Quantitative Analysis Methods for Metals, Ores, and Related Materials Scope : This guide covers procedures for specifying compositional requirements and identifying
appropriate sampling and quantitative analysis test methods to be referenced in product specification standards for metals, ores, and related materials.
Relatedness :National : New
** End of Subsector **
Subsector C20: EXPLOSIVES AND FIREWORKS
Page 25
Subsector : C20 Registration Date : 2017-05-29Organization : TSECountry : Turkey
Project ID : t0116031/0001 Project Established
ICS : 71.100.30, 95.020National Ref :Title : Mine action - Mechanical deminingScope : This standard provides specifications and guidelines for mechanical demining operations.
Relatedness :National : New
Subsector : C20 Registration Date : 2017-05-29Organization : TSECountry : Turkey
Project ID : t0116032/0001 Project Established
ICS : 71.100.30, 95.020National Ref :Title : Mine action - Guide to occupational health and general dog careScope : This standard provides guidelines for occupational health and general dog care.
Relatedness :National : New
** End of Subsector **
Subsector C21: COSMETICS
Subsector : C21 Registration Date : 2017-05-17Organization : UNECountry : Spain Latest Date for Comments : 2017-06-25
Project ID : P0044476/0002 Draft for public enquiry
ICS :National Ref : PNE 84763Title : Cosmetic raw materials. Plant extracts. Purified extract of Asian centella (Centella
asiatica L.)Scope : This standard includes the specifications required by the Purified extract of Asian centella, in
cosmetic uses.
Relatedness :National : New
** End of Subsector **
Subsector C99: UNDETERMINED
Subsector : C99 Registration Date : 2017-05-09Organization : EVSCountry : Estonia
Project ID : 00095071/0001 Project Established
ICS : 67.060, 67.240
Page 26
National Ref : EVS 677:2014/prA1Title : Cereals and cereal products - Determination of organoleptic propertiesScope : Amendment to EVS 677:2014. This Estonian standard specifies the methods of determining
the odour and colour in cereals and cereal products; determining the taste in flour, semolina and foodbran (including crunch), and cooking-quality of buckwheat groats and oat flakes.
Relatedness :National : New
Subsector : C99 Registration Date : 2017-05-09Organization : EVSCountry : Estonia
Project ID : 00095072/0001 Project Established
ICS : 67.060National Ref : EVS 679:2014/prA1Title : Cereals - Determination of insect infestationScope : Amendment to EVS 679:2014. This Estonian standard specifies the methods of determining
the visible and hidden insect infestation in cereals.
Relatedness :National : New
Subsector : C99 Registration Date : 2017-05-30Organization : AFNORCountry : France
Project ID : 00203130/0001 Project Established
ICS :National Ref : PR NF T90-455/A1Title : Water quality - Sampling and/or enumeration of Cryptosporidium oocystes and Giardia
cysts - Concentration and enumeration method
Relatedness :National : New
Subsector : C99 Registration Date : 2017-05-29Organization : UNICountry : Italy
Project ID : 01603052/0001 Project Established
ICS : 67.200.10, 75.160.20National Ref : UNI1603052Title : Liquid biofuels. Animal and vegetable oils and fats and their intermediates and derivates
and recycled used cooking oils used as fuels for energy production or biodiesel production.Specificationsandclassificationforenergyuse
Scope : The standard defines classification and specifications of animal and vegetable oils and fats and their intermediates and derivates and recycled used cooking oils used as fuels for energy production or as raw material for biodiesel production. Intermediates (Glycerine) of Fatty Acids Methyl Ester (FAME) are within the scope of this standard. Fatty Acids Methyl Ester (FAME) is out of the scope of this standard as defined by EN 14214. Classification and specifications here defined are addressed only to animal and vegetable oils and fats and their intermediate and derivates and recycled used cooking oils used as fuels for thermal
Page 27
and electric energy production or for biodiesel production. No other use has been taken into account (e.g automotive).
Relatedness :National : REV/AMD UNI/TS 11163:2009
** End of Subsector **
** End of Sector **
Information procedure Page 28
Monthly Notifications Register
Notifications registered at CCMC from 2017-05-01 to 2017-05-31
Sector F : FUNDAMENTAL STANDARDS
Register issued on : 2017-06-02
Page 29Subsector F01: TECHNICAL DRAWINGS
Subsector : F01 Registration Date : 2017-05-18Organization : SIS Draft Issue Date : 2017-05-18Country : Sweden Latest Date for Comments : 2017-07-18
Project ID : 00032207/0001 Project Established
ICS : 01.100.30National Ref : 32207Title : Construction and facilities management documentation – Layout and content of title blockScope : This Swedish standard specifies the layout and content of title blocks for different purposes
within the design, construction and facilities management process. It applies to building construction as well as civil engineering, and the title blocks are applicable for drawings as well as for text documents, e.g. specifications. The properties to be used within the title block are defined, in compliance with ISO 7200.
Relatedness :National : New
Subsector : F01 Registration Date : 2017-05-18Organization : SIS Draft Issue Date : 2017-05-18Country : Sweden Latest Date for Comments : 2017-07-18
Project ID : 00032209/0001 Project Established
ICS :National Ref : 322079Title : Construction and facilities management documentation – Indication of documentation
type and reviewScope : This Swedish standard specifies steps in the review and approval process, and values for
those steps to be used in title blocks and management documentation. The standard also specifies documentation types in the design, construction and facilities management process, for the same purposes.
Relatedness :National : New
** End of Subsector **
Subsector F10: STATISTICS
Subsector : F10 Registration Date : 2017-05-25Organization : ISSCountry : Serbia Latest Date for Comments : 2017-07-24
Project ID : 00056779/0001 Draft for public enquiry
ICS :National Ref : nkSRPS C.A1.091:2017Title : Standard Practice for Dealing With Outlying Observations Scope : This practice covers outlying observations in samples and how to test the statistical
significance of them. An outlying observation, or outlier, is one that appears to deviate markedly from other members of the sample in which it occurs. In this connection, the following two alternatives are of interest: (i) an outlying observation may be merely an extreme manifestation of the random variability inherent in the data. If this is true, the value should be retained and processed in the same manner as the other observations in the sample. (ii) An outlying observation may be the result of gross deviation from prescribed
Page 30
experimental procedure or an error in calculating or recording the numerical value. In such cases, it may be desirable to institute an investigation to ascertain the reason for the aberrant value. The observation may even actually be rejected as a result of the investigation, though not necessarily so. At any rate, in subsequent data analysis, the outlier or outliers will be recognized as probably being from a different population than that of the other sample values. Recommended criteria and illustrations for single samples including the Dixon criteria which are based entirely on ratios of differences between the observations, criterion using independent standard deviation, and criterion for known standard deviation are presented.
