Simulation of β n Emission From Fission Using Evaluated Nuclear Decay Data

22
1 Managed by UT-Battelle for the U.S. Department of Energy Simulation of βn Emission From Fission Using Evaluated Nuclear Decay Data Ian Gauld Marco Pigni Reactor and Nuclear Systems Division May 2, 2013

description

Simulation of β n Emission From Fission Using Evaluated Nuclear Decay Data. May 2, 2013. Ian Gauld Marco Pigni Reactor and Nuclear Systems Division. Nuclear decay data from an end-user perspective. - PowerPoint PPT Presentation

Transcript of Simulation of β n Emission From Fission Using Evaluated Nuclear Decay Data

Page 1: Simulation of  β n Emission From Fission Using Evaluated Nuclear Decay Data

1 Managed by UT-Battellefor the U.S. Department of Energy

Simulation of βn Emission From Fission Using Evaluated Nuclear Decay Data

Ian GauldMarco Pigni

Reactor and Nuclear Systems Division

May 2, 2013

Page 2: Simulation of  β n Emission From Fission Using Evaluated Nuclear Decay Data

2 Managed by UT-Battellefor the U.S. Department of Energy

Nuclear decay data from an end-user perspective.

• Evaluated decay data have major importance to areas of reactor safety and nuclear fuel cycle analysis

• Reactor safety applications include analysis of energy release (decay heat) and beta-delayed neutron emission after fission

• Decay heat impacts safety studies for irradiated nuclear fuel during reactor operation, fuel handling, storage, and disposal

• Delayed neutrons play an important role in reactor control and behavior during transients

• Our group is an end user of decay data

Page 3: Simulation of  β n Emission From Fission Using Evaluated Nuclear Decay Data

3 Managed by UT-Battellefor the U.S. Department of Energy

3

SCALE is a nuclear systems modeling and simulate code used

worldwide for reactor and fuel cycle applications

Disposal

Material processing and fabrication Commercial and research reactors

Interim storage

Transportation and storageReprocessing

• Criticality safety• Radiation shielding• Cross-section processing• Reactor physics• Sensitivity and uncertainty analysis• Spent fuel and HLW characterization

Page 4: Simulation of  β n Emission From Fission Using Evaluated Nuclear Decay Data

4 Managed by UT-Battellefor the U.S. Department of Energy

• ORIGEN – Oak Ridge Isotope GENeration and Depletion code• Irradiation and decay• Calculates

– Time dependent isotopic concentrations– Radioactivity– Decay heat (based on summation)– Radiation sources (neutron/gamma)– Toxicity

• Explicit simulation of 2228 nuclides using evaluated nuclear data• Fast: 0.02 s per time step• ENDF/B-VII.1 nuclear data for:

– 174 actinides– 1151 fission products– 903 structural activation materials

Simulation of Nuclear Fuel

Page 5: Simulation of  β n Emission From Fission Using Evaluated Nuclear Decay Data

5 Managed by UT-Battellefor the U.S. Department of Energy

ENDF/B-VII.1 Nuclear Data LibrariesDecay half lives, branching fractions, energy release− 2226 nuclidesCross sections− ENDF/B-V, -VI, -VII− JEFF-3.0/A special purpose activation fileFission product yields− Energy-dependent yields for 30 actinidesGamma ray production data− X-ray and gamma ray emissions per decayNeutron production data from LANL SOURCES code− Alpha decay energies− Stopping powers− α,n yield cross sections− Spontaneous fission spectral parameters− Delayed neutron spectra for 105 precursor nuclidesAlpha and beta spectra included in next release

Page 6: Simulation of  β n Emission From Fission Using Evaluated Nuclear Decay Data

6 Managed by UT-Battellefor the U.S. Department of Energy

ENDF/B-VII.1 Decay Sublibrary Improvements• Decay data based on the Evaluated Nuclear Structure

Data File (ENSDF), translated into ENDF-6 format• 3817 long-lived ground state or isomer materials• More thorough treatment of the atomic radiation• Improved Q value information• Recent theoretical calculations of the continuous

spectrum from beta-delayed neutron emitters• New TAGS (Total Absorption Gamma-ray Spectroscopy)

data

Page 7: Simulation of  β n Emission From Fission Using Evaluated Nuclear Decay Data

7 Managed by UT-Battellefor the U.S. Department of Energy

Decay Heat Standards• ANS-5.1-2005 and ISO 10645 (1992) widely adopted in reactor

safety codes• Experimentally-based curves developed using groups, fit to

experimental data at short decay times• Groups developed to represent decay times from 1 second to 300

years after fission• Necessitated because nuclear decay data inadequate for short

decay data times at the time of standard development (ANS-5.1-1971 draft, issued 1979)

• Parameters for exponential fits available for four fissionable nuclides, (MeV/s/fission)

Page 8: Simulation of  β n Emission From Fission Using Evaluated Nuclear Decay Data

8 Managed by UT-Battellefor the U.S. Department of Energy

Code Calculations using Evaluated Nuclear Data

Alternate approach to standards-based methods using nuclear decay data and fission yields for all fission products generated by fission– Simulate all fission products explicitly– Provides greater insight into system performance– Contributions from important nuclides, and gamma, beta, and

alpha components– Gamma spectrum for determination of non-local energy

deposition– Provides values for isotopes not considered by the current

Standards– Can evaluate the impact of changes in fission energy (e.g.,

fast reactor systems)

Page 9: Simulation of  β n Emission From Fission Using Evaluated Nuclear Decay Data

9 Managed by UT-Battellefor the U.S. Department of Energy

235U thermal fission

Page 10: Simulation of  β n Emission From Fission Using Evaluated Nuclear Decay Data

10 Managed by UT-Battellefor the U.S. Department of Energy

239Pu thermal fission

Page 11: Simulation of  β n Emission From Fission Using Evaluated Nuclear Decay Data

11 Managed by UT-Battellefor the U.S. Department of Energy

241Pu thermal fission

Page 12: Simulation of  β n Emission From Fission Using Evaluated Nuclear Decay Data

12 Managed by UT-Battellefor the U.S. Department of Energy

238U fast fission

Page 13: Simulation of  β n Emission From Fission Using Evaluated Nuclear Decay Data

13 Managed by UT-Battellefor the U.S. Department of Energy

239Pu thermal fission γ energy

The effect of introducing TAGS data from Algora, (2010) to JEFF-3.1.1 decay data

Testing JEFF-3.1.1 and ENDF/B-VII.1, Cabellos et al., ND2013

Page 14: Simulation of  β n Emission From Fission Using Evaluated Nuclear Decay Data

14 Managed by UT-Battellefor the U.S. Department of Energy

OECD/NEA WPEC 25Decay Heat Analysis

• International Working Party on Evaluation Co-operation of the NEA Nuclear Science Committee NEA/WPEC-25

• VOLUME 25 - Assessment of Fission Product Decay Data for Decay Heat Calculations (2007) http://www.nea.fr/html/science/wpec/volume25/volume25.pdf

• Important to – – Reactor LOCA analysis– Delayed gamma analysis from active

neutron interrogation • Known problems with data• WPEC-25 developed a priority list of

isotopes for re-evaluation

Electromagnetic decay heat following thermal fission burst of 239Pu

Page 15: Simulation of  β n Emission From Fission Using Evaluated Nuclear Decay Data

15 Managed by UT-Battellefor the U.S. Department of Energy

Beta Delayed Neutron Emission

• Current methods in reactor physics analysis rely on a delayed-neutron group representation (Keepin)

• ENDF/B 6-group; JEFF 8-group• Based on theoretical-experimental approach to delayed neutron

emission• Isotopes with similar characteristics combined with an effective

group half life and emission spectra• Ability of nuclear decay data to simulate neutron emission rate

and temporal energy spectra is limited

(n/s/fission)

Page 16: Simulation of  β n Emission From Fission Using Evaluated Nuclear Decay Data

