Research Publications · Applications (EApp-2016), 27–29 June Sathyabama University, Chennai,...

42
1

Transcript of Research Publications · Applications (EApp-2016), 27–29 June Sathyabama University, Chennai,...

1

2

Research Publications (journal and Conferences)S.No. Title Authors Conference/Journal name

(with vol, page and year)

Scopus index

(yes/No)

1. Molecular detection and environment-specific diversity of

glycosyl hydrolase family 1 β-glucosidase in different

habitats.

Tiwari, R., Singh, P., Singh,

Surender, Shukla, P., Nain, P.K.S.

and Nain, L.

Frontiers in Microbiology, 2016, doi:

10.3389/fmicb.2016.01597 (2016) SCI, IF:4.165

2. Simultaneous saccharification and fermentation of alkali-

pretreated corncob under optimized conditions using cold-

tolerant indigenous holocellulase.

Sharma, A., Nain, V., Tiwari, R.,

Singh, S., Adak, A., Nain, P.K.S.

and Nain, Lata

Korean Journal of Chemical Engineering (online

first)DOI:10.1007/s11814-016-0334-9. (2017)IF: 1.408

Scopus and SCI

3. Drag reduction of a circular cylinder by an upstream

splitter plate

Subham Jain, Shubham Sharma

& Sudipto Sarkar

Journal of Material Science and Mechanical

Engineering, 2016, Volume 3, Issue 6, pp. 378-

383

No

4. Control of vortex shedding by a short asymmetrically

located downstream splitter plate

Smriti Srivastava & Sudipto

Sarkar

Journal of Material Science and Mechanical

Engineering, 2016, Volume 3, Issue 6, pp. 384-

389

No

5. Vortex control by a vertical splitter plate placed upstream

of a square cylinder in non-Newtonian flow

Nidhi, Sudipto Sarkar & Anamika

Paul

Journal of Aeronautical and Automotive

Engineering, 2016, Volume 3, Issue 2, pp. 43-48. No

6. Pseudoplastic fluid flow around a square cylinder with a

downstream splitter plate

Babli Varsha, Sudipto Sarkar &

Anamika Paul

Journal of Basic and Applied Engineering

Research, 2016, Volume 3, Issue 11, pp. 1004-

1009

No

7. Influence of Process Parameters on Machining Al-SiC-Gr

Hybrid Composites.

P.Suresh & P. Mathiyalagan Journal of Material Science and Mechanical

Engineering, Vol. 3, no. 3, 2016, pp. 192-196.

8. Influence of Process Parameters on Machining Al-SiC-Gr

Hybrid Composites.

P.Suresh & P. Mathiyalagan Recent trends in Mechanical, Material Science,

Manufacturing, Automobile, Aerospace

Engineering and Applied Physics, organized by

Krishi Sanskriti, April 20163

Continue…..S.No. Title Authors Conference/Journal name

(with vol, page and year)

Scopus index

(yes/No)

9. Performance Measurement of Service Sectors with a

Special Reference to Health Care Industries using ISM,

TOPSIS & Fuzzy TOPSIS

Dr.P.Mathiyalagan International journal of Vehicle structures and

systems, Accepted,

10. Inventory Optimization: A Meta Heuristics Approach” Dr.P.Mathiyalagan International Journal of Advanced Research

Methodology in Engineering & Technology

11. Multi-Objective Optimization Of Performance

Characteristics In Machining Of Al/Sic/Gr Hybrid

Composites Using Grey Relational Analysis

P.Suresh & P. Mathiyalagan International Journal of Exploring Emerging

Trends in Engineering,

Vol. 03, Issue 04, JUL-AUG, 2016 Pg. 291 - 297

12.

Automation of Bottle Filling System in Industries

using PLC AND SCADA

Tarun Pratap Singh, Shivam

Singh, Vipul Maurya, P.Suresh

International Research Journal of Engineering

and Technology,

Volume: 03 Issue: 09, Sep-2016

13. Mechanical Properties of Coconut Fiber Reinforced Epoxy

Polymer Composites

Satender Kumar, Kakali Deka, P.

Suresh

International Research Journal of Engineering and

Technology, Volume: 03 Issue: 07, July-2016

14. Effect of fiber content on Mechanical properties of Glass

fiber reinforced polymer (GFRP) Composites

J. Ronald Aseer, K. Deka,

S.Kumar, S. Muralidharan,

A. Sharma

International journal of Materials Science and

Mechanical Engineering (JMSME), Vol 3(3), 239-

242, 2016

15. Effect of Filler Content on Thermal Properties of Municipal

Solid Waste and Bahunia Racemosa Fiber Composites,

J. Ronald Aseer, A. Karakoti, K. S.

N. Samy

Journal of Basic and Applied Engineering

Research (JBAER), 2016

16. Chemical and Morphology Characteristics of Micro Fiber

Isolated from Grewia Optiva for biocomposites

J. Ronald Aseer, A. Karakoti, S.

Biswas, K. S. N. Samy, P. Vikranth

In the proceeding of IVth International

conference The 4th on Advances in Materials &

Materials Processing (iCAMMP-IV 2016), 5-7

November, IIT Kharagpur. Karagpur, India

4

Continue…..S.No. Title Authors Conference/Journal name

(with vol, page and year)

Scopus index

(yes/No)

17. Effect of Fiber Content on Thermal Properties of Municipal

Solid Waste and Bahunia Racemosa Fiber Composites

J. Ronald Aseer, A. Karakoti, K. S.

N. Samy,

In the proceeding of International Conference on

Recent Trends in Mechanical, Material, Industrial,

Automotive, Aeronautical and Nano-Technology

(MIANT-2016), 01 October, Jawaharlal Nehru

University, New Delhi

18 Characteristics Study of Mechanical Milled Alumina and

Zirconia powders by X Ray Diffraction

J. Ronald Aseer, S. R. Elsen, K.

Jagadeesan

In the proceeding of International Conference on

Nanoscience and Nanotechnology for Energy

Applications (EApp-2016), 27–29 June

Sathyabama University, Chennai, India in

association with Institute Jean Lamour, University

of Lorraine, Nancy, France.

19 Effect of fiber content on Mechanical properties of Glass

fiber reinforced polymer (GFRP) Composites

J. Ronald Aseer, K. Deka,

S.Kumar, S. Muralidharan, A.

