MEGOHMMETER 1015 - AEMC...Megohmmeter Models 1005 and 1015 3 1.2 Definition of Measurement...

MEGOHMMETER 10051015

E N G L I S H User Manual

AEMCI N S T R U M E N T S

MEGOHMMETER

MODEL 1005

BatteryCheck

OFF MΩ - 500 V

10 Ω +

10 Ω −

0.10.5

15 10 50 100

5001000

0

12

3 4 5 67

8

9

10

0

100200 300 400

500

600V

600V

-+

6!

MΩ

OFF

MΩ - 1000 V

MΩ - 500 V

1000 Ω


MEGOHMMETER

MODEL 1015

BatteryCheck

10 Ω +

10 Ω −

0.10.5

15 10 50 100

5001000

0

12

3 4 5 67

8

9

10

0

100200 300 400

500

600V

600V

-+

6!

MΩ

Statement of Compliance

Chauvin Arnoux®, Inc. d.b.a. AEMC® Instruments certifies that this instrument has been calibrated using standards and instruments traceable to international standards.

We guarantee that at the time of shipping your instrument has met its published specifications.

An NIST traceable certificate may be requested at the time of purchase, or obtained by returning the instrument to our repair and calibration facility, for a nominal charge.

The recommended calibration interval for this instrument is 12 months and begins on the date of receipt by the customer. For recalibration, please use our calibration services. Refer to our repair and calibration section at www.aemc.com.

Serial #: ________________________________

Catalog #: 1402.01 / 1403.01

Model #: 1005 / 1015

Please fill in the appropriate date as indicated:

Date Received: _________________________________

Date Calibration Due: _______________________

Chauvin Arnoux®, Inc.d.b.a AEMC® Instrumentswww.aemc.com

Table of Contents

1. INTRODUCTION ............................................................................... 21.1 International Electrical Symbols ................................................21.2 DefinitionofMeasurementCategories .....................................31.3 ReceivingYourShipment ..........................................................31.4 OrderingInformation .................................................................3

1.4.1 AccessoriesandReplacementParts ............................3

2. PRODUCT FEATURES ...................................................................... 42.1 Description ................................................................................42.2 Features ....................................................................................42.3 Model1005ControlFeatures ...................................................52.4 Model1015ControlFeatures ...................................................6

3. SPECIFICATIONS............................................................................. 73.1 ElectricalSpecifications ............................................................73.2 GeneralSpecifications ..............................................................83.3 SafetySpecifications ................................................................8

4. OPERATION .................................................................................... 94.1 SafetyCheck(VoltageTest) .....................................................94.2 InsulationResistanceTesting(MΩRange) ..............................9

4.2.1 TestVoltage ..................................................................94.2.2 SpotTesting ................................................................104.2.3 RatioTesting ...............................................................104.2.4 TipsForSuccessfulInsulationResistanceTesting ......... 114.2.5 InsulationMeasurement-Connections ......................114.2.6 InsulationResistanceMeasurementsonMotors ........14

4.3 Continuity Measurements .......................................................154.4 ResistanceMeasurements(Model1015Only) ......................15

5. MAINTENANCE ............................................................................. 165.1 Maintenance ...........................................................................16

5.1.1 Battery Test .................................................................165.1.2 BatteryandFuseReplacement ..................................175.1.3 Cleaning ......................................................................17

RepairandCalibration ...........................................................................18TechnicalandSalesAssistance ............................................................18Limited Warranty ...................................................................................19WarrantyRepairs ...................................................................................19

2 Megohmmeter Models 1005 and 1015

CHAPTER 1

INTRODUCTION

WARNING Thesesafetywarningsareprovided toensure thesafetyofpersonnelandproperoperationoftheinstrument.•Readthisinstructionmanualcompletelyandfollowallthesafetyinfor-mationbeforeattemptingtouseorservicethisinstrument.

•Safetyistheresponsibilityoftheoperator!•Testsaretobecarriedoutonlyondeadcircuits!Checkforlivecircuitsbeforemakingresistancemeasurements(safetycheck).

•Alwaysmakeconnectionsfromtheinstrumenttothecircuitundertest.•Thesemegohmmetersaresourcesofhighvoltage,asisthesampleconnectedtothem.Allpersonsperformingorassistinginthetestsmustfollowallsafetyprecautionstopreventelectricalshocktothemselvesandtoothers.

•AEMCconsiders theuseof rubbergloves tobeanexcellent safetypractice even if the equipment is properly operated and correctlygrounded.

•When testing capacitancesamples,makesure that theyhavebeenproperlydischargedandthattheyaresafetotouch.Dielectricinsula-tionsamplesshouldbeshort-circuitedforatleastfivetimestheamountoftimetheywereenergized.

•Neveropenthebackoftheinstrumentwhileconnectedtoanycircuitorinput.

1.1 International Electrical SymbolsThis symbol signifies that the instrument is protected by double or rein-forced insulation.This symbol on the instrument indicates a WARNING and that the operator must refer to the user manual for instructions before operating the instrument. In this manual, the symbol preceding instructions indicates that if the instructions are not followed, bodily injury, installation/sample and product damage may result.Risk of electric shock. The voltage at the parts marked with this symbol may be dangerous.

In conformity with WEEE 2002/96/EC

Megohmmeter Models 1005 and 1015 3

1.2 Definition of Measurement CategoriesCat. I: Formeasurementsoncircuitsnotdirectlyconnected to theAC

supplywall outlet such as protected secondaries, signal level,andlimitedenergycircuits.

Cat. II: Formeasurements performed on circuits directly connected totheelectricaldistributionsystem.Examplesaremeasurementsonhouseholdappliancesorportabletools.

Cat. III: For measurements performed in the building installation atthe distribution level such as on hardwired equipment in fixedinstallationandcircuitbreakers.

Cat. IV: For measurements performed at the primary electrical supply(<1000V) such as on primary overcurrent protection devices,ripplecontrolunits,ormeters.

1.3 Receiving Your ShipmentUponreceivingyourshipment,makesure that thecontentsareconsis-tentwith thepacking list.Notifyyourdistributorofanymissing items. Iftheequipmentappearstobedamaged,fileaclaimimmediatelywiththecarrierandnotifyyourdistributoratonce,givingadetaileddescriptionofanydamage.Savethedamagedpackingcontainertosubstantiateyourclaim.

1.4 Ordering InformationMegohmmeterModel1005..................................................Cat. #1402.01MegohmmeterModel1015..................................................Cat. #1403.01Both include a carrying case, shockproof rubber housing, set of black and red leads, black test probe, red alligator clip, spare fuse (inside megohmmeter), 4 x 1.5V alkaline “AA” bat-teries (not installed), and a user manual.

1.4.1 Accessories and Replacement Parts

Setofreplacementleads ..................................................... Cat. #2118.41CarryingCase...................................................................... Cat. #2118.40Fuses,setof5,1.6A ............................................................Cat. #2970.22

Order Accessories and Replacement Parts Directly OnlineCheck our Storefront at www.aemc.com for availability


CHAPTER 2

PRODUCT FEATURES

2.1 DescriptionTheMegohmmeters,Model1005and1015,areanaloginstrumentswithfoureasy-to-readscales.TheMΩscaleisaneasy-to-readlogscalegraduatedfrom0.1to1000MΩ (yellowbackground) at 500Vand1000V (Model 1015).TheΩ scale is linearwitharangefrom0to10Ω(whitebackground).Tousethe0to1000ΩscaleontheModel1015,takethereadingonthe0 to 10Ωrangeandmultiplythereadingby100.TheACvoltagescaleislinearwitharangeof0to600VAC(whitebackground).Continuitytestsaredonewithatestcurrentof200mA.Thecoloredbatteryscalehasarangeofgreenforagoodbatteryandarangeofredorlowerforadefectivebattery.A built-in battery tester is provided by simply pressing the yellow pushbuttonwhentheselectorswitchisintheOFFposition.Voltmeter(safetycheck)witharangeof0to600VACisstandardandworkswhen the selector switch is in the 500Vposition or the 1000Vposition(Model1015only).

2.2 Features• Measuresinsulationat500V(Model1005)• Pushbuttonforbatterycheck• Designed for harsh environments: offshore,mining, heavy-duty

field,industrial,commercialelectricalandmilitaryuse• 0to10Ω+ and 0 to 10Ω-continuityranges• Continuity200mAtestcurrent• Smallandlightweight• Large,direct-reading,coloredscale• 600Vtestvoltagerange(safetycheck)• Yellownon-slipshockproofcase• Measuresinsulationat1000V(Model1015Only)• 0to1000Ωresistancerange(Model1015Only)


2.3 Model 1005 Control Features

–

1 2

3

4

5

6

7

Figure 1

1. Line(–)terminal

2.Earth/Ground(+)terminal

3.Mechanicalzeroadjustmentscrews

4. 4-positionrotaryswitch

5.Protectiverubberhousing

6.Push-to-testbutton

7.Batterycheckandindicationdisplay


2.4 Model 1015 Control Features

–

1 2

3

4

5

6

7

Figure 2

1. Line(–)terminal

2.Earth/Ground(+)terminal

3.Mechanicalzeroadjustmentscrews

4. 4-positionrotaryswitch

5.Protectiverubberhousing

6.Push-to-testbutton

7.Batterycheckandindicationdisplay


CHAPTER 3

SPECIFICATIONS

3.1 Electrical Specifications

INSULATION TESTS

DC Test Voltage:500V(Model1005) 500Vand1000V(Model1015)Megohm Range: 0.1 to 1000MΩ Short Circuit Current: ≤6mAAccuracy: ±5%ofreadingDischarging Time (Auto): 1s/µF

CONTINUITY TESTS

Range: 0 to 10Ω - ; 0to10Ω+Short Circuit Current: ≥200mA Open Circuit Voltage: 4.5to6.5VAccuracy: ±3%fullscale

RESISTANCE TESTS (Model 1015 Only)

Range: 0 to 1000ΩShort Circuit Current: ≥2mAOpen Circuit Voltage: 4.5to6.5VAccuracy: ±3%fullscale

VOLTAGE TESTS (Safety Check)

Voltage Range: 0to600VACFrequency: 45to400HzAccuracy:3%offullscaleInput Impedance:300kΩ


3.2 General SpecificationsPower Supply: 4 x 1.5VAAbatteriesDielectric Test:6000V,50/60Hz,1minuteMeter Movement: RuggedtautbandsuspensionDimensions: 6.6x4.2x2.2"(167x106x55mm)Weight:1.45 lbs(650g)Operating Temperature Range: 14°to131°F(-10°to55°C),20-80%RHStorage Range:-40°to158°F(-40°to70°C),10-90%RHTerminals: “-”Line(black);“+”earth(red);accepts4mmbananaplugsReference Conditions: 63° to 73°F (17° to 23°C), 45-55% RH; Supply Voltage: 5.3 to 5.7V; Voltage Frequency: 45 to 65Hz; Electric Field: <1V/M; Magnetic Field: <40A/M; Position: Horizontal ± 5°.

3.3 Safety SpecificationsIEC 1010-1: Safety requirements for electrical equipment formeasure-ment,controlandlaboratoryuseVDE 0413-1:InsulationtestersVDE 0413-4: OhmmetersVDE 0100:Specificationsforthecreationofhighcurrentinstallationsofnominalvoltagelessthan1000VIEC 801: Electromagnetic compatibility for measurement and controlequipmentinindustrialprocesses Part2:Sectionsrelatingtoelectrostaticdischarges Part3:Sectionsrelatingtoradiatedelectricfields Part4:Sectionsrelatingtoelectrostaticdischarges Part5:Sectionsrelatingtoelectricshocks

IEC 68.2.6: VibrationsIEC 68.2.27:ShocksIEC 68.2.29:ShakesIEC 68.2.31:BumpsIEC 68.2.32:FreefallUL 94: Self-extinguishingcapability

Specifications are subject to change at any time without notice


CHAPTER 4

OPERATION

4.1 Safety Check (Voltage Test)

WARNING: MAKESURETHEJACKSAREFIRMLY INSERTEDINTOTHETOPOFTHEMEGOHMMETERPRIORTOPERFORM-INGANYELECTRICALTESTS!

