of 20 /20
Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax: (732) 381-1006 (732) 381-1572 21 METER MOVEMENTS METER MOVEMENT MULTIFUNCTION EDUCATION METER SERIES • DC Voltage Range: 0-100mv – 1v – 10v – 50v • DC Current Range: 0-100μA – 100mA – 1A – 5A • Sensitivity: DC 10KΩ/V ACCURACY: DC Voltage: ±2.5% of full scale DC Current: ±2.5% of full scale • Weight: 0.8 lbs. Part No. Price 01KAL41 $13.75 PORTABLE INSTRUMENTS Part No Description Price 01TR3500 0-1-5-25 Volts DC $104.00 01TR3501 0-25-100-500 Volts DC 104.00 01TR3541 0-5-25 V AC, Iron Vane Type 133.00 01TR3543 0-150 V AC, Iron Vane Type 125.00 SENSITIVE GALVANOMETER EDUCATION METER SERIES Range: –300µA to 300µA or –500µA to 500µA Internal Resistance: 80–125/ 2.4–3K or 40–80/ 1.5–2K Weight: 0.35 lb. Designed to measure weak current or the potential difference in DC circuit. It may be used in experiments on bridge measurement, thermocouple, electro- magnetic induction and photoelectric effect etc. Part No. Description 1-9 10+ 01SM1102 Gal. –300µA to +300µA $9.90 $8.90 01GAL500UA Gal. –500µA to +500µA 9.50 8.95 METER MOVEMENT AMMETER DC • Range: 0-50µA Resolution: 1µA Dimension: 80 x 80 x 45mm Weight: 0.154 lbs. Part No. 1-9 10+ 01DK80 $8.25 $7.50 PANEL MOUNT AMMETER; VOLTMETER METER MOVEMENTS Molded; transparent face. ±5% tolerance. Panel mounting. Hole: 2 3 /8" dia. METER MOVEMENTS EDUCATION METER SERIES Accuracy: ±5% full scale AMMETER; VOLTMETER Part No. Description 1-9 10+ 01SM1105 Voltmeter –1 to +3V or $9.95 $8.95 –5 to +15V 01SMAC15 Voltmeter AC; 0 to 3 or 9.95 8.95 0 to 15V 01SM1106 Ammeter DC, 0-200µA 9.95 8.95 01SM1107A Ammeter DC; 0–100mA 9.95 8.95 01SM1107B Ammeter DC, 0–500mA 9.95 8.95 Part No. Description 1-9 10+ 01MAMO-50U 0-50µA DC Amp Meter $10.95 $9.95 01MAMO-100U 0-100µA DC Amp Meter 10.95 $9.95 01MAMO-1 0-1mA DC Amp Meter 10.95 9.95 01MAMO-50 0-50mA DC Amp Meter 10.95 9.95 01MAMO-100 0-100mA DC Amp Meter 10.95 9.95 01MAMO-500 0-500mA DC Amp 10.95 9.95 01MAMO-1000 0-1A DC Amp Meter 10.95 9.95 01MAMO-5000 0-5A DC Amp Meter 10.95 9.95 01MAMO-10000 0-10A DC Amp Meter 10.95 9.95 01DVMO-10 0-10V DC Volt Meter 10.25 9.25 01DVMO-15 0-15V DC Volt 10.25 9.25 01DVMO-30 0-30V DC Volt Meter 10.25 9.25 01DVMO-100 0-100V DC Volt Meter 10.25 9.25 01AVMO-150 0-150V AC Volt Meter 10.25 9.25 01AVMO-300 0-300V AC Volt Meter 10.25 9.25 Ideal for schools, labs and other basic monitoring needs. Wide, clear view plastic 3 1 /2". AC iron vane types are true RMS » 2% accuracy on DC and AC iron vane type » 3% accuracy on AC rectifier type and ohms » 3% accuracy on temperature. AC iron vane type and ohm meter type movements are fuse protected. Durable molded plastic case. Ammeter

Embed Size (px)

Transcript of PANEL MOUNT EDUCATION METER SERIES AMMETER; VOLTMETER · 01DVMO-10 0-10V DC Volt Meter 10.25 9.25...

  • Call Toll Free: 1 (800) 972-2225 In NJ: (732) 381-8020 Fax: (732) 381-1006 (732) 381-1572 21



    0-100mv 1v 10v 50v DC Current Range:

    0-100A 100mA 1A 5A Sensitivity: DC 10K/V ACCURACY: DC Voltage: 2.5% of full scale DC Current: 2.5% of full scale Weight: 0.8 lbs.

    Part No. Price01KAL41 $13.75


    Part No Description Price01TR3500 0-1-5-25 Volts DC $104.0001TR3501 0-25-100-500 Volts DC 104.0001TR3541 0-5-25 V AC, Iron Vane Type 133.0001TR3543 0-150 V AC, Iron Vane Type 125.00


    or 500A to 500A Internal Resistance:

    80125 / 2.43K or 4080 / 1.52K

    Weight: 0.35 lb.Designed to measure weak current or the potential difference in DC circuit. It may be used in experiments on bridge measurement, thermocouple, electro-magnetic induction and photoelectric effect etc.Part No. Description 1-9 10+01SM1102 Gal. 300A to +300A $9.90 $8.9001GAL500UA Gal. 500A to +500A 9.50 8.95

    METER MOVEMENTAMMETER DC Range: 0-50A Resolution: 1A Dimension: 80 x 80 x 45mm Weight: 0.154 lbs.

    Part No. 1-9 10+01DK80 $8.25 $7.50



    Molded; transparent face. 5% tolerance. Panel mounting. Hole: 23/8" dia.


    Accuracy: 5% full scale


    Part No. Description 1-9 10+01SM1105 Voltmeter 1 to +3V or $9.95 $8.95 5 to +15V01SMAC15 Voltmeter AC; 0 to 3 or 9.95 8.95 0 to 15V01SM1106 Ammeter DC, 0-200A 9.95 8.9501SM1107A Ammeter DC; 0100mA 9.95 8.9501SM1107B Ammeter DC, 0500mA 9.95 8.95

    Part No. Description 1-9 10+01MAMO-50U 0-50A DC Amp Meter $10.95 $9.9501MAMO-100U 0-100A DC Amp Meter 10.95 $9.9501MAMO-1 0-1mA DC Amp Meter 10.95 9.9501MAMO-50 0-50mA DC Amp Meter 10.95 9.9501MAMO-100 0-100mA DC Amp Meter 10.95 9.9501MAMO-500 0-500mA DC Amp 10.95 9.9501MAMO-1000 0-1A DC Amp Meter 10.95 9.9501MAMO-5000 0-5A DC Amp Meter 10.95 9.9501MAMO-10000 0-10A DC Amp Meter 10.95 9.9501DVMO-10 0-10V DC Volt Meter 10.25 9.2501DVMO-15 0-15V DC Volt 10.25 9.2501DVMO-30 0-30V DC Volt Meter 10.25 9.2501DVMO-100 0-100V DC Volt Meter 10.25 9.2501AVMO-150 0-150V AC Volt Meter 10.25 9.2501AVMO-300 0-300V AC Volt Meter 10.25 9.25

    Ideal for schools, labs and other basic monitoring needs.

    Wide, clear view plastic 31/2". AC iron vane types are true RMS

    2% accuracy on DC and AC iron vane type

    3% accuracy on AC rectifier type and ohms

    3% accuracy on temperature. AC iron vane type and ohm meter type movements are fuse

    protected. Durable molded plastic case.


  • 22 ELECTRONIX EXPRESS / RSR 900 Hart Street, Rahway, NJ 07065


    Measures inductance, capacitance and resistance Handheld with low power consumption 5 digits display Test Parameters: L/Q, C/D, R/Q, Z/Q Test Frequencies: 100Hz, 120Hz, 1KHz Test Level: 0.3Vrms Range:

    L 1H to 9999H @ 100/120Hz L .1H to 999.9H @ 1KHz C 1p to 9999f @ 100/120Hz .1p to 999.9f @ 1KHz

    Power Supply: 9V battery or 12V adapter Weight: 1 lb.Part No. 01LCR2821 Price $275.00

    IntelliTweeze RECHARGEABLE SMD TESTERRECHARGEABLE R-C-L TweezerMeter IntelliTweeze is an R-L-C meter in a tweezer for measuring surface mount chip caps, chip resistors and inductors. An exciting answer to the old problem of identifying, testing and trouble-shooting SMD components.

    SPECIFICATIONS Resistance Range: 0.05 to 9.9 M Ohm Precision: up to 0.2% Capacitance Range: 0.5 pF to 4999 mF Precision: up to 0.2% Inductance Range: 0.5 uH to 999 mH Precision: up to 0.5% Quality factor Q Range: 0.001 to 1000 Dissipation factor D Range: 0.001 to 1000

    Part No. 01TM500 Price: $395.00

    Measures Resistance, Capacitance, and Inductance Measures Continuity Measures Diode PolarityThe new updated 2012 model of the IntelliTweeze isavailable now.

    FEATURES: Improved LiPO battery USB/Wall adaptor (included) Carrying case. 1 year warranty. Made in Canada.

    Part No. 01DM9030 Price: $85.95

    Has all features of a regular Digital Multimeter

    DC V, AC V, Ohms, Freq., Temp., Diode DCA, ACA, Beeper



    This digital tweezer/tester makes it easy to test tiny surface mount resis-tors and capacitors. Precise tips made of non-magnetic steel are able to pick and test even the smallest SMD com-ponents. It can also test regular compo-nents where leads may be too short to insert into test terminals.

    Auto power off Low battery indicator Built-in high-precision R/C probe Ideal for Surface Mount Devices Weight: 5.0 oz.


    Part No. Description Price 01DMMS8910 Digital Tweezer Tester for $29.95 resistance and capacitance

    Can measure RPM, DWELL Inductive pick-up sensor

    included 10M impedance, 18mm LCD Size: 185mm x 87mm x 39mm


    One hand operation for fast, precise measurement

    4000 count LCD Measures resistance, capacitance, and

    diode test Relative mode for zero or user supplied

    reference Overrange and low battery indicators Auto Power off

    Part No. 01EXRC100 Price: $69.95

    MODEL RC100

    IN-CIRCUIT ESR & DCR CAPACITOR TESTERMODEL 881The 881 is a portable In-Circuit ESR meter that measures the equivalent series resistance of electrolytic caps in or out of circuit. It also measures low value non-inductive resistors.

    FEATURES: ESR from 0.1 ~ 30 ohm Tricolor chart shows ESR

    readings of Good, Fair, and Bad DCR from 0.1 to 30 ohm 15 mVp-p output test voltage (will

    not turn on any solid state devices) Comes complete with one-handed tweezer test probe

    Part No. Description Price01BK881 Model 881 In-Circuit Cap Analyzer $210.00

  • Call Toll Free: 1 (800) 972-2225 In NJ: (732) 381-8020 Fax: (732) 381-1006 (732) 381-1572 23

    CAPACITANCE METERMODEL MY6013 3 1/2 digit LCD display. Nine ranges from 200pf to 20,000F. External zero adjustment knob. Size: 3.6" x 7.4" x 1.3" Weight: 8 oz.Part No. 01MY6013 Price: $37.95


    Measures capacitance 0.1pf to 20,000F with 1% accuracy up to 200F and 2% after that

    Measures inductance 0.1h to 200H; accu-racy 2%

    Measures dissipation factor of caps and Q of inductor

    Measures resistance 1 milli to 20M 31/2 digit LCD Low battery and overload indicator

    Part No. Price01CT875B $225.0001TL8 26.00

    TL-08Opt. SMD



    Models 878B / 879B

    Part No. Description Price01BK878 Model 878B $249.0001BK879 Model 879B 299.00


    Measures capacitance, resistance and induc-tance.

    In circuit mode (Model 879B only) Components can be measured with selectable

    test frequencies in series or parallel mode. Measures dissipation factor of capacitors D

    and Q of inductors. Remembers minimum and maximum values. Excellent for sorting parts in engineering, QC or production.

    Keeps running average of tested components. Selectable test frequencies 100Hz, 120Hz, 1KHz, 10KHz,

    (120Hz and 10KHz Model 878B) Relative mode Backlight (Model 879B) Accessories: Alligator clip leads, 9V battery, USB cable AC Adaptor included (879B Only) Capacitance: Up to 20mF Resistance: Up to 10M Ohm Inductance: Up to 1000H Dimensions: 7.2" (L), 3.4" (W), 1.6" (H) Weight: 10.725 lbs.


    Measures inductance, capacitance and resistance Handheld with low power consumption 5 digits display Test Parameters: L/Q, C/D, R/Q, Z/Q Test Frequencies: 100Hz, 120Hz, 1KHz Test Level: 0.3Vrms Range:

    L 1H to 9999H @ 100/120Hz L .1H to 999.9H @ 1KHz C 1p to 9999f @ 100/120Hz .1p to 999.9f @ 1KHz

    Power Supply: 9V battery or 12V adapter Weight: 1 lb.

    Part No. 01LCR2821 Price $275.00

    LCR METER WITH PC INTERFACEMeasures inductance, capacitance and resistance with secondary parameters (Q, D, R). Set Hi/Lo limits using absolute value or % limits Parallel or series equivalent circuit Mix/Max/Avg recording Open and short zero removes unwanted stray impedances Built-in RS-232 with Windows software Complete with test leads, alligator clips, 9V battery and

    holster and cable

    Part No. Description Price01EX380193 380193 LCR Unit $219.99


    Part No. 01BK880 Price: $379

    The 880 is a 40,000 count dual display handheld LCR meter. It offers capabilities typically only found in bench LCR meters such as basic measurement accuracy up to 0.1%, selectable test frequencies up to 100 kHz, selectable test signal levels and a 4-terminal socket configuration. When using the included four-terminal Kelvin test leads, this configuration can reduce the effect of lead impedances and contact resistance thus minimizing measurement errors and improving accuracy especially in the lower impedance range.Users will also benefit from the Auto detect function; with a push of a single button, the unit automatically identifies primary parameters L, C or R and related secondary parameters, and sets the suitable series/parallel equivalent mode and range. A mini USB interface allows users to transfer data to a PC using either the provided data logging software or SCPI commands sent from a custom program.

  • 24 ELECTRONIX EXPRESS / RSR 900 Hart Street, Rahway, NJ 07065


    Part No. Description Price01CT890 Capacitance Sorting Meter $135.00

    The Model 890B Capacitance Meter features a large 4 1/2 LCD with dual display, 11,000 counts resolution, and 9 automatically selected ranges with full scale value from 1.0pF to 50mF. Designed to meet the latest international safety standards, the meters dedicated chip and microprocessor allow programmable high/low limits or pre-programmed standard capacitor tolerances, making it ideal for measuring values, inspection, sorting capacitors and testing capacitors against standard tolerances. Optional software and cabling is available for PC based data logging and monitoring.

    Dual display simultaneously displays val-ue and deviation from selected tolerance

    Sort on preset tolerance of 1, 5, 10%

    Program unique values to sort for specific circuit applications

    USB PC interface for data log-ging software available

    Part No. 01CT810 Price: $85.00

    31/2 digit LCD display Nine ranges from 200

    pF to 20,000F


    0.1 pF resolution Low battery and over-

    range indicator


    Part No. Description Price01CT830 Auto Ranging Cap Meter $289.00

    Auto ranging Dual display simultaneously displays value and deviation

    from selected tolerance Sort on preset tolerance of 1, 5, 10% Program unique values to sort for specific circuit applications USB PC interface for data logging software available

    The Model 830B Capacitance Meter features a large 4 1/2 LCD with dual display, 11,000 counts resolution, and 9 automatically selected ranges with full scale value from 1.0pF to 199.99mF. Designed to meet the latest international safety standards, the meters dedicated chip and microprocessor allow programmable high/low limits or pre-programmed standard capacitor tolerances, making it ideal for measuring values, inspection, sorting capacitors and testing capacitors against standard tolerances. Optional software and cabling is available for PC based data logging and monitoring



    Part No. Description Price01LCR819 LCR Meter Model LCR 819 $1,655.0001LCR821 LCR Meter Model LCR 821 2,295.0001LCR05 Test Fixture For Radial Leads 189.0001LCR08 Test Fixture for SMD Components 235.00

    Measures capacitance, resistance and inductance. 12Hz to 100KHz, 503 continuously variable

    frequencies. .05% high measurement accuracy. 100 sets memory for save/recall of setup state. R/Q, C/D, C/R, L/Q test modes. Absolute Value, Value, and % measurement display. 240 x 128 dot matrix LCD display. Test condition and test result shown on screen simultaneously. Kelvin probe set included (LCR06). MODEL LCR 821: Features a 200kHz frequency ramp, additional

    test modes plus RS232 and software included.


    LCR / ESR METERIN-CIRCUIT; SYNTHESIZEDMODEL 885This meter is the first handheld meter of this type on the market, with a wide range of test frequencies up to 10KHz and many measure-ment parameters including Z, L, C, DCR, ESR, D, Q and as well. The 885 is designed for both component evaluation on the production line and fundamental impedance testing for bench-top applications. With a built-in direct test fixture, you can test the lead components very easily. The optional 4-wire test clip can give a convenient connection to larger components and assemblies with the accuracy of 4-wire testing.

    FEATURES: Measurement parameters: Z,

    L, C, DCR, ESR, D,Q, and Test conditions: 100Hz,

    120Hz, 1KHz, 10KHz, 1Vrms, 0.25Vrms, 0.05Vrms

    0.5% basic accuracy Dual LCD display SMD surface mount tweezer

    probe included

    SOFTWARE FEATURES: Go-No Go testing (component


    Part No. Description Price01BK885 LCR/ESR Meter $595.0001BKTL08C Test Clip - 4 Wire 83.00

    SMD Probe Included

    CAPACITANCE METER KITYou will have your own capacitance meter after successful completion of this project. Range: 1pf 500F About 1% accuracy Automatic range switch Zeroing available Real time serial output of measurement read-outs with time stamp Low cost and easy to build 8 to 16V DC power supply required (but not included)) Size: 3" x 2.3" x 0.6"; Wt: 1.5 oz.

    Part No. Description Price32JYE06001 Cap. Kit $13.9532JYE06002 Cap. Meter Assembled 15.9516D9500MA 9V DC Adapter 4.75

    Very quick response, user friendly

    Fully auto/manual selection DC resistance measurement Rechargeable battery / AC

    powered Infrared RS-232 interface


    Remote bin (component grading) Remote operation



    Part No. 01LCR6002 Price: $890.00

    3.5 color LCD 10Hz~2kHz Test frequency Basic accuracy : 0.05% Measuring speed up to 25ms

    (max.) Full frequency range or spot OPEN/SHORT 16 major/secondary parameter measurement combinations and two

    additional monitoring parameters(maximum four different parameters can be shown simultaneously)

    DCR measurement and internal D.C. bias voltage (2.5V) PASS/FAIL judgment Auto Level Control (ALC) function BIN function provides 9BIN and 1AUX, totally 10 BIN 10 steps listed tests to select different frequency, voltage and current

    criteria Standard interface : RS-232C, Handler and USB storage

  • Call Toll Free: 1 (800) 972-2225 In NJ: (732) 381-8020 Fax: (732) 381-1006 (732) 381-1572 25

    313A312B 316

    CLAMP METERSMODELS 312B, 313A MINI AC CLAMP METERSMODEL 316 MILLI-AMP AC/DC CLAMP METERThese models offer, in addition to current reading, the ability to measure voltage and resistance. Practical where a traditional sized meter may be to cumbersome to use. Features include, overload protection, low battery indicator, 0.98" clamp opening size, continuity test, 2 times/sec. sample rate, auto ranging, data hold. Model 316 also features a 4 digit display, and auto-off.

    RATINGS 313A 312B 316AC Current 600A 200/600A 100ADC Current 600A 100AAC Voltage 600V 200/600V 600VDC Voltage 600V 600VResistance 1K 200 Ohm 10K

    Part No. Description Price01CM312 BK Model 312B mini clamp meter $85.0001CM313 BK Model 313A mini clamp meter 159.0001CM316 BK Model 316 milli-amp clamp meter 169.00

    Double insulation (600V CATIII rating) AC and DCV: Four ranges to 600V AC and DC Current: Two ranges to 600A Resistance: To 40M in six ranges Frequency: 100KHz from test terminal,

    400Hz from current clamp Back-lit 3999 count display with

    42 segment bar graph Standard Features: Auto/manual ranging, auto

    zero key for DCA, data hold, min/max, jaw lighting, auto power off, continuity and diode tests


    Part No. 01MS2138 Price: $62.95

    CLAMP METERMODEL 367A DC & AC current

    to 2000A (2 rang-es)

    DC voltage to 200V

    Part No. 01CM367 Price: $225.00

    AC voltage to 750V Resistance to 2K Peak Hold, Data

    Hold 13/4" clamp opening

    EX710EX810, EX830

    CLAMP METERSMODELS EX710, EX810, EX830 True RMS (EX830) Frequency, temperature, capacitance AC Current: 1,000A (EX810, EX830);

    800A (EX710) DC Current: 1,000A (EX830) AC/DC Volts: 600V Temperature (IR): 58 to 518 F


    Part No. Description Price01EX710 800A, Clamp $89.9901EX810 1,000A, Clamp 149.9901EX830 1,000A, True RMS Clamp 219.99


    MA200 MA220

    CLAMP METERSMODELS MA200, MA220 Compact size Auto power off One touch Auto Zero

    (MA220) Temperature, frequency and

    capacitance (MA220) 2,000 count (MA200), 4,000

    count (MA220) AC/DC Volts: 600V AC Current: 400A DC Current: 400A (MA220)

    Part No. Description Price01MA200 400A AC Clamp $54.9401MA220 400A AC/DC Clamp 109.99


    Part No. 01UT202A Price: $19.75

    40 METERS / 131 FEET RANGE Compact size AC clamp meter, up to 600 amps. Powered by RioRand Advanced Technology AC/DC voltage, resistance, continuity, and diode

    check Dara hold + Maximum value measurement Carrying case included


    Part No. 01UT205 Price: $39.95

    40 METERS / 131 FEET RANGE

    Measures AC current up to 1,000 amps AC/DC voltage, AC current, resistance,

    frequency, capacitance, continuity, duty cycle & diode check

    Built-in flashlight for AC current measurement Data hold + relative value measurement

  • 26 ELECTRONIX EXPRESS / RSR 900 Hart Street, Rahway, NJ 07065


    & CURRENT DETECTORSMODEL 40130Non-contact AC voltage from 100 VAC to 600 VAC.Flashing LED & push button ON/OFF beeper.

    MODEL DV30Non contact AC Voltage Detector (12V to 600V AC). Sensitivity adjustment available

    MODEL DVA30Non contact AC Voltage and Current Detector. AC voltage (12V to 600V), AC current (200mA to 1000A). Sensitivity adjustment available.Part No. Model Price01EX40130 40130 $11.9901DV30 DV30 14.9501DVA30 DVA30 44.99


    Part No. 29TR9610 Price: $8.90

    EMF TESTERELECTROMAGNETIC FIELD TESTER Range: 20/200/2,000 micro Tesla 200/2,000/20,000 milli-Gauss Separate Probe Size: 163 x 70 x 33 mm

    Part No. 01EMF827 Price: $99.00

    Model 307A Model 308A

    INSULATION TESTERSThese are intended primarily for periodic testing of industrial motors, transformers, electrical wiring and cable insulation for signs of deterioration. Useful for testing of TV sets and appliances to assure no hazardous leakage current.

    Part No. Description Price01BK307 Analog $205.0001BK308 Digital 279.00

    For use on 110-125 VAC receptacles Detects common wiring problems in standard

    and (GFCI) ground fault circuit interrupter outlets

    To test, simply plug into receptacle, push the TEST button and observe the light pattern

    One Year Limited Warranty

    Selectable 250V, 500V or 1,000V insulation test

    Low resistance test Extra rugged integral

    carrying case

    Push to test Model 308 offers higher accuracy

    and digital display



    MODELS: 373; 374; 375;376

    True RMS current and voltage (All models)

    AC/DC Volts: 600 AC Current: 600A;

    1000A (376 only) Resistance: 6K Ohm (373,

    374); 60K Ohm (375 & 376)

    Auto shut-off, display hold Frequency: 500HZ (375,

    376) Capacitance 1-1000uF Flex Probe: 18"; flex probe

    can measure up to 2500A (Model 376)

    Soft carry case Warranty: three years

    Part No. Description Price01FL373 Clamp Meter 373 $202.9501FL374 Clamp Meter 374 269.9501FL375 Clamp Meter 375 349.0001FL376 Clamp Meter 376 with iFlex 359.95


    Work horse clamps with increased perfmance and flexiblility


    Measures load current without splitting line cord X1 and X10 measurement points Built-in voltage measurement jack

    Part No. 01ELS2 Price: $18.90


    AC65 AC68

    MODELS AC65, AC68


    AC Current (400A/600A) DC Voltage: 600V (AC68) AC Voltage: 600V Resistance: 40K Frequency: 20KHz (AC68) Counts: 4,000


    Part No. Descr. Price01CMAC68 AC68 175.00

  • Call Toll Free: 1 (800) 972-2225 In NJ: (732) 381-8020 Fax: (732) 381-1006 (732) 381-1572 27


    MODEL DT2236


    Photo tach. 5 to 100,000 RPM Contact tach. 0.5 to 19,999 RPM Includes both

    a photo and contact tachometer into one precision instrument. Comes complete with accessories, reflective tape and carrying case.

    Can measure surface speed

    Part No. Price01DT2236 $155.00

    DIGITAL STROBOSCOPE 10010,000 RPM/flash per min. Accuracy: (.05% +1d) Xenon flash tube, 8mm red LED Size: 210 x 120 x 120 mm

    Part No. 01DT2239A Price $211.00

    DIGITAL STROBOSCOPE W/ RS232 INTERFACE Range: 20 to 10,500 RPM/flash per min RPM setting by push button External trigger signal input for simultane-

    ous test of measurement RS232 computer interface

    Part No. 01DT2269 Price: $235.00

    Part No. 01AM4202 Price: $145.00

    Measures wind speed in m/s, km/hr, ft/min. and knots & temperature

    Twisted vane arms sensor Data hold Accuracy: 2% + 1 digit Sensor head: 2.8" dia.Equipped with conventional twisted vane arms sensor, it is sensitive to low wind speed and can measure as high as 90 miles/hr. It is used in wind tunnel, heating/air conditioning, and automotive applications. Complete with sensor probe and manual.


    PH METER 0 to 14 pH x .01 pH Max, min., memory recall button -P circuit with LCD display pH, mV, temp., manual temp adj. PH electrodes (optional)Part No. Description Price01PH207HA PH Meter $95.0001PE03 Electrode, General Cost Effective 26.0001PE01 Electrode, Laboratory, 50.00 High Quality and Field Usage

    Part No. Price01LX101 $65.95


    0-50,000 Lux in 3 ranges Accuracy 5% + 2 digits Size: 4.3" x 2.9" x 0.9" Spectrum meets C.I.E. photopic Equipped with precision selenium

    photo-voltaic cell. Ideal for photographers and lighting industry. Complete with light sensor, carrying case and manual

    LIGHT METER 2,000/20,000/100,000 Lux Data hold Tungsten, fluorescent, mercury

    sodium 7 light type select Microprocessor circuit Size: 185 x 78 x 38 mm

    Part No. 01LX107HA Price: $80.00

    HUMIDITY/TEMPERATURE METERMODEL MS6503 Simultaneous display both RH and temp Adjustable interval data logging Humidity: Range 0 ~ 100%, 0.1% resolution, 2.5%

    accuracy Temperature: Range 20C ~ 60C,

    4F ~ 140F, resolution 0.1C, 0.1F, accuracy 0.7C, 1.4F

    4 digit LCD with backlight, min/max, data hold, timer, auto off, compact size and weight

    Response Time: Humidity 75 sec. in slowly moving air Temp 40 sec in slowly moving air Unit comes complete with manual, battery, case,

    software, cable, probe

    Part No. 01HT6503 Price: $169.00



    Part No. 01UT390B Price: $29.95

    40 METERS / 131 FEET RANGE Supports unit selection of meter, inch and

    feet, Indirect measurement by Pythagorean Theorem

    High accuracy Measurement for distance,area,Volume Wide measuring range

    Supports data hold and data clear function, Supports data store/recall function of up to 30 measure

    Large LCD with backlight and multi-line display, Function of self calibration

  • 28 ELECTRONIX EXPRESS / RSR 900 Hart Street, Rahway, NJ 07065


    Non Contact Range: 4F to 986F

    (20C to 539C) Laser Power: Less than 1mW Accuracy: 1%1C

    Part No. 01MS6530 Price: $85.00

    D:S: 12:1 Automatic Turn

    Off: 10 seconds Size / Wt.:

    162x56x190mm; 0.6 lbs.

