9-26V

U

5.8GV Input

USER

G 48CH 25/200/6

R MAN

VTX 600mw Sw

NUAL

witchable

L

GENERAL SPECIFICATIONS:

Operating Voltage DC 9-26V Supply Current 270MA Operating Temperature -20~80 Audio Carier Frequency 6.5MHz Video Input Impedance 75Ω Weight 10 grams Antenna Connector SMA / RPSMA Video Format PAL / NTSC Output Power 13~28dbm Channels 48CH Frequency Range 5362~5945MHz Port Connector 2.0 socket, 5 pin Size 35cmx35mm

BASIC FUNCTIONS 1. Power on Indication

The VTX indicates the power after powering on. Three seconds later, it starts to flash and indicates the band & channel.

2. Adjust channel, band and power via two buttons “FR” and “CH” . A. Band Select Mode:

Long press FR for 3 seconds one time at the initial state, it enters to band mode after blue LED is on. Under the band mode, short press FR for 1 second one time, the band will toggle from A to B, and the blue LED will flash from one time to two times. Press FR again for 1s, the band toggles from B to E, and the blue LED will flash from two times to three times. After such a sequence, the band will toggle among A, B, E, F, R, L, and the blue LED flashes 1, 2, 3, 4, 5 and 6 accordingly.

B. Channel Select Mode: Long press CH for 3 seconds at the initial state, it enters to Channel Mode after the red LED is on. Under the channel mode, short press CH for 1 second one time, the channel will toggle from 1 to 2, and the red LED flashes from one time to two times. Short press CH again for one second one time, the channel will be toggled from 2 to 3, and the red LED flashes from two times to three times. After such a sequence, the channel will toggle among 1, 2, 3, 4, 5, 6, 7, 8, and the red LED flashes 1, 2, 3, 4, 5 and 6 accordingly.

C. Power Select Mode: Long press FR and CH for 3 seconds one time at the initial state, it enters to Power Select Mode after both the Red LED and Blue LED are on. Under the Power Select Mode, press any button of FR and CH for one second, the power will be toggled from 25mw to 200mw, the LEDs will flash two times simultaneously from the beginning one time. Press any button of FR and CH again for one second, the power will be toggled from 200mw to 600mw, and the two LEDs will be changed to flash three times simultaneously from 2 times. Do in the same way, the power will be switched among 25mw, 200mw and 600mw, and the two LEDs will flash one time, two time and three times accordingly.

3. LED Flash Codes for Band, Channel and Power

A. Red LED is long on: Channel Mode Blue LED is long on: Band Mode Two LEDs are long on: Power Mode

B. Red LED flashes: Indicates Channel Blue LED flashes: Indicates Band. Two LEDs flash one time Simultaneously: 25mw Two LEDs flash two times simultaneously: 200mw Two LEDs flash three times simultaneously: 600mw

4. Mode Exit A. Press any of the buttons for 3 seconds, the red and blue LEDs will flash alternately, it means it has already exited

current mode and return to normal indications for channel and bands only. B. If there’s no any operation after entering any of the modes for 30 seconds, it will exit the current mode automatically.

OUTER DIAGRAM:

FREQUENCY TABLE

FR CH

FR A FR B FR E FR F FR R FR L

CH1 5865MHz 5733MHz 5705MHz 5740MHz 5658MHz 5362MHz

CH2 5845MHz 5771MHz 5665MHz 5780MHz 5695MHz 5399MHz

CH3 5825MHz 5771MHz 5665MHz 5780MHz 5732MHz 5436MHz

CH4 5805MHz 5790MHz 5645MHz 5800MHz 5769MHz 5473MHz

CH5 5785MHz 5809MHz 5885MHz 5820MHz 5806MHz 5510MHz

CH6 5765MHz 5828MHz 5905MHz 5840MHz 5843MHz 5547MHz

CH7 5745MHz 5847MHz 5925MHz 5860MHz 5880MHz 5584MHz

CH8 5725MHz 5866MHz 5945MHz 5880MHz 5917MHz 5621MHz