Beforemeasuring insulation resistance, confirm that thesample is fullydischarged(particularly indielectricandcapacitancesamples),andthatthesampleisnotconnectedtoanenergizedcircuit.

To perform the voltage test:• SettherangeselectiontoMΩ500VorMΩ1000V(Model1015only)• Connectandreadonthevoltagescale(600VACmax)

Youdonotneedtopresstheyellowbuttontomeasurevoltage.

NOTE: IfmeasuringvoltageonaDCcircuit,thepointerwilldeflectbutthemeasurementmaybeinaccurate.

4.2 Insulation Resistance Testing (MΩ Range)After checking for a live circuit (seeSafetyCheck above), connect themegohmmeter.SeveralconnectionexamplesareillustratedinFigures3through10.

4.2.1 Test VoltageNopublishedstandardtellswhichvoltagetochooseforanygivenwinding.However,publishedrecommendationscouldbesummarizedasfollows:

Rated Voltage of Motor Test VoltageBelow115 250V

115 250Vor500V230 500V460 500Vor1000V


4.2.2 Spot TestingAsageneralruleinspottesting,testvoltageshouldbeapplieduntilnovariation in reading is noted for 15 seconds, or applied for a fixed 60seconds.What minimum value should be measured?TheIEEEstandardNo.43-1974statesthatitisimpossibletospecifythevalueofinsulationresistanceatwhichawindingwillfailelectrically,butonmotors,minimumreadingsgenerallystatedare:

Rated Voltage R Minimum250 or less 2MΩ

460 2MΩ

Thereisnofixedfigurefordeterminingwhatisgoodandbadinresistancereadings,butagoodguidewouldbe1megohmforeveryonehundredappliedoperatingvolts,asaminimumfigure.Thisappliestomotorsandtransformers. When the insulation resistance gets this low, an electri-calbreakdowncanbeexpectedatanytime,andrewindingorreplacingshouldbeconsidered.It isnotunusual forawinding tobe10 to100 times therecommendedminimumvalue(IEEEStd.#43-1974:Recommended Practice for Testing Insulation Resistance of Rotating Machinery), but this varies with tem-peratureandhumidity.

4.2.3 Ratio TestingIntimeresistancereading(DielectricAbsorptionRatio),readingsaretakenat30and60secondstoobtainthedielectricabsorptionratio.

Insulationresistance@60s=DielectricAbsorptionRatio(DAR)

Insulationresistance@30s

Thistestisusefultoincreasetheaccuracyofspottesting.Ingeneral,aratioof1.25:2orbettershouldberequired.Aratiobelowthisindicatesthatrepairisprobablyneeded.

Remember,aDCinsulationtestmaybeusedforacceptancetesting,butismorecommonlyusedtocheckthegradualdeteriorationofequipmentoveritslife.Consultyourequipmentmanufacturerforspecifictestortestvoltageifnotknown.

Insulationresistancedecreaseswithmoisture,temperatureandageandshouldberecordedovertimeatagiventemperatureandcorrected.


4.2.4 Tips For Successful Insulation Resistance Testing

• Check with the equipment manufacturer for factory insulationresistancereadings.

• Donotrelyoninsulationresistancetestingaloneasproofofwind-ingconditions.

• Donotexpectthesamevalueforallpartsofallmachines.• Observe consistent test time duration, recognizing that total

currentthroughinsulationundertestwillvarywithtime.• Correctallreadingsproperlytoastandardreferencetemperature

(seeIEEEStd.#43-1974,TemperatureCorrectionCurve).• Knowwhatyouaretesting.Isolatethepieceofequipmentfrom

othercircuitry.• Watchtrendsratherthanrelyingonsingle“spot”readings.

4.2.5 Insulation Measurement - ConnectionsFigure3showstheconnectionstomeasuretheinsulationofoneconduc-tor to the other conductors.The cable should be disconnected at bothendstoavoidleakagethroughswitchboardsandpanels.

OFF

MΩ - 1000 V

MΩ - 500 V

1000 Ω


MEGOHMMETER

MODEL 1015

Battery

Check

10 Ω +

10 Ω −

0.10.5

15 10 50 100

5001000

0

12

3 4 5 67

8

9

10

0

100200 300 400

500

600V

600V

-+

6!

