Laser Patterned ITO and FTO Substrates - Automatic Research
2
www.automatic-research.de Visit us at Laser Patterned ITO and FTO Substrates High quality substrates for optoelectronic applications Patterned/Structured by femtosecondlaser Liquid crystal displays (LCD) technology Organic light emitting diodes (OLED) Organic photovoltaic and perovskite (solar) cells Electrochemistry Flat antennas for mobile communication Conducting glass/Transparent electrodes Transparent, conductive coatings on glass • Electrical conductivity and optical transparency • Homogeneously flat ITO/FTO coatings • Low roughness • Uniform transmission Laser cut properties Typically 10-20 μm width, no shunts, no spikes, no debris General ITO glass properties • OLED grade, polished, very low roughness, high transmission • Standard conductivity range 7-20 Ohm/sq • Glass thickness 0.7-1.1 mm General FTO glass properties • Low roughness • Standard conductivity range: 7-13 Ohm/sq • Glass thickness 1.8-3 mm • >80% transmission Patterning of other conductive coatings or other structuring tasks Get in touch with us from 1.99 Euro per piece and 1 week delivery time
Transcript of Laser Patterned ITO and FTO Substrates - Automatic Research
www.automatic-research.deVisit us at
Laser Patterned ITO and FTO Substrates
High quality substrates for optoelectronic applications
Patterned/Structured by femtosecondlaser
Liquid crystal displays (LCD) technology
Organic light emitting diodes (OLED)
Organic photovoltaic and perovskite (solar) cells
Electrochemistry
Flat antennas for mobile communication
Conducting glass/Transparent electrodes
Transparent, conductive coatings on glass• Electrical conductivity and optical transparency• Homogeneously flat ITO/FTO coatings• Low roughness• Uniform transmission
Laser cut propertiesTypically 10-20 μm width, no shunts, no spikes, no debris
General ITO glass properties• OLED grade, polished, very low roughness, high transmission • Standard conductivity range 7-20 Ohm/sq • Glass thickness 0.7-1.1 mm
General FTO glass properties • Low roughness • Standard conductivity range: 7-13 Ohm/sq• Glass thickness 1.8-3 mm• >80% transmission
Patterning of other conductive coatings or other structuring tasksGet in touch with us
from 1.99 Euro per pieceand 1 week delivery time
Automatic Research GmbH
Immerwahrstr. 2 · c/o ZAE Bayern e.V.91058 Erlangen GermanyTel.: +49 (0) 9131 605 56 84 Fax: +49 (0) 9131 6844 890 [email protected]
20th March 2017www.automatic-research.deVisit us at
Our offerfrom only 1.99 Euro per pieceThe fastest available patterned substrates, delivery time from one week for customized substrates
Fast adaption of pattern, no lithographic masks needed, no additional setup costs
Lines down to 10 μm thin, and min. spacing 20 μm
Laser structured conductive layers with highest precision, thin cuts, completely isolating
No large ablated areas -> homogeneous surface improves solution processed layer quality
Substrate size up to 200 x 200 mm2
Get in touch for foil options: PET, ...
Whole kits with evaporation masks, aperture masks, encapsulation cover slips, sample holders and electronic measurement systems available
