ROBOSHOT @ + series - FANUC

Specifications

Note: When high filling mode is used, a special cylinder is needed. Molding conditions may be restricted depending on the screw diameter. For details, see a separate list of specifications.　

Clampingunit

Injectionunit

kN

mm

mmmmmm

point/kN/mmmmcm3

---MPaMPaMPamm/smin-1


UnitItem

150（15tonf）260/130

---160

260×235355×340

1/7（0.7tonf）/50

525mm/s

525450

800mm/s

800450

149

---250250

---250250

1611

---250230

---250230

1819

---230190

---230190

149

---250250

---250250

1611

330250250

330250250

1819

300260260

300260260

2024

---270250

---270250

2229

---220200

---220200

149

---250250

---250250

1611

330250250

330250250

1819

300260260

300260260

2024

---270250

---270250

2229

---220200

---220200

2024

360280280

360280280

2229

340260240

340260240

2650

290210190

275210190

2858

250190160

240190160

3276

---150130

---------------

149

---250250

---------------

1611

---250250

---250250

1819

300260260

300260260

2024

360280280

360280280

2229

340260240

340260240

2650

290210190

275210190

2858

250190160

240190160

3276

---150130

---------------

300（30tonf）330/150

---230

310×290440×420

1/8（0.8tonf）/60

525mm/s

525450

800mm/s

800450

300（30tonf）High precision clamp

330/150---

230310×290440×420

1/8（0.8tonf）/60

525mm/s

525450

800mm/s

800450

500（50tonf）350/150410/210

250360×320500×470

5 / 20（2.0tonf）/ 70

330mm/s

330450

500mm/s


350/150---

250360×320500×470

5 / 20（2.0tonf）/ 70

330mm/s

330450

500mm/s

500450

Clampingunit

Injectionunit

Injectionunit

kN

mm

mmmmmm

point/kN/mmmmcm3

---MPaMPamm/smin-1



---MPaMPamm/smin-1

UnitItem1000（100tonf）

450/150520/220

350460×410660×610

5 / 25（2.5tonf）/ 100

200mm/s

200300

330mm/s

330450

500mm/s

1000mm/s (Ultra high speed)

1300（130tonf）---

570/200400

530×530730×730

5 / 25（2.5tonf）/ 100

200mm/s

200300

------

------

------

1500（150tonf）500/200575/275

440560×510800×750

5 / 35（3.5tonf）/ 150

------

330mm/s (Small capacity)

330450



200mm/s

200300

330mm/s

330400

------

------

2229

260260

340260260

340260260

400380

2650

260260

340260260

320260260

380350

2858

240220

320240220

280240220500450

350300

32103

220200

270220200

---220200

270230

36147

190170

220190170

---170170

------------

40181

160140

---160140

---------------

------------

32103

220200

---------

---------

------

36147

190170

---------

---------

------

40181

160140

---------

---------

------

2229

------

340260260

340260260

400350

2650

------

340260260

320260260

380250

2858

------

320240220

280240220500450

350210

32103

------

270220200

---220200

270160

36147

------

220190170

---170170

------------

40181

------

---160140

---------------

------------

32121

280280

380280280

---------

------

36153

280280

345280280

---------

------

40188

260220

280260260

---------

------

44268

220190

---220220

---------

------

48318

190160

---190190

---------

------

52442

160130

---160160

---------

------

Tonnage

Maximum and minimum Double platen mold height Single platen

Clamping strokeTie bar spacing (H × V)

Platen size (H × V)Ejector point / Ejector force / Ejector stroke

Screw diameterMaximum injection volume

Injection speci�cationMaximum injection pressure (High pressure �lling mode)Maximum injection pressure

Maximum pack pressureMaximum injection speed

Maximum screw rotation speedInjection speci�cation

Maximum injection pressure (High pressure �lling mode)Maximum injection pressure


Maximum screw rotation speed

TonnageMaximum and minimum Double platen

mold height Single platenClamping stroke

Tie bar spacing (H × V)Platen size (H × V)

