Material: aliminium pipe Φ35mm

Weight: 0.5kg (standard 0.75kg)

Rubber hose x2

Hose band x4

Material: Titanium (T= 0.8mm) IN EX set

Weight: About 560g

IN EX

VALVE LIFT 10mm 9.5mm

ANGLE 260° 244°

MONSTER SPORT COMPLETE CARMONSTER SPORT COMPLETE CARMONSTER SPORT COMPLETE CARMONSTER SPORT COMPLETE CARLANCER EVOⅩ 360specLANCER EVOⅩ 360specLANCER EVOⅩ 360specLANCER EVOⅩ 360spec

PFX300 intake kitPFX300 intake kitPFX300 intake kitPFX300 intake kit+ Carbon intake shroud+ Carbon intake shroud+ Carbon intake shroud+ Carbon intake shroud

\75,000\75,000\75,000\75,000This kit combines the carbon shroudassembly (3PMA50) with the PFX300intake kit (3PBP20). By combining thetwo, fresh air can be taken into the aircleaner box more efficiently than itotherwise would be if the componentsare used separately.

http://www.monster-sport.com/e/parts/intake/super300kit/index.html

Full range computer set [JDM only]Full range computer set [JDM only]Full range computer set [JDM only]Full range computer set [JDM only]

[[[[TradeTradeTradeTrade----inininin]]]] \\\\95959595,,,,000000000000The best mapping was created overthe entire range at each point (fueland ignition timing) .This is developedin the same process as top categoryracing vehicles such as found racing inF1, WRC cars, and GT cars. Tuningcomputers currently sold in themarket use only pin point maps towhich the mapping is done by enginerunning only.http://www.monster-sport.com/e/parts/ecu/fullrange/index.html

Material: Titanium (T= 1.0mm)

Exhaust noise: 88-89dBhttp://www.monster-sport.com/product/parts/pipe/bypasspipe/index.html

High flow bypass pipeHigh flow bypass pipeHigh flow bypass pipeHigh flow bypass pipeRed Red Red Red , , , , BuffBuffBuffBuff \\\\19191919,,,,000000000000

Material: Stainless steel SUS304

http://www.monster-shop.jp/index.php?main_page=product_info&products_id=3231&language=en

\36,000\36,000\36,000\36,000

\44,000\44,000\44,000\44,000

\80,000\80,000\80,000\80,000

Requirement: Monster full range computer

Pipe diameter: φ70.0-60.5

Tail pipe diameter: φ101.6

Weight: 9.0kg

Tail type: Slash cut

\25,000\25,000\25,000\25,000

http://www.monster-sport.com/e/parts/turbo/ic_evo10/index.html

http://www.monster-sport.com/e/parts/turbo/sc_evo10/index.html

http://www.monster-sport.com/product/parts/eng_parts/ti_exmani/index.html

\295,000\295,000\295,000\295,000Titanium exhaust muffler XT200Titanium exhaust muffler XT200Titanium exhaust muffler XT200Titanium exhaust muffler XT200

Front pipeFront pipeFront pipeFront pipe Titanium exhaust manifold plateTitanium exhaust manifold plateTitanium exhaust manifold plateTitanium exhaust manifold plate

Pipe diameter: Φ70mm(original φ60mm

FlangeThickness

http://www.monster-sport.com/e/parts/exhaust/xt100/index.html

http://www.monster-sport.com/e/parts/exhaust/f-pipe-evo10/index.html

Front Engine side: 9mm

Rear CAT side: 8mm

Inter cooler pipe kitInter cooler pipe kitInter cooler pipe kitInter cooler pipe kit

Suction pipe kitSuction pipe kitSuction pipe kitSuction pipe kit

High Flow CamshaftHigh Flow CamshaftHigh Flow CamshaftHigh Flow Camshaft\85,000\85,000\85,000\85,000

The Monster intercooler piping kitimproves the suction efficiency fromthe turbo-charger exