SDS M2000-148 FREE FLOAT STEAM TRAP - TLV · SDS M2000-148 Features FREE FLOAT STEAM TRAP WITH...
2
Copyright FREE FLOAT ® STEAM TRAP MODEL J3X Specifications Model Connection Size (mm) Orifice No. Maximum Operating Pressure (MPaG) PMO Maximum Differential Pressure (MPa) Δ PMX Minimum Operating Pressure (MPaG) Maximum Operating Temperature (°C) TMO Subcooling of X-element Fill (°C) Type of X-element No. q w e F r t MR y R u MR i R o MR !0 !1 R !2 R !3 R !4 R !5 R !6 !7 !8 !9 MR @0 @1 J3X Screwed JF3X Flanged 15, 20, 25 0.01 220 up to 6 B PRESSURE SHELL DESIGN CONDITIONS (NOT OPERATING CONDITIONS): 1 MPa = 10.197 kg/cm 2 Maximum Allowable Pressure (MPaG) PMA: 2.1 (J3X), 1.6 (JF3X) Maximum Allowable Temperature (°C) TMA: 220 * Equivalent ** Option Replacement kits available: (M) maintenance parts, (R) repair parts, (F) float To avoid abnormal operation, accidents or serious injury, DO NOT use this product outside of the specification range. Local regulations may restrict the use of this product to below the conditions quoted. CAUTION Description Material JIS ASTM/AISI* Body J3X JF3X Cover Float Orifice Holder Plug Orifice Plug Gasket Orifice Orifice O-Ring Screen inside/outside Cover Gasket Nameplate Float Cover X-element Guide X-element Spring Clip Air Vent Valve Seat Connector Cover Bolt Plug Plug Gasket Drain Plug Gasket** Drain Plug** Ductile Cast Iron Cast Iron Ductile Cast Iron Stainless Steel Carbon Steel Fluorine Resin — Ethylene Propylene Rubber Stainless Steel Fluorine Resin Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Carbon Steel Carbon Steel Fluorine Resin Soft Iron Carbon Steel FCD450 FCV410 FCD450 SUS316L S25C PTFE — EPR SUS430/304 PTFE SUS304 SUS304 SUS304 — SUS304 SUS420F SUS416 S45C S25C PTFE SUYP S25C A536 A842 Gr.400 A536 AISI316L AISI1025 PTFE — D2000CA AISI430/304 PTFE AISI304 AISI304 AISI304 — AISI304 AISI420F AISI416 AISI1045 AISI1025 PTFE AISI1010 AISI1025 2, 5, 8, 10, 16 0.2, 0.5, 0.8, 1.0, 1.6 0.2, 0.5, 0.8, 1.0, 1.6 2, 5, 8, 10, 21 0.2, 0.5, 0.8, 1.0, 2.1 0.2, 0.5, 0.8, 1.0, 2.1 Optional lock release valve LR3 available for special applications. @1 @0 q e !1 i !4 o !7 w !0 !9 !8 !5 !2 !3 !6 r t y u SDS M2000-148 Features FREE FLOAT STEAM TRAP WITH THERMOSTATIC AIR VENTING A reliable and durable ductile cast iron or cast iron steam trap with tight shut-off for use on small-size process equipment. 1. Self-modulating free float provides continuous, smooth, low velocity condensate discharge as process loads vary. 2. Only one moving part, the free float, prevents concentrated wear and provides long maintenance-free service life. 3. Thermostatic capsule (X-element) with “fail open” feature vents air automatically until close-to-steam temperature. 4. Built-in screen with large surface area ensures extended trouble-free operation. 5. Easy, inline access to internal parts simplifies cleaning and reduces maintenance costs.
Transcript of SDS M2000-148 FREE FLOAT STEAM TRAP - TLV · SDS M2000-148 Features FREE FLOAT STEAM TRAP WITH...
Copyright
FREE FLOAT®
STEAM TRAPMODEL J3X
Specifications
ModelConnectionSize (mm)Orifice No.Maximum Operating Pressure (MPaG) PMOMaximum Differential Pressure (MPa) ΔPMXMinimum Operating Pressure (MPaG)Maximum Operating Temperature (°C) TMOSubcooling of X-element Fill (°C)Type of X-element
No.
