VHF & UHF COMBO TV ANTENNA€¦ · Antenna Length 4 Reflector x2 Clamp, Screw & Wingnut x2 Bracket...

2
VHF & UHF COMBO TV ANTENNA AV-0966V Antenna Specification How to install? What’s in the box? No. of Elements Frequency Range Antenna Gain Beam Width H/V Front-Back Ratio Impedance Antenna Length 4 Reflector x2 Clamp, Screw & Wingnut x2 Bracket x1 Weather-proof F connector cover x 1 User manual x 1 174-230MHz 470-862MHz 10-14dB H60° 15-20dB 75Ω 800mm A. Unfold the VHF elements on the upper reflector (at the top side) until they’re locked tight in the plastic support. B. Joint the two reflectors with the metal clamps, screws & wingnuts. C. Unfold the element carrier and then tighten the wingnut in the middle. D. Attach the element carrier to the reflector by using the plastic jointing parts. E. Use the coaxial cable to connect the F connector from the UHF dipole to the F connector marked “VHF IN” in the middle of element carrier. Tigten the connectors and use the plastic covers to protect the connectors. F. Mount the antenna to a pole as high as possible. Connect the coaxial cable from TV to the F connector marked “TO TV” in the middle of element carrier. Turn the antenna towards the TV tower for best reception.. Clamps VHF Dipole , Screws & Wingnut Upper Reflector Element Carrier Plastic Jointing Part D D F E F E B A C VHF In www.primecables.com

Transcript of VHF & UHF COMBO TV ANTENNA€¦ · Antenna Length 4 Reflector x2 Clamp, Screw & Wingnut x2 Bracket...

Page 1: VHF & UHF COMBO TV ANTENNA€¦ · Antenna Length 4 Reflector x2 Clamp, Screw & Wingnut x2 Bracket x1 Weather-proof F connector cover x 1 User manual x 1 174-230MHz 470-862MHz 10-14dB

VHF & UHF COMBO TV ANTENNA

AV-0966V

Antenna Specification

How to install?

What’s in the box?

No. of Elements

FrequencyRange

AntennaGain

Beam WidthH/V

Front-BackRatio Impedance Antenna

Length

4

Reflector x2 Clamp, Screw & Wingnut x2 Bracket x1Weather-proof F connector cover x 1 User manual x 1

174-230MHz470-862MHz

10-14dB H60° 15-20dB 75Ω 800mm

A. Unfold the VHF elements on the upper reflector (at the top side) until they’re locked tight in the plastic support.B. Joint the two reflectors with the metal clamps, screws & wingnuts.C. Unfold the element carrier and then tighten the wingnut in the middle.D. Attach the element carrier to the reflector by using the plastic jointing parts. E. Use the coaxial cable to connect the F connector from the UHF dipole to the F connector marked “VHF IN” in the middle of element carrier. Tigten the connectors and use the plastic covers to protect the connectors.F. Mount the antenna to a pole as high as possible. Connect the coaxial cable from TV to the F connector marked “TO TV” in the middle of element carrier. Turn the antenna towards the TV tower for best reception..

Clamps

VHF Dipole

, Screws & Wingnut

Upper Reflector

Element Carrier

Plastic Jointing Part D

D

F

E

F

E

B

A

CVHF In

www.primecables.com

Page 2: VHF & UHF COMBO TV ANTENNA€¦ · Antenna Length 4 Reflector x2 Clamp, Screw & Wingnut x2 Bracket x1 Weather-proof F connector cover x 1 User manual x 1 174-230MHz 470-862MHz 10-14dB

Combinaison d’antenne VHF & UHF

AV-0966V

Spécifications de l’antenne

Comment Installer?

Qu’y a-t-il dans la boîte?

No. d’Éléments

Portée de laFréquence

Gain de l’antenne

Largeur du faisceau H/V

RatioAvant-arrière Impédance Longueur

de l’antenne

4

Reflecteurs x2 Attache, Vis&écrou papillon x2 Support x1 Couverture de connecteur F Imperméable x 1 Guide d’utilisateur x 1

174-230MHz470-862MHz

10-14dB H60° 15-20dB 75Ω 800mm

Dipôle VHF

Attache, Vis & écrou papillon

Réflecteur Supérieur

Porteur d’Élément

Partie de Jonction en plastique

D

D

F

E

F

E

B

A

CVHF In

www.primecables.com

A. Dépliez les éléments VHF sur le réflecteur supérieur (à la partie supérieure) jusqu’à ce qu’ils soient verrouillés au support plastique.

B. Joignez les deux réflecteurs avec les attaches en métal, vis et écrous papillon. C. Dépliez le porteur d’élément et serrez l’écrou papillon au milieu. D. Attachez le porteur d’élément au réflecteur en utilisant les parties de jonction en plastique.E. Utilisez le câble coaxial afin de connecter le connecteur F du dipôle UHF au connecteur F marqué “VHF IN” au milieu

du porteur d’élément. Serrez les connecteurs et utilisez les couvertures en plastique afin de les protéger. F. Montez l’antenne le plus haut que possible sur un Poteau. Connectez le câble coaxial du téléviseur au connecteur F

marqué “TO TV” au milieu du porteur d’élément. Tournez l’antenne vers la tour du TV pour une meilleure réception.