PANTA flexible flat cables (FFC) - flat copper conductors …15 2,0 20 x 135 Cu 150 μm Sn 2* (DIN...
Transcript of PANTA flexible flat cables (FFC) - flat copper conductors …15 2,0 20 x 135 Cu 150 μm Sn 2* (DIN...
|TABLE OF CONTENTS
TABLE OF CONTENTS
FLEXIBLE BOARDCONNECTIONS
FLEXIBLE MODULES
PRODUCT PORTFOLIO SUMIDA FLEXIBLE CONNECTIONS GMBH
FLEXIBLE FLATCABLES
PANTA FIX JUMPER
PANTA SMD PANTA FLL
PANTA FIX JUMPER
MCT – MATEABLE CONNECTION TECHNOLOGY
PANTA ZIF JUMPER
THT – THROUGH HOLE TECHNOLOGY
SMT – SURFACE MOUNT TECHNOLOGY
REFLOW
PANTA FIX CRIMP
HOTBAR
PANTA FFC PANTA MODULES
FIX JUMPER
PANTA FIX JUMPERS are highly flexible flat conductor connectors to circuit boards (PCBs). Solid
round conductors ensure a fast and safe assembly. The PANTA round-flat-round technology
combines both. The copper conductors are rolled flat to a defined geometry in the insulating area.
Ensuring the highest standards of vibration and bending resistance. The smooth notch-free transition
from round to flat guarantees fracture-safe connection points. The following materials can be used
for the insulation: Polyester, Nomex (Aramid), PEN (Polyethylenaphthalat) or Polyimide (Kapton).
TECHNOLOGY
CHARACTERISTICS
| 1PANTA FIX JUMPER
Through Hole Technology (THT)High vibration and bending resistanceReliable and fracture-safe connectionVery easy handlingImmediately ready for installationEconomizes working time and assembly costsMinimum space requiredWiring errors are avoidedChoice of various termination stylesAllows combination with male connectorsHigh-quality insulation materials (-40°C to +125°C)Different pitches within one jumper available (MIX)Short insulation lengths also available as wire jumpers(without the flat rolled copper section)
BENEFITS
Please do not hesitate to ask for our processing instructions for PANTA FIX Jumper.
1 | Transition
2 | optimized distribution
of stress
High vibration and bending resistanceSmooth notch-free transition from flat to roundFracture-safe connection pointCompensation of intrinsic vibrationsReduction of tension in the soldering areaAvoidance of vibration resonances
ORDER CODE
A 05 - N 051 - A -
Pitche.g.A=2,54 mmSee pitch code
Number ofpins
Insulation material e.g.P = PolyesterN = NomexE = PENK = Polyimide
Insulation lengthfrom 15-5000 mmSpecial lengthson request
Termination Stylee.g.A = identical endsAN = different(see chart, combinationson request)
Special designson request,drawing required
A
PIN 1
B
PIN 1
C
PIN 1
Z
PIN 1
G
PIN 1
F
PIN 1
E
PIN 1
D
PIN 1
H
PIN 1
J
PIN 1
K
PIN 1
L
PIN 1
A
N
PIN 1
| 2PANTA FIX JUMPER
FIX JUMPER
The respective termination styles can be chosen separately for each side and can also be combined with PANTA FLL-, PANTA FIX CRIMP and PANTA ZIF-terminations.
