Resistors - High Power, Low CostResistors - High Power, Low Cost Key Benefits • Low-cost...

2
Resistors - High Power, Low Cost KEY BENEFITS Low-cost wirewound/metal oxide resistors Fireproof construction required for UL-approved circuitry Wide range of wattage ratings (1 W to 20 W) Wide resistance value range (0.1 Ω to 50 KΩ) CPCC and CPCF models have vertical-mount construction for board space savings APPLICATIONS Capacitance discharge Pulsing applications High power dissipation Voltage dividers DC/DC converters RESOURCES Datasheet: CA High Volume - http://www.vishay.com/doc?30114 Datasheet: CP High Volume - http://www.vishay.com/doc?30113 Datasheet: CPCC/CPCF High Volume - http://www.vishay.com/doc?30116 Datasheet: CPR High Volume - http://www.vishay.com/doc?30261 For technical questions contact [email protected] CA, CP, CPCC, CPCF, CPR High Volume WIREWOUND/METAL OXIDE RESISTORS I N NO V A T I O N A N D T E C H N O L O G Y 1 9 6 2 - 2 0 1 2 VisHAy inteRteCHnoLogy, inC. tHis DoCUment is sUbjeCt to CHAnge WitHoUt notiCe. tHe PRoDUCts DesCRibeD HeRein AnD tHis DoCUment ARe sUbjeCt to sPeCiFiC DisCLAimeRs, set FoRtH At www.vishay.com/doc?91000 Vmn-Pt9147-1201 1/2 Discrete Semiconductors and Passive Components One of the World’s Largest Manufacturers of PRoDUCt sHeet High Volume, Low-Cost, Axial Leaded, Wirewound/Metal Oxide, Commercial Power Resistors

Transcript of Resistors - High Power, Low CostResistors - High Power, Low Cost Key Benefits • Low-cost...

Page 1: Resistors - High Power, Low CostResistors - High Power, Low Cost Key Benefits • Low-cost wirewound/metal oxide resistors • Fireproof construction required for UL-approved circuitry

Res

isto

rs -

Hig

h P

ower

, Low

Cos

t

Key Benefits• Low-costwirewound/metaloxideresistors

• FireproofconstructionrequiredforUL-approvedcircuitry

• Widerangeofwattageratings(1Wto20W)

• Wideresistancevaluerange(0.1Ωto50KΩ)

• CPCCandCPCFmodelshavevertical-mountconstructionforboardspacesavings

APPLiCAtiOns• Capacitancedischarge

• Pulsingapplications

• Highpowerdissipation

• Voltagedividers

• DC/DCconverters

ResOuRCes• Datasheet:CAHighVolume-http://www.vishay.com/doc?30114

• Datasheet:CPHighVolume-http://www.vishay.com/doc?30113

• Datasheet:CPCC/CPCFHighVolume-http://www.vishay.com/doc?30116

• Datasheet:CPRHighVolume-http://www.vishay.com/doc?30261

[email protected]

CA,CP,CPCC,CPCF,CPRHighVolumeWiReWOund/MetAL Oxide ResistORs

INN

OVA

TI

ON AND TECHNO

LO

GY

1 9 6 2 - 2 0 1 2

V isHAy inteRteCHnoLogy, inC .

tHisDoCUmentissUbjeCttoCHAngeWitHoUtnotiCe.tHePRoDUCtsDesCRibeDHeReinAnDtHisDoCUmentAResUbjeCttosPeCiFiCDisCLAimeRs,setFoRtHAtwww.vishay.com/doc?91000

Vmn-Pt9147-12011/2

Discrete Semiconductors and Passive ComponentsOne of the World’s Largest Manufacturers of

PRoDUCtsHeet

High Volume, Low-Cost, Axial Leaded, Wirewound/Metal Oxide, Commercial Power Resistors

Page 2: Resistors - High Power, Low CostResistors - High Power, Low Cost Key Benefits • Low-cost wirewound/metal oxide resistors • Fireproof construction required for UL-approved circuitry

Res

isto

rs -

Hig

h P

ower

, Low

Cos

t

tHisDoCUmentissUbjeCttoCHAngeWitHoUtnotiCe.tHePRoDUCtsDesCRibeDHeReinAnDtHisDoCUmentAResUbjeCttosPeCiFiCDisCLAimeRs,setFoRtHAtwww.vishay.com/doc?91000

Vmn-Pt9147-12012/2PRoDUCtsHeet

CA,CP,CPCC,CPCF,CPRHighVolumeWiReWOund/MetAL Oxide ResistORs

INN

OVA

TI

ON AND TECHNO

LO

GY

1 9 6 2 - 2 0 1 2

V isHAy inteRteCHnoLogy, inC .

