NOVINOX® PAT30 ECO ZINC FREE PHOSPHATE PAT30 046D...H 7.8 1.2 ISO 77-9 Siee residue m 0.05 max ISO...

1
Nominal value Tolerance (+/-) Oil absorption (cm 3 / 100 g) 26 5 ISO 787-5 pH 7.8 1.2 ISO 787-9 Sieve residue - 45 μm (%) 0.05 max ISO 787-7 Density (g / mL) Typ. 2.2 ISO 8130-2 Recommended shelf life: 5 years Solvent Based Performance Short oil alkyd Medium/long oil alkyd High solid epoxy nr 2K epoxy nr Epoxy ester nr PU Water Based Performance Water reducible alkyd nr Alkyd emulsion Epoxy ester 2K epoxy Acrylics/modified acrylics Specialty coatings Wash primer nr Coil coating * Powder coating NOVINOX® PAT30 MAGNESIUM PHOSPHATE DESCRIPTION NOVINOX® PAT30 is a corrosion inhibiting pigment that allows the formulation of enviromentally friendly paints. It is a stable and non-hygroscopic white powder, it is easily dispersed. NOVINOX® PAT30 is compatible with solvent and water based resins. It shows the best performance in solvent borne alkyd systems. NOVINOX® PAT30 is also used in coil coatings in assocation with ion exchanged silica. Excellent: Good: Possible: Not yet tested: ___ Not recommended: nr *: Normally used in association with other pigments (ex: ion exchanged Silica) ZINC FREE PHOSPHATE PAT30 046D Best performances are obtained with a typical loading of 5 to 12 % by weight on the total formulation and a low PVC. The information presented herein is true and accurate to the best of our knowledge, but without any guarantee unless explicitly given. Since the conditions of use are beyond our control we disclaim any liability, including for patent infringement, incurred in connection with the use of these products, data or suggestion. Supersedes: PAT30 035D 01/01/2019 FORM_QSHE/C&A 754 v0.06 Technical data Formulators Guidelines 45/49, Chaussée Jules César F-95250 BEAUCHAMP [email protected] +33 1 30 40 57 57 WWW.SNCZ.COM ECO

Transcript of NOVINOX® PAT30 ECO ZINC FREE PHOSPHATE PAT30 046D...H 7.8 1.2 ISO 77-9 Siee residue m 0.05 max ISO...

Page 1: NOVINOX® PAT30 ECO ZINC FREE PHOSPHATE PAT30 046D...H 7.8 1.2 ISO 77-9 Siee residue m 0.05 max ISO 77-7 Densit (g / m Typ. 2.2 ISO 1302 Recommended shel lie 5 years Solent ased Perormance

Nominal value Tolerance (+/-)

Oil absorption (cm3 / 100 g) 26 5 ISO 787-5pH 7.8 1.2 ISO 787-9Sieve residue - 45 μm (%) 0.05 max ISO 787-7Density (g / mL) Typ. 2.2 ISO 8130-2

Recommended shelf life: 5 years

Solvent BasedPerformance

Short oil alkyd

Medium/long oil alkyd High solid epoxy nr

2K epoxy nr

Epoxy ester nr

PU

Water BasedPerformance

Water reducible alkyd nr

Alkyd emulsion

Epoxy ester

2K epoxyAcrylics/modified acrylics

Specialty coatingsWash primer nr

Coil coating *

Powder coating

NOVINOX® PAT30 MAGNESIUM PHOSPHATE

DESCRIPTION

NOVINOX® PAT30 is a corrosion inhibiting pigment that allows the formulation of enviromentally friendly paints. It is a stable and non-hygroscopic white powder, it is easily dispersed.NOVINOX® PAT30 is compatible with solvent and water based resins. It shows the best performance in solvent borne alkyd systems.NOVINOX® PAT30 is also used in coil coatings in assocation with ion exchanged silica.

Excellent: Good: Possible:

Not yet tested: ___ Not recommended: nr

*: Normally used in association withother pigments (ex: ion exchanged Silica)

ZIN

C F

RE

EP

HO

SP

HA

TE

PAT3

0 0

46D

Best performances are obtained with a typical loading of 5 to 12 %by weight on the total formulation and a low PVC.

The information presented herein is true and accurate to the best of our knowledge, but without any guarantee unless explicitly given. Since the conditionsof use are beyond our control we disclaim any liability, including for patent infringement, incurred in connection with the use of these products, data or suggestion.

Supersedes: PAT30 035D01/01/2019FORM_QSHE/C&A 754 v0.06

Technical data

Formulators Guidelines

45/49, Chaussée Jules César F-95250 BEAUCHAMP

[email protected] +33 1 30 40 57 57

WWW.SNCZ.COM

ECO