Scanspeak Full V10

22
Model Imp Ω Fs Hz Qts Vas Ltrs Power dB 2.83V/m Xmax mm P Box Liter Sealed/Vented F3 Hz Price Each Illuminator Series Tweeters D2004/6020-00: ¾" dome tweeter, 55.5mm Ø, metal grill, chamber 4 600 60 88.4 0.2 $121.85 D3004/6020-00: 1" dome tweeter, 62mm Ø, metal grill, chamber 4 700 50 89.2 0.2 $124.55 D3004/6020-10: 1" dome tweeter, 62nn Ø, metal grill, deep chamber 4 425 50 89.6 0.2 $130.90 R2004/6020-00: ¾" ring radiator, 55.5mm Ø, metal grill, chamber 4 600 60 86.9 0.2 $152.40 R3004/6020-00: 1" ring radiator, 62mm Ø, metal grill, chamber 4 625 50 87.4 0.2 $157.30 R3004/6020-10: 1" ring radiator, 62mm Ø, metal grill, deep chamber 4 420 50 87.4 0.2 $164.65 D3004/6640-00: 1" Beryllium dome, AirCirc neo. magnet, Black 4 490 [email protected] 90.7 0.2 $508.20 D3004/6600-00: 1" dome, AirCirc, neodymium magnet 4 500 [email protected] 91.6 0.2 $212.95 D3004/6620-00: 1" dome, AirCirc, neo magnet, rubber front, Black 4 500 [email protected] 91.6 0.2 $232.65 D3004/6620-01: 1" dome, AirCirc, neo magnet, rubber front, Silver 4 500 [email protected] 91.6 0.2 $232.65 R3004/6620-00: 1" ring radiator, AirCirc, neo, rubber front, Black 4 520 [email protected] 90.4 0.2 $271.35 R3004/6620-01: 1" ring radiator, AirCirc, neo, rubber front, Silver 4 520 [email protected] 90.4 0.2 $271.35 Illuminator Series Midranges 12MU/4731T: 4" midrange, paper cone, neo magnet, underhung VC 4 64 0.24 5.4 80 90 3.5 0.1 / 0.1 190 / 115 $298.70 12MU/8731T: 4" midrange, paper cone, neo magnet, underhung VC 8 66 0.29 5.9 80 87.2 3.5 0.1 / 0.1 190 / 115 $298.70 Illuminator Series Woofers 15WU/4741T: 5.25" woofer, paper cone, neo magnet, underhung VC 4 34 0.23 20.1 80 85.9 9 0.15 / 0.25 115 / 60 $342.15 15WU/8741T: 5.25" woofer, paper cone, neo magnet, underhung VC 8 35 0.26 20.1 80 83.4 9 0.15 / 0.25 105 / 58 $342.15 18WU/4741T: 6.5" woofer, paper cone, neo magnet, underhung VC 4 30 0.29 49.9 80 87.2 9 0.25 / 0.5 80 / 55 $341.40 18WU/8741T: 6.5" woofer, paper cone, neo magnet, underhung VC 8 31 0.33 49 80 85.4 9 0.35 / 0.6 70 / 50 $341.40 18WU/4747T: 6.5" woofer, aluminum cone, neo magnet, underhung 4 32 0.28 48.7 80 88.1 9 0.2 / 0.45 97 / 59 $325.50 18WU/8747T: 6.5" woofer, aluminum cone, neo magnet, underhung 8 33 0.31 49.2 80 85.5 9 0.25 / 0.6 84 / 55 $325.50 Revelator Series Tweeters R2904/7000-00: Premium Ring Radiator - Silver 4 520 [email protected] 94.5 0.2 $371.15 R2904/7000-05: Premium Ring Radiator - Black w/silver plug 4 520 [email protected] 94.5 0.2 $371.15 R2904/7000-09: Premium Ring Radiator - Black 4 520 [email protected] 94.5 0.2 $371.15 D2904/7100-02: Premium Wide Surround Tweeter - Silver 4 520 [email protected] 94.5 0.2 $312.30 D2904/7100-03: Premium Wide Surround Tweeter - Black 4 520 [email protected] 94.5 0.2 $312.30 D2905/9900: 1” textile dome, SD-2, LCD, NRC, CDD 8 500 [email protected] 91 0.4 $262.30 Revelator Series Midranges 12M/4631G: 4.5” slit paper cone, neodymium magnet, R3 4 75 0.33 2.4 40@75 89 3.0 0.7 / 1.0 160 / 100 $314.20 15M/4531K: 5" slit paper cone midrange, Glass former 4 35 0.22 24 90 3.0 3.0 / 5.0 100 / 70 $223.80 Revelator Series Mid/Bass & Woofers 15W/4531G: 5” slit paper cone, NRCS, SD-1, R3, Glass former 4 39.5 0.32 16 60 87 6.5 4 / 6 88 / 58 $235.70 15W/8530K-00: 5” paper cone, NRCS, SD-1, R3, Glass former 8 30 0.27 28 60 85.5 6.5 5.1 / 7.4 77 / 55 $213.90 15W/8530K-01: 5” paper cone, NRCS, SD-1, R3, Glass former 8 30 0.35 28 60 84.5 6.5 9.5 / 15 60 / 40 $223.70 18W/4531G: 7" slit paper cone, SD-1, R3, Glass former 4 33 0.35 42 70 90 6.5 14 / 23 65 / 41 $237.05 18W/8531G: 7” slit paper cone, SD-1, R3, Glass former 8 28 0.36 59 60 87 6.5 21 / 36 54 / 35 $237.05 22W/4851T: 8" hard paper cone, SD-1, Titanium former 4 20.5 0.22 127 170 89 9.0 10 / 28 70 / 40 $374.40 22W/8851T: 8" hard paper cone, SD-1, Titanium former 8 21 0.25 127 170 88 9.0 18 / 34 60 / 38 $374.40 22W/8857T: 8" Black Aluminum cone, SD-1, Titanium former 8 23 0.30 89 170 89 9.0 14 / 35 60 / 38 $348.95 26W/8861T: 10" hard paper cone, SD-1, Titanium former 8 19 0.31 234 170 88.5 9.0 55 / 90 40 / 28 $416.70 26W/4867T: 10" Black Aluminum cone, SD-1, Titanium former 4 18 0.30 223 170 89 9.0 46 / 71 43 / 29 $381.30 26W/8867T: 10" Black Aluminum cone, SD-1, Titanium former 8 19 0.29 179 170 87 9.0 36 / 57 46 / 31 $381.30 23W/4557T-00: 10" Aluminum Cone, SD-1, Titanium former, Silver 4 20.5 0.44 43.5 225 83 13 28 / 59 33 / 27 $434.20 23W/0-00-00: 10" Aluminum Cone Passive Radiator, Silver Fs 10.5 Hz, Sd 232 cm 2 , Mms 400g, Vas 43.5 Ltrs, Qms 11.5, Excursion + 20mm $166.90 23W/4557T-02: 10" Aluminum Cone, SD-1, Titanium former, Black 4 20.5 0.44 43.5 225 83 13 28 / 59 33 / 27 $434.20 23W/0-00-02: 10" Aluminum Cone Passive Radiator, Black Fs 10.5 Hz, Sd 232 cm 2 , Mms 400g, Vas 43.5 Ltrs, Qms 11.5, Excursion + 20mm $166.90 Classic Series Tweeters D2008/8512: ¾" dome, chamber 8 800 150#4k 90 0.7 $77.45 D2010/8513: ¾” dome, chamber, foam on faceplate, ff 8 800 150@4k 90 0.7 $83.85 D2905/9300: 1” textile dome, chamber, FF 8 650 [email protected] 90 0.4 $122.55 D2905/9500: 1” textile dome, NRC, FF 8 550 [email protected] 90 0.4 $140.15 D2905/9700: 1” textile dome, SD-2, LCD, NRC 8 500 [email protected] 89.5 0.4 $180.25 D2904/9800: 1” aluminum dome, diffuser, SD-2, NRC 4 500 [email protected] 90 0.1 $214.00

description

ScanSpeak Driver Description and Price LIst

Transcript of Scanspeak Full V10

Page 1: Scanspeak Full V10

Model Imp Ω

Fs Hz Qts Vas Ltrs

Power dB2.83V/m

Xmaxmm P

Box Li ter Sealed/Vented

F3 Hz PriceEach

Il lu mi na tor Se ries TweetersD2004/6020-00: ¾" dome tweeter, 55.5mm Ø, metal grill, chamber 4 600 60 88.4 0.2 $121.85

D3004/6020-00: 1" dome tweeter, 62mm Ø, metal grill, chamber 4 700 50 89.2 0.2 $124.55

D3004/6020-10: 1" dome tweeter, 62nn Ø, metal grill, deep cham ber 4 425 50 89.6 0.2 $130.90

R2004/6020-00: ¾" ring ra di a tor, 55.5mm Ø, metal grill, chamber 4 600 60 86.9 0.2 $152.40

R3004/6020-00: 1" ring ra di a tor, 62mm Ø, metal grill, cham ber 4 625 50 87.4 0.2 $157.30

R3004/6020-10: 1" ring ra di a tor, 62mm Ø, metal grill, deep cham ber 4 420 50 87.4 0.2 $164.65

D3004/6640-00: 1" Be ryl lium dome, AirCirc neo. mag net, Black 4 490 [email protected] 90.7 0.2 $508.20

D3004/6600-00: 1" dome, AirCirc, neo dym ium mag net 4 500 [email protected] 91.6 0.2 $212.95

D3004/6620-00: 1" dome, AirCirc, neo mag net, rub ber front, Black 4 500 [email protected] 91.6 0.2 $232.65

D3004/6620-01: 1" dome, AirCirc, neo mag net, rub ber front, Silver 4 500 [email protected] 91.6 0.2 $232.65

R3004/6620-00: 1" ring ra di a tor, AirCirc, neo, rub ber front, Black 4 520 [email protected] 90.4 0.2 $271.35

R3004/6620-01: 1" ring ra di a tor, AirCirc, neo, rub ber front, Silver 4 520 [email protected] 90.4 0.2 $271.35

Il lu mi na tor Se ries Midranges12MU/4731T: 4" midrange, pa per cone, neo mag net, under hung VC 4 64 0.24 5.4 80 90 3.5 0.1 / 0.1 190 / 115 $298.70

12MU/8731T: 4" midrange, pa per cone, neo mag net, under hung VC 8 66 0.29 5.9 80 87.2 3.5 0.1 / 0.1 190 / 115 $298.70

Il lu mi na tor Se ries Woofers15WU/4741T: 5.25" woofer, pa per cone, neo mag net, under hung VC 4 34 0.23 20.1 80 85.9 9 0.15 / 0.25 115 / 60 $342.15

15WU/8741T: 5.25" woofer, pa per cone, neo magnet, under hung VC 8 35 0.26 20.1 80 83.4 9 0.15 / 0.25 105 / 58 $342.15

18WU/4741T: 6.5" woofer, pa per cone, neo mag net, under hung VC 4 30 0.29 49.9 80 87.2 9 0.25 / 0.5 80 / 55 $341.40

18WU/8741T: 6.5" woofer, pa per cone, neo mag net, under hung VC 8 31 0.33 49 80 85.4 9 0.35 / 0.6 70 / 50 $341.40

18WU/4747T: 6.5" woofer, alu mi num cone, neo mag net, underhung 4 32 0.28 48.7 80 88.1 9 0.2 / 0.45 97 / 59 $325.50

18WU/8747T: 6.5" woofer, alu mi num cone, neo mag net, under hung 8 33 0.31 49.2 80 85.5 9 0.25 / 0.6 84 / 55 $325.50

Rev e la tor Se ries TweetersR2904/7000-00: Pre mium Ring Ra di a tor - Sil ver 4 520 [email protected] 94.5 0.2 $371.15

R2904/7000-05: Pre mium Ring Ra di a tor - Black w/sil ver plug 4 520 [email protected] 94.5 0.2 $371.15

R2904/7000-09: Pre mium Ring Ra di a tor - Black 4 520 [email protected] 94.5 0.2 $371.15

D2904/7100-02: Pre mium Wide Sur round Tweeter - Sil ver 4 520 [email protected] 94.5 0.2 $312.30

D2904/7100-03: Pre mium Wide Sur round Tweeter - Black 4 520 [email protected] 94.5 0.2 $312.30

D2905/9900: 1” tex tile dome, SD-2, LCD, NRC, CDD 8 500 [email protected] 91 0.4 $262.30

Rev e la tor Se ries Midranges12M/4631G: 4.5” slit pa per cone, neo dym ium mag net, R3 4 75 0.33 2.4 40@75 89 3.0 0.7 / 1.0 160 / 100 $314.20

15M/4531K: 5" slit pa per cone midrange, Glass former 4 35 0.22 24 90 3.0 3.0 / 5.0 100 / 70 $223.80

Rev e la tor Se ries Mid/Bass & Woofers15W/4531G: 5” slit pa per cone, NRCS, SD-1, R3, Glass former 4 39.5 0.32 16 60 87 6.5 4 / 6 88 / 58 $235.70

15W/8530K-00: 5” pa per cone, NRCS, SD-1, R3, Glass former 8 30 0.27 28 60 85.5 6.5 5.1 / 7.4 77 / 55 $213.90

15W/8530K-01: 5” pa per cone, NRCS, SD-1, R3, Glass for mer 8 30 0.35 28 60 84.5 6.5 9.5 / 15 60 / 40 $223.70

18W/4531G: 7" slit pa per cone, SD-1, R3, Glass for mer 4 33 0.35 42 70 90 6.5 14 / 23 65 / 41 $237.05

18W/8531G: 7” slit pa per cone, SD-1, R3, Glass former 8 28 0.36 59 60 87 6.5 21 / 36 54 / 35 $237.05

22W/4851T: 8" hard pa per cone, SD-1, Ti ta nium for mer 4 20.5 0.22 127 170 89 9.0 10 / 28 70 / 40 $374.40