Sharma

In the proceeding of International

Conference on Recent Trends in Mechanical,

Material Science, Manufacturing, Automobile,

Aerospace Engineering and Applied Physics

(AMAEAP-2016), 30 April Jawaharlal Nehru

University, New Delhi, India

20 X-Ray Diffraction Analysis of Mechanically Milled Alumina

and Zirconia powders, Advanced Science letters,

J. Ronald Aseer, S. Renold Elsen,

K. Jegadeesan

American Scientific Publishers, ISSN: 1936-6612,

2017(Accepted) Yes

21 Taguchi Based Analysis on Hole Diameter Accuracy of

Drilled Glass/Bahunia Racemosa Fiber Polymer

Composites,

J. Ronald Aseer, P. Sethupathi,

Chandradass J, S. Elsen

In the proceeding of International Conference on

Advances in Design, Materials, Manufacturing

and Surface Engineering for Mobility, SAE

Internationals, Warrendale, Pennsylvania

(Accepted)

5

Continue…..S.No. Title Authors Conference/Journal name

(with vol, page and year)

Scopus

index

(yes/No)

22 Influence of PC-GTAW Parameters on Micro structural and

Mechanical Properties of Thin AISI 1008 Steel Joints

Ravindra Kumar, Ramkishor

Anant, P. K. Ghosh, Ankit Kumar

and B. P. Agrawal

Journal of Materials Engineering and Performance,

Springerlink, 25(9), 2016, pp. 3756-3765 Yes

23 Comparative study of ventilated disc brake with different

profiles for heat dissipation

B. P. Agrawal, P. K. Choudhary

and Dippin Singh Rajora

International Journal of Trends in Research and

Development, 3(5), 2016, pp. 122-125No

24 Effects of Cutting Parameters on Quality of Surface

Produced by Machining of Titanium Alloy and their

Optimization

Niharika, B. P. Agrawal, Iqbal

Ahmed Khan and Zahid A. Khan

Archive of Mechanical Engineering, De Gruyter, 63(4),

2016, pp. 531-548 Yes

25 Influence of PC-GTAW Parameters on Micro structural and

Mechanical Properties of Thin AISI 1008 Steel Joints

Ravindra Kumar, Ramkishor

Anant, P. K. Ghosh, Ankit Kumar

and B. P. Agrawal

Journal of Materials Engineering and Performance,

Springerlink, 25(9), 2016, pp. 3756-3765 Yes

26 Characteristics of Extra Narrow Gap Pulse Current Gas

Metal Arc Weld of HSLA Steel Produced by Single Seam per

Layer Deposition Technique

B. P. Agrawal and P. K. Ghosh Journal of Materials Engineering and Performance,

26(3), 2017, 1365-1381. -

27 Review Paper on Rail Track Flaw Detection using Matlab Eshu Sharma, Swet Chandan International journal for technological Research in

engineering, vol.38 April 2016No

28 Geometrical nonlinearity of 14-node brick finite element Swet Chandan, Alok

PS Chauhan

American Inst. of Physics

Vol 1802, Issue-1, 2017No

29 Sensor Based Color Identification Robot For Type Casting Toufeeq Ahmad,

S.Chandan

International Journal of Engineering Research and

Technology

ISSN 0974-3154 Volume 9, Number 1 (2016), pp. 83-88

No

6

Continue…..

S.No. Title Authors Conference/Journal name (with vol, page and year)

Scopus index (yes/No)

30 Comparative study of ventilated disc brake with differentprofiles for heat dissipation

B. P. Agrawal, P. K.Choudhary and DippinSingh Rajora

International Journal of Trends in Research andDevelopment, 3(5), 2016, pp. 122-125 No

31 Design, Analysis and Optimization of aRunner Blade in Small Bulb Turbine

Mahesh and KumarSambhav

Journal of Basic and Applied Engineering Research,p-ISSN: 2350-0077; e-ISSN: 2350-0255; Volume 3,Issue 5; April-June, 2016, pp. 466-467

32 Shape Optimization of Roller FollowerMechanism for ImprovingMechanical Efficiency

Sahil Sharma, Mahesh andKumar Sambhav

Journal of Material Science and MechanicalEngineering (JMSME)p-ISSN: 2393-9095; e-ISSN: 2393-9109; Volume 3,Issue 5; April-June, 2016 pp. 358-361

33 Pneumatically designed circuit to cover metro platformgap

Gautam Varshneya, KumarSambhav

International Journal of Scientific Development andResearch (IJSDR) www.ijsdr.org, ISSN: 2455-2631,April 2016 IJSDR | Volume 1, Issue 4 pp. 375-377

34 Recent Developments in the Processing and Testing ofNanocomposites: A Review

T R Vijayaram and KumarSambhav

National Conference on Emerging Trends in AppliedSciences, September 23-24, 2016, GalgotiasUniversity, Greater Noida

35 Development of automatic hand brake system for vehicle Mayank Raj*,HimanshuPanjiar

ICRAMMCE-2017, (Abstract accepted)Yes

36 Experimental study of the effect of input parameters onheat pipe heat exchanger thermal performance

SurajitChoudhurya,*, PramodKumara, P. Raveendiranb,HimanshuPanjiara

ICRAMMCE-2017, (Abstract accepted)Yes

7

Continue…..

S.No. Title Authors Conference/Journal name

(with vol, page and year)

Scopus index

(yes/No)

37 Estimation of Flyer Velocity for Titan 12 (Grade 1)

Plates by Pin Contact Velocity Measurement Method

P.Tamilchelvan1,

K.Raghukandan2,

K.Hokamoto3,

N.Meikandan4,

P.Manikandan5

,S.Saravanan6

3RD International conference on Recent

Developments in Science, Engineering and

Technology

October 21-22,

Vol.1, PP 82, 2016

Conference.

38 Parameter design for optimum percentage yield for

bio-diesel from cottonseed

Balendra Singh, Sailender

Nath Tiwari, Tarun Pratap

Singh, P. K. Chaudhary

International Research Journal of Engineering and

Technology, 3 (9), 2016 No

39 Experimental Investigation of performance and

emission characteristics of palm oil

P. K.

Chaudhary,A.Pal,S.N.Tiwar

i

International Research Journal of Engineering and

Technology, 3 (9), 2016 No

40 Challenges in Application of Pulse Current Gas Metal

Arc Welding Process for Preparation of Weld Joint

with Superior Quality

B. P. Agrawal and Rajeev

Kumar

International Journal of Engineering Research and

Technology, 5(1), 2016, pp. 319-327 --

41 Influence of PC-GTAW Parameters on Micro structural

and Mechanical Properties of Thin AISI 1008 Steel Joints

Ravindra Kumar, Ankit

Kumar, B. P. Agrawal and

P.K. Ghosh

Journal of Materials Engineering and Performance,

Springerlink, Accepted, 2016

42 Influence of Process Parameters on Machining Al-SiC-

Gr Hybrid Composites.