High Volume, Low-Cost, Axial Leaded, Wirewound/Metal Oxide, Commercial Power Resistors

Revision04-Fev-11

Revision10-jan-11

Axial Lead (CA)

Axial Lead (CP)

Document Number: 30114For technical questions, contact: [email protected]

www.vishay.com

Revision: 04-Feb-11

1

Wirewound Resistors, Commercial Power, Axial Lead

CA High VolumeVishay Dale

FEATURES• High performance for low cost • Auto insertable

• High temperature coating forenvironmental protection• Compliant to RoHS Directive 2002/95/ECAPPLICATIONSKitchen appliances: • Percolators, blenders, mixers, ranges, toasters, deep

fryers Entertainment and consumer devices:• Radios, televisions • Computers and power supplies

STANDARD ELECTRICAL SPECIFICATIONSGLOBAL MODEL POWER RATINGP25 °C

WRESISTANCE RANGE

TOLERANCE± %

WEIGHT(typical)

g

CA0001

1.00.1 to 1K

5, 100.65

CA0002

2.00.1 to 1K

5, 100.80

TECHNICAL SPECIFICATIONSPARAMETERUNIT

CA HIGH VOLUME RESISTOR CHARACTERISTICS

Temperature Coefficientppm/°C

± 350

Short Time Overload-

5 x rated power for 5 s

Maximum Working VoltageV

(P x R)1/2

Dielectric Withstanding Voltage VAC

350

Operating Temperature Range °C

- 65 to + 275

Terminal Strength (minimum)lb

10GLOBAL PART NUMBER INFORMATIONGlobal Part Numbering example: CA000150R00JE66

GLOBAL MODELVALUE

TOLERANCEPACKAGING

SPECIAL

(See Standard Electrical Specifications table/Global Model column for options)

R = DecimalK = ThousandR1500 = 0.15 1K000 = 1000

J = ± 5.0 %K = ± 10.0 %

E66 = Lead (Pb)-free, tape/reel (Dash Number)(up to 3 digits)From 1 to 999 as applicable

** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902

0 0 1 5 R 0 00

A 0

J E 6

C

6

Document Number: 30114 For technical questions, contact: [email protected] www.vishay.comRevision: 04-Feb-11 1

Wirewound Resistors, Commercial Power, Axial Lead

CA High VolumeVishay Dale

FEATURES• High performance for low cost

• Auto insertable

• High temperature coating forenvironmental protection

• Compliant to RoHS Directive 2002/95/EC

APPLICATIONSKitchen appliances:

• Percolators, blenders, mixers, ranges, toasters, deepfryers

Entertainment and consumer devices:

• Radios, televisions

• Computers and power supplies

STANDARD ELECTRICAL SPECIFICATIONS

GLOBAL MODELPOWER RATING

P25 °CW

RESISTANCE RANGE

TOLERANCE± %

WEIGHT(typical)

g

CA0001 1.0 0.1 to 1K 5, 10 0.65

CA0002 2.0 0.1 to 1K 5, 10 0.80

TECHNICAL SPECIFICATIONSPARAMETER UNIT CA HIGH VOLUME RESISTOR CHARACTERISTICS

Temperature Coefficient ppm/°C ± 350

Short Time Overload - 5 x rated power for 5 s

Maximum Working Voltage V (P x R)1/2

Dielectric Withstanding Voltage VAC 350

Operating Temperature Range °C - 65 to + 275

Terminal Strength (minimum) lb 10

GLOBAL PART NUMBER INFORMATIONGlobal Part Numbering example: CA000150R00JE66

GLOBAL MODEL VALUE TOLERANCE PACKAGING SPECIAL

(See Standard Electrical Specifications table/Global Model column

for options)

R = DecimalK = Thousand

R1500 = 0.15 1K000 = 1000

J = ± 5.0 %K = ± 10.0 %

E66 = Lead (Pb)-free, tape/reel (Dash Number)(up to 3 digits)

From 1 to 999 as applicable

** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902

0 0 1 5 R 0 00A 0 J E 6C 6

Document Number: 30114 For technical questions, contact: [email protected] www.vishay.comRevision: 04-Feb-11 1

Wirewound Resistors, Commercial Power, Axial Lead

CA High VolumeVishay Dale

FEATURES• High performance for low cost

• Auto insertable

• High temperature coating forenvironmental protection

• Compliant to RoHS Directive 2002/95/EC

APPLICATIONSKitchen appliances:

