MTC Transient Voltage Suppressor - Motocraft Voltage Suppressor-all.pdf · MTC Transient Voltage...
Transcript of MTC Transient Voltage Suppressor - Motocraft Voltage Suppressor-all.pdf · MTC Transient Voltage...
MTC Transient Voltage Suppressor
Operating Temperature : -55 to + 125
Storage Temperature : -55 to + 150 Packaging Method : Tape & Reel(per Specifications) Features: Full compliance on : IEC 61000-4-2 (ESD) ±15kV (air) ± 8kV (contact) IEC 61000-4-4 (EFT) 40A 5/50ns IEC 61000-4-5(Lightning) 8/20μs Low voltage operation : first in the industry with the 1.2-1.5V operating level ESD Protection.
Off-State Capacitance as low as 1.0 Pf Broad micro-packaging platform options (leaded or leadless) offering flexibility to customer with general and custom needs High level of integration and functionality All products are RoHS directive compliant
Part Number Code N 05 1 AD 52 (1) (2) (3) (4) (5)
(1)N: Normal (2)05: 5V (3)1: 1-Line (4)AD: SOD (5)52: SOD-523
ELECTRIACL CHARACTERISTICS
Raiongs at 25 ambient temperature unless otherwise specified.
Characteristics Symbol Minimum Typical Maximum Unit
Reverse Stand-off Voltage VRWM 5 V
Reverse Breakdown Voltage (It=mA) VBR 6 V
Reverse Leakage Current (VRWM=5V,T=25) IR 5 μA
Forward Voltage (IF=10mA) VF 0.8 V
Clamping Voltage (Ipp=5A, tp=8/20μs) VC 9.5 V
Clamping Voltage (Ipp=16A,tP=8/20μs) VC 12.5 V
Junction Capacitance (VR=0V,f=1MHz) Ci 150 pF
MTC Transient Voltage Suppressor
Storage Temperature : -55 to + 125
Packaging Method : Tape & Reel(per Specifications)
Features: Full compliance on : IEC 61000-4-2 (ESD) ±15kV (air) ± 8kV (contact) IEC 61000-4-4 (EFT) 40A 5/50ns IEC 61000-4-5(Lightning) 8/20μs Low voltage operation : first in the industry with the 1.2-1.5V operating level ESD Protection. Off-State Capacitance as low as 1.0 pF Broad micro-packaging platform options (leaded or leadless) offering flexibility to customer with general and custom needs High level of integration and functionality All products are RoHS directive compliant
APPLICATION General-purpose downstream ESD protection high frequency analog signals and high-speed serial date transmission for ports inside : ※PC-/Notebook USB2.0/IEEE1394 Ports ※Cellular phone and PCS mobile handsets ※DVI interfaces ※Cordless telephones ※Wireless date (WAN/LAN) systems ※PDAs
Part Number Code L 05 4 B T 2 6
(1) (2) (3) (4) (5) (6)
(1)L: Low pF (2)05: 5V (3)4: 4-Line (4)BT: (5)2: USB (6)6: 6 pin
ELECTRICAL CHARACTERISTICS TC=25 unless otherwise specified
PARAMETER TEST CONDITIONS SUMBO MIN TYP MAX UNIT
Pin capacitance to ground, Pins 1,3,4,6
Vdc = 0V ; f = 1MHz Pin 5 = + 3.0V CVO - 1.0 - pF
Diode reverse leakage current, Pins 1,3,4,6 to ground
V = +3.0V Ilkg - - 100 nA
Zener diode capacitance to ground, Pin 5 to 2
Vdc = 0V ; f = 1MHz Pin 5 = + 3.0V Czener - 40 - pF
Zener diode breakdown voltage, Pin 5 to 2 I=1mA VBRVO 6 - 9 V
Forward voltage VF - 0.7 - V
MTC Transient Voltage Suppressor
Operating Temperature : -55 to + 150 Storage Temperature : -55 to + 150
Packaging Method : Tape & Reel(per Specifications)
Features: Full compliance on : IEC 61000-4-2 (ESD) ±15kV (air) ± 8kV (contact) IEC 61000-4-4 (EFT) 40A 5/50ns IEC 61000-4-5(Lightning) 8/20μs Low voltage operation : first in the industry with the 1.2-1.5V operating level ESD Protection.