22W/8851T: 8" hard pa per cone, SD-1, Titanium for mer 8 21 0.25 127 170 88 9.0 18 / 34 60 / 38 $374.40

22W/8857T: 8" Black Alu mi num cone, SD-1, Ti ta nium former 8 23 0.30 89 170 89 9.0 14 / 35 60 / 38 $348.95

26W/8861T: 10" hard pa per cone, SD-1, Ti ta nium for mer 8 19 0.31 234 170 88.5 9.0 55 / 90 40 / 28 $416.70

26W/4867T: 10" Black Alu mi num cone, SD-1, Ti ta nium for mer 4 18 0.30 223 170 89 9.0 46 / 71 43 / 29 $381.30

26W/8867T: 10" Black Alu mi num cone, SD-1, Ti ta nium for mer 8 19 0.29 179 170 87 9.0 36 / 57 46 / 31 $381.30

23W/4557T-00: 10" Alu mi num Cone, SD-1, Ti ta nium for mer, Silver 4 20.5 0.44 43.5 225 83 13 28 / 59 33 / 27 $434.20

23W/0-00-00: 10" Alu mi num Cone Pas sive Ra di a tor, Silver Fs 10.5 Hz, Sd 232 cm2, Mms 400g, Vas 43.5 Ltrs, Qms 11.5, Ex cur sion +20mm $166.90

23W/4557T-02: 10" Alu mi num Cone, SD-1, Ti ta nium for mer, Black 4 20.5 0.44 43.5 225 83 13 28 / 59 33 / 27 $434.20

23W/0-00-02: 10" Alu mi num Cone Pas sive Ra di a tor, Black Fs 10.5 Hz, Sd 232 cm2, Mms 400g, Vas 43.5 Ltrs, Qms 11.5, Ex cur sion +20mm $166.90

Clas sic Se ries Tweet ersD2008/8512: ¾" dome, chamber 8 800 150#4k 90 0.7 $77.45

D2010/8513: ¾” dome, cham ber, foam on face plate, ff 8 800 150@4k 90 0.7 $83.85

D2905/9300: 1” tex tile dome, cham ber, FF 8 650 [email protected] 90 0.4 $122.55

D2905/9500: 1” tex tile dome, NRC, FF 8 550 [email protected] 90 0.4 $140.15

D2905/9700: 1” tex tile dome, SD-2, LCD, NRC 8 500 [email protected] 89.5 0.4 $180.25

D2904/9800: 1” alu mi num dome, dif fuser, SD-2, NRC 4 500 [email protected] 90 0.1 $214.00

Page 2: Scanspeak Full V10

Model Imp Ω

Fs Hz Qts Vas Ltrs

Power dB2.83V/m

Xmaxmm P

Box Li ter Sealed/Vented

F3 Hz PriceEach

Clas sic Se ries Mid/TweeterD3806/8200: 1.5" tex tile dome mid/tweeter 8 450 [email protected] 89 0.4 $192.00

Clas sic Se ries Woofers18W/8535: 7” car bon pa per cone, SD-1, R3 8 26 0.38 72 70 86.5 5.0 30 / 46 48 / 33 $182.95

18W/8542: 7" pa per cone, SD mo tor, foam surround 8 30 0.22 49 70 89 6.5 4 / 14 107 / 58 $194.40

18W/8545: 7” car bon pa per cone, SD-1, R3 8 28 0.27 48 100 88 6.5 8 / 15 75 / 46 $174.40

18W/8545K: 7” car bon pa per cone, SD-1, R3, Glass former 8 28 0.28 48 100 87.5 6.5 9 / 19 70 / 42 $170.15

21W/8555:8" pa per/carbon cone woofer, SD-1 8 20 0.31 134 100 87 5.5 20 / 35 55 / 36 $247.75

26W/8565: 10" pa per/car bon cone woofer, SD-1 8 20 0.41 225 100 88 6.5 60 / - 40 / - $259.20

Dis cov ery Se ries Dome Tweet ersD2606/9200: 1" tex tile dome tweeter 6 1100 [email protected] 91.4 0.5 $36.65

D2606/9220: 1" tex tile dome tweeter with cham ber, vented pole piece 6 650 100@2k 91 0.5 $51.90

D2604/8330: 1" tex tile dome, large roll surround 4 475 100@2k 94.1 0.3 $53.90

D2608/9130: 1" tex tile dome, dou ble mag net, high efficiency 8 700 100@2k 91.3 0.5 $81.40

R2604/8320: 1" tex tile ring tweeter, wave guide, chamber 4 550 100@2k 90.8 0.2 $54.45

R2604/8330: 1" tex tile ring dome tweeter, wave guide, dou ble magnet 4 630 100@2k 91.9 0.2 $63.80

Dis cov ery Se ries MidrangesD7608/9200-10: 3" tex tile dome midrange, needs cham ber on back 8 300 80@500 92 0.5 1 / - 500 / - $103.10

10F/4424G: 4" fi ber glass cone midrange, neo dym ium magnet 4 90 0.30 2.06 15RMS 89.8 2.6 1.5 / - 270 / - $100.95

10F/8424G: 4" fi ber glass cone midrange, neo dym ium mag net 8 90 0.37 2.1 15RMS 86.6 2.6 1.5 / - 210 / - $100.95

15M/4624G: 5" fi ber glass cone midrange, phase plug, 24mm VC 4 100 0.43 3.6 75RMS 92.4 1.5 2.5 / - 205 / - $77.85

Dis cov ery Se ries Woofers12W/4524G: 5" fi ber glass cone woofer, 24mm VC 4 50 0.27 8.2 40RMS 88.8 1.5 2 / 3 145 / 80 $64.90

12W/8524G: 5" fi ber glass cone woofer, 24mm VC 8 52 0.32 8.2 40 RMS 85.8 1.5 2 / 4.5 135 / 75 $64.90

15W/4434G: 5" fi ber glass cone woofer, short ing ring, 34mm VC 4 43 0.21 12.9 60RMS 89.7 4.3 3 / 3.5 160 / 80 $70.70

15W/8434G: 5" fi ber glass cone woofer, short ing ring, 34mm VC 8 45 0.25 12.9 60RMS 86.9 4.2 3 / 5 145 / 75 $70.70

18W/4434G: 6" fi ber glass cone woofer, short ing ring, 34mm VC 4 39 0.29 28.5 60RMS 90.8 4.3 5 / 12 100 / 60 $73.75

18W/8434G: 6" fi ber glass cone woofer, short ing ring, 34mm VC 8 40 0.34 28.5 60RMS 88 4.2 6 / 15 90 / 55 $73.75

22W/4534G: 8" fi ber glass cone woofer, short ing ring, 34mm VC 4 30 0.34 95 70RMS 92.4 5.7 18 / 45 75 / 40 $88.20

22W/8534G: 8" fi ber glass cone woofer, short ing ring, 34mm VC 8 30 0.39 94.2 70RMS 88.8 5.8 18 / 45 75 / 40 $88.20

26W/4534G: 10" fi ber glass cone woofer, short ing ring 34mm VC 4 23 0.36 156 70RMS 90.5 6 35 / 85 55 / 32 $106.40

26W/8534G: 10" fi ber glass cone woofer, short ing ring 34mm VC 8 23 0.40 150 70RMS 89 6 45 / 100 50 / 31 $106.40

Dis cov ery Se ries Subwoofers and Pas sive Radiators26W/4558T: 10" Alu mi num cone subwoofer, short ing ring 4 20 0.28 104 150RMS 89 12.5 - / 56 - / 28 $247.40

26W/0-00: 10" Alu mi num cone pas sive ra di a tor 400 gram Use with 26W/4558T in 1 cu bic foot for F3 of 35Hz use amp with 25Hz boost $132.75

30W/4558T: 12" Alu mi num cone subwoofer, short ing ring 4 21 0.34 147 150RMS 89 12.5 - / 90 - / 26 $270.30

30W/0-00: 12" Alu mi num cone pas sive ra di a tor 425 gram Use with 30W/4558T in 2 cu bic feet for F3 of 30Hz $158.15

Dis cov ery Se ries Autosound Com po nent Systems820012: 5" 2-way Com po nent Sys tem, 2x 5" fi ber glass cone woof ers, 2x 19mm ring dome tweet ers with flush/wedge mounts, 2x 2500Hz cross overs $432.00

820013: 6" 2-way Com po nent Sys tem, 2x 6" fi ber glass cone woof ers, 2x 19mm ring dome tweet ers with flush/wedge mounts, 2x 3000Hz cross overs $450.00

290001: Scan speak flow re sis tive aperiodic vent, used to lower the box Q of a sealed box. It makes the driver be have as if the box is 25% larger. Each $14.70

127001: Scan speaker grill for Clas sic 18W woof ers, does not fit the Rev e la tor or Il lu mi na tor woof ers. Each $15.00

Clas sic Vifa Driv ers Built by Scan-SpeakP13WH00-08: 5" min eral filled poly cone, 140mm cast frame 8 60 0.33 10 40 88 4 3 / 6 145 / 80 $76.20

P17WJ00-08: 6.5" min eral filled poly cone, 170mm cast frame 8 37 0.35 34.7 40 88 4 8 / 15 90 / 55 $76.90

P21WO20-08: 8" min eral filled poly cone, 215mm cast frame 8 28 0.33 113 80 91 4 20 / 45 70 / 40 $85.55

Founded in 1970, Scan-Speak still resides at our original address in Videbaek, Denmark. Located in the heart of the Jutlandpeninsula, our acoustic engineers adhere to our legendary policy of "Never compromise". We never compromise on our productquality, sound quality or pursuit of perfection in a given application. We set the loudspeaker industry's gold standard for audiophiles,and are constantly viewed as a market benchmark by other high-end speaker manufacturers.

For close to 40 years, Scan-Speak has been on a quest to create transducers that reveal the finest details in recordings, concealingnothing from the listener. This quest has resulted in several revolutionary inventions, where distortion in the magnet systems and themoving parts of the speaker is minimized. Our philosophy is simple: the emitted sound must be dynamic, giving a transient responseand providing tonal balance.

Page 3: Scanspeak Full V10

Illuminator D2004/6020-00 4Ω

TECHNICAL DATA:Sensitivity 2.83V/1M 88.4dB Free air resonance Fs 600 HzDC resistance 3.4 ohmV.C. inductance 0.02 mHPower 12dB@Hz 50WEffective cone area 4.5 cm2

V.C. diameter 19 mmV.C. height 1.8 mmAir gap height 2.5 mm

Lin. & max. excursion ±0.4 / ±01.8mmForce factor BL Product 1.3 TmMoving mass incl. air 0.22 gOutside diameter 55.5 mmCutout diameter 42.1 mmFlange thickness 5 mmDepth 29.3 mmScrew Circle 47.6 mm

The face plates are die cast inaluminum for a beautiful look withmaximum mechanical stability.

D2004/602000 is optimized tooffer small package sizes that can fit into tight spaces such as compactcabinets and automotive trim pieces. The back chamber is die cast inaluminum and designed with acontoured shape that functions as aheat sink in high power applications.

Driver Highlights: 3/4” soft dome, compact size, ring neodymium magnet, aluminum faceplate and house, protective grill.

Illuminator D3004/6020-00 4Ω

TECHNICAL DATA:Sensitivity 2.83V/1M 89.2dB Free air resonance Fs 700 HzDC resistance 3.0 ohmV.C. inductance 0.02 mHPower 12dB@Hz 50WEffective cone area 7 cm2

V.C. diameter 26 mmV.C. height 2.1 mmAir gap height 2.5 mm

Lin. & max. excursion ±0.2 / ±1.6 mmForce factor BL Product 1.7 TmMoving mass incl. air 0.35 gOutside diameter 61.9 mmCutout diameter 48.5 mmFlange thickness 5 mmDepth 21.5 mmScrew Circle 53.9 mm

The face plates are die cast inaluminum for a beautiful look withmaximum mechanical stability.

D3004/602000 is optimized tooffer small package sizes that canfit into tight spaces such ascompact cabinets and automotivetrim pieces.

The back chamber is die cast inaluminum and designed with acontoured shape that functions as a heat sink in high power applications.

This tweeter is a good choice for home or autosound systems.Driver Highlights: 1” soft dome, compact size, ring neodymium magnet,

aluminum faceplate and house, protective grill.

Illuminator R2004/6020-00 4Ω

TECHNICAL DATA:Sensitivity 2.83V/1M 86dB Free air resonance Fs 675 HzDC resistance 2.8 ohmV.C. inductance 0.02 mHPower 12dB@Hz 50WEffective cone area 3.8 cm2

V.C. diameter 19 mmV.C. height 1.8 mmAir gap height 2.5 mm

Lin. & max. excursion ±0.4 / ±1.6 mmForce factor BL Product 1.3 TmMoving mass incl. air 0.22 gOutside diameter 55.5 mmCutout diameter 42.1 mmFlange thickness 5 mmDepth 29.3 mmScrew Circle 47.6 mm

The face plates are die cast inaluminum for a beautiful lookwith maximum mechanicalstability. R2004/602000 isoptimized to offer smallpackage sizes that can fit intotight spaces such as compactcabinets and automotive trimpieces.

The back chamber is die castin aluminum and designed witha contoured shape that functions as a heat sink in high power applications.

Driver Highlights: ¾” soft ring dome, compact size, ring neodymiummagnet, aluminum faceplate and house, protective grill, chamber.

Illuminator D3004/6020-10 4Ω

TECHNICAL DATA:Sensitivity 2.83V/1M 89.6dB Free air resonance Fs 425 HzDC resistance 3.0 ohmV.C. inductance 0.02 mHPower 12dB@Hz 50WEffective cone area 7 cm2

V.C. diameter 26 mmV.C. height 2.1 mmAir gap height 2.5 mm

Lin. & max. excursion ±0.2 / ±1.6 mmForce factor BL Product 1.7 TmMoving mass incl. air 0.35 gOutside diameter 61.9 mmCutout diameter 48.5 mmFlange thickness 5 mmDepth 55.4 mmScrew Circle 53.9 mm

The face plates are die cast inaluminum for a beautiful lookwith maximum mechanicalstability. D3004/602010 isoptimized to offer smallpackage sizes that can fit intotight spaces such as compactcabinets and automotive trimpieces.

