Single folding: 172 x 246 mm -...
Transcript of Single folding: 172 x 246 mm -...
ALPINE_SWR-8Dx Manual_-JYC-1212158D-JYC-1212158D-1 2013-01-09
Single folding: 172 x 246 mm
3
3
3
SWR-8D48 Inch Dual Voice Coil Subwoofer (4Ω)+(4Ω)
Haut-parleur d'extrêmes graves à double bobine 8 po (4Ω)+(4Ω)
SWR-8D28 Inch Dual Voice Coil Subwoofer (2Ω)+(2Ω)
Haut-parleur d'extrêmes graves à double bobine 8 po (2Ω)+(2Ω)
TYPE-R SUBWOOFERHAUT-PARLEUR D'EXTRÊMES GRAVES TYPE-R
APPLICATION GUIDEGUIDE D' APPLICATION
ALPINE ELECTRONICS DE ESPAÑA, S.A.Portal de Gamarra 36, Pabellón 3201013 Vitoria (Alava). APDO. 133, SpainTel: (945) 283-588
ALPINE ELECTRONICS GmbHWilhelm-Wagenfele-Stra e 1-380807 Munchen, GermanyTel: (089) 324-2640
ALPINE ELECTRONICS MARKETING,INC.1-7 Yukigaya-otsukamachi,Ota-ku, Tokyo 145-0067, JapanTel: (03) 5499-4531
ALPINE ELECTRONICS OF AMERICA, INC.19145 Gramercy Place, Torrance,California 90501, U.S.A.Tel: 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF CANADA, INC.777 Supertest Road, Toronto,Ontario M3J 2M9, CanadaTel: (416) 736-6211
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.161-165 Princes Highway, HallamVictoria 3803, AustraliaTel: (03) 8787-1200
ALPINE ELECTRONICS (Benelux) GmbHLeuvensesteenweg 510-B61930 Zaventem, BelgiumTel: 02-7251315
ALPINE ELECTRONICS OF U.K., LTD.Alpine House Earlplace Business Park,Fletchamstead Highway, Coventry CV4, 9TWUnited KingdomTel: (2476) 719-500
ALPINE ITALIA S.p.A.Viale C. Colombo 8,20090 Trezzano Sul Naviglio (Ml), ItalyTel: (02) 484-781
Printed in CHINA
ALPINE ELECTRONICS FRANCE S.A.R.L.98,Rue de la Belle Etoile, Z.I. Paris Nord,B.P. 50016, 95945, Roissy Charles de GaulleCedex, FranceTel: (01) 4863-8989
SWR-8D2SWR-8D4
O194 mm [7-5/8"]
O174.8 mm [6-7/8"]
O 2
15 m
m [8
-1/2
"]
21 mm[13/16"]
114.4 mm[4-1/2"]
O 1
75.3
mm
[6-1
5/16
"]
O 1
33 m
m
[5-1
/4"]
Free Air Resonance
Equivalent Stiffness
Mechanical Q
Electrical Q
Total Q
Cone Area
Linear Excursion
Mechanical Travel
SPL
Re
Le
Fs
Vas
Qms
Qes
Qts
Sd
Frequency Response
Power Range
Type-R
Ggneral Specifications
Thiel-Small Parameters
TailleSealed
Power Handling
Magnet Weight
Voice Coil Diameter
Sensibilité(1W/1m)
Résistance CC
Inductance
Résonance à l'airlibre
Raiduer équivalente
Q Méchanique
Q Électrique
Q Total
Surface dudiaphragme
Response en Fréquence
Plage de Puissance
Puisance Admissible
Poids de l'aimant
Diamètre de la bobine
350 W RMS (efficace) / 1000 W PEAK (de crête)
150 W-350 W RMS (efficace)
40 mm (1.6")
SWR-8D4SWR-8D2
52 oz
42 Hz40 Hz
10.5 L ( 0.37 ft3
3.7 Ω+3.7 Ω
6.8
0.62
0.57
83.5 dB
1.85 Ω+1.85 Ω
7.2
0.54
0.50
201 cm2
52 mm
12 mm
4 Ω+4 Ω2 Ω+2 Ω
30 Hz-200 Hz
8"
Sensitivity (1W/1m)
DC Resistance
Inductance
Xmax(1-way)
Xmech (P-P)
Déplacement Mécanique
Displacement Linéare
Note: Specifications subject to change without notice
) 10.3 L ( 0.36 ft3 )
2
High Amplitude Multi-RollSantoprene® Surround(Patent Pending)
Progressive Conex®
Spider with Reinforced Layer Tinsel Leads (US Pat #6,810,988)
ConcealedMount Gasket (Integrated Grille System Ready, US Pat #7,760,900)
Airflow Management & Heat Transfer System (US Pat #7,684,585; #6,678,387)
Compound Radius Curve Extended Pole Geometry (US Pat #6,639,993)
Cast Aluminum Frame with Integral Shorting Sleeve & Radial Vented Heat Sink (US Pat #7,634,101; #7,272,238; other patents pending) 38mm Voice Coil with High-Temp
4-Layer DVC Winding on Spiral Cut
High-Excursion OverhungVoice Coil Configuration
High-Grade Strontium Ferrite Segmented Magnet Assembly
Reinforced Parabolic Cone Structure withPoly-Mica Dust Cap & Pulp-Kevlar Cone Body
Reinforced Cone Neck& Spider Joint
Integrated 8AWG Push Terminals with VC Configuration Jumpers
SWR-1xDx
Example 1 One Amplifier + One SubwooferExemple 1 1 amplificateur et 1 h.-p. d'extrêmes graves
Example 3 Two Amplifiers + One SubwooferExemple 3 1 amplificateur et 1 h.-p. d'extrêmes graves
Example 5 One Amplifier + Two SubwoofersExemple 5 1 amplificateur et 1 h.-p. d'extrêmes graves
Example 7 One Amplifier + Three SubwoofersExemple 7 1 amplificateur et 1 h.-p. d'extrêmes graves
SWR-8D2 / SWR-8D4
TYPE-R WIRING WORKSHEETCÂBLAGE POUR TYPE-R
Example 2 One Amplifier + One SubwooferExemple 2 1 amplificateur et 1 h.-p. d'extrêmes graves
Example 4 Two Amplifiers + One SubwooferExemple 4 1 amplificateur et 1 h.-p. d'extrêmes graves
Example 6 One Amplifier and Two SubwoofersExemple 6 1 amplificateur et 1 h.-p. d'extrêmes graves
Example 8 One Amplifier + Four SubwoofersExemple 8 1 amplificateur et 1 h.-p. d'extrêmes graves
4Ω + 4Ω 2Ω + 2Ω
APPLICATION DIAGRAMS
Caution ! Consult amplifier owner's manual for connection.Attention : lire le manuel de l'amplificateur pour la connexion à .
JUMPER CAVALIER
JUMPER CAVALIER
JUMPER CAVALIER
JUMPER CAVALIER
SWR-1xDx
SWR-1xDx SWR-1xDx
SWR-1xDx SWR-1xDx
SWR-1xDx
SWR-1xDx SWR-1xDx SWR-1xDxSWR-1xDx SWR-1xDx SWR-1xDx SWR-1xDx
2Ω
4Ω
4Ω
4Ω
8Ω1Ω 4Ω
SWR-1xDx
2Ω
2Ω
SWR-1xDx SWR-1xDx
2Ω
2.6Ω 2Ω
Front Mount Displacement* (magnet in)
Reverse Mount Added Volume* (magnet out)-0.050 ft3
+0.035 ft3
*Based upon 3/4" (19mm) baffle thickness, with opening cut approximately to gasket inner diameter
Avant le déplacement du Mont * (aimant)
Inverser Volume mont Ajouté * (des aimants)* Sur la base de l'épaisseur du déflecteur 3/4" (19mm), avec une ouverture coupée à peu près à joint diamètre intérieur
-0.050 pi
+0.035 pi
Notes: 1) Recommended enclosure net lnternal volume is based upon 3/4” (19mm) MDF enclosure construction.2) Consult the table below for altemative enclosure net internal volume calculation.
