R400 Series – Data Sheets - Trade Scales Sheets/Rinstrum-R400.pdf · R400 Series – Data Sheets...

5
R400-702-420 R400 Series – Data Sheets 100,000 d @ 0.25 μV/d Trade approved Australia, Europe and USA Built in RS232/RS485 IP65 ABS or stainless steel housing 16 x 350 ohm cells Ethernet and Profibus DP support Robust precise analogue output module The R400 series of indicators are designed with both the installer and operator in mind and cover a wide range of applications. They are engineered and built to last with reliability being foremost. The modular design allows for the installation to be commissioned with only the components required, saving on time and money. With upwards of nine (9) versions of firmware available the R400 indicator is an ideal for distributors dealers and distributors as it simplifies installer training and reducing stocking levels. Flexibility is the key with its award winning modular accessory design. Modules include: additional serial options, input/outputs, analogue outputs, external buttons, Ethernet, Alibi (Data Storage Device) and battery or AC option. Superior housings - two housing types are available: R420 (ABS) rated to IP65 R423 (stainless steel) rated to IP66 Both housings are designed with extra attention to detail to increase their reliability in the field, thereby reducing unplanned downtime and servicing costs. For example, the R423 uses a high impact polycarbonate lens to protect the LCD from knocks. Simple setup - use the menu system directly via the alpha numeric keypad or the configuration utility View400 on a PC. Operator friendly - large multi-segment display that uses logical prompts along with dedicated and programmable function keys. Printing can be tailored with custom record, docket or reports printouts. Primary display is 29mm (1.1”) and secondary display 18mm. Rugged Load Cell Input - Designed to take 16x320 ohm load cells; providing flexibility and reducing the need for summing hardware, simplifying the installation and saving money. The load cell input is protected with onboard transorbs to limit damage from external voltage surges. Networking Capability - Support for both Ethernet and Profibus DP to improve integration into larger control systems Modules The R400 Series flexibility is provided through its broad range of modules that are easy to configure and neatly connect into the rear of the indicator. There are 4 module slots where an indicator can be equipped with only the features required for a given installation. Robust Input/Output Modules (M4301, M4311, M4321, M4331) An R400 indicator can be equipped with up to 32 I/O. These I/O are electrically isolated, designed for direct connection into PLC’s and are capable of driving low voltage actuators directly. Isolated high side (400mA current source) drivers are capable of driving low voltage actuators directly or can be connected directly with PLC controllers. Each module has 8 digital I/O ports which are limited to maximum input voltage of 30V and can drive up to 400mA. Direct connection between I/O points is supported Inputs are isolated to resist against system noise.

Transcript of R400 Series – Data Sheets - Trade Scales Sheets/Rinstrum-R400.pdf · R400 Series – Data Sheets...

Page 1: R400 Series – Data Sheets - Trade Scales Sheets/Rinstrum-R400.pdf · R400 Series – Data Sheets ... multiple indicator weighing systems and process control. ... Programmable printing

R400-702-420

R400 Series – Data Sheets

� 100,000 d @ 0.25 μV/d

� Trade approved Australia,

Europe and USA

� Built in RS232/RS485

� IP65 ABS or stainless steel

housing

� 16 x 350 ohm cells

� Ethernet and Profibus DP

support

� Robust precise analogue

output module

The R400 series of indicators are designed with both the installer and operator in mind and cover a wide range of applications. They are engineered and built to last with reliability being foremost. The modular design allows for the installation to be commissioned with only the components required, saving on time and money. With upwards of nine (9) versions of firmware available the R400 indicator is an ideal for distributors dealers and distributors as it simplifies installer training and reducing stocking levels.

Flexibility is the key with its award winning modular accessory design. Modules include: additional serial options, input/outputs, analogue outputs, external buttons, Ethernet, Alibi (Data Storage Device) and battery or AC option.

Superior housings - two housing types are available:

� R420 (ABS) rated to IP65

� R423 (stainless steel) rated to IP66

Both housings are designed with extra attention to detail to increase their reliability in the field, thereby reducing unplanned downtime and servicing costs. For example, the R423 uses a high impact polycarbonate lens to protect the LCD from knocks.

Simple setup - use the menu system directly via the alpha numeric keypad or the configuration utility View400 on a PC.

Operator friendly - large multi-segment display that uses logical prompts along with dedicated and programmable function keys. Printing can be tailored with custom record, docket or reports printouts. Primary display is 29mm (1.1”) and secondary display 18mm.

Rugged Load Cell Input - Designed to take 16x320 ohm load cells; providing flexibility and reducing the need for summing hardware, simplifying the installation and saving money. The load cell input is protected with onboard transorbs to limit damage from external voltage surges.

Networking Capability - Support for both Ethernet and Profibus DP to improve integration into larger control systems

Modules The R400 Series flexibility is provided through its broad range of modules that are easy to configure and neatly connect into the rear of the indicator. There are 4 module slots where an indicator can be equipped with only the features required for a given installation.

