Download - ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

Transcript
Page 1: ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

 

2002-11-01 ICS:01.040.13:13.020.10 ΕΛΟΤ ISO 14050

ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ

HELLENIC STANDARD

Περιβαλλοντική διαχείριση - Λεξιλόγιο

Management environnemental - Vocabulaire

Κλάση Τιµολόγησης: 13 © ΕΛΟΤ ΕΛΛΗΝΙΚΟΣ ΟΡΓΑΝΙΣΜΟΣ ΤΥΠΟΠΟΙΗΣHΣ Α.Ε. Αχαρνών 313 •11145 Αθήνα

Page 2: ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

 

ΕΛΟΤ ISO 14050

Εθνικός Πρόλογος

Αυτό είναι το Φύλλο Επικύρωσης του εγκεκριµένου Ευρωπαϊκού Προτύπου ISO 14050:2002 ως Ελληνικού Προτύπου. Το πρότυπο αυτό διατίθεται στην Αγγλική, ή Γαλλική ή Γερµανική γλώσσα από τον Ελληνικό Oργανισµό Τυποποίησης Α.Ε.

National Foreword

This Endorsement Sheet ratifies the approval of European Standard ISO 14050:2002 as a Hellenic Standard. This standard is available in English, French or German from the Hellenic Organization for Standardization S.A.

Page 3: ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

 

ISO 14050:2002(E/F)

iii

Contents Page

Foreword......................................................................................................................................................................v Introduction...............................................................................................................................................................vii Scope .........................................................................................................................................................................1 Terms and definitions ................................................................................................................................................1 1 General terms relating to environmental management .............................................................................2 2 Terms relating to environmental management systems...........................................................................6 3 Terms relating to auditing.............................................................................................................................7 4 Terms relating to product system..............................................................................................................10 5 Terms relating to life cycle assessment....................................................................................................13 6 Terms relating to environmental labelling and declarations ..................................................................17 Annex A (informative) Additional terms and definitions from Technical Report ISO/TR 14061 .......................20 Annex B (informative) Additional concepts encountered in the international environmental community ....23 Bibliography..............................................................................................................................................................25 Alphabetical index ....................................................................................................................................................26

Page 4: ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

 

ISO 14050:2002(E/F)

iv

Sommaire Page

Avant-propos..............................................................................................................................................................vi Introduction ................................................................................................................................................................ix Domaine d'application................................................................................................................................................1 Termes et définitions..................................................................................................................................................1 1 Termes généraux relatifs au management environnemental....................................................................2 2 Termes relatifs aux systèmes de management environnemental ............................................................6 3 Termes relatifs à l'audit.................................................................................................................................7 4 Termes relatifs aux systèmes de produits................................................................................................10 5 Termes relatifs à l'analyse du cycle de vie ..............................................................................................13 6 Termes relatifs aux marquages et aux déclarations environnementaux...............................................17 Annexe A (informative) Termes et définitions supplémentaires tirés du Rapport technique

ISO/TR 14061 ................................................................................................................................................20 Annexe B (informative) Notions additionnelles rencontrées dans la communauté environnementale

internationale ...............................................................................................................................................23 Bibliographie .............................................................................................................................................................25 Index alphabétique ...................................................................................................................................................28

Page 5: ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

 

ISO 14050:2002(E/F)

v

Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.

The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.

Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.

ISO 14050 was prepared by Technical Committee ISO/TC 207, Environmental Management, Subcommittee SC 6, Terms and definitions.

This second edition cancels and replaces the first edition (ISO 14050:1998), which has been technically revised, notably by incorporation of draft amendment 1 (ISO 14050:1998/DAM 1).

Annexes A and B of this International Standard are for information only.

Page 6: ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

 

ISO 14050:2002(E/F)

vi

Avant-propos

L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales, gouvernementales et non gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec la Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.

Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI, Partie 3.

La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres votants.

L'attention est appelée sur le fait que certains des éléments de la présente Norme internationale peuvent faire l'objet de droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable de ne pas avoir identifié de tels droits de propriété et averti de leur existence.

L'ISO 14050 a été élaborée par le comité technique ISO/TC 207, Management environnemental, sous-comité SC 6, Termes et définitions.

Cette deuxième édition annule et remplace la première édition (ISO 14050:1998), dont elle constitue une révision technique, notamment par l'incorporation du projet d'amendement 1 (ISO 14050:1998/DAM 1).

Les annexes A et B de la présente Norme internationale sont données uniquement à titre d'information.

Page 7: ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

 

ISO 14050:2002(E/F)

vii

Introduction

This International Standard contains concepts and their definitions as used in the ISO 14000 series of International Standards related to environmental management.

Communication is important in the implementation and operation of Environmental Management Systems. This communication will be most effective if there is a common understanding of the terms used.

Many environmental terms and definitions are the result of recently developed concepts. The gradual evolution of these environmental concepts inevitably means that environmental terminology will continue to develop. The purpose of this document is to convey understanding of the terms used in the ISO 14000 series of International Standards.

The terms and definitions in this International Standard are derived from the following International Standards on environmental management.

ISO 14001:1996 Environmental management systems — Specification with guidance for use

ISO 14004:1996 Environmental management systems — General guidelines on principles, systems and supporting techniques

ISO 14010:1996 Guidelines for environmental auditing — General principles

ISO 14011:1996 Guidelines for environmental auditing — Audit procedures — Auditing of environmental management systems

ISO 14012:1996 Guidelines for environmental auditing — Qualification criteria for environmental auditors

ISO 14020:2000 Environmental labels and declarations — General principles

ISO 14021:1999 Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling)

ISO 14024:1999 Environmental labels and declarations — Type I environmental labelling — Principles and procedures

ISO/TR 14025:2000 Environmental labels and declarations — Type III environmental declarations

ISO 14031:1999 Environmental management — Environmental performance evaluation — Guidelines

ISO 14040:1997 Environmental management — Life cycle assessment — Principles and framework

ISO 14041:1998 Environmental management — Life cycle assessment — Goal and scope definition and inventory analysis

ISO 14042:2000 Environmental management — Life cycle assessment — Life cycle impact assessment

ISO 14043:2000 Environmental management — Life cycle assessment — Life cycle interpretation

Page 8: ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

 

ISO 14050:2002(E/F)

viii

In addition, annex A gives terms and definitions from the Technical Report ISO/TR 14061:1998, Information to assist forestry organizations in the use of Environmental Management System standards ISO 14001 and ISO 14004.

Because of the ongoing work on the development of environmental management standards within ISO/TC 207, and in cooperation with ISO/TC 176, including the publication of additional and revised International Standards, this International Standard will be reviewed, and as appropriate revised or amended.

Other concepts which may be encountered in the environmental management field are not defined in this International Standard. However, to aid users of the ISO 14000 series of standards on environmental management, some of these additional concepts are included with bibliographic references in annex B.

Users should be aware that the application and description of these concepts vary throughout the international environmental community. Their presence in annex B is not intended to promote or endorse the use of these concepts.

Page 9: ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

 

ISO 14050:2002(E/F)

ix

Introduction

La présente Norme internationale comprend des notions et leurs définitions telles qu'utilisées dans les Normes internationales de la famille de normes ISO 14000 relatives au management environnemental.

La communication est importante dans la réalisation et le fonctionnement des Systèmes de management environnemental. Cette communication sera d'autant plus efficace qu'il existera une définition commune des termes employés.

Beaucoup de termes et de définitions liés à l'environnement sont le résultat de notions développées récemment. Cette évolution progressive des notions environnementales signifie inévitablement que la terminologie environne-mentale va continuer à se développer. L'objet de ce document est de définir la signification des termes utilisés dans les Normes internationales de la famille de normes ISO 14000 relatives au management environnemental.

Les termes et définitions de la présente Norme internationale proviennent des Normes internationales suivantes sur le management environnemental.

ISO 14001:1996 Systèmes de management environnemental — Spécification et lignes directrices pour son utilisation

ISO 14004:1996 Systèmes de management environnemental — Lignes directrices générales concernant les principes, les systèmes et les techniques de mise en œuvre

ISO 14010:1996 Lignes directrices pour l'audit environnemental — Principes généraux

ISO 14011:1996 Lignes directrices pour l'audit environnemental — Procédures d'audit — Audit des systèmes de management environnemental

ISO 14012:1996 Lignes directrices pour l'audit environnemental — Critères de qualification pour les auditeurs environnementaux

ISO 14020:2000 Étiquettes et déclarations environnementales — Principes généraux

ISO 14021:1999 Marquage et déclarations environnementaux — Autodéclarations environnementales (Étiquetage de type II)

ISO 14024:1999 Marquage et déclarations environnementaux — Étiquetage environnemental de type I — Principes et méthodes

ISO/TR 14025:2000 Marquage et déclarations environnementaux — Déclarations environnementales de type III

ISO 14031:1999 Management environnemental — Évaluation de la performance environnementale — Lignes directrices

ISO 14040:1997 Management environnemental — Analyse du cycle de vie — Principes et cadre

ISO 14041:1998 Management environnemental — Analyse du cycle de vie — Définition de l'objectif et du champ d'étude et analyse de l'inventaire

ISO 14042:2000 Management environnemental — Analyse du cycle de vie — Évaluation de l'impact du cycle de vie

ISO 14043:2000 Management environnemental — Analyse du cycle de vie — Interprétation du cycle de vie

Page 10: ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

 

ISO 14050:2002(E/F)

x

De plus, l'annexe A donne les termes et définitions du Rapport technique ISO/TR 14061:1998, Information pour assister les organismes forestiers dans l'utilisation des normes ISO 14001 et ISO 14004 relatives aux systèmes de management environnemental.

Étant donné que le travail actuellement en cours sur le développement des normes de management environnemental, dans le cadre de l'ISO/TC 207, et en coopération avec l'ISO/TC 176, comprend la publication de Normes internationales nouvelles ou révisées, la présente Norme internationale sera revue et, selon le cas, révisée ou amendée.