P.Mathiyalagan, P.Suresh Journal of Material Science and Mechanical

Engineering, Volume 3, Issue 3, 2016, pp. 192-196.--

8

Continue…..

S.No. Title Authors Conference/Journal name

(with vol, page and year)

Scopus index

(yes/No)

43 Performance Measurement of Service Sectors with a

Special Reference to Health Care Industries using ISM,

TOPSIS & Fuzzy TOPSIS

P.Mathiyalagan, P.

Parthiban.,& K

TamilMannan.,

International Conference on Developments in

Science, Management and Engineering (ICDSME

2016), Organized by International Organization of

Scientific Research and Development, 15 & 16

.04.2016, Tiruchirapalli.

Conference

44 Performance Measurement of Service Sectors with a

Special Reference to Health Care Industries using ANP

& Fuzzy ANP

P.Mathiyalagan, P.

Parthiban.,& K

TamilMannan.,

Proceedings of Advances in Mechanical

Engineering (NCAME 2016) Organized By

Department of Mechanical Engineering, SRM

University, Kattankulathur, Tamilnadu on

April29,2016.

Conference

45 Multi-objective Optimization of Performance

Characteristics in Machining of Al/SiC/Gr Hybrid

Composites using Grey Relational Analysis

P.Mathiyalagan, P.

Parthiban.,& K

TamilMannan.

Proceedings of Advances in Mechanical

Engineering (NCAME 2016) Organized By

Department of Mechanical Engineering, SRM

University, Kattankulathur, Tamilnadu on

April29,2016.

Conference

46 Shape Optimization of Roller Follower Mechanism for

Improving Mechanical Efficiency

Sahil Sharma, Mahesh,

Dr.Kumar Sambhav

Journal on Material Science and Mechanical

Engineering (JMSME), Volume 3, Issue 5, April-

June, 2016, pp. 358-361

--

p-ISSN:2393-

9095,

9

Continue…..S.No. Title Authors Conference/Journal name

(with vol, page and year)

Scopus index

(yes/No)

47 Design, analysis and optimization the runner blades of a

mini hydraulic bulb-turbine

Mahesh Nadda,

Dr. Kumar Sambhav

International Conference on “Recent Trends in

Mechanical, Material Science, Manufacturing,

Automobile, Aerospace Engineering and Applied

Physics” (AMAEAP-2016)

Conference

p-ISSN:2393-

9095

48 Design, analysis and optimization the runner blades of a

mini hydraulic bulb-turbine

Mahesh Nadda,

Dr. Kumar Sambhav

Journal on Material Science and Mechanical

Engineering (JMSME), Volume 3, Issue 5, April-June,

2016, pp. 358-361

--

p-ISSN:2393-

9095,

49 Impact of the course on Universal Human Values and

Ethics on the students of Galgotias University

Dr. Kumar Sambhav International Conference on Human Values in Higher

Education, Atmiya Group of Institutions, Rajkot,

Gujarat, 8-10 January, 2016

Conference

50 Static analysis, modal analysis and design modification in

chassis frame to optimize weight by using composite

material

Archit Tomar, & Dheer Singh Journal: (IJME) ISSN (P): 2319-2240 Vol. 5, Issue 1, Pag

99-106, Dec -Jan 2016,

Naas

Rating:2.02

Impact factor

(JCC):3.6

51 Modeling and analysis of chassis frame by using carbon

fiber and E-glass Epoxy as composite material: A

comparative study

Archit Tomar, & Dheer Singh Journal: IRJET journals’ ISSN: 2395 - 0056 Vol. 3, Issue

4, April 2016 --

52 Effect of Filler Content on Thermal Properties of Municipal

Solid Waste and Bahunia Racemosa Fiber Composites

J. Ronald Aseer Journal of Basic and Applied Engineering Research

(JBAER), 2016.

53 Effect of fiber content on Mechanical properties of Glass

fiber reinforced polymer (GFRP) Composites

J. Ronald Aseer, K. Deka,

S.Kumar, S. Muralidharan,

A. Sharma

International journal of Materials Science and

Mechanical Engineering (JMSME), Vol 3(3), 239-242,

2016Yes

10

Continue…..

S.No. Title Authors Conference/Journal name

(with vol, page and year)

Scopus index

(yes/No)

54 Effect of fiber content on Mechanical properties of

Glass fiber reinforced polymer (GFRP) Composites

J. Ronald Aseer, K. Deka,

S.Kumar, S. Muralidharan,

A. Sharma

In the proceeding of International

Conference on Recent Trends in Mechanical,

Material Science, Manufacturing, Automobile,

Aerospace Engineering and Applied

Physics” (AMAEAP-2016), 30 April Jawaharlal

Nehru University, New Delhi, India

Conference

55 Characteristics Study of Mechanical Milled Alumina

and Zirconia powders by X Ray Diffraction

J. Ronald Aseer, S. R.

Elsen, K. Jagadeesan

In the proceeding of International Conference on

Nanoscience and Nanotechnology for Energy

Applications (EApp-2016), 27–29 June,

Sathyabama University, Chennai, India

Conference

56 Effect of Fiber Content on Thermal Properties of

Municipal Solid Waste and Bahunia Racemosa Fiber

Composites,

J. Ronald Aseer International Conference on Recent Trends in

Mechanical, Material, Industrial, Automotive,

Aeronautical and Nano-Technology (MIANT-2016),

01 October, Jawaharlal Nehru University, New

Delhi.

Conference

57 Thermal and Die Electric Properties of Chemically

Modified Municipal Solid Waste and Banana Fiber

Composites

J. Ronald Aseer Environmental Progress and Sustainable Energy,

DOI 10.1002/ep.12498, Wiley publishers. (2016) -

11

12

S.No

.