• Percolators, blenders, mixers, ranges, toasters, deepfryers

Entertainment and consumer devices:

• Radios, televisions

• Computers and power supplies

STANDARD ELECTRICAL SPECIFICATIONS

GLOBAL MODELPOWER RATING

P25 °CW

RESISTANCE RANGE

TOLERANCE± %

WEIGHT(typical)

g

CA0001 1.0 0.1 to 1K 5, 10 0.65

CA0002 2.0 0.1 to 1K 5, 10 0.80

TECHNICAL SPECIFICATIONSPARAMETER UNIT CA HIGH VOLUME RESISTOR CHARACTERISTICS

Temperature Coefficient ppm/°C ± 350

Short Time Overload - 5 x rated power for 5 s

Maximum Working Voltage V (P x R)1/2

Dielectric Withstanding Voltage VAC 350

Operating Temperature Range °C - 65 to + 275

Terminal Strength (minimum) lb 10

GLOBAL PART NUMBER INFORMATIONGlobal Part Numbering example: CA000150R00JE66

GLOBAL MODEL VALUE TOLERANCE PACKAGING SPECIAL

(See Standard Electrical Specifications table/Global Model column

for options)

R = DecimalK = Thousand

R1500 = 0.15 1K000 = 1000

J = ± 5.0 %K = ± 10.0 %

E66 = Lead (Pb)-free, tape/reel (Dash Number)(up to 3 digits)

From 1 to 999 as applicable

** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902

0 0 1 5 R 0 00A 0 J E 6C 6

Document Number: 30114 For technical questions, contact: [email protected] www.vishay.comRevision: 04-Feb-11 1

Wirewound Resistors, Commercial Power, Axial Lead

CA High VolumeVishay Dale

FEATURES• High performance for low cost

• Auto insertable

• High temperature coating forenvironmental protection

• Compliant to RoHS Directive 2002/95/EC

APPLICATIONSKitchen appliances:

• Percolators, blenders, mixers, ranges, toasters, deepfryers

Entertainment and consumer devices:

• Radios, televisions

• Computers and power supplies

STANDARD ELECTRICAL SPECIFICATIONS

GLOBAL MODELPOWER RATING

P25 °CW

RESISTANCE RANGE

TOLERANCE± %

WEIGHT(typical)

g

CA0001 1.0 0.1 to 1K 5, 10 0.65

CA0002 2.0 0.1 to 1K 5, 10 0.80

TECHNICAL SPECIFICATIONSPARAMETER UNIT CA HIGH VOLUME RESISTOR CHARACTERISTICS

Temperature Coefficient ppm/°C ± 350

Short Time Overload - 5 x rated power for 5 s

Maximum Working Voltage V (P x R)1/2

Dielectric Withstanding Voltage VAC 350

Operating Temperature Range °C - 65 to + 275

Terminal Strength (minimum) lb 10

GLOBAL PART NUMBER INFORMATIONGlobal Part Numbering example: CA000150R00JE66

GLOBAL MODEL VALUE TOLERANCE PACKAGING SPECIAL

(See Standard Electrical Specifications table/Global Model column

for options)

R = DecimalK = Thousand

R1500 = 0.15 1K000 = 1000

J = ± 5.0 %K = ± 10.0 %

E66 = Lead (Pb)-free, tape/reel (Dash Number)(up to 3 digits)

From 1 to 999 as applicable

** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902

0 0 1 5 R 0 00A 0 J E 6C 6

www.vishay.com

For technical questions, contact: [email protected] Document Number: 30113

44

Revision: 10-Jan-11

CP High VolumeVishay Dale

Wirewound/Metal Oxide Resistors, Commercial Power, Axial Lead

FEATURES• High performance for low cost• High power to size ratio• Ceramic cases are available with circuit boardstand-offs (designated with a ...3 model ending)• Special cement potting compound and ceramiccase provide high thermal conductivity in afireproof package

• Compliant to RoHS Directive 2002/95/ECSTANDARD ELECTRICAL SPECIFICATIONSGLOBAL MODEL