Relatedness :National : New
** End of Subsector **
Subsector F16: GRAPHICAL SYMBOLS
Subsector : F16 Registration Date : 2017-05-29Organization : UNICountry : Italy
Project ID : 01603081/0001 Project Established
ICS :01.080.10, 45.100, 97.220.20
National Ref : UNI1603081Title : Signs for rope-ways and areas for skiing, mountain leisure activities and sports -
CharacteristicsScope : The standard specifies the characteristics of signs for rope ways and areas for skiing,
mountain leisure activities and sports
Relatedness :National : REV/AMD UNI 8132:2002
Subsector : F16 Registration Date : 2017-05-29Organization : UNICountry : Italy
Project ID : 01603082/0001 Project Established
ICS :01.080.10, 45.100, 97.220.20
National Ref : UNI1603082Title : Signs for rope-ways and areas for skiing, mountain leisure activities and sports –
Symbols for information signsScope : The standard specifies symbols for information signs for rope ways and areas for skiing,
mountain leisure activities and sports
Relatedness :
National :
REV/AMD UNI 8133-18:2003;UNI 8133-20:2004;UNI 8133-8:1985;UNI 8133-5:1985;UNI 8133-9:2003;UNI 8133-4:1985;UNI 8133-10:1995;UNI 8133-3:1985;UNI 8133-2:1989;UNI 8133-15:2001;UNI 8133-13:1989;UNI 8133-16:2001;UNI 8133-14:2001;UNI 8133-12:1989;UNI 8133-17:2003;UNI 8133-1:1985;UNI 8133-19:2003
Subsector : F16 Registration Date : 2017-05-29Organization : UNI
Page 31
Country : Italy
Project ID : 01603083/0001 Project Established
ICS :01.080.10, 45.100, 97.220.20
National Ref : UNI1603083Title : Signs for rope-ways and areas for skiing, mountain leisure activities and sports - Symbols
for mandatory signsScope : The standard specifies the symbols for mandatory signs for rope ways and areas for skiing,
mountain leisure activities and sports
Relatedness :
National :
REV/AMD UNI 8134-22:2003;UNI 8134-9:1987;UNI 8134-16:1989;UNI 8134-7:1980;UNI 8134-11:1987;UNI 8134-13:2003;UNI 8134-20:2003;UNI 8134-21:2003;UNI 8134-1:1980;UNI 8134-17:2001;UNI 8134-18:2001;UNI 8134-6:1980;UNI 8134-14:2003;UNI 8134-19:2003;UNI 8134-12:1987;UNI 8134-23:2004;UNI 8134-10:1987;UNI 8134-2:1980
Subsector : F16 Registration Date : 2017-05-29Organization : UNICountry : Italy
Project ID : 01603084/0001 Project Established
ICS :01.080.10, 45.100, 97.220.20
National Ref : UNI1603084Title : Signs for rope-ways and areas for skiing, mountain leisure activities and sports - Symbols
for prohibition signsScope : The standard specifies the symbols for prohibition signs for rope ways and areas for skiing,
mountain leisure activities and sports
Relatedness :
National :REV/AMD UNI 8135-14:2003;UNI 8135-11:2001;UNI 8135-9:2001;UNI 8135-10:1987;UNI 8135-12:2001;UNI 8135-2:2001;UNI 8135-15:2003;UNI 8135-1:2001;UNI 8135-13:2003;UNI 8135-3:2001
Subsector : F16 Registration Date : 2017-05-29Organization : UNICountry : Italy
Project ID : 01603085/0001 Project Established
ICS :01.080.10, 45.100, 97.220.20
National Ref : UNI1603085Title : Signs for rope-ways and areas for skiing, mountain leisure activities and sports - Symbols
for danger signsScope : The standard specifies the symbols for danger signs for rope ways and areas for skiing,
mountain leisure activities and sports
Relatedness :
National :
REV/AMD UNI 8136-8:1992;UNI 8136-15:2004;UNI 8136-14:2004;UNI 8136-13:2004;UNI 8136-12:2004;UNI 8136-11:2004;UNI 8136-10:2004;UNI 8136-9:2004;UNI 8136-1:1980;UNI 8136-3:1980;UNI 8136-5:1980;UNI 8136-6:1980;UNI 8136-7:1995;UNI 8136-2:1980;UNI 8136-4:1980
Page 32
Subsector : F16 Registration Date : 2017-05-29Organization : UNICountry : Italy
Project ID : 01603086/0001 Project Established
ICS :01.080.10, 45.100, 97.220.20
National Ref : UNI1603086Title : Specific signs for ski slopes and skiroutes - CharacteristicsScope : The standard specifies the characteristics of signs for ski slopes and skiroutes
Relatedness :National : REV/AMD UNI 8137:2004
Subsector : F16 Registration Date : 2017-05-29Organization : UNICountry : Italy
Project ID : 01603087/0001 Project Established
ICS :01.080.10, 45.100, 97.220.20
National Ref : UNI1603087Title : Specific signs for cross country tracks - CharacteristicsScope : The standard specifies the characteristics of signs for cross country tracks
Relatedness :National : REV/AMD UNI 8867:2003
** End of Subsector **
** End of Sector **
Information procedure Page 33
Monthly Notifications Register
Notifications registered at CCMC from 2017-05-01 to 2017-05-31
Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE
Register issued on : 2017-06-02
Page 34Subsector H01: CINEMATOGRAPHY
Subsector : H01 Registration Date : 2017-05-22Organization : ASICountry : Austria
Project ID : 00027134/0001 Project Established
ICS : 01.140.20National Ref : ÖNORM A 2658Title : Citations in scientific papers - recommendations for literature and sourcesScope : This ÖNORM provides recommendations for citation and other information resources in
scientific works.
Relatedness :National : New
** End of Subsector **
Subsector H04: SPORTS EQUIPMENT
Subsector : H04 Registration Date : 2017-05-22Organization : ASICountry : Austria
Project ID : 00027145/0001 Project Established
ICS : 13.060.25National Ref : ÖNORM M 6216Title : Swimming and bathing pools - Requirements for pool hydraulics and water treatmentScope : This Austrian Standard specifies regulations for water treatment systems for pool water from
swimming and bathing pools in the sector of baths hygiene law (BHygG) and regulation
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 35
Monthly Notifications Register
Notifications registered at CCMC from 2017-05-01 to 2017-05-31
Sector I : MECHANICAL ENGINEERING
Register issued on : 2017-06-02
Page 36Subsector I01: SCREW THREADS
Subsector : I01 (Secondary Subsector)
Registration Date : 2017-05-02
Organization : TSECountry : Turkey
Project ID : tst05265/0001 Project Established
ICS : 21.040.10, 23.040.40National Ref :Title : Fasteners-Thread Run-Out and Undercut For External and Internal Metric ThreadScope : This standard covers the rules for thread run out and undercut for external and internal
metric thread for fasteners.
Relatedness :National : NewEuropean : Not Equivalent to DIN 76-1:2016
** End of Subsector **
Subsector I13: GAS CONTAINERS
Subsector : I13 Registration Date : 2017-05-30Organization : SIS Draft Issue Date : 2017-05-29Country : Sweden Latest Date for Comments : 2017-07-29
Project ID : 00003639/0001 Project Established
ICS : 23.020.35National Ref : 3639Title : Gas cylinder with siphon tube - markingScope : This standard specifies the marking with a label with text and a metal ring for gas cylinders
equipped with siphon tube
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 37
Monthly Notifications Register
Notifications registered at CCMC from 2017-05-01 to 2017-05-31
Sector M : METALLIC MATERIALS
Register issued on : 2017-06-02
Page 38Subsector M01: STEEL
Subsector : M01 Registration Date : 2017-05-25Organization : ISSCountry : Serbia Latest Date for Comments : 2017-07-24
Project ID : 00056832/0001 Draft for public enquiry
ICS :National Ref : nkSRPS C.A1.092:2017Title : Standard Test Method for Analysis of Low-Alloy Steels and Cast Irons by Wavelength
Dispersive X-Ray Fluorescence SpectrometryScope : This test method covers the X-ray fluorescence spectrometric analysis of low-alloy steels and
cast irons for the following elements in the ranges indicated: manganese 0.20 to 1.50 %; nickel 0.10 to 1.00 %; chromium 0.10 to 1.00 %; molybdenum 0.04 to 0.40 %; copper 0.05 to 0.30 %; vanadium 0.03 to 0.25 %. These mass fraction ranges can be extended by the use of suitable reference materials. The detection limit for the elements is lower than the listed minimum value. The ranges represent the actual levels at which this test method was tested
Relatedness :National : New
Subsector : M01 Registration Date : 2017-05-25Organization : ISSCountry : Serbia Latest Date for Comments : 2017-07-24
Project ID : 00056838/0001 Draft for public enquiry
ICS :National Ref : nkSRPS C.A1.093:2017Title : Standard Test Method for Analysis of Stainless and Alloy Steels by Wavelength
Dispersive X-Ray Fluorescence SpectrometryScope : This test method covers the analysis of stainless and alloy steels by wavelength dispersive X-
ray Fluorescence Spectrometry for the determination of the following elements:Chromium 1,0 to 25,0 %; Cobalt 0,05 to 0,45 %; Copper 0,06 to 3,50 %; Manganese 0,3 to 5,5 %; Molybdenum 0,05 to 3,5 %; Nickel 0,70 to 35,0 %; Niobium 0,06 to 1,3 %; Phosphorus 0,01 to 0,03 %; Silicon 0,2 to 2,0 %; Sulfur 0,02 to 0,35 %; Titanium 0,013 to 0,5 %; Vanadium 0,04 to 0,25 %. NOTE 1— Mass fraction ranges can be extended upward by demonstration of accurate calibrations using suitable reference materials.
Relatedness :National : New
Subsector : M01 Registration Date : 2017-05-25Organization : ISSCountry : Serbia Latest Date for Comments : 2017-07-24
Project ID : 00056839/0001 Draft for public enquiry
ICS :National Ref : nkSRPS C.A1.094:2017Title : Standard Test Method for Analysis of Low-Alloy Steels by Wavelength Dispersive X-Ray
Fluorescence SpectrometryScope : This test method covers the wavelength dispersive X-ray fluorescence analysis of low-alloy
steels for the following elements: Calcium 0.001 to 0.007 %; Chromium 0.04 to 2.5 %; Cobalt 0.03 to 0.2 %; Copper 0.03 to 0.6 %; Manganese 0.04 to 2.5 %; Molybdenum 0.005 to 1.5 %; Nickel 0.04 to 3.0 %; Niobium 0.002 to 0.1 %; Phosphorus 0.010 to 0.08 %; Silicon 0.06 to 1.5 %; Sulfur 0.009 to 0.1 %; Vanadium 0.012 to 0.6 %. Unless exceptions are noted, mass fraction
Page 39
ranges can be extended and additional elements can be included by the use of suitable reference materials and measurement conditions. Deviations from the published scope must be validated by experimental means. See Guide E2857 for information on validation options.
Relatedness :National : New
Subsector : M01 Registration Date : 2017-05-30Organization : AFNORCountry : France
Project ID : 00203239/0001 Project Established
ICS :National Ref : PR XP E29-826Title : Stainless steel pliable corrugated tubing kits in buildings for gas with an operating
pressure up to 2 bar
Relatedness :National : New
Subsector : M01 Registration Date : 2017-05-19Organization : DINCountry : Germany
Project ID : 08201373/0001 Project Established
ICS : 23.040.60National Ref : DIN 3901Title : Non-soldering compression fittings with cutting ring - Double ended stud ends with
parallel thread for stud ends type A
Relatedness :National : New
Subsector : M01 Registration Date : 2017-05-02Organization : TSECountry : Turkey
Project ID : tst05265/0001 Project Established
ICS : 21.040.10, 23.040.40National Ref :Title : Fasteners-Thread Run-Out and Undercut For External and Internal Metric ThreadScope : This standard covers the rules for thread run out and undercut for external and internal
metric thread for fasteners.
Relatedness :National : NewEuropean : Not Equivalent to DIN 76-1:2016
** End of Subsector **
** End of Sector **
Information procedure Page 40
Monthly Notifications Register
Notifications registered at CCMC from 2017-05-01 to 2017-05-31
Sector N : NON-METALLIC MATERIALS
Register issued on : 2017-06-02
Page 41Subsector N05: TEXTILES
Subsector : N05 Registration Date : 2017-05-30Organization : AFNORCountry : France
Project ID : 00203304/0001 Project Established
ICS :National Ref : PR NF G05-003Title : Clothing industry. Representation of machinery and equipment in layout drawings.
Relatedness :National : REV/AMD NF G05-003:196201 (G05-003)
Subsector : N05 Registration Date : 2017-05-19Organization : DINCountry : Germany
Project ID : 06235074/0001 Project Established
ICS : 59.060.20National Ref : DIN 54439Title : Textiles - Methods for the determination of N-N-dimethylacetamide (DMAc) and N,N-
dimethylformamide (DMF) in man-made fibres of polyacrylonitrile, polyurethane and aromatic polyamide fibres
Relatedness :National : New
Subsector : N05 Registration Date : 2017-05-19Organization : DINCountry : Germany
Project ID : 06235114/0001 Project Established
ICS : 59.080.01National Ref : DIN 54015Title : Testing of colour fastness of textiles - Determination of colour fastness of dyeings and
prints to washing in presence of peroxide
Relatedness :National : New
Subsector : N05 Registration Date : 2017-05-19Organization : DINCountry : Germany
Project ID : 06235115/0001 Project Established
ICS : 59.080.01National Ref : DIN 54016Title : Testing of colour fastness of textiles - Determination of colour fastness of dyeings and
prints to washing in presence of hypochlorite
Relatedness :National : New
Page 42
Subsector : N05 Registration Date : 2017-05-29Organization : TSECountry : Turkey
Project ID : tst13730/0001 Project Established
ICS : 97.160National Ref :Title : Textiles - Matress and pillow protector - SpecificationsScope : This standard specifies the description, classification and characteristics, sampling, inspection
and marketing of aleze for mattress and pillow.
Relatedness :National : New
** End of Subsector **
Subsector N09: PLASTICS
Subsector : N09 Registration Date : 2017-05-30Organization : AFNORCountry : France
Project ID : 00203134/0001 Project Established
ICS :National Ref : PR XP T54-180Title : Plastics warning devices for underground cables and pipelines with visual characteristics
¿ Test method of the determination of visual warning characteristics by simulation of trench opening
Relatedness :National : New
** End of Subsector **
Subsector N14: PLASTICS PIPES
Subsector : N14 Registration Date : 2017-05-29Organization : UNICountry : Italy
Project ID : 01603153/0001 Project Established
ICS : 23.040.20, 83.140.30National Ref : UNI1603153Title : Elements of design and techniques for the installation and testing of systems of
polyethylene piping systems for the transport of fluids under pressureScope : This standard defines the design elements and techniques for the installation and testing of
systems of polyethylene pipes for the transport of liquids under pressure. The fields of application of this standard are: - waters intended for human consumption to the point of delivery; - water for irrigation; - water for fire-fighting networks; - waste water (excluding discharges into the sea); - liquids for industrial installations (eg .: artificial snow, cooling systems, washing, etc.)
Relatedness :National : REV/AMD UNI 11149:2005
Page 43** End of Subsector **
** End of Sector **
Information procedure Page 44
Monthly Notifications Register
Notifications registered at CCMC from 2017-05-01 to 2017-05-31
Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT
Register issued on : 2017-06-02
Page 45Subsector S04: PROTECTIVE CLOTHING AND EQUIPMENT
Subsector : S04 Registration Date : 2017-05-09Organization : HZNCountry : Croatia
Project ID : 00556213/0001 Project Established
ICS : 13.340.60National Ref : noHRN 1152Title : Personal protective equipment against falls from height -- Climbing irons for concrete
poles
Relatedness :National : New
Subsector : S04 Registration Date : 2017-05-10Organization : SNCountry : Norway
Project ID : NOT17027/0001 Draft for public enquiry
ICS : 11.140National Ref : NS 3365Title : Health service – Unisex patient underpants in knitted fabricScope : Specifications for unisex patient underpants in knitted fabric
Relatedness :National : New
** End of Subsector **
Subsector S08: AIR QUALITY
Subsector : S08 Registration Date : 2017-05-30Organization : AFNORCountry : France
Project ID : 00203234/0001 Project Established
ICS :National Ref : PR NF X43-215Title : Workplace exposure
Relatedness :National : New
** End of Subsector **
Subsector S09: WATER QUALITY AND WATER SUPPLY
Subsector : S09 Registration Date : 2017-05-22Organization : ASICountry : Austria
Project ID : 00027142/0001 Project Established
ICS :13.060.20, 23.040.01, 91.140.60
National Ref : ÖNORM B 5024-3
Page 46
Title : Evaluation basis for materials in contact with drinking water - Part 3: Metalic materialsScope : This ÖNORM contains the evaluation basis used for metal materials for the hygienic
requirements for materials in contact with water intended for human consumption. This part of the ÖNORM is to be applied to organic materials or of these materials made plant components, as far as they get into contact with drinking water and hot water.