0.15-0.50 ft
13" x 13" x 5.5"
0.30 ft
0.25 ftD2: 59 Hz, 0.72D4: 59 Hz, 0.72
D2: 59 Hz, 0.72D4: 59 Hz, 0.72
11" x 8.5" x 20"
D2: 32 Hz, 2 dB, 37 HzD4: 32 Hz, 2 dB, 37 Hz
D2: 32 Hz, 2 dB, 37 HzD4: 32 Hz, 2 dB, 37 Hz
0.25-0.7 ft
0.70 ft
5.25 in (7" x 0.75")
0.10 ft
0.55 ft
15.5"
36-40 Hz
SWR-8D2/D4
External Box Dimensions
Gross Internal Volume
Net Internal Volume
External Box Dimensions
Gross Internal Volume
Net Internal Volume (Vb)
Aire de l’évent (dimensions)
Vent Length
Vent Displacement
F3, ripple, Fb
Net Internal Volume
Net Internal Volume
Tuning
0.15-0.50 pi
13 po x 13 po x 5.5 po
0.30 pi
0.25 pi
11 po x 8.5 po x 20 po
0.25-0.7 pi
0.70 pi
5.25 in (7 po x 0.75 po)
0.10 pi
0.55 pi
15.5 po
36-40 Hz
SWR-8D2/D4
Volume intérieur Net ***
recommendedBoîte Scellé
recommendedcharge bass-reflex
Gamme Box Sealed
Gamme charge bass-reflex
Dimensions de la boîte extérieures
Volume intérieur brut
F3, Qtc
Dimensions extérieures
Volume intérieur brut
Volume intérieur Net (Vb)***
Aire de l’évent (dimensions)
Longueur de l’évent
déplacement de l’évent
F3, crête, Fb
Net volume interne
Volume net interne
mise au point
Notes:1) Recommandé enceinte volume net inteme est basée sur 3/4 "(19mm) de construction boîtier en MDF.2) Consulter le tableau ci-dessous pour le calcul de filet d'enclos altemative volume interne.
Sealed Box Range
Recommended Vented Box
Vented Box Range
Recommended Sealed Box
F3, Qtc
3
3
3
3
3
3
3
3
3
3
3
3
3
2
ALPINE_SWR-8Dx Manual_-JYC-1212158D-JYC-1212158D-1 2013-01-09
Single folding: 172 x 246 mm
3
3
3
SWR-8D48 Inch Dual Voice Coil Subwoofer (4Ω)+(4Ω)
Haut-parleur d'extrêmes graves à double bobine 8 po (4Ω)+(4Ω)
SWR-8D28 Inch Dual Voice Coil Subwoofer (2Ω)+(2Ω)
Haut-parleur d'extrêmes graves à double bobine 8 po (2Ω)+(2Ω)
TYPE-R SUBWOOFERHAUT-PARLEUR D'EXTRÊMES GRAVES TYPE-R
APPLICATION GUIDEGUIDE D' APPLICATION
ALPINE ELECTRONICS DE ESPAÑA, S.A.Portal de Gamarra 36, Pabellón 3201013 Vitoria (Alava). APDO. 133, SpainTel: (945) 283-588
ALPINE ELECTRONICS GmbHWilhelm-Wagenfele-Stra e 1-380807 Munchen, GermanyTel: (089) 324-2640
ALPINE ELECTRONICS MARKETING,INC.1-7 Yukigaya-otsukamachi,Ota-ku, Tokyo 145-0067, JapanTel: (03) 5499-4531
ALPINE ELECTRONICS OF AMERICA, INC.19145 Gramercy Place, Torrance,California 90501, U.S.A.Tel: 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF CANADA, INC.777 Supertest Road, Toronto,Ontario M3J 2M9, CanadaTel: (416) 736-6211
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.161-165 Princes Highway, HallamVictoria 3803, AustraliaTel: (03) 8787-1200
ALPINE ELECTRONICS (Benelux) GmbHLeuvensesteenweg 510-B61930 Zaventem, BelgiumTel: 02-7251315
ALPINE ELECTRONICS OF U.K., LTD.Alpine House Earlplace Business Park,Fletchamstead Highway, Coventry CV4, 9TWUnited KingdomTel: (2476) 719-500
ALPINE ITALIA S.p.A.Viale C. Colombo 8,20090 Trezzano Sul Naviglio (Ml), ItalyTel: (02) 484-781
Printed in CHINA
ALPINE ELECTRONICS FRANCE S.A.R.L.98,Rue de la Belle Etoile, Z.I. Paris Nord,B.P. 50016, 95945, Roissy Charles de GaulleCedex, FranceTel: (01) 4863-8989