The back chamber is die castin aluminum and designed witha contoured shape that functions as a heat sink in high power applications.

Driver Highlights: 1” soft dome, compact size, ring neodymium magnet,aluminum faceplate and house, protective grill, large chamber.

Page 4: Scanspeak Full V10

Illuminator R3004/6020-00 4Ω

TECHNICAL DATA:Sensitivity 2.83V/1M 87.4dB Free air resonance Fs 625 HzDC resistance 3.0 ohmV.C. inductance 0.02 mHPower 12dB@Hz 50WEffective cone area 5.6 cm2

V.C. diameter 26 mmV.C. height 2.1 mmAir gap height 2.5 mm

Lin. & max. excursion ±0.2 / ±1.6 mmForce factor BL Product 1.7 TmMoving mass incl. air 0.35 gOutside diameter 61.9 mmCutout diameter 48.5 mmFlange thickness 5 mmDepth 21.5 mmScrew Circle 53.9 mm

The face plates are die cast inaluminum for a beautiful lookwith maximum mechanicalstability. R3004/602000 isoptimized to offer smallpackage sizes that can fit intotight spaces such as compactcabinets and automotive trimpieces.

The back chamber is die castin aluminium and designed with a contoured shape that functions as a heat sink in high power applications.

Driver Highlights: 1” soft ring dome, compact size, ring neodymiummagnet, aluminium faceplate and house, protective grill, chamber.

Illuminator R3004/6020-10 4Ω

TECHNICAL DATA:Sensitivity 2.83V/1M 87.4dB Free air resonance Fs 420 HzDC resistance 3.0 ohmV.C. inductance 0.02 mHPower 12dB@Hz 50WEffective cone area 5.6 cm2

V.C. diameter 26 mmV.C. height 2.1 mmAir gap height 2.5 mm

Lin. & max. excursion ±0.2 / ±1.6 mmForce factor BL Product 1.7 TmMoving mass incl. air 0.35 gOutside diameter 61.9 mmCutout diameter 48.5 mmFlange thickness 5 mmDepth 55.4 mmScrew Circle 53.9 mm

The face plates are die cast inaluminum for a beautiful lookwith maximum mechanicalstability. D3004/602010 isoptimized to offer smallpackage sizes that can fit intotight spaces such as compactcabinets and automotive trimpieces.

The back chamber is die castin aluminium and designed with a contoured shape that functions as a heat sink in high power applications.

Driver Highlights: 1” soft ring dome, compact size, ring neodymiummagnet, aluminium faceplate and house, protective grill, large chamber.

Illuminator D3004/6600-00 4Ω

TECHNICAL DATA:Sensitivity 2.83V/1M 91.5dB Free air resonance Fs 470 HzDC resistance 3.0 ohmV.C. inductance 0.03 mHPower 12dB@Hz [email protected] cone area 7 cm2

V.C. diameter 26 mmV.C. height 2.1 mmAir gap height 2.5 mm

Lin. & max. excursion ±0.2 / ±1.6 mmForce factor BL Product 2.5 TmMoving mass incl. air 0.35 gOutside diameter 104 mmCutout diameter 77 mmFlange thickness 5 mmDepth 23 mmScrew Circle 90 mm

The new D3004/660000 builds onthe experience of the one-inch R29ring radiator, resulting in lowresonance frequency, but furtherprovides the extended dispersioncharacteristics of a ¾-inch dome.Tymphany’s unique AirCirc Magnet System — named for the way itoptimizes air flow within thechamber – rearranges the traditionalmagnet structure from a single magnet to an open magnetic circuitcomprised of six separate neodymium slugs. This, in combination with thechamber, results in the elimination of the reflections and resonances thatcompromise the performance of traditional motors.

Illuminator D3004/6640-00 4Ω

TECHNICAL DATA:Sensitivity 2.83V/1M 91.5dB Free air resonance Fs 500 HzDC resistance 3.0 ohmV.C. inductance 0.03 mHPower 12dB@Hz [email protected] cone area 7 cm2

V.C. diameter 26 mmV.C. height 2.1 mmAir gap height 2.5 mm

Lin. & max. excursion ±0.2 / ±1.6 mmForce factor BL Product 2.3 TmMoving mass incl. air 0.35 gOutside diameter 104 mmCutout diameter 77 mmFlange thickness 5 mmDepth 23 mmScrew Circle 90 mm

This tweeter features a 99% pureBeryllium dome diaphragm. Thelarge roll surround and Berylliumdome diaphragm provide a flatfrequency response to above 40KHzwith outstanding off-axis dispersionand a silky-smooth sound.

AirCir magnet system withneodymium magnets and unique airflow.

Driver Highlights:- 1" Beryllium Diaphragm (99% pure Beryllium)-AirCirc Magnet System with 6 Neodymium Magnet slugs- Die cast rubberpainted aluminium faceplate for maximum mechanical stability andbeautiful look- Protective grill.

Page 5: Scanspeak Full V10

Illuminator D3004/6620-00 4Ω

TECHNICAL DATA:Sensitivity 2.83V/1M 91.5dB Free air resonance Fs 500 HzDC resistance 3.0 ohmV.C. inductance 0.03 mHPower 12dB@Hz [email protected] cone area 7 cm2

V.C. diameter 26 mmV.C. height 2.1 mmAir gap height 2.5 mm

Lin. & max. excursion ±0.2 / ±1.6 mmForce factor BL Product 2.3 TmMoving mass incl. air 0.35 gOutside diameter 104 mmCutout diameter 77 mmFlange thickness 5 mmDepth 23 mmScrew Circle 90 mm

Tymphany’s unique AirCircMagnet System - named for the wayit optimizes air flow within thechamber – rearranges the traditionalmagnet structure from a singlemagnet to an open magnetic circuitcomprised of six separateneodymium slugs. This, incombination with the chamber,results in the elimination of the reflections and resonances that compromisethe performance of traditional motors. The D3004 gives engineers improved control over critical midrange performance, for superb vocal rendition andexcellent imaging at all listening locations. Driver Highlights: 1" soft dome,AirCirc Magnet System, Rubber painted aluminum faceplate, Black

Illuminator D3004/6620-01 4Ω

TECHNICAL DATA:Sensitivity 2.83V/1M 91.5dB Free air resonance Fs 500 HzDC resistance 3.0 ohmV.C. inductance 0.03 mHPower 12dB@Hz [email protected] cone area 7 cm2

V.C. diameter 26 mmV.C. height 2.1 mmAir gap height 2.5 mm

Lin. & max. excursion ±0.2 / ±1.6 mmForce factor BL Product 2.3 TmMoving mass incl. air 0.35 gOutside diameter 104 mmCutout diameter 77 mmFlange thickness 5 mmDepth 23 mmScrew Circle 90 mm

Tymphany’s unique AirCircMagnet System - named for the wayit optimizes air flow within thechamber – rearranges the traditionalmagnet structure from a singlemagnet to an open magnetic circuitcomprised of six separateneodymium slugs. This, incombination with the chamber,results in the elimination of the reflections and resonances that compromisethe performance of traditional motors. The D3004 gives engineers improved control over critical midrange performance, for superb vocal rendition andexcellent imaging at all listening locations. Driver Highlights: 1" soft dome,AirCirc Magnet System, Rubber painted aluminum faceplate, Silver

Illuminator R3004/6620-01 4Ω

TECHNICAL DATA:Sensitivity 2.83V/1M 90.4dB Free air resonance Fs 520 HzDC resistance 3.0 ohmV.C. inductance 0.03 mHPower 12dB@Hz [email protected] cone area 5.6 cm2

V.C. diameter 26 mmV.C. height 2.1 mmAir gap height 2.5 mm

Lin. & max. excursion ±0.2 / ±1.6 mmForce factor BL Product 2.3 TmMoving mass incl. air 0.3 gOutside diameter 104 mmCutout diameter 77 mmFlange thickness 5 mmDepth 23 mmScrew Circle 90 mm

The ring radiator tweeter uses aphase plug. The dome is attached tothe phase plug, so the radiating areais now concentrated around thevoice coil. This offers more controland reduces distortion and loss thatoccur at the center of the dome ondome tweeters.

Tymphany’s unique AirCircMagnet System - named for the way it optimizes air flow within thechamber – rearranges the traditional magnet structure from a single magnetto an open magnetic circuit comprised of six separate neodymium slugs.This, in combination with the chamber, results in the elimination of thereflections and resonances that compromise the performance. Silver

Illuminator R3004/6620-00 4Ω

TECHNICAL DATA:Sensitivity 2.83V/1M 90.4dB Free air resonance Fs 520 HzDC resistance 3.0 ohmV.C. inductance 0.03 mHPower 12dB@Hz [email protected] cone area 5.6 cm2

V.C. diameter 26 mmV.C. height 2.1 mmAir gap height 2.5 mm

Lin. & max. excursion ±0.2 / ±1.6 mmForce factor BL Product 2.3 TmMoving mass incl. air 0.3 gOutside diameter 104 mmCutout diameter 77 mmFlange thickness 5 mmDepth 23 mmScrew Circle 90 mm

The ring radiator tweeter uses aphase plug. The dome is attached tothe phase plug, so the radiating areais now concentrated around thevoice coil. This offers more controland reduces distortion and loss thatoccur at the center of the dome ondome tweeters.

Tymphany’s unique AirCircMagnet System - named for the way it optimizes air flow within thechamber – rearranges the traditional magnet structure from a single magnetto an open magnetic circuit comprised of six separate neodymium slugs.This, in combination with the chamber, results in the elimination of thereflections and resonances that compromise the performance. Black

Page 6: Scanspeak Full V10

Illuminator 4.5" 12MU/8731T-00 8ΩThe Illuminator midrange is based on

compact underhung motor systems withlarge neodymium ring magnets. Thepatent pending motor offers a very longlinear excursion together with a veryhigh force factor. The top plate isshaped to “guide” the backside airflowaround the motor and with the very open cast aluminum chassis design the driveris virtually free from compression. Thecone and dust cap is made in one piecefull cone technology.

Frame diameter 120mm, cutout holesize 101mm, depth 66mm.

Illuminator 4.5" 12MU/4731T-00 4Ω

TECHNICAL DATA:Sensitivity 2.83V/1M 90 dB Free air resonance Fs 64 HzDC resistance 3.1 ohmV.C. inductance 0.11 mHPower 12dB@Hz 80WEffective cone area 58 cm2

V.C. diameter 32 mmV.C. height 6.0 mmAir gap height 13.0 mm

Lin. & max. excursion ±3.5 & ±10mmForce factor BL Product 5.14 TmMoving mass incl. air 5.4 gNet weight 0.8 kgVas 5.4 ltrsQms 3.64Qes 0.26Qts 0.24

The Illuminator midrange is based oncompact underhung motor systems withlarge neodymium ring magnets. Thepatent pending motor offers a very longlinear excursion together with a veryhigh force factor. The top plate isshaped to “guide” the backside airflowaround the motor and with the very open cast aluminum chassis design the driveris virtually free from compression. Thecone and dust cap is made in one piecefull cone technology.

Frame diameter 120mm, cutout holesize 101mm, depth 66mm.

TECHNICAL DATA:Sensitivity 2.83V/1M 87.2 dB Free air resonance Fs 66 HzDC resistance 5.9 ohmV.C. inductance 0.13 mHPower 12dB@Hz 80WEffective cone area 58 cm2

V.C. diameter 32 mmV.C. height 6.2 mmAir gap height 13.0 mm

Lin. & max. excursion ±3.4 & ±11mmForce factor BL Product 6.1 TmMoving mass incl. air 4.7 gNet weight 0.8 kgVas 5.9 ltrsQms 3.63Qes 0.31Qts 0.29

Illuminator 5.25" 15WU/4741T-00 4ΩThe Illuminator woofers are based on

compact under-hung motor systemswith large neodymium ring magnets.The patent pending motor offers a verylong linear excursion together with avery high force factor. The top plate isshaped to “guide” the backside airflowaround the motor and with the very open cast aluminum chassis design the driveris virtually free from compression.

F3 of 60Hz in 0.25 cubic foot vented .Frame diameter 149mm, cutout hole

diameter 123mm, depth 91mm.

TECHNICAL DATA:Sensitivity 2.83V/1M 85.9dB Free air resonance Fs 34 HzDC resistance 3.2 ohmV.C. inductance 0.5 mHPower 80WEffective cone area 92 cm2

V.C. diameter 42 mmVC height 8 mmAir gap 20 mm

Lin. & max. excursion ±9 / ±12 mmForce factor BL Product 6 TmMoving mass incl. air 13 gNet weight 1.6 kgVas 20.1 ltrsQms 3.47Qes 0.25Qts 0.23

Illuminator 5.25" 15WU/8741T-00 8ΩThe Illuminator woofers are based on

compact under-hung motor systemswith large neodymium ring magnets.The patent pending motor offers a verylong linear excursion together with avery high force factor. The top plate isshaped to “guide” the backside airflowaround the motor and with the very open cast aluminum chassis design the driveris virtually free from compression.

F3 of 58Hz in 0.25 cubic foot vented .Frame diameter 149mm, cutout hole

diameter 123mm, depth 91mm.