    SOUND LEVEL METER Range: Lo - 35db to 90db,

    Hi - 75dB to 130dB Accuracy: 1.5dB (ref 94dB @ 1KHz) Standard: IEC 651 Type 2 Frequency Range: 32Hz to 8000Hz Slow and fast time weighing characteristics Operating Temperature: 10C to 50C,

  • Call Toll Free: 1 (800) 972-2225 In NJ: (732) 381-8020 Fax: (732) 381-1006 (732) 381-1572 29


    LCD PANEL METERSMODEL DV-101 DC VOLTSMODEL DA-103 DC AMPSMODEL AV-102 AC VOLTSMODEL AA-104 AC AMPSEasy operation, professional quality, compact. Applications include education, industrial, QC and R&D, Lab.All Units Feature: LCD display, 18mm digit

    height 9V battery operation On/off switch Automatic zero adjustModel DV101 DC Volts Range/Resolution: 200mV x 0.1mV 2V x 0.001V 20V x 0.01V 200V x 0.1V Accuracy: 200mv range (0.5% + 1 digit) reading 2V, 20V, 200V ranges (0.8% + 1 digit) reading 10M input impedanceModel AV102 AC VoltsMeasure AC VoltsRange; 2V/20V/200V/600V

    Model DA103 DC Amps Range/Resolution 2mA x 0.001mA 20mA x 0.01mA 200mA x 0.1mA 5A x 0.01A Accuracy: 2mA, 20mA, 200mA ranges (1% + 1 digit) reading 5 amp range, (1.5% + 1 digit) Overload protection

    Model AA104 AC AmpsMeasure AC AmpsRange: 2mA/20mA/200mA/5A

    Part No. Description 1-9 10+01DV101 DC Volt Meter $42.50 $39.5001DA103 DC Amp Meter 42.50 39.5001ACV102 AC Volt Meter 43.00 40.0001ACA104 AC Amp Meter 43.00 40.00

    LED PANEL METERS Red LED display, 5VDC operation Large, 0.56 inch character height Adjustable decimal point 100M input impedance, 2/5 sec

    sampling time Dimensions: 44mm

    H x 68mm W

    Part No. Description 1-9 10+01DM3A 0-200mV $10.95 $10.5001DM3B 0-20V 10.95 10.5001DM3C 0-200V 10.95 10.50


    Dual slope A/D conversion Accuracy: .5% Sampling Time: 2.5 sec. Supply Voltage: 8 12V DC Size: 68mm x 44mm Input Impedance: 100M @ 200mv 10M @ 20mv 10M @ 200v

    3 1/2 DIGIT; 0.6"

    Part No. Description 1-9 10+01PMLCD1 0200mv $7.95 $7.5001PMLCD3 0200v 7.95 7.5001PMLCD5 0200v with Backlight 11.95 10.95

    CATII 600V rating Approx. 0.4 sec.

    sampling Instruction Manual

    ENERGY CONSUMPTION METERKILL A WATTThis allows you to measure energy consumption of appliances. Simply connect these appliances to the Kill A Watt, and it will assess how efficient they really are. Large LCD display will count consumption by the Killowatt-hour, same as your local utility. You can calculate your electrical expenses by the day, week, month, even an entire year. Also check the quality of your power by monitoring Voltage, Line Frequency, and Power Factor. Large LCD display Cumulative Killowatt-Hour Monitor Forecast Your Costs Also display Volts, Amps, Watts, Hz, VA 0.2% Accuracy

    Part No. 01P4400 Price: $28.95


    Part No. 01TR9055 Price: $175.00

    CAT IV 600V Rated Diode Test Continuity Beeper REL Mode Data Hold Auto Power Off

    Blue 4.5V-30V 3 Digit; 1% accuracy Best suited for battery level display

    Part No.01DFR0130 Price $8.75


    AC VOLTAGE TESTER Non-contact test of voltage Sensitivity adjustable TV and Monitor Radiation Test

    Part No. 1-9 10+01ACMS-48M $3.95 $2.95

    Discern from DC volt Selftest for safety purposes

    Full function, Auto / Manual Ranging DMM Light Meter from 0 to 40,000 Lux Sound Meter from 35.0 to 100 dbc Relative Humidity Meter Temperature Ranges (F & C) Capacitance Ranges from 50nF to 100F Visual AC Voltage Detector Overload Protection - Fused mA and Amp ranges Includes: Safety Test Leads, Thermocouple Probe,

    and 9 Volt Battery Voltage Ranges: AC to 700V, DC to 1000V AC/DC Current Ranges to 10 Amps Resistance from 400 Ohms to 40M Ohms Frequency Ranges form 5Hz to 10MHz uA/mA from 400uA to 400mA AC/DC

    PURE WATER TESTERDisplays water purity by measuring its conductivity. Using this meter you can quickly evaluate the effectiveness of water filters, purity of water used for industrial process, or just for drinking. Does not detect toxic particles.Display: 31/2 LCDMeasurements: 0-1999S (micro Siemens)

    Part No. 01WA300 Price: $89.00

  • 30 ELECTRONIX EXPRESS / RSR 900 Hart Street, Rahway, NJ 07065

    Frequency Range: 10Hz 1MHz

    Accuracy: 3% + 2Hz Wave Form: Sine / Square Output: Sine: 8Vrms; Sq: 10Vpp Attenuator: 0, -20db, -40db and fine adjuster


    Part No. Price01SG2601A $210.00

    Part No. 01SG4160 Price: $189.95

    100kHz to 150MHz on six bands Output to 450 MHz on harmonics AM modulation, Internal or External, 0%

    to 100% Frequency monitor output for external

    frequency counter Step and variable attenation to -40db


    AUDIO GENERATORMODEL 3001 20 Hz to 150 kHz Sine/

    Square Wave Audio Gen-erator

    Sine and square wave generator

    20 Hz to 150 kHz in 46 steps

    Part No. 01BK3001 Price: $85.00

    Low distortion RC oscillator

    Variable output control Compact, fully portable,

    light weight Low battery indicator


    Part No. 01FG4010 Price: $239.00

    Sine, square, triangle, pulse & ramp output Variable duty cycle Variable DC offset Range: 0.2 Hz to 2 MHz in 8 ranges

    2 MHZ MODEL 4010A



    Part No. Description Price01FG4011 Model 4011A $329.0001FG4012 Model 4012A (Sweep Version) $352.00

    Sine, square, triangle, pulse & ramp output

    Coarse & fine tuning 4 digit LED display

    Variable duty cycle Variable DC offset Range: 0.2 Hz to 5

    MHz in 7 ranges.



    FUNCTION/SWEEPGENERATORS4 MHZ MODELS 4001A AND 4003A Generates 6 waveforms sine, trian-

    gle, square, ramp, pulse. 0.5 ~ 4MHz frequency range. LIN/LOG sweep mode width > 100:1

    continuously variable. Internal/external counter function with 5 digit

    autorange LED display (Model 4003A Only). 20Vp-p output into open circuit. TTL output, VCG input, 100% DC offset.

    Part No. Description Price01FGBK4003BK 4003A With Display $251.0001FGBK4001BK 4001A No Display 187.00

    The SG-4162AD is a combined radio frequency signal generator and frequen-cy counter. The 6 character LED display allows direct reading either generated internally or from an external source. The frequency generator has a range of 100KHz 150MHz with sine waveform and adjustable output level. The frequency counter has a range of 10Hz to 150MHz.

    Part No. Price01SG4162AD $335.00


    100kHz to 150MHz on six bands Output to 450 MHz on harmonics AM modulation, Internal or External, 0%

    to 100% Frequency monitor output for external

    frequency counter Step and variable attenation to-40db


    Part No. 01SG2005 Price: $299.00

    AUDIO GENERATORMODEL GAG810 Frequency Range: 10Hz ~ 1MHz 0.02% low sine wave distortion 6 step output attenuator External sync function Square wave output voltage 10V p-p or

    more (no load) Complete with instruction manual, test

    lead, power cord

    Part No. Price01GAG810 $220.00


    Part No. 01FG4017 Price: $390.00

    Linear & log sweep 5 digit LED display All features of BK Model 4011



  • Call Toll Free: 1 (800) 972-2225 In NJ: (732) 381-8020 Fax: (732) 381-1006 (732) 381-1572 31



    Frequency: 7 ranges 0.3Hz ~ 3MHz (GFG-8216A, GFG-8219A)

    Frequency: 7 ranges 0.5Hz ~ 5MHz (GFG-8250A and GFG-8255A)

    Waveforms: sine, triangle, square, ramp, TTL, CMOS

    External voltage controlled frequency (VCF) function Variable DC offset control Two-step (-20dB x 2) variable attenuator Built-in 6 digit counter with INT/EXT frequency counter

    function up to 150MHzMODELS GFG-8219A AND GFG-8255A are Sweep Function Generators also featuring: LIN/LOG sweep mode INT/EXT AM/FM modulation GVC output for synchronization

    Part No. Description Price01GFG8215 3MHz (No Digital Display) $175.0001GFG8216 3MHz with 6 Digit INT/EXT Counter 235.0001GFG8219 3MHz Sweep, Counter, AM/FM 310.00 Modulation01GFG8250 5MHz with 6 Digit INT/EXT Counter 265.0001GFG8255 5MHz Sweep, Counter, AM/FM 379.00 Modulation

    Model GFG-8250A


    Part No. Description Price 01SDG805 5MHz, Single Channel $248.0001SDG810 10MHz, Single Channel $282.0001SDG830 30MHz, Single Channel $332.0001SDG1010 10MHz, Dual Channel $329.0001SDG1025 25MHz, Dual Channel $409.0001SDG1050 50MHz, Dual Channel $509.00

    5MHz/10MHz/25MHz/50MHzSiglent Function/Arbitrary Waveform Generator are designed to deliver outstanding value and performance some key applications include IC test, simulate environment signals, electrical circuit function test, and education and training.Features: Advanced DDS

    technology,125MSa/s sampling rate, 14bit vertical resolution

    5 kinds of standard waveforms, built-in 46 kinds of arbitrary waveforms (including DC)

    Complete modulation functions: AM, DSB-AM,FM, PM, FSK, ASK, PWM, linear/logarithmic sweep and burst

    Innovative EasyPulse technology, can output pulse of low jitter, quick rising/falling edge

    Standard interfaces: USB Device, USB Host, support U-Disk storage and software update

    Provide 10 nonvolatile storage spaces for users arbitrary waveforms

    Configurable with powerful arbitrary waveform editing software EasyWave



    This model offers an outstanding price. Numerous features include sweep mode, six waveform functions and an external counter.

    Six waveform functions sine, triangle, square, ramp pulse.

    0.5Hz ~ 3MHz frequency range. Internal/External counter function. 5 digit autorange counter display. Linear/Log sweep. Sweep rate

    10mS ~ 5S.

    Amplitude 20V p-p/open, 10V p-p/50 ohm load.

    External counter trigger level control.

    VCF input 0 ~ 10V control frequency to 1000:1.

    Part No. 01FG32 Price: $195.00

    3MHZ SWEEP FUNCTION GENERATORMODEL FG-30For applications where no display is needed, this model offers exceptional value and versatility including sweep mode and six waveform functions. Six waveform functions:

    sine, triangle, square, ramp pulse.

    0.5Hz ~ 3MHz frequency range.

    Linear/Log sweep. Sweep rate 10mS~5S.

    Amplitude 20V p-p/open, 10V p-p/50 ohm load.

    20 dB attenuator

    10 MHZ SIGNAL GENERATORSINE AND SQUARE WAVE MODEL SG-10Design based on DDS technology. Microprocessor controlled for clean, accurate DC to 10MHz waveforms with frequency accuracy of 0.02% and 0.1Hz frequency resolution. Sine and Square waveforms Range: DC to 10 MHz, 0.1 Hz steps Crystal Accuracy: 50ppm Sine Wave Output: 5Vpp no load, variable

    amplitude control Square Wave Output: 5Vpp no load Compact Size: 3.8" x 5.7" x 1.5"

    Part No. 01SG10 Price: $98.00

    Part No. 01FG30 Price: $135.00


    Frequency Range:x 1-20Hz to1.5KHzx 100-2KHz to150 KHz23 frequency steps

    Output Control: 0 db, -20 db and fine adjust

    Output Impedence: 600 ohms +10%

    A pocket-sized, low distortion sine-square wave generator, ideal for field technicians, students and hobbyists. Operates with a standard 9V battery.

    Part No. 1-9 10+01SG105 $56.00 $51.50


    Output Voltage: 1.2 rms max. (no load)

    Maximum Distortion:200 Hz to 15KHz -0.05% (THD)50 Hz to 30 HKz -0.1% (THD)20Hz to 100HKz -0.5% (THD)

  • 32 ELECTRONIX EXPRESS / RSR 900 Hart Street, Rahway, NJ 07065


    FUNCTION / ARBITRARY GENERATORS5MHz / 12MHz / 25MHzThe AFG-2100 / 2000 series arb function generators are DDS (Direct Digital Synthesized) based generators designed to accommodate educational and industrial requirements for accurate and affordable signal sources. User can create and generate Arbitrary Waveforms with 10 bit vertical resolution and 4K waveform memory. Also, standard outputs Sine, Square (Pulse), Ramp (Triangle), Noise and Arbitrary Waveforms.

    The AFG-2100/2000 Series includes 6 models in three frequency bands of 5MHz, 12MHz and 25MHz. Besides the basic features of the whole AFG-2100/2000 Series, AFG-2100 also carries additional features of AM/FM/FSK Modulation, Sweep, and Frequency Counter.


    0.1Hz to 5/12/25 MHz with in 0.1Hz Resolution Sine, Square, Triangular, Noise and Arbitrary Waveform 20MSa/s Sampling Rate, 10 bit Vertical Resolution and 4k

    Point Memory for Arbitrary Waveform 1% ~ 99% adjustable duty cycle for Square Waveform Waveform Parameter Setting Through Numeric Keypad Entry

    & Knob Selection Amplitude, DC Offset and Other Key Setting Information

    Shown on the 3.5 LCD Screen Simultaneously AM/FM/FSK Modulation, Sweep, and Frequency Counter

    Functions (AFG-2100 only) USB Device Interface for Remote Control and Waveform

    Editing PC Arbitrary Waveform Editing SoftwarePart No. Description Price01AFG2005 5MHz Generator $280.0001AFG2105 5MHz w/ Counter, Sweep + AM/FM 365.0001AFG2012 12MHz Generator 380.0001AFG2112 12MHz w/ Counter, Sweep + AM/FM 445.0001AFG2025 25MHz Generator 455.0001AFG2125 25MHz w/ Counter, Sweep + AM/FM 485.0001AFG2225 2ch ; 25MHz w/ Counter, Sweep + AM/FM 495.00


    Part No. 01FAGC1 Price: $190.00

    PC BASED Output Freq: 1Hz 25MHz Output sine, square, ramp, AMFM, gauss

    noise, white noise or arbitrary wave Simulation of Real Word Signals or sensors USB interface, plug and play Operating System: Windows NT, XP, Vista Max Amp 3.5V max. Frequency Counter: DC to 50MHz


    20MHz range (sine only / square up to 5MHz) Internal AM, FM, PSK, FSK modulation Sweep range 0.1Hz to 20MHz

    Part No. 01VZMFG2120 Price: $395.00

    Full featured, menu driven direct digital syn-thesis (DDS) generator. Waveform chang-es can be made manually or via RS-232 interface.

    Part No. Description Price01BK4052 5 MHZ Dual Channel Arb Generator $499.0001BK4053 10 MHZ Dual Channel Arb Generator 599.0001BK4054 25 MHZ Dual Channel Arb Generator 850.0001BK4055 50 MHZ Dual Channel Arb Generator 1,050.00

    ACCESSORIES01BKAD40G USB-to GPIB Adapter 200.0001BKCC21 BNC Breakout-to-Alligator Clips 11.5001BKCC510 General Purpose Function Generator Kit 169.0001BKCC520 Deluxe Function Generator Kit 365.0001BKTLFG Function Generator Test Lead Set 82.00


    DUAL-CHANNEL Arbitrary waveform functions Four different bandwidth models Fully independent dual channel operation 14-bit, 125Msa/s, 16K point arb waveform generators Large, 3.5 inch color display with waveform preview USB device and host ports Optional GPIB interface and dedicated waveform keys Stable & precise sine, square, triangle and puls forms Numeric keypad, rotary control knob Complete with USB cable and instructional CD

    FUNCTION GENERATOR, 20MHZ 0.2 Hz to 20 MHz Sine, Square, Triangle, Pulse, &

    Ramp output Coarse and Fine tuning AM & FM modulation Burst operation External frequency counter to 30

    MHz Linear and log sweep Variable duty cycle Variable DC offset

    Part No. 01BK4040A Price: $669.00

  • Call Toll Free: 1 (800) 972-2225 In NJ: (732) 381-8020 Fax: (732) 381-1006 (732) 381-1572 33

    FUNCTION / ARB GENERATORSSiglents SDG2000X is a series of dual-channel function/arbitrary waveform generators with specifications of up to 120MHz maximum bandwidth, 1.2GSa/s sampling rate and 16-bit vertical resolution. The proprietary TrueArb & EasyPulse techniques help to solve the weaknesses inherent in traditional DDS generators when generating arbitrary, square and pulse waveforms.


    Dual-channel, 120MHz maximum bandwidth, 20Vpp maximum output amplitude, high fidelity output with 80dB dynamic range.

    High-performance sampling system with 1.2GSa/s sampling rate and 16-bit vertical resolution. No detail in your waveforms will be lost.

    Innovative TrueArb technology, based on a point-by-point architecture, supports any 8pts~8Mpts Arb waveform with a sampling rate in range of 1Sa/s~75MSa/s.

    Innovative EasyPulse technology, capable of generating lower jitter Square or Pulse waveforms, brings a wide range and extremely high precision in pulse width and rise/fall times adjustment.

    Analog and digital modulation types: AM, DSB-AM, FM, PM, FSK, ASK, and PWM.

    Sweep and Burst functions. High precision Frequency Counter. Standard interfaces: USB Host, USB Device (USBTMC), LAN

    VXI-11, Optional interface: GPIB. 4.3 touch screen display for easier operation.

    Part No. Description Price01SDG2042X 40MHz Waveform Generator $499.0001SDG2082X 80MHz Waveform Generator $619.0001SDG2122X 122MHz Waveform Generator $899.00

    40MHz / 80MHz / 122MHz




    DDS FUNCTION GENERATORS MODEL 4040B: 20MHZMODEL 4045B: 20MHZ WITH ARB FUNCTIONDDS (Direct Digital Synthesis) 20 MHz function generators with upgraded features including a full numeric keypad, large color screen and independent output and DC offset amplifiers. The 4045B model also includes a 12-bit, 50MSa/s, 1K memory Arbitrary Waveform capability.

