XA CONNECTOR XA CONNECTOR - jst-mfg.com · XA Emboss Tape Radial Tape CONNECTOR XA CONNECTOR XA...
6
Radial Tape Emboss Tape XA CONNECTOR 2.5 mm pitch/Disconnectable Crimp style connectors D 2.5 min. 2.8 2 φ0.9 6.5 2.7 min. (8.1) (15.1) 2.7 9.2 2.5 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ＋0.1 0 φ0.9 (11.3) （6.9） 2.5 ±0.05 ＋0.1 0 φ0.9 φ1.2 ±0.05 ＋0.1 0 2.5 ±0.05 ±0.05 1.6 1.6 ＋0.1 0 ±0.1 1.3 ±0.1 1.2 ±0.03 2.5 ±0.1 6.2 ±0.1 6.2 ±0.03 0.5 ±0.03 0.5 ±0.05 2.3 ±0.05 A ±0.1 3.3 ±0.1 3.3 ±0.1 4.25 ±0.1 4.65 (1.4) (8) (1) (11.9) ● Secure locking device ● Solder crack preventive material ● Low insertion force ● Insertion guide mechanism ● Applicable to automatic board mounting machine ● Polarizing boss Specifications • Current rating: 3 A AC/DC (AWG #22, #20) • Voltage rating: 250 V AC/DC • Temperature range: -25℃ to +85℃ (including temperature rise in applying electrical current) • Contact resistance: Initial value/ 10 mΩ max. After environmental tests/ 20 mΩ max. • Insulation resistance: 1,000 MΩ min. • Withstanding voltage: 1,000 VAC/minute • Applicable wire: AWG #28 to #20 • Applicable PC board thickness: 1.6 mm * In using the products, refer to "Handling Precautions for Terminals and Connectors" described on our website (Technical documents of Product information page). * RoHS2 compliance * Dimensional unit: mm * Contact JST for details. Standards Recognized E 60389 Certified LR 20812 R9851220 Side entry type Top entry type Top entry type with a boss without a boss Dimension D: Refer to the Model No. chart of header side entry type. <Through-hole type> <SMT type> Note: 1 . The above figure is the figure viewed from the connector mounting side . 2. Tolerances are non-cumulative: ± 0.05 mm for all centers. 3. Hole dimensions differ according to the type of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details. 1 PC board layout and Assembly layout ®
Transcript of XA CONNECTOR XA CONNECTOR - jst-mfg.com · XA Emboss Tape Radial Tape CONNECTOR XA CONNECTOR XA...
Radial TapeEmboss Tape
XA CONNECTOR
XA CONNECTOR XA CONNECTOR
XA CONNECTOR2.5 mm pitch/Disconnectable Crimp style connectors
D 2.5 min.
2.8
2
φ0.9
6.5
2.7 m
in.
(8.1
)
(15.1)
2.79.2
2.5
±0.05
±0.05
±0.05
±0.
05
±0.
05
＋0.1 0
φ0.9
(11.3)
（6.9）2.5±0.05＋0.1
0 φ0.9 φ1.2
±0.05
＋0.1 0
2.5 ±0.05
±0.05
1.6
1.6
＋0.1 0
±0.11.3
±0.11.2
±0.032.5
±0.1
6.2
±0.1
6.2
±0.03
0.5
±0.03
0.5
±0.052.3
±0.05A
±0.1
3.3
±0.1
3.3 ±0.1
4.25
±0.1
4.65
(1.4) (8) (1)
(11.9)
● Secure locking device● Solder crack preventive material● Low insertion force● Insertion guide mechanism● Applicable to automatic board mounting
machine● Polarizing boss
Specifications• Current rating: 3 A AC/DC (AWG #22, #20)• Voltage rating: 250 V AC/DC• Temperature range: -25℃ to +85℃ (including temperature rise in applying electrical current) • Contact resistance: Initial value/ 10 mΩ max. After environmental tests/ 20 mΩ max.• Insulation resistance: 1,000 MΩ min.• Withstanding voltage: 1,000 VAC/minute• Applicable wire: AWG #28 to #20• Applicable PC board thickness: 1.6 mm
* In using the products, refer to "Handling Precautions for Terminals and Connectors" described on our website (Technical documents of Product information page).* RoHS2 compliance* Dimensional unit: mm* Contact JST for details.
Standards Recognized E 60389 Certified LR 20812 R9851220
Side entry typeTop entry type
Top entry type
with a bosswithout a boss
Dimension D: Refer to the Model No. chart of header side entry type.
<Through-hole type>
<SMT type>
Note: 1. The above figure is the figure viewed from the connector mounting side . 2. Tolerances are non-cumulative: ± 0.05 mm for all centers. 3. Hole dimensions differ according to the type of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details.
1
PC board layout and Assembly layout®
®® ®
®
Radial TapeEmboss Tape
XA CONNECTOR
XA CONNECTOR XA CONNECTOR
XA CONNECTOR2.5 mm pitch/Disconnectable Crimp style connectors
Radial TapeEmboss Tape
XA CONNECTOR
XA CONNECTOR XA CONNECTOR
XA CONNECTOR2.5 mm pitch/Disconnectable Crimp style connectors
No. ofcircuits
Model No. Dimensions (mm) Q’ty/bag
A B
Material and Finish
PA 66, UL94V-0, natural (white)
2 3 4 5 6 7 8 91011121314151820
XAP-02V-1XAP-03V-1XAP-04V-1XAP-05V-1XAP-06V-1XAP-07V-1XAP-08V-1XAP-09V-1XAP-10V-1XAP-11V-1XAP-12V-1XAP-13V-1XAP-14V-1XAP-15V-1-
XAP-20V-1
XARP-02VXARP-03VXARP-04VXARP-05VXARP-06VXARP-07VXARP-08VXARP-09VXARP-10VXARP-11VXARP-12VXARP-13VXARP-14VXARP-15VXARP-18V-
2.5 5.0 7.510.012.515.017.520.022.525.027.530.032.535.042.547.5
7.3 9.812.314.817.319.822.324.827.329.832.334.837.339.847.352.3
1,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,000
500500-500
1,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,000 500-
Standardtype
Standardtype
Retainermountable type
Retainermountable type
A
B
6.9
9.5
5.8
2.5 2.4
Circuit No.1
Circuit No.1 5.8
7.4 0.6
10.5
B
A
2.42.5
Retainer mountable type
Standard type
1.9
2.3
6.5
3.1 1.3 1.6Material and Finish
0.8～1.91.5～1.91.3～1.7
28～2224～2026～22
0.08～0.330.22～0.50.13～0.33
SXA-001T-P0.6SXA-01T-P0.6SXA-001T-P0.6L
Phosphor bronze, tin-plated (reflow treatment)
8,0008,0008,000
Model No.Applicable wire
mm2 AWG # Q’ty/reelInsulation O.D. (mm)
Contact
RoHS2 complianceNote : 1. SXA-001T-P0.6L is low-insertion force type contact, for easier insertion/withdrawal, which would be less resistant to the vibration. The crimp height is different from the standard contact.Note : 2. Contact JST for gold-plated products.
Housing
RoHS2 compliance<For reference> As the color identification,
the following alphabet shall be put in the underlined part.For availability, delivery and minimum order quantity, contact JST.<Standard type>ex. XAP-02V-1-oo-
(blank)...natural (white)K...black R...red E...blue Y...yellow L...lemon yellow M...green O...orange N...brown H...gray P...purple LE...light blue PK...pink FY...vivid yellow Z...ivory
<Retainer mountable type>ex. XARP-02V-oo
(blank)...natural (white)K...black R...red E...blue L...lemon yellow
2
Contact Crimpingmachine Crimp applicator with diesDiesCrimp applicator
Applicator
SXA-001T-P0.6SXA-01T-P0.6SXA-001T-P0.6L
AP-K2N MKS-L
MK/SXA/M-001-06
MK/SXA/M-01-06
MK/SXA/M-001-06L
APLMK SXA/M001-06
APLMK SXA/M01-06
APLMK SXA/M001-06L
Note: Contact JST for fully automatic crimping applicator.