Certaines notions qui pourraient être rencontrées dans le domaine du management environnemental ne sont pas définies dans la présente Norme internationale. Cependant, afin d'aider les utilisateurs des normes de la série ISO 14000 sur le management environnemental, ces notions additionnelles sont incluses, avec leurs références bibliographiques, dans l'annexe B.

Les utilisateurs sont avertis que l'application et la description de ces notions varient dans la communauté environnementale internationale. Leur présence dans l'annexe B n'est pas destinée à promouvoir l'utilisation de ces notions.

Page 11: ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

 

INTERNATIONAL STANDARD NORME INTERNATIONALE ISO 14050:2002(E/F)

1

Environmental management — Vocabulary

Management environnemental — Vocabulaire

Scope Domaine d'application

This International Standard contains definitions offundamental concepts related to environmental man-agement, published in the ISO 14000 series of Inter-national Standards.

La présente Norme internationale contient les défini-tions de notions fondamentales, en rapport directavec le management environnemental, publiées dansla série de normes ISO 14000 relatives au manage-ment environnemental.

Terms and definitions

Termes et définitions

In some cases, the special usage of a concept in aparticular context is indicated by the qualificationgiven in angle brackets before the definition.

The relevant source is given in brackets for each defi-nition and note. If the same definition appears in morethan one document, the earliest document is normallygiven as source.

Dans quelques cas, l'usage particulier d'une notiondans son contexte spécifique est signalé par un quali-ficatif entre crochets angulaires avant la définition.

L'origine de chaque définition et note est donnée en-tre parenthèses. Lorsque la même définition apparaîtdans plusieurs documents, l'origine est généralementcelle du document le plus ancien.

Page 12: ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

 

ISO 14050:2002(E/F)

2

1 General terms relating to environmental management

1 Termes généraux relatifs au management environnemental

1.1 environment surroundings in which an organization (1.4) oper-ates, including air, water, land, natural resources,flora, fauna, humans, and their interrelation

NOTE Surroundings in this context extend from withinan organization to the global system.

[ISO 14001]

1.1 environnement milieu dans lequel un organisme (1.4) fonctionne, in-cluant l'air, l'eau, la terre, les ressources naturelles, laflore, la faune, les êtres humains et leurs interrelations

NOTE Dans ce contexte, le milieu s'étend de l'intérieurde l'organisme au système global.

[ISO 14001]

1.2 environmental aspect element of an organization's (1.4) activities, productsor services that can interact with the environment(1.1)

NOTE A significant environmental aspect is an en-vironmental aspect that has or can have a significant en-vironmental impact (1.3).

[ISO 14001]

1.2 aspect environnemental élément des activités, produits ou services d'un or-ganisme (1.4), susceptible d'interactions avec l'envi-ronnement (1.1)

NOTE Un aspect environnemental significatif est unaspect environnemental qui a ou peut avoir un impact envi-ronnemental (1.3) significatif.

[ISO 14001]

1.3 environmental impact any change to the environment (1.1), whether ad-verse or beneficial, wholly or partially resulting froman organization's (1.4) activities, products or services

[ISO 14001]

1.3 impact environnemental toute modification de l'environnement (1.1), négativeou bénéfique, résultant totalement ou partiellementdes activités, produits ou services d'un organisme(1.4)

[ISO 14001]

1.4 organization company, corporation, firm, enterprise, authority orinstitution, or part or combination thereof, whether in-corporated or not, public or private, that has its ownfunctions and administration

NOTE For organizations with more than one operatingunit, a single operating unit may be defined as an organiza-tion.

[ISO 14001]

1.4 organisme compagnie, société, firme, entreprise, autorité ouinstitution, ou partie ou combinaison de celles-ci, àresponsabilité limitée ou d'un autre statut, de droitpublic ou privé, qui a sa propre structure fonctionnelleet administrative

NOTE Dans les organismes constitués de plusieursunités opérationnelles, une unité isolée peut être définiecomme un organisme.

[ISO 14001]

Page 13: ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

 

ISO 14050:2002(E/F)

3

1.5 interested party person or group having an interest in the performanceor outcome of an organization or a system

NOTE 1 “Outcome” includes products and agreements;“system” includes product systems and environmental label-ling and declaration systems.

NOTE 2 This generic definition is not taken directly fromany other document. The concept is defined specificallyfrom the point of view of environmental performance inISO 14001 (with identical definition in ISO 14004 andISO 14031), of type I environmental labelling in ISO 14024,of type III environmental declaration in ISO/TR 14025 and oflife cycle assessment in ISO 14040.

The definitions are as follows:

individual or group concerned with or affected by theenvironmental performance of an organization

[ISO 14001]

any party affected by a type I environmental labellingprogramme

[ISO 14024]

any party affected by the development and use of atype III environmental declaration

[ISO/TR 14025]

individual or group concerned with or affected by theenvironmental performance of a product system, or bythe results of the life cycle assessment

[ISO 14040]

1.5 partie intéressée personne ou groupe ayant un intérêt dans la perform-ance ou les résultats d'un organisme (1.4) ou d'unsystème

NOTE 1 Les «résultats» comprennent les produits et lesaccords; «système» comprend les systèmes de produits etles systèmes de déclaration et d'étiquetage environnemen-taux.

NOTE 2 Cette définition générique n'est pas tirée direc-tement d'un autre document. Le concept est défini spéci-fiquement à partir du point de vue de la performanceenvironnementale de l'ISO 14001 (avec une définition iden-tique pour l'ISO 14004 et l'ISO 14031), de l'ISO 14024 surl'étiquetage environnemental de type I, de l'ISO/TR 14025sur l'étiquetage environnemental de type III et del'ISO 14040 sur l'analyse du cycle de vie.

Les définitions sont les suivantes:

individu ou groupe concerné ou affecté par la perform-ance environnementale d'un organisme

[ISO 14001]

toute partie affectée par un programme de label envi-ronnemental de type I

[ISO 14024]

toute partie affectée par le développement et l'utilisa-tion d'une déclaration environnementale de type III

[ISO/TR 14025]

individu ou groupe concerné ou affecté par la perform-ance environnementale d'un système de produits, oupar les résultats de l'analyse du cycle de vie

[ISO 14040]

1.6 third party person or body that is recognized as being indepen-dent of the parties involved, as concerns the issues inquestion

NOTE 1 “Parties involved” are usually supplier (“firstparty”) and purchaser (“second party”) interests.

[ISO 14024]

NOTE 2 “Third party” does not necessarily imply the in-volvement of a certification body.

[ISO/TR 14025]

1.6 tierce partie personne ou organisme reconnu(e) comme indépen-dant(e) des parties en cause, en ce qui concerne leproblème traité

NOTE 1 Les «parties en cause» représentent générale-ment les intérêts du fournisseur («première partie») et ceuxde l'acheteur («seconde partie»).

[ISO 14024]

NOTE 2 La notion de «tierce partie» n'implique pasnécessairement la participation d'un organisme de certifi-cation.

[ISO/TR 14025]

Page 14: ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

 

ISO 14050:2002(E/F)

4

1.7 certification procedure by which a third party (1.6) gives writtenassurance that a product, process or service con-forms to specified requirements

[ISO 14024]

1.7 certification procédure par laquelle une tierce partie (1.6) donneune assurance écrite qu'un produit, un processus ouun service est conforme aux exigences spécifiées

[ISO 14024]

1.8 prevention of pollution use of processes, practices, materials or products thatavoid, reduce or control pollution, which may includerecycling, treatment, process changes, controlmechanisms, efficient use of resources and materialsubstitution

NOTE The potential benefits of prevention of pollutioninclude the reduction of adverse environmental impacts(1.3), improved efficiency and reduced costs.

[ISO 14001]

1.8 prévention de la pollution utilisation de procédés, pratiques, matériaux ou pro-duits qui empêche, réduit ou contrôle la pollution, quipeut inclure le recyclage, le traitement, les change-ments de procédés, les mécanismes de contrôle, l'uti-lisation efficace des ressources et la substitution dematériaux

NOTE Les bénéfices potentiels de la prévention de lapollution incluent la réduction des impacts environnemen-taux (1.3) négatifs, l'amélioration de l'efficacité et la réduc-tion des coûts.

[ISO 14001]

1.9 waste anything for which the generator or holder has no fur-ther use and which is discarded or is released to theenvironment (1.1)

[ISO 14021]

NOTE “Waste” is also defined from the point of view oflife cycle assessment in ISO 14040 as: “any output from theproduct system which is disposed of ”.

1.9 déchet tout bien pour lequel le producteur ou le détenteur n'apas d'autre utilisation et qui est éliminé ou disséminédans l'environnement (1.1)

[ISO 14021]

NOTE «Déchet» est également défini du point de vuede l'analyse du cycle de vie dans l'ISO 14040 comme suit:«tout sortant du système de produits qui est éliminé».

1.10 transparency open, comprehensive and understandable presenta-tion of information

[ISO 14040]

1.10 transparence présentation ouverte, complète et compréhensibledes informations

[ISO 14040]

1.11 environmental performance results of an organization's (1.4) management of itsenvironmental aspects (1.2)

NOTE In the context of environmental managementsystems (2.1), results may be measured against the or-ganization's (1.4) environmental policy (2.1.1), objec-tives (2.1.2), and targets (2.1.3).