Robust Input/Output Modules (M4301, M4311, M4321, M4331)

An R400 indicator can be equipped with up to 32 I/O. These I/O are electrically isolated, designed for direct connection into PLC’s and are capable of driving low voltage actuators directly.

� Isolated high side (400mA current source) drivers are capable of driving low voltage actuators directly or can be connected directly with PLC controllers.

� Each module has 8 digital I/O ports which are limited to maximum input voltage of 30V and can drive up to 400mA.

� Direct connection between I/O points is supported

� Inputs are isolated to resist against system noise.

Page 2: R400 Series – Data Sheets - Trade Scales Sheets/Rinstrum-R400.pdf · R400 Series – Data Sheets ... multiple indicator weighing systems and process control. ... Programmable printing

R400-702-420

Button Module (M4302) The Button Module provides 4 voltage free inputs for use with switches or thumbwheels. The voltage free inputs eliminate the need to wire up complicate input driver circuits.

Isolated Communication Modules

Communication modules are in addition the built in RS232/RS485 ports on the R400 indicators.

� Fully isolated and recommended for application where there is a risk of lightening or surges or where additional communication ports are required.

� M4201 RS232/RS232, M4202 RS232/RS485, M4203 RS485/RS485

Precise Robust Analogue Output Module (M4401)

The analogue module provides a 4-20mA or 0-10V analogue output and two digital I/O.

� Isolated so as to resist against system noise and interference therefore reducing unnecessary callouts;

� Precise with a 400Hz (2.5msec) update rate and 1/65,000 resolution. The fast update and high D to A conversion rate give a smooth output curve which helps a PLC to see more realistic readings (2.5msec step)

� Scalable to suit the input on the PLC.

� Two digital I/O provided the same as the M4301

Data Storage Device Module (M4501) The Data Storage Module provides non volatile alibi memory storage (6M bytes) according to WELMEC 7.2 L. Compatible with later versions of software.

Ethernet (M4221)

The Ethernet Module provides 10/100 Base TX with auto negotiation (1 Raw bi-directional port and 10 Raw transmit only ports).

Accessories Converter 0-10V/4-20mA Input (M4902)

Connects to the Load Cell Input on R400 series indicators for a voltage or current input. Useful where an indicator needs to take an input from load pins on a crane scale for example. Suitable for pressure, displacement or strain transducers that output 4-20mA or 0-10V analogue signals.

rin-LINK

The magnetically coupled rin-LINK on the front panel provides a convenient temporary connection to a laptop - no need to access rear of the indicator.

� Transfer of setup and calibration information

� Download of software upgrades

Relay Modules (M4901 and M4906)

The relay modules, used in conjunction with an I/O module, provide 8 voltage free relay outputs rated to 250VAC and 8A, available in either 12 or 24V.

� DIN rail mountable.

� Provides N/O (normally open) and N/C (normally closed) contacts for each output.

Smart Weighing Superior Diagnostics R400 series indicators have a range of diagnostic tools and features that aid system commissioning and maintenance. Hardware configuration report summarises how the indicator hardware is setup, providing a record for maintenance purposes or fault finding Force Output and Test Input functions allow the installer to specifically test I/O to assist in site setup Modules can be swapped in and out without recalibration of the indicator, saving time and effort Status LED on each I/O; Overload counter to review if the scale has been overloaded.

Page 3: R400 Series – Data Sheets - Trade Scales Sheets/Rinstrum-R400.pdf · R400 Series – Data Sheets ... multiple indicator weighing systems and process control. ... Programmable printing

R400-702-420

R400 Series – K401 – Data Sheet

� Counting with piece weight entry

� Custom unit switching

� Set pointing

� Reporting

� Custom printing

� PLC integration

The K401 is a general purpose indicator suitable for weigh bridges, general trade weighing, multiple indicator weighing systems and process control. The Scale Entry/Exist features make the K401 ideal for unmanned weigh bridges. Programmable printing for customized dockets and reports can support two separate printers

� Comprehensive print tokens allow for all instrument data to be printed in a variety of formats

� Custom print strings can be assigned to multiple instrument events, for example long and short press of a print key.

Custom Unit Switching allows for complete flexibility � programme for standard weight units (kg, lb, t etc) or � define alternative weighing units for your application (litres or force for

example) Flexible set point configuration for improved system integration. A set point can be individually configured to instrument status or weight target triggers. Each set point can be:

� independently configured for a given function � associated with a given output � configured for high or low logic � defined to use a given weight source – Gross, Net, Alternate Units or

Piece count The large multi-line display assists the operator by displaying current weight and total weight and product name.

Smart Weighing R400 Logic set points are based on the status of the inputs and the defined mask that is used to match IO1-IO24 for the logic set points.

� AND logic set point active when all inputs in mask are on.

� OR logic set point active when any inputs in mask are on.

� XOR logic set point active when only one input in mask is on.

For applications that require a combination of multiple conditions eg.

� An output that is only to be active when weight is above target and stable.