    Part No. Description Price01BK4040B 20MHz; DDS Generator $550.0001BK4045B 20MHz; DDS Generator with ARB Function 750.00

    Arbitrary waveform function (Model 4045B) 20 MHz Sine / 20 MHz Square waveforms Menu-driven front panel keypad, rotary

    control knob Lin / log sweep, AM / FM mod, Burst mode, counter SCPI compatible USB interface 0.01 Hz ~ 20 MHz sine/square frequency range Color, LCD display




    (30MHz); DG1062Z(60MHZ)

    These high quality waveform generators use advanced DDS technology. Output waveforms include: Sine, Square, Ramp, Triangle, Pulse, Noise, DC and Arbitrary.Output amplitude: 2.5mV to 10Vpp ( 10MHz); 2.5mV to 5Vpp ( 30MHz); 2.5mV to 2.5Vpp (60MHz)

    Part No. Description Price01DG1022A 25MHz Generator $499.0001DG1032Z 30MHz Generator 680.0001DG1062Z 60MHz Generator 860.00

    2ch on all models Interface: USB, LAN, GPIB, RS232, USG Host to support

    USB flash, USB printer Built in pulse generator with adjustable width and edge. 200Msa/s sample rate, 16Mpts memory (DG1032Z, DG1062Z) Modulation: M, FM, PM, FSK, PWM Sweep: Linear or Log, Burst Digital Logic Output Module (optional): The first mixed signal generator (MSG) with 16 digital data channnels and 2 cloc channels Power: 100240VAC, 45440Hz, 50W Dimensions & Weight: DG1022A: 232x108x288mm; 6lbs

    DG1032Z, DG1062Z: 262 x 112 x 318mm; 7 lbs


    All models 1uHz ~25MHz with USB interface signal control Choice of 1 channel or 2 channel models AFG125P and AFG225P models feature built-in power supply

    with 2.5V, 3.3V, 5V @ 600mA 120 MSa/s, 10 bit resolution and arbitrary waveform editing

    function with 4K point memory AM, FM, PM, FSK, SUM(AFG-225/225P) modulation, sweep

    and burst functions

    Part No. Description Price 01AFG125 1 CH 25 MHz Arb $239.0001AFG125P 1 CH 25 MHz Arb w/ power supply 264.0001AFG225 2 CH 25 MHz Arb 309.0001AFG225P 2 CH 25 MHz Arb w/ power supply 333.00

  • 34 ELECTRONIX EXPRESS / RSR 900 Hart Street, Rahway, NJ 07065


    Part No. Description Price01BK4063 80 MHz Function/ARB Generator $1,295.0001BK4064 120 MHz Function/ARB Generator 1,895.0001BK4065 160 MHz Function/ARB Generator 925.00


    RF SIGNAL GENERATORSUSG SERIESRF signal generators which are pocket-sized and USB compatible.Features: PC USB interface powered and controlled Pocket size 30mm W x 103mm H x 30mm D Output power range: -30dBm ~ 0dBM Continuous wave signal without any modulation Support fixed frequency, frequency sweep, frequency hopping

    and power sweep mode 107dBc/Hz phase noise @ 100kHz offset Software supports different operating systems

    Part No. Description Price 01USGLF44 35 MHz ~ 4.4 GHz RF generator $ 475.0001USG0103 100 MHz ~ 300 MHz RF generator 450.0001USG0818 800 MHz ~ 1.8 GHz RF generator 450.0001USG2030 2 GHz ~ 3 GHz RF generator 450.0001USG3044 3 GHz ~ 4.4 GHz RF generator 450.0001ADP0003 N female to SMA adapter 50 ohm 40.00

    Part No. 01SG4160 Price: $189.95

    100kHz to 150MHz on six bands Output to 450 MHz on harmonics AM modulation, Internal or External,

    0% to 100% Frequency monitor output for

    external frequency counter Step and variable attenation to



    The 4060 Series are capable of generating stable and precise sine, square, triangle, pulse, and arbitrary waveforms and plenty of more features.Features: 14-bit, 500 MSa/s, 512k point

    arbitrary waveform generator Two independent channels with one button synchronization Large 4.3-inch LCD color display AM/DSB-AM/ASK/FM/FSK/PM/PWM modulation functions Variable DC offset Highly adjustable pulse duty cycle from 0.0001% to 99.9999% Internal/external triggering Gate and burst mode 36 built-in predefined arbitrary waveforms Store/recall up to 10 instrument settings and 32 user-defined arbitrary

    waveforms USB device port (USBTMC-compliant) with front panel USB host port GPIB connectivity with optional USB-to-GPIB adapter (model AK40G) Short circuit output protection LabVIEW drivers available


    Part No. 01FG085 Price $56.00

    Part No. Description Price 01FG8102 2 MHz Sweep Function Generator $259.0001FG8105 5 MHz Sweep Function Generator 309.0001FG8110 10 MHz Sweep Function generator 359.00

    SWEEP FUNCTION GENERATORSMODELS: FG-8102, FG-8105, FG-8110 Sweep Function Generators with Pulse Generator &

    Frequency Counter External / internal counter feature External / internal linear sweep Sine, square, triangle, TTL, ramp, pulse, saw tooth

    waveforms Variable output level control with 20dB attenuator

    MODEL 4030


    A versatile signal source which com-bines four functions into one unit waveform generation, pulse generation (through variable symmetry), frequency sweep operation and triggered opera-tion. The 4030 offers low rise and fall time pulsed signals up to 10MHz, with a 4-Digit LED display 0.1Hz ~ 10MHz in 8 decade ranges 4-digit LED display Rise and fall time 10S approx. Normal and inverting output Width: 50nS ~ 50mS (6 decade ranges & variable) Internal, external and manual triggering Eight crystal spot frequencies

    Part No. 01PG4030 Price: $395.00

    Generating continuous waveforms of Sine, Square, Triangle, Ramp (up and down), and Staircase (up and down)

    Generating servo test/control signals in micro-second resolution with user programmable pulse width, amplitude, and cycle

    Setting of frequency (or period), amplitude, and offset is done with digits - quick and straightforward

    Frequency (period), amplitude, and offset can be incrementally adjusted with rotary encoder

    Settings are memorized after power down. Can be used as an adjustable DC voltage source by setting

    amplitude to 0 Dimensions: 6" x 2.2" x 12" Wt. : 4 oz

  • Call Toll Free: 1 (800) 972-2225 In NJ: (732) 381-8020 Fax: (732) 381-1006 (732) 381-1572 35


    The DG4000 is a multifunctional generator that helps accomplish a range of testing by combining many functions into one instrument. With capabilities including Function Generation, Arbitrary Waveform Generation, Pulse Generation, Harmonic Generation, Analog/Digital Modulation source, and Counter the DG4000 series can handle a broad array of signal emulation applications from near DC up to 60 or even 200 MHz depending on model and function. The DG4000 utilizes Direct Digital Synthesizer (DDS) technology, which delivers stable, precise, low distortion signals. The sleek, upright design features a high resolution 7" display screen, while the user-friendly interface design and panel layout improves efficiency.

    Features: Generators up to 200 MHz 2 output channel 500 MSa/s sample rate 130 built-in waveforms 7-inch color LCD display 14 bit vertical resolution Standard Interfaces including LXI-C (Ethernet), USB

    device and USB hostPart No. Description Price01DG4062 60MHz Waveform Generator $920.0001DG4102 100MHz Waveform Generator $979.0001DG4162 160MHz Waveform Generator $1,249.0001DG4202 200MHz Waveform Generator $1,790.00

    60MHZ / 100MHZ / 160MHZ / 200 MHz

    4-IN-1 LAB TESTERMODEL: US 9170AFUNCTION GENERATOR, FREQUENCY COUNTER, POWER SUPPLY, DIGITAL MULTIMETER DDS Function Generator: 0.1-10MHz; sine, square, triangle, pulse, TTL outputs Frequency Counter: Ch A: 1 Hz-110 MHz; Ch B: 100 MHz - 2.7 GHz DC Power Supply: Adj volt output: 0-30V/0-3A & 3 fixed outputs: +/- 15V/1A, +5/2A Digital Multimeter: AC/DC -750/1000V; 20A 0.1 to 80M ohms, cap 1pf to 100uf, Temp -50 degrees C to 1372 degrees C RSR-232 interface Size: 15" x 12.5" x 6.6" ; wt. 30.2 lbs

    Part No. 01UIUS9170A Price: $925.00



    Save time AND MONEY by ordering the 4-IN-1 All quality, best selling models included Simplify your ordering process Analog and Digital Storage Scope versions

    available Customized packages available for ten or more

    units (add or substitute other models). Call for custom package quote (10 + required)

    DETAILS ON INSTRUMENTS:Sweep Function Generator Model FG-32. Best value, top seller. 3MHz with digital display. Six waveform functions (sine, triangle, square, ramp, pulse). Internal/External frequency counter functionTriple Output Power Supply Model PHSY3002-3. Best value, top seller. DC outputs are variable 0 ~ 30VDC @ 0 ~ 2 amps (two outputs), and a fixed 5V @ 3 amp.Digital Multimeter Model DM9803R. Best value, top seller. Bench DMM with large, 3 LCD display with back light and 42 segment bar graph. RS232 computer interface included with software and cable. DC, AC, Resistance, Capacitance, Frequency functions. AC or DC (battery) operation possible.Oscilloscope Model GOS-620 (included with 01RSRANA4). Best value and top seller in its class. 20MHz, dual channel analog scope. High sensitivity with ALT trigger functionOscilloscope GW Instek Model GDS1052U (included with 01RSRDIG4). 50MHz, 2 channel digital scope

    Part No. Description Price01RSRANA4 Four-In-One Bench Set-up w/20MHz Analog Scope $750.0001RSRDIG4 Four-In-One Bench Set-up w/50Mhz Digital Scope 735.00


    Sweep Function Generator Triple Output Power Supply Digital Multimeter Oscilloscope


    Versatile four essential test equipment pieces packaged in one unit

    RF Generator 100 KHz110 MHz with AM/FM capability

    Frequency Counter High sensitivity with 5 digit display. 100 MHz

    Function Generator 1 Hz1MHz

    Part No. 01GL9004 Price: $1,195.00

    MODEL 9004

    Power Supply 030 VDC, 02 Amp Variable

    3 digit LED display for voltage or current. Current limit LED indicator






  • 36 ELECTRONIX EXPRESS / RSR 900 Hart Street, Rahway, NJ 07065


    Range- 9KHz 3GHz DANL: -138 dBm (Model DSA 1030) -148 dBm (Model DSA 1030A) Min RBW: 100 Hz (Model DSA 1030) 10 Hz (Model DSA 1030A) Trigger Source: Free Run, Video, External Interfaces: USB, LAN, GPIB (optional) RF Input Max: +30dBm External Trigger: 5VTTL Dimensions: 15.7 x 8.8 x 6.3"; wt: 13.7 lbs

    Part No. Description Price01DSA1030 Spectrum Analyzer 3.0 GHz $2,999.0001DSA1030-PA Spectrum Analyzer with $3,659.00 PreAmplifier01DSA1030-TG3 Spectrum Analyzer with $3,499.00 Tracking Gen01DSA1030PATG3 Spectrum Analyzer with $4,159.00 PreAmplifier & Tracking Gen01DSA1030A Spectrum Analyzer 3.0 GHz $4,999.0001DSA1030ATG3 Spectrum Analyzer with $5,998.00 Tracking Gen


    3 GHZ SPECTRUM ANALYZERMODEL GSP830 High resolution TFT color

    display USB and RS232 stan-

    dard, GPIB interface optional

    Outstanding noise floor level (-117dBm @ 600MHz, 3K RBW) and extreme sensitivity for picking up weak signals

    Define own macros in 10 sequence sets while pause, repeat or single run mode can for selected for different applications

    Additional advanced features include auto set, split window, power measurements, pass/fail

    Some major options include tracking generator, battery pack, preamplifier. More listed below.