Off-State Capacitance as low as 1.0 Pf Broad micro-packaging platform options (leaded or leadless) offering flexibility to customer with general and custom needs High level of integration and functionality All products are RoHS directive compliant APPLICATION ※Cordless phones ※Cellular phones & accessories ※Audio/Video inputs ※Portable electronics (Digital Cameras, MP3 Players, ect.) ※Networks
Part Number Code N 05 5 AT 56 (1) (2) (3) (4) (5)
(1)N: Normal (2)05: 5V (3)5: 5-Line (4)AT: SOT (5)56: 563-6
ELECTRICAL CHARACTERISTICS PARAMETER SYMBOL CONDITIONS MIN. TYP. MAX. UNIT
Reverse Breakdown Voltage VBR It=1mA 6.15 6.5 7.15 V
Clamping Voltage VC IPP=1A - - 9 V
Maximum Peak Pulse Current IPP tp= 8/20μs - - 3.5 A
Reverse Leakage Current IR VRWM = 5V - 10 35 μA
Diode Capactiance CD VR = 0V,f = 1MHz - 22 28 pF
Differential Resistance rdiff Ir=1mA 20 100 Ohms
MTC Transient Voltage Suppressor
Storage Temperature : -55 to + 150
Packaging Method : Tape & Reel(per Specifications)
Features: Full compliance on : IEC 61000-4-2 (ESD) ±15kV (air) ± 8kV (contact) IEC 61000-4-4 (EFT) 40A 5/50ns IEC 61000-4-5(Lightning) 8/20μs Low voltage operation : first in the industry with the 1.2-1.5V operating level ESD Protection. Off-State Capacitance as low as 1.0 Pf Broad micro-packaging platform options (leaded or leadless) offering flexibility to customer with general and custom needs High level of integration and functionality All products are RoHS directive compliant
Part Number Code UL 05 2 AT 52 (1) (2) (3) (4) (5)
(1)UL: Ulira low (2)05: 5V (3)2: 2-Line (4)AT: SOT (5)52: SOT-523
ELECTRICAL CHARACTERISTICS PARAMETER SYMBOL CONDITIONS MIN. TYP. MAX. UNIT
Zener Voltage VZ IZ =5mA 5.4 - 5.75 V
Reverse Current IR VR = 2.5V - - 1.00 μA
Operating Resistance ZZ IZ =5mA - - 60 Ω
Rising Operating Resistance ZZK IZ =0.5mA - - 200 Ω
Capactiance Between Terminals CT f =1MHz, VR =5V - 4 - pF
MTC Transient Voltage Suppressor
Storage Temperature : -55 to + 150
Packaging Method : Tape & Reel(per Specifications)
Features: Full compliance on : IEC 61000-4-2 (ESD) ±15kV (air) ± 8kV (contact) IEC 61000-4-4 (EFT) 40A 5/50ns IEC 61000-4-5(Lightning) 8/20μs Low voltage operation : first in the industry with the 1.2-1.5V operating level ESD Protection. Off-State Capacitance as low as 1.0 Pf Broad micro-packaging platform options (leaded or leadless) offering flexibility to customer with general and custom needs High level of integration and functionality
APPLICATION ※RS-232,RS-423 data lines ※Cellular phone terminals ※Audio/Video inputs ※Portable electronics ※Networks
Part Number Code
N 05 2 AT 23 (1) (2) (3) (4) (5)
(1) N: Normal (2) 05: 5V (3) 2: 2-Line (4) AT: SOT (5) 23: SOT-23
ELECTRICAL CHARACTERISTICS
PART NUMBER
MARKING CODE
REVERSE STAND-OFF VOLTAGE
Min VBR
@ 1mA
Max. Clamping @ IPP =
1A
Max Peak Pulse
Current2
Leakage Current @ VRWM
Capacitance @ 0V,1MHz
Pin 1-2
Capacitance @0V, 1MHz Pin 1-3 & 2-3
VRWM BV(min) VC(typ.) IPP IR Cj (max.) Cj
Volts Volts Volts Amps μA pF pF