TERMINATION STYLES (D-L ) starting with 1 mm pitcstarting with 1 mm pitch
TECHNICAL DATA
Order Code
Pitch
Max. number of pins
Length
Min. margin
Pin diameter
American Wire Gauge
Flat conductor width
Flat conductor thickness
Conductor material
Current rating at 20°C
Voltage rating
Dielectric strength
U
0,8
32
0,3
0,254
30
0,5
80
0,5
100
200
2-3 μm tin-plated
15-5000
Cu acc. to DIN 40500; min. 1,5 μm tin-plated
E
1,00
32
0,3
0,32
28
0,7
80
1,0
200
700
G
1,25
32
0,3
0,32
28
0,75
90
1,5
200
700
B
1,27
32
0,3
0,32
28
0,75
90
1,5
200
700
L
1,90
32
0,3
0,40
26
1,35
110
2,0
200
1500
D
2,00
32
0,3
0,40
26
1,35
110
2,0
200
1500
F
2,50
32
0,3
0,51
24
1,5
110
3,5
300
1500
A
2,54
32
0,3
0,51
24
1,5
110
3,5
300
1500
Z
3,18
25
0,3
0,51
24
1,5
110
3,5
300
1500
P
3,5
23
0,3
0,51
24
1,5
110
3,5
300
1500
R
3,81
20
0,5
0,51
24
1,5
110
3,5
300
1500
C
5,08
16
0,5
0,51
24
1,5
110
3,5
300
1500
mm
mm
mm
mm
AWG
mm
μm
A
VDC
VDC/min
Insulation
With Pitch
American Wire Gauge
Insulation resistance(grd-sig-grd)
Operation temperature
Soldering temperature
Polyester
-40 ... +105 250/4
Nomex
-40 ... +125 260/5
2,54
24
10>10
PEN
-40 ... +125 260/5
Polyimide
-40 ... +125 260/5
mm
AWG
S
°C
°C/sec
D
A
B
C
G
D
A
B
C
G
G
| 3PANTA FIX JUMPER
FIX JUMPER
PANTA ZIF JUMPERS (FFC-Cable) are used for connecting printed circuit boards (PCBs)
Compatible with ZIF (Zero Insertion Force) or LIF (Low Insertion Force) connectors
Defined stripping of insulation and application of stiffener in the contact area provides secure
connection to all conventional connection systems (e.g. Iriso, FCI, Molex, Tyco, JST etc.)
Minimum dimensions through thin foils and small pitches
Fast assembly by simple insertion
High flexibility and bending resistance
Special versions available, e.g. LIF/ZIF pins can be combined with round solder pins
(PANTA FIX) or SMD solderable flat conductors (PANTA FLL)
Optional custom design of jumper mating area allows the use of specific connectors with
additiona l features. Specific punch at jumper ends provides a strain relief functionality and
connector position assurance (e.g. Iriso I-Lock or similar)
PRODUCT DESCRIPTION
ORDER CODE
ZIF - E 10 - P 100 - N -
Pitche.g.E=1,00 mmSee pitch code
Number of pins
Insulation materiale.g.P = PolyesterE = PENK = Polyimide
Insulation lengthfrom 20-5000 mmSpecial lengthson request
Termination Stylee.g.N = identical endsNW = different
Special designson request,drawing required
ZIF JUMPER
| 4PANTA ZIF JUMPER
| 5PANTA ZIF JUMPER
Low contact resistance
Increased number of mating cycles
Low current capability
Prevention of whisker effect for small centerlines
Connection with Au-plated connectors
BENEFITS OF THE GOLD PLATING
CHARACTERISTICS
Available pitches 0,5; 0,8; 1,0; 1,25 and 2,54 mm
Temperature range -40°C … 105°C
Copper wire can be chosen for a customer-specific coating with nickel and gold (conductor material Ni: e.g. min. 0.3 μm, conductor material AuCo: 0.1 μm))
Customer-specific application of isolation material
Custom manufacturing of surgical exploration and reinforcements
CD-Player
Printer
Laptop
LC-Displays
Car-Radio
Satellite Receiver
Telephone ...