No. ofcircuits
Model No. Dimensions (mm)
A B
Material and Finish
Without a boss With a bossQ’ty/box
Pin: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Wafer: Glass-filled PA 66, UL94V-0, natural (ivory)
23456789
10111213141520
B02B-XASK-1B03B-XASK-1B04B-XASK-1B05B-XASK-1B06B-XASK-1B07B-XASK-1B08B-XASK-1B09B-XASK-1B10B-XASK-1B11B-XASK-1B12B-XASK-1B13B-XASK-1B14B-XASK-1B15B-XASK-1B20B-XASK-1
B02B-XASK-1-AB03B-XASK-1-AB04B-XASK-1-AB05B-XASK-1-AB06B-XASK-1-AB07B-XASK-1-AB08B-XASK-1-AB09B-XASK-1-AB10B-XASK-1-AB11B-XASK-1-AB12B-XASK-1-AB13B-XASK-1-AB14B-XASK-1-AB15B-XASK-1-AB20B-XASK-1-A
2.5 5.0 7.510.012.515.017.520.022.525.027.530.032.535.047.5
7.510.012.515.017.520.022.525.027.530.032.535.037.540.052.5
1,000400400400400250250250250200200100100100100
Top entry type
A
0.6φ2.5
B
8.8
3.4
1.5
φ1
1.6
6.5
3.2
6.4
1.6
Circuit No.1
H JST
B 12.6
A 9.2
3.5
1.8φ0.62.5
7.6
2.7
3.2
Circuit No.1
CircuitNo.1 Mark
B
A
6.4
3.2
6.5
φ0.62.5
8.8
3.4
Circuit No.1
Radial TapeEmboss Tape
XA CONNECTOR
XA CONNECTOR XA CONNECTOR
XA CONNECTOR2.5 mm pitch/Disconnectable Crimp style connectors
No. ofcircuits
Model No.A B D
Material and Finish
Side entry type with a hook S02B-XASS-1S03B-XASK-1S04B-XASK-1S05B-XASK-1S06B-XASK-1S07B-XASK-1S08B-XASK-1S09B-XASK-1S10B-XASK-1S11B-XASK-1S12B-XASK-1S13B-XASK-1S14B-XASK-1
Q’ty/box
Pin: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Wafer: Glass-filled PA 66, UL94V-0, natural (ivory)
2 3 4 5 6 7 8 91011121314
2.5 5.0 7.510.012.515.017.520.022.525.027.530.032.5
7.510.012.515.017.520.022.525.027.530.032.535.037.5
Dimensions (mm)
1.252.503.755.006.257.508.75
10.0011.2512.5013.7515.0016.25
250250200200200200100100100100100100100
A
2.5
2.5 7.8 0.95
No. ofcircuits Model No. Q’ty/bag
23456789
101112131415
XMS-02VXMS-03VXMS-04VXMS-05VXMS-06VXMS-07VXMS-08VXMS-09VXMS-10VXMS-11VXMS-12VXMS-13VXMS-14VXMS-15V
A
2.55.07.5
10.012.515.017.520.022.525.027.530.032.535.0
1,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,000
Material and FinishGlass-filled PA 66, UL94V-0, natural (ivory)
No. ofcircuits Model No. Q’ty/bag
23456789
101112131415
XMS-02VXMS-03VXMS-04VXMS-05VXMS-06VXMS-07VXMS-08VXMS-09VXMS-10VXMS-11VXMS-12VXMS-13VXMS-14VXMS-15V
A
2.55.07.5
10.012.515.017.520.022.525.027.530.032.535.0
1,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,0001,000
Material and FinishGlass-filled PA 66, UL94V-0, natural (ivory)
Retainer
RoHS2 compliance
Through-hole type shrouded header
Top entry type without a boss
Top entry type with a boss
Side entry type with a hook
RoHS2 compliance This product displays (LF)(SN) on a label.Note: Contact JST for gold-plated products.
RoHS2 compliance This product displays (LF)(SN) on a label.Note: 1. Dimension D...See PC board layout.