SWR-8D2SWR-8D4
O194 mm [7-5/8"]
O174.8 mm [6-7/8"]
O 2
15 m
m [8
-1/2
"]
21 mm[13/16"]
114.4 mm[4-1/2"]
O 1
75.3
mm
[6-1
5/16
"]
O 1
33 m
m
[5-1
/4"]
Free Air Resonance
Equivalent Stiffness
Mechanical Q
Electrical Q
Total Q
Cone Area
Linear Excursion
Mechanical Travel
SPL
Re
Le
Fs
Vas
Qms
Qes
Qts
Sd
Frequency Response
Power Range
Type-R
Ggneral Specifications
Thiel-Small Parameters
TailleSealed
Power Handling
Magnet Weight
Voice Coil Diameter
Sensibilité(1W/1m)
Résistance CC
Inductance
Résonance à l'airlibre
Raiduer équivalente
Q Méchanique
Q Électrique
Q Total
Surface dudiaphragme
Response en Fréquence
Plage de Puissance
Puisance Admissible
Poids de l'aimant
Diamètre de la bobine
350 W RMS (efficace) / 1000 W PEAK (de crête)
150 W-350 W RMS (efficace)
40 mm (1.6")
SWR-8D4SWR-8D2
52 oz
42 Hz40 Hz
10.5 L ( 0.37 ft3
3.7 Ω+3.7 Ω
6.8
0.62
0.57
83.5 dB
1.85 Ω+1.85 Ω
7.2
0.54
0.50
201 cm2
52 mm
12 mm
4 Ω+4 Ω2 Ω+2 Ω
30 Hz-200 Hz
8"
Sensitivity (1W/1m)
DC Resistance
Inductance
Xmax(1-way)
Xmech (P-P)
Déplacement Mécanique
Displacement Linéare
Note: Specifications subject to change without notice
) 10.3 L ( 0.36 ft3 )
2
High Amplitude Multi-RollSantoprene® Surround(Patent Pending)
Progressive Conex®
Spider with Reinforced Layer Tinsel Leads (US Pat #6,810,988)
ConcealedMount Gasket (Integrated Grille System Ready, US Pat #7,760,900)
Airflow Management & Heat Transfer System (US Pat #7,684,585; #6,678,387)
Compound Radius Curve Extended Pole Geometry (US Pat #6,639,993)
Cast Aluminum Frame with Integral Shorting Sleeve & Radial Vented Heat Sink (US Pat #7,634,101; #7,272,238; other patents pending) 38mm Voice Coil with High-Temp
4-Layer DVC Winding on Spiral Cut
High-Excursion OverhungVoice Coil Configuration
High-Grade Strontium Ferrite Segmented Magnet Assembly
Reinforced Parabolic Cone Structure withPoly-Mica Dust Cap & Pulp-Kevlar Cone Body
Reinforced Cone Neck& Spider Joint
Integrated 8AWG Push Terminals with VC Configuration Jumpers
SWR-1xDx
Example 1 One Amplifier + One SubwooferExemple 1 1 amplificateur et 1 h.-p. d'extrêmes graves
Example 3 Two Amplifiers + One SubwooferExemple 3 1 amplificateur et 1 h.-p. d'extrêmes graves
Example 5 One Amplifier + Two SubwoofersExemple 5 1 amplificateur et 1 h.-p. d'extrêmes graves
Example 7 One Amplifier + Three SubwoofersExemple 7 1 amplificateur et 1 h.-p. d'extrêmes graves
SWR-8D2 / SWR-8D4
TYPE-R WIRING WORKSHEETCÂBLAGE POUR TYPE-R
Example 2 One Amplifier + One SubwooferExemple 2 1 amplificateur et 1 h.-p. d'extrêmes graves
Example 4 Two Amplifiers + One SubwooferExemple 4 1 amplificateur et 1 h.-p. d'extrêmes graves
Example 6 One Amplifier and Two SubwoofersExemple 6 1 amplificateur et 1 h.-p. d'extrêmes graves
Example 8 One Amplifier + Four SubwoofersExemple 8 1 amplificateur et 1 h.-p. d'extrêmes graves
4Ω + 4Ω 2Ω + 2Ω
APPLICATION DIAGRAMS
Caution ! Consult amplifier owner's manual for connection.Attention : lire le manuel de l'amplificateur pour la connexion à .