Title Authors Publishers with full reference Date &

Year

1 Morphological and Dynamic

Mechanical Properties of Chemically

Treated Bauhinia Racemosa/Glass

Fiber Polymer Composites

J. Ronald Aseer, K.

Sankaranarayasam

y, P. Jeyabalan,

Priya K. Dasan

In special issue on Biopolymers and

Biomaterials, Apple academic

press.(Accepted)

2016

2 A Review of the Human Resource

Management Practices to Reduce

Employee Turnover in Different

Countries and Job Sectors

Rewa Smriti,

Kumar Sambhav,

Bhuvaneshwari S

Innovation, Technology and

Development: A Road Map for

Achieving Global Competitiveness,

Publisher: Bharti Publications; 1st,

New edition (2017) ISBN-

10: 8193317289, ISBN-13: 978-

8193317280

2017

Book/Articles/Chapters Publication by faculty members

13

Conference/Workshop/FDPs/seminar Organised

S.No. Title Resource Persons Date Organized Faculty/division

1 Universal Human Values and Ethics Dr. Kumar Sambhav July 4-8, 2016 Faculty of Galgotias University

2 Seminar on Career Counselling and Career Prospectives

after Engineering

Engineers Institute of India 5th Aug, 2016 School of Mechanical Engineering

3 Academic Processes and Practices at Galgotias

University

Dr.P. Mathiyalagan, Professor,

Galgotias University

06.10.2016 School of Mechanical Engineering

4 Process Equipment Design and Economics Mr.Neeraj Rupauliha

Mr.Anuj Jain

Mr.Ugrasen Yadav, Mr. Neeraj

Agarwal,

22nd Oct, 5th

Nov, 12th Nov,

19th Nov and

26th Nov , 2016

Dr.Anamika Paul, Professor, Organized by

School of Mechanical and Chemical

Engineering, Department of Chemical

Engineering , Galgotias University

5 Rubrics for Assessment of Major Project, Course

Outcome of Laboratory Courses and Internship

Dr.M.Rajmohan, Professor,

Anna University, Chennai,

Tamilnadu

Dr.P.Mathiyalagan, Professor,

Galgotias University

18.11.2016 Dr.P.Mathiyalagan / Dr.Satya Narayan

Satapathy, Professor, Galgotias University,

School of Mechanical Engineering

6 Universal Human Values and Ethics Dr. Kumar Sambhav December 5-17,

2016

Faculty of Galgotias University

7 Workshop on “3-D Printing & CNC Machine” Mr. Ranu Mishra, CETPA 23rd March 2017 Dr. Kumar Sambhav, School of Mechanical

Engineering

8 Live session on the academic processes fulfilling all

requirements of accreditation including the course file

preparation at Galgotias University

Dr.P. Mathiyalagan, Professor,

Galgotias University

05/04/2017 School of Mechanical Engineering

14

GU Faculty as resource person outside GU

S.No. Title Resource Persons Date Organized Faculty/division

1 Universal Human Values and Ethics Dr. Kumar Sambhav June 22-29,

2016

Faculty of Dr. APJ Abdul Kalam

Technical University, Lucknow

2 Universal Human Values and Ethics Dr. Kumar Sambhav July 27-31,

2016

B.Tech. Students of IIT Patna

3 Understanding the Human Being Dr. Kumar Sambhav September 2-

4, 8-9, 2016

Students of International Resource

Center for Human Values in

Education, Punjab Technical University

4 International Conference On Recent

Advances in Mathematical Sciences

and its Applications

Partially funded by:

Sciences and

Engineering Research

Board (SERB)

Department of Science

and Technology,

Government of India

December 08-

10, 2016

Jaypee Institute, Noida

5 A Refresher Course on Universal Human

Values and Ethics

Dr. Kumar Sambhav December 26,

2016- January

1, 2017

Faculty of Dr. APJ Abdul Kalam

Technical University, Lucknow

15

16

Conference/Workshop/FDPs/seminar attended

S.No Event name Date and year Event organized by Faculty

members who

attended the

event from GU

1 3rd World Summit on Accreditation (WOSA

2016)

18th- 20th March,

2016

National Board of AccredetationP K S Nain

2 National Conference on “Reforming &

Rejuvenating Indian Higher Education – A

Stakeholders’ Perspective”

18th May, 2016

EPSI (Education Promotion Society of India), P K S Nain

Anamika Paul

3 Workshop on Nano materials for Energy and

Environment, 13-18 June 2016.

National Institute of Technology,

Tiruchirappalli, India,

Dr.J.Ronald Aseer

4 Academic processes and Practices at Galgotias

University06.10.2016

Organized by School of Mechanical and

Chemical Engineering

16 SOME Faculty

members

5 Rubrics for Assessment of Major Project, Course

Outcome of Laboratory Courses and Internship 18.11.2016

Organized by School of Mechanical and

Chemical Engineering, Department of

Mechanical, Galgotias University

34 SOME Faculty

members

6 Process Equipment Design and Economics 22nd Oct,5th

Nov,12th

Nov,19th Nov and

26th Nov ,2106

Organized by School of Mechanical and

Chemical Engineering, Department of

Chemical Engineering , Galgotias University

17 SOME Faculty

members

7 Workshop on “Universal Human Values and

Ethics”

5-16 December,

2016

Galgotias University Mr.Himanshu

Panjiar17

• NPTEL VIDEO/ visual video presentation

• Research Based Learning-RBL (PG-13, UG-2)

• Industry Expert FDP (20 Hrs) & Student workshop on contentbeyond syllabus

• Project Based Learning -PBL (in process)

• Slow Learner support

• Tie up with CAD CIM Tech USA (TIET) for skill based coursesin Emerging technologies.

18

19

S.No Name of faculty/ students Division(faculty)/

branch(students)

Awarded by Date

1 Professor Dr T R Vijayaram SOME, School of

Mechanical

Engineering / Director

(Research)

Distinguished Scientist Award in Metallurgical and Materials Engineering for the Year 2016 3/12/2016

2 Dheer Singh with Archit Tomar Design and Mechatronics (SOME)

Best Paper Certificate In International journal of Mechanical Engineering(IJME) Naas Rating:2.02 for “Static analysis, modal analysis and design modification in chassis frame to optimize weight by using composite material” (IJME) ISSN (P): 2319-2240 Vol. 5, Issue 1, Dec -Jan 2016, 99-106

31/01/2016

3 Professor Dr T R Vijayaram SOME, School of Mechanical Engineering / Director (Research)

FIE, Fellow of The Institution of Engineers, Kolkata India.FIE Number is F-1226602