TECHNICAL DATA:Sensitivity 2.83V/1M 83.4dB Free air resonance Fs 35 HzDC resistance 5.9 ohmV.C. inductance 0.41 mHPower 80WEffective cone area 92 cm2

V.C. diameter 42 mmVC height 8 mmAir gap 20 mm

Lin. & max. excursion ±9 / ±12 mmForce factor BL Product 6 TmMoving mass incl. air 12.3 gNet weight 1.6 kgVas 20.1 ltrsQms 3.37Qes 0.28Qts 0.26

Page 7: Scanspeak Full V10

Illuminator 6.5" 18WU/4741T-00 4ΩThe Illuminator woofers are based on

compact under-hung motor systemswith large neodymium ring magnets.The patent pending motor offers a verylong linear excursion together with avery high force factor. The top plate isshaped to “guide” the backside airflowaround the motor and with the very open cast aluminum chassis design the driveris virtually free from compression.

F3 of 5Hz in 0.5 cubic foot vented .Frame diameter 184mm, cutout hole

diameter 160mm, depth 98mm.

TECHNICAL DATA:Sensitivity 2.83V/1M 87.2dB Free air resonance Fs 30 HzDC resistance 3.2 ohmV.C. inductance 0.5 mHPower 80WEffective cone area 154 cm2

V.C. diameter 42 mmVC height 8 mmAir gap 20 mm

Lin. & max. excursion ±9 / ±16 mmForce factor BL Product 6 TmMoving mass incl. air 18.9 gNet weight 1.7 kgVas 49.4 ltrsQms 3.56Qes 0.32Qts 0.29

Illuminator 6.5" 18WU/8741T-00 8ΩThe Illuminator woofers are based on

compact under-hung motor systemswith large neodymium ring magnets.The patent pending motor offers a verylong linear excursion together with avery high force factor. The top plate isshaped to “guide” the backside airflowaround the motor and with the very open cast aluminum chassis design the driveris virtually free from compression.

F3 of 50Hz in 0.6 cubic foot vented .Frame diameter 184mm, cutout hole

diameter 160mm, depth 98mm.

TECHNICAL DATA:Sensitivity 2.83V/1M 85.4dB Free air resonance Fs 31 HzDC resistance 5.9 ohmV.C. inductance 0.41 mHPower 80WEffective cone area 154 cm2

V.C. diameter 42 mmVC height 8 mmAir gap 20 mm

Lin. & max. excursion ±9 / ±16 mmForce factor BL Product 7.5 TmMoving mass incl. air 18 gNet weight 1.7 kgVas 48.6 ltrsQms 3.51Qes 0.37Qts 0.33

Illuminator 6.5" 18WU/4747T-00 4ΩThe Illuminator woofers are based on

compact under-hung motor systemswith large neodymium ring magnets.The patent pending motor offers a verylong linear excursion together with avery high force factor. The top plate isshaped to “guide” the backside airflowaround the motor and with the very open cast aluminum chassis design the driveris virtually free from compression.

Black anodized aluminum cone.Frame diameter 184mm, cutout hole

diameter 160mm, depth 98mm.

TECHNICAL DATA:Sensitivity 2.83V/1M 88.1dB Free air resonance Fs 32 HzDC resistance 3.2 ohmV.C. inductance 0.39 mHPower 80WEffective cone area 154 cm2

V.C. diameter 42 mmVC height 8 mmAir gap 20 mm

Lin. & max. excursion ±9 / ±16 mmForce factor BL Product 6 TmMoving mass incl. air 17 gNet weight 1.7 kgVas 48.7 ltrsQms 3.42Qes 0.30Qts 0.28

Illuminator 6.5" 18WU/8747T-00 8ΩThe Illuminator woofers are based on

compact under-hung motor systemswith large neodymium ring magnets.The patent pending motor offers a verylong linear excursion together with avery high force factor. The top plate isshaped to “guide” the backside airflowaround the motor and with the very open cast aluminum chassis design the driveris virtually free from compression.

Black anodized aluminum cone.Frame diameter 184mm, cutout hole

diameter 160mm, depth 98mm.

TECHNICAL DATA:Sensitivity 2.83V/1M 85.5dB Free air resonance Fs 33 HzDC resistance 5.9 ohmV.C. inductance 0.41 mHPower 80WEffective cone area 154 cm2

V.C. diameter 42 mmVC height 8 mmAir gap 20 mm

Lin. & max. excursion ±9 / ±16 mmForce factor BL Product 7.5 TmMoving mass incl. air 16 gNet weight 1.7 kgVas 49.2 ltrsQms 3.31Qes 0.35Qts 0.31

Page 8: Scanspeak Full V10

R2904/7000 4Ω

TECHNICAL DATA:Sensitivity 2.83V/1M 94.5dB Free air resonance Fs 520 HzDC resistance 3.0 ohmV.C. inductance 0.01 mHPower 12dB@Hz [email protected]

Effective cone area 5.6 cm2

V.C. diameter 28 mmLin. & max. excursion ±0.2 / ±1.6mmForce factor BL Product 2.8 TmMoving mass incl. air 0.3 gNet weight 0.42 kg

The R2904/7000 tweeter is the newflagship tweeter in the Scan-speak line. This tweeter incorporates manyinnovative design concepts.

The first notable difference is the useof a phase plug. The dome is attached to the phase plug, so the radiating area isnow concentrated around the voice coil. This offers more control and reduces distortion and loss that occur at the center of the dome on dome tweeters. The phase plug also acts as a wave guide, reducinghigh frequency cancellations. A specially designedventing system uses a needle to cut down on turbulence in the air cavity. Better dynamics are achieved by notusing ferrofluid, voice coil cooling is performed by theventing system and conduction through copper rings. The new SD-2 neodymium magnet system improvestransient response.

D2904/7100 4Ω

TECHNICAL DATA:Sensitivity 2.83V/1M 94.4dB Free air resonance Fs 520 HzDC resistance 3.0 ohmV.C. inductance 0.01 mHPower 12dB@Hz [email protected]

Effective cone area 7 cm2

V.C. diameter 28 mmLin. & max. excursion ±0.2 / ±1.6mmForce factor BL Product 2.8 TmMoving mass incl. air 0.35 gNet weight 0.42 kg

The D2904/7100 tweeter is a 1" softdome with wide surround, using thesame chambering as the Ring Radiator.

The carefully designed dome andsurround result in a linear response andan exceptionally good off axis response. Note the smooth roll off on the low end,making this tweeter a good choice forsimple slopes

A specially designed venting systemuses a needle to cut down on turbulencein the air cavity. Better dynamics areachieved by not using ferrofluid, voicecoil cooling is performed by the ventingsystem and conduction through copperrings. The new SD-2 neodymiummagnet system improves transientresponse.

The D2905/9900 is our state of the arttweeter. This “revelation” is a 1" textiledome tweeter that will reach newborders within high-end loudspeakerdrive units. The new magnet systemwith SD caps and rings that eliminate the electrical phase shift. The new chamberdesign reduces air noises andcompression. The 130mm machinedaluminum front plate has morecontrolled directivity (down to 2Khz).The textile dome is hand coated and aspecial device is placed behind it toreduce dynamic compression.

TECHNICAL DATA:Sensitivity 2.83V/1M 91dBFree air resonance Fs 500 HzDC resistance 4.7 ΩV.C. inductance 0.01 mHPower [email protected] cone area 8.5 cm2

V.C. diameter 28 mm

V.C. height 3.3mmAir gap height 2.5mm

Lin. & max. excursion ±0.4/ ±1.5 mmAir gap flux density -BL 3.5 TmMoving mass incl. air 0.45 gNet weight 0.8 kg

D2905/9900Revelator Dome Tweeter

The 12M/4631G is a Revelator driver using the “slit cone” technology. Someof the slits are used to control coneresonance and the other set of slits addrigidity. This speaker also has the newdynamic linear suspension for lowercompression and higher linearity. Every facet of this driver is designed to reduceresonance in all structures. Aneodymium magnet has been chosen toreduce the depth, yet increase themagnetic energy.

12M/4631G 4ΩRevelator 4.5” Midrange

TECHNICAL DATA:Sensitivity 2.83V/1M 89 dB Free air resonance Fs 75 HzDC resistance 3.2 ohmV.C. inductance 0.22 mHPower 12dB@Hz 40WEffective cone area 49 cm2

V.C. diameter 38 mmV.C. height -Air gap height -

Lin. & max. excursion ±3 & ±7mmForce factor BL Product 5.3 TmMoving mass incl. air 6.5 gNet weight 0.6 kgVas 2.4 ltrsQms 5.57Qes 0.35Qts 0.33

Page 9: Scanspeak Full V10

15M/4531K 4ΩThe 15M/4531K is a 5 ½” Revelator

midrange. It features a slit-papernon-resonant cone and dust capstructure, dynamic linear suspension,SD-1 magnet system, “Grasshopper”cast chassis with maximized air flow,glass fiber voice coil former andresonance terminating mounting system. The 15M/4531K is intended for use as amidrange, with a usable frequency range between 100Hz and 6kHz. As you cansee from the response curve, this speaker has a lot of energy in the upperfrequency range.

TECHNICAL DATA:Sensitivity 2.83V/1M 90 dB Free air resonance Fs 35 HzDC resistance 3.5 ohmV.C. inductance 0.17 mHPower 12dB@Hz 60WEffective cone area 95 cm2

V.C. diameter 38 mmV.C. height 11 mmAir gap height 5 mm

Lin. & max. excursion ±3 & ±8mmForce factor BL Product 6.0 TmMoving mass incl. air 11 gNet weight 1.6 kgVas 24 ltrsQms 4.8Qes 0.24Qts 0.23

15W/4531G-00 4Ω

TECHNICAL DATA:Sensitivity 2.83V/1M 87 dB Free air resonance Fs 40 HzDC resistance 3.4 ohmV.C. inductance 0.25 mHPower 12dB@Hz 60WEffective cone area 95 cm2

V.C. diameter 38 mmV.C. height 17.5 mmAir gap height 5 mm

Lin. & max. excursion ±6.5 & ±9mmForce factor BL Product 5.7 TmMoving mass incl. air 13 gNet weight 1.6 kgVas 15.8 ltrsQms 4.6Qes 0.34Qts 0.32

The 15W/4531G-01 is a 5 ½”Revelator mid/woofer. It features aslit-paper uncoated non-resonant coneand dust cap structure, dynamic linearsuspension, SD-1 magnet system,“Grasshopper” cast chassis withmaximized air flow, glass fiber voicecoil former and resonance terminatingmounting system. The 15W/4531Gprovides a more extended frequencyresponse than it’s brothers, but stillfantastic bass down to the mid 50’s in avented enclosure. This version is onlyavailable in 4 ohm.

15W/8530K-00/01

TECHNICAL DATA:Sensitivity 2.83V/1M 85.5/84.5dB Free air resonance Fs 30/32 HzDC resistance 5.8 ohmV.C. inductance 0.35 mHPower 12dB@Hz 60WEffective cone area 95 cm2

V.C. diameter 38 mmV.C. height 18 mmAir gap height 5 mm

Lin. & max. excursion ±6.5 & ±9mmForce factor BL Product 7/5.9 TmMoving mass incl. air 13 gNet weight 1.7/1.2 kgVas 27.4/24 ltrsQms 4.9/5.23Qes 0.29/0.44Qts 0.27/0.41

The 15W/8530K-01 is a 5 ½”Revelator mid/woofer. It features anon-resonant cone and dust capstructure, dynamic linear suspension,SD-1 magnet system, “Grasshopper”cast chassis with maximized air flow and resonance terminating mounting system. Less resonance in all structures, lowercompression and higher linearity, fastertermination of excess energy and highersound pressure capability make the 15Whave more musical and dynamiccapability than any other 5 ½” we knowof. Wonderful bass in a small box!

18W/4531G 4Ω

TECHNICAL DATA:Sensitivity 2.83V/1M 90dB Free air resonance Fs 33 HzDC resistance 3.4 ohmV.C. inductance 0.3 mHPower 70WEffective cone area 150 cm2

V.C. diameter 38 mmVC height 17.5 mmAir gap height 5

Lin. & max. excursion ±6.5 / ±11 mmForce factor BL Product 5.7 TmMoving mass incl. air 17.5 gNet weight 1.7 kgVas 41.9 ltrsQms 5.2Qes 0.38Qts 0.35

The 18W/4531G-00 is a 7” Revelatormid/woofer. It features a non-resonantcone and dust cap structure, dynamiclinear suspension, SD-1 magnet system,“Grasshopper” cast chassis withmaximized air flow and resonanceterminating mounting system. Lessresonance in all structures, lowercompression and higher linearity, fastertermination of excess energy and highersound pressure capability. The18W/4531G should have an F3 of about65Hz sealed and 40Hz vented. This is apopular driver for automotiveapplications.

Page 10: Scanspeak Full V10

18W/8531G 8ΩThe 18W/8531G-00 is a 7” Revelator

mid/woofer. It features a non-resonantcone and dust cap structure, dynamiclinear suspension, SD-1 magnet system,“Grasshopper” cast chassis withmaximized air flow and resonanceterminating mounting system. Lessresonance in all structures, lowercompression and higher linearity, fastertermination of excess energy and highersound pressure capability. The18W/8531G should have an F3 of about50Hz sealed and 35Hz vented.

TECHNICAL DATA:Sensitivity 2.83V/1M 87dB Free air resonance Fs 28 HzDC resistance 5.8 ohmV.C. inductance 0.35 mHPower 60WEffective cone area 150 cm2

V.C. diameter 38 mmVC height 18 mmAir gap 5 mm

Lin. & max. excursion ±6.5 / ±11 mmForce factor BL Product 6.8 TmMoving mass incl. air 17.5 gNet weight 1.7 kgVas 58.2 ltrsQms 5.1Qes 0.39Qts 0.36

22W/4851T 4ΩThe 22W/4851T is a new addition to

the Revelator line. This robust 8"woofer was designed to provide deepand accurate bass in a small enclosure. This woofer features a 2" voice coil ona titanium former, a low loss linearsuspension and symmetric drive motor. The deep set hard paper cone isattached to the frame with a minimalreflection rubber surround. The 9mmX-max insures good linear travel.

