Patterson-Kelley
-
Upload
hoangthien -
Category
Documents
-
view
213 -
download
0
Transcript of Patterson-Kelley
Raytheon Company Commercial Apparatus & Systems Div. Department F-9 Waltham 54, Massachusetts
Yes, I am interested in Raytheon's completely packaged microwave power generator systems for gas excitation, please send the following material: Π Complete specification sheet Q Reprints of noteworthy articles Q Comprehensive application
bibliography
Name
Address
— CÏÏy
Zone Stat»
NEW PRODUCTS
down to 0.005 gram. Both dials can be turned without arresting the balance, so that quick readings are obtained. Accuracy of the balance is said to be 0.01 gram.
The fine weighing dial has graduations of 0.02 gram from zero to one gram. The second dial for weight loading is graduated in one-gram increments from one to nine grams. Oscillations are oil damped for qtiick reading. The left side weighing pan is removable to aid in transferring materials from the balance. The Torsion Balance Co.
P-25
Extended scale indicator, Model Sl-60T, displays any physical parameter that can be expressed as a motion. The closed loop servo-type instrument drives a 50-in. tape scale marked from 0 to 1000 in 0.05-in. graduations. Five inches of scale are always exposed, with readability of 0.025% of scale. Schaevitz Engineering. P-26
Tape Programmed Process Chromatograph
New automatic process control gas chromatograph uses a motor driven
The shell of the P-K Type (IV) Lab Blender can be charged from either side by the quick removal of either of two dust- and watertight covers.
YOU GET THESE 3 DIFFERENT MIXING ACTIONS.. .
LIQUID-SOLIDS TYPE - To disperse and blend, uniformly, liquids of any viscosity with dry solids, just insert the wire cage liquid-feed bar assembly. Handles liquids from minute quantities up to 40% of total weight. Liquid is introduced through hollow shaft of bar. Even critical formulations blended In 5 to 10 minutes.
INTENSIFIER TYPE - To get intensive mixing of hard-to-blend dry solids, or to break up agglomerates, use wire cage bar assembly. Average blending time for dry formulations! 3 to 5 minutes.
FOR GENTLE PRECISION BLENDING — Simply remove wire cage bar. Unique blending action will not cause attrition or break down even the most delicate crystals. Average blending time: 3 to 5 minutes.
This new P-K Type (LV) Lab Blender owes its versatility to the design of the removable, spring-loaded liquid-feed bar assembly. Liquids and solids are prevented from entering the bearing housings by an exclusive, patented seal. Standard (LV) Lab Blenders are available in 8 and 16 quart capacities, in transparent Lucite or stainless steel. Interior of shell and stainless steel bar assembly can be cleaned, clinically, in minutes. Operates on 115 ν AC.
Units can be shipped from stock. For complete technical information and prices, write to PK's Chemical and Process Equipment Division, 1009 Hanson Street, East Stroudsburg, Pennsylvania. IOQ
Need Gas Excitation
for free-radical production, photochemistry or spectroscopy?
Circle No. 109 on Readers' Service Card
1 3 8 A · ANALYTICAL CHEMISTRY
RAYTHEON Electronics Excellence in
Patterson-Kelley All P-K Twin-Shell Blenders are patented
and the name registered Circle No. 102 on Readers' Service Card
with P-K's NEW (LV) LAB πιπππη