    Part No. Description Price01GSP830 3 GHZ Spectrum Analyzer $4,100.0001GSP830TG With Tracking Generator 5,200.00FACTORY INSTALLED OPTIONS AT TIME OF PURCHASE01OPT02BAT Battery pack 400.0001OPT03PPM +/- 1 ppm Stability 330.0001OPT04300 300Hz RBW 1,000.0001OPT059120 9KHz and 120KHz RBW 1,000.0001OPT0610100 10KHz and 100KHz RBW 1,000.0001OPT07AMFM AM/FM demodulator & 10KHz, 1,795.00 100KHz RBW01OPT08GPIB GPIB Interface 270.00

    Note: only one of the RBW options can be selectedACCESSORIES01GSC001 Soft Carry Case 200.0001GKT001 General Kit Set 295.0001GKT002 CATV Kit Set 360.0001GKT003 RLB Kit Set 240.0001GSPANTAD Antenna with adapter 40.0001GAP801 Preamplifier 600.0001GKT006 EMI Probe Kit Set 1,435.0001GRA404 Rack Adapter Panel 229.0001GSPCAB 3' RF Cable For External 52.00 Equipment (N Male to N Male)01GTL401 DC Jack to Lighter Plug Cord 36.50

    SPECTRUM ANALYZER Siglents SSA3000X family of spectrum analyzers offer a frequency range of 9 KHz to 2.1 GHz / 3.2 GHz. With their light weight, small size, and friendly user interface, the SSA3000s present a bright easy to read display, powerful and reliable automatic measurements, and plenty of impressive features. Applications are many, but include research and development, education, production, maintenance, and many more.Features: All-Digital IF Technology Frequency Range from 9 kHz up to 3.2 GHz -161 dBm/Hz Displayed Average Noise Level (Typ.) -98 dBc/Hz @10 kHz Offset Phase Noise (1 GHz, Typ.) Total Amplitude Accuracy < 0.7 dB 10 Hz Minimum Resolution Bandwidth (RBW) Standard Preamplifier Up to 3.2 GHz Tracking Generator Kit (Opt.) Reflection Measurement Kit (Opt.) Advanced Measurement Kit (Opt.) EMI Pre-compliance Measurements Kit (Opt.) 10.1 lnch WVGA 1024x600 Display

    Part No. Description Price01SSA3021X 9 kHz~2.1 GHz Spectrum Analyzer $1,595.0001SSA3032X 9 kHz~3.2 GHz Spectrum Analyzer 3,295.0001EMISSA3000X EMI Measurement Kit (software) 559.0001TGSSA3000X Tracking Generator Kit (software) 169.0001AMKSSA3000X Advanced Measurement Kit (software) 465.0001REFISSA3000X Reflect Measurement Kit (software) 429.00

    2.1 GHz / 3.2 GHz


    Part No. Description Price01BK2650A Spectrum Analyzer 3.3GHz $6,450.0001BK2652A Spectrum Analyzer 3.3 GHz 8,450.00 With Tracking Generator01BK2658A Spectrum Analyzer 8.5 GHz 10,995.00

    A compact, light weight and cost-effective spectrum analyzer for quick and precise signal investigations, especially away from the bench. At a weight of only 4 pounds (1.8 kg), it is by far the lightest full-featured spectrum analyzer available, yet it delivers performance and features comparable to a full-size bench spectrum analyzer. Impressive 4 hour battery life; easy-to-replace rechargeable Lithium-Ion battery Fast sweep speed, minimum 10 ms, to help locate and identify elusive,

    transient interference signals DANL (displayed average noise level) of -127 dBm Large easy-to-read color display, 640 x 480 resolution Measurement functions: channel/adjacent channel power, occupied

    bandwidth, electric and magnetic field strength Convenient Auto tune function PC Software for remote control and documentation of measurement

    results (included) Conveniently store measurement results and screen shots in bitmap

    format to USB flash drive

  • Call Toll Free: 1 (800) 972-2225 In NJ: (732) 381-8020 Fax: (732) 381-1006 (732) 381-1572 37

    An affordable, but full function spectrum analyzer and aspecially (designed for education) training module. Together with a PC an instructor may present a fundamental RF Communication Course via Powerpoint, and controlexperiments (which come with the trainer), simultaneously.A VGA output enables images to be transferred to a projector, or larger screen display.

    GSP-730 Spectrum Analyzer Frequency Range: 150KHz ~ 3GHz Autoset funtion RBW ranges, 30KHz, 100KHz, 300KHz, 1MHz ACPR/CHPW/OCBW measurement Built in limit line, 5 markers, split window function 3 different trace colors, 5.6" TFT LCD display USB and RS232, and VGA output

    GRF-1300 Training Module for use with Spectrum Analyzer Baseband Signal: sine, triangle, square. Frequency range: 0.1 ~ 3MHz RF frequency: 870 ~ 920MHz AM/FM modulation 5 programmable on/off switches and 5 test points to simulate 8 failure conditions for trouble shooting USB enables remote control 10 experiments included


    Part No. Description Price 01GSP730 3 GHz Spectrum Analyzer $899.0001GRF1300 Training Module for use 359.00 with GSP-730



    MODELS: DSA815/DSA832/DSA875

    Part No. Description Price 01DSA815 1.5 GHz Model $1,295.0001DSA815TG 1.5 GHz w/ Tracking Generator $1,495.0001DSA832 3.2 GHz Model $6,499.00 01DSA832TG 3.2 GHz w/ Tracking Generator $8,098.0001DSA875 7.5 GHz Model $7,999.0001DSA875TG 7.5 GHz w/ Tracking Generator $9,598.00 Options01PA-DSA832 Preamplifier for DSA832 $599.0001PA-DSA875 Preamplifier for DSA875 $599.0001TX1000 Demonstrator Board w/ Built in $945.00 1GHz Oscillator, mixer, filters & amp 01RFATKIT RF Alternator Kit-6db(1);10db(2) $499.0001RFADKIT RF Adapter Kit, 9 diff adapters $299.0001AMK815 Adv. Measurements Kit for DSA815 $549.0001EMI815 EMI Filter & Quasi Peak Detector $659.0001RMSA815 Rack Mounting Kit for DSA815 $374.00 01VB1020 800MHz to 2GHz VSWR Bridge $659.00 including DSA800-VSWR Software License01VB1080 2GHz to 8GHz VSWR Bridge $699.00 including DSA800-VSWR Software License

    The DSA800 Series is a compact and light Spectrum Analyzer with premium performance for portable applications. The use of digital IF (intermediate frequency) technology guarantees reliability and performance to meet the most demanding RF applications.

    The very large display (20.3 cm / 8") of the Rigol DSA815 Spectrum Analyzer with a resolution of 800x480pixels provides a very good overview over all its comfortable functions like Auto Tune, Auto Range, Auto Scale and Auto Couple. These functions enable the analyzer to acquire signals and match parameters automatically, instead of the manual process necessary with a traditional analyzer.

    The Rigol Spectrum Analyzers have a sophisticated and easy to use user interface and offers multiple functions for all tasks. The menu navigation is very intuitional in use and all functions and parameters are easy to reach because of the graphical interface.

    Frequency Range: 9 kHz to 1.5 GHz/3.2GHz/7.5GHz Typical -135 dBm Displayed Average Noise Level (DANL) -80 dBc/Hz @10 kHz offset Phase Noise Total Amplitude Uncertainty

  • 38 ELECTRONIX EXPRESS / RSR 900 Hart Street, Rahway, NJ 07065

    3GHz SPECTRUM ANALYZERMODEL GSP-9300GSP-9300 is a light, compact and high C/P ratio 3GHz spec-trum analyzer. The GSP-9300 frequency range stretches from 9kHz to 3GHz and features many functions such as radio frequency and power measure-ment, 2FSK digital communica-tions analysis, EMC pretest, and active component P1dB point measurement, etc. It can support the fast sweep speed up to 307us. It is the ideal instrument for various application fields such as the basic operation of R&D, research and school lecture, engineering maintenance and test for mass production.

    This spectrum analyzer is suitable for automatic test systems and ve-hicle mounted operation. The GSP-9300 spectrum analyzer is very us-er-friendly. All frequently used functions can be applied quickly through function keys and five languages (English, Russian, Traditional Chinese, Simplified Chinese and Japanese) are available for user interface.

    Features: Frequency Range: 9kHz ~ 3GHz High Frequency Stability: 0.025ppm 3dB RBW: 1Hz ~ 1MHz 6dB EMI Filter: 200Hz, 9kHz, 120kHz, 1MHz Phase Noise: -88dBc/Hz @1GHz, 10kHz Offset Built-in Measurement Functions: 2FSK Analysis, AM/FM/ASK/

    FSK Demodulation & Analysis, EMC Pre-test, P1dB point, Har-monic, Channel Power, N-dB bandwidth, OCBW, ACPR, SEM, TOI, CNR, CTB, CSO, Noise Marker, Frequency Counter, Time Domain Power, Gated Sweep

    Built-in Spectrogram and Topographic Display Modes 886MHz IF Output for Users Extended Applications Remote Control Interface: LAN, USB, RS-232, GPIB (Optional) Built-in Preamplifier, 50dB Attenuator, and Sequence Function Optional 6GHz Power Sensor, Tracking Generator, Battery Back Tracking Generator Options is Installed at Factory When Base

    Unit is Ordered.