Relatedness :National : New
Subsector : S09 Registration Date : 2017-05-22Organization : ASICountry : Austria
Project ID : 00027144/0001 Project Established
ICS : 13.060.20National Ref : ÖNORM M 5873-3Title : Devices for the disinfection of water using ultraviolet radiation - Part 3: Requirements and
validation of reference radiometersScope : This ÖNORM specifies the requirements and the testing of UV reference radiometers for Hg
low-pressure lamps. These reference radiometers are used for checking device diameters used in the disinfection of drinking water devices. This ÖNORM is intended to ensure that the provisions of the applicable food regulations are complied with in the disinfection of drinking water. This ÖNORM can be applied to UV devices for disinfecting other waters than drinking water.
Relatedness :National : New
Subsector : S09 Registration Date : 2017-05-08Organization : NENCountry : Netherlands
Project ID : 50002029/0001 Project Established
ICS : 13.060.45National Ref : NEN 6600-1:2017 Concept nlTitle : Water - Sampling - Part 1: Waste waterScope : Water - Sampling - Part 1: Waste water
Relatedness :National : New
Subsector : S09 Registration Date : 2017-05-08Organization : NENCountry : Netherlands
Project ID : 50002030/0001 Project Established
ICS : 13.060.45National Ref : NEN 6600-2:2017 Concept nlTitle : Water - Sampling - Part 2: Surface waterScope : Testing water quality by surface water sampling. Various types of surface water are treated in
this standard. The standard is applicable to sampling of surface water for the determination
Page 47
of: metals, inorganic compounds, organic compounds and physical-chemical characteristics and dust particles.
Relatedness :National : New
** End of Subsector **
Subsector S24: SOIL QUALITY
Subsector : S24 Registration Date : 2017-05-30Organization : AFNORCountry : France
Project ID : 00203131/0001 Project Established
ICS :National Ref : PR NF X31-620-3Title : Soil quality - Services related to contaminated sites and soils - Part 3: Requirements in
the field of restoration work engineering services
Relatedness :National : New
** End of Subsector **
Subsector S99: UNDETERMINED
Subsector : S99 Registration Date : 2017-05-24Organization : SNV Draft Issue Date : 2017-05-09Country : Switzerland Latest Date for Comments : 2017-07-10
Project ID : CH170010/0001 Draft for public enquiry
ICS : 93.020National Ref : prSNR 592054Title : Quartz dust in underground construction
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 48
Monthly Notifications Register
Notifications registered at CCMC from 2017-05-01 to 2017-05-31
Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING
Register issued on : 2017-06-02
Page 49Subsector T01: SHIPBUILDING AND MARITIME STRUCTURES
Subsector : T01 Registration Date : 2017-05-19Organization : DINCountry : Germany
Project ID : 13202884/0001 Project Established
ICS : 47.020.30National Ref : DIN 86129Title : Plug screws and flat sealing rings for welded-in screw caps for filling and sounding pipes
Relatedness :National : New
** End of Subsector **
Subsector T02: AEROSPACE
Subsector : T02 Registration Date : 2017-05-19Organization : DINCountry : Germany
Project ID : 13115614/0001 Project Established
ICS : 01.040.49National Ref : DIN 5452-1Title : Unmanned aircraft systems (UAS) - Part 1: Terms and definitions; Text in German and
English
Relatedness :National : New
** End of Subsector **
Subsector T13: LIFTING CHAINS, HOOKS AND ROPES
Subsector : T13 Registration Date : 2017-05-19Organization : DINCountry : Germany
Project ID : 08500163/0001 Project Established
ICS : 53.040.20National Ref : DIN 5694-1Title : Round steel link chains - Round steel link chains, nomial pitch: 5 x d, for the operation in
chain conveyors - Part 1: From stainless steel, grade 3
Relatedness :National : New
** End of Subsector **
Subsector T14: PACKAGING
Subsector : T14 Registration Date : 2017-05-22Organization : ASICountry : Austria
Project ID : 00027135/0001 Project Established
Page 50
ICS : 55.100National Ref : ÖNORM A 5005Title : 1 l multi-way bottle for soft drinks - AF-standard bottleScope : This ÖNORM has to be applied for returnable bottles with a nominal capacity of 1,0 l for
non-alcoholic beverages, fruit juices and non-carbonated and carbonated water. The brimful capacity consider an adequate head space for hot filling and pasteurization.
Relatedness :National : New
Subsector : T14 Registration Date : 2017-05-22Organization : ASICountry : Austria
Project ID : 00027136/0001 Project Established
ICS : 55.100National Ref : ÖNORM A 5006Title : 0,35 l multi-way bottle for soft drinks - AF-standard bottleScope : This ÖNORM has to be applied for returnable bottles with a nominal capacity of 0,35 l for
non-alcoholic beverages, fruit juices and non-carbonated and carbonated water. The brimful capacity consider an adequate head space for hot filling and pasteuisation.
Relatedness :National : New
Subsector : T14 Registration Date : 2017-05-22Organization : ASICountry : Austria
Project ID : 00027137/0001 Project Established
ICS : 55.100National Ref : ÖNORM A 5019Title : 1 l Rhinewine-bottle (hock bottle) - Crown-cork-finishScope : This ÖNORM has to be applied for returnable bottles with a nominal capacity of 1 l which
have been used exclusively for wine. The glass thickness and the format of the push-up is not defined in this ÖNORM.
Relatedness :National : New
** End of Subsector **
Subsector T16: LIFTS & ESCALATORS
Subsector : T16 Registration Date : 2017-05-23Organization : UNMZCountry : Czech Republic
Project ID : 27001217/0001 Project Established
ICS :National Ref :Title : Safety rules for construction and installation of passenger and goods lifts - Essential
changes of lifts
Page 51
Relatedness :National : REV/AMD ČSN 274011 (2004)
Subsector : T16 (Secondary Subsector)
Registration Date : 2017-05-23
Organization : UNMZCountry : Czech Republic
Project ID : 27001217/0001 Project Established
ICS :National Ref :Title : Safety rules for construction and installation of passenger and goods lifts - Essential
changes of lifts
Relatedness :National : REV/AMD ČSN 274011 (2004)
** End of Subsector **
Subsector T19: ROAD SAFETY
Subsector : T19 Registration Date : 2017-05-16Organization : UNMZ Draft Issue Date : 2016-12-30Country : Czech Republic Latest Date for Comments : 2017-04-03
Project ID : 73014416/0001 Project Established
ICS :National Ref :Title : Fixed, vertical road traffic signs – Part 1: Fixed signsScope : The aim of the amendment Z1 is modification of the national annex NA. Use of new
information in this area.
Relatedness :National : REV/AMD Amendment Z1 of ČSN EN 12899-1(2008)
Subsector : T19 Registration Date : 2017-05-16Organization : UNMZ Draft Issue Date : 2017-02-28Country : Czech Republic Latest Date for Comments : 2017-05-30
Project ID : 73014516/0001 Project Established
ICS :National Ref :Title : Fixed, vertical road traffic signs – Part 3: Delineator posts and retroreflectors Scope : The aim of the amendment Z1 is modification of the national annex NA. Use of new
information in this area.
