Recap: Bernoulli’s Principle

13
Recap: Bernoulli’s Principle pressure K.E. per unit volume (ρ = mass vol •Intuitively expect pressure in constriction region to be higher. Not True – Exact opposite ! Speed of liquid is greater in constriction which by Bernoulli’s equation indicates lower pressure. P 1 P 1 P 2 v 1 v 1 v 2 flow “The sum of pressure plus kinetic energy per unit volume of a flowing fluid is constant.” P + ½ρv 2 = constant Result: Relates pressure variations to changes in fluid speed . Example:

description

Recap: Bernoulli’s Principle . P 1. P 1. P 2. v 2. v 1. flow. v 1. “The sum of pressure plus kinetic energy per unit volume of a flowing fluid is constant .” P + ½ ρ v 2 = constant Result : Relates pressure variations to changes in fluid speed . Example:. mass vol. - PowerPoint PPT Presentation

Transcript of Recap: Bernoulli’s Principle

Page 1: Recap: Bernoulli’s Principle

Recap: Bernoulli’s Principle

pressure K.E. per unit volume (ρ = ) massvol

• Intuitively expect pressure in constriction region to be higher. Not True – Exact opposite !• Speed of liquid is greater in constriction which by Bernoulli’s equation indicates lower pressure.

P1P1

P2

v1 v1

v2flow

“The sum of pressure plus kinetic energy per unit volume of a flowing fluid is constant.”

P + ½ρv2 = constant

Result: Relates pressure variations to changes in fluid speed.Example:

Page 2: Recap: Bernoulli’s Principle

Thus: High pressure is not associated with high velocity. (Against intuition).

Example: Garden hose – a restriction causes velocity of water to increase but pressure at nozzle is less than further back in pipe where velocity of flow is lower.

(The large force exerted by water exiting hose is due to its velocity and not to pressure in pipe).

Bernoulli’s Principle and Flight• Bernoulli’s principle applies to an incompressible fluid (i.e. density ρ constant)

• However it can be extended qualitatively to help explain motion of air and other compressible fluids.

Shape /tilt of wing causes the air flow over wing to have higher speed than air flowing underneath it (greater distance).

wing

lift

Higher speed, therefore reduced pressure

Page 3: Recap: Bernoulli’s Principle

• Reduced pressure above the wing results in a net upward force due to pressure change called “lift”.

• A biker also has swollen jacket when going fast due to low external pressure!

• In aircraft design have shape of wing and “angle of attack” variations that effect total lift. (wind tunnel tests).

• Forward speed is therefore critical for aircraft lift. This can be affected by turbulence…

• If air flow over wing changes from laminar to turbulent flow the lift will be reduced significantly!

• In regions of strong wind shears lift can also be lost as flow reduces to zero!

Summary:• A reduction in pressure causes an increase in flow velocity (and vice versa).

(Demo: paper leaf)

Page 4: Recap: Bernoulli’s Principle

• What is temperature? - How can we compare one temperature with another? - Is there a difference between heat and temperature? - What does it mean to say something is hot or cold? - Ask yourself “How do they differ?”• How can we define “hot” or “cold”?• Senses – Touch: can be very misleading… - Pain felt when touching something that is very hot or

very cold can be difficult to distinguish! - Dissimilar objects (e.g. wood and metal) can feel

warmer or colder even though both are at room temperature!

• Temperature is really a comparative measurement to tell if an object is hotter or colder than something else.

Temperature and Heat (Chapter 10)

Page 5: Recap: Bernoulli’s Principle

• When two objects are in contact with each other for a long period of time, we say they are in thermal equilibrium.i.e. they both have the same temperature.

• This is the basis for temperature (comparative) measurements.

Thermometer

Thermal Equilibrium

• Invented by Galileo to indicate “degrees of hotness”.

• As captured air in bulb is heated or cooled it expanded or contracted and liquid level changed accordingly.

• Thermometers tell us whether something is hotter or colder on an internationally recognized reference scale.

