Panasonic Glp21 Chassis TX-32lx60f 32lx60p 26lx60f 26lx60p Sm

Click here to load reader

  • date post

    21-Jan-2016
  • Category

    Documents

  • view

    118
  • download

    4

Embed Size (px)

Transcript of Panasonic Glp21 Chassis TX-32lx60f 32lx60p 26lx60f 26lx60p Sm

  • Service ManualColour LCD Television

    TX-32LX60FTX-32LX60PTX-26LX60FTX-26LX60P

    GLP21 ChassisSpecifications

    (Informations in brackets [ ] refers to models 26)

    Power Source: 220-240V AC, 50HzPower Consumption: 143W [90W]Stand-by PowerConsumption: 1W [1W]

    Aerial Impedance: 75 unbalanced, Coaxial TypeReceiving System: PAL-I, B/G, D/K,

    SECAM B/G, D/K, L/LPAL-525/60 (AV only)M.NTSC (AV only)NTSC (AV only)

    Receiving Channels:VHF E2-E12 VHF H1-H2 (ITALY)VHF A-H (ITALY) VHF R1-R2VHF R3-R5 VHF R6-R12UHF E21-E69 CATV (S01-S05)CATV S1-S10 (M1-M10) CATV S11-S20 (U1-U10)CATV S21-S41 (Hyperband)

    Operating Conditions:Temperature: 5C 35CHumidity: 5% 90% RH (non-condensing)Intermediate Frequency:Video/AudioVideo 38,9MHz, 33,9MHz

    Audio 33,4MHz (B/G), 33,16MHz (A2)33,05MHz (NICAM B/G, D/K, L)32,4MHz (D/K), 32,66MHz (CZ STEREO)40,4MHz (L), 39,75Mhz (LNICAM),

    Colour 34,47MHz (PAL)34,5MHz, 34,65MHz (SECAM)38,3MHz, 38,15MHz (SECAM L)

    Terminals:AV1 IN Video (21 pin) 1V p-p 75

    Audio (21 pin) 500mV rms 10kRGB (21 pin) 0,7V p-p 75

    AV1 OUT Video (21 pin) 1V p-p 75Audio (21 pin) 500mV rms 1k

    AV2 IN Video (21 pin) 1V p-p 75Audio (21 pin) 500mV rms 10kRGB (21 pin) 0,7V p-p 75S-video IN Y: 1V p-p 75(21-pin) C:0,3V p-p 75

    AV2 OUT Video (21 pin) 1V p-p 75Audio (21 pin) 500mV rms 1k

    AV3 IN S-Video IN Y: 1V p-p 75(4-pin) C:0,3V p-p 75Audio (RCAx2) 500mV rms 10kVideo (RCAx1) 1V p-p 75

    HDMI1, HDMI2 Type A Connector

    COMPONENT YUV Video (RCAx3) Y:1V p-p 75Pb, Pr: 0,7V p-p 75

    AUDIO IN Audio (RCAx2) 500mV rms 10kLCD screen: L5EDD8Q00019 [L5EDD6Q00013]

    1366 x 768 XGA, 16:9Visible Diagonal 800mm [660mm]

    Audio Output: 2x10W RMS 8 impedance

    Headphones: 3,5mm, 8 ImpedanceAccessories supplied : Remote Control

    2 x R6 (UM3) Batteries

    Dimensions:Height: Width: Depth:

    Including TV stand 615mm 791mm 301mm[525mm] [657mm] [301mm]

    TV set only 563mm 791mm 107mm[473mm] [657mm] [107mm]

    Net weight: 19kg [14,5kg]

    Specifications are subject to change without notice.Weights and dimensions shown are approximate.

    ORDER No. PCZ0603015CE

  • CONTENTSSAFETY PRECAUTIONS ........................................... 3

    GENERAL QUIDE LINES...................................... 3

    TOUCH CURRENT CHECK............................... 3

    PREVENTION OF ELECTROSTATIC DISCHARGE

    (ESD) TO ELECTROSTATICALLY SENSITIVE (ES)

    DEVICES .................................................................... 4

    ABOUT LEAD FREE SOLDER (PBF)......................... 5

    SUGGESTED PB FREE SOLDER........................ 5

    SERVICE HINTS ........................................................ 6

    CHASSIS BOARD LAYOUT ....................................... 7

    SETTING INSPECTION.............................................. 7

    SELF-CHECK ............................................................. 8

    ADJUSTMENT METHOD ........................................... 9

    BLOCK DIAGRAMS.................................................. 10

    PARTS LOCATION................................................... 13

    REPLACEMENT PARTS LIST.................................. 14

    SCHEMATIC DIAGRAMS......................................... 25

    A-BOARD - 3,3V SUPPLY .................................. 26

    A-BOARD - 3,3V HDMI SUPPLY ........................ 26

    A-BOARD - 5V SUPPLY ..................................... 27

    A-BOARD - 33V SUPPLY ................................... 27

    A-BOARD - 12V SUPPLY ................................... 28

    A-BOARD - 8V SUPPLY ..................................... 28

    A-BOARD - STBY 3,3V SUPPLY ........................ 29

    A-BOARD - STBY 1,8V SUPPLY ........................ 29

    A-BOARD - PSU CONNECTION ........................ 30

    A-BOARD - AV1 .................................................. 31

    A-BOARD - AV2 .................................................. 31

    A-BOARD - AV3 .................................................. 32A-BOARD - YUV.................................................. 32