MΩ

Cable Insulation

Conductor Under Test

+-

Figure 3


Figures4and5showtheconnectionsfortestinginsulationfromasupplyconductortoground(motorframe).

Cable Insulation


+-

OFF

MΩ - 1000 V

MΩ - 500 V

1000 Ω


MEGOHMMETER

MODEL 1015

Battery

Check

10 Ω +

10 Ω −

0.10.5

15 10 50 100

5001000

0

12

3 4 5 67

8

9

10

0

100200 300 400

500

600V

600V

-+

6!

MΩ

Figure 4

Cable Insulation


+-

OFF

MΩ - 1000 V

MΩ - 500 V

1000 Ω


MEGOHMMETER

MODEL 1015

Battery

Check

10 Ω +

10 Ω −

0.10.5

15 10 50 100

5001000

0

12

3 4 5 67

8

9

10

0

100200 300 400

500

600V

600V

-+

6!

MΩ

Figure 5


Figure6showstheconnectionstoa transformer (lightingordistribu-tion).Makesure that theswitchesand/or circuit breakers on both sidesareopen.Checkthehighvoltagewindingtoground,lowvoltagetoground,andtheresistancebetweenthemwithnowindinggrounded.

~~

~ ~~~

Jumpers

+-

OFF

MΩ - 1000 V

MΩ - 500 V

1000 Ω


MEGOHMMETER

MODEL 1015

Battery

Check

10 Ω +

10 Ω −

0.10.5

15 10 50 100

5001000

0

12

3 4 5 67

8

9

10

0

100200 300 400

500

600V

600V

-+

6!

MΩ

Tested Winding

TransformerGrounding Lug

- +

OFF

MΩ - 1000 V

MΩ - 500 V

1000 Ω


MEGOHMMETER

MODEL 1015

Battery

Check

10 Ω +

10 Ω −

0.10.5

15 10 50 100

5001000

0

12

3 4 5 67

8

9

10

0

100200 300 400

500

600V

600V

-+

6!

MΩ

Figure 7 shows the connections formeasuring the insulation of a three-phase line to ground by connectingthejumpersbetweenphases.Thisgivesareadingofallconductorsat once. If a load such as a motor,heater, etc., is attached to theotherend of the line, it will read the loadresistance to ground at the sametime. By removing the jumpers, readingscanbemadebetween the individualconductorsandground.

Figure 6

Figure 7


4.2.6 Insulation Resistance Measurements on MotorsFigure8showsreadingtheresistancetogroundofathree-phasemotorwinding.Sincethethree-phasemotorsareinternallyconnected,itisonlynecessarytoconnectoneleadtothemotorleadandtheotherleadtothemotorframeasshown.

+-

OFF

MΩ - 1000 V

MΩ - 500 V

1000 Ω


MEGOHMMETER

MODEL 1015

Battery

Check

10 Ω +

10 Ω −

0.10.5

15 10 50 100

5001000

0

12

3 4 5 67

8

9

10

0

100200 300 400

500

600V

600V

-+

6!

MΩ

Figure 8

Figure9showsthewind-ings of a three-phasemotorseparated.Sometimes this can bedone at the lead termi-nals, while other timesthe end bells must beremoved to get at theleadwiresofthecoils.Byconnecting themeg-ohmmeterasshown,thephase insulation resis-tancevaluecannowbedetermined.Read between phases “A”and “B”, then “B” and “C”,then“C”and“A”.

OFF

MΩ - 1000 V

MΩ - 500 V

1000 Ω


MEGOHMMETER

MODEL 1015

Battery

Check

10 Ω +

10 Ω −

0.10.5

15 10 50 100

5001000

0

12

3 4 5 67

8

9

10

0

100200 300 400

500

600V

600V

-+

6!

MΩ

A

B

C

+-

Figure 9


Figure 10 shows connec-tions for testing insulationfromasupplyconductor inaswitchbox to ground (motorframe).An identical testmaybecarriedoutfromthemotorstarter.