29/05/2017

20

21

22

S.No. Name of The Company

1 Indian Navy

2 Bygging India Ltd.

3 Infosys

4 Wipro

5 Cognizant

6 Tech Mahindra

7 Zycus

8 Vivo Mobile Pvt. Ltd.

9 Complete Automation

10 Nigania Steels (P) Ltd.

11 Innovaccer

12 Arabol Lubricants

13 Libra Automobiles Ltd.

14 M.R. Hyundai

15 Appamplify

16 SKH Metals Ltd.

S.No. Name of The Company

17 Vinayak Packaging

18 Super Auto

19 Champ Info Software

20 3Dexter Education

21 Multiplier Solutions

22 Japan Third Party Co. Ltd.

23 Pioneer-e-Solutions Pvt. Ltd.

24 Lafarge India Ltd.

25 R.K. Associates

26 Concept Group

27 FACE

28 Lutron GL Sales and Services Pvt. Ltd

29 Perfect Generators

30 Research Nester

31 Cvent India

32 Adroit Control Engineers

33 Mahindra & Mahindra Ltd.

S.No. Student Name Branch Company Name

1 Arpit Singh ME3Dexter Education Pvt.

Ltd.

2 Ishwar Chandra Jha ME3Dexter Education Pvt.

Ltd.

3 Shubham Kaushik ME Arabol Lubricants

4 Parimal Vikrant ME Champ Info Software

5 Vinit Kumar ME Champ Info Software

6 Anand Mohan Singh ME Cognizant

7 Namit Kumar Yadav ME Cognizant

8 Pankaj Singh ME Cognizant

9 Swapnil Khastagir ME Cognizant

10 Achal Kumar Singh ME Infosys

11 Anand Mohan Singh ME Infosys

12 Ashish Negi ME Infosys

13 Bijoy Krishna Banik ME Infosys

14 Junaid Zia ME Infosys

15 Kovid Asthana ME Infosys 23

S.No. Student Name Branch Company Name

16 Namit Kumar Yadav ME Infosys

17 Nikhil Kumar Bansal ME Infosys

18 Nikhil Mishra ME Infosys

19 Pranshul Kulshrestha ME Infosys

20 Safiul Sk ME Infosys

21 Sarvesh Kumar Sharma ME Infosys

22 Shashank Singh ME Infosys

23 Shubham Kaushik ME Infosys

24 Swapnil Khastagir ME Infosys

25 Naveen Gill ME Koncept Group

26 Shubham Sharma ME Libra Automobiles Ltd.

27 Animesh Kashyap ME M.R. Hyundai

28 Mrinal Yadav ME M.R. Hyundai

29 Santosh Kumar Panigrahy ME M.R. Hyundai

30 Yash Sapra ME M.R. Hyundai

24

S.No. Student Name Branch Company Name

31 Shubham Sharma MEMahindra & Mahindra

Ltd.

32 Sandeep Kr. Kaushik ME Nigania Steels (P) Ltd.

33 Diwanshu Yadav MEPerfect Generators

34 Imran Khan MEPerfect Generators

35 Shubham Tiwari MEPioneer e-solution Pvt.

Ltd.

36 Tanuj Yadav MEPioneer e-solution Pvt.

Ltd.