    Part No. Description Price 01GSP9300 3GHz, Spectrum Analyzer $4,545.0001GSPTG93 Tracking Generator $1,450.00Accessories01GSP9300BAT DC Battery Pack $240.0001GSPPWS06 RF Power Sensor 6GHz $2,915.0001GSP9300GPIB GPIB Interface $300.00

    Global Specialties Model GS-PCLA-32 is a 32 Channel, PC-Based Logic Analyzer. The logic analyzer is great for space savings and is easy on the budget. The GS-PCLA-32's graphic user interface is easy to use and allows users to instantly, and accurately measure signals with minimal instruction. Perfect for education, R&D and hobbyists.

    Part # 01GSPCLA32 Price: $640.00



    analyzer Easy to use; makes

    debugging convenient Provides a PC-LINK

    interface to observe and print waveforms using your PC

    5.6" color TFT display

    SPECIFICATIONS 250MHz timing and 100MHz state analysis (LA2025) 500MHz timing and 200MHz state analysis (LA2050) Saved Waveform: 512K x 32 (LA2025) Saved Waveform: 1M x 32 (LA2050) Memory: 2M (LA2025), 4M (LA2050) Skew: Typically less than 2.0 ns, maximum: 3.0 ns Speed of scanning: 5s/div 14 ns/div Trigger channel: 32CH (8CHx4) DPI: 1 bit Trigger signal: 5ns Various ways to collect data: Single, Run, Autostore Size: 12.2 x 2.8 x 5.9 (inches) Weight: 5 lbs. Power: 90240 VAC, 5060 Hz Package contents: Unit; data pods (4); lead sets (4), test

    probe (36); AC cord; USB cable; CD and manual

    Part No Price01LA2025 $1,850.0001LA2050 2,695.00


    Operates as a stand-alone unit or connect to computer via USB . Unit comes complete with all necessary software, data pods and logic grabbers. 32 iput channels in 4 groups with 8 channels for each group 4 groups may be combined in three different configurations Current limit and over voltage protection each channel name-definable Internal/external clock, data search, zoom, cursor, simulation, sequence adjusting and keyboard operation features.

    Part # 01GLLA3600 Price: $2,899.00



  • Call Toll Free: 1 (800) 972-2225 In NJ: (732) 381-8020 Fax: (732) 381-1006 (732) 381-1572 39


    frequency, period, totalize and self check

    10MHz OSC out Dual voltage supply

    110VAC / 220VAC

    Frequency: Channel A: 10Hz 100MHz Channel B: 100MHz 1.3GHzPeriod: 0.1S to 0.1STotalize: 10Hz to 10MHz (1 count resolution)Dimension: 9.5" x 2.8" x 11.5"Weight: ~ 4 lbs.

    Part No. 01FCMS6100 Price: $155.00


    2.7 GHz FREQUENCY COUNTERMODEL FC-2700 2.7 GHz bench type frequency count-

    er. High sensitivity for VHF and UHF

    frequency measurement. Useful for CB bandwith.

    Frequency, period, data hold, relative measurement, max, min, average.

    8 digit LCD display. Power supply from battery or AC adapter (Optional). RS232 serial interface. TCXO temperature compensated crystal oscillator time base for

    high stability and accuracy.Part No. Description Price01FC2700 Frequency Counter $260.0001A26-8016 BNC Female to "N" Male Adapter 4.5001NN23 Probe with Double N Coaxial Connector 19.5016DFC9 Adaptor 9V DC 6.50


    Part No. Description Price01FC1856 3.5 GHz Frequency Counter $540.00

    Portable instrument for field use Wide measuring range from 3.5GHz Bright 9-digit LED display High sensitivity for VHF and UHF

    frequencies Period mode for accurage low frequency

    measurements Totalize mode permits counting of individual events Accurate TCXO timebase

    MODEL 1856D3.5GHZ


    2.5 GHz FREQUENCY COUNTERMODEL FC-2500 Handheld instrument ideal for VHF and UHF frequencies. 3 ranges 2500 MHz, 500 MHz, 10 MHz. 8 digit LCD display. Frequency, period, data hold, max, min, average. Best resolution 0.1Hz with 50mV sensitivity. Battery operation or AC power. Battery included. Optional: Antenna with BNC connectorPart No. Description Price01FC2500 Frequency Counter $155.0001AT20 Antenna w/BNC 6.9516DFC9 Adaptor 9V DC 6.50

    FREQUENCY COUNTERSMODELS GFC-8131H, GFC-8270H Frequency, period

    and RPM High resolution at

    both low and high 10mV RMS high


    Part No. Description Price01FC8131 1.3GHz Model $275.0001FC8270 2.7GHz Model 355.00

    10nHz resolution for 1 Hz

    Self diagnostic Variable trigger

    level control Display hold


    FREQUENCY COUNTERMODEL FC-8010 Range: 1 Hz - 120MHz, 2 ranges Accuracy: 1Digit + Time Base Accuracy Max. Input: 5 Vrms for 50 ohm, 150 Vrms

    for 1M ohm Impedance: 1M ohm, 35 pF 8 Digit Display with overflow indicators Gate time switch selectable from 0.1

    second to 10 seconds.

    Part No. 01FC8010 Price: $185.00


    MODEL FC-8150U

    Part No. 01FC8150U Price: $320.00

    Frequency measuring range : 0.1Hz to 100MHz in A, B input 80MHz to 1.5GHz in C input

    Period and Total measurement for input A

    Time interval and Ratio measurement for input A and B

    Trigger level adjustment for input A Separate and Common mode selectable for input A

    and B Slope mode selectable for input A and B 9 Digit display with 0.01 mHz resolution in 1 Sec. RS-232C serial interface function for communicating with computer High sensitivity External reference input function( Higher than 1.5

    Vrms) Reciprocal technique for high resolution at low counting frequencies

  • 40 ELECTRONIX EXPRESS / RSR 900 Hart Street, Rahway, NJ 07065


    60, 100, 250 MHZB.W. DC to 60/100/150 MHz. BNC to IC Test Hook, with selectable X1, X10 switch. Includes 1 ea. probe, spring hook, ground lead, insulating tip, measuring tip, IC tip, adjusting tool, chan-nel identifier clips.

    Part No. Description 1-9 10-99 100+05SPAK220 60 MHz $13.95 $11.95 $9.9505SPAK510 100 MHz $17.95 $15.95 $13.9505SPGL250 250 MHz 21.95 19.95 17.95




    Part No. Description Price 01INSTK2072E 70MHz 2 channel DSO $ 670.0001INSTK2074E 70MHz 4 channel DSO $ 1,150.0001INSTK2102E 100MHz 2 channel DSO $ 920.0001INSTK2104E 100MHz 4 channel DSO $ 1,530.0001INSTK2202E 200MHz 2 channel DSO $ 1,300.0001INSTK2204E 200MHz 4 channel DSO $ 1,570.00

    70MHz, 100MHz, 200MHz models either 2 or 4 channel

    Rapid refresh. waveform update rate 120,000 wfm/s

    1Gsa/s real-time sampling rate each channel (2 ch models)

    1Gsa/s max real-time sample rate (each channel)

    10M memory depth (selectable based on speed needs)

    VPO waveform display technology 8 WVGA TFT LCD display FFT, hi-lo functions, segmented memory / waveform search Data log up to 100 hrs, trigger and decode functions Remote internet storage, multi language menu


    Siglent's SDS1000X series employs a new generation of SPO technology. With excellent signal fidelity, background noise is lower than similar products in the industry. The SDS1000X has a minimum vertical input range of 500uV/div, an innovative digital trigger system with high sensitivity and low jitter, and a waveform capture rate of 60,000 frames/sec. Add an impressive array of measurement and math capabilities, options for an integrated 25 MHz arbitrary waveform generator, as well as serial decoding, and the features and high-performance of the SDS1000X oscilloscopes cannot be matched at anywhere at this price.

    Features: 100MHz, 200MHz bandwidth models Real-time sampling rate up to 1GSa/s Record length of 14Mpts Waveform capture rate is 60,000 wfms/s New generation of SPO technology Supports 256-level intensity grading and color temperature

    display Intelligent trigger: Edge, Pulse, Window, Runt, Interval, Time

    out (Dropout), Pattern Serial bus triggering and decode, supports protocols IIC,

    SPI, UART, RS232, CAN, LIN Video triggers and supports HDTV Large 8 inch TFT-LCD display with 800 * 480 resolution,

    Abundant interfaces: USB Host, USB Device (USBTMC), LAN (VXI-11), Pass / Fail

    Part No. Description Price01SDS1102X 100MHz Oscilloscope $499.0001SDS1102X-S 100MHz Oscllscpe + Wavfrm Gen $759.0001SDS1202X 200MHz Oscilloscope $659.0001SDS1202X-S 200MHz Oscllscpe + Wavfrm Gen $899.00


    Part No. 01BK2190E Price: $399

    It features an upgraded high 800 x 480 resolution, 7-inch TFT color display and a LAN interface (standard).Additionally, the 2190E offers incredible measurement functionality that you wouldn't expect from an entry-level oscilloscope. For example, the 2190E boasts 40,000 points of waveform memory, versatile triggering capabilities and advanced tools including a digital filter with adjustable limits, pass/fail testing, and waveform recorder mode. Downloadable PC software is available and allows users to control all oscilloscope parameters via a PC. Packed with features and engineered to do more, the new 2190E is the ideal tool for instructors, students, engineers, technicians and hobbyists alike.


    100 MHz bandwidth, 1 GSa/s sample rate Large, 7 widescreen color display with 800 x 480

    resolution offers a significantly larger viewing area than typical economy oscilloscopes (5.7)

    32 automatic measurements FFT plus four additional math functions PC software that lets you remotely control the digital

    storage oscilloscope and capture, save, and analyze waveform data

    GPIB connectivity with optional USB-to-GPIB adapter (model AK40G)