FIELD OF APPLICATION
ZIF JUMPER
TECHNICAL DATA
* customer specials on request
H
D
E
N
A
G
B
W
K
DE
E
AN1 N2
G
BW
H H
K K
20-5000
3-5 (5)
6-10 (10)
Tin-plated Cu - optional Ni/AuCo
Polyester, PEN, Polyimide
Polyester
(number of pins + 1) x pitch
(number of pins - 1) x pitch
0,3
10>10
-40 ... +105
I
0,5
70
0,5
3-5(4)
6-10(8)
0,30 x 0,10/0,05
0,5
30
E
1,00
30
1,0
*0,70 x 0,10/0,05
1,0
200
G
1,25
26
1,25
0,80 x 0,10
1,5
200
A
2,54
24
3,0
300
ZIF JUMPER
Order code
Pitch
Max. number of pins
Insulation length
Length of stripped insulationNominal size (standard)
Length of reinforcementNominal (standard)
Conductor material
Wire material*
Insulation
Reinforcing insulation
Total width
Pitch width
Total thicknessof contact area
Insulation resistance(grd-sig-grd)
Current rating at 20°C
Voltage rating
Operating temperature
Margin 2,54
1,50 x 0,10
| 6PANTA ZIF JUMPER
Pitch: 0.93 mm
Bridge length: 11.2 mm
Total length: 15.2 mm
Number of pins: 4-25 of 0,93mm pitch
Packaging unit: 1500 pcs. on returnable reel
Special pitches and other pin counts on request
Customized SMD solutions available.
The PANTA SMD jumper has been designed to connect sandwiched PCBs or PCBs positionedat different angles. It offers the user a great variety of possible configurations designing electronic devices.
Applicable for reflow soldering processCompetitive connection technique as an alternative to rigid-flex or milled pcb-solutionsHigh temperature capabilityPlacement by SMD assembly machines (automated Pick & Place)Post bending of printed boards possible after panel separation up to 180°
PRODUCT DESCRIPTION
CHARACTERISTICS
2 | Possible post bending options after reflow
up to 180°
1 | Jumper placement for reflow process
| 7PANTA SMD
SMD
2 0,
1
4 0,
1
1,75 0,1
14,2 0,1
B 0,1
C 0,3
0,3
2,1
0,2
A
33,0
380
(350
)
Feeding direction
(13,0 dia)
ORDER CODE
SMD - 22 - 093 - K - 083 -
Pitch e.g. 0,93 mm
Number of pins
Insulation material
Insulation lengthe.g. 8,3 mm
Special designson request,
drawing required
TECHNICAL DATA
Pitch
Max. number of pins
Insulation material
Insulation restistance
Complanarity
Min. bending radius
Max. bending cycle
Conductor material
Current rating at 20°C
Resistance against soldering heat:
Recommended reflow profile
Operation temperature
0,93
4 - 25 pol
Polyimide insulation 25 μm + adhesive
8 10
0,15
2,0
20 x 135°
Cu 150 μm Sn
2* (DIN EN 60512-5-2)
IPC / JEDEC J-STD 020 D
DIN EN 61760
-40°C to +125°C
mm
S
mm
mm
A
°C
| 8PANTA SMD
K = Polyimide N = Nomex
SMD
Compatible with PANTA FIX with round solder pins
Compatible with PANTA ZIF connections
Special versions of insulation foil (punching of holes or trenches)
Insulation material (e.g. NOMEX) suitable for thermode soldering/hot bar soldering
Immediately ready for installation
High vibration and bending resistance
Suitable for SMT (e.g. thermode soldering / hot bar soldering)
High-quality insulation materials (-40°C to +125°C)
Minimum dimensions through thin foils and small pitches
Standard contact zone 2.5 mm
Short bridging lengths available
PRODUCT DESCRIPTION
CHARACTERISTICS
ORDER CODE
FLL - A 05 - N 051 - 001
Pitche.g.A=2,54 mmSee pitch code