[ISO 14031]

1.11 performance environnementale résultats obtenus par la direction d'un organisme(1.4) concernant ses aspects environnementaux(1.2)

NOTE Dans le cadre des systèmes de managementenvironnemental (2.1), les résultats peuvent être mesuréspar rapport à la politique environnementale (2.1.1), auxcibles environnementales (2.1.3) et aux objectifs envi-ronnementaux (2.1.2) de l'organisme

[ISO 14031]

Page 15: ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

 

ISO 14050:2002(E/F)

5

1.11.1 environmental performance evaluation EPE process to facilitate management decisions regardingan organization's (1.4) environmental performance(1.11) by selecting indicators, collecting and analysingdata, assessing information against environmentalperformance criteria (1.11.1.1), reporting and com-municating, and periodically reviewing and improvingthis process

[ISO 14031]

1.11.1 évaluation de la performance

environnementale EPE processus visant à appuyer les décisions de la direc-tion pour établir la performance environnementale(1.11) d'un organisme (1.4) et qui comprend le choixdes indicateurs, le recueil et l'analyse des données,l'évaluation des informations par rapport aux critèresde performance environnementale (1.11.1.1), lesrapports et modes communication, la revue pério-dique et l'amélioration continue de ce processus

[ISO 14031]

1.11.1.1 environmental performance criterion environmental objective (2.1.2), target (2.1.3), orother intended level of environmental performance(1.11) set by the management of the organization(1.4) and used for the purpose of environmental per-formance evaluation (1.11.1)

[ISO 14031]

1.11.1.1 critère de performance environnementale objectif environnemental (2.1.2), cible environne-mentale (2.1.3) ou tout autre niveau de performanceenvironnementale (1.11) prévu, défini par la directionde l'organisme (1.4), et utilisé à des fins d'évaluationde la performance environnementale (1.11.1)

[ISO 14031]

1.11.1.2 environmental condition indicator ECI specific expression that provides information aboutthe local, regional, national, or global condition of theenvironment (1.1)

NOTE “Regional” may refer to a state, a province, or agroup of states within a country, or it may refer to a group ofcountries or a continent, depending on the scale of the con-dition of the environment that the organization (1.4)chooses to consider.

[ISO 14031]

1.11.1.2 indicateur de condition environnementale ECI expression spécifique qui fournit des informations surla situation locale, régionale, nationale ou mondialede l'environnement (1.1)

NOTE Le terme «régional» peut faire référence à unÉtat, une province ou un groupe d'États au sein d'un pays,ou encore à un groupe de pays ou à un continent, selon leniveau de situation environnementale que l'organisme (1.4)choisit de prendre en compte.

[ISO 14031]

1.11.1.3 environmental performance indicator EPI specific expression that provides information about anorganization's (1.4) environmental performance(1.11)

[ISO 14031]

1.11.1.3 indicateur de performance

environnementale IPE expression spécifique qui fournit des informations surla performance environnementale (1.11) d'un or-ganisme (1.4)

[ISO 14031]

1.11.1.3.1 management performance indicator MPI environmental performance indicator (1.11.1.3) thatprovides information about the management efforts toinfluence an organization's (1.4) environmental per-formance (1.11)

[ISO 14031]

1.11.1.3.1 indicateur de performance de management IPM indicateur de performance environnementale(1.11.1.3) qui fournit des informations sur les effortsaccomplis par la direction pour influencer la perform-ance environnementale (1.11) d'un organisme (1.4)

[ISO 14031]

Page 16: ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

 

ISO 14050:2002(E/F)

6

1.11.1.3.2 operational performance indicator OPI environmental performance indicator (1.11.1.3)that provides information about the environmentalperformance (1.11) of an organization's (1.4) opera-tions

[ISO 14031]

1.11.1.3.2 indicateur de performance opérationnelle IPO indicateur de performance environnementale(1.11.1.3) qui fournit des informations sur la perform-ance environnementale (1.11) relative aux opéra-tions d'un organisme (1.4)

[ISO 14031]

2 Terms relating to environmental management systems

2 Termes relatifs aux systèmes de management environnemental

2.1 environmental management system EMS part of the overall management system that includesorganizational structure, planning activities, responsi-bilities, practices, procedures, processes and re-sources for developing, implementing, achieving,reviewing and maintaining the environmental policy(2.1.1)

[ISO 14001]

2.1 système de management environnemental SME composante du système de management global quiinclut la structure organisationnelle, les activités deplanification, les responsabilités, les pratiques, lesprocédures, les procédés et les ressources pour éla-borer, mettre en œuvre, réaliser, passer en revue etmaintenir la politique environnementale (2.1.1)

[ISO 14001]

2.1.1 environmental policy statement by the organization (1.4) of its intentionsand principles in relation to its overall environmentalperformance (2.1.5) which provides a framework foraction and for the setting of its environmental objec-tives (2.1.2) and targets (2.1.3)

[ISO 14001]

2.1.1 politique environnementale déclaration par l'organisme (1.4) de ses intentions etde ses principes relativement à sa performance en-vironnementale (2.1.5) globale qui fournit un cadre àl'action et à l'établissement de ses objectifs environ-nementaux (2.1.2) et cibles environnementales(2.1.3)

[ISO 14001]

2.1.2 environmental objective overall environmental goal, arising from the environ-mental policy (2.1.1), that an organization (1.4) setsitself to achieve, and which is quantified where practi-cable

[ISO 14001]

2.1.2 objectif environnemental but environnemental général qu'un organisme (1.4)se fixe, résultant de la politique environnementale(2.1.1), et quantifié dans les cas où cela est possible

[ISO 14001]

2.1.3 environmental target detailed performance requirement, quantified wherepracticable, applicable to the organization (1.4) orparts thereof, that arises from the environmental ob-jectives (2.1.2) and that needs to be set and met inorder to achieve those objectives

[ISO 14001]

2.1.3 cible environnementale exigence de performance détaillée, quantifiée si celaest possible, pouvant s'appliquer à l'ensemble ou àune partie de l'organisme (1.4), qui résulte desobjectifs environnementaux (2.1.2), et qui doit êtrefixée et réalisée pour atteindre ces objectifs

[ISO 14001]

Page 17: ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

 

ISO 14050:2002(E/F)

7

2.1.4 continual improvement process of enhancing the environmental manage-ment system (2.1) to achieve improvements in over-all environmental performance (2.1.5) in line withthe organization's (1.4) environmental policy(2.1.1)

NOTE The process need not take place in all areas ofactivity simultaneously.

[ISO 14001]

2.1.4 amélioration continue processus d'enrichissement du système de man-agement environnemental (2.1) pour obtenir desaméliorations de la performance environnementale(2.1.5) globale en accord avec la politique environ-nementale (2.1.1) de l'organisme (1.4)

NOTE Le processus ne nécessite pas d'être appliquédans tous les domaines d'activité simultanément.

[ISO 14001]

2.1.5 environmental performance ⟨management system⟩ measurable results of the en-vironmental management system (2.1), related toan organization's (1.4) control of its environmentalaspects (1.2), based on its environmental policy(2.1.1), objectives (2.1.2) and targets (2.1.3)

[ISO 14001]

2.1.5 performance environnementale ⟨système de management⟩ résultats mesurables dusystème de management environnemental (2.1),en relation avec la maîtrise par l'organisme (1.4) deses aspects environnementaux (1.2) sur la base desa politique environnementale (2.1.1), de ses ob-jectifs environnementaux (2.1.2) et cibles envi-ronnementales (2.1.3)

[ISO 14001]

3 Terms relating to auditing

3 Termes relatifs à l'audit

3.1 environmental audit systematic, documented verification process of objec-tively obtaining and evaluating audit evidence (3.4)to determine whether specified environmental activi-ties, events, conditions, management systems, or in-formation about these matters conform with auditcriteria (3.3), and communicating the results of thisprocess to the client

[ISO 14010]

3.1 audit environnemental processus de vérification systématique et documentépermettant d'obtenir et d'évaluer, d'une manière ob-jective, des preuves d'audit (3.4) afin de déterminersi les activités, événements, conditions, systèmes demanagement relatifs à l'environnement ou les infor-mations y afférant, sont en conformité avec les critè-res d'audit (3.3), et afin de communiquer les résultatsde ce processus au demandeur

[ISO 14010]

3.1.1 environmental management system audit systematic and documented verification process ofobjectively obtaining and evaluating audit evidence(3.4) to determine whether an organization's (1.4)environmental management system (2.1) conformswith the environmental management system audit cri-teria, and communicating the results of this process tothe client

[ISO 14011]

3.1.1 audit de système de management

environnemental processus de vérification systématique et documentépermettant d'obtenir et d'évaluer, d'une manière ob-jective, des preuves d'audit (3.4) afin de déterminersi le système de management environnemental(2.1) d'un organisme (1.4) est en conformité avec lescritères d'audit (3.3) du système de managementenvironnemental, et afin de communiquer les résultatsde ce processus au demandeur

[ISO 14011]

Page 18: ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

 

ISO 14050:2002(E/F)

8

3.1.2 environmental management system audit ⟨internal audit⟩ systematic and documented verifica-tion process of objectively obtaining and evaluatingevidence to determine whether an organization's(1.4) environmental management system (2.1) con-forms to the environmental management systemaudit criteria (3.3) set by the organization, and forcommunication of the results of this process to man-agement

[ISO 14001]

3.1.2 audit du système de management

environnemental ⟨audit interne⟩ processus de vérification systématiqueet documenté permettant d'obtenir et d'évaluer, d'unemanière objective, des preuves d'audit (3.4) afin dedéterminer si le système de management environ-nemental (2.1) d'un organisme (1.4) est en confor-mité avec les critères d'audit (3.3) du système demanagement environnemental définis par l'organ-isme, et afin de communiquer les résultats de ceprocessus à la direction

[ISO 14001]

3.2 subject matter specified environmental activity, event, condition,management system, and/or information about thesematters

[ISO 14010]

3.2 objet activité, événement, condition, système de manage-ment, relatifs à l'environnement et/ou informations yafférant

[ISO 14010]

3.3 audit criteria policies, practices, procedures or requirementsagainst which the auditor compares collected auditevidence (3.4) about the subject matter (3.2)

NOTE Requirements may include but are not limited tostandards, guidelines, specified organizational require-ments, and legislative or regulatory requirements

[ISO 14010]

3.3 critères d'audit politiques, pratiques, procédures ou exigences parrapport auxquelles l'auditeur compare les preuvesd'audit (3.4) réunies sur l'objet (3.2) audité

NOTE Les exigences peuvent inclure les normes, leslignes directrices, Ies exigences spécifiées sur l'organisationet les exigences légales ou réglementaires, mais ne sontpas limitées à cela.