We suggest a 1.2 cubic foot enclosure with a 2"Ø vent by 8" long for and F3of 50Hz.

TECHNICAL DATA:Sensitivity 2.83V/1M 89 dB Free air resonance Fs 21 HzDC resistance 3.7 ohmV.C. inductance 0.3 mHPower 170 WEffective cone area 220 cm2

V.C. diameter 50 mmVC height 24 mmAir gap 6 mm

Lin. & max. excursion ±9 / ±14 mmForce factor BL Product 8.2 TmMoving mass incl. air 32.5 gNet weight 3.6 kgVas 126 ltrsQms 5.2Qes 0.23Qts 0.22

TECHNICAL DATA:Sensitivity 2.83V/1M 88 dB Free air resonance Fs 21 HzDC resistance 6.2 ohmV.C. inductance 0.35 mHPower 170 WEffective cone area 220 cm2

V.C. diameter 50 mmVC height 24 mmAir gap 6 mm

Lin. & max. excursion ±9 / ±14 mmForce factor BL Product 9.9 TmMoving mass incl. air 31 gNet weight 3.6 kgVas 126 ltrsQms 5.1Qes 0.26Qts 0.25

The 22W/8851T is a new addition tothe Revelator line. This robust 8"woofer was designed to provide deepand accurate bass in a small enclosure. This woofer features a 2" voice coil ona titanium former, a low loss linearsuspension and symmetric drive motor. The deep set hard paper cone isattached to the frame with a minimalreflection rubber surround. The 9mmX-max insures good linear travel.

We suggest a 1.2 cubic foot enclosure with a 2.5"Ø vent by 8" long for and F3 of 38Hz.

22W/8851T 8Ω 22W/8857T 8The 22W/885TT is a new addition to

the Revelator line. This robust 8"woofer was designed to provide deepand accurate bass in a small enclosure. This woofer features a 2" voice coil ona titanium former, a low loss linearsuspension and symmetric drive motor. The deep set black aluminum cone isattached to the frame with a minimalreflection rubber surround. The 9mmX-max insures good linear travel.

We suggest a 1.2 cubic foot enclosure with a 2" Ø vent by 8" long for and F3of 38Hz.

TECHNICAL DATA:Sensitivity 2.83V/1M 86 dB Free air resonance Fs 23 HzDC resistance 6.2 ohmV.C. inductance 0.35 mHPower 170 WEffective cone area 220 cm2

V.C. diameter 50 mmVC height 24 mmAir gap 6 mm

Lin. & max. excursion ±9 / ±14 mmForce factor BL Product 10.1 TmMoving mass incl. air 37 gNet weight 3.6 kgVas 87.7 ltrsQms 4.9Qes 0.32Qts 0.30

Page 11: Scanspeak Full V10

The 26W/8861T is a new addition tothe Revelator line. This robust 10"woofer was designed to provide deepand accurate bass in a small enclosure. This woofer features a 2" voice coil ona titanium former, a low loss linearsuspension and symmetric drive motor. The deep set hard paper cone isattached to the frame with a minimalreflection rubber surround. The 9mmX-max insures good linear travel.

We suggest a 2.75 cubic footenclosure with a 3"Ø vent by 9.5" longfor and F3 of 30Hz.

26W/8861T 8Ω

TECHNICAL DATA:Sensitivity 2.83V/1M 88.5 dB Free air resonance Fs 19 HzDC resistance 6.2 ohmV.C. inductance 0.35 mHPower 170 WEffective cone area 320 cm2

V.C. diameter 50 mmVC height 24 mmAir gap 6 mm

Lin. & max. excursion ±9 / ±14 mmForce factor BL Product 9.9 TmMoving mass incl. air 43.5 gNet weight 3.7 kgVas 234 ltrsQms 5.2Qes 0.33Qts 0.31

The 26W/4867T a new blackAluminum cone woofer. Aluminum isa good material for subwoofer cones,very stiff and light. These cones reduce distortion and also help cool the voicecoil, by conducting heat away from thecoil. This woofer has a low losssuspension for increased bass responseand the SD-1 motor system for lessintermodulation distortion. Very rigidcast frame, large windows.

We recommend a 2.5 cubic footenclosure with a 3" diameter vent by10" long, the F3 would be about 29Hz.

26W/4867T 4Ω

TECHNICAL DATA:Sensitivity 2.83V/1M 89 dB Free air resonance Fs 18 HzDC resistance 3.7 ohmV.C. inductance 0.25 mHPower 170 WEffective cone area 320 cm2

V.C. diameter 50 mmVC height 24 mmAir gap 6 mm

Lin. & max. excursion ±9 / ±14 mmForce factor BL Product 8.3 TmMoving mass incl. air 51 gNet weight 3.7 kgVas 223 ltrsQms 5.8Qes 0.31Qts 0.29

The 26W/8867T a new blackAluminum cone woofer. Aluminum isa good material for subwoofer cones,very stiff and light. These cones reduce distortion and also help cool the voicecoil, by conducting heat away from thecoil. This woofer has a low losssuspension for increased bass responseand the SD-1 motor system for lessintermodulation distortion. Very rigidcast frame, large windows.

We recommend a 2.3 cubic footenclosure with a 3" diameter vent by11" long, the F3 would be about 29Hz.

26W/8867T 8Ω

TECHNICAL DATA:Sensitivity 2.83V/1M 87 dB Free air resonance Fs 19 HzDC resistance 5.8 ohmV.C. inductance 0.4 mHPower 170 WEffective cone area 320 cm2

V.C. diameter 50 mmVC height 24 mmAir gap 6 mm

Lin. & max. excursion ±9 / ±14 mmForce factor BL Product 11.2 TmMoving mass incl. air 57 gNet weight 3.7 kgVas 179 ltrsQms 4.5Qes 0.31Qts 0.29

23W/4557T 4ΩThe 23W/4557T is a very high end

subwoofer, designed to be used with apassive radiator in a small enclosure. This sub has a very rigid aluminum cone,low loss rubber surround and cast frame. The passive radiator is similar, but with aweight attached to the bass of the cone. The 23W/4557T is using the SD-1 motorsystem. There are gold plated bindingposts and the woofer is covered by adecorative rubber cap.

Frequency response with the passive isdown to 25Hz. One cubic foot sealed has an F3 of 33Hz. Also in black cone.

TECHNICAL DATA:Sensitivity 2.83V/1M 82 dB Free air resonance Fs 21 HzDC resistance 3.45 ohmV.C. inductance 0.45 mHPower 225 WEffective cone area 232 cm2

V.C. diameter 50 mmVC height 34 mmAir gap 8 mm

Lin. & max. excursion ±13 / ±20 mmForce factor BL Product 9.3 TmMoving mass incl. air 101 gNet weight 4.6 kgVas 45 ltrsQms 4.8Qes 0.52Qts 0.47Black cone part# 23W/4557T-02

Page 12: Scanspeak Full V10

This is the passive radiator intendedfor use with the 23W/4557T activewoofer. We recommend putting bothin a 1.0 cubic foot enclosure. Thisshould yield a bass response down to25Hz. The woofer should still be linear at 180 watts and have an output ofabout 104dB.

The curve below is a simulation ofthe woofer and passive radiator in a 1.0cubic foot box. This was done in BassBox Pro by Harris Technologies.

Also in black cone.

23W/0-00 Passive

TECHNICAL DATA:Sensitivity 2.83V/1M - dB Free air resonance Fs 11 HzDC resistance - ohmV.C. inductance - mHPower - WEffective cone area 232 cm2

V.C. diameter - mmVC height -Air gap -

max. excursion ±20 mmForce factor BL Product - TmMoving mass incl. air 400 gNet weight 1.2 kgVas 43.3 ltrsQms 11.5Qes -Qts -Black cone part# 23W/0-00-02

D2008/8512

TECHNICAL DATA:Sensitivity 2.83V/1M 88dB Free air resonance Fs 800 HzDC resistance 5.7 ohmV.C. inductance 0.08 mHPower 12dB@Hz 150W@4KEffective cone area 3.8 cm2

V.C. diameter 19 mmV.C. height 3.1 mmAir gap height 2 mm

Lin. & max. excursion ±0.7 / ±1.2 mmForce factor BL Product 2.4 TmMoving mass incl. air 0.25 gNet weight 0.4 kgVas -Qms 1.26Qes 1.24Qts 0.63

Similar to the D2008, but with severalimprovements, a foam impregnated front face plate and a lower resonance.Double chambered 3/4" damped textiledome tweeter with the same diaphragmand voice coil as the D2008.

The lower resonance of this driver will allow it to be crossed over lower thanmost other 3/4" dome tweeters, yetretain the low distortion and clarity of a3/4" dome. We recommend a steeperx-over slope be used when the x-overpoint is below 3KHz.

D2010/8513

TECHNICAL DATA:Sensitivity 2.83V/1M 88dB Free air resonance Fs 800 HzDC resistance 5.7 ohmV.C. inductance 0.08 mHPower 12dB@Hz 150W@4KEffective cone area 3.8 cm2

V.C. diameter 19 mmV.C. height 3.1 mmAir gap height 2 mm

Lin. & max. excursion ±0.7 / ±1.2 mmForce factor BL Product 2.4 TmMoving mass incl. air 0.25 gNet weight 0.4 kgVas -Qms 1.26Qes 1.24Qts 0.63

Similar to the D2008, but with severalimprovements, a foam impregnated front face plate and a lower resonance.Double chambered 3/4" damped textiledome tweeter with the same diaphragmand voice coil as the D2008.

The lower resonance of this driver will allow it to be crossed over lower thanmost other 3/4" dome tweeters, yetretain the low distortion and clarity of a3/4" dome. We recommend a steeperx-over slope be used when the x-overpoint is below 3KHz.

D2905/93001" Dome Tweeter

TECHNICAL DATA:Sensitivity 2.83V/1M 90dB Free air resonance Fs 650 HzDC resistance 4.7 ohmV.C. inductance 0.08 mHPower 12dB@Hz [email protected] cone area 8.5 cm2

V.C. diameter 28 mmV.C. height 3.3 mmAir gap height 2.5 mm

Lin. & max. excursion ±0.4 / ±1.5 mmForce factor BL Product 3.5 TmMoving mass incl. air 0.45 gNet weight 0.7 kgVas -Qms 0.94Qes 0.72Qts 0.41

The D2905/9300 is a 1” textile dometweeter with a very flat frequencyresponse and low distortion. TheD2905/9300 achieves a lower resonanceand increased clarity by using severalcoatings of damping material on thedome and chambering behind the dome.Both these damping factors and the useof a light magnetic fluid, reduce theresonances as much as possible, whilereducing compression affects. thistweeters linear response and opennessmake it a good choice for any system.

Page 13: Scanspeak Full V10

D2905/95001" Dome Tweeter

TECHNICAL DATA:Sensitivity 2.83V/1M 90dB Free air resonance Fs 550 HzDC resistance 4.7 ohmV.C. inductance 0.07 mHPower 12dB@Hz [email protected] cone area 8.5 cm2

V.C. diameter 28 mmV.C. height 3.3 mmAir gap height 2.5 mm

Lin. & max. excursion ±0.4 / ±1.5 mmForce factor BL Product 3.5 TmMoving mass incl. air 0.45 gNet weight 0.7 kgVas -Qms 1.04Qes 0.60Qts 0.38

The D2905/9500 is similar to theD2905/9300, but with non-resonantchamber. The optimized pole piecegeometry reduces flow resistance and the anti-resonator-plug in the rear chambereliminates turbulence. A light ferrofluidis used in the air gap to ensure optimallinear mechanical behavior and minimalmicro-dynamic non-linearity. Thistweeter has a smooth transparent soundand very low levels of distortion. Aperfect choice for any high end system.

The D2905/9700 uses the same handcoated dome and voice coil of theD2905/9500, but uses the motor systemof the Revelator. The Symmetric Drivetechnology eliminates almost allelectrical phase shift. The carefullymachined top plate minimize air noiseand compression. Copper caps act asheat conductors. High power handling is achieved without ferrofluid andimproves micro-dynamic linearity. Thetweeter has excellent dynamic anddetailing capability. TECHNICAL DATA:Sensitivity 2.83V/1M 89.5dBFree air resonance Fs 500 HzDC resistance 4.7 ΩV.C. inductance 0.01 mHPower [email protected] cone area 8.5 cm2

V.C. diameter 28 mmV.C. height 3.3 mmAir gap height 2.5 mm

Lin. & max. excursion ±0.4/ ±1.5 mmBL 3.5 TmMoving mass incl. air 0.45 gNet weight 0.7 kgVas - Qms 3.45Qes 0.54Qts 0.47

D2905/97001” Dome Tweeter

D2904/9800 4Ω

TECHNICAL DATA:Sensitivity 2.83V/1M 88dB Free air resonance Fs 500 HzDC resistance 3.5 ohmV.C. inductance 0.01 mHPower 12dB@Hz [email protected] cone area 8.5 cm2

V.C. diameter 28 mmV.C. height 2.5 mmAir gap height 2.5 mm

Lin. & max. excursion ±0.1 / ±1.5 mmForce factor BL Product 2.8 TmMoving mass incl. air 0.50 gNet weight 0.7 kgVas -Qms 3.09Qes 0.84Qts 0.66

The D2904/9800 is a high-end 1”aluminum dome tweeter. The magnetsystem uses the Symmetric Drivetechnology that almost eliminateselectrical phase shift. The speciallydesigned chamber reduces air noise andcompression. The geometry of thedome causes the “break-up” to appearbeyond the audible range. A speciallydesigned diffusor is used to equalize theresponse in the upper octave. Thetweeter has a very clear and open sound.