Number ofpins
Insulation materiale.g.P = PolyesterN = NomexE = PENK = Polyimide
Insulation lengthfrom 15-999 mmSpecial lengths onrequest
SpecialDrawing required
| 9PANTA FLL
FLL
TECHNICAL DATA
Insulation
With pitch
American Wire Gauge
Insultion resistance(grd-sig-grd)
Operating temperature
Soldering temperature
Polyester
-40 ... +105 250/4
Nomex
-40 ... +125 260/5
0,5 - 2,54
24
10>10
PEN
-40 ... +125 260/5
Polyimide
-40 ... +125 260/5
mm
AWG
S
°C
°C/sec
Order code
Pitch
Max. number of pins
Length
Total width
Flat conductor width
Flat conductor thickness
Conductor material
Current rating at 20°C
Voltage rating
Dielectric strength
I
0,5
6-50
0,3
100
0,5
30
100
U
0,8
4-30
0,5
100
1,0
100
300
E
1,00
4-30
0,7
100
1,0
200
700
G
1,25
2-30
0,8
100
1,5
200
1100
B
1,27
2-30
0,8
100
1,5
200
1100
D
2,00
2-16
1,35
100
2,0
200
1500
F
2,50
2-16
1,5
127
3,0
300
1500
A
2,54
2-16
1,5
127
3,0
300
1500
12 - 999; special lengths up to 5000
Cu acc. to DIN 40500; min. 1.0 μm tin-plated
mm
mm
mm
mm
μm
A
VDC
VDC/min
D
A
B
G
A
D
B
G
| 10PANTA FLL
(number of pins +1) x pitch
FLL
PANTA Crimp with TYCO contacts
• TYCO pin contacts
- 88117-x (gold-plated or tin-plated) on request
- 88976-x (gold-plated or tin-plated) on request
• TYCO socket contacts
- 2-487406-4 (tin-plated) PREFERRED TYPE
- 487406-X (gold-plated or tin-plated) on request
• TYCO solder pin
- 88997-2 (tin-plated) on request
Diverse HOUSINGS are available on request.
PANTA Crimp with Nicomatic contacts• Nicomatic socket contacts series 14106
- 14106-12 (tin-plated) PREFERRED TYPE
- 14106-3210 (partially gold-plated) on request
• Nicomatic Rectangular terminal series 12410 • - 12410-12 (tin-plated) PREFERRED TYPE
- 12410-32 (partially gold-plated) on request Diverse HOUSINGS are available on request.
We will be pleased to advise you.
Solution to connect flat cable to round cable applications or header devices
Assembly of foil crimp contacts from different manufacturers (e.g. Tyco,
Nicomatic) with PANTA FIX JUMPER or PANTA FLEX cables
Available pitches: 1.27 and 2.54 mm
Secure connection (e.g. housings with locking mechanism and coding)
Mate / unmateable space-saving connection
Socket, pin and solder pin contact versions are available
Available with tin- or gold-plated surfaces.
PRODUCT DESCRIPTION
CHARATERISTICS
TYCO Female Terminal 2-487406-4
CRIMPFLEX® system patented by NICOMATIC
| 11PANTA FIX CRIMP
FIX CRIMP
ORDER CODE
CRP - A 05 - P 051 - 001
Pitche.g.A=2,54 mmSee pitch code
Number ofpins
Insulation materiale.g.P = PolyesterN = NomexE = PENK = Polyimide
Insulation lengthfrom 30-999 mmSpecial lengths on request
SpecialDrawing required
| 12PANTA FIX CRIMP
FIX CRIMP
TECHNICAL DATA
mm
mm
mm
mm
AWG
mm
μm
μm
A
VDC
VDC/min
Order code
Pitch
Compatible crimp contacts
Preferred type
Max. number of pins
Length
Min. margin
Pin diameter
American Wire Gauge
Flat conductor width
Flat conductor thickness
Conductor material
Current rating at 20°C
Voltage rating
Dielectric strength
B
1,27
Tyco
1-487547-1(gold-plated)
32
0,32
28
0,75
100
Cu acc. to DIN 40500;tin-plated, 2 μm
0,5
80
200
A
2,54
Tyco MQS
929387-1(tin-plated)
32
0,40
26
1,27
110