[ISO 14010]

3.4 audit evidence verifiable information, records or statements of fact

NOTE 1 Audit evidence, which can be qualitative orquantitative, is used by the auditor to determine whetheraudit criteria (3.3) are met.

NOTE 2 Audit evidence is typically based on interviews,examination of documents, observation of activities andconditions, existing results of measurements and tests orother means within the scope of the audit.

[ISO 14010]

3.4 preuve d'audit information, enregistrement ou déclaration de faitsvérifiables

NOTE 1 La preuve d'audit, qui peut être qualitative ouquantitative, permet à I'auditeur de déterminer si les cri-tères d'audit (3.3) sont respectés.

NOTE 2 La preuve d'audit est en général basée sur desentrevues, sur l'examen de documents, l'observation desactivités et des conditions, sur les résultats existants demesurages, d'essais ou tout autre moyen dans les limitesdu champ de l'audit.

[ISO 14010]

Page 19: ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

 

ISO 14050:2002(E/F)

9

3.5 audit finding result of the evaluation of the collected audit evi-dence (3.4) compared against the agreed audit crite-ria (3.3)

NOTE The findings provide the basis for the auditreport.

[ISO 14010]

3.5 constat d'audit résultat de l'évaluation des preuves d'audit (3.4) ras-semblées et comparées aux critères d'audit (3.3)convenus

NOTE Le constat d'audit sert de base au rapportd'audit.

[ISO 14010]

3.6 audit conclusion professional judgement or opinion expressed by anauditor about the subject matter (3.2) of the audit,based on and limited to reasoning the auditor has ap-plied to audit findings (3.5)

[ISO 14010]

3.6 conclusion d'audit jugement ou avis professionnel porté ou exprimé parun auditeur sur l'objet (3.2) audité, et qui se baseuniquement sur le raisonnement que l'auditeur a ap-pliqué au constat d'audit (3.5)

[ISO 14010]

3.7 auditee organization (1.4) to be audited

[ISO 14010]

3.7 audité organisme (1.4) à auditer

[ISO 14010]

3.8 audit client client organization (1.4) commissioning the audit

NOTE 1 The client may be the auditee (3.7), or anyother organization which has the regulatory or contractualright to commission an audit.

[ISO 14010]

NOTE 2 In ISO 14010, the term “client” is used insteadof audit client.

3.8 demandeur de l'audit organisme (1.4) qui demande I'audit

NOTE Le demandeur peut être l'audité (3.7) ou toutautre organisme qui a capacité par réglementation ou parcontrat à demander un audit.

[ISO 14010]

3.9 audit team group of auditors, or a single auditor, designated toperform a given audit

NOTE 1 The audit team may also include technical ex-perts and auditors-in-training.

NOTE 2 One of the auditors on the audit team performsthe function of lead auditor.

NOTE 3 Adapted from ISO 14010.

3.9 équipe d'audit auditeur ou groupe d'auditeurs désigné(s) pour effec-tuer un audit donné

NOTE 1 L'équipe d'audit peut également inclure desexperts techniques et des auditeurs en formation.

NOTE 2 L'un des auditeurs de I'équipe d'audit assumeles fonctions de responsable de I'audit.

NOTE 3 Adaptée de l'ISO 14010.

3.9.1 environmental auditor person qualified to perform environmental audits(3.1)

[ISO 14010]

3.9.1 auditeur environnemental personne qualifiée pour réaliser des audits environ-nementaux (3.1)

[ISO 14010]

Page 20: ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

 

ISO 14050:2002(E/F)

10

3.9.2 lead environmental auditor person qualified to manage and perform environ-mental audits (3.1)

[ISO 14010]

3.9.2 responsable de l'audit environnemental personne qualifiée pour diriger et accomplir desaudits environnementaux (3.1)

[ISO 14010]

3.9.3 technical expert ⟨auditing⟩ person who provides specific knowledge orexpertise to the audit team (3.9), but who does notparticipate as an auditor

[ISO 14010]

3.9.3 expert technique ⟨audit⟩ personne qui apporte à l'équipe d'audit (3.9)ses connaissances spécifiques ou son expertise, maisqui n'y participe pas en tant qu'auditeur

[ISO 14010]

4 Terms relating to product system

4 Termes relatifs aux systèmes de produits

4.1 product system collection of materially and energetically connectedunit processes (4.3) which perform one or more de-fined functions

NOTE 1 For the purposes of life cycle assessment, theterm “product” used alone includes not only product sys-tems but can also include service systems.

NOTE 2 Adapted from ISO 14040.

4.1 système de produits ensemble de processus élémentaires (4.3) liés dupoint de vue matériel et énergétique et remplissantune ou plusieurs fonctions définies

NOTE 1 Dans le cadre de l'analyse du cycle de vie, leterme «produit» utilisé seul peut comprendre non seulementdes systèmes de produits mais également des systèmes deservice.

NOTE 2 Adaptée de l'ISO 14040.

4.2 product any goods or service

[ISO 14021]

4.2 produit tout bien ou service

[ISO 14021]

4.2.1 intermediate product input (4.12) to or output (4.13) from a unit process(4.3) which requires further transformation

[ISO 14041]

4.2.1 produit intermédiaire entrant (4.12) ou sortant (4.13) d'un processusélémentaire (4.3) qui nécessite une transformationultérieure

[ISO 14041]

4.2.2 co-product any of two or more products from the same unitprocess (4.3)

[ISO 14041]

4.2.2 coproduit l'un quelconque de deux produits ou plus issus dumême processus élémentaire (4.3)

[ISO 14041]

Page 21: ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

 

ISO 14050:2002(E/F)

11

4.2.3 packaging material that is used to protect or contain a product(4.2) during transportation, storage, marketing or use

NOTE 1 For the purposes of type II environmental label-ling, the term “packaging” also includes any item that isphysically attached to, or included with, a product or its con-tainer for the purpose of marketing the product or communi-cating information about the product.

NOTE 2 Adapted from ISO 14021.

4.2.3 emballage matériau utilisé pour protéger ou contenir un produit(4.2) pendant le transport, le stockage, la commer-cialisation ou l'utilisation

NOTE 1 Pour les besoins de l'étiquetage environnemen-tal de type II, le terme «emballage» inclut tout article qui estphysiquement relié à, ou compris avec, un produit ou sonconteneur aux fins de commercialiser le produit ou decommuniquer des informations à son sujet.

NOTE 2 Adaptée de l'ISO 14021.

4.2.4 final product product (4.2) which requires no additional trans-formation prior to its use

[ISO 14041]

4.2.4 produit final produit (4.2) qui ne nécessite pas de transformationultérieure avant son utilisation

[ISO 14041]

4.3 unit process smallest portion of a product system (4.1) for whichdata are collected when performing a life cycle as-sessment (5.3)

[ISO 14040]

4.3 processus élémentaire plus petite partie d'un système de produits (4.1)pour lequel les données sont recueillies lors de l'ana-lyse du cycle de vie (5.3)

[ISO 14040]

4.4 functional unit quantified performance of a product system (4.1) foruse as a reference unit in a life cycle assessment(5.3) study

[ISO 14040]

4.4 unité fonctionnelle performance quantifiée d'un système de produits(4.1) destinée à être utilisée comme unité de réfé-rence dans une analyse du cycle de vie (5.3)

[ISO 14040]

4.5 system boundary interface between a product system (4.1) and theenvironment (1.1) or other product systems

[ISO 14040]

4.5 frontière du système interface entre un système de produits (4.1) et l'en-vironnement (1.1) ou d'autres systèmes de produits

[ISO 14040]

4.6 allocation partitioning the input (4.12) or output (4.13) flowsof a unit process (4.3) to the product system (4.1)under study

[ISO 14040]

4.6 affectation imputation au système de produits (4.1) étudié desflux entrant (4.12) ou sortant (4.13) d'un processusélémentaire (4.3)

[ISO 14040]

Page 22: ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

 

ISO 14050:2002(E/F)

12

4.7 elementary flow ⟨input⟩ material or energy entering the system beingstudied, which has been drawn from the environment(1.1) without previous human transformation

NOTE Adapted from ISO 14040.

4.7 flux élémentaire ⟨entrant⟩ matière ou énergie entrant dans le systèmeétudié et puisée dans l'environnement (1.1) sanstransformation humaine préalable

NOTE Adaptée de l'ISO 14040.

4.8 elementary flow ⟨output⟩ material or energy leaving the system beingstudied, which is discarded into the environment(1.1) without subsequent human transformation

NOTE Adapted from ISO 14040.

4.8 flux élémentaire ⟨sortant⟩ matière ou énergie sortant du système étu-dié et rejetée dans l'environnement (1.1) sans trans-formation humaine ultérieure

NOTE Adaptée de l'ISO 14040.

4.9 raw material primary or secondary material that is used to producea product (4.2)

[ISO 14040]

4.9 matière première matière première ou secondaire utilisée pour réaliserun produit (4.2)

[ISO 14040]

4.10 energy flow input (4.12) to or output (4.13) from a unit process(4.3) or product system (4.1), quantified in energyunits

NOTE Energy flow that is input may be called energyinput; energy flow that is output may be called energy out-put.

[ISO 14041]

4.10 flux énergétique entrant (4.12) ou sortant (4.13) d'un processusélémentaire (4.3) ou d'un système de produits(4.1), exprimé en unités d'énergie

NOTE Le flux énergétique en entrée peut être appeléénergie entrante; le flux énergétique en sortie peut être ap-pelé énergie sortante.

[ISO 14041]

4.10.1 feedstock energy heat of combustion of raw material inputs, which arenot used as an energy source, to a product system(4.1)

NOTE It is expressed in terms of higher heating valueor lower heating value.