POWER RATINGP40 °C

W

RESISTANCE RANGE ΩWIREWOUND

RESISTANCE RANGE Ω METAL OXIDE

TOLERANCE± %

WEIGHT(typical)

gCP0002 2 0.1 to 100 101 to 30K 5, 10 2.0

CP0003 3 0.1 to 100 101 to 33K 5, 10 3.4

CP0005 5 0.1 to 100 101 to 50K 5, 10 3.6

CP0005...3 5 0.1 to 100 101 to 50K 5, 10 4.8

CP0007 7 0.1 to 100 101 to 50K 5, 10 5.0

CP0007...3 7 0.1 to 100 101 to 50K 5, 10 6.8

CP0010 10 0.1 to 100 101 to 50K 5, 10 9.5

CP0010...3 10 0.1 to 100 101 to 50K 5, 10 9.9

CP0015 15 0.1 to 100 101 to 50K 5, 10 16.8

CP0020 20 0.1 to 100 101 to 50K 5, 10 22.8TECHNICAL SPECIFICATIONSPARAMETER UNIT WIREWOUND CHARACTERISTICS METAL OXIDE CHARACTERISTICSTemperature Coefficient ppm/°C ± 400

± 400Short Time Overload - 5 x rated power for 5 s

5 x rated power for 5 sTerminal Strength lb 10 minimum

10 minimumOperating Temperature Range °C - 65 to + 275

- 65 to + 225Dielectric Withstanding Voltage VAC 1000

1000Maximum Working Voltage V (P x R)1/2

(P x R)1/2

GLOBAL PART NUMBER INFORMATIONGlobal Part Numbering example: CP000515R00JE663

GLOBAL MODEL VALUE TOLERANCE PACKAGINGSPECIAL

(See Standard Electrical Specifications Global

Model column for options)

R = DecimalK = Thousand

R1500 = 0.15 Ω1K500 = 1500 Ω

J = ± 5.0 %K = ± 10.0 %

E66 = Lead (Pb)-free bulk pack (Dash Number)(up to 3 digits)From 1 to 999as applicable

** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902

P 0 0 0 5 1 5 R 0 0 J E 6 6

C

3

www.vishay.com For technical questions, contact: [email protected] Document Number: 3011344 Revision: 10-Jan-11

CP High VolumeVishay Dale

Wirewound/Metal Oxide Resistors, Commercial Power, Axial Lead

FEATURES• High performance for low cost

• High power to size ratio

• Ceramic cases are available with circuit boardstand-offs (designated with a ...3 model ending)

• Special cement potting compound and ceramiccase provide high thermal conductivity in afireproof package

• Compliant to RoHS Directive 2002/95/EC

STANDARD ELECTRICAL SPECIFICATIONS

GLOBAL MODELPOWER RATING

P40 °CW

RESISTANCE RANGE ΩWIREWOUND

RESISTANCE RANGE Ω METAL OXIDE

TOLERANCE± %

WEIGHT(typical)

g

CP0002 2 0.1 to 100 101 to 30K 5, 10 2.0

CP0003 3 0.1 to 100 101 to 33K 5, 10 3.4

CP0005 5 0.1 to 100 101 to 50K 5, 10 3.6

CP0005...3 5 0.1 to 100 101 to 50K 5, 10 4.8

CP0007 7 0.1 to 100 101 to 50K 5, 10 5.0

CP0007...3 7 0.1 to 100 101 to 50K 5, 10 6.8

CP0010 10 0.1 to 100 101 to 50K 5, 10 9.5

CP0010...3 10 0.1 to 100 101 to 50K 5, 10 9.9

CP0015 15 0.1 to 100 101 to 50K 5, 10 16.8

CP0020 20 0.1 to 100 101 to 50K 5, 10 22.8

TECHNICAL SPECIFICATIONSPARAMETER UNIT WIREWOUND CHARACTERISTICS METAL OXIDE CHARACTERISTICS

Temperature Coefficient ppm/°C ± 400 ± 400

Short Time Overload - 5 x rated power for 5 s 5 x rated power for 5 s

Terminal Strength lb 10 minimum 10 minimum

Operating Temperature Range °C - 65 to + 275 - 65 to + 225

Dielectric Withstanding Voltage VAC 1000 1000

Maximum Working Voltage V (P x R)1/2 (P x R)1/2

GLOBAL PART NUMBER INFORMATIONGlobal Part Numbering example: CP000515R00JE663

GLOBAL MODEL VALUE TOLERANCE PACKAGING SPECIAL(See Standard Electrical

Specifications Global Model column for

options)

R = DecimalK = Thousand

R1500 = 0.15 Ω1K500 = 1500 Ω

J = ± 5.0 %K = ± 10.0 %

E66 = Lead (Pb)-free bulk pack (Dash Number)(up to 3 digits)From 1 to 999as applicable

** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902

P 0 0 0 5 1 5 R 0 0 J E 6 6C 3

www.vishay.com For technical questions, contact: [email protected] Document Number: 3011344 Revision: 10-Jan-11

CP High VolumeVishay Dale

Wirewound/Metal Oxide Resistors, Commercial Power, Axial Lead

FEATURES• High performance for low cost

• High power to size ratio

• Ceramic cases are available with circuit boardstand-offs (designated with a ...3 model ending)

• Special cement potting compound and ceramiccase provide high thermal conductivity in afireproof package

• Compliant to RoHS Directive 2002/95/EC

STANDARD ELECTRICAL SPECIFICATIONS

GLOBAL MODELPOWER RATING

P40 °CW

RESISTANCE RANGE ΩWIREWOUND

RESISTANCE RANGE Ω METAL OXIDE

TOLERANCE± %

WEIGHT(typical)

g

CP0002 2 0.1 to 100 101 to 30K 5, 10 2.0

CP0003 3 0.1 to 100 101 to 33K 5, 10 3.4

CP0005 5 0.1 to 100 101 to 50K 5, 10 3.6

CP0005...3 5 0.1 to 100 101 to 50K 5, 10 4.8

CP0007 7 0.1 to 100 101 to 50K 5, 10 5.0

CP0007...3 7 0.1 to 100 101 to 50K 5, 10 6.8

CP0010 10 0.1 to 100 101 to 50K 5, 10 9.5

CP0010...3 10 0.1 to 100 101 to 50K 5, 10 9.9

CP0015 15 0.1 to 100 101 to 50K 5, 10 16.8

CP0020 20 0.1 to 100 101 to 50K 5, 10 22.8

TECHNICAL SPECIFICATIONSPARAMETER UNIT WIREWOUND CHARACTERISTICS METAL OXIDE CHARACTERISTICS

Temperature Coefficient ppm/°C ± 400 ± 400

Short Time Overload - 5 x rated power for 5 s 5 x rated power for 5 s

Terminal Strength lb 10 minimum 10 minimum

Operating Temperature Range °C - 65 to + 275 - 65 to + 225

Dielectric Withstanding Voltage VAC 1000 1000

Maximum Working Voltage V (P x R)1/2 (P x R)1/2

GLOBAL PART NUMBER INFORMATIONGlobal Part Numbering example: CP000515R00JE663

GLOBAL MODEL VALUE TOLERANCE PACKAGING SPECIAL(See Standard Electrical

Specifications Global Model column for

options)

R = DecimalK = Thousand

R1500 = 0.15 Ω1K500 = 1500 Ω

J = ± 5.0 %K = ± 10.0 %

E66 = Lead (Pb)-free bulk pack (Dash Number)(up to 3 digits)From 1 to 999as applicable

** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902

P 0 0 0 5 1 5 R 0 0 J E 6 6C 3

www.vishay.com For technical questions, contact: [email protected] Document Number: 302611 Revision: 25-Jul-11

This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

CPR High VolumeVishay Dale

Wirewound/Metal Oxide Resistors, Commercial Power, Radial Terminals

FEATURES• Direct mounting on printed circuit board

• Circuit board lock-in mounting tabs

• High performance for low cost

• Special inorganic potting compound andceramic case provide high thermalconductivity in a fireproof package

• Compliant to RoHS Directive 2002/95/EC

Note(1) The xx is for the two digit “special” number as specified in Global Part Number Information section. Standard part number without the two

digit “special” is 10.5 mm length (15 mm for CPR20), 1 pin terminals.

STANDARD ELECTRICAL SPECIFICATIONS

GLOBALMODEL (1)

POWER RATINGP40 °C

W

RESISTANCE RANGE

WIREWOUND

RESISTANCE RANGE

METAL OXIDE

TOLERANCE± %

WEIGHT(typical)

g

CPR03...xx 3 0.1 to 100 101 to 30K 5, 10 5.5CPR05...xx 5 0.1 to 100 101 to 33K 5, 10 6.5CPR07...xx 7 0.5 to 100 101 to 50K 5, 10 9.5CPR10...xx 10 0.5 to 100 101 to 50K 5, 10 10CPR15...xx 15 1.0 to 100 101 to 50K 5, 10 20.3CPR20...xx 20 1.0 to 100 101 to 50K 5, 10 25.5

TECHNICAL SPECIFICATIONS PARAMETER UNIT CPR HIGH VOLUME RESISTOR CHARACTERISTICS

Temperature Coefficient ppm/°C ± 400

Short Time Overload - 5 x rated power for 5 s

Maximum Working Voltage V (P x R)1/2

Terminal Strength lb 10 minimum

Operating Temperature Range °C - 65 to + 275 for wirewound, - 65 to + 225 for metal oxide