Relatedness :National : REV/AMD Amendment Z1 of ČSN EN 12899-3(2008)
** End of Subsector **
** End of Sector **
2011-06
List of non-electrotechnical subsectors
Sector A: Services
Subsector Title ISO/TC CEN/TC
reference reference
A01 Tourist services / 329; CEN/WS ETO
A02 Cleaning services / 328
A03 Postal services / 331
A04 Transportation services / 320; CEN/WS 016; CEN/WS SCUTUM
A05 Maintenance services / 319
A06 Building and construction services / 330
A07 Translation services /
A08 Funeral services / CEN/BT/TF 139
A09 Facility management / 348
A10 Services of Real Estate Agents / CEN/BT/TF 180; 373
A11 Security Services / CEN/BT/TF 167; 391; 384; 370; CEN/WS 044; CEN/CLC/TC 4
A12 Consultancy Services / 395; 381
A13 Expertise Services / 405
A14 Aesthetic Services / 403;409
A99 Undetermined / CEN/WS 002; CEN/WS 004; CEN/WS 037; CEN/WS 039; CEN/WS 041; CEN/WS 051; 375; 374; 376; 385; 404
Sector B: Building and construction
Subsector Title ISO/TC CEN/TC
reference reference
B01 Fire protection 21 70; 72; 191; 192
B02 Structures 59; 98 166; 167; 250; 277; 346; 349; 284; 288; 297; 340
B03 Concrete 71 104; CEN/WS 009
B04 Cement 74; 77 51
B05 Fire tests 92 127
B06 Gypsum / 241
B07 Glass 160 129
B08 Doors and windows 162 33
B09 Thermal matters 163 88; 89; 371; CEN/BT WG 173; CEN/WS 036
B10 Timber structures 165 124
B11 Metal structures 167 135
B12 Masonry 179; 196 125; 246
B13 Solar energy 180 312
B14 Geotechnics 182 341; 396
B15 Sanitary appliances / 163; 7
B16 Taps / /
B17 Lighting equipment and lighting / 50; 169 application technology
B18 Scaffolding / 53
B19 Ceramic tiles 189 67
B20 Drainage equipment / 165
B21 Baths / /
B22 Wallcoverings / 99
B23 District heating / 107
B24 Auxiliary and handicraft work / /
B25 Gas distribution installation and / 234; 235; 282 related equipment
B26 Road building and maintenance / 178; 227
B27 Waterproofing materials / 128; 254; 361; 314
B28 Floor coverings 38/SC 12 134
B29 Aggregates / 154
B30 Floor and surfacing / 217; 303; 323; 390
B31 Heating systems in buildings / 228; 247
B32 Precast concrete products / 177; 229
B33 Building design 205 315; 325; 388
B34 Building and construction – Environmental aspect 350; 351
B99 Undetermined / /
Sector C: Chemicals, chemical engineering and food products
Subsector Title ISO/TC CEN/TC
reference reference
C01 Food products 34 174; 275; 302; 360; 307; 327; 338; 387; CEN/WS 008; CEN/WS 018; CEN/WS 054
C02 Paints and related products 35 139; 298; 173
C03 Chemistry 47 317; 363
C04 Laboratory glassware 48 332
C05 Lac / /
C06 Essential oils 54 /
C08 Pesticides 81 /
C09 Surfactants 91 276
C10 Starch 93 /
C11 Tobacco 126 401
C12 Glass plant / /
C13 Fertilizers 134 223; 260
C16 Wood preservatives / /
C17 Trees and plants / /
C18 Adhesives / 193
C19 Chemical analysis 201; 202 382; 347
C20 Explosives and firework / 212; 321
C21 Cosmetics 217 392
C22 Bio-Based products / 411
C99 Undetermined / 386
Sector F: Fundamental standards
Subsector Title ISO/TC CEN/TC
reference reference
F01 Technical drawings 10 /
F02 Units & symbols 12 /
F03 Preferred numbers 19 /
F04 Sieves 24 /
F05 Measuring instruments 30; 113 92; 171; 176; 237;
294; 318; 244; 367; 141; CEN/WS 011
F06 Terminology principles 37 /
F07 Documentation and information 46 304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368
F08 Surfaces / 290
F09 Banking 68 /
F10 Statistics 69 /
F12 Information processing systems 204 224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365
F13 Environmental tests / /
F14 Graphical technology, 130 / sign-boards and nameplates
F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033
F16 Graphical symbols 145 /
F17 Administrative documents 154 CEN/WS MMU
F18 Micrographics 171 /
F19 Optics 172; 187 123; 170
F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362
F21 Value analysis and project / 279 network
F22 Logistics / 379; 273
F23 Energy 203 CEN/CLC/JWG 1; CEN/CLC/JWG 2;
CEN/CLC/JWG 3; CEN/CLC/JWG 4; CEN/WS 027
F99 Undetermined / 389; CEN/WS 057; CEN/WS 058; CEN/WS 060
Sector H: Products for household and leisure use
Subsector Title ISO/TC CEN/TC
reference reference
H01 Cinematography 36 372
H02 Photography 42 /
H03 Consumer questions / 291
H04 Sports equipment 83 136
H05 Oil and gas burners / 47; 131
H06 Horology 114 /
H07 Space heating 116 62; 110; 130; 179; 180
H08 Sizing systems 133; 137 /
H09 Furniture 136 207
H10 Sewing machines 148 /
H11 Heater controls 161 58
H12 Ceramic and glass-ware for food 166 /
H13 Jewellery 174 CEN/WS 047
H14 Caravans 177 245
H15 Toys 181 52
H17 Oil stoves / 46
H18 Central heating boilers / 48; 57; 109; 269
H19 Non-electric cookers and barbecues / 49; 281; 295
H22 Smokers’ lighters and matches / 355; 87
H23 Ladders / 93
H24 Tactile danger warnings / /
H25 Large gas appliances / 106; CEN/CLC/JWG FCGA
H26 Sealing materials / 108; 208
H27 Educational equipment / /
H28 Hunting 191 /
H29 Heat pumps / 113
H30 Equipment for children / 252
H31 Dedicated LPG appliances / 181
H32 Culinary utensils 186 194
H33 Footwear (excluding protective / 309 footwear)
H34 Child safety / CEN/BT/WG 117 398
H99 Undetermined / 299; 364; 369; 402
Sector I: Mechanical engineering
Subsector Title ISO/TC CEN/TC
reference reference
I01 Screw threads 1 /
I02 Fasteners 2 185
I03 Limits & fits / /
I04 Rolling bearings 4 /
I05 Iron pipes 5 203
I06 Pressure vessels 11 54
I07 Shafts 14 /
I08 Agricultural machines 23 144, 334
I09 Small tools 29 213
I10 Splines / /
I11 Machine tools 39 142; 143; 145; 255
I12 Pulleys & belts 41 188
I13 Gas containers 58 23; 286
I14 Gears 60 /
I15 Equipment for petroleum industry 67 12
I16 Internal combustion engines 70; 192 270
I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025
I18 Mining 82 196
I19 Nuclear energy 85 /
I20 Refrigeration 86 44; 182
I21 Chains and chain wheels 100 /
I22 Vacuum technology 112 /
I23 Pumps 115 197
I24 Industrial fans 117 356
I25 Compressors 118 232
I26 Plain bearings 123 /
I27 Earth moving and construction 127; 195 151 equipment
I28 Fluid power 131 /
I29 Gas cleaning / 195
I30 Air distribution / 156
I31 Valves 153; 185 69; 236; 105
I32 Flanges / 74
I33 Information processing in 184 310 automation
I34 Non-ferrous metallic pipes / /
I35 Leisure and recreational machines / 152
I36 Thermoprocessing technology / 186
I37 Printing and paper machines / 198
I38 Leather production, tannery and / 200; 201 related machinery
I39 Machines for metal processing / 202; 322
I40 Industrial piping networks / 267
I41 Membrane filters / 272
I42 Potentially explosive atmospheres / 305
I43 Hydrogen energy 197 /
I44 Nanotechnologies 229 352
I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2; 65, 157; CEN/WS 059
Sector M: Metallic materials
Subsector Title ISO/TC CEN/TC
reference reference
M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110
M02 Zinc / 209
M03 Foundry technology, 25 190; ECISS/TC 31 ECISS/TC 111 including cast iron
M04 Copper 26 133
M05 Welding 44 121
M06 Dimensions of wrought products / /
M07 Manganese and chromium 65 /