ND02AT23 T5 5 6 9.5 17 20 250 300
MTC Transient Voltage Suppressor DM Series
DEVICE RATINGS AND SPECIFICATIONS
Part Number
Allowable Continuous Working Voltage
Breakdown Voltage @ 1 mA
(DC) Test Current
Max. Clamping Voltage At Specified Current (8/20μs)
Typical Capacitance @
1 MHz Typical Inductance
VM(DC) VN(DC) VC C L
(V) (V) (V) (pF) (nH)
EPD02S3R3DM271PT 3.3V 4.5~6.0V 9.5V@1A 250~300 0.8 EPD02S5R5DM301PT 5.5V 7.8~9.8V 15.0V@1A 280~330 0.8 EPD02S120DM191PT 12.0V 15.0~18.0V 24.0V@1A 170~210 0.8 EPD03S5R5DM651PT 5.5V 7.8~9.8V 15.0V@1A 570~710 1.0 EPD03S120DM311PT 12.0V 15.0~18.0V 24.0V@1A 270~330 1.0
N Series
DEVICE RATINGS AND SPECIFICATIONS
Part Number
Allowable Continuous
Working Voltage Breakdown
Voltage @ 1 mA (DC) Test Current
Max. Clamping Voltage At
Specified Current (8/20μs)
Typical Capacitance @ 1
MHz
Typical Inductance
VM(DC) VN(DC) VC C L
(V) (V) (V) (pF) (nH)
EPD02S030N271PT 3.3V 4.5~6.0V 10.5V@1A 250~300 0.8 EPD02S050N161PT 5.5V 8.0~11.0V 19.0V@1A 140~180 0.8 EPD02S120N121PT 12.0V 16.0~19.0V 27.5V@1A 100~140 0.8 EPD02S180N850PT 18.0V 23.0~28.0V 40.5V@1A 80~120 0.8 EPD03S030N701PT 3.3V 4.5~6.0V 10.5V@1A 630~770 1.0 EPD03S050N651PT 5.5V 8.0~11.0V 17.0V@1A 570~710 1.0 EPD03S120N311PT 12.0V 16.0~19.0V 27.5V@1A 270~330 1.0 EPD03S180N231PT 18.0V 23.0~28.0V 40.5V@1A 200~250 1.0
H Series
DEVICE RATINGS AND SPECIFICATIONS
Part Number
Allowable Continuous
Working Voltage
Breakdown Voltage @ 1 mA
(DC) Test Current
Max. Clamping Voltage At Specified
Current (8/20μs) Typical
Capacitance @ 1 MHz
Typical Inductance
VM(DC) VN(DC) VC C L
(V) (V) (V) (pF) (nH)
EPD02S180H300PT 2~18 22~32 50V@1A 30 0.8 EPD02S180H200PT 2~18 22~32 50V@1A 20 0.8 EPD02S180H100PT 2~18 22~32 55V@1A 10 0.8 EPD02S180H050PT 2~18 45~60 100V@1A 5 0.8 EPD02S180H020PT 2~18 320~360 520V@1A 2 0.8 EPD03S180H300PT 2~18 22~32 50V@1A 30 1.0 EPD03S180H200PT 2~18 22~32 50V@1A 20 1.0 EPD03S180H100PT 2~18 22~32 55V@1A 10 1.0 EPD03S180H050PT 2~18 45~60 100V@1A 5 1.0 EPD03S180H020PT 2~18 360~400 580V@1A 2 1.0
MTC Transient Voltage Suppressor ESD , EFT , Surge Suppressor & EMI / RFI Filter 0402 DM Series
Specifications Packaging Tape and Reel T 7 inch reel (10,000 pcs.)※ Material Body:Semiconducting Ceramic Terminals: Ni/Sn plated (code“P”)※ Operating Temperature ※ -40 to +85 (without derating) Solderability 260 2 sec ( IEC 60068※ -2-58) Soldering Heat Resistance 260 5 sec※ (IEC 60068-2-58) Response Time <0.5ns※
※Temperature coefficient(αV ) of clamping voltage (Vc) @ specified test current <0.01%/
Power dissipation 0.05W max※ Withstand ESD durability test severity of IEC 61000※ -4-2 Level 4: Contact discharge mode ; typical 8KV,max 20KV Air discharge mode ; typical 15KV,max 30KV Standards
IEC 61000-4-2 IEC 61000-4-3 IEC 61000-4-4 IEC 61000-4-5
Type Allowable continuous
working voltage VM(DC) (V)
Breakdown voltage at 1mA(DC) test current VN(DC) (V)
Max. clamping voltage at spec. current (8/20μs) VC (V@A)
Typ. Capacitance 1MHz
Ctyp. (pF)
Typical Inductance Ltyp.