GLOBAL PART NUMBER INFORMATION

Global Part Numbering example: CPR05100R0JE6630

GLOBAL MODEL VALUE TOLERANCE PACKAGING SPECIAL

CPR03CPR05CPR07CPR10CPR15CPR20

R = DecimalK = Thousand

R1500 = 0.151K500 = 1500

J = ± 5.0 %K = ± 10.0 %

E66 = Lead (Pb)-free, bulk Blank = Short, 1 pinCPRxx...30 = Long, 1 pinCPRxx...31 = Short, 2 pinCPRxx...32 = Long, 2 pin

** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902

P R 0 5 1 0 0 R 0 J E 6 6C 3 0

Vertical Mount (CPCC/CPCF)

Radial Terminals (CPR)

www.vishay.com For technical questions, contact: [email protected] Document Number: 301161 Revision: 20-Dec-10

CPCC, CPCF High VolumeVishay Dale

Wirewound/Metal Oxide Resistors, Commercial Power, Vertical Mount

FEATURES• Space saving

• Direct mounting on printed circuit board

• High power to size ratio

• Special cement potting compound and ceramiccase provide high thermal conductivity in afireproof package

• Compliant to RoHS Directive 2002/95/EC

STANDARD ELECTRICAL SPECIFICATIONS

GLOBAL MODEL

POWER RATINGP40 °C

W

RESISTANCE RANGE

WIREWOUND

RESISTANCE RANGE

METAL OXIDE

TOLERANCE± %

WEIGHT(typical)

g

CPCC02 2 0.1 to 100 NA 5, 10 4.7

CPCF02 2 NA 101 to 50K 5, 10 4.7

CPCC03 3 0.1 to 100 NA 5, 10 5.5

CPCF03 3 NA 101 to 50K 5, 10 5.5

CPCC05 5 0.1 to 100 NA 5, 10 6.9

CPCF05 5 NA 101 to 50K 5, 10 6.9

CPCC07 7 0.1 to 100 NA 5, 10 9.2

CPCF07 7 NA 101 to 50K 5, 10 9.2

CPCC10 10 0.1 to 100 NA 5, 10 14.3

TECHNICAL SPECIFICATIONSPARAMETER UNIT CPCC, CPCF HIGH VOLUME RESISTOR CHARACTERISTICS

Temperature Coefficient ppm/°C ± 400

Short Time Overload - 5 x rated power for 5 s

Maximum Working Voltage V (P x R)1/2

Operating Temperature Range °C - 65 to + 275 for wirewound, - 65 to + 225 for metal oxide

Terminal Strength lb 10 minimum

Dielectric Withstanding Voltage VAC 1000

GLOBAL PART NUMBER INFORMATION

Global Part Numbering example: CPCC0515R00JE66

GLOBAL MODEL VALUE TOLERANCE PACKAGING SPECIAL

(See Standard Electrical Specifications Global

Model column for options)

R = DecimalK = Thousand

R1500 = 0.15 1K500 = 1500

J = ± 5.0 %K = ± 10.0 %

E66 = Lead (Pb)-free bulk pack (Dash Number)(up to 3 digits)From 1 to 999as applicable

** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902

P C C 0 5 1 5 R 0 0 J E 6 6C

www.vishay.com For technical questions, contact: [email protected] Document Number: 301161 Revision: 20-Dec-10

CPCC, CPCF High VolumeVishay Dale

Wirewound/Metal Oxide Resistors, Commercial Power, Vertical Mount

FEATURES• Space saving

• Direct mounting on printed circuit board

• High power to size ratio

• Special cement potting compound and ceramiccase provide high thermal conductivity in afireproof package

• Compliant to RoHS Directive 2002/95/EC

STANDARD ELECTRICAL SPECIFICATIONS

GLOBAL MODEL

POWER RATINGP40 °C

W

RESISTANCE RANGE

WIREWOUND

RESISTANCE RANGE

METAL OXIDE

TOLERANCE± %

WEIGHT(typical)