16 Managed by UT-Battellefor the U.S. Department of Energy

βn Emission Simulation with ORIGEN

• Neutron methods in ORIGEN are based on the LANL SOURCES code

• ORIGEN tracks production and decay of 1151 fission product isotopes

• However, the neutron library currently has precursor data for only 105 fission products – in this implementation, delay neutrons are only calculated for the limited number of isotopes in the neutron library (from SOURCES)

• ENDF/B-VII.1 has more than 500 n-emitters• Delayed neutron energy spectra included for each fission

product – stored as multigroup representation used in ENDF/B bins

Page 17: Simulation of  β n Emission From Fission Using Evaluated Nuclear Decay Data

17 Managed by UT-Battellefor the U.S. Department of Energy

ORIGEN βn Calculation – 235U fission

0.000001

0.00001

0.0001

0.001

0.01

0.01 0.1 1 10 100 1000

Neut

ron y

ield

(n/fi

ssion

/sec)

Time (s)

Keepin ORIGEN

0

2000

4000

6000

8000

10000

0 0.5 1 1.5

Dela

yed N

eutro

n Yiel

d [n

/sec]

Energy [MeV]

0.5 s1.0 s1.5 s2.0 s2.6 s

Page 18: Simulation of  β n Emission From Fission Using Evaluated Nuclear Decay Data

18 Managed by UT-Battellefor the U.S. Department of Energy

Recent Studies at UPM Calculations performed with JEFF-3.1.1 and ENDF/B-VII.1

JEFF 3.1.1: 241 n-emitters, 18 2n-emitters and 4 3n-emittersENDF/B-VII.1: 390 n-emitters, 111 2n-emitters, 14 3n-emitters and 2 4n-emitters

1.0E-06

1.0E-05

1.0E-04

1.0E-03

1.0E-02

1.0E-01

0.01 0.1 1 10 100 1000

Neu

tron

em

issi

on b

y 1

fissi

on (n

/s)

Time after fission burst (s)

Keepin-JEFF-3.1.1

n_emiss_rate (JEFF-3.1.1)- My work

Keepin-ENDF/B-VII.1

n_emiss_rate (ENDF/B-VII.1)- My work

Testing JEFF-3.1.1 and ENDF/B-VII.1, Cabellos et al., ND2013

At t=0 s, >100% difference between ENDF/B-VII.1 6-group data and summation calculations using ENDF/B-VII.1 decay and yield data

Comparison of delayed neutron emission rate calculated using Keepin 6/8-group formula and Decay&FY Data after a fission pulse in 235U

Page 19: Simulation of  β n Emission From Fission Using Evaluated Nuclear Decay Data

19 Managed by UT-Battellefor the U.S. Department of Energy

New Developments in Uncertainty Analysis

A stochastic nuclear data sampling approach is implemented in the next release of SCALE

• Defines uncertainty distributions and correlations for all nuclear data

• Reaction cross sections• Fission yields• Nuclear decay data

• Executes any SCALE code using perturbed data parameters for uncertainty analysis

• Performs parallel computations using MPI or OpenMP • Response uncertainty computed by automated statistical analysis

of output response distribution

Page 20: Simulation of  β n Emission From Fission Using Evaluated Nuclear Decay Data

20 Managed by UT-Battellefor the U.S. Department of Energy

Frequency Distributions of Sampled Values

Group 1 nu-fission ; 30 GWD/T

Kinf ; 60 GWD/TKinf ; 0 GWD/T

Tc-99 concentration; 50 GWD/T

Page 21: Simulation of  β n Emission From Fission Using Evaluated Nuclear Decay Data

21 Managed by UT-Battellefor the U.S. Department of Energy

Uncertainty analysis – 235U fission

300 years

Page 22: Simulation of  β n Emission From Fission Using Evaluated Nuclear Decay Data

22 Managed by UT-Battellefor the U.S. Department of Energy

Summary and Conclusions• New detectors are being used to obtain improved

nuclear decay data– Gamma calorimeter– Neutron detectors

• Improved data impact delayed energy release (total and gamma decay heat) and delayed neutron emission

• Work initiated to integrate new measurements with the ORIGEN simulation code

• Planned performance evaluation using comparisons with benchmarks and other measurement data

• Complete uncertainty analysis now possible

MTAS

3Hen

VANDLE