4.3 Continuity MeasurementsOnceithasbeenverifiedthatno voltage is present, thecontinuitycheckmaybeper-formed.• Settheswitchtothe10Ω+

position. The measure-ment is done automati-cally;you do not need to press the yellow button.

• Read the value on thewhitescale0to10Ω.

• Settheswitchtothe10Ω–positionandmakesurethattheneedleoftheinstrumentreadsthesamevalue.Ifthesecondvalueisdifferentfromtheprecedingone,addupthetworeadingsanddividebytwo.Thereasonfortakingtwodifferentreadingsistocomplywiththeinter-nationalstandardVDE0413-4. Ifyourworkdoesnot requireyou toconformtothisstandard,onlyonemeasurementisnecessary.

• Returnto“OFF”afteruse.

NOTE: For better measurement accuracy on the 10Ω+ and the10Ω–ranges,measuretheresistanceoftheleadsbyshort-circuit-ingthem,thensubtractthisvaluefromthemeasuredvalues.

4.4 Resistance Measurements (Model 1015 Only)• Settheswitchtothe1000Ωposition.Themeasurementisdoneauto-

matically;you do not need to press the yellow button.• Readthevalueonthewhitescale0to10Ω,thenmultiplythereading

by100togettheactualvaluemeasured.• Returnto“OFF”afteruse.

Motor Side of Switch:Connection to One Leg

GroundedMotor Frame

Starter In

+-

OFF

MΩ - 1000 V

MΩ - 500 V

1000 Ω


MEGOHMMETER

MODEL 1015

Battery

Check

10 Ω +

10 Ω −

0.10.5

15 10 50 100

5001000

0

12

3 4 5 67

8

9

10

0

100200 300 400

500

600V

600V

-+

6!

MΩ

Figure 10


CHAPTER 5

MAINTENANCE

5.1 Maintenance

WARNING:

• Formaintenanceuseonlyspecifiedreplacementparts.

• To avoid electrical shock, do not attempt to perform any servicingunlessyouarequalifiedtodoso.

• Toavoidelectricalshockand/ordamagetotheinstrument,donotgetwaterorotherforeignagentsintothecase.TurntheinstrumentOFFanddisconnecttheunitfromallthecircuitsbeforeopeningthecase.

5.1.1 Battery TestCheckthatthebatteriesareingoodworkingconditionpriortousingtheinstrument.With the switch in the OFF position, press the yellow button:• Thebatteriesaregoodiftheneedleisinthegreenzone.• The batteries need replacement if the needle is in the red zone or

lower.

The average battery life is:• 1000insulationmeasurements

of10secondsontheMΩ-500VrangeforR=500kΩ.

• 200 insulation measurementsof 10 seconds on the MΩ -1000VrangeforR=1MΩ.

• 1500continuitymeasurementsof 10 seconds on the 10Ω range.

NOTE: Theinstrumentwilloperatecorrectlywithabatteryvoltagerangeof4.5to6.5V.

0.10.5

15 10 50 100

5001000

0

12

3 4 5 67

8

9

10

0

100200 300 400

500

600V

600V

-+

6!

MΩ

RED zone or below:

Battery needs to be replaced

GREEN zone:

Battery is good


5.1.2 Battery and Fuse Replacement

WARNING: Makesure thatno terminalsareconnectedand that theswitchisintheOFFpositionbeforeopeningthebackoftheinstrument.

• Removetheyellowshockproofhousing.• Removethetwoscrewsfromthebackoftheinstrument(Fig.11).• Removethebackcover.• Replacethefuseorbatteries.

NOTE: Thereisasparefuseinstalledinthebackcover.

• Reversetheaboveproceduretoinstallthebackcoverandtheshockproofhousing.

• Toclosethebackstandflushwiththebackcover,applylightpressureatPointAinFig.11.

+

+

+

+

Cover screws

1.5 V batteries LR6

1.6 A fuse

Point A

Figure 11

5.1.3 Cleaning

• Clean thebodyof the instrumentwithacloth lightlymoistenedwithsoapywater.

• Wipecleanwithaclothmoistenedwithcleanwateranddry.• Donotusesolvent.