    A-BOARD - VIDEO SWITCH............................... 33

    A-BOARD - QLINK .............................................. 33

    A-BOARD - HDMI_CEC ...................................... 34

    A-BOARD - LCD PANEL CONNECTOR, PANEL 5V

    SUPPLY .............................................................. 34

    A-BOARD - TUNER CONNECTION.................... 35

    A-BOARD - AUDIO AMPLIFIER.......................... 36

    A-BOARD - AUDIO MATRIX ............................... 37

    A-BOARD - HDMI AUDIO DAC........................... 38

    A-BOARD - HEADPHONE AMPLIFIER .............. 39

    A-BOARD - KEYSCAN........................................ 40

    A-BOARD - SERVICE ......................................... 40

    A-BOARD - IR LED ............................................. 41

    A-BOARD - PROTECTION ................................. 41

    A-BOARD - LEVEL SHIFTER ............................. 42

    A-BOARD - IRD PROTECTION .......................... 42

    A-BOARD - EAROM............................................ 43

    A-BOARD - INVERTER....................................... 43

    A-BOARD - BACKLIGHT..................................... 44

    A-BOARD - VCT69P ........................................... 45

    A-BOARD - HDMI................................................ 46

    H-BOARD............................................................ 47

    B-BOARD ............................................................ 48

    V-BOARD ............................................................ 49

    K-BOARD ............................................................ 50

    P-BOARD ............................................................ 51

    KEY CONTROL................................................... 52

    CONDUCTOR VIEWS .............................................. 53

    2

  • Safety PrecautionsGeneral Guide Lines

    1. When servicing, observe the original lead dress. If a sor damaged by the short circuit.

    2. After servicing, see to it that all the protective devicesinstalled.

    3. After servicing, make the following touch current chec4. Always ensure panel TKKL5290 is correctly replaced

    Touch-Current Check1. Plug the AC cord directly into the AC outlet. Do not us2. Connect a measuring network for touch currents betw

    ground such as a water pipe, as shown in Fig. 2.3. Use Leakage Current Tester (Simpson 228 or equival4. Check each exposed metallic part, and measure the v5. Reserve the AC plug in the AC outlet and repeat each6. The potential at any point (TOUCH CURRENT) expre

    For a. c.: U1 = 35 V (peak) and U2 = 0.35 V (peak);For d. c.: U1 = 1.0 V,Note:The limit value of U2 = 0.35 V (peak) for a. c. and U1 2.0 mA d. c.The limit value U1 = 35 V (peak) for a. c. correspond kHz.

    7. In case a measurement is out of the limits specified, tbe repaired and rechecked before it is returned to the

    F

    TOAPPLIANCESEXPOSEDMETAL PARTS

    Resistance values in ohms ()

    R

    RS=500

    COLDWATER PIPE(EARTH GROUND)

    V: Voltmetr or oscilloscope(r.m.s. or peak reading)

    Measuring networ

    Input resistanceInput capacitanFrequency rang

    NOTE Appropriate measures should be taken thort circuit is found, replace all parts which have been overheated

    such as insulation barriers, insulation papers shields are properly

    ks to prevent the customer from being exposed to shock hazards.before returning to customer (see Fig.1).

    e an isolation transformer for this cheen each exposed metallic part on t

    ent) to measure the potential acrossoltage at each point. of the above measure.ssed as voltage U1 and U2, does no

    = 1.0 V for d. c. correspond to the va

    to the value 70 mA (peak) a. c. for fre

    here is a possibility of a shock hazar customer.

    Fig. 2

    ig. 1

    3

    0=500

    CS=500F

    10k

    0.022FU1

    k for TOUCH CURRENTS

    : 1Mce: 200pFe: 15Hz to 1MHz and d.c.respectively

    o obtain the correct value in case of non-sinusoeck.he set and a good earth

    the measuring network.

    t exceed the following values:

    lues 0.7 mA (peak) a. c. and

    quencies greater than 100

    d, and the equipment should

    V

    idal waveforms

    U2 (V)

  • About lead free solder (PbF)Note: Lead is listed as (Pb) in the periodic table of elemenIn the information below, Pb will refer to Lead solder, and The Lead Free Solder used in our manufacturing process That is Tin (Sn), Silver (Ag) and Copper (Cu) although oth

    This model uses Pb Free solder in its manufacture due towed suggest the use of Pb free solder as well, although PPCBs manufactured using lead free solder will have the P

    stamped on the back of PCB.

    Caution Pb free solder has a higher melting point than sta

    higher. Please use a high temperature soldering Pb free solder will tend to splash when heated to

    If you must use Pb solder, please completely remapplying Pb solder. If this is not practical, be sure

    After applying PbF solder to double layered boarflow onto the opposite side. (see Fig.3)

    Suggested Pb free solder There are several kinds of Pb free solder available for purHowever, Sn+Cu (tin, copper), Sn+Zn+Bi (tin, zinc, bismutts. PbF will refer to Lead Free Solder. and discussed below is (Sn+Ag+Cu). er types are available.

    environmental conservation issues. For service and repair work,b solder may be used.bF within a leaf Symbol

    ndard solder. Typically the melting point is 50 ~ 70 F (30~40C)iron and set it to 700 20 F (370 10 C).o high (about 1100 F or 600 C).ove all of the Pb free s