Cu acc. to DIN 40500;tin-plated 3 μm
2,0
300
1500
Tyco
2-487406-4(tin-plated)
20
0,40
26
1,27
110
2,0
Nicomatic
14106-12
(tin-plated)
32
0,51
24
1,5
120
3,0
30 - 999 in steps of 1; special length up to 5000
0,8
PANTA FIX POWER assembled with PANCON connectors
MASCON series, Type CEH
• Pitch 3.96 mm, high power
• Number of pins: 2-8
• IDC termination (insulation displacement contact)
• Wire gauge AWG 19
• Solid wires
• Built-in polarization
• Coding with coding pin
• Current rating 6.0 A
• Operating voltage acc. to VDE 0110-1/04.97
• Operating temperature -55°C to 105°C
MASCON series, Type CEP (terminating connector)
• Pitch 2.54mm
• Number of pins: 2-15
• IDC termination (insulation displacement contact)
• Wire gauge AWG 21
• Solid wires
• Coding with coding pin
• Current rating 4.0 A
• Operating voltage acc. to VDE 0110-1/04.97
• Operating temperature -55°C to 105°C
High vibration and bending resistance
Reliable and fracture-safe connection
Ready for installation
Economizes working time and assembly costs
High productivity by simultaneous soldering of all connection points in the solder bath
Up to 12 amperes (soldered power jumper)
PRODUCT DESCRIPTION
CHARACTERISTICS
PANTA FIX POWER | 13
FIX POWER
A
PIN 1
B
PIN 1
C
PIN 1
ORDER CODE
POW- A 0 5 - N 051 - A - 001
Pitche.g.A=2,54 mmSee pitch code
Number of pins
Insulation materiale.g.P = PolyesterN = NomexE = PENK = Polyimide
Insulation lengthfrom 15-999 mmSpecial lengthson request
Termination stylee.g.A = identical endsAB = different(see chart)
Special designson request,drawing required
TERMINATION STYLES
| 14PANTA FIX POWER
FIX POWER
TECHNICAL DATA
Order code
Pitch
Max. number of pins
Length
Max. margin
Min. margin
Pin diameter
American Wire Gauge
Flat conductor width
Flat conductor thickness
Conductor material
Current rating at 20°C
Voltage rating
Dielectric strength
PANTA FIX POWER JUMPER
F
2,5
15
1,0
0,72
21
2,0
8
A
2,54
15
1,0
0,72
21
2,0
8
P
3,5
8
1,0
0,91
19
3,2
12
N
3,96
8
1,0
0,91
19
3,2
12
M
5,0
8
1,0
0,91
19
3,2
12
C
5,08
8
1,0
0,91
19
3,2
12
K
7,0
8
1,0
0,91
19
3,2
12
J
7,5
8
1,0
0,91
19
3,2
12
25-999 in 0,1 steps; special lengths up to 5000
selectable up to 10
200
2-3 μm tin-plated
300
1500
mm
mm
mm
mm
mm
AWG
mm
μm
A
VDC
VDC/min
B
B
B
G
G
A
A
D
D
C
C
E2E1
| 15PANTA FIX POWER
FIX POWER
Insulation
With pitch
American Wire Gauge
Insulation resistance(grd-sig-grd)
Operation temperature
Soldering temperature
Polyester
-40 ... +105 250/4
Nomex
-40 ... +125 260/5
3,96
19
10>10
PEN
-40 ... +125 260/5
Polyimide
-40 ... +125 260/5
mm
AWG
S
°C
°C/sec
TECHNICAL DATA
Pitch
Max. number of pins
Length
Pin length
Termination styles
Min. margin
Pin diameter
American Wire Gauge
Flat conductor width
Flat conductor thickness
Conductor material
Current rating at 20°C
Voltage rating
Dielectric strength
Pitch
Max. number of pins
Type of connection
Wire gauge
Conductor type
Polarization
Coding
Current rating
Operation voltage
Operation temperature
PANTA FIX POWER SYSTEMwith insulation displacement connector (IDC)
The POWER Jumper The HIGH POWER Connector
2,54
2-15
1,0
0,72
21
4
25 - 999
2,5 - 10
A,B or C
2,0/3,2
200
tin-plated 2-3 μm
300
1500