M08 Light alloys 79 132
M09 Iron ores 102 /
M10 Metallic coatings 107 240
M11 Powder metallurgy 119 /
M12 Aluminium ores 129 /
M13 Ferroalloys 132 /
M14 Nickel 155 /
M15 Metallic corrosion 156 262; 219
M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101
M17 Heavy metal ores 183 /
M18 Metal wire products / ECISS/TC 30; CEN/BT/TF 196; 378; 407
M20 Tin and tin alloys / 220
M21 Precious metals / 283
M22 Lead and lead alloys / 306
M99 Undetermined / /
Sector N: Non-metallic materials
Subsector Title ISO/TC CEN/TC
reference reference
N01 Paper and board 6 172
N02 Solid fuels 27 335; 343;383; CEN/WS 019
N03 Petroleum products 28 19; 336; CEN/WS 038; CEN/WS 061
N04 Refractories 33 187
N05 Textiles 38 189; 248
N06 Rubber 45 218; 366 CEN/WS 003
N07 Sawn timber 55 38; 175
N08 Mica / /
N09 Plastics 61 249
N10 Cork 87 /
N11 Wood-based panels 89 112
N12 Timber products 99 /
N13 Leather 120 289
N14 Plastics pipes 138 155
N17 Fluorspar 175 /
N18 Glass-fibre reinforced plastics / /
N19 Tapes / 253
N20 Ceramics 206 184
N21 Gaseous fuels and combustible gas 158; 193 238; 408
N22 Feather and related materials / 222
N23 Diamond / 410
N99 Undetermined / /
Sector S: Health, environment and medical equipment
Subsector Title ISO/TC CEN/TC
reference reference
S01 Acoustics and sound 43 126; 211 insulation
S02 Transfusion equipment 76 /
S03 Syringes 84 /
S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162; CEN/WS 026; CEN/WS 043
S05 Dentistry 106 55
S06 Vibration & shock 108 231
S07 Anaesthetic and respiratory 121 215 equipment
S08 Air quality 146 137; 243; 264; CEN/CLC/JWG CMI
S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034
S10 Surgical implants 150 285; CEN/CLC/JWG AIMD
S11 Contraceptives 157 /
S12 Gas analysis / /
S13 Ergonomics 159 122
S14 Prosthetics 168 /
S15 Surgical instruments 170 /
S16 Aids for the disabled 173 293
S17 Respiratory protective devices / 79
S18 Sterilization of equipment 198 102; 204
S19 First aid equipment and rescue systems / 239
S20 Waste collection, handling and / 183 transportation
S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316; CEN/CLC/TC 3; CEN/WS 031; CEN/WS 053; CEN/WS 055
S22 Energy saving / CEN/WS 005 CEN/WS 015
S23 Personal & property protection against aggression/Burglary protection / 263
S24 Soil quality 190 345; CEN/WS 032
S25 Chemical disinfectants and / 216 antiseptics
S26 Environmental management 207 CEN/TC 406; CEN/WS 040
S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120
S28 Demining / CEN/WS 029 CEN/WS 013
S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400; CEN/WS PCEC CEN/WS 012 CEN/WS 020
Sector T: Transport, mechanical handling and packaging
Subsector Title ISO/TC CEN/TC
reference reference
T01 Shipbuilding and maritime 8; 188 15; 300 structures
T02 Aerospace 20 274; AECMA; ECSS ;377
T03 Road vehicles 22 301; 326 CEN/WS IMA
T04 Tyres 31 /
T05 Pallets 51 /
T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393
T07 Glass containers 63 /
T08 Cranes 96 147
T09 Materials handling and 101 148; 149 storage equipment
T10 Freight containers 104 119; 280
T11 Steel wire ropes 105 /
T12 Industrial trucks 110 150; 324
T13 Lifting chains, hooks and ropes 111 168
T14 Packaging 122 261; 120
T15 Cycles 149 333
T16 Lifts & escalators 178 10; 242
T17 Builders hoists / /
T18 Elevating platforms / 98
T19 Road safety / 226; 339
T20 Tram- and railway engineering / 256; / CEN/CLC/WG FPR
T21 Packaging machines / 146
T22 Off-road vehicles / 354
T99 Undetermined / CEN/WS TAF
Sector Z: Information technology
Subsector Title ISO/TC CEN/TC
Z01 Radiocommunication for IT / /
Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI
Z03 Common O.S.I. activities / CEN/CLC - EWOS
Z99 Undetermined / 353; CEN/WS ADN; CEN/WS AUT; CEN/WS BII; CEN/WS CAT; CEN/WS CST; CEN/WS CTC; CEN/WS DFA; CEN/WS DIR; CEN/WS DIS; CEN/WS DPA; CEN/WS DPP; CEN/WS EBE; CEN/WS ECH; CEN/WS ECO; CEN/WS EFI; CEN/WS EMD; CEN/WS ESI; CEN/WS ESR; CEN/WS EUR; CEN/WS FAS; CEN/WS FIN; CEN/WS FS2; CEN/WS FUN; CEN/WS GEN; CEN/WS HIC; CEN/WS ICT; CEN/WS IEC; CEN/WS IHM; CEN/WS INV2; CEN/WS ISD; CEN/WS JXF; CEN/WS KMA; CEN/WS LCT; CEN/WS LTS; CEN/WS MDC; CEN/WS MEE; CEN/WS MES; CEN/WS MET; CEN/WS MLX; CEN/WS MMI; CEN/WS NEA; CEN/WS NOM; CEN/WS ORC; CEN/WS POR; CEN/WS QIS; CEN/WS SAN; CEN/WS SCE; CEN/WS TEX; CEN/WS TWE; CEN/WS UDP; CEN/WS URI; CEN/WS WAC;
CEN/WS XFS; CEN/WS XML; CEN/WS eGo; CEN/WS eIN; CEN/WS ePR
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC
May 2017
Issued on : 2 June 2017
Page 1
Information Procedure on Standards
Notifications registered at CCMC during May 2017
Sector W : ELECTRICAL ENGINEERING
Register issued on : 2 June 2017
Page 2Subsector W06: HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR
Subsector : W06 Registration Date : 2017-05-19Organization : DINCountry : Germany
Project ID : 02226762/0001 Project Established
ICS : 29.130.10National Ref : DIN VDE 0670-803Title : Wrought aluminium and aluminium alloy enclosures for gas-filled high-voltage switchgear
and controlgear
Relatedness :National : New
Subsector : W06 Registration Date : 2017-05-19Organization : DINCountry : Germany
Project ID : 02226763/0001 Project Established
ICS : 29.130.10National Ref : DIN VDE 0670-804Title : Wrought steel enclosures for gas-filled high-voltage switchgear and controlgear
Relatedness :National : New
Subsector : W06 Registration Date : 2017-05-19Organization : DINCountry : Germany
Project ID : 02226764/0001 Project Established
ICS : 29.130.10National Ref : DIN VDE 0670-805Title : Welded composite enclosures of cast and wrought aluminium alloys for gas-filled high-
voltage switchgear and controlgear
Relatedness :National : New
** End of Subsector **
Subsector W08: ELECTRIC CABLES
Subsector : W08 Registration Date : 2017-05-19Organization : CEB-BECCountry : Belgium
Project ID : BE170001/0001 Draft for public enquiry
ICS : 29.060.20National Ref : NBN C 30-005Title : POWER CABLES - Code designation
Relatedness :National : REV/AMD NBN C 33-001
Page 3
Subsector : W08 Registration Date : 2017-05-17Organization : UNECountry : Spain Latest Date for Comments : 2017-06-15
Project ID : P0048157/0001 Draft for public enquiry
ICS :National Ref : PNE 21150Title : Flexible cables for mobile services isolated with rubber of ethylene-propylene and
reinforced sheath of polychloroprene or equivalent elastomer of rated voltage 0,6/1 kV.Scope : This standard defines the construction, dimensions and test requirements for flexible cables
of rated voltage 0,6/1 kV for severe services destined to the supplying of mobile receivers
Relatedness :National : New
Subsector : W08 Registration Date : 2017-05-29Organization : TSECountry : Turkey
Project ID : t1013734/0001 Project Established
ICS : 29.060.20National Ref :Title : Halogen free, resistance to fire signal and control cablesScope : This standard covers halogen free resistance to fire signal and control cables or low-
frequency cables which used in the ibformation communication technology.