g

CPCC02 2 0.1 to 100 NA 5, 10 4.7

CPCF02 2 NA 101 to 50K 5, 10 4.7

CPCC03 3 0.1 to 100 NA 5, 10 5.5

CPCF03 3 NA 101 to 50K 5, 10 5.5

CPCC05 5 0.1 to 100 NA 5, 10 6.9

CPCF05 5 NA 101 to 50K 5, 10 6.9

CPCC07 7 0.1 to 100 NA 5, 10 9.2

CPCF07 7 NA 101 to 50K 5, 10 9.2

CPCC10 10 0.1 to 100 NA 5, 10 14.3

TECHNICAL SPECIFICATIONSPARAMETER UNIT CPCC, CPCF HIGH VOLUME RESISTOR CHARACTERISTICS

Temperature Coefficient ppm/°C ± 400

Short Time Overload - 5 x rated power for 5 s

Maximum Working Voltage V (P x R)1/2

Operating Temperature Range °C - 65 to + 275 for wirewound, - 65 to + 225 for metal oxide

Terminal Strength lb 10 minimum

Dielectric Withstanding Voltage VAC 1000

GLOBAL PART NUMBER INFORMATION

Global Part Numbering example: CPCC0515R00JE66

GLOBAL MODEL VALUE TOLERANCE PACKAGING SPECIAL

(See Standard Electrical Specifications Global

Model column for options)

R = DecimalK = Thousand

R1500 = 0.15 1K500 = 1500

J = ± 5.0 %K = ± 10.0 %

E66 = Lead (Pb)-free bulk pack (Dash Number)(up to 3 digits)From 1 to 999as applicable

** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902

P C C 0 5 1 5 R 0 0 J E 6 6C

www.vishay.com For technical questions, contact: [email protected] Document Number: 301161 Revision: 20-Dec-10

CPCC, CPCF High VolumeVishay Dale

Wirewound/Metal Oxide Resistors, Commercial Power, Vertical Mount

FEATURES• Space saving

• Direct mounting on printed circuit board

• High power to size ratio

• Special cement potting compound and ceramiccase provide high thermal conductivity in afireproof package

• Compliant to RoHS Directive 2002/95/EC

STANDARD ELECTRICAL SPECIFICATIONS

GLOBAL MODEL

POWER RATINGP40 °C

W

RESISTANCE RANGE

WIREWOUND

RESISTANCE RANGE

METAL OXIDE

TOLERANCE± %

WEIGHT(typical)

g

CPCC02 2 0.1 to 100 NA 5, 10 4.7

CPCF02 2 NA 101 to 50K 5, 10 4.7

CPCC03 3 0.1 to 100 NA 5, 10 5.5

CPCF03 3 NA 101 to 50K 5, 10 5.5

CPCC05 5 0.1 to 100 NA 5, 10 6.9

CPCF05 5 NA 101 to 50K 5, 10 6.9

CPCC07 7 0.1 to 100 NA 5, 10 9.2

CPCF07 7 NA 101 to 50K 5, 10 9.2

CPCC10 10 0.1 to 100 NA 5, 10 14.3

TECHNICAL SPECIFICATIONSPARAMETER UNIT CPCC, CPCF HIGH VOLUME RESISTOR CHARACTERISTICS

Temperature Coefficient ppm/°C ± 400

Short Time Overload - 5 x rated power for 5 s

Maximum Working Voltage V (P x R)1/2

Operating Temperature Range °C - 65 to + 275 for wirewound, - 65 to + 225 for metal oxide

Terminal Strength lb 10 minimum

Dielectric Withstanding Voltage VAC 1000

GLOBAL PART NUMBER INFORMATION

Global Part Numbering example: CPCC0515R00JE66

GLOBAL MODEL VALUE TOLERANCE PACKAGING SPECIAL

(See Standard Electrical Specifications Global

Model column for options)

R = DecimalK = Thousand

R1500 = 0.15 1K500 = 1500

J = ± 5.0 %K = ± 10.0 %

E66 = Lead (Pb)-free bulk pack (Dash Number)(up to 3 digits)From 1 to 999as applicable

** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902

P C C 0 5 1 5 R 0 0 J E 6 6C

www.vishay.com For technical questions, contact: [email protected] Document Number: 302611 Revision: 25-Jul-11

This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

CPR High VolumeVishay Dale

Wirewound/Metal Oxide Resistors, Commercial Power, Radial Terminals

FEATURES• Direct mounting on printed circuit board

• Circuit board lock-in mounting tabs

• High performance for low cost

• Special inorganic potting compound andceramic case provide high thermalconductivity in a fireproof package

• Compliant to RoHS Directive 2002/95/EC

Note(1) The xx is for the two digit “special” number as specified in Global Part Number Information section. Standard part number without the two

digit “special” is 10.5 mm length (15 mm for CPR20), 1 pin terminals.