2. Contact JST for gold-plated products.<For reference> As the color identification,
the following alphabet shall be put in the underlined part.For availability, delivery and minimum order quantity, contact JST.ex. S02B-XASK-1-
S...natural (ivory)K...black R...red E...blue M...green Y...yellow
3
Radial TapeEmboss Tape
XA CONNECTOR
XA CONNECTOR XA CONNECTOR
XA CONNECTOR2.5 mm pitch/Disconnectable Crimp style connectors
Radial TapeEmboss Tape
XA CONNECTOR
XA CONNECTOR XA CONNECTOR
XA CONNECTOR2.5 mm pitch/Disconnectable Crimp style connectors
No. ofcircuits
Model No.Top entry type
Dimensions (mm)
A B
Material and Finish
Without a boss With a bossQ’ty/box
Pin: Copper alloy, copper-undercoated, tin-plated (reflow treatment)Wafer: Glass-filled PA 66, UL94V-0, natural (white)
2 3 4 5 6 7 8 910111213141518
B02B-XASK-1NB03B-XASK-1NB04B-XASK-1NB05B-XASK-1NB06B-XASK-1NB07B-XASK-1NB08B-XASK-1NB09B-XASK-1NB10B-XASK-1NB11B-XASK-1NB12B-XASK-1NB13B-XASK-1NB14B-XASK-1NB15B-XASK-1NB18B-XASK-1N
B02B-XASK-1N-AB03B-XASK-1N-AB04B-XASK-1N-AB05B-XASK-1N-AB06B-XASK-1N-AB07B-XASK-1N-AB08B-XASK-1N-AB09B-XASK-1N-AB10B-XASK-1N-AB11B-XASK-1N-AB12B-XASK-1N-AB13B-XASK-1N-AB14B-XASK-1N-AB15B-XASK-1N-A-
2.5 5.0 7.510.012.515.017.520.022.525.027.530.032.535.042.5
7.510.012.515.017.520.022.525.027.530.032.535.037.540.047.5
1,000400400400400250250250250200200100100100100
A
0.6φ2.5
B
8.8
3.4
1.5
φ1
1.6
6.5
3.2
6.4
1.6
Circuit No.1
H JST
B 12.6
A9.2φ0.62.5
7.6
3.2
Circuit No.1
CircuitNo.1 Mark
B
A
6.4
3.2
6.5
φ0.62.5
8.8
3.4
Circuit No.1
No. ofcircuits
Model No. Dimensions (mm)A B
Material and Finish
Q’ty/box
Pin: Copper alloy, copper-undercoated, tin-plated (reflow treatment)Wafer: Glass-filled PA 66, UL94V-0, natural (white)
2 3 4 5 6 7 8 91011121314
S02B-XASS-1N-BNS03B-XASS-1N-BNS04B-XASS-1N-BNS05B-XASS-1N-BNS06B-XASS-1N-BNS07B-XASS-1N-BNS08B-XASS-1N-BNS09B-XASS-1N-BNS10B-XASS-1N-BNS11B-XASS-1N-BNS12B-XASS-1N-BNS13B-XASS-1N-BNS14B-XASS-1N-BN
02.505.007.510.012.515.017.520.022.525.027.530.032.5
7.510.012.515.017.520.022.525.027.530.032.535.037.5
250250200200200200100100100100100100100
Side entry type without a hook
N type
Through-hole type shrouded header
Top entry type without a boss
Side entry type without a hook
Top entry type with a boss RoHS2 compliance This product displays (LF)(SN) on a label.
<For reference> As the color identification, the following alphabet shall be put in the underlined part.For availability, delivery and minimum order quantity, contact JST.
ex. B02B-XASK-1N-A-S...natural (white)K...black R...red E...blue Y...yellow L...lemon yellow M...green O...orange N...brown H...gray P...purple LE...light blue PK...pink FY...vivid yellow
RoHS2 compliance This product displays (LF)(SN) on a label.Note: 1. As for side entry type, we recommend to use a product with a boss (hook) because stress is applied directly to fillet part when handling the wire. When using the side entry type product without a boss (hook), please handle the wire with care.