[ISO 14041]

4.10.1 énergie d'alimentation chaleur apportée à un système de produits (4.1) parla combustion des matières premières qui ne sont pasutilisées comme source d'énergie

NOTE Elle est exprimée en termes de pouvoir calori-fique ou pouvoir calorifique inférieur.

[ISO 14041]

4.10.2 process energy energy input required for a unit process (4.3) tooperate the process or equipment within the process,excluding energy inputs for production and delivery ofthis energy

[ISO 14041]

4.10.2 énergie de processus apport d'énergie nécessaire dans un processus élé-mentaire (4.3) pour mettre en œuvre le processus oufaire fonctionner l'équipement correspondant, à l'ex-clusion des entrants énergétiques de production et delivraison de cette énergie

[ISO 14041]

Page 23: ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

 

ISO 14050:2002(E/F)

13

4.11 reference flow measure of the needed outputs (4.13) from proc-esses in a given product system (4.1) required to ful-fil the function expressed by the functional unit (4.4)

[ISO 14041]

4.11 flux de référence mesure des sortants (4.13) nécessaires des proces-sus, dans un système de produits (4.1) donné, pourremplir la fonction telle qu'elle est exprimée par l'unitéfonctionnelle (4.4)

[ISO 14041]

4.12 input material or energy which enters a unit process (4.3)

NOTE Materials may include raw materials (4.9) andproducts (4.2).

[ISO 14040]

4.12 entrant matière ou énergie entrant dans un processus élé-mentaire (4.3)

NOTE Les matières peuvent comprendre des ma-tières premières (4.9) et des produits (4.2).

[ISO 14040]

4.12.1 ancillary input material input that is used by the unit process (4.3)producing the product, but does not constitute a partof the product

EXAMPLE A catalyst.

[ISO 14041]

4.12.1 entrant auxiliaire matériau entrant dans le processus élémentaire(4.3), mais ne faisant pas partie du produit

EXEMPLE Un catalyseur.

[ISO 14041]

4.13 output material or energy which leaves a unit process (4.3)

NOTE Materials may include raw materials (4.9), in-termediate products (4.2.1), products (4.2), emissionsand waste (1.9).

[ISO 14040]

4.13 sortant matière ou énergie sortant d'un processus élémen-taire (4.3)

NOTE Les matières peuvent comprendre des ma-tières premières (4.9), des produits intermédiaires(4.2.1), des produits (4.2), des rejets et des déchets (1.9).

[ISO 14040]

4.13.1 fugitive emission uncontrolled emission to air, water or land

EXAMPLE Material released from a pipeline coupling.

[ISO 14041]

4.13.1 émission fugitive émission non maîtrisée dans l'air, l'eau ou le sol

EXEMPLE Un matériau qui s'échappe d'un raccord deconduit.

[ISO 14041]

5 Terms relating to life cycle assessment

5 Termes relatifs à l'analyse du cycle de vie

5.1 life cycle consecutive and interlinked stages of a product sys-tem (4.1), from raw material acquisition or generationof natural resources to the final disposal

[ISO 14040]

5.1 cycle de vie phases consécutives et liées d'un système de pro-duits (4.1), de l'acquisition des matières premières oude la génération des ressources naturelles à l'élimina-tion finale

[ISO 14040]

Page 24: ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

 

ISO 14050:2002(E/F)

14

5.2 practitioner individual or group that conducts a life cycle as-sessment (5.3)

[ISO 14040]

5.2 réalisateur individu ou groupe qui réalise une analyse du cyclede vie (5.3)

[ISO 14040]

5.3 life cycle assessment LCA compilation and evaluation of the inputs (4.12), out-puts (4.13) and the potential environmental impacts(1.3) of a product system (4.1) throughout its lifecycle (5.1)

[ISO 14040]

5.3 analyse du cycle de vie ACV compilation et évaluation des entrants (4.12) et dessortants (4.13), ainsi que des impacts environne-mentaux (1.3) potentiels d'un système de produits(4.1) au cours de son cycle de vie (5.1)

[ISO 14040]

5.3.1 life cycle inventory analysis phase of life cycle assessment (5.3) involving thecompilation and quantification of inputs (4.12) andoutputs (4.13), for a given product system (4.1)throughout its life cycle (5.1)

[ISO 14040]

5.3.1 analyse de l'inventaire du cycle de vie phase de l'analyse du cycle de vie (5.3) impliquantla compilation et la quantification des entrants (4.12)et des sortants (4.13), pour un système de produits(4.1) donné au cours de son cycle de vie (5.1)

[ISO 14040]

5.3.1.1 life cycle inventory result LCI result outcome of a life cycle inventory analysis (5.3.1)that includes flows crossing the system boundary(4.5) and provides the starting point for life cycle im-pact assessment (5.3.2)

[ISO 14042]

5.3.1.1 résultat de l'inventaire du cycle de vie données produites par une analyse de l'inventairedu cycle de vie (5.3.1) qui comprennent les fluxtraversant les frontières du système (4.5) et fournis-sent le point de départ pour l'évaluation de l'impactdu cycle de vie (5.3.2)

[ISO 14042]

5.3.1.2 data quality characteristic of data that bears on their ability tosatisfy stated requirements

[ISO 14041]

5.3.1.2 qualité des données caractéristique des données pouvant répondre auxexigences requises

[ISO 14041]

5.3.1.3 uncertainty analysis systematic procedure to ascertain and quantify theuncertainty introduced into the results of a life cycleinventory analysis (5.3.1), due to the cumulative ef-fects of input uncertainty and data variability

NOTE Either ranges or probability distributions areused to determine the uncertainty in the results.

[ISO 14041]

5.3.1.3 analyse d'incertitude procédure systématique permettant de rechercher,puis de quantifier, l'incertitude introduite dans les ré-sultats d'une analyse de l'inventaire du cycle de vie(5.3.1) par les effets cumulés de l'incertitude sur lesentrants et de la variabilité des données

NOTE Cette analyse de l'incertitude se fonde soit surdes plages, soit sur des lois de probabilité.

[ISO 14041]

Page 25: ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

 

ISO 14050:2002(E/F)

15

5.3.1.4 sensitivity analysis systematic procedure for estimating the effects on theoutcome of a study of the chosen methods and data

[ISO 14041]

5.3.1.4 analyse de sensibilité procédure systématique d'estimation des effets surles résultats des méthodes et des données choisies

[ISO 14041]

5.3.2 life cycle impact assessment LCIA phase of life cycle assessment (5.3) aimed at un-derstanding and evaluating the magnitude and signifi-cance of the potential environmental impacts (1.3)of a product system (4.1)

[ISO 14040]

5.3.2 évaluation de l'impact du cycle de vie phase de l'analyse du cycle de vie (5.3) destinée àcomprendre et, évaluer l'ampleur et l'importance desimpacts environnementaux (1.3) potentiels d'unsystème de produits (4.1)

[ISO 14040]

5.3.2.1 impact category class representing environmental issues of concerninto which LCI results (5.3.1.1) may be assigned

[ISO 14042]

5.3.2.1 catégorie d'impact classe représentant les points environnementaux étu-diés dans laquelle les résultats de l'inventaire ducycle de vie (5.3.1.1) peuvent être affectés

[ISO 14042]

5.3.2.1.1 life cycle impact category indicator quantifiable representation of an impact category(5.3.2.1)

[ISO 14042]

5.3.2.1.1 indicateur de catégorie d'impact du cycle

de vie représentation quantifiable d'une catégorie d'impact(5.3.2.1)

[ISO 14042]

5.3.2.2 characterization factor factor derived from a model which is applied to con-vert LCI results (5.3.1.1) to the common unit of thelife cycle impact category indicator (5.3.2.1.1)

[ISO 14042]

5.3.2.2 facteur de caractérisation facteur établi à partir d'un modèle de caractérisationqui est utilisé pour convertir les résultats de l'inven-taire du cycle de vie (5.3.1.1) en unité communed'indicateur de catégorie d'impact du cycle de vie(5.3.2.1.1)

[ISO 14042]

5.3.2.3 environmental mechanism system of physical, chemical and biological processesfor a given impact category (5.3.2.1), linking LCIresults (5.3.1.1) to category indicators (5.3.2.1.1)and category endpoints (5.3.2.4)

[ISO 14042]

5.3.2.3 mécanisme environnemental ensemble de processus chimiques, biologiques etphysiques pour une catégorie d'impact (5.3.2.1)donnée, reliant les résultats de l'inventaire du cyclede vie (5.3.1.1) aux indicateurs de catégorie d'im-pact du cycle de vie (5.3.2.1.1) et aux impactsfinals par catégorie (5.3.2.4)

[ISO 14042]

5.3.2.4 category endpoint attribute or aspect of natural environment, humanhealth or resources, identifying an environmentalissue of concern

[ISO 14042]

5.3.2.4 impact final par catégorie attribut ou aspect de l'environnement naturel, de lasanté humaine ou des ressources, permettant d'iden-tifier un point environnemental à problème

[ISO 14042]

Page 26: ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

 

ISO 14050:2002(E/F)

16

5.3.3 life cycle interpretation phase of life cycle assessment (5.3) in which thefindings of either the inventory analysis or the impactassessment, or both, are combined consistent withthe defined goal and scope in order to reach conclu-sions and recommendations

[ISO 14040]

5.3.3 interprétation du cycle de vie phase de l'analyse du cycle de vie (5.3) au cours delaquelle les résultats de l'analyse de l'inventaire ou del'évaluation de l'impact, ou des deux, sont combinésen cohérence avec l'objectif et le champ définis pourl'étude afin de dégager des conclusions et desrecommandations

[ISO 14040]

5.3.3.1 consistency check process of verifying that the assumptions, methodsand data are consistently applied throughout the studyand in accordance with the goal and scope definition

NOTE The consistency check should be performedbefore conclusions are reached.