Ejector point / Ejector force / Ejector strokeScrew diameter

Maximum injection volumeInjection speci�cation

Maximum injection pressureMaximum pack pressure

Maximum injection speedMaximum screw rotation speed









Clampingunit

UnitItemkN

mm

mmmmmm

point/kN/mmmmcm3


---MPaMPamm/smin-1











1000450

1200450

500450

2012

32121

380280280

------

32103

---380330

------

2858

---450430

------

2650

---450450

------

52442

---160130

------

48318

---190160

------------

44268

---220190

------

36153

345280280

------

40188

280260260

------

44268

---220220

------

48318

---190190

------

52442

---160160

------

40188

---280280

280280

44268

---280260

260260

400

48318

---270240

230230270

52442

---240220

200200

56640

---225195

172172

300

64836

---175150

------

68944

---155130

------

56640

---225195

------

64836

---175150

400

------

68944

---155130

------

721059

---135120

300

------

330mm/s

330400

------

1200mm/s

1200450

------

2500 （250tonf）650/300

---600

710×6351030×960

13 / 80（8.0tonf）/ 200

2200（220tonf）---

650/250550

650×650900×900

13 / 35（3.5tonf）/ 150

200mm/s

200300

3000 （300tonf）650/300

---600

810×7101130×1030

13 / 80（8.0tonf）/ 200

240mm/s

240400

270mm/s

4500（450tonf）1000/350

---900

920×9201300×1300

21 / 150（15.0tonf）/ 250

240mm/s

240

------

------

<ROBOSHOT @ + series

High-performance, high-reliability and high-productivity electric injection molding machine

Oshino-mura, Yamanashi 401-0597, Japan Phone: 81-555-84-5555 Fax: 81-555-84-5512 http://www.fanuc.co.jp ●The content of this catalog describes the specifications as of Sep., 2018.●All specifications are subject to change without notice.●No part of this catalog may be reproduced in any form.●The photo includes options.●The products in this catalog are controlled based on Japan’s “Foreign Exchange and Foreign Trade Law”. The export from Japan may be subject to an export license by the government of Japan. Further, re-export to another country may be subject to the license of the government of the country from where the product is re-exported.Furthermore, the product may also be controlled by re-export regulations of the United States government. Should you wish to export or re-export these products, please contact FANUC for advice.

RSHOTα-SiA(E)-06, 2018.9, Printed in Japan

Highly-Rigid and Low-Friction Mechanism

Additional Servo Axis Control

Precision and stable molding

High-Performance of Molding High-Performance of MoldingFANUC standard CNC achieves superior molding repeatabilityHighly-rigid and low-friction mechanism achieve precision moldingAdditional servo axis control achieves extra value in molding

High-SustainabilityFANUC standard servo system achieves high-reliability and lower energy consumptionHigh-precision AI protect function minimizes downtime

ROBOSHOT-LINK+ manages product and quality information

Ease of UseFully enclosed cover style achieves both safety and accessibilityConformity to safety standards supports molding plant globalizationRobot system with superior interoperability

Minimize Downtime

ROBOSHOT-LINK+

High-Reliability

High-Sustainability Ease of Use

Conformity to Safety Standards

Robot System

Fully Enclosed Cover Style

FANUC standard CNC and servo system installedElectric injection molding machine achieves high quality, high reliability and high productivity

The outer view and operation differ in specifications.

Applying the latest CNC & servotechnology

Good combination with FANUC Robot

2 3

4 5

Weight variation

Conventional

Precisemetering

Precise connectorResin : PA66

▲75%

Conventional

Precise metering

Backflow monitor

・Detects backflow precisely at injection start, Displays injection repeatability in graph [Suitable feeding device]

・Achieves optimal amount of resin supply by feedback control, Achieves long term molding repeatability

[Servo nozzle touch]

・Controls nozzle touch force during molding cycle optimally

High-Performance of MoldingFANUC standard CNC achieves superior molding repeatability

Backflow monitor screen

[Single platen]Expands mold area

Magnetic clamping systemThree plates mold etc.

Multi cavitiesThin wall molding etc. Low-friction linear guides

Servo nozzle touch mechanism

Servo motor

Servo motor

*Only additional servo system will be offered

*:Optional. Available options differ in region and model.