(nH) EPD02S3R3DM271PT 3.3 4.5 ~ 6.0 9.5@ 1 250 ~ 300 0.8 EPD02S5R5DM301PT 5.5 7.8 ~ 9.8 15.0@ 1 280 ~ 330 0.8 EPD02S120DM191PT 12.0 15.0 ~ 18.0 25.5@ 1 170 ~ 210 0.8 How to order
PD 02 S 3R3 DM 271 P T
Type code
PolyDiode
Chip Size 02
= EIA0402 Single Chip
Allowable
Working voltage
3R3 = 3.3VDC
Diode-mode
application
Capacitance Code
271= 27×10¹
201= 20×10¹
Termination Code
P: Electroplating by Ni/Sn
Packing Code
T: Tape&Reel B:
Bulk
MTC Transient Voltage Suppressor
ESD Protection of High Speed Signal Lines 0402 H Series
Specifications
Packaging Tape and Reel T 7 inch reel (10,000 pcs.)※ Material Body:Semiconducting Ceramic Terminals: Ni/Sn plated (code“P”)※ Operating Temperature ※ -40 to +85 (without derating) Solderability 260 2 sec ( IEC 60068※ -2-58) Soldering Heat Resistance 260 5 sec (IEC 60068※ -2-58) Response Time <0.5ns※
※Temperature coefficient(αV ) of clamping voltage (Vc) @ specified test current <0.01%/
Powe※ r dissipation 0.05W max Withstand ESD durability test severity of IEC 61000※ -4-2 Level 4: Contact discharge mode ; typical 8KV,max 20KV Air discharge mode ; typical 15KV,max 30KV Standards
IEC 61000-4-2 IEC 61000-4-3 IEC 61000-4-4
Type Allowable continuous
working voltage VM(DC)
(V)
Breakdown voltage at 1mA(DC) test current VN(DC) (V)
Max. clamping voltage at spec. current (8/20μs) VC (V@A)
Typ. Capacitance 1MHz Ctyp. (pF)
Typical Inductance Ltyp.
(nH)
EPD02S180H300PT 2~18 22 ~ 32 50@ 1 30 0.8
EPD02S180H200PT 2~18 22 ~ 32 50@ 1 20 0.8
EPD02S180H100PT 2~18 22 ~ 32 55@ 1 10 0.8
EPD02S180H050PT 2~18 45 ~ 60 100@ 1 5 0.8
EPD02S180H020CT 2~18 320 ~ 360 520@ 1 2 0.8 How to order PD 02 S 180 H 300 P T
Type code
PolyDiode
Chip Size
02 = EIA0402 Single Chip
Allowable
Working voltage
180 = 2~18VDC
High-speed
signal line
application
Capacitance
Code
300= 30×100
050= 5×100
Termination
Code
P: Electroplating
by Ni/Sn
Packing Code T:
Tape&Reel
B: Bulk
MTC Transient Voltage Suppressor ESD 、EFT 、Surge Suppressor & EMI/RFI Filter
0402 N Series
Specifications Packaging Tape and Reel T 7 inch reel (10,000 pcs.)※ Material Body:Semiconducting Ceramic Terminals: Ni/Sn plated (code“P”)※ Operati※ ng Temperature -40 to +85 (without derating) Solderability 260 2 sec ( IEC 60068※ -2-58) Soldering Heat Resistance 260 5 sec (IEC 60068※ -2-58) Response Time <0.5ns※
※Temperature coefficient(αV ) of clamping voltage (Vc) @ specified test current <0.01%/
Power dissipation 0.05W max※ Withstand ESD durability test severity of IEC 61000※ -4-2 Level 4: Contact discharge mode ; typical 8KV,max 20KV Air discharge mode ; typical 15KV,max 30KV Standards
IEC 61000-4-2 IEC 61000-4-3 IEC 61000-4-4 IEC 61000-4-5
Type
Allowable continuous
working voltage VM(DC)
(V)
Breakdown voltage at
1mA(DC) test current
VN(DC) (V)
Max. clamping voltage
at spec. current (8/20μs)
VC (V@A)
Typ.