[ISO 14043]

5.3.3.1 contrôle de cohérence procédé permettant de vérifier que les hypothèses,les méthodes et les données sont appliquées demanière cohérente tout au long de l'étude et confor-mément à la définition de l'objectif et du champ del'étude

NOTE Il convient que le contrôle de cohérence soit faitavant d'arriver aux conclusions.

[ISO 14043]

5.3.3.2 sensitivity check process of verifying that information obtained from asensitivity analysis (5.3.1.4) is relevant for reachingthe conclusions and giving recommendations

[ISO 14043]

5.3.3.2 contrôle de sensibilité procédé permettant de vérifier que les informationsobtenues à partir d'une analyse de sensibilité(5.3.1.4) sont pertinentes pour établir des conclusionset donner des recommandations

[ISO 14043]

5.3.3.3 completeness check process of verifying whether information from the pre-ceding phases of an life cycle assessment (5.3) orlife cycle inventory analysis (5.3.1) is sufficient forreaching conclusions in accordance with the goal andscope definition

[ISO 14043]

5.3.3.3 contrôle de complétude procédé permettant de vérifier si les informations desphases précédentes d'une analyse de cycle de vie(5.3) ou d'une analyse de l'inventaire du cycle devie (5.3.1) suffisent pour arriver à des conclusions,conformément à la définition de l'objectif et du champde l'étude

[ISO 14043]

5.3.4 comparative assertion environmental claim regarding the superiority orequivalence of one product versus a competing prod-uct which performs the same function

[ISO 14040]

5.3.4 affirmation comparative déclaration relative à la supériorité ou à l'équivalenceen matière d'environnement d'un produit par rapport àun produit concurrent qui remplit la même fonction

[ISO 14040]

Page 27: ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

 

ISO 14050:2002(E/F)

17

6 Terms relating to environmental labelling and declarations

6 Termes relatifs aux marquages et aux déclarations environnementaux

6.1 environmental claim statement, symbol or graphic that indicates an envi-ronmental aspect (1.2) of a product (4.2), a compo-nent or packaging (4.2.3)

NOTE An environmental claim may be made on prod-uct or packaging labels, through product literature, technicalbulletins, advertising, publicity, telemarketing, as well asthrough digital or electronic media such as the Internet.

[ISO 14021]

6.1 déclaration environnementale affirmation, symbole ou graphique qui indique unaspect environnemental (1.2) d'un produit (4.2),d'un composant ou d'un emballage (4.2.3)

NOTE Une déclaration environnementale peut ap-paraître sur les étiquettes du produit ou de l'emballage,sous forme de documentation relative au produit, de bulle-tins techniques, de publications, de publicité, de télémarket-ing ainsi que par le biais de supports numériques ouélectroniques tels l'Internet.

[ISO 14021]

6.1.1 environmental label environmental declaration claim which indicates the environmental aspects(1.2) of a product (4.2) or service

[ISO 14020]

6.1.1 étiquette environnementale déclaration environnementale revendication indiquant les aspects environnemen-taux (1.2) d'un produit (4.2) ou d'un service

[ISO 14020]

6.1.2 qualified environmental claim environmental claim (6.1) which is accompanied byan explanatory statement (6.1.4) that describes thelimits of the claim

[ISO 14021]

6.1.2 déclaration environnementale restreinte déclaration environnementale (6.1) qui est accom-pagnée d'une déclaration explicative (6.1.4) dé-crivant les limites de l'affirmation

[ISO 14021]

6.1.3 environmental claim verification confirmation of the validity of an environmental claim(6.1) using specific predetermined criteria and proce-dures with assurance of data reliability

[ISO 14021]

6.1.3 vérification de déclaration

environnementale confirmation de la validité d'une déclaration envi-ronnementale (6.1) en utilisant les critères et lesprocédures prédéterminés spécifiques avec la garan-tie de la fiabilité des données

[ISO 14021]

6.1.4 explanatory statement any explanation which is needed or given so that anenvironmental claim (6.1) can be properly under-stood by a purchaser, potential purchaser or user ofthe product (4.2)

[ISO 14021]

6.1.4 déclaration explicative toute explication nécessaire pour qu'une déclarationenvironnementale (6.1) puisse être correctementcomprise par un acheteur, un acheteur potentiel ou unutilisateur du produit (4.2)

[ISO 14021]

Page 28: ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

 

ISO 14050:2002(E/F)

18

6.2 type I environmental labelling programme voluntary, multiple-criteria-based, third party pro-gramme that awards a licence which authorizes theuse of environmental labels (6.1.1) on products(4.2) indicating overall environmental preferability of aproduct within a particular product category (6.2.1)based on life cycle (5.1) considerations

[ISO 14024]

6.2 programme de label environnemental

de type I programme volontaire, basé sur de multiples critèreset engageant une tierce partie, consistant à attribuerune licence qui autorise l'utilisation d'étiquettes envi-ronnementales (6.1.1) sur les produits (4.2) in-diquant qu'un produit particulier est préférable pourl'environnement, dans le cadre d'une catégorie deproduit (6.2.1) donnée et en fonction de considéra-tions ayant trait au cycle de vie (5.1)

[ISO 14024]

6.2.1 product category group of products (4.2) which have equivalent func-tion

[ISO 14024]

6.2.1 catégorie de produit groupes de produits (4.2) ayant une fonction équiva-lente

[ISO 14024]

6.2.1.1 fitness for purpose ability of a product, process or service to serve a de-fined purpose under specific conditions

[ISO 14024]

6.2.1.1 aptitude à l'emploi aptitude d'un produit, d'un processus ou d'un serviceà remplir un emploi défini dans des conditions spéci-fiées

[ISO 14024]

6.2.1.2 product function characteristic attribute or characteristic in the performance and useof a product (4.2)

[ISO 14024]

6.2.1.2 caractéristique fonctionnelle du produit attribut ou caractéristique concernant les perform-ances et l'utilisation d'un produit (4.2)

[ISO 14024]

6.2.1.3 product environmental criteria environmental requirements that the product (4.2)shall meet in order to be awarded an environmentallabel (6.1.1)

[ISO 14024]

6.2.1.3 critères environnementaux du produit exigences environnementales auxquelles le produit(4.2) doit être conforme pour obtenir une étiquetteenvironnementale (6.1.1)

[ISO 14024]

6.2.2 ecolabelling body third party body, and its agents, which conducts atype I environmental labelling programme (6.2)

[ISO 14024]

6.2.2 organisme de délivrance de l'écolabel tierce partie, et ses agents, qui conduisent un pro-gramme de label environnemental de type I (6.2)

[ISO 14024]

Page 29: ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

 

ISO 14050:2002(E/F)

19

6.3 self-declared environmental claim environmental claim (6.1) that is made, without in-dependent third-party certification, by manufacturers,importers, distributors, retailers or anyone else likelyto benefit from such a claim

[ISO 14021]

NOTE This is also called “type II environmental label-ling”.

6.3 autodéclaration environnementale déclaration environnementale (6.1) effectuée sanscertification par une tierce partie indépendante, pardes fabricants, des importateurs, des distributeurs,des détaillants ou toute autre entité susceptible detirer profit de cette déclaration

[ISO 14021]

NOTE Cela est également appelé «étiquetage detype II».

6.4 type III environmental declaration quantified environmental data for a product with pre-set categories of parameters based on the ISO 14040series of standards, but not excluding additionalenvironmental information provided with a type IIIenvironmental declaration programme

[ISO/TR 14025]

6.4 déclaration environnementale de type III données environnementales quantifiées pour un pro-duit avec des catégories prédéterminées de pa-ramètres basées sur la série de normes ISO 14040,sans exclure pour autant les informations environne-mentales fournies dans le cadre d'un programme dedéclarations environnementales de type III

[ISO/TR 14025]

6.4.1 type III environmental declaration

programme voluntary process by which an industrial sector or in-dependent body develops a type III environmentaldeclaration, including setting minimum requirements,selecting categories of parameters, defining the in-volvement of third parties and the format of externalcommunications

[ISO/TR 14025]

6.4.1 programme de déclarations

environnementales de type III processus volontaire par lequel un secteur industrielou un organisme indépendant développe une déclara-tion environnementale de type III, en incluant des cri-tères de détermination minimaux, en sélectionnantdes catégories de paramètres et en définissant la par-ticipation de tierces parties et le format des communi-cations externes

[ISO/TR 14025]

6.5 upgradability characteristic of a product (4.2) that allows its mod-ules or parts to be separately upgraded or replacedwithout having to replace the entire product

[ISO 14021]

6.5 aptitude à l'évolution caractéristique d'un produit (4.2) permettant uneamélioration ou un remplacement indépendants deses modules ou de ses éléments sans devoir êtreremplacé dans son intégralité

[ISO 14021]

6.6 material identification words, numbers or symbols used to designate com-position of components of a product (4.2) or packag-ing (4.2.3)

NOTE A material identification symbol is not consid-ered to be an environmental claim (6.1).

[ISO 14021]

6.6 identification des matériaux termes, nombres ou symboles utilisés pour désignerla composition des composants d'un produit (4.2) oud'un emballage (4.2.3)

NOTE Un symbole d'identification des matériaux n'estpas considéré comme une déclaration environnementale(6.1).

[ISO 14021]

Page 30: ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

 

ISO 14050:2002(E/F)

20

Annex A (informative)

Additional terms and definitions

from Technical Report ISO/TR 14061

Annexe A (informative)

Termes et définitions

supplémentaires tirés du Rapport technique ISO/TR 14061

A.1 forest generally considered to be a plant community of pre-dominantly trees and other woody vegetation growingtogether, its land, flora and fauna, their interrelation-ships, and the resources and values attributed to it

NOTE Forests vary greatly around the world depend-ing on the climate, soil, history and culture of the countryinvolved. Many countries have a definition of forest includedin legislation.

A.1 forêt généralement définie comme un groupement végétalà prédominance d'arbres et autre végétation boiséecroissant ensemble, la terre, la flore et la faune qui s'yrapportent, leurs relations d'interdépendance et lesressources et valeurs qui lui sont attribuées

NOTE À l'échelle mondiale, les forêts varient con-sidérablement en fonction du climat, de la nature des sols,de l'histoire et de la culture du pays concerné. De nombreuxpays ont inclus leur propre définition du terme «forêt» dansleur législation nationale.