3,96 HI-POWER
2-8
IDC
19
solid
integrated
by pins
6
VDE 0110 b / 2,79 Table 4
-55 to 105
3,96
2-8
1,0
0,912
19
6
mm
mm
mm
mm
mm
AWG
mm
μm
A
VDC
VDC/min
mm
AWG
A
°C
The POWER Jumper - Insulation materials
E
B
G
A
D
C
| 16PANTA FIX POWER
FIX POWER
Flexibility through flat copper conductorsHighly vibration resistantReliable and fracture-safe connection Minimum space requiredWeight reductionSuitable for signal and power distribution High thermal resistanceHigh chemical resistance (meets automotive requirements)Wiring errors are avoidedHydrolyse resistanceHighest flexibility Suitable for safety applications (e.g. air bags)Savings of cost and time during the process by simple and fast assembly
PANTA FFCs are flat copper conductors of various dimensions laminated with high-quality insulation foils. They combine minimum thickness with the precisely - defined, constant electrical values.
PRODUCT DESCRIPTION
We offer customized FFCs for automotive, industry and customer applications. Based on the customer requirements we develop specific solutions for all areas of applications.
High-quality insulation foils in various thicknesses
Flat copper conductor in thicknesses of 35�m and above
Customer selection of copper width
Use of ZZZIP® copper strip technology from Wieland
Assurance of very tight tolerances by advanced manufacturing technologies
Marking of the FFCs according to your specifications
Highly precise window technologies
Selective stripping of copper conductors by laser processing
Punching technology for exposure of terminations Matrix connections available
Assembly services (resistance welding, crimping, soldering, overmolding, potting)
On request, we can produce the whole assembly for you.
CHARACTERISTICS
BENEFITS
| 17PANTA FFC
FFC
ORDER CODE
FFC - A 05 - P 1500 - 001
Pitche.g.A=2,54 mmSee pitch code
Number ofpins
Insulation materiale.g.P = PolyesterN = NomexE = PENK = Polyimide
Insulation lengthselectable above 15 mm
SpecialDrawing required
A DB B
G
TECHNICAL DATA*
Order Code
Pitch
Max. number of pins
Length
Max. margin
Min. margin
American Wire Gauge
Special wire gauges
Conductor material
Current rating at 20°C
Voltage rating
Dielectric strength
E
1,00
0,3
30
-
1,0
200
700
G
1,25
0,3
30
-
1,5
200
700
B
1,27
0,3
28
30
1,5
200
700
D
2,00
0,3
26
24
2,0
200
1000
F
2,50
0,3
24
26
3,0
300
1500
A
2,54
0,3
24
26
3,0
300
1500
S
2,70
0,3
24
26
3,0
300
1500
Z
3,18
0,3
24
22
3,0
300
1500
P
3,50
0,3
24
22
3,0
300
1500
mm
mm
mm
mm
AWG
AWG
A
VDC
VDC/min
R
3,81
0,3
24
22
3,0
300
1500
N
3,96
0,3
24
22
3,0
300
1500
M
5,00
0,3
24
22
3,0
300
1500
C
5,08
0,3
24
22
3,5
300
1500
K
7,00
0,3
22
-
3,5
300
1500
J
7,50
0,3
22
-
3,5
300
1500
on request
selectable above 15 mm
selectable up to 10
Cu acc. to DIN 40500; min 1,5 μm tin-plated
Insulation
With pitch
American Wire Gauge
Insulation resistance(grd-sig-grd)
Operating temperature
Soldering temperature
Polyester
-40 ... +105 250/4
Nomex
-40 ... +125 260/5
2,54
24
10>10
PEN
-40 ... +125 260/5
Polyimide
-40 ... +125 260/5
mm
AWG
S
°C
°C/sec
A
D
B
B
G
G
| 18PANTA FFC
FFC
* customer specials on request
PANTA FLEXIBLE MODULES are customized applications.