Relatedness :National : New
** End of Subsector **
Subsector W27: ELECTRICAL INSTALLATIONS IN BUILDINGS
Subsector : W27 Registration Date : 2017-05-24Organization : MSZT Draft Issue Date : 2017-05-30Country : Hungary Latest Date for Comments : 2017-07-30
Project ID : 84001705/0001 Project Established
ICS : 91.140.50, 91.140.50National Ref : MSZ 447Title : Connection to the low voltage public distribution system
Relatedness :National : New
Subsector : W27 (Secondary Subsector)
Registration Date : 2017-05-24
Organization : MSZT Draft Issue Date : 2017-05-30Country : Hungary Latest Date for Comments : 2017-07-30
Project ID : 84001705/0001 Project Established
ICS : 91.140.50, 91.140.50
Page 4
National Ref : MSZ 447Title : Connection to the low voltage public distribution system
Relatedness :National : New
** End of Subsector **
Subsector W31: LIGHTNING PROTECTION
Subsector : W31 Registration Date : 2017-05-29Organization : TSECountry : Turkey
Project ID : t1013709/0001 Project Established
ICS : 91.120.40National Ref :Title : Protection against lightning - Early streamer emission air terminalsScope : This standard covers early streamer emission air terminals provided to protect facilities and
open areas against direct lightning impact in the early streamer emission lightning protection systems.
Relatedness :National : New
** End of Subsector **
** End of Sector **
List of Subsectors covering work items in CENELEC’s field of activity
(version 2009-05-15)
(Rows or committees shaded in blue indicate changes compared to the last list of subsectors )
U GENERAL ELECTROTECHNICAL STANDARDS
Title IEC TC CLC TC
U01 INFORMATION STRUCTURES, DOCUMENTATION AND GRAPHICAL SYMBOLS
IEC TC 3 IEC SC 3C IEC SC 3D
U02 ALUMINIUM CONDUCTORS. IEC TC 7
U03 SYSTEM ASPECTS FOR ELECTRICAL ENERGY SUPPLY IEC TC 8 CLC TC 8X
U04 ELECTRICAL FLUIDS. IEC TC 10 BTTF 116-1
U05 ELECTRICAL INSULATING MATERIALS AND SYSTEMS. IEC TC 15 IEC TC112
U06 MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION MARKINGS.
IEC TC 16
U07 LETTER SYMBOLS FOR ELECTROTECHNOLOGY. IEC TC 25
U08 ELECTRIC WELDING. IEC TC 26 CLC TC 26A CLC TC 26B
U09 INSULATION CO-ORDINATION. IEC TC 28 IEC TC 109
U10 HIGH-VOLTAGE TESTING. IEC TC 42
U11 ENVIRONMENTAL TESTING OF ELECTROTECHNICAL EQUIPMENT
IEC TC 89 IEC TC 104
U12 RELIABILITY. IEC TC 56
U15 MAGNETIC ALLOYS. IEC TC 68
U16 PROTECTION BY ENCLOSURES. IEC TC 70
U17 SHORT CIRCUIT CURRENTS. IEC TC 73
U18 ENVIRONMENTAL STANDARDIZATION - GENERAL IEC TC 111 CLC TC 111X
U19 RADIO INTERFERENCE, EMC IEC TC 77 + SCs CISPR + SCs
CLC TC 210
U20 SUPERCONDUCTIVITY IEC TC 90
U21 NANOTECHNOLOGY IEC TC 113
U91 QUALITY ASSURANCE ISO TC 176 BTTF 76-3
U92 ADVANCED CERAMICS IEC TC *
U93 ELECTROMAGNETIC HAZARDS IEC TC 106 CLC TC 106X
U94 PUBLIC PROCUREMENT MATTERS CLC TC 218
U95 ENVIRONMENTAL MATTERS BTWG 132-3
U96 USABILITY & SAFETY OF ELECTRICAL PRODUCTS WITH REFERENCE TO PEOPLE WITH SPECIAL NEEDS
BTWG 101-5
U99 UNDETERMINED. (ex: terminology) IEC TC 1
V ELECTRONIC ENGINEERING
Title IEC TC CLC TC
V01 RADIOCOMMUNICATIONS AND CABLE NETWORKS IEC TC 103 CLC TC 209
V02 ELECTRICAL MEASURING EQUIPMENT. IEC TC 13 CLC TC 13 BTWG 105-2
V03 ELECTROACOUSTICS AND ULTRASONICS. IEC TC 29 IEC TC 87
V04 INSTRUMENT TRANSFORMERS. IEC TC 38 CLC TC 38X
V05 ELECTRONIC TUBES. IEC TC 39
V06 CAPACITORS AND RESISTORS. IEC TC 40 CLC TC 40XA CLC TC 40XB
V07 NUCLEAR INSTRUMENTATION. IEC TC 45 IEC SC 45A IEC SC 45B
CLC TC 45AX CLC TC45B
V08 CABLES AND WIRES FOR TELECOMMUNICATIONS IEC TC 46 + SCs CLC TC 46X + SCs
V09 SEMICONDUCTORS. IEC TC 47 + SCs IEC TC 110
V10 ELECTROMECHANICAL COMPONENTS. IEC TC 48 + SCs IEC TC 91
BTWG 117-1
V11 PIEZOELECTRIC DEVICES. IEC TC 49
V12 MAGNETIC COMPONENTS. IEC TC 51
V13 PRINTED CIRCUITS.