A.2 principles, criteria and indicators international, national and private sector initiatives,whether governmental or non-governmental, providea common hierarchical framework including “Princi-ples, criteria and indicators” for evaluating progresstowards achieving SFM

NOTE 1 In some initiatives, the principles are consideredto be included in the criteria.

NOTE 2 For the purposes of this report, the term “Crite-ria & Indicators” is used specifically in reference to the setsof Criteria & Indicators of Sustainable Forest Managementdeveloped through the intergovernmental processes.

A.2 principes, critères et indicateurs les initiatives internationales, nationales ou du secteurprivé, gouvernementales ou non gouvernementales,fournissent un cadre hiérarchique commun com-prenant des «principes, critères et indicateurs» pourévaluer les progrès accomplis en vue de réaliserl'AFD

NOTE 1 Dans certaines initiatives, les principes sontconsidérés comme étant inclus dans les critères.

NOTE 2 Pour les besoins du présent Rapport technique,le terme «critères et indicateurs» est employé spécifique-ment en référence aux ensembles de critères et d'indi-cateurs d'aménagement forestier durable issus deprocessus intergouvernementaux.

A.3 principles fundamental rules which serve as a basis for reason-ing and action

NOTE Principles are explicit elements of a goal suchas SFM.

A.3 principes règles fondamentales qui servent de base au raison-nement et à l'action

NOTE Les principes sont les éléments explicites d'unbut tel que l'AFD.

Page 31: ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

 

ISO 14050:2002(E/F)

21

A.4 criteria characteristics that are considered important and bywhich success or failure can be judged

NOTE The role of criteria is to characterize or definethe essential elements or set of conditions or processes bywhich sustainable forest management may be assessed.

[Source: Intergovernmental Seminar on Criteria andIndicators for SFM (ISCI)]

A.4 critères caractéristiques considérées comme importantes etpermettant de juger de la réussite ou de l'échec

NOTE Le rôle des critères est de caractériser ou dedéfinir les éléments essentiels ou ensembles de conditionsou de processus à l'aide desquels l'aménagement forestierdurable peut être évalué.

[Source: Séminaire intergouvernemental sur les cri-tères et indicateurs d'AFD (ISCI)]

A.5 indicators quantitative, qualitative or descriptive measures thatwhen periodically evaluated and monitored show thedirection of change

[Source: Intergovernmental Seminar on Criteria andIndicators for SFM (ISCI)]

A.5 indicateurs mesures quantitatives, qualitatives ou descriptivesqui, lorsqu'elles sont évaluées et surveillées pério-diquement, indiquent le sens des changements

[Source: Séminaire intergouvernemental sur les cri-tères et indicateurs d'AFD (ISCI)]

A.6 sustainable development meeting the needs of the present without compromis-ing the ability of future generations to meet their ownneeds

[Source: The Brundtland Report]

A.6 développement durable permet de répondre aux besoins présents sans entra-ver la capacité des générations futures à répondre àleurs propres besoins

[Source: Rapport Brundtland]

A.7 sustainable forest management NOTE While there is broad agreement on the conceptof SFM, there are variations in the definitions developedthrough the various national and international initiatives.Two definitions of SFM have been included here so that theuser of this Technical Report can understand the scope ofthe concept and the ways it has been defined by peoplefrom two different regions of the world.

A.7 aménagement forestier durable NOTE Bien que le concept d'AFD soit largementaccepté, il existe des différences dans les définitions élabo-rées par les différentes initiatives nationales et interna-tionales. Deux définitions de l'AFD sont présentées ci-aprèsafin de faciliter la compréhension du domaine d'applicationdu concept et la manière dont il a été défini par des per-sonnes originaires de différents pays du monde.

A.7.1 sustainable forest management SFM process of managing permanent forest land toachieve one or more clearly specified objectives ofmanagement with regard to the production of a con-tinuous flow of desired forest products and services,without undue reduction of its inherent values andfuture productivity and without undue undesirableeffects on the physical and social environment

[Source: International Tropical Timber Organization(ITT0)]

A.7.1 aménagement forestier durable AFD processus d'aménagement de terres forestières per-manentes permettant d'atteindre un ou plusieurs ob-jectifs clairement spécifiés de gestion, pour ce qui estde la production d'un flux continu de produits et ser-vices forestiers souhaités, sans réduction abusive deses valeurs inhérentes et de la productivité future, etsans effets indésirables sur l'environnement physiqueet social

[Source: Organisation internationale des bois tropi-caux (OIBT)]

Page 32: ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

 

ISO 14050:2002(E/F)

22

A.7.2 sustainable forest management SFM stewardship and use of forests (A.1) and forest landin a way and at a rate that maintains their biodiversity,productivity, regeneration capacity, vitality and theirpotential to fulfil, now and in the future, relevant eco-logical, economic and social functions, at local, na-tional and global levels and does not cause damageto other ecosystems

[Source: Pan-European (Helsinki) Process]

A.7.2 aménagement forestier durable AFD intendance et utilisation de forêts (A.1) et de terresforestières d'une façon, et à un rythme, qui maintien-nent leur diversité biologique, leur productivité, leurcapacité de régénération, leur vitalité et leur potentielà remplir, actuellement et à l'avenir, les fonctionsécologiques, économiques et sociales correspon-dantes, au niveau local, national et mondial, et quin'entraînent pas de dommages sur les autres éco-systèmes

[Source: Processus paneuropéen (d'Helsinki)]

Page 33: ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

 

ISO 14050:2002(E/F)

23

Annex B (informative)

Additional concepts encountered in the international environmental

community

Annexe B (informative)

Notions additionnelles rencontrées

dans la communauté environnementale internationale

B.1 Best Available Technique (BAT)

B.1 Les meilleures techniques disponibles (MTD)

[1] EU Directive 96/61/EEC (September 24, 1996)concerning Integrated Pollution Preventionand Control, Article 2(11).

[2] OECD Council Recommendation, May 1972,Environment and Economics, Guiding princi-ples concerning international economic as-pects of environmental policies.

[3] Convention on the Protection of the MarineEnvironment of the North East Atlantic. Paris22 September 1992, Article 2, clause 3 (b) andamendment No. 1.

[1] Directive de l'Union Européenne 96/61/EEC(24 septembre 1996) relative à la préventionet à la réduction intégrées de la pollution, arti-cle 2(11).

[2] Recommandation du Conseil de l'OCDE surles principes directeurs relatifs aux aspectséconomiques des politiques de l'environne-ment sur le plan international (mai 1972).

[3] Convention pour la protection du milieu marinde l'Atlantique du Nord-Est. Paris, 22 septem-bre 1992. Article 2, paragraphe 3 (b) et amen-dement nº 1.

B.2 Critical load

B.2 Charge critique

[1] DOWING, R.J., HETTELINGH, J.-P. and DE SMET,P.A.M., 1993. Calculation and Mapping CriticalLoads in Europe. Status Report 1993.

[1] DOWING, R.J., HETTELINGH, J.-P. et DE SMET,P.A.M., 1993. Calculation and Mapping CriticalLoads in Europe. Status Report 1993.

B.3 Precautionary principle

B.3 Principe de précaution

[1] ISO 14004:1996, Environmental managementsystems — General guidelines on principles,systems and supporting techniques, Annex A,principle No. 15.

[2] The Rio Declaration on Environment and De-velopment, principle No. 15.

[3] Convention on the Protection of the MarineEnvironment of the North East Atlantic. Paris,22 September 1992. Article 2, clause 2 (a).

[1] ISO 14004:1996, Systèmes de managementenvironnemental — Lignes directrices gé-nérales concernant les principes, les systèmeset les techniques de mise en œuvre, an-nexe A, principe nº 15.

[2] La Déclaration de Rio sur l'environnement etle développement, principe nº 15.

[3] Convention pour la protection du milieu marinde l'Atlantique du Nord-Est. Paris, 22 septem-bre 1992. Article 2, paragraphe 2 (a).

Page 34: ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

 

ISO 14050:2002(E/F)

24

B.4 “Polluter pays” principle B.4 Principe «pollueur-payeur»

[1] ISO 14004:1996, Environmental managementsystems — General guidelines on principles,systems and supporting techniques, Annex A,principle No. 16.

[2] The Rio Declaration on Environment and De-velopment, principle No. 16.

[3] Convention on the Protection of the MarineEnvironment of the North East Atlantic. Paris,22 September 1992. Article 2, clause 2 (b).

[4] The Polluter Pays Principle, OECD 1975.

[1] ISO 14004:1996, Systèmes de managementenvironnemental — Lignes directrices gé-nérales concernant les principes, les systèmeset les techniques de mise en œuvre, an-nexe A, principe nº 16.

[2] La Déclaration de Rio sur l'environnement etle développement, principe nº 16.

[3] Convention pour la protection du milieu marinde l'Atlantique du Nord-Est. Paris, 22 septem-bre 1992. Article 2, paragraphe 2 (b).

[4] Le Principe Pollueur-Payeur, OECD 1975.

B.5 Pollution

B.5 Pollution

[1] EU Directive 96/61/EEC (September 24, 1996)concerning Integrated Pollution Preventionand Control, Article 2(11).

[2] IMO/UNESCO/WMO/IAEA/UN/UNEP JointGroup of experts on the Scientific Aspects ofMarine Pollution (GESAMP).

[3] Convention on the Protection of the MarineEnvironment in the North East Atlantic. Paris,22 September 1992. Article 1, clause (d).

[4] Convention on the Protection of the MarineEnvironment of the Baltic Sea Area, 1992,(Helsinki Convention), Article 2, clause 1.

[1] Directive de l'Union Européenne 96/61/EEC(24 septembre 1996) relative à la préventionet à la réduction intégrées de la pollution, arti-cle 2(11).