37 Pulkit Trivedi MER.K. Associates

38 Ankur Verma ME Research Nester

39 Bhavesh Gawde ME Research Nester

40 Imran Khan ME Research Nester

41 Gaurav Kumar ME SKH Metals Ltd.

42 Maaz Ali Khan ME Super Auto

43 Apoorav Singh ME Tech Mahindra

44 Prakhar Kumar ME Tech Mahindra

45 Vivek Kumar Yadav ME Tech Mahindra 25

S.No. Student Name Branch Company Name

46 Akash Singh ME Vinayak Packaging

47 Pankaj Singh ME VIVO Mobile Pvt.Ltd.

48 Surya Pratap Singh ME VIVO Mobile Pvt.Ltd.

49 Akash Dhawan ME Wipro Tech

50 Ishan Sharma ME Wipro Tech

51 Krishna Kumar Singh ME Wipro Tech

52 Yash Baliyan ME Wipro Tech

26

27

S. No Name of the Student Enrolment No.Organisation where Training

doneTopic

1 Abhilendu Kumar 1313101003 BHEL(Noida) PS-PEM(MPL,MSF)

2 Abhimanyu Bhandari 1313101237 BPCL(Mumbai) Mechanical pumps

3 Abhishek 1313101005 Honda Manufacturing Process

4 Abhishek Kumar 1313101006 HAL(Lucknow) Basics Of Aircraft

5 ABHISHEK KUMAR SUDHANSHU 1313101007 E18(Taglakabad) Maintainance of 8head

7 Achal Kumar Singh 1313101011KSFL

Nature & types of mechanical maintainance activities

8 Aditya Deb Roy 1313101014 BSL-SAIL Steel melting shop

9 AKASH DHAWAN 1313101019BTP pvt. Ltd

Injection Moulding & Quality Testing

10 AKASH TOMAR 1313101021BTP pvt. Ltd

Injection Moulding & Quality Testing

11 Akhil Paliwal 1313101022 Indian Railway Coal handling

12 Ankit Kumar 1313101028 HONDA

13 ANKIT KUMAR SRIVASTAVA 1313101029Delhi Metro

Air conditoning, Heat treatment

14 Ankit Pandey 1313101030 MNS Engg. Ltd. Fabrication

15 Ankur Verma 1313101032 Indian Railway Heat treatment shop

16 ANMOL S SAHNI 1313101034NPCIL(NAPS)

Turbine, Generator, Compressors

28

S. No Name of the Student Enrolment No.Organisation where Training

doneTopic

17 ANSHUL PRATAP SINGH 1313101035 Cadre Railway

18 Archit Kotwal 1313101041 Honda Cars Layout Improvement of B zone

19 Aseem Bhatnagar 1313101045 Railway CNC Machining

20 ASHISH NEGI 1313101047 KIE Engg. Ltd. Foundary & Machinery work

21 ASHUTOSH VERMA 1313101049 C & W Rilway CNC Machining

22 ASHWINI KUMAR 1313101050 Honda Manufacturing Process

23 BIJOY KRISHNA BANIK 1313101056 ONGC Drilling dept

24 Deepak Kumar 1313101058 IIT Delhi Study on Duel fuel engine

25 Deepak Sharma 1313101059 JBM(NAPL) Welding Technology

26 Deepanshu Goel 1313101060 Mahindra Clutch Plate

27 Deependra Bahadur Chaudhary 1313101062 Indian Railway Heat treatment shop

28 Devendra Pandey 1313101064 Hyundai Engine

29 Diwanshu Yadav 1313101066 ONGC Innovation in diesel engine

30 Gaurav Kumar Singh 1313101068 HONDA Manufacturing division

29

S. No Name of the Student Enrolment No.Organisation where Training

doneTopic

32 Gaurav Raj Sinha 1313101070 Hyundai(Dhanbad) Engine, Transmission

33 GAURAV SINGH 1313101071NPCIL(NAPS)

Turbine, Generator, Compressors

34 Himanshu Mishra 1313101074 BHEL(Haridwar) Steam Turbne

35 Imran Khan 1313101077 Indian Railway Heat treatment shop

36 ISHAN SHARMA 1313101078 Honda Cars Ltd. Vehicle Qualty

37 ISHWAR CHANDRA JHA 1313101079 Indian Railway Study of various pumps

39 Krishna Kumar Singh 1313101090 DLW(Varanasi) HWS, SAS, EES, LAS

41 Mani Pathak 1313101096 India brake Air Breaking division

42 Manjeet Kumar 1313101098 Honda Cars Ltd. Vehicle Qualty

43 MD Aadil Raza 1313101100 BCCL Engine Shop

45 Namit Kumar Yadav 1313101111Indian Railway

types of pumps in locomotive

46 NIKHIL KUMAR BANSAL 1313101113 Mahindra Clutch Plate

47 Nikhil Mishra 1313101114 TATA MOTORS Clutches

48 PANKAJ KUMAR 1313101117 NHPC Hydropower generator

30

S. No Name of the Student Enrolment No.Organisation where Training

doneTopic

50 Piyush Mishra 1313101124 Indian Railway Heat treatment shop

51 Pranshul Kulshreshta 1313101127 Rohan Motors Overview

52 Prince Chauhan 1313101129 Maruti Suzuki Clutch Plate

53 Pulkit Trivedi 1313101132 RTPP Overview

54 Rajat Gupta 1313101139 BHEL Steam turbine

55 Safiul S K 1313101154 BHEL Pneumatic Systems

56 SANDEEP KUMAR KAUSHIK 1313101157 Honda Manufacturing Process

57 Sandeep Kumar Singh 1313101158 Tata Steel study vessel tilt drive

58 Sanket Kumar Singh 1313101160 BCCL Overview of components

59 Sarvesh Kumar Sharma 1313101163 TATA MOTORS Compressors

60 Satyam Gupta 1313101164 BHEL Steam turbine

61 Shashank Singh 1313101170 Indian Railways Study of pumps in NDM-3

62 SHIVESH TRIPATHI 1313101173 UPSRTC Automotive engine

63 Shobhit Kumar 1313101174 BHEL Locomotives and Generators

31

S. No Name of the Student Enrolment No.Organisation where Training

doneTopic

64 Shubham Kaushik 1313101177 BOSCH Study diesel engine

65 Shubham Tiwari 1313101181 MEI Pvt. Ltd. Diecasting

66 Shubham Tyagi 1313101182 BOSCH Braking system

67 Somesh Pratap Singh 1313101186Indian Railways

Study of pumps used in locomotive

68 Sudhanshu Joshi 1313101188 BHEL Steam Turbine

69 SUNNY KUMAR 1313101194 Indian Railways Wheel Prepair Shop

70 Surya Pratap Singh 1313101196 NTPC Coal handling plant

71 Swapnil Khastagir 1313101197 TATA Motors Coolant system

72 Tanuj Yadav 1313101198NPCIL(NPSA)

Turbine, Generator, Compressors