Capacitance
1MHzCtyp. (pF)
Typical Inductance
Ltyp
. (nH)
EPD02S030N271PT 3.3 4.5 ~ 6.0 10.5@ 1 250 ~ 300 0.8
EPD02S050N161PT 5.5 8.0 ~ 11.0 18.5@ 1 140 ~ 180 0.8
EPD02S120N121PT 12.0 16.0 ~ 19.0 27.5@ 1 100 ~ 140 0.8
EPD02S180N850PT 18.0 23.0 ~ 28.0 40.5@ 1 80 ~ 120 0.8
How to order PD 02 S 030 N 271 P T
Type code
PolyDiode
Chip Size
02 = EIA0402 Single Chip
Allowable
Working voltage
030 = 3.3VDC
Normal
application
Capacitance
Code
271= 27×10¹
161=16×10¹
Termination
Code
P: Electroplating
by Ni/Sn
Packing Code
T: Tape&Reel B:
Bulk
MTC Transient Voltage Suppressor ESD 、EFT 、Surge Suppressor & EMI/RFI Filter 0603 DM Series
Specifications ※ Packaging Tape and Reel T 7 inch reel (4,000 pcs.) ※ Material Body: Semiconducting Ceramic Terminals:
Ni/Sn plated (code“P”) ※ Operating Temperature -40 to +85 (without derating) ※ Solderability 260 2 sec ( IEC 60068-2-58) ※ Soldering Heat Resistance 260 5 sec. (IEC 60068 -2-58) ※ Response Time <0.5ns ※ Temperature coefficient(αV ) of clamping voltage (Vc)
@ specified test current <0.01%/ Power dissipation 0.05W max. ※ Power dissipation 0.05W max※ Withstand ESD durability test severity of IEC 61000※ -4-2 Level 4: Contact discharge mode ; typical 8KV,max 20KV Air discharge mode ; typical 15KV,max 30KV Standards
IEC 61000-4-2 IEC 61000-4-3 IEC 61000-4-4 IEC 61000-4-5
Type
Allowable continuous
working voltage VM(DC)
(V)
Breakdown voltage at
1mA(DC) test current
VN(DC) (V)
Max. clamping voltage
at spec. current (8/20μs)
VC (V@A)
Typ.