[2] IMO/UNESCO/WMO/IAEA/UN/UNEP JointGroup of experts on the Scientific Aspects ofMarine Pollution (GESAMP)

[3] Convention pour la protection du milieu marinde l'Atlantique du Nord-Est. Paris, 22 septem-bre 1992. Article 1, paragraphe (d).

[4] Convention sur la protection de l'environne-ment marin dans la mer Baltique (Conventiond'Helsinki), 1992, Article 2, paragraphe 1.

B.6 Sustainable development

B.6 Développement durable

[1] “Our Common Future”: Report published bythe World Commission on Environment andthe Development (the Brundtland Report).

[2] “Sustainable America: A New Consensus forProsperity, Opportunity, and Health Environ-ment for the Future”: The President's Councilon Sustainable Development, February 1996.

[3] Towards Sustainability: A European Pro-gramme of Policy and Action in relation to theEnvironment and Sustainable Development.EU, Vol. II, 27 March 1992.

[1] «Our Common Future». Report published bythe World Commission on Environment andthe Development (the Brundtland Report).

[2] «Sustainable America: A New Consensus forProsperity, Opportunity, and Health Environ-ment for the Future». The President's Councilon Sustainable Development, February 1996.

[3] Vers un développement durable: Un pro-gramme européen politique et opérationnel re-latif à l'environnement et au développementdurable. UE, vol. II, 27 mars 1992.

Page 35: ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

 

ISO 14050:2002(E/F)

25

Bibliography Bibliographie

[1] ISO 10241:1992, International terminologystandards — Preparation and layout

[2] ISO/IEC Guide 2:1996, Standardization andrelated activities — General vocabulary

[3] ISO 10241:1992, Normes terminologiques in-ternationales — Élaboration et présentation

[4] ISO/CEI Guide 2:1996, Normalisation et activi-tés connexes — Vocabulaire général

Page 36: ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

 

ISO 14050:2002(E/F)

26

Alphabetical index

A

allocation 4.6 ancillary input 4.12.1 audit client 3.8 audit conclusion 3.6 audit criteria 3.3 audit evidence 3.4 audit finding 3.5 audit team 3.9 auditee 3.7

B

BAT B.1 best available technique B.1

C

category endpoint 5.3.2.4 category indicator 5.3.2.1.1 certification 1.7 characterization factor 5.3.2.2 client 3.8 comparative assertion 5.3.4 completeness check 5.3.3.3 consistency check 5.3.3.1 continual improvement 2.1.4 co-product 4.2.2 criteria A.4 critical load B.2

D

data quality 5.3.1.2

E

ECI 1.11.1.2 ecolabelling body 6.2.2 elementary flow 4.7, 4.8 EMS 2.1 energy flow 4.10 environment 1.1 environmental aspect 1.2 environmental audit 3.1 environmental auditor 3.9.1 environmental claim 6.1 environmental claim

verification 6.1.3 environmental condition

indicator 1.11.1.2 environmental declaration 6.1.1 environmental impact 1.3 environmental label 6.1.1 environmental management

system 2.1

environmental management system audit 3.1.1

environmental management system audit 3.1.2

environmental mechanism 5.3.2.3 environmental objective 2.1.2 environmental performance 1.11 environmental performance 2.1.5 environmental performance

criterion 1.11.1.1 environmental performance

evaluation 1.11.1 environmental performance

indicator 1.11.1.3 environmental policy 2.1.1 environmental target 2.1.3 EPE 1.11.1 EPI 1.11.1.3 explanatory statement 6.1.4

F

feedstock energy 4.10.1 final product 4.2.4 fitness for purpose 6.2.1.1 forest A.1 fugitive emission 4.13.1 functional unit 4.4

I

impact category 5.3.2.1 indicators A.5 input 4.12 interested party 1.5 intermediate product 4.2.1

L

LCA 5.3 LCIA 5.3.2 LCI results 5.3.1.1 lead environmental auditor 3.9.2 life cycle 5.1 life cycle assessment 5.3 life cycle impact assessment 5.3.2 life cycle impact category

indicator 5.3.2.1.1 life cycle interpretation 5.3.3 life cycle inventory analysis 5.3.1 life cycle inventory result 5.3.1.1

M

management performance indicator 1.11.1.3.1

material identification 6.6 MPI 1.11.1.3.1

O

operational performance indicator 1.11.1.3.2

OPI 1.11.1.3.2 organization 1.4 output 4.13

P

packaging 4.2.3 “polluter pays” principle B.4 pollution B.5 practitioner 5.2 precautionary principle B.3 prevention of pollution 1.8 principles A.3 principles, criteria and

indicators A.2 process energy 4.10.2 product 4.2 product category 6.2.1 product environmental

criteria 6.2.1.3 product function

characteristic 6.2.1.2 product system 4.1

Q

qualified environmental claim 6.1.2

R

raw material 4.9 reference flow 4.11

S

self-declared environmental claim 6.3

sensitivity analysis 5.3.1.4 sensitivity check 5.3.3.2 subject matter 3.2 sustainable development A.6 sustainable development B.6 sustainable forest

management A.7 sustainable forest management

(SFM) A.7.1 sustainable forest management

(SFM) A.7.2 system boundary 4.5

T

technical expert 3.9.3 third party 1.6

Page 37: ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

 

ISO 14050:2002(E/F)

27

transparency 1.10 type I environmental labelling

programme 6.2 type II environmental labelling 6.3 type III environmental

declaration 6.4 type III environmental declaration

programme 6.4.1

U

uncertainty analysis 5.3.1.3 unit process 4.3 upgradability 6.5

W

waste 1.9

Page 38: ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

 

ISO 14050:2002(E/F)

28

Index alphabétique

A

ACV 5.3 AFD A.7.1, A.7.2 affectation 4.6 affirmation comparative 5.3.4 amélioration continue 2.1.4 aménagement forestier

durable A.7, A.7.1, A.7.2 analyse de l'inventaire du cycle de

vie 5.3.1 analyse de sensibilité 5.3.1.4 analyse d'incertitude 5.3.1.3 analyse du cycle de vie 5.3 aptitude à l'emploi 6.2.1.1 aptitude à l'évolution 6.5 aspect environnemental 1.2 audit de système de management

environnemental 3.1.1 audit du système de management

environnemental 3.1.2 audit environnemental 3.1 audité 3.7 auditeur environnemental 3.9.1 autodéclaration

environnementale 6.3

C

caractéristique fonctionnelle du produit 6.2.1.2

catégorie de produit 6.2.1 catégorie d'impact 5.3.2.1 certification 1.7 charge critique B.2 cible environnementale 2.1.3 conclusion d'audit 3.6 constat d'audit 3.5 contrôle de cohérence 5.3.3.1 contrôle de complétude 5.3.3.3 contrôle de sensibilité 5.3.3.2 coproduit 4.2.2 critère de performance

environnementale 1.11.1.1 critères A.4 critères d'audit 3.3 critères environnementaux du

produit 6.3.1.3 cycle de vie 5.1

D

déchet 1.9 déclaration environnementale 6.1,

6.1.1 déclaration environnementale de

type III 6.4 déclaration environnementale

restreinte 6.1.2

déclaration explicative 6.1.4 demandeur de l'audit 3.8 développement durable A.6, B.6

E

ECI 1.11.1.2 emballage 4.2.3 émission fugitive 4.13.1 énergie d'alimentation 4.10.1 énergie de processus 4.10.2 entrant 4.12 entrant auxiliaire 4.12.1 environnement 1.1 EPE 1.11.1 équipe d'audit 3.9 étiquetage de type II 6.3 étiquette environnementale 6.1.1 évaluation de la performance

environnementale 1.11.1 évaluation de l'impact du cycle de

vie 5.3.2 expert technique 3.9.3

F

facteur de caractérisation 5.3.2.2 flux de référence 4.11 flux élémentaire 4.7, 4.8 flux énergétique 4.10 forêt A.1 frontière du système 4.5

I

identification des matériaux 6.6 impact environnemental 1.3 impact final par catégorie 5.3.2.4 indicateur de catégorie d'impact du

cycle de vie 5.3.2.1.1 indicateur de condition

environnementale 1.11.1.2 indicateur de performance de

management 1.11.1.3.1 indicateur de performance

environnementale 1.11.1.3 indicateur de performance

opérationnelle 1.11.1.3.2 indicateurs A.5 interprétation du cycle de vie 5.3.3 IPE 1.11.1.3 IPM 1.11.1.3.1 IPO 1.11.1.3.2

M

matière première 4.9 mécanisme

environnemental 5.3.2.3

meilleures techniques disponibles B.1

MTD B.1

O

objectif environnemental 2.1.2 objet 3.2 organisme 1.4 organisme de délivrance de

l'écolabel 6.2.2

P

partie intéressée 1.5 performance

environnementale 1.11, 2.1.5 politique environnementale 2.1.1 pollution B.5 preuve d'audit 3.4 prévention de la pollution 1.8 principe de précaution B.3 principe «pollueur-payeur» B.4 principes A.3 principes, critères et

indicateurs A.2 processus élémentaire 4.3 produit 4.2 produit final 4.2.4 produit intermédiaire 4.2.1 programme de déclarations

environnementales de type III 6.4.1

programme de label environnemental de type I 6.2

Q

qualité des données 5.3.1.2

R

réalisateur 5.2 responsable de l'audit

environnemental 3.9.2 résultat de l'inventaire du cycle de

vie 5.3.1.1

S

SME 2.1 sortant 4.13 système de management

environnemental 2.1 système de produits 4.1

Page 39: ΕΛΛΗΝΙΚΟ ΠΡΟΤΥΠΟ - · PDF fileISO 14050:2002(E/F) v Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards

 

ISO 14050:2002(E/F)

29

T

tierce partie 1.6 transparence 1.10

U

unité fonctionnelle 4.4

V

vérification de déclaration environnementale 6.1.3