73 VARUN MALIK 1313101204BTP pvt. Ltd

Injection Moulding & Quality Testing

74 Vikas Kumar Gupta 1313101205Indian Railways

Study of pumps used in locomotive

75 Vinayak Dev 1313101208 H-ONE Pvt. Ltd. Nut projection Welding

76 ABHISHEK KUMAR MAHATO 1313101224 DEEP HYUNDAI SERVICING AND REPAIRING

77 Abhishek Sharma 1313101009DLW VARANASI

HEAT TREATMENT AND MAINTAINANCE

32

S. No Name of the Student Enrolment No.Organisation where Training

doneTopic

78 Ahmad Salman 1313101017 DMRC STUDY OF METRO PROJECTS

79 Alok Kumar 1313101023 MAHINDRA RISE AUTOMATIC LIFTING OF CARS

80 Anand Mohan Singh 1313101026INDIAN RAILWAYS

MAKING AND TESTING OF RAIL WHEEL

81 ANIL SHARMA 1313101027 IFCA BOTRING MAINTAINANCE

82 Anup Kumar Singh 1313101036INDIAN RAILWAY

HEAT TREATMENT AND MACHINE SHOP

83 Apoorav Singh 1313101039MAHINDRA RISE

AUTOMATIC READY FOR DISPATCH SYSTEM

84 Aquib Irshad 1313101040 NTPC Thermal Power

85 Arjit Kumar Singh 1313101042 BHEL TURBINE PARTS

86 Arvind Chaudhary 1313101044 NTPC Turbines and Blades

87 Ashutosh Jha 1313101048 BOSCH PVT. LTD. BASICS OF AUTOMOBILE PARTS

88 Atul Sharma 1313101052 H-ONE INDIA NUT PROJECTION WELDING

89 Ayush Gupta 1313101053 MAHINDRA RISE LEARNING OF ENGINE PARTS

90 BAIJU KANT SINGH 1313101055 DLW VARANASI PIPE SHOP,HMS,HTS

91 Deepanshu Yadav 1313101061 DMW PATIALA CNC PROGRAMMING

33

S. No Name of the Student Enrolment No.Organisation where

Training doneTopic

92 Habib Ahmad Sidique 1313101072Batch-2 TATA MOTORS

VEHICLE QUALITY TESTING

93 Himanshu Raj 1313101075Batch-2 BHEL

STEAM TURBINE MANUFACTURING

94 HIMANSHU SHARMA 1313101076 Batch-2 INDIAN RAILWAY HEAVY MACHINING

95 Jayant Kumar 1313101080 Batch-2 DLW VARANASI HTS,HWS,TMS,EES

96 Jitendra Kumawat 1313101081 Batch-2 BEL GHAZIABAD BASICS OF

97 Kirti Kumar Aggarwal 1313101085Batch-2 EIL

ROTATING AND STATIC EQUIPMENT

98 Kishan Kumar Mahaseth 1313101086Batch-2 DEEP HYUNDAI

SERVICING AND REPAIRING

99 Kovid Asthana 1313101087Batch-2 YAMAHA MOTORS

STUDY OF DIRECT PASS RATIO

100 Krishna Kumar Roy 1313101089 Batch-2 HONDA MOTORS PRODUCTION

101 Kunal Rawat 1313101091 Batch-2 VIDEOCON MANUFACTURING

102 LAKSHAY PARASHAR 1313101093 Batch-2 TATA MOTORS QUALITY CHECKING

103 Lalit Nagar 1313101094Batch-2 HONDA CARS

ENGINE ASSEMBLY,TROLLEY

MEASUREMENT

104 Maaz Ali Khan 1313101095 Batch-2 ROSO RAILWAY TESTING DIRECTORATE

105 Manu Yadav 1313101099 Batch-2 BPCL PUMP AND COMPRESSOR

106 MD RIZWAN KHAN 1313101101 Batch-2 NTPC THERMAL POWER PLANT34

S. No Name of the Student Enrolment No.Organisation where

Training doneTopic

107 MOHIT 1313101103Batch-2 AMAR UDYOG

PRODUCTION

108 Mukul Prabhakar 1313101108 Batch-2 NTPC ASH HANDLING PLANT

109 Nagandar Kumar 1313101110 Batch-2 BHEL LOCOMOTIVE ENGINE

110 PRAKHAR KUMAR 1313101125 Batch-2 HEC ltd. FFP,HMBP,HMTP

111 Prakher Gupta 1313101126Batch-2 INDIAN RAILWAY

BASIC RAILWAY ENGINEERING

112 Priyambdev Gaurav Shukla 1313101131 Batch-2 YAMAHA MOTORS Assembly

113 RAJAT JASROTIA 1313101140Batch-2 YAMAHA MOTORS

REDUCE INLINE AND OFFLINE DEFECTS

114 Ram Chandra 1313101142 Batch-2 BHEL FABRICATION PLANT

115 RANJEET KUMAR 1201201057 Batch-2 BHEL STEAM TURBINE

116 RAUSHAN KUMAR 1313101145 Batch-2 NTPC TURBINE PARTS

117 Rishabh Dwivedi 1313101148 Batch-2 PYROTECH CNC METAL CUTTING

118 Rishabh Bajpai 1313101147 Batch-2 PRIYAGOLD MANUFACTURING PARTS

119 Sachin Kumar 1313101153 Batch-2 BHEL Turbine Manufacturing

120 Salman Mumtaz 1313101155 Batch-2 SRMCO MANUFACTURING

121 Sanjeev Kumar 1313101159 Batch-2 INDIAN RAILWAY DISTRIBUTIVE VALVE35

S. No Name of the Student Enrolment No.Organisation where

Training doneTopic

122 SANOJ 1313101161Batch-2 HONDA MOTORS

CAR PARTS MANUFACTURING

123 Shalendra Bhati 1313101168 Batch-2 NTPC Turbines and Blades

124 Shubham Kumar Rai 1313101179 Batch-2 NTPC THERMAL POWER PLANT

125 Shubham Vig 1313101183 Batch-2 HONDA, Greater Noida Vehicle Quality

126 SOURAB LONI 1313101187Batch-2 IFCA BOTRING

MAINTAINANCE AND SERVICING

127 SUMER JANG 1313101192 Batch-2 NTPC THERMAL POWER PLANT

128 SUNIL KUMAR SUMAN 1201201234 Batch-2 NTPC THERMAL POWER PLANT

129 Suraj Kumar Tyagi 1313101195 Batch-2 NTPC THERMAL POWER PLANT

130 Tilak Bhatt 1313101201Batch-2 DEEP HYUNDAI

SERVICING AND REPAIRING

131 Upmanyu Vyas 1313101202Batch-2 INDIAN RAILWAY

PROPER MAINTAINANCE AND SERVICING

132 VIKRANT JAIN 1313101206Batch-2 YAMAHA MOTORS

ENGINE OIL LEAK ANALYSIS

133 Aamir Perwez 1313101001Batch-3 LG

COMMERCIAL AIR CONDITIONING

134 ADIL ASLAM 1313101012 Batch-3 Tata Steel Study of Belt, Ropes

135 Aditya Banibal 1313101013 Batch-3 JSW THERMAL WORKSHOP

136 ADITYA SOLANKI 1313101016 Batch-3 DLW ENGINE & BLOCKS36

S. No Name of the Student Enrolment No.Organisation where

Training doneTopic

137 Akash Singh 1313101020Batch-3 BHEL

LOCOMOTIVES & GENERATOR

138 Animesh Kashyap 1414101263Batch-3 NTPC,FARIDABAD

THERMAL & GAS POWER PLANT

139 Ankur Aman 1313101031 Batch-3 IPGCL,DELHI GAS TURBINE

140 Arpit Singh 1313101043 Batch-3 INDIAN RAILWAY WORKSHOP

141 Atul Kumar Mishra 1313101051 Batch-3 IPGCL,DELHI GAS TURBINE

