RECICLADO – TERMOFORMADO –BOLSAS – SOPLADO – INYECCION – EMBOTELLADO – RAFIA - EXTRUSION

ESPECIFICACIONES

Project name 300kg/hr PP PE film washing line

Summarize 1. Electricity power use :440V,60Hz,3phase

2. Material: waste PP PE film , PP woven bag and etc

3. Final size of scraps: mesh screen: φ60mm

4. Output: 300Kg/hour

MODELO: VM-LAVFIL300 LAVADORA, SECADORA, MOLEDORA DE POLIETILENO

RECICLADO – TERMOFORMADO –BOLSAS – SOPLADO – INYECCION – EMBOTELLADO – RAFIA - EXTRUSION

No Nombre del

Equipo Parámetros Técnicos Cant.

1 Cinta

Transportadora

This machine mainly used to convey the PE/PP film into Plastic

crusher

1. Motor power: 1.5KW ,Speed control by frequency inverter

2. Width of convey belt :600mm

3. length of convey belt : 5000mm

4. Install isolation stick against-slide on the surface of the belt.

5. Adjust Height of conveying belt freely.

6. Small moving wheels are flexible and convenient.

7. the convey speed is adjustable which control the feeding production

capacity per hour of the whole line

Note that you can put this convey under ground of the floor

1set

RECICLADO – TERMOFORMADO –BOLSAS – SOPLADO – INYECCION – EMBOTELLADO – RAFIA - EXTRUSION

3 SWP800 Molino

This machine will crush the PE/PP film

1. Motor power: 37kw

2. Mesh screen:φ60mm

3. Rotation diameter of Main shaft: φ450mm

4. length of main shaft:1250mm

5. Feeding inlet: 900mm×600mm

6. Quantity of rotating blade： 6pcs(3group)

7. Quantity of fixed blade： 4pcs(two group)

8. Crushing with water, the bearing with water cooling design

9. Capacity: 300Kg/hour

10. Plastic crusher will work with water process

1set

RECICLADO – TERMOFORMADO –BOLSAS – SOPLADO – INYECCION – EMBOTELLADO – RAFIA - EXTRUSION

11. the screen exchange open ways : by motor drive

12. the hopper of crusher open ways : by motor drive: 1.5kw

4 Tornillo

Alimentador

This machine will used to send the film scraps into the next step

1. Effective length:3500mm

2. Screw diameter: φ380mm

3. Capacity: >300 kg/hour

4. Motor power:3kw

5.Material for contact with material: Stainless steel 304

6. This machine with water spray nozzle

Note that: 1. the angle will be 60 degree , it can help water in fast ways

drainage .

2. for bottom parts will be with 2 meter in length for screen mesh to

1set

RECICLADO – TERMOFORMADO –BOLSAS – SOPLADO – INYECCION – EMBOTELLADO – RAFIA - EXTRUSION

take dirty water as more as possible

5.6 Tanque de lavado

por Flotación

This machine is mainly used to clean the rest dirty on the surface of

film scraps

1. Effective length: 6000mm, Width: 1200mm

2. Washing roller motor: 2.2KW+2.2kw

3. Screw Feeding motor: 2.2KW

4. Qty of pushing roller : 5set

5.Material for contact with material: Stainless steel304

RECICLADO – TERMOFORMADO –BOLSAS – SOPLADO – INYECCION – EMBOTELLADO – RAFIA - EXTRUSION

7 Tornillo

Alimentador

This machine will used to send the film scraps into the next step

1. Effective length:3500mm

2. Screw diameter: φ380mm

3. Capacity: >300 kg/hour

4. Motor power:3kw

5.Material for contact with material: Stainless steel 304

6. This machine with water spray nozzle

Note that: 1. the angle will be 60 degree , it can help water in fast ways

drainage .

2. for bottom parts will be with 2 meter in length for screen mesh to

take dirty water as more as possible

1set

RECICLADO – TERMOFORMADO –BOLSAS – SOPLADO – INYECCION – EMBOTELLADO – RAFIA - EXTRUSION

8 Maquina de

deshidratación

This machine mainly used to dewater for film scraps to get final good

quality film scraps

1.Motor power:45KW

2.Capacity : 300kg/hour

3. Motor speed: 1440rpm

4. The diameter of the screen hole: 2mm

5. The thickness of screen mesh : 6mm

6. The dewatering rate: more than 95%

7. Continuously discharge the material from side and drainage from the bottom of

this machine

8. Material for contact with material: Stainless steel304

9. Motor of Auto-brushing clean system :2.2kw

10. The material of Main shaft :stainless steel :diameter 220*8mm(Thickness)

11. The material of blade :stainless steel ,thickness:6mm

12. Rotation Diameter of main shaft: 800mm

1set

RECICLADO – TERMOFORMADO –BOLSAS – SOPLADO – INYECCION – EMBOTELLADO – RAFIA - EXTRUSION

9-

14

Sistema de secado

por aire caliente y

ventilador de aire

This machine is mainly used to use hot air to remove the moisture from

PP/PE scraps

1.Total length of stainless steel pipe : 24meter

2.The diameter of stainless steel pipe : 159mm

3.Heating power of heating box : 36Kw+36kw

4.The temperature is adjustable by temperature controller

5. The Moisture of PP/PE will be less than 8%

6.Power of air blower motor: 7.5Kw+7.5kw

1set

RECICLADO – TERMOFORMADO –BOLSAS – SOPLADO – INYECCION – EMBOTELLADO – RAFIA - EXTRUSION

15 Silo

This machine is mainly used to store the PE/PP scraps for next step

packing

1. Effective volume: 1.5m3

2. Material : stainless steel 304

1set

16 Control cabinet

Electric elements: Schneider Contactor, Schneider Relay,

Inverter will use ABB brand or Danfoss brand

1 set