D3806/82001.5" Dome Mid/Tweeter

TECHNICAL DATA:Sensitivity 2.83V/1M 89dB Free air resonance Fs 450 HzDC resistance 5.7 ohmV.C. inductance 0.04 mHPower 12dB@Hz [email protected] cone area 14 cm2

V.C. diameter 38 mmV.C. height 3.2 mmAir gap height 2.5 mm

Lin. & max. excursion ±0.4 / ±1 mmForce factor BL Product 3.8 TmMoving mass incl. air 0.9 gNet weight 1.1 kgVas -Qms 0.93Qes 1.00Qts 0.48

The D3806/8200 is a 1.5” textile dome mid/tweeter. The large dome allows fora lower crossover point. Large dometypically have better transient responsetoo. This tweeter is a good choice foruse in a system where a lower crossoverpoint is required, or where an upper midis needed.

This tweeter has the SD motor systemfor reduced distortion and a tuned rearchamber. Flange is 125mm in diameter,91mm cut out diameter and 47mmdepth.

Page 14: Scanspeak Full V10

18W/85357" Carbon/Paper Woofer

TECHNICAL DATA:Sensitivity 2.83V/1M 86.5dB Free air resonance Fs 26 HzDC resistance 5.8 ohmV.C. inductance 0.3 mHPower 70WEffective cone area 145 cm2

V.C. diameter 38 mmV.C. height 15 mmAir gap height 5 mm

Lin. & max. excursion ±5 / ±10 mmForce factor BL Product 5.7 TmMoving mass incl. air 15.5 gNet weight 2.5 kgVas 71.2 litersQms 2.50Qes 0.45Qts 0.38

The 18W/8535 woofer features theSD-1 magnet system which almosteliminates modulation and dynamicdistortion and reduce clipping when thedrivers is taken beyond linear excursion. The carbon fiber filled paper cone isimpregnated and coated to dampresonance. The low loss rubbersurround combines dynamic linearitywith low coloration. The smallermagnet increases the Qts making thisdriver a good choice for a sealedenclosure.

18W/85427" Paper Cone Woofer

TECHNICAL DATA:Sensitivity 2.83V/1M 89dB Free air resonance Fs 30 HzDC resistance 5.5 ohmV.C. inductance 0.2 mHPower 70WEffective cone area 135 cm2

V.C. diameter 42 mmV.C. height 19 mmAir gap height 6 mm

Lin. & max. excursion ±6.5 / ±10mmForce factor BL Product 7.8 TmMoving mass incl. air 15 gNet weight 2.3 kgVas 47.9 litersQms 1.7Qes 0.26Qts 0.23

The 18W/8542 is a classic paper conewoofer with foam surround. The backcoated paper cone delivers smooth andwarm sound reproduction. The speakeris intended for high end 2-way systemsin bass reflex enclosures. This wooferhas the large Symetric Drive (SD)magnet system for reduced distortion. The surround is made of double coatedfoam material with long term stability. A coating is used to dampen unwantedresonances where the surround isattached to the cone.

18W/85457" Carbon fibre Paper Woofer

TECHNICAL DATA:Sensitivity 2.83V/1M 88dB Free air resonance Fs 28 HzDC resistance 5.5 ohmV.C. inductance 0.4 mHPower 100WEffective cone area 145 cm2

V.C. diameter 42 mmV.C. height 19 mmAir gap height 6 mm

Lin. & max. excursion ±6.5 / ±10mmForce factor BL Product 8.0 TmMoving mass incl. air 20 gNet weight 2.3 kgVas 47.6 litersQms 2.30Qes 0.30Qts 0.27

This 7" features the heavily dampedand carbon fibre impregnated paper cone that dampens resonances normallyassociated with stiff cones. The magnetsystem is the new SD-1 system whicheliminates modulation and dynamicdistortion, as well as clipping distortioncreated as it exceeds its maximum linearexcursion. These designs all togethermake a drive unit with a very “open”sound with excellent detailing combinedwith low coloration and very preciseimaging. Cast frame, rubber surround.

18W/8545K7" Carbon fibre Paper Woofer

TECHNICAL DATA:Sensitivity 2.83V/1M 87.5dB Free air resonance Fs 28 HzDC resistance 5.5 ohmV.C. inductance 0.4 mHPower 100WEffective cone area 145 cm2

V.C. diameter 42 mmV.C. height 19 mmAir gap height 6 mm

Lin. & max. excursion ±6.5 / ±10mmForce factor BL Product 8.2 TmMoving mass incl. air 20.5 gNet weight 2.4 kgVas 46.4 litersQms 5.20Qes 0.30Qts 0.28

This 7" features the heavily dampedand carbon fibre impregnated paper conethat dampens resonances normallyassociated with stiff cones. The magnetsystem is the new SD-1 system whicheliminates modulation and dynamicdistortion, as well as clipping distortioncreated as it exceeds its maximum linearexcursion. This driver uses a fiberglassvoice coil former.

Try it in a 1/2 cubic foot box with a1.5" diameter vent by 5.2" long, f3 48Hz.

Page 15: Scanspeak Full V10

D2606/9200 6Ω

TECHNICAL DATA:Sensitivity 2.83V/1M 91.4dB Free air resonance Fs 1100 HzDC resistance 4.6 ohmV.C. inductance 0.04 mHPower 12dB@Hz [email protected] cone area 7.1 cm2

V.C. diameter 26 mmV.C. height 1.6 mmAir gap height 2.5 mm

Lin. & max. excursion ±0.2 / ±1.6 mmAir gap flux density -Force factor BL Product 2.7 TmMoving mass incl. air 0.3 gOutside diameter 104 mmCutout diameter 72 mmFlange thickness 4.2 mmDepth 27.1 mmScrew Circle 94 mm

The D2606/9200 is a 1" coatedsilk fabric dome tweeter. Thistweeter uses ferrofluid to cool thevoice coil and reduce the resonancepeak. The linear response face plateprovides a very smooth response at a fairly high sensitivity. The voicecoil is attached to the leads by a high power braided tinsel lead wire. Adamped cavity in the pole piecesreduces reflections and lowers the resonance frequency. The tweeter hasfield repairable voice coil assembles (600058). This tweeter was previouslyproduced under the part number D27TG15-06 and could be a goodreplacement for D26TG05 tweeters too, but with 5 screw holes instead of 4.

D2606/9220 6Ω

TECHNICAL DATA:Sensitivity 2.83V/1M 91.4dB Free air resonance Fs 850 HzDC resistance 4.6 ohmV.C. inductance 0.01 mHPower 12dB@Hz 100W@2KEffective cone area 7.1 cm2

V.C. diameter 26 mmV.C. height 2.1 mmAir gap height 2.5 mm

Lin. & max. excursion ±0.2 / ±1.6 mmAir gap flux density -Force factor BL Product 2.8 TmMoving mass incl. air 0.33 gOutside diameter 104 mmCutout diameter 72 mmFlange thickness 4.2 mmDepth 38.9 mmScrew Circle 94 mm

The D2606/9220 is a 1" coatedsilk fabric dome tweeter. Thistweeter uses ferrofluid to cool thevoice coil and reduce the resonancepeak. The large rear chamberprovides a low resonance frequencyand reduces reflections. The low fsallows for a lower crossover point. by a high power braided tinsel leadwire. The tweeter has fieldrepairable voice coil assembles(600058). This tweeter can be used to be produced under the part numberD27TG35-06 and is a good replacement for older D26TG35 tweeters. Itcan also replace the D27TG45, but with 4 screw holes instead of 5.

D2604/8330 4Ω

TECHNICAL DATA:Sensitivity 2.83V/1M 93 dB Free air resonance Fs 475 HzDC resistance 2.8 ohmV.C. inductance 0.04 mHPower 12dB@Hz 100W@2KEffective cone area 8 cm2

V.C. diameter 25 mmV.C. height 2.0 mmAir gap height 2.5 mm

Linear excursion ±0.3 mmAir gap flux density -Force factor BL Product - TmMoving mass incl. air 0.42 gOutside diameter 104 mmCutout diameter 72 mmFlange thickness 5 mmDepth 54.6 mmScrew Circle 92 mm

The D2604/8330 is a 1" textile domewith a large roll surround which providesextended frequency response above40kHz. The double magnet providegreater efficiency as well as a chamber toreduce reflections and lower theresonance frequency. The tweeter useshigh temperature copper-clad aluwire. The tweeter also has a well behaved rolloff on the low end, which should allowthe tweeter to use more simplifiedcrossovers. The off axis response is alsovery good, making this tweeter a good choice for automotive systems too. The low fs allows for a lower crossover point.

D2608/9130 8Ω

TECHNICAL DATA:Sensitivity 2.83V/1M 91.3dB Free air resonance Fs 700 HzDC resistance 5.6 ohmV.C. inductance 0.04 mHPower 12dB@Hz 100W@2KEffective cone area 7 cm2

V.C. diameter 26 mmV.C. height 1.5 mmAir gap height 2.5 mm

Linear excursion ±0.5 mmAir gap flux density -Force factor BL Product - TmMoving mass incl. air - gOutside diameter 104 mmCutout diameter 72 mmFlange thickness 4.5 mmDepth 32.3 mmScrew Circle 92 mm

The D2608/9130 has a very light 1" textile dome with high internaldamping. The optimized magnetsystem feature dual magnets, lowcompression and magnetic cooling fluid. The magnet system isdesigned to reduce reflections andturbulence. The face plate is black die cast aluminum. The 8 ohmimpedance, yet high efficiency of91.3dB makes this a rather uniquetweeter. The low resonance frequency and magnetic fluid will allow for alow crossover point. This tweeter is a good choice for all high end speakersystems.

Page 16: Scanspeak Full V10

R2604/8330 4Ω

TECHNICAL DATA:Sensitivity 2.83V/1M 92 dB Free air resonance Fs 440 HzDC resistance 2.9 ohmV.C. inductance 0.02 mHPower 12dB@Hz [email protected] cone area 5.4 cm2

V.C. diameter 25 mmV.C. height 2.2 mmAir gap height 2.5 mm

Linear excursion ±0.2 mmAir gap flux density -Force factor BL Product - TmMoving mass incl. air 0.3 gOutside diameter 104 mmCutout diameter 72 mmFlange thickness 5 mmDepth 54.6 mmScrew Circle 92 mm

The R2604/8330 features theunique dual ring radiator diaphragmmade from coated silk fabric. Thetweeter also uses a patented waveguide center plug to reducedistortion. The low resonancefrequency allows for a low crossover point. A special chamber lowers thefs and reduces internal reflections. The frequency range extends beyond 40kHz! Copper-clad aluwire assures good power handling at lower crossover points. The Double magnetincreases efficiency and extends the upper frequency range. TheD2604/8330 used to be produced under the part number XT25BG60.

R2604/8320 4Ω

TECHNICAL DATA:Sensitivity 2.83V/1M 90 dB Free air resonance Fs 550 HzDC resistance 2.9 ohmV.C. inductance 0.02 mHPower 12dB@Hz [email protected] cone area 5.4 cm2

V.C. diameter 25 mmV.C. height 2.2 mmAir gap height 2.5 mm

Linear excursion ±0.2 mmAir gap flux density -Force factor BL Product - TmMoving mass incl. air 0.3 gOutside diameter 104 mmCutout diameter 72 mmFlange thickness 5 mmDepth 39.8 mmScrew Circle 92 mm

The R2604/8320 features theunique dual ring radiator diaphragmmade from coated silk fabric. Thetweeter also uses a patented waveguide center plug to reducedistortion. The low resonancefrequency allows for a low crossover point. A special chamber lowers thefs and reduces internal reflections. The frequency range extends beyond 40kHz! Copper-clad aluwire assures good power handling at lowercrossover points. This tweeter has quickly become a favorite withloudspeaker designers. The D2604/8320 used to be produced under the part number XT25TG30.

TECHNICAL DATA:Sensitivity 2.83V/1M 92.0dB Free air resonance Fs 300 HzDC resistance 5.7 ohmV.C. inductance 0.13 mHPower 12dB@Hz 80W@500HzEffective cone area 55 cm2

V.C. diameter 76 mmV.C. height 2.9 mmAir gap height 2.0 mm

Linear excursion ±0.4.5 mmForce factor BL Product 4.7 TmMoving mass incl. air 3.3 gOutside diameter 152 mmCutout diameter 115.5 mmFlange thickness 4 mmDepth 25.6 mmScrew Circle 134 mm***Must use with 1 to 2 liter chamber

The D7608/9200-10 is oneof the last remaining 3"textile dome tweeters. Atextile dome mid is a perfectchoice for upper midrangewhere fast action is required. The pre-coated fabric domehas a very smooth and natural sounding response. The 3"voice coil provides good transient response and heat dispersion. An internal grill is used to protect the dome from being pushed in. The rear plate isperforated with holes, so the midrange requires the use of a 1 to 2 litersealed and stuffed chamber (not included). This midrange has exceptionaloff axis response and would be good in a car if you can work out a chamber.

D7608/9200-10 8Ω

The Discovery series is designed forthe discerning audiophile customer. The coated fiberglass cone reduces vibrationand standing waves, and the ventedmotor system minimizes powercompression. The combined result is avery open and dynamic sound. Thismidrange also features a strongneodymium magnet, NR surround andaluminum chassis. In 1 liter sealed your F3 is 275Hz, in 1.2 liters vented, 1"ventdiameter x 3", your F3 is 125Hz. Thisdriver has a very extended response.

TECHNICAL DATA:Sensitivity 2.83V/1M 89.8dB Free air resonance Fs 90 HzDC resistance 3.2 ohmV.C. inductance 0.1 mHPower RMS 15WEffective cone area 36 cm2

V.C. diameter 20 mmV.C. height 9.2 mmAir gap height 4 mm

Lin. & max. excursion ±2.6 / ±7mmForce factor BL Product 3.9 TmMoving mass incl. air 2.8 gNet weight 0.3 kgVas 2.0 litersQms 3.20Qes 0.32Qts 0.29Cms 1.1 mm/N

10F/4424G 4Ω4" Fiberglass Cone Midrange

Page 17: Scanspeak Full V10

The Discovery series is designed forthe discerning audiophile customer. The coated fiberglass cone reduces vibrationand standing waves, and the ventedmotor system minimizes powercompression. The combined result is avery open and dynamic sound. Thismidrange also features a strongneodymium magnet, NR surround andaluminum chassis. In 1 liter sealed your F3 is 275Hz, in 1.2 liters vented, 1"ventdiameter x 3", your F3 is 125Hz. Thisdriver has a very extended response.