� Pass band: weigh is between two targets

..now that’s smart weighing.

Page 4: R400 Series – Data Sheets - Trade Scales Sheets/Rinstrum-R400.pdf · R400 Series – Data Sheets ... multiple indicator weighing systems and process control. ... Programmable printing

R400-702-420

R400 Series Specification Table

Resolution Up to 100,000 d, minimum of 0.25uV/d

Approvals

10,000 d @0.7uV/d NMI(S-463), OIML R76

III/III L NTEP 08-720

MID 2004/22/EC - WELMEC 2.1 & 7.2

FCC, CE, C-tick

Zero Cancellation +/- 2.0mV/V

Span Adjustment 0.1mV/V to 3.0mV/V

Excitation 7.4V for up to 16 x 350 or 32 x 700 ohm load cells (4-wire or 6-wire plus shield)

Maximum total load cell resistance: 1,000 ohms

A/D Type 24bit Sigma Delta with ±8,388,608 internal counts

Operating Environment Temperature: –10 to +50°C ambient (14 °F to 122 °F)

Humidity: <90% non-condensing

Display

LCD with 4 alpha-numeric displays and LED backlighting:

Primary display: 6 x 28.4mm (1.12") high digits with units and annunciators

2nd display: 9 x 17.6 mm (0.7") digits with units

3rd display: 8 x 6.1 mm (0.2") digits

4th display: 4 x 7.6 mm (0.3") digits

Setup and Calibration Full digital with visual prompting in plain messages

Digital Filter Sliding window average from 0.1 to 30.0 seconds

Zero Range Adjustable from +/- 2% to +/- 20% of full capacity

Standard Power Input 12 to 24VDC (15 VA max) - ON/OFF key with memory feature

Variants AC

AC power supply

Input: 110/240VAC 50/60Hz Output: 12VDC 15VA

Battery 2.5AH NiMH rechargeable battery pack

Charger Input: 110/240VAC 50/60Hz Output: 12VDC

Optical Data Communications Magnetically coupled infra-red communications

Conversion cables available for RS232 or USB

Correction 10 point linearity correction

Serial Outputs Serial 1A: RS-232 serial port for remote display, network or printer supports.

Serial 1B: RS485 transmit only for remote display

Transmission rate: 2400, 4800, 9600 or 19200 baud

Assignable Function Keys 3

Operating Modes Single Range, Dual Range and Dual Interval

Battery Backed Clock Calendar Battery life 10 years minimum

Application Software K401 K402 K404 K410 K411 K412

Functions

Custom printing, custom unit switching, counting,

manual hold, peak hold,

auto output totalising

Single pass weighing Two pass weighing Dedicated truck key

Custom printing Temporary Truck IDs

Preset Tare Specialised truck

dockets

1 Material 6 Material 20 Material Up to 10 Batching Stages

3 Speed Fill Fill, Dump & Pulse stages

Inflight & jogging correction, Negative batching

Batch suspend Timer (RTC) based multiple batching

Products/Recipes 1 250 250 Trucks 100 Recipes

Analogue Output * (M4401) 1 - 1 -

Set points 8

Additional Communications * Module: RS232/RS232 Module: RS232/RS485 Module: RS485/RS485

Button Input * 4 Buttons

Data Storage Device * (M4501) 1

Profibus-DP Used with Rinstrum 1400 Profibus-DP Module

Ethernet * (M4221) 1

Housing Options R420 R423 Case Materials ABS Stainless Steel

Packing Weights Indicator: 1kg (35 oz) Indicator: 1.2kg (42 oz) Environmental IP Rating (panel mounted or with rear boot) IP65 IP66

Page 5: R400 Series – Data Sheets - Trade Scales Sheets/Rinstrum-R400.pdf · R400 Series – Data Sheets ... multiple indicator weighing systems and process control. ... Programmable printing

R400-702-420

R420 Rear Boot for IP65 standalone unit R420 Brackets R423 Bracket

Rear Boot

Rear Boot with Desk Stand

Stainless Steel Wall Mounting M4003

Stainless Steel Post Mounting

M4004

Stainless Steel Desk/Wall/Post Mounting

ABS Panel Mount

[9.7in]246mm

[5.7in]144mm

[2.1in]54mm [4.8in]

121mm

[1.4in]35mm

ABS with Rear Boot

[5.3in]134mm

[5.1in]130mm

Stainless Steel Panel Mount

263mm10.4in

135.7mm5.3in

51mm

2.0in

4mm0.2in 27.5mm

1.1in141.2mm

5.6in

2mm0.1in

140.2mm

5.5in

Stainless Steel with Rear Housing and Stand

213.3mm

8.40in

267.1mm10.52in

323.3mm12.73in

130mm

5.12in

32mm1.26in

131.6mm5.18in

83.3mm

3.28in

213.3mm

8.40in

Specifications are subject to variation for improvement without notice. Illustrations are indications only and variation may be evident between products.

*Optional modules