Lead frame

Container with screwResin：PS

LED partsResin : LCP

Suitable feeding device

[Double platen]Pursuits high rigidity

Stable Unstable

Highly-rigid and low-friction mechanism achieves precision molding

Precise metering

・Controls screw movement during metering optimally, Prevents string and silver streaking

・Eliminates backflow of resin, Stabilizes injection volume and reduces weight variation of molded products

Clamping unit

・Selectable two types of moving platen*・Low-friction linear guided support*

Injection unit

・Adopts low-friction linear guides, Achieves smooth injection and metering motion

Additional servo axis control achieves extra value in molding (Option)Additional servo axis control advances ROBOSHOT further

Additional servo axis control achieves versatile applications*

・High-speed and accuracy positioning by FANUC servo technology・No additional control equipment required, Integrated into ROBOSHOT operation

[Unscrewing molding] [Hoop molding]

Reduces shear heating・Prevents molding defects such as burn

Superior platen parallelism・Achieves precise molding and longer life of mold

Promotes gas ventilation・Reduces residue on mold surface・Prevents wearing of screw and cylinder

Standard forα-S15iA/α-S30iA/α-S50iA/α-S100iA/α-S130iA

6 7

AI mold protectionON

AI mold protectionOFF

Mobile terminal FANUCROBOSHOT-LINK+

FANUCROBOSHOT-LINK+

ClampServo motor

EjectorServo motor Experimental example of AI mold

protection by using paper cup

1.Realtime monitoringMonitors load of servo motors in every cycle

2.Problem detectionDetects load deviation precisely caused by remaining molded products etc.

3.ProtectionInterrupts clamp and ejector motion immediately

High-precision AI protect function minimizes downtimeAI mold protection・Detects remaining molded products during mold closing or abnormal sliding core motion during mold opening with high-accuracy

・Interrupts motion immediately after abnormal status detected, Protects mold and ejector pin from damage

Visualization of production amount and operating time

Visualization of cause of failure

・Production and quality information management tool supports larger-scale and globalization of molding plant

・“Visualization” of ROBOSHOT data

ROBOSHOT-LINK+ROBOSHOT-LINK+ manages product and quality information (Optional)

Product information management

・Achieves lower cost and higher operation rate

・Monitors consumption power including auxiliary equipments

Quality information management

・Achieves traceability and advanced quality・Investigates cause of failure and molding repeatability

・High-efficiency servo system reuses regenerated power during deceleration of motors, Excellent energy saving performance・Displays consumption power and regenerated power on operation screen・Monitors power consumption including auxiliary equipments*

High-SustainabilityFANUC standard servo system achieves high-reliability and lower energy consumption

Consumption power monitor screen


High-performance servo motors and amplifiers α+series

8 9

Ease of UseFully enclosed cover style achieves both safety and accessibility

Conformity to safety standards supports molding plant globalizationRegional safety standards and multiple languages support

Safety requirements differ in regionPlease confirm the latest safety requirements of the region where ROBOSHOT is installed.

High-level safety

・Fully enclosed cover style prevents contact with moving part and high temperature part with high-level safety

・Achieves compact machine dimensions

Superior accessibility

・Wide opened hopper maintenance area, Enhances accessibility

Multiple languages supportJapanese / English / Chinese simplified / Chinese traditional / Korean / Thai / VietnameseIndonesian / German / French / Italian / Spanish (Mexican) / Portuguese / Czech / FinnishDutch / Hungarian / Danish / Polish

The Japan society of Industrial Machinery manufacturer’s Standards

National Standard of the P.R.C.

CE Marking KCs Mark ANSI/SPIKorea North America

Japan

China

EU

Robot system with superior interoperability*Superior interoperability

・Wire-saving connection by high speed and reliable I/O Link・Allows principle robot operation on ROBOSHOT screen・”Visualization” of molding plant by ROBOSHOT-LINK+

ROBOSHOT-LINK+

FANUCROBOSHOT-LINK+

Operating statusof FANUC Robot Product and quality

informationof ROBOSHOT

Status signal ・Safety signal

I/O Link

Robot systemization example[Automatized check・sort]1.Precision and stable molding by ROBOSHOT

2.Automatic check and sort after parts detection by FANUC Robot

1.Precision insert of partsby FANUC Robot

2.Precision and stable molding by ROBOSHOT

Precision connectorResin : LCP

Automotive interior partResin : ABS


[Automatized check・insert]

ROBOSHOTFANUC >

5mm

10 11

Decompression control at injection to packing (8 modes)・Prevents sink marks and warpage, Achieves uniformed thickness distribution

High pressure resistance cylinder and High pressure filling mode* ・Achieves thinner wall molding by injection with ultra high pressure

Application to a range of molding fieldsThin wall light guide panel

Light guide panel for smartphone Resin : PC

Precise lens

Camera lens for smartphoneResin : COC

Precise connector

Precise fine-pitch connectorResin : LCP

Automotive parts

Automotive connectorResin : PBT

Medical parts

SyringeResin : COP

*:Optional, Available options differ in region and model.