PRODUCT DESCRIPTION
BENEFITS
Customized designMeets customer requirementsKnow-how of flexible connection technologiesCombinations of technologies (e.g. lamination and molding process)
| 19PANTA FLEXIBLE MODULES
FLEXIBLEMODULES
PANTA FLEXIBLE FLAT CABLES or PANTA FLEXIBLE BOARD CONNECTIONS are assembled with electronic components into a PANTA FLEXIBLE MODULE in our manufacturing process.
PANTA - TECHNICAL EQUIPMENT
LAMINATIONLaminating is the process used to embed the copper conductor in insulating foil by using pressure and heat. The foils are coated with adhesive on one side. The copper conductors are parallel to each other. Different pitches can be combined.
CUTTERSThe laminated rolls are slit to the final cable width. The lengths of the cables are produced by the cross cutting afterwards.
STRIPPINGThe cable terminations are made in a stripping process. The insulation is stripped off the copper wires using a special cutter. The conductor ends can then be processed further to the required termination style with specific bending tools. (For further information see PANTA FIX JUMPER on page 2)
CRIMP-TECHNOLOGYCrimp connections to flat conductors of 1.27 mm and 2.54 mm pitch are possible with the crimping technology from Tyco and Nicomatic. (For further information see PANTA FIX Crimp on page 11)
OVERMOLDINGFully hydraulic injection molding machines can be used to overmold the cable ends of FFCs or to assemble FLEXIBLE MODULES. The maximum in-jection volume is 15 cm³ with a projected area of max. 75 cm².
| 20PANTA FLEXIBLE MODULES
FLEXIBLEMODULES
PANTA - TECHNICAL EQUIPMENT
®POTTING WITH MACROMELT®Macromelt allows clean processability and does not
contain any solvents or other harmful substances. ®Macromelt is particularly suitable for applications
that require good adhesion to conductor or housing ®materials at low processing pressure. Macromelt is
injected with low pressure into the cavities. It spreads gently around even the tiniest components, seals and protects the components.
STIFFENERSSpecial equipment places adhesive tapes and reinforcements onto our FFCs and ZIF jumpers.
LASER PROCESSINGA highly precise, powerful 300 W CO laser im-² plements fast and very flexible stripping modes.
SOLDERINGSelective soldering systems ensure optimum soldering while minimizing the heat stress for components. A reflow soldering system and place-ment systems are available for the assembly of SMD components.
| 21PANTA FLEXIBLE MODULES
FLEXIBLEMODULES
PANTA - TECHNICAL EQUIPMENT
RESISTANCE WELDINGThe contact between the components and PANTA cables by means of resistance welding ensures a safe interface of very high quality. Welded flexible modules are later potted or overmolded in order to secure the weld.
ASSEMBLY LINES
FAS - Flexible assembly systems ensure high quality modules even for lower volumes.
AAS - Automatic assembly systems produce high volumes of customized modules in fully auto-matic operation.
The optimal assembly line is selected after a technical and qualitative assessment of the customized module according to cost and pro-ductivity.
SUMIDA flexible connections GmbH is ISO TS 16949 and ISO 14001 certified. If you like to get further information we could provide a presentation about the topics PPAP, IMDS, ROHS/REACH, UL to you.
®
FLEXIBLEMODULES
| 22PANTA FLEXIBLE MODULES
SUMIDA flexible connections GmbHAgathe-Zeis-Str. 5 · D-01454 Radeberg · GermanyPhone +49 3528 404030 · Fax +49 3528 404040
[email protected] · www.sumida-flexcon.com
Version 03/2014