• Thermometer use: - fluid (liquid, gas) expansion - electrical resistance change;

- changes in color…

scale

Thermoscope

captured air in bulb

liquid:water /wine?

Page 6: Recap: Bernoulli’s Principle

• Thermometers are based on reliable reference points such as freezing and boiling point of water. (Stable points as phase transition).

• Want the reference points to be far apart – with uniform scale in between.

Fahrenheit scale (G. Fahrenheit, 18th century)• He did not want to deal with negative values. So he set his “0” mark at the coldest temperature he could make in the laboratory (using mixture ice, water and salt).

• He set his upper reference to human body temperature and called it 96 º (for easy division by half, quarter etc.).

• This resulted in scale (still in use in U.S.A.) where freezing point of water = 32 ºF and boiling point = 212 ºF (at sea level).

• There are 180 ºF between these two common reference points.

Temperature Scales

Page 7: Recap: Bernoulli’s Principle

• He used freezing and boiling point of water for reference points and then divided the distance between them by 100 equal parts.

• Strangely, he set the temperature of freezing water to 100 º and boiling water to 0 º!

• Later revision (interchange) resulted in the centigrade scale with 100 degrees between reference points.

• Each Fahrenheit degree is therefore smaller than a centigrade degree:

180 ºF = 100 ºC or 9 ºF = 5 ºC or

Example: What is room temperature of 68 ºF in ºC? This is 36 ºF above freezing point of water (32 ºF).

36 ºF = x 36 ºC = 20 ºC

Celsius scale (A. Celsius, 18th century)

95

C5F1 9

5 C9FAs 1

Thus: 68 ºF = 20 ºC

Page 8: Recap: Bernoulli’s Principle

• i.e. multiplying Tc by tells us how many degrees Fahrenheit above freezing.

Example: At what temperature do the Celsius and Fahrenheit scales have the same value?

set Tf = Tc to determine value…

or Tf = Tc = -40 º (F or C)

Conversion Between ºF and ºC Tc = (Tf – 32)5

99

5

-40-40

0 32

20 68

100 212

ºC ºF

=> Tf = Tc + 3295

Tf = Tc + 3295

Tf = Tf + 3295

• So when the temperature gets close to -40 º it does not matter which scale to use!

• At higher and lower values they are quite different!

Page 9: Recap: Bernoulli’s Principle

• Choosing the freezing point of water to be 0 ºC is a convenient but arbitrary decision.

• Negative temperatures (ºC and ºF) are common in mountainous regions…

Absolute Zero Temperature

• Gas pressure decreases linearly with temperature.• Extension of these cooling lines for different gases all intersected at one temperature at zero pressure: -273.15 ºC.

• As negative pressure has no physical meaning, this indicates that temperature cannot fall below -273.15 ºC.

• The idea of an absolute zero temperature arose from observations of changes in gas pressure with temperature

• As gas cools it reduces in pressure until it liquefies /solidifies.

pressure

temperature (ºC)-300 -200 -100 2001000

different gases

liquid /solid

-273.15

Page 10: Recap: Bernoulli’s Principle

• The Kelvin (or absolute) scale has “0” at -273.15 ºC • For convenience it uses the same degree intervals as Celsius scale.

• To convert Celsius to Kelvin simply add 273.15

Tk = Tc + 273.15

• As Kelvin is an absolute scale, the comparative “degree” symbol is not used.

Example: 20 ºC = 293 K• Incredible range of temperatures in universe!

Kelvin Scales (after Lord Kelvin 19th century)

Page 11: Recap: Bernoulli’s Principle

0 K Absolute zero -273.15 ºC

4.25 Liquid He boils -268.9

20.4 Liquid H boils -253

77 Liquid N2 boils -196

90 Liquid O2 boils -183

194 CO2 (dry ice) freezes -79

273 Water freezes 0

310 Body temperature ~ 37

1336 Gold melts 1063

5773 Carbon arc 5500

6273 Sun’s photosphere 6000

6293 Iron Welding arc 6020

Temperature Ranges

Page 12: Recap: Bernoulli’s Principle
Page 13: Recap: Bernoulli’s Principle