4
Radial TapeEmboss Tape
XA CONNECTOR
XA CONNECTOR XA CONNECTOR
XA CONNECTOR2.5 mm pitch/Disconnectable Crimp style connectors
8.8
2.8
2.5
BA
φ0.6
6.4
6.5
3.2
CircuitNo.1
No. ofcircuits
Model No. Dimensions (mm) Q’ty/boxA B
Material and FinishPin: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Wafer: Glass-filled PA 66, UL94V-0, natural (ivory)
2345678
Top entry type without a boss Top entry type with a bossB02B-XASS-1-TB03B-XASS-1-TB04B-XASS-1-TB05B-XASS-1-TB06B-XASS-1-TB07B-XASS-1-TB08B-XASS-1-T
2.55.07.5
10.012.515.017.5
7.510.012.515.017.520.022.5
1,0001,000
500500500500500
-B03B-XASS-1-A-TB04B-XASS-1-A-T B05B-XASS-1-A-TB06B-XASS-1-A-TB07B-XASS-1-A-TB08B-XASS-1-A-T
8.8
2.8
1.5
1.6
2.5
BA
φ0.6
6.4
6.5
3.21.6
CircuitNo.1
No. ofcircuits
Model No. Dimensions (mm)A B
Material and Finish
Q’ty/reel
Pin: Copper alloy, copper-undercoated, tin-plated (reflow treatment)Wafer: PA, UL94V-0, naturalSolder tab: Brass, copper-undercoated, tin-plated (reflow treatment)
2 3 4 5 6 7 8 9121315
BM02B-XASS-TFBM03B-XASS-TFBM04B-XASS-TFBM05B-XASS-TFBM06B-XASS-TFBM07B-XASS-TFBM08B-XASS-TFBM09B-XASS-TFBM12B-XASS-TFBM13B-XASS-TFBM15B-XASS-TF
2.55.07.5
10.012.515.017.520.027.530.035.0
10.012.515.017.520.022.525.027.535.037.542.5
500500500500500500500500500500500
Top entry type
Circuit No.1AB 8
9.4
7.1
1.4 1
Circuit No.1
BA
89.
4
7.1
1.4 1
6.4
20
2.5
BA
8.8
2.8
φ0.6
6.4
6.5
3.2
12.7
186
φ4
<2 circuits>
<3 to 9, 12, 13, 15 circuits>
SMT type shrouded header
RoHS2 compliance This product displays (LF)(SN) on a label.<For reference> As the color identification,
the following alphabet shall be put in the underlined part.For availability, delivery and minimum order quantity, contact JST.ex. BM02B-XASS-TF-
S...natural K...black R...red E...blue
Through-hole type shrouded header on radial-tape
Top entry type without a boss
Top entry type with a boss
RoHS2 compliance This product displays (LF)(SN) on a label.<For reference> As the color identification,
the following alphabet shall be put in the underlined part.For availability, delivery and minimum order quantity, contact JST.
ex. B03B-XASS-1-A-T-S...natural (ivory)R...red E...blue M...green
Taping specifications
Note: Conforms to JIC C 0806 of "Tape packaging of components with unidirectional leads on continuous tapes".
5
6
Radial TapeEmboss Tape
XA CONNECTOR
XA CONNECTOR XA CONNECTOR
XA CONNECTOR2.5 mm pitch/Disconnectable Crimp style connectors
Packaging specifications
TERMINALS & CONNECTORS
R
D
Ｈ
W
Leader tapeTail tape
Flat pack (zigzag folded)24 indexing holes per fold (304.8 mm)
316(Ｗ) × 45(Ｄ) × 330(Ｈ) mm
1,000 pcs./box 500 pcs./box
19.05 mm
2, 3 circuits4 to 8 circuits
Package typeDistance between foldsBox sizeDistance between the end of the tape and the first connector’s center line (either end)
Quantity
Distance between the end of the tape and the first connector's center line (either end)
Note: Products of different packaging specifications are also available. Contact JST for details.
