Tight Head Steel Drum Crystalline, porus Grayish white to gray Zn 3(PO 4) 2 ・ 4H 2 O Zn 2Fe(PO 4)...

of 1 /1
Used for chemical products of general quality, petroleum, gasoline and other liquid oils such as lubricating oil. Triple seaming is a sturdy seaming method suited for drums containing dangerous goods. Internal cleanliness has been enhanced by the application of a full automatic production process and phosphate coating treatment system. Tight Head Steel Drum Phosphate Coating TreatmentPhosphate coating treatment is applied to both internal and external surfaces of universal steel drums. Two types of phosphate coating treatment, zinc-phosphate coating and iron- phosphate, are available. Their physical properties are shown in the table below. Selection between these two should be made according to the intended use of the drums. Class Gauge [mm] Internal diameter [mm] D1 Diameter over bottom chime [mm] D3 Total drum height [mm] H1 Depth of top h2 Clearance from floor [mm] h3 Capacity [L] Mass [kg] (min.) Class H Class M Class LM Class L 1.6 1.2 1.0/1.2 1.0 27.5 20.5 18.0 17.0 566 ±2 4 (min.) 212 (min.) 300 ±3 (a) 890 ±5 585 (max.) 585 (max.) Major Application Technology JIS Z 1601 h4 H1 D1 D2 D3 h3 Inner Thread Type Closure External Thread Type Closure Gasket Plug Flange Top end Plug Gasket Composition of coating layer Zinc-phosphating Crystalline, porus Grayish white to gray Zn3(PO4)2 4H2O Zn2Fe(PO4)2 4H2O Characteristics of Phosphate CoatingIron-phosphating Non-crystalline FePO4 2H2O γ-Fe2O3 Color tone Structure of coating layer Interface color of yellowish gold to purple blue [mm] D2 External diameter over rolling hoops Notes (a) The depth of the top small be such that the closures and capseals/overseals do not protrude above the chime. [mm] h4 Distance between beads NIPPON STEEL & SUMIKIN DRUM CO.,LTD.

Transcript of Tight Head Steel Drum Crystalline, porus Grayish white to gray Zn 3(PO 4) 2 ・ 4H 2 O Zn 2Fe(PO 4)...

Used for chemical products of general quality, petroleum, gasoline and other liquid oils such as lubricating oil.

①Triple seaming is a sturdy seaming method suited for drums containing dangerous goods.

②Internal cleanliness has been enhanced by the application of a full automatic production process and phosphate coating treatment system.

Tight HeadSteel Drum

【Phosphate Coating Treatment】Phosphate coating treatment is applied to both internal and external surfaces of universal steel drums. Two types of phosphate coating treatment, zinc-phosphate coating and iron- phosphate, are available. Their physical properties are shown in the table below. Selection between these two should be made according to the intended use of the drums.

ClassGauge

[mm]

Internaldiameter

[mm]

D1

Diameter overbottom chime

[mm]

D3

Total drumheight[mm]

H1

Depthof top

h2

Clearancefrom floor

[mm]

h3

Capacity

[L]

Mass[kg]

(min.)

Class H

Class M

Class LM

Class L

1.6

1.2

1.0/1.2

1.0

27.5

20.5

18.0

17.0

566

±2

4

(min.)

212

(min.)

300

±3(a)

890

±5

585

(max.)

585

(max.)

M a j o r A p p l i c a t i o n

Te c h n o l o g y

■JIS Z 1601

h4H1 D1

D2

D3

h3

Inner Thread Type Closure External Thread Type Closure

Gasket

Plug

Flange

Top end

Plug

Gasket

Composition ofcoating layer

Zinc-phosphating

Crystalline, porus

Grayish white to gray

Zn3(PO4)2・4H2OZn2Fe(PO4)2・4H2O

【Characteristics of Phosphate Coating】

Iron-phosphating

Non-crystalline

FePO4・2H2Oγ-Fe2O3

Color tone

Structure ofcoating layer

Interface color ofyellowish gold to

purple blue

[mm]

D2

Externaldiameter overrolling hoops

Notes (a) The depth of the top small be such that the closures and capseals/overseals do not protrude above the chime.

[mm]

h4

Distancebetweenbeads

NIPPON STEEL & SUMIKIN DRUM CO.,LTD.