Capacitance
1MHz Ctyp. (pF)
Typical Inductance
Ltyp. (nH)
EPD03S5R5DM651PT 5.5 7.8 ~ 9.8 15.0@ 1 570 ~ 710 1.0
EPD03S120DM311PT 12.0 15.0 ~ 18.0 25.5 @ 1 270 ~ 330 1.0
How to order PD 03 S 5R5 DM 651 P T
Type code PolyDiode
Chip Size 03 = EIA0603
Single Chip
Allowable Working voltage 5R5 = 5.5VDC
Diode-mode application
Capacitance Code 651= 65×10¹
Termination Code P: Electroplating by Ni/Sn
Packing Code T: Tape&Reel B: Bulk
MTC Transient Voltage Suppressor ESD Protection of High Speed Signal Lines 0603 H Series
Specifications ※ Packaging Tape and Reel T 7 inch reel (4,000 pcs.) ※ Material Body: Semiconducting Ceramic Terminals:
Ni/Sn plated (code“P”) ※ Operating Temperature -40 to +85 (without derating) ※ Solderability 260 2 sec ( IEC 60068-2-58) ※ Soldering Heat Resistance 260 5 sec. (IEC 60068 -2-58) ※ Response Time <0.5ns ※ Temperature coefficient(αV ) of clamping voltage (Vc)
@ specified test current <0.01%/ Power dissipation 0.※ 05W max. Power dissipation 0.05W max※ Withstand ESD durability test severity of IEC 61000※ -4-2 Level 4: Contact discharge mode ; typical 8KV,max 20KV Air discharge mode ; typical 15KV,max 30KV Standards
IEC 61000-4-2 IEC 61000-4-3 IEC 61000-4-4
Type
Allowable continuous
working voltage VM(DC)
(V)
Breakdown voltage at
1mA(DC) test current
VN(DC) (V)
Max. clamping voltage
at spec. current (8/20μs)
VC (V@A)
Typ. Capacitance 1MHz
Ctyp. (pF)
Typical Inductance Ltyp.
(nH)
EPD03S180H300PT 2~18 22 ~ 32 50@ 1 30 1.0
EPD03S180H200PT 2~18 22 ~ 32 50@ 1 20 1.0
EPD03S180H100PT 2~18 22 ~ 32 55@ 1 10 1.0
EPD03S180H050PT 2~18 45 ~ 60 100@ 1 5 1.0
EPD03S180H020PT 2~18 360 ~ 400 580@ 1 2 1.0
How to order
PD 03 S 180 H 300 P T
Type code PolyDiode
Chip Size
03 = EIA0603 Single Chip
Allowable
Working voltage
180 = 2~18VDC
High-speed
Signal line
application
Capacitance
Code
300= 30×100
050= 5×100
Termination
Code
P: Electroplating
by Ni/Sn
Packing Code
T: Tape&Reel
B: Bulk
MTC Transient Voltage Suppressor
ESD Protection of High Speed Signal Lines
0603 N Series
Specifications ※ Packaging Tape and Reel T 7 inch reel (4,000 pcs.) ※ Material Body: Semiconducting Ceramic Terminals:
Ni/Sn plated (code“P”) ※ Operating Temperature -40 to +85 (without derating) ※ Solderability 260 2 sec ( IEC 60068-2-58) ※ Soldering Heat Resistance 260 5 sec. (IEC 60068 -2-58) ※ Response Time <0.5ns ※ Temperature coefficient(αV ) of clamping voltage (Vc)
@ specified test current <0.01%/ Power dissipation 0.05W max. ※ Power dissipation 0.05W max※ Withstand ESD durability test severity of IEC 61000※ -4-2 Level 4: Contact discharge mode ; typical 8KV,max 20KV Air discharge mode ; typical 15KV,max 30KV Standards
IEC 61000-4-2 IEC 61000-4-3 IEC 61000-4-4 IEC 61000-4-5
Type
Allowable continuous
working voltage VM(DC)
(V)
Breakdown voltage at
1mA(DC) test current
VN(DC) (V)
Max. clamping voltage
at spec. current (8/20μs)
VC (V@A)
Typ.
Capacitance
1MHz Ctyp. (pF)
Typical Inductance Ltyp. (nH)
EPD03S030N701PT 3.3 4.5 ~ 6.0 10.5@ 1 630 ~ 770 1.0
EPD03S050N651PT 5.5 8.0 ~ 11.0 18.5@ 1 570 ~ 710 1.0
EPD03S120N311PT 12.0 16.0 ~ 19.0 27.5@ 1 270 ~ 330 1.0
EPD03S180N231PT 18.0 23.0 ~ 28.0 40.5@ 1 200 ~ 250 1.0
How to order PD 03 S 030 N 701 P T
Type code
PolyDiode
Chip Size
03 = EIA0603 Single Chip
Allowable
Working voltage
030 = 3.3VDC
Normal
application
Capacitance
Code
701= 70×10¹
231= 23×10¹
Termination
Code
P: Electroplating
by Ni/Sn
Packing Code
T: Tape&Reel B:
Bulk