Repair and Calibration

Toensurethatyourinstrumentmeetsfactoryspecifications,werecommendthatitbescheduledbacktoourfactoryServiceCenteratone-yearintervalsforrecalibration,orasrequiredbyotherstandardsorinternalprocedures.

For instrument repair and calibration:Youmust contactourServiceCenter foraCustomerServiceAuthorizationNumber(CSA#).Thiswillensurethatwhenyourinstrumentarrives,itwillbetrackedandprocessedpromptly.PleasewritetheCSA#ontheoutsideoftheshipping container. If the instrument is returned for calibration,weneed toknowifyouwantastandardcalibration,oracalibrationtraceabletoN.I.S.T.(Includescalibrationcertificateplusrecordedcalibrationdata).

Ship To: ChauvinArnoux®,Inc.d.b.a.AEMC®Instruments15 Faraday DriveDover,NH03820USAPhone:(800)945-2362(Ext.360)

(603) 749-6434(Ext.360)Fax: (603)742-2346or(603)749-6309E-mail:[email protected]

(Orcontactyourauthorizeddistributor)Costsforrepair,standardcalibration,andcalibrationtraceabletoN.I.S.T.areavailable.NOTE: You must obtain a CSA# before returning any instrument.

Technical and Sales Assistance

Ifyouareexperiencinganytechnicalproblems,orrequireanyassistancewiththeproperoperationorapplicationofyourinstrument,pleasecall,mail,faxore-mailourtechnicalsupportteam:

ChauvinArnoux®,Inc.d.b.a.AEMC®Instruments200FoxboroughBoulevardFoxborough,MA02035USAPhone:(800)343-1391

(508) 698-2115Fax: (508)698-2118E-mail: [email protected]

NOTE: Do not ship Instruments to our Foxborough, MA address.


Limited Warranty

TheModel 1005and1015arewarranted to theowner for aperiodof twoyearsfromthedateoforiginalpurchaseagainstdefectsinmanufacture.Thislimitedwarranty isgivenbyAEMC® Instruments,notby thedistributor fromwhomitwaspurchased.Thiswarrantyisvoidiftheunithasbeentamperedwith,abusedor if thedefect is related toservicenotperformedbyAEMC® Instruments.

For full and detailed warranty coverage, please read the Warranty Coverage Information, which is attached to the Warranty Registration Card (if enclosed) or is available at www.aemc.com. Please keep the Warranty Coverage Information with your records.

What AEMC® Instruments will do:If a malfunction occurs within thewarranty period, youmay return the in-strument to us for repair, provided we have your warranty registration in-formation on file or a proof of purchase. AEMC® Instruments will, at itsoption,repairorreplacethefaultymaterial.

REGISTER ONLINE AT:www.aemc.com

Warranty Repairs

What you must do to return an Instrument for Warranty Repair: First, request aCustomerServiceAuthorizationNumber (CSA#) by phoneorbyfaxfromourServiceDepartment(seeaddressbelow),thenreturntheinstrumentalongwith thesignedCSAForm.Pleasewrite theCSA#on theoutsideoftheshippingcontainer.Returntheinstrument,postageorshipmentpre-paidto:

Ship To: ChauvinArnoux®,Inc.d.b.a.AEMC®Instruments15FaradayDrive•Dover,NH03820USAPhone:(800)945-2362(Ext.360)

(603) 749-6434(Ext.360)Fax: (603)742-2346or(603)749-6309E-mail:[email protected]

Caution:Toprotectyourselfagainstin-transitloss,werecommendyouinsureyourreturnedmaterial.

NOTE: You must obtain a CSA# before returning any instrument.

Notes:

07/08

99-MAN100089v8

Chauvin Arnoux®, Inc. d.b.a. AEMC® Instruments15FaradayDrive•Dover,NH03820USA•Phone:(603)749-6434•Fax:(603)742-2346

www.aemc.com

MEGOHMMETER 1015 - AEMC...Megohmmeter Models 1005 and 1015 3 1.2 Definition of Measurement...

Documents

Transcript of MEGOHMMETER 1015 - AEMC...Megohmmeter Models 1005 and 1015 3 1.2 Definition of Measurement...