V15 ELECTROMEDICAL EQUIPMENT. IEC TC 62 + SCs CLC TC 62
V16 PROCESS CONTROL. IEC TC 65 + SCs CLC TC 65CX BTWG 109-2
V17 ELECTRONIC MEASURING EQUIPMENT. IEC TC 66 IEC TC 85
BTTF126-1
V18 AUTOMATIC CONTROLS. IEC TC 72 CLC TC 72
V19 SAFETY OF DATA PROCESSING EQUIPMENT. Merged into V24
V20 RADIATION SAFETY AND LASER EQUIPMENT. IEC TC 76 CLC TC 76
V21 ALARM SYSTEMS. IEC TC 79 CLC TC 79
V22 NAVIGATIONAL INSTRUMENTS. IEC TC 80
V23 PHOTOVOLTAIC SYSTEMS. IEC TC 82 CLC TC 82
V24 INFORMATION TECHNOLOGY EQUIPMENT AND AUDIO, VIDEO AND AUDIO-VISUAL EQUIPMENT AND SYSTEMS
IEC TC 100 + TAs
IEC TC 108
JTC1/25 & 26
CLC TC 108X CLC TC 205 + SC CLC TC 206 CLC TC 215 CLC/JTC 1
V27 AUDIO, VIDEO AND AUDIO-VISUAL EQUIPMENT AND SYSTEMS
Merged with V24
V28 FIBRE OPTICS. IEC TC 86 + SCs
CLC TC 86A CLC TC 86BXA
V30 DESIGN AUTOMATION IEC TC 93
V31 SURFACE TRANSPORT ELECTROTECHNICAL SYSTEMS
BTTF 69-3
V32 AVIONICS IEC TC 107 CLC TC 107X
W ELECTRICAL ENGINEERING
Title IEC TC CLC TC
W01 ELECTRIC ROTATING MACHINES. IEC TC 2 CLC TC 2
W02 TURBINES: Hydraulic, steam, wind and marine energy IEC TC 4 IEC TC 5 IEC TC 88 IEC TC 114
CLC TC 88
W03 ELECTRIC TRACTION EQUIPMENT. IEC TC 9 CLC TC 9X + SCs
W04 OVERHEAD ELECTRIC LINES. IEC TC 11 CLC TC 11 BTTF 129-1 BTTF 132-1
W05 POWER TRANSFORMERS. IEC TC 14 CLC TC 14
W06 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR. IEC TC 17 IEC SC 17A IEC SC 17C
CLC TC 17AC
W07 ELECTRICAL INSTALLATIONS IN SHIPS. IEC TC 18 IEC SC 18A
W08 ELECTRIC CABLES. IEC TC 20 CLC TC 20
W09 SECONDARY BATTERIES. IEC TC 21 IEC SC 21A
CLC TC 21X
W10 POWER ELECTRONICS. IEC TC 22 + SCs CLC TC 22X
W11 ELECTRICAL ACCESSORIES. IEC TC 23 + SCs CLC TC 23BX CLC TC 23E CLC TC 213 BTWG 112-1 BTTF 129-2
W12 ELECTROHEAT. IEC TC 27
W13 EQUIPMENT FOR EXPLOSIVE ATMOSPHERES. IEC TC 31 + SCs
IEC TC 101 CLC TC 31 + SCs
CLC TC 216
W14 FUSES. IEC TC 32 IEC SC 32A
W15 POWER CAPACITORS. IEC TC 33
W16 LAMP AND LUMINAIRES. IEC TC 34 + SCs
CLC TC 34Z
W17 PRIMARY BATTERIES. IEC TC 35
W18 INSULATORS. IEC TC 36 + SCs
CLC TC 36A
W19 SURGE ARRESTERS. IEC TC 37 + SCs
CLC TC 37A
W20 ELECTRICAL RELAYS. IEC TC 94 IEC TC 95
(CLC TC 94)1
W22 ELECTRICAL EQUIPMENT OF MACHINE TOOLS. IEC TC 44 CLC TC 44X
W23 WINDING WIRES. IEC TC 55 CLC TC 55
W24 TELECONTROL SYSTEMS. IEC TC 57
W25 DOMESTIC APPLIANCE PERFORMANCE. IEC TC 59 + SCs CLC TC 59X
W26 DOMESTIC ELECTRICAL APPLIANCES AND MOTOR-OPERATED ELECTRIC TOOLS
IEC TC 61 + SCs
TC 116 CLC TC 61 CLC TC 116 BTTF 128-1
W27 ELECTRICAL INSTALLATIONS IN BUILDINGS. IEC TC 64 CLC TC 64 BTTF 62-3
W28 ELECTRIC VEHICLES. IEC TC 69
W29 ELECTRICAL INSTALLATIONS FOR OUTDOOR SITES
W30 LIVE WORKING. IEC TC 78 CLC TC 78
W31 LIGHTNING PROTECTION. IEC TC 81 CLC TC 81X
W32 LOW-VOLTAGE POWER TRANSFORMERS. IEC TC 96
W33 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR. IEC TC 17 IEC SC 17B IEC SC 17D
CLC TC 17B (CLC TC 17D)
1
W34 LOW-VOLTAGE FUSES. IEC SC 32B IEC SC 32C
W35 SYSTEM ENGINEERING AND ERECTION OF ELECTRICAL POWER INSTALLATIONS
IEC TC 99 CLC TC 99X
W36 ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES
IEC TC 97 CLC TC 97
W37 FUEL CELL TECHNOLOGIES IEC TC 105
W38 SAFETY OF ELECTROSTATIC PAINTING AND FINISHING EQUIPMENT
CLC TC 204
W39 HIGH VOLTAGE DIRECT CURRENT (HVDC) TRANSMISSION TECHNOLOGY
IEC TC 115
Z IT MATTERS NOT COVERED BY OTHER SUBSECTORS
Z01 CENELEC/ETSI EMC conducted transmission networks JWG EMC
Z02 WORK IN THE FIELD OF ISO/IEC JTC 1 AND SUB-COMMITTEES JTC 1, except WG 25 & 26
1 Dormant
List of symbols typically used by National Committees for their national standards references
CLC REF
EN 55020:2002 EN 55020:2002/A1:2003 Draft Standards
AT ÖVE/ÖNORM EN 55020+A1+A2 ÖVE/ÖNORM EN 55020+A1+A2 E or ENTWURF
BE NBN EN 55020/1:2003 NBN EN 55020/1:2003 PR NBN
CH SN EN 55020:2002 SN EN 55020:2002/A1:2002
CY CYS EN 55020:2002 CYS EN 55020:2002-iss1
CZ CSN EN 55020 ED. 2 CSN EN 55020 ED. 2/A1
DE DIN EN 55020 (VDE 0872-20) DIN EN 55020 (VDE 0872-20) Reference of the future standard or work item number, ex: 02218905
DK DS/EN 55020:2005 DS/EN 55020/A1:2005 Reference of the future standard
EE EVS-EN 55020:2002 EVS-EN 55020:2003/A1:2003 Reference of the future standard
ES UNE-EN 55020:2004 UNE-EN 55020-A1:2004 PNE
FI SFS-EN 55020:2002 SFS-EN 55020:2000/A1:2003 Reference of the future standard
FR NF EN 55020 NF EN 55020/A1 PR NF
GB BS EN 55020:2002 BS EN 55020:2002+A1:2003 Reference of the future standard
GR ELOT EN 55020:2002 ELOT EN 55020/A1:2003 Reference of the future standard
HU MSZ EN 55020:2004 MSZ EN 55020:2004 PR I.S. or Reference of the future standard
IE I.S. EN 55020:2005 I.S. EN 55020/A1:2005
IS IST EN 55020:2002 IST EN 55020:2002/A1:2003
IT CEI EN 55020:2003 CEI EN 55020/A1:2003 Reference of the future standard
LT LST EN 55020+A1:2003 LST EN 55020+A1:2003
LU** EN 55020:2002 EN 55020:2002/A1:2003
LV LVS EN 55020:2002 LVS EN 55020:2002 /A1:2003
MT MSA EN 55020:2002 MSA EN 55020:2002/A1:2003
NL NEN-EN 55020:2002/C12:2005 NEN-EN 55020:2002/A1:2003/C11:2005 ONTWERP NEN
NO NEK EN 55020:2002 NEK EN 55020:2002/A1:2003
PL PN-EN 55020:2003 PN-EN 55020:2003/A1:2003
PT NP EN 55020:2002 NP EN 55020:2002/A1:2003 PR NP
RO SR EN 55020:2003 SR EN 55020:2003/A1:2004
SE SS-EN 55020 SS-EN 55020/A1:2003 Reference of the future standard
SI SIST EN 55020:2003 SIST EN 55020:2003/A1:2003
SK STN EN 55020:2002 STN EN 55020/A1:2003
** Luxembourg applies the CENELEC reference number without a national prefix
Top Related