Air connector for air ejector

Terminal box(I/O for mold)

Purge cover

100V Outlet

Thermal insulationcover

200V Outlet

Optional, Available options differ in region and model.Refer to the “specification list” for details on the options.

Telescopic multi colorsignal tower(LED type)

Hot runner controller(Built-in)

Manifoldsfor piping

Mold heatercontroller

Interface for auxiliaryequipments

Options

Maintenance and customer supportWorldwide customer service and supportFANUC operates customer service and support system anywhere in the world through subsidiaries, affiliates and distributor partners. FANUC provides the highest quality service with the quickest response at the location nearest you.

FANUC ACADEMYFANUC ACADEMY operates training programs on FANUC ROBOSHOT which focus on practical operations and molding know how and maintenance.

Moving platen support by linear guides* ・Superior platen parallelism and straightness of clamp motion

Screw and cylinder for lens molding・Optimized screw design and surface treatment achieves high-quality molding

Single platen・Expanded mold installation area, Supports magnetic clamping system

Hot runner controller (Built-in)*・Integrated into ROBOSHOT operation, Achieves precise temperature control

Fully enclosed cover style・Clean and quiet, Ideal for molding in clean roomSuitable feeding device*・Prevents burn and carbonization, Suitable for molding with transparent resin

Two components molding

Automotive interior partResin : ABS+PP

Second injection unit*・FANUC CNC installed, operate from ROBOSHOT screenAdditional servo axis control*・Integrated into ROBOSHOT operation, Achieves high-speed and accuracy positioning of rotary table

Precise metering・Reduces weight variation and eliminates stringy, Achieves long term molding repeatability

Nozzle for Liquid Crystal Polymer*・Optimized nozzle and temperature control for LCP achieves high-quality molding, Prevents resin carbonization

Inquiries : Oshino-mura, Yamanashi, Japan 401-0597Phone : 81-555-84-6030 Fax : 81-555-84-5540

Headquarters

Coventry

ParisBarcelonaMilanBudapestSofiaBrusselsLinz

Bangalore

BeijingShanghai Chicago

Detroit

ChangwonTaichung

Johannesburg

Aguascalientas

Sao Paulo

LuxembourgStuttgartPragueIstanbulMoscowWroclawStockholmBielCelje

ManilaBangkokHo Chi MinhKuala LumpurSingaporeJakarta

Sydney

World Wide Support Over 260 OfficesFANUC Global Service Network

Specifications

Note: When high filling mode is used, a special cylinder is needed. Molding conditions may be restricted depending on the screw diameter. For details, see a separate list of specifications.　