JUMPER CAVALIER
JUMPER CAVALIER
JUMPER CAVALIER
JUMPER CAVALIER
SWR-1xDx
SWR-1xDx SWR-1xDx
SWR-1xDx SWR-1xDx
SWR-1xDx
SWR-1xDx SWR-1xDx SWR-1xDxSWR-1xDx SWR-1xDx SWR-1xDx SWR-1xDx
2Ω
4Ω
4Ω
4Ω
8Ω1Ω 4Ω
SWR-1xDx
2Ω
2Ω
SWR-1xDx SWR-1xDx
2Ω
2.6Ω 2Ω
Front Mount Displacement* (magnet in)
Reverse Mount Added Volume* (magnet out)-0.050 ft3
+0.035 ft3
*Based upon 3/4" (19mm) baffle thickness, with opening cut approximately to gasket inner diameter
Avant le déplacement du Mont * (aimant)
Inverser Volume mont Ajouté * (des aimants)* Sur la base de l'épaisseur du déflecteur 3/4" (19mm), avec une ouverture coupée à peu près à joint diamètre intérieur
-0.050 pi
+0.035 pi
Notes: 1) Recommended enclosure net lnternal volume is based upon 3/4” (19mm) MDF enclosure construction.2) Consult the table below for altemative enclosure net internal volume calculation.
0.15-0.50 ft
13" x 13" x 5.5"
0.30 ft
0.25 ftD2: 59 Hz, 0.72D4: 59 Hz, 0.72
D2: 59 Hz, 0.72D4: 59 Hz, 0.72
11" x 8.5" x 20"
D2: 32 Hz, 2 dB, 37 HzD4: 32 Hz, 2 dB, 37 Hz
D2: 32 Hz, 2 dB, 37 HzD4: 32 Hz, 2 dB, 37 Hz
0.25-0.7 ft
0.70 ft
5.25 in (7" x 0.75")
0.10 ft
0.55 ft
15.5"
36-40 Hz
SWR-8D2/D4
External Box Dimensions
Gross Internal Volume
Net Internal Volume
External Box Dimensions
Gross Internal Volume
Net Internal Volume (Vb)
Aire de l’évent (dimensions)
Vent Length
Vent Displacement
F3, ripple, Fb
Net Internal Volume
Net Internal Volume
Tuning
0.15-0.50 pi
13 po x 13 po x 5.5 po
0.30 pi
0.25 pi
11 po x 8.5 po x 20 po
0.25-0.7 pi
0.70 pi
5.25 in (7 po x 0.75 po)
0.10 pi
0.55 pi
15.5 po
36-40 Hz
SWR-8D2/D4
Volume intérieur Net ***
recommendedBoîte Scellé
recommendedcharge bass-reflex
Gamme Box Sealed
Gamme charge bass-reflex
Dimensions de la boîte extérieures
Volume intérieur brut
F3, Qtc
Dimensions extérieures
Volume intérieur brut
Volume intérieur Net (Vb)***
Aire de l’évent (dimensions)
Longueur de l’évent
déplacement de l’évent
F3, crête, Fb
Net volume interne
Volume net interne
mise au point
Notes:1) Recommandé enceinte volume net inteme est basée sur 3/4 "(19mm) de construction boîtier en MDF.2) Consulter le tableau ci-dessous pour le calcul de filet d'enclos altemative volume interne.
Sealed Box Range
Recommended Vented Box
Vented Box Range
Recommended Sealed Box
F3, Qtc
3
3
3
3
3
3
3
3
3
3
3
3
3
2