142 AZAD SINGH 1313101054 Batch-3 UPPCL STEAM TURBINE

143 Bhavesh Gawde 1414101262 Batch-3 JAYPEE HYDRO POWERPLANT

144 Devender Singh Yadav 1313101063 Batch-3 AUTOSPORTS INDIA MANUFACTURINGATV

145 Dheerandra Pratap 1313101065Batch-3 MARUTI SUZUKI

WORKSHOP IN MARUTI SUZUKI

146 Gaurav Kumar 1414101264Batch-3 NTPC,FARIDABAD

THERMAL & GAS POWER PLANT

147 GAURAV KUMAR TRIPATHI 1313101069Batch-3 B.P.C.L

PUMP &COMPRESSOR SYSTEM

148 Harshit Mishra 1313102001Batch-3 INDIAN RAILWAY

DOOR NFRAMING,WELDING

149 JITENDRA SINGH 1313101082Batch-3 Yamaha motors

Machine shop,heat treatment shop etc

150 JUNAID ZIA 1313101084Batch-3 NTPC FARKKA

STUDY ON TPP , INTERLOCKS &

PURPUTION

151 KRANTIVESH PRATAP YADAV 1313101088 Batch-3 Honda Assembly 37

S. No Name of the Student Enrolment No.Organisation where Training

doneTopic

152 MANISH KUMAR 1313101097Batch-3 IndIAN RAILWAYS

WORKSHOP ON BODY AASEMBLY

153 MOHD AZAM 1414101259Batch-3 IFFCO WORKSHOP

154 MOHD NADEEM 1313101102Batch-3 INDIAN RAILWAY AIR BREAKING SYSTEM

155 Mohit Kumar Sharma 1313101105Batch-3 Yamaha motors

Machine shop,heat treatment shop etc

156 Mrinal Yadav 1414101261Batch-3 NTPC FARIDABAD

THERMAL & GAS POWER PLANT

157 Mukesh Kumar 1313101107Batch-3 BWEL MUZAFFARPUR

FOUNDARY SHOP,WELDING SHOP,MACHINE

SHOP,CARPENTRY SHOP

158 Naveen Gill 1313101112Batch-3 HP service Centre

159 Nitesh Kaushik 1313101115Batch-3 BATA INDIA LTD. MAINTENANCE DEPARTMENT

160 Nitish Kumar 1313101116Batch-3 TATA STEEL

ELIMINATING SENSING PROBLEM OF CHARGE SENSOR

161 Pankaj Singh

1313101118Batch-3 NBC PVT LTD.

BALL AND BEARING MANUFACTURING

162 Pankaj Singh 1313101119Batch-3 Mahindra Quality Assurance

163 Parimal Vikrant 1313101121Batch-3 HAL

CNC MACHINE

164 PRIYAM MISHRA 1313101130Batch-3 BHEL

MANUFACTURING OPERATIONS IN INSULATOR

PRODUCTION

165 Rahul Kumar Tiwari 1313101136Batch-3 BHEL

MANUFACTURING OPERATIONS IN INSULATOR

PRODUCTION

166 RAHUL SINGH 1313101137Batch-3 YAHAMA MOTORS

MACHINE SHOP,HEAT TREATMENT SHOP ETC. 38

S. No Name of the Student Enrolment No.Organisation where

Training doneTopic

167 RAJAN KUMAR 1313101138Batch-3 NTPC

STUDY OF THERMAAL POWER PLANT

168 Rajkishan Kumar 1313101141Batch-3 HONDA

OPERATION PROCESS SYSTEM

169 Raman Kumar Chaudhary 1313101143Batch-3 CLW

LOCOMOTIVE WORKSHOP

170 Saad Saleem 1313101151Batch-3 HEC

HEAT TREATMENT ,FORGING

171 Sandeep Gaun 1313101156Batch-3 NTPC

STUDY OF THERMAL POWER PLANT

172 Santosh Kumar Panigrahy 1313101162Batch-3 HYUNDAI

SEARCHING &REPAIRING

173 SATYENDRA SHUKLA 1313101165Batch-3 BWECL

Workshop

174 SAURABH KUMAR 1313101166Batch-3 NTPC,BRBCL

STUDY OF THERMAL POWER PLANT

175 SHIVAM SINGH 1313101171Batch-3 B.H.L&L&T

WORKSHOP

176 Shivangi Singh 1313101172Batch-3 NTPC DADRI

GAIL

177 Shourav Mohan Sinha 1313101175Batch-3 TATA STEEL

machine Shop

178 SHUBHAM JAIN 1313102006Batch-3 NTPC BADARPUR

BMD,PAM,TMD

179 SHUBHAM KUMAR 1313101178Batch-3 NTPC KAHALGAON

FUEL MANAGEMENT DEPARTMENT

180 Shubham Sharma 1313102007Batch-3 HRTC HAMIRPUR

AUTOMOBILE PARTS & ASSEMBLIES

181 Shuvam Kumar Singh 1313101185Batch-3 Menalli Seyaji

MANUFACTURING DEPARTMNT

39

S. No Name of the Student Enrolment No.Organisation where

Training doneTopic

182 Sufiyan Ahmad 1313101189Batch-3 NTPC

THERMAL POWER PLANT

183 Sujeet Kumar Pal 1313101190Batch-3 TATA MOTORS

E.M.S ,CLUTCH AND TRANSMISSION SYSTEM

184 Vinit Kumar 1313101209Batch-3 NTPC

STUDY OF THERMAL POWER PLANT

185 Vishal Kumar 1313101210Batch-3 HONDA

OPERATION PROCESS SYSTEM

186 Vivek Kumar Singh 1313101214Batch-3 NTPC

STUDY OF THERMAL POWER PLANT

187 Waqar Ahmad 1313101215Batch-3 LG

COMMERCIAL AIR CONDITIONING

188 Yash Sapra 1414101257Batch-3 NTPC,FARIDABAD

THERMAL & GAS POWER PLANT

189 YASHASVI PARASHAR 1313101217Batch-3 NTPC DADRI

FUEL MANAGEMENT DEPARTMENT

190 Nishant Kumar 1313102002Batch-1 BWEL

Manufacturing of railway wagon

191 Rishab Kansal 1313102004Batch-1 AAI

Different automobiles and mechnical equipments

192 SASIDHAR MURALIDHARAN 1313102005Batch-1 TANGEDCO Thermal power plant

193 Suyash Jain 1313102008Batch-1 BOSCH

Gasoline and vehicle diagnosis system and study

of various parts of car

194 Vikash Kumar 1313102009Batch-1 Jindal saw Ltd.

Production, quality, maintainence

195 Avesh Singh 1313105001Batch-1

RNG Motors, Kanpur.(Nissan)

Servicing and Maintenance

196 Gurtegh Singh Kalra 1313105002Batch-1 HP Batra Care Service and maintenance

40

S. No Name of the Student Enrolment No.Organisation where

Training doneTopic

197 Krishna Gupta 1313105003Batch-1 New Holland Fiat India Hydraulic Braking System

198 Manvendra Singh 1313105005Batch-1 HONDA Manufacturing Process

199 Nitish Kumar 1414105020Batch-1 NTPC

Thermal power and gas power

200 SURAJ KUMAR MISHRA 1414105022Batch-1 Deep Hyundai Servicing and Repairing

201 Vishal Anand Tiwari 1313105008Batch-1 DLW Varanasi.

HMS, HWS, PIPE SHOP and TMS

202 Vivek Kumar Yadav 1313105009Batch-1 SRM Motors, Lucknow. Servicing and Maintenance

203 Manish kumar Azad 1313105004 Batch-1Honda Cars India Limited Manufacturing Process

41

42