Clampingunit

Injectionunit

kN

mm

mmmmmm

point/kN/mmmmcm3



UnitItem

150（15tonf）260/130

---160

260×235355×340

1/7（0.7tonf）/50

525mm/s

525450

800mm/s

800450

149

---250250

---250250

1611

---250230

---250230

1819

---230190

---230190

149

---250250

---250250

1611

330250250

330250250

1819

300260260

300260260

2024

---270250

---270250

2229

---220200

---220200

149

---250250

---250250

1611

330250250

330250250

1819

300260260

300260260

2024

---270250

---270250

2229

---220200

---220200

2024

360280280

360280280

2229

340260240

340260240

2650

290210190

275210190

2858

250190160

240190160

3276

---150130

---------------

149

---250250

---------------

1611

---250250

---250250

1819

300260260

300260260

2024

360280280

360280280

2229

340260240

340260240

2650

290210190

275210190

2858

250190160

240190160

3276

---150130

---------------

300（30tonf）330/150

---230

310×290440×420

1/8（0.8tonf）/60

525mm/s

525450

800mm/s

800450


330/150---

230310×290440×420

1/8（0.8tonf）/60

525mm/s

525450

800mm/s

800450

500（50tonf）350/150410/210

250360×320500×470

5 / 20（2.0tonf）/ 70

330mm/s

330450

500mm/s


350/150---

250360×320500×470

5 / 20（2.0tonf）/ 70

330mm/s

330450

500mm/s

500450

Clampingunit

Injectionunit

Injectionunit

kN

mm

mmmmmm

point/kN/mmmmcm3

---MPaMPamm/smin-1



---MPaMPamm/smin-1

UnitItem1000（100tonf）

450/150520/220

350460×410660×610

5 / 25（2.5tonf）/ 100

200mm/s

200300

330mm/s

330450

500mm/s


1300（130tonf）---

570/200400

530×530730×730

5 / 25（2.5tonf）/ 100

200mm/s

200300

------

------

------

1500（150tonf）500/200575/275

440560×510800×750

5 / 35（3.5tonf）/ 150

------


330450



200mm/s

200300

330mm/s

330400

------

------

2229

260260

340260260

340260260

400380

2650

260260

340260260

320260260

380350

2858

240220

320240220

280240220500450

350300

32103

220200

270220200

---220200

270230

36147

190170

220190170

---170170

------------

40181

160140

---160140

---------------

------------

32103

220200

---------

---------

------

36147

190170

---------

---------

------

40181

160140

---------

---------

------

2229

------

340260260

340260260

400350

2650

------

340260260

320260260

380250

2858

------

320240220

280240220500450

350210

32103

------

270220200

---220200

270160

36147

------

220190170

---170170

------------

40181

------

---160140

---------------

------------

32121

280280

380280280

---------

------

36153

280280

345280280

---------

------

40188

260220

280260260

---------

------

44268

220190

---220220

---------

------

48318

190160

---190190

---------

------

52442

160130

---160160

---------

------

Tonnage

Maximum and minimum Double platen mold height Single platen

Clamping strokeTie bar spacing (H × V)

Platen size (H × V)Ejector point / Ejector force / Ejector stroke

Screw diameterMaximum injection volume






Maximum screw rotation speed
















Clampingunit

UnitItemkN

mm

mmmmmm

point/kN/mmmmcm3


---MPaMPamm/smin-1











1000450

1200450

500450

2012

32121

380280280

------

32103

---380330

------

2858

---450430

------

2650

---450450

------

52442

---160130

------

48318

---190160

------------

44268

---220190

------

36153

345280280

------

40188

280260260

------

44268

---220220

------

48318

---190190

------

52442

---160160

------

40188

---280280

280280

44268

---280260

260260

400

48318

---270240

230230270

52442

---240220

200200

56640

---225195

172172

300

64836

---175150

------

68944

---155130

------

56640

---225195

------

64836

---175150

400

------

68944

---155130

------

721059

---135120

300

------

330mm/s

330400

------

1200mm/s

1200450

------

2500 （250tonf）650/300

---600

710×6351030×960

13 / 80（8.0tonf）/ 200

2200（220tonf）---

650/250550

650×650900×900

13 / 35（3.5tonf）/ 150

200mm/s

200300

3000 （300tonf）650/300

---600

810×7101130×1030

13 / 80（8.0tonf）/ 200

240mm/s

240400

270mm/s

4500（450tonf）1000/350

---900

920×9201300×1300

21 / 150（15.0tonf）/ 250

240mm/s

240

------

------

<ROBOSHOT @ + series

High-performance, high-reliability and high-productivity electric injection molding machine

Oshino-mura, Yamanashi 401-0597, Japan Phone: 81-555-84-5555 Fax: 81-555-84-5512 http://www.fanuc.co.jp ●The content of this catalog describes the specifications as of Sep., 2018.●All specifications are subject to change without notice.●No part of this catalog may be reproduced in any form.●The photo includes options.●The products in this catalog are controlled based on Japan’s “Foreign Exchange and Foreign Trade Law”. The export from Japan may be subject to an export license by the government of Japan. Further, re-export to another country may be subject to the license of the government of the country from where the product is re-exported.Furthermore, the product may also be controlled by re-export regulations of the United States government. Should you wish to export or re-export these products, please contact FANUC for advice.

RSHOTα-SiA(E)-06, 2018.9, Printed in Japan

ROBOSHOT @ + series - FANUC

Documents

Transcript of ROBOSHOT @ + series - FANUC