q
w
eF
r
tMR
yR
uMR
iR
oMR
!0
!1R
!2R
!3R
!4R
!5R
!6
!7
!8
!9MR
@0
@1
J3X
Screwed
JF3X
Flanged15, 20, 25
0.01220
up to 6B
PRESSURE SHELL DESIGN CONDITIONS (NOT OPERATING CONDITIONS): 1 MPa = 10.197 kg/cm2
Maximum Allowable Pressure (MPaG) PMA: 2.1 (J3X), 1.6 (JF3X)Maximum Allowable Temperature (°C) TMA: 220
* Equivalent ** Option Replacement kits available: (M) maintenance parts, (R) repair parts, (F) float
To avoid abnormal operation, accidents or serious injury, DO NOT use this product outside of the specification range. Local regulations may restrict the use of this product to below the conditions quoted.CAUTION
Description Material JIS ASTM/AISI*
Body J3X JF3XCover FloatOrifice Holder Plug Orifice Plug GasketOrifice Orifice O-RingScreen inside/outsideCover GasketNameplateFloat CoverX-element GuideX-elementSpring ClipAir Vent Valve SeatConnectorCover Bolt Plug Plug GasketDrain Plug Gasket**Drain Plug**
Ductile Cast IronCast IronDuctile Cast IronStainless SteelCarbon SteelFluorine Resin —Ethylene Propylene Rubber Stainless SteelFluorine ResinStainless SteelStainless SteelStainless SteelStainless SteelStainless SteelStainless SteelStainless SteelCarbon SteelCarbon SteelFluorine ResinSoft IronCarbon Steel
FCD450FCV410FCD450SUS316LS25CPTFE
—EPRSUS430/304PTFESUS304SUS304SUS304
—SUS304SUS420FSUS416S45CS25CPTFESUYPS25C
A536A842 Gr.400A536AISI316LAISI1025PTFE
—D2000CAAISI430/304PTFEAISI304AISI304AISI304
—AISI304AISI420FAISI416AISI1045AISI1025PTFEAISI1010AISI1025
2, 5, 8, 10, 160.2, 0.5, 0.8, 1.0, 1.60.2, 0.5, 0.8, 1.0, 1.6
2, 5, 8, 10, 210.2, 0.5, 0.8, 1.0, 2.10.2, 0.5, 0.8, 1.0, 2.1
Optional lock release valve LR3 available for special applications.
@1
@0 qe
!1i
!4o!7w!0!9 !8
!5!2!3!6
r
t
yu
SDS M2000-148
Features
FREE FLOAT STEAM TRAP WITH THERMOSTATIC AIR VENTING
A reliable and durable ductile cast iron or cast iron steam trap with tight shut-off for use on small-size process equipment.1. Self-modulating free float provides continuous,
smooth, low velocity condensate discharge as process loads vary.
2. Only one moving part, the free float, prevents concentrated wear and provides long maintenance-free service life.
3. Thermostatic capsule (X-element) with “fail open” feature vents air automatically until close-to-steam temperature.
4. Built-in screen with large surface area ensures extended trouble-free operation.
5. Easy, inline access to internal parts simplifies cleaning and reduces maintenance costs.
(O)
Copyright http://www.tlv.com
Weight (kg)WH1H
120
L
Dimensions
Discharge Capacity
1. Line numbers within the graph refer to orifice numbers.2. Differential pressure is the difference between the inlet and outlet pressure of the trap.3. Capacities are based on continuous discharge of condensate 6°C below saturated steam temperature.4. Recommended safety factor: at least 1.5.
Size
152025
757375
130
13780
2.72.83.0
* Rc(PT), other standards available
Dis
char
ge
Cap
acity
(kg/
h)
Differential Pressure (MPa)
DO NOT use traps under conditions that exceed maximum differential pressure,as condensate backup will occur!CAUTION
L W
H
H
L
Differential Pressure (kg/cm2)
Weight*(kg)
LH H1
125FF (150RF) 250RF (300RF)
3.85.16.0
ASME ClassSize
( ) No ASME standard exists for cast iron; machined to fit steel flangesClass 125 FF can connect to 150 RF, 250 RF can connect to 300 RFOther standards available, but length and weight may vary* Weight is for Class 250 RF / 300 RF
798991
127133140
––
203
175195215
––
215
175195219
(15)(20)25
J3X Screwed J3X Screwed* (mm)
JF3X Flanged JF3X Flanged (mm)
H1
H1
285
10 21
2.12.01.0 1.60.5 0.80.30.20.10.050.030.01
60
80
100
200
300
400
600
800
2021
10 165 83210.50.30.1
16
SDS M2000-148 Rev. 2/2017Products for intended use only.
Specifications subject to change without notice.
![The behaviour of aging functions in one-dimensional Bouchaud’s trap model · 2018. 8. 14. · Bouchaud’strap model (BTM) was introducedin [Bou92] asa phenomenological model for](https://static.fdocument.org/doc/165x107/60e632fcc5708e0a5f54e85b/the-behaviour-of-aging-functions-in-one-dimensional-bouchaudas-trap-model-2018.jpg)