STANDARD ELECTRICAL SPECIFICATIONS

GLOBALMODEL (1)

POWER RATINGP40 °C

W

RESISTANCE RANGE

WIREWOUND

RESISTANCE RANGE

METAL OXIDE

TOLERANCE± %

WEIGHT(typical)

g

CPR03...xx 3 0.1 to 100 101 to 30K 5, 10 5.5CPR05...xx 5 0.1 to 100 101 to 33K 5, 10 6.5CPR07...xx 7 0.5 to 100 101 to 50K 5, 10 9.5CPR10...xx 10 0.5 to 100 101 to 50K 5, 10 10CPR15...xx 15 1.0 to 100 101 to 50K 5, 10 20.3CPR20...xx 20 1.0 to 100 101 to 50K 5, 10 25.5

TECHNICAL SPECIFICATIONS PARAMETER UNIT CPR HIGH VOLUME RESISTOR CHARACTERISTICS

Temperature Coefficient ppm/°C ± 400

Short Time Overload - 5 x rated power for 5 s

Maximum Working Voltage V (P x R)1/2

Terminal Strength lb 10 minimum

Operating Temperature Range °C - 65 to + 275 for wirewound, - 65 to + 225 for metal oxide

GLOBAL PART NUMBER INFORMATION

Global Part Numbering example: CPR05100R0JE6630

GLOBAL MODEL VALUE TOLERANCE PACKAGING SPECIAL

CPR03CPR05CPR07CPR10CPR15CPR20

R = DecimalK = Thousand

R1500 = 0.151K500 = 1500

J = ± 5.0 %K = ± 10.0 %

E66 = Lead (Pb)-free, bulk Blank = Short, 1 pinCPRxx...30 = Long, 1 pinCPRxx...31 = Short, 2 pinCPRxx...32 = Long, 2 pin

** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902

P R 0 5 1 0 0 R 0 J E 6 6C 3 0

www.vishay.com For technical questions, contact: [email protected] Document Number: 302611 Revision: 25-Jul-11

This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

CPR High VolumeVishay Dale

Wirewound/Metal Oxide Resistors, Commercial Power, Radial Terminals

FEATURES• Direct mounting on printed circuit board

• Circuit board lock-in mounting tabs

• High performance for low cost

• Special inorganic potting compound andceramic case provide high thermalconductivity in a fireproof package

• Compliant to RoHS Directive 2002/95/EC

Note(1) The xx is for the two digit “special” number as specified in Global Part Number Information section. Standard part number without the two

digit “special” is 10.5 mm length (15 mm for CPR20), 1 pin terminals.

STANDARD ELECTRICAL SPECIFICATIONS

GLOBALMODEL (1)

POWER RATINGP40 °C

W

RESISTANCE RANGE

WIREWOUND

RESISTANCE RANGE

METAL OXIDE

TOLERANCE± %

WEIGHT(typical)

g

CPR03...xx 3 0.1 to 100 101 to 30K 5, 10 5.5CPR05...xx 5 0.1 to 100 101 to 33K 5, 10 6.5CPR07...xx 7 0.5 to 100 101 to 50K 5, 10 9.5CPR10...xx 10 0.5 to 100 101 to 50K 5, 10 10CPR15...xx 15 1.0 to 100 101 to 50K 5, 10 20.3CPR20...xx 20 1.0 to 100 101 to 50K 5, 10 25.5

TECHNICAL SPECIFICATIONS PARAMETER UNIT CPR HIGH VOLUME RESISTOR CHARACTERISTICS

Temperature Coefficient ppm/°C ± 400

Short Time Overload - 5 x rated power for 5 s

Maximum Working Voltage V (P x R)1/2

Terminal Strength lb 10 minimum

Operating Temperature Range °C - 65 to + 275 for wirewound, - 65 to + 225 for metal oxide

GLOBAL PART NUMBER INFORMATION

Global Part Numbering example: CPR05100R0JE6630

GLOBAL MODEL VALUE TOLERANCE PACKAGING SPECIAL

CPR03CPR05CPR07CPR10CPR15CPR20

R = DecimalK = Thousand

R1500 = 0.151K500 = 1500

J = ± 5.0 %K = ± 10.0 %

E66 = Lead (Pb)-free, bulk Blank = Short, 1 pinCPRxx...30 = Long, 1 pinCPRxx...31 = Short, 2 pinCPRxx...32 = Long, 2 pin

** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902

P R 0 5 1 0 0 R 0 J E 6 6C 3 0

Revision10-Dec-10

Revision25-jul-11