TECHNICAL DATA:Sensitivity 2.83V/1M 86.6dB Free air resonance Fs 90 HzDC resistance 5.8 ohmV.C. inductance 0.1 mHPower RMS 15WEffective cone area 36 cm2

V.C. diameter 20 mmV.C. height 9.2 mmAir gap height 4 mm

Lin. & max. excursion ±2.6 / ±7mmForce factor BL Product 4.8 TmMoving mass incl. air 2.77 gNet weight 0.3 kgVas 2.1 litersQms 3.49Qes 0.41Qts 0.37Cms 1.14 mm/N

10F/8424G 8Ω4" Fiberglass Cone Midrange

The Discovery series is designed forthe discerning audiophile customer. The coated fiberglass cone reduces vibrationand standing waves. The phase plugimproves linearity and eliminatesdistortion caused by reflections thatoccur behind dust caps. The coated foam surround improves sensitivity.

Highlights: Aluminum Chassis,Fiberglass cone, coated foam surround,raised spider, aluminum shorting ring

Flange 149mm, cutout 114mm, depth60.9mm. Use in small sealed enclosure.

TECHNICAL DATA:Sensitivity 2.83V/1M 92.4 dB Free air resonance Fs 100 HzDC resistance 3.2 ohmV.C. inductance 0.23 mHPower RMS 75WEffective cone area 80 cm2

V.C. diameter 25 mmV.C. height 8 mmAir gap height 5 mm

Lin. & max. excursion ±1.5 / ±8mmForce factor BL Product 5.3 TmMoving mass incl. air 6.2 gNet weight 1.0 kgVas 3.7 litersQms 5.62Qes 0.47Qts 0.43Cms 0.41 mm/N

15M/4624G 4Ω5.25" Fiberglass Cone Mid

The Discovery series is designed forthe discerning audiophile customer. The coated fiberglass cone reduces vibrationand standing waves, and the ventedmotor system minimizes powercompression. Suitable as small wooferor midrange in a larger system.

Driver Highlights: AluminumChassis, Fiberglass cone, NR rubbersurround, Raised spider, shorting ring

Flange 124.7mm, cutout 100mm,depth 58.4mm. Use vented for use as awoofer or sealed for use as a midrange.

TECHNICAL DATA:Sensitivity 2.83V/1M 85.8 dB Free air resonance Fs 52 HzDC resistance 5.7 ohmV.C. inductance 0.6 mHPower RMS 40WEffective cone area 59 cm2

V.C. diameter 25 mmV.C. height 10 mmAir gap height 4 mm

Lin. & max. excursion ±3 / ±10mmForce factor BL Product 5.4 TmMoving mass incl. air 5.6 gNet weight 1.0 kgVas 8.2 litersQms 3.42Qes 0.35Qts 0.32Cms 1.67 mm/N

12W/8524G 8Ω4.5" Fiberglass Cone Woofer

The Discovery series is designed forthe discerning audiophile customer. The coated fiberglass cone reduces vibrationand standing waves, and the ventedmotor system minimizes powercompression. Suitable as small wooferor midrange in a larger system.

Driver Highlights: AluminumChassis, Fiberglass cone, NR rubbersurround, Raised spider, shorting ring

Flange 124.7mm, cutout 100mm,depth 58.4mm. Use vented for use as awoofer or sealed for use as a midrange.

TECHNICAL DATA:Sensitivity 2.83V/1M 88.8dB Free air resonance Fs 50 HzDC resistance 3.1 ohmV.C. inductance 0.4 mHPower RMS 40WEffective cone area 59 cm2

V.C. diameter 25 mmV.C. height 10 mmAir gap height 4 mm

Lin. & max. excursion ±3 / ±9mmForce factor BL Product 4.4 TmMoving mass incl. air 6.1 gNet weight 1.0 kgVas 8.2 litersQms 3.35Qes 0.30Qts 0.27Cms 1.67 mm/N

12W/4524G 4Ω4.5" Fiberglass Cone Woofer

Page 18: Scanspeak Full V10

The Discovery series is designed forthe discerning audiophile customer. The coated fiberglass cone reduces vibrationand standing waves, and the ventedmotor system minimizes powercompression. The combined result is avery open and dynamic sound.

Driver Highlights: AluminumChassis, Fiberglass cone, NR rubbersurround, raised spider, shorting ring

Flange 149mm, cutout 114mm, depth60.9mm. In 4 liter box with 1.5"diameter vent by 4" long, F3 is 80Hz.

TECHNICAL DATA:Sensitivity 2.83V/1M 869 dB Free air resonance Fs 45 HzDC resistance 5.7 ohmV.C. inductance 0.8 mHPower RMS 60WEffective cone area 80 cm2

V.C. diameter 32 mmV.C. height 13.4 mmAir gap height 5 mm

Lin. & max. excursion ±4.2 / ±8mmForce factor BL Product 7.3 TmMoving mass incl. air 8.61 gNet weight 1.2 kgVas 12.8 litersQms 3.74Qes 0.27Qts 0.25Cms 1.43 mm/N

15W/8434G 8Ω5.25" Fiberglass Cone Woofer

The Discovery series is designed forthe discerning audiophile customer. The coated fiberglass cone reduces vibrationand standing waves, and the ventedmotor system minimizes powercompression. The combined result is avery open and dynamic sound.

Driver Highlights: AluminumChassis, Fiberglass cone, NR rubbersurround, Raised spider, shorting ring

Flange 149mm, cutout 114mm, depth60.9mm. In 4 liter box with 1.5"diameter vent by 4" long, F3 is 80Hz.

TECHNICAL DATA:Sensitivity 2.83V/1M 89.7dB Free air resonance Fs 43 HzDC resistance 3.0 ohmV.C. inductance 0.5 mHPower RMS 60WEffective cone area 80 cm2

V.C. diameter 32 mmV.C. height 13.6 mmAir gap height 5 mm

Lin. & max. excursion ±4.3 / ±8mmForce factor BL Product 5.9 TmMoving mass incl. air 9.6 gNet weight 1.2 kgVas 12.8 litersQms 3.69Qes 0.22Qts 0.21Cms 1.43 mm/N

15W/4434G 4Ω5.25" Fiberglass Cone Woofer

The Discovery series is designed forthe discerning audiophile customer. The coated fiberglass cone reduces vibrationand standing waves, and the ventedmotor system minimizes powercompression. The combined result is avery open and dynamic sound.

Driver Highlights: AluminumChassis, Fiberglass cone, NR rubbersurround, Raised spider, shorting ring

Flange 179.6mm, cutout 144.3mm,depth 73.2mm. In 15 liter box with 2"diameter vent by 4.5" long, F3 is 55Hz.

TECHNICAL DATA:Sensitivity 2.83V/1M 88.7dB Free air resonance Fs 50 HzDC resistance 5.6 ohmV.C. inductance 0.55 mHPower RMS 55WEffective cone area 137 cm2

V.C. diameter 32 mmV.C. height 13.4 mmAir gap height 5 mm

Lin. & max. excursion ±4.2 / ±8mmForce factor BL Product 7.2 TmMoving mass incl. air 13.7 gNet weight 1.3 kgVas 19.5 litersQms 7.58Qes 0.46Qts 0.43Cms 0.74 mm/N

18W/8434G 8Ω6.5" Fiberglass Cone Woofer

The Discovery series is designed forthe discerning audiophile customer. The coated fiberglass cone reduces vibrationand standing waves, and the ventedmotor system minimizes powercompression. The combined result is avery open and dynamic sound.

Driver Highlights: AluminumChassis, Fiberglass cone, NR rubbersurround, Raised spider, shorting ring

Flange 179.6mm, cutout 144.3mm,depth 73.2mm. In 15 liter box with 2"diameter vent by 4.5" long, F3 is 55Hz.

TECHNICAL DATA:Sensitivity 2.83V/1M 91.3dB Free air resonance Fs 47 HzDC resistance 3.0 ohmV.C. inductance 0.39 mHPower RMS 55WEffective cone area 137 cm2

V.C. diameter 32 mmV.C. height 13.6 mmAir gap height 5 mm

Lin. & max. excursion ±4.3 / ±8mmForce factor BL Product 6.0 TmMoving mass incl. air 14.41 gNet weight 1.3 kgVas 20.7 litersQms 7.81Qes 0.37Qts 0.35Cms 0.79 mm/N

18W/4434G 4Ω6.5" Fiberglass Cone Woofer

Page 19: Scanspeak Full V10

The Discovery series is designed forthe discerning audiophile customer. The coated fiberglass cone reduces vibrationand standing waves, and the ventedmotor system minimizes powercompression. The combined result is avery open and dynamic sound.

Driver Highlights: AluminumChassis, Fiberglass cone, NR rubbersurround, Raised spider

Flange 272mm, cutout 231mm, depth100.5mm. In 100 liter box with 3"diameter vent by 8" long, F3 is 31Hz.

26W/8534G 8Ω10" Fiberglass Cone Woofer

The Discovery series is designed forthe discerning audiophile customer. The coated fiberglass cone reduces vibrationand standing waves, and the ventedmotor system minimizes powercompression. The combined result is avery open and dynamic sound.

Driver Highlights: AluminumChassis, Fiberglass cone, NR rubbersurround, Raised spider

Flange 272mm, cutout 231mm, depth100.5mm. In 85 liter box with 3"diameter vent by 8" long, F3 is 32Hz.

TECHNICAL DATA:Sensitivity 2.83V/1M 89 dB Free air resonance Fs 23 HzDC resistance 5.7 ohmV.C. inductance 0.96 mHPower RMS 70WEffective cone area 350 cm2

V.C. diameter 38 mmV.C. height 18 mmAir gap height 6 mm

Lin. & max. excursion ±6 / ±12mmForce factor BL Product 10.1 TmMoving mass incl. air 50.5 gNet weight 2.9 kgVas 150 litersQms 9.12Qes 0.42Qts 0.40Cms 0.95 mm/N

26W/4534G 4Ω10" Fiberglass Cone Woofer

The Discovery series is designed forthe discerning audiophile customer. The coated fiberglass cone reduces vibrationand standing waves, and the ventedmotor system minimizes powercompression. The combined result is avery open and dynamic sound.

Driver Highlights: Aluminum Chassis, Fiberglass cone, NR rubber surround,Raised spider

Flange 225mm, cutout 185mm, depth84.5mm. In 35 liter box with 2"diameter vent by 6" long, F3 is 45Hz.

TECHNICAL DATA:Sensitivity 2.83V/1M 88.8dB Free air resonance Fs 26 HzDC resistance 5.8 ohmV.C. inductance 0.71 mHPower RMS 70WEffective cone area 235 cm2

V.C. diameter 38 mmV.C. height 17.5 mmAir gap height 6 mm

Lin. & max. excursion ±5.8 / ±12mmForce factor BL Product 8.0 TmMoving mass incl. air 24.7 gNet weight 2.1 kgVas 118.3 litersQms 5.04Qes 0.37Qts 0.34Cms 1.52 mm/N

22W/8434G 8Ω8" Fiberglass Cone Woofer

The Discovery series is designed forthe discerning audiophile customer. The coated fiberglass cone reduces vibrationand standing waves, and the ventedmotor system minimizes powercompression. The combined result is avery open and dynamic sound.

Driver Highlights: AluminumChassis, Fiberglass cone, NR rubbersurround, Raised spider

Flange 225mm, cutout 185mm, depth84.5mm. In 35 liter box with 2"diameter vent by 4" long, F3 is 45Hz.

TECHNICAL DATA:Sensitivity 2.83V/1M 92.4dB Free air resonance Fs 30 HzDC resistance 3.0 ohmV.C. inductance 0.33 mHPower RMS 70WEffective cone area 235 cm2

V.C. diameter 38 mmV.C. height 17.3 mmAir gap height 6 mm

Lin. & max. excursion ±5.7 / ±12mmForce factor BL Product 6 TmMoving mass incl. air 23.7 gNet weight 2.1 kgVas 95 litersQms 3.70Qes 0.37Qts 0.34Cms 1.23 mm/N

22W/4534G 4Ω8" Fiberglass Cone Woofer

TECHNICAL DATA:Sensitivity 2.83V/1M 90.5 dB Free air resonance Fs 23 HzDC resistance 3.8 ohmV.C. inductance 0.70 mHPower RMS 70WEffective cone area 350 cm2

V.C. diameter 38 mmV.C. height 18 mmAir gap height 6 mm

Lin. & max. excursion ±6 / ±12mmForce factor BL Product 8.8 TmMoving mass incl. air 52 gNet weight 2.9 kgVas 156 litersQms 9.57Qes 0.37Qts 0.36Cms 0.92 mm/N

Page 20: Scanspeak Full V10

This passive is built similarly to theactive woofer. Same black anodizedaluminum cone, paper/fiberglass dustcap, cast frame, low damping large rollrubber surround and Nomex spider. Inplace of the voice coil, a weight is added to tune the passive radiator to 11Hz. More mass could be added to the weight, but too much mass will make the passive sluggish and may reduce the live of theproduct.

When paired with the 30W/4558T woofer, we recommend a 2.0 to 2.5cubic foot box for an F3 of about 30Hz. This F3 is about the same wetheryou use a boost on the amp or not. If not using a 25Hz boost, you will havea leaner and tighter bass and with the boost you will have a morepronounced bass.

You can also use this passive with the 26W/4558T in a 1.5 cubic foot boxwith a similar F3 of 35Hz, but with a 2dB gain in efficiency from the 10"passive.

TECHNICAL DATA:Free air resonance Fs 9.5 HzEffective cone area 466 cm2

Max excursion ±28mmMoving mass incl. air 435 gVas 200 litersQms 14Cms 0.65 mm/NRms 1.84 kg/s

30W/0-0012" Aluminum ConePassive RadiatorThis Discovery 12" subwoofer has

many fantastic features. The cone isblack anodized aluminum for stiffness. The dust cap is a layered paper andfiberglass. An aluminum shorting ringand aluminum pole piece extension isused to reduce distortion and powercompression. A Titanium voice coilformer improves power handling. Thevoice coil is vented below the spider and behind the dust cap for added VCcooling. Us in 2.5 cubic feet with 3"vent by 12" long for an F3 of 30Hz.

TECHNICAL DATA:Sensitivity 2.83V/1M 89dB Free air resonance Fs 17 HzDC resistance 2.6 ohmV.C. inductance 0.83 mHPower RMS 150WEffective cone area 466 cm2

V.C. diameter 51 mmV.C. height 33 mmAir gap height 8 mm

Lin. & max. excursion ±12.5/ ±28mmForce factor BL Product 10.5 TmMoving mass incl. air 135 gMagnet weight 2.25 kgVas 197 litersQms 5.01Qes 0.34Qts 0.32Cms 0.65 mm/N

30W/4558T 4Ω12" Aluminum Subwoofer

This passive is built similarly to theactive woofer. Same black anodizedaluminum cone, paper/fiberglass dustcap, cast frame, low damping large rollrubber surround and Nomex spider. Inplace of the voice coil, a weight is added to tune the passive radiator to 11Hz. More mass could be added to the weight, but too much mass will make the passive sluggish and may reduce the live of theproduct.

When paired with the 26W/4558T woofer in a 1 cubic foot box and anamplifier with a 25Hz boost, your F3 will be about 35Hz. Without a boostthe F3 is about 45Hz.

When using the 1 cubic foot box with passive radiator in a car, withoutany boost and with 6dB of cabin gain, your F3 is about 19Hz. This shouldbe very impressive in a car environment.

TECHNICAL DATA:Free air resonance Fs 11 HzEffective cone area 352 cm2

Max excursion ±28mmMoving mass incl. air 400 gVas 95 litersQms 13.7Cms 0.55 mm/NRms 1.97 kg/s

26W/0-0010" Aluminum Cone Passive RadiatorThis Discovery 10" subwoofer has

many fantastic features. The cone isblack anodized aluminum for stiffness. The dust cap is a layered paper andfiberglass. An aluminum shorting ringand aluminum pole piece extension isused to reduce distortion and powercompression. A Titanium voice coilformer improves power handling. Thevoice coil is vented below the spider and behind the dust cap for added VCcooling. Us in 2 cubic feet with 3" ventby 10" long for an F3 of 30Hz.

TECHNICAL DATA:Sensitivity 2.83V/1M 88dB Free air resonance Fs 21 HzDC resistance 2.6 ohmV.C. inductance 0.83 mHPower RMS 150WEffective cone area 352 cm2

V.C. diameter 51 mmV.C. height 33 mmAir gap height 8 mm

Lin. & max. excursion ±12.5/±28mmForce factor BL Product 10.5 TmMoving mass incl. air 105 gMagnet weight 2.25 kgVas 94.9 litersQms 5.56Qes 0.33Qts 0.31Cms 0.55 mm/N

26W/4558T 4Ω10" Aluminum Subwoofer

Page 21: Scanspeak Full V10

This classic 8" Vifa woofer now beingbuilt by Scan-speak. This classic woofer was used in many commercial products. The P21WO20 has a mineral filled polycone, rubber surround and cast frame. This woofer should be considered as agood replacement for other classic Vifaand Seas woofers in the same frame size.

You can use this woofer in a 45 literbox with a 3" diameter port by 8" longfor an F3 of 40Hz.

P21WO20 8Ω8" Poly Cone Woofer

This classic 6.5" Vifa woofer nowbeing built by Scan-speak was perhapsthe most popular driver in the world atone time. This classic woofer was usedin many commercial products. TheP17WJ00 has a mineral filled poly cone,rubber surround and cast frame. Thiswoofer should be considered as a goodreplacement for other classic Vifa andSeas woofers in the same frame size.

You can use this woofer in a 15 literbox with a 2" diameter port by 7" longfor an F3 of 55Hz.

TECHNICAL DATA:Sensitivity 2.83V/1M 88dB Free air resonance Fs 37 HzDC resistance 5.8 ohmV.C. inductance 0.55 mHPower RMS 40WEffective cone area 136 cm2

V.C. diameter 32 mmV.C. height 14 mmAir gap height 6 mm

Linear excursion ±4mmForce factor BL Product 6.5 TmMoving mass incl. air 14 gNet weight - kgVas 34.7 litersQms 1.55Qes 0.45Qts 0.35Cms - mm/N

P17WJ00 8Ω6.5" Poly Cone Woofer

This classic 5" Vifa woofer now beingbuilt by Scan-speak was used in manyDIY and commercial systems over theyears. The P13WH00 has a mineralfilled poly cone, rubber surround andcast frame. You might choose this as areplacement for similar Vifa drivers inthe 140mm frame size.

We understand this to be the lastproduction run of this speaker.

You can use this driver in a 6 liter boxwith a 1.5" diameter port by 4.5" longfor an F3 of 83Hz.

TECHNICAL DATA:Sensitivity 2.83V/1M 88 dB Free air resonance Fs 60 HzDC resistance 5.7 ohmV.C. inductance 0.7 mHPower RMS 40WEffective cone area 86 cm2

V.C. diameter 25 mmV.C. height 14 mmAir gap height 6 mm

Linear excursion ±4mmForce factor BL Product 6 TmMoving mass incl. air 7.5 gNet weight - kgVas 10 litersQms 1.38Qes 0.43Qts 0.33Cms - mm/N

P13WH00 8Ω5" Poly Cone Woofer

TECHNICAL DATA:Sensitivity 2.83V/1M 91 dB Free air resonance Fs 28 HzDC resistance 5.7 ohmV.C. inductance 0.9 mHPower RMS 80WEffective cone area 235 cm2

V.C. diameter 40 mmV.C. height 14 mmAir gap height 6 mm

Linear excursion ±4mmForce factor BL Product 7.4 TmMoving mass incl. air 22.5 gNet weight - kgVas 113 litersQms 1.6Qes 0.41Qts 0.33Cms - mm/N

HistoryFounded in 1970, Scan-Speak still resides at our original

address in Videbaek, Denmark. Located in the heart of theJutland peninsula, our acoustic engineers adhere to ourlegendary policy of "Never compromise". We nevercompromise on our product quality, sound quality or pursuitof perfection in a given application. We set the loudspeakerindustry's gold standard for audiophiles, and are constantlyviewed as a market benchmark by other high-end speakermanufacturers.

For close to 40 years, Scan-Speak has been on a quest to create transducers that reveal the finest details inrecordings, concealing nothing from the listener. This questhas resulted in several revolutionary inventions, wheredistortion in the magnet systems and the moving parts ofthe speaker is minimized. Our philosophy is simple: theemitted sound must be dynamic, giving a transient response and providing tonal balance.

Scan-Speak transducers have righteously been called "the best that money can buy", and we agree fully. All ourtransducers are hand-built with the utmost attention toquality at their core. Their prices reflect this, providingsolutions targeted towards high-end audiophile applications. Needless to say, Scan-Speak is dedicated to proving anunwavering high-quality in manufacturing.

Page 22: Scanspeak Full V10

Driver Di men sions in Mil li me ters Unit A B C DD2004/6020-00, R2004/6020-00 55.5 5 29.3 42.1D3004/6020-00, R3004/6020-00 61.9 5 21.5 48.5D3004/6020-10, R3004/6020-10 61.9 5 55.4 48.5D3004/6640-00, D3004/6600-00 104 5 23 77D3004/6620-00, D3004/6620-01 104 5 23 77R3004/6620-00, R3004/6620-01 104 5 23 77R2904/7000, D2904/7100 104 5.9 25 70D2905/9900 130 5 48 90D2008/8512 92 3.5 37.5 69D2010/8513 98 5 41 69D2905/9300, 9500, 9700 104.5 3 41 74D2904/9800 104.5 3 43 74D3806/8200 125 4 45 92D2606/9200 Discovery 104 4.2 27.1 72D2606/9220 Discovery 104 4.2 38.9 72D2604/8330 Discovery 104 5 54.6 72D2608/9130 Discovery 104 4.5 32.3 72R2604/8320 Discovery 104 5 39.8 72R2604/8330 Discovery 104 4 54.6 72D7608/9200-10 Dis cov ery Mid 152 4 25.6 115.510F's Discovery 97.5 3.5 40 7812MU's Illuminator 120 4 70 10112M's Revelator 115.5 3 48.4 9212W's Discovery 124.7 5 58.4 100

Driver Di men sions in Mil li me ters Unit A B C D13M's Classic 130 6 45.5 10315M & W's Discovery 149 4.8 61.9 11415M's Revelator 148 6 71 12515W's Revelator 148 6 71 12515WU's Illuminator 149 6.5 90 12318W's Discovery 179.6 5.2 73.2 144.318W's Revelator 182 5.5 77 15618W's Classic 177 4 70 15818WU's Illuminator 184 7.5 97.3 15822W's Discovery 225 5.2 84.5 18522W's Revelator 222 7 111 19423W's Revelator 255 6 135 22523W's Passives 255 6 73 22525W's Classic 255 6 86 22826W's Discovery 272 5.6 100.4 23126W Dis cov ery Subwoofer 270 5 135.5 24026W Dis cov ery Passive 270 5 70.9 24026W's Revelator 260 7 124.7 22830W Dis cov ery Subwoofer 308 5 144.3 28030W Dis cov ery Passive 308 5 80 280820012 & 820013 tweeter 42 8 18 39820012 woofer 130 3.8 52 113820013 woofer 165.5 3.3 63 141Flow Re sis tor (SSV) 130 3 19 109

25.4mm = 1"28.3 li ters = 1 cu bic foot

1 cu bic foot = 1728 cu bic inchesBox Vol ume = L x W x H

We can as sist you with yourspeaker de sign.

» 165mm Mid/Woofers "EURO-DIN"» Aluminum Die Cast Basket» Neodymium Magnet System» Vented Pole Piece» Black Coated NRSC* Fiberglass

Cone» Low Loss Rubber Surround

» 19mm Ring Dome Tweeters» Wedge Housing» Flange and Nut for Flush Mounting

» Crossovers (2nd Order @ 3000Hz)» Grill, Cables and Screws

*Non-Resonant-Suspension-CoupledReduces breakup modes.

SYSTEM DATA:Nominal Impedance 4 ohmSensitivity 2.83V/1M 90dB Frequency Range 60Hz - 28kHzCrossover frequency 3000Hz/12dBWOOFER DATA:Free air resonance Fs 55 HzEffective cone area Sd 138 cm2

V.C. diameter 32 mmLinear excursion ±4mmForce factor BL Product 4.8 TmMoving mass incl. air 12.5 gVas 12.6 litersQms 3.06Qes 0.56Qts 0.48Weight 590 g

Woofer diameter 165.5 mmCut out diameter 141 mmDepth 63 mmScrew mount diameter 156.5 mm +.75Flange thickness 3.3 mmTWEETER DATA:Free air resonance Fs 1000HzEffective cone area Sd 3.8 cm2Voice coil diameter 19mmWeight 60 gTweeter diameter 42 mmCut out diameter 39 mmDepth 18 mmOverall thickness 26 mmSurface or Wedge mount

25.4mm = 1"

820013 Autosound6" Car Component System

The Discovery car audio systems have been designed with the sameengineering and attention to detailthat has made their home speakersfamous.

The standard frame size andmultiply mounting options of thewoofer and the two mountingoptions for the tweeter shouldmake for an easy installation.

» 130mm Mid/Woofers "EURO-DIN"» Aluminum Die Cast Basket» Neodymium Magnet System» Vented Pole Piece» Black Coated NRSC* Fiberglass

Cone» Low Loss Rubber Surround

» 19mm Ring Dome Tweeters» Wedge Housing» Flange and Nut for Flush Mounting

» Crossovers (2nd Order @ 2500Hz)» Grill, Cables and Screws

*Non-Resonant-Suspension-CoupledReduces breakup modes.

SYSTEM DATA:Nominal Impedance 4 ohmSensitivity 2.83V/1M 88dB Frequency Range 70Hz - 28kHzCrossover frequency 2500Hz/12dBWOOFER DATA:Free air resonance Fs 80 HzEffective cone area Sd 80 cm2

V.C. diameter 32 mmLinear excursion ±4mmForce factor BL Product 4.8 TmMoving mass incl. air 10 gVas 4.6 litersQms 4.41Qes 0.65Qts 0.57Weight 510 g

Woofer diameter 130 mmAt mounting tabs 152 mmCut out diameter 113 mmDepth 52 mmScrew mount diameter 138 mm +2.5Flange thickness 3.8 mmTWEETER DATA:Free air resonance Fs 1000HzEffective cone area Sd 3.8 cm2Voice coil diameter 19mmWeight 60 gTweeter diameter 42 mmCut out diameter 39 mmDepth 18 mmOverall thickness 26 mmSurface or Wedge mount25.4mm = 1"

820012 Autosound5" Car Component System

The Discovery car audio systems have been designed with the sameengineering and attention to detailthat has made their home speakersfamous.

The standard frame size of thewoofer and the two mountingoptions for the tweeter shouldmake for an easy installation.

Founded in 1970, Scan-Speak is one of the oldest and most experiencedloudspeaker manufacturers in the world. Their "Never Compromise"philosophy assures you as a customer that the product will be engineeredand built to exceptional standards.

Please visit the Scan-speak website for a history of the company, as wellas the most updated news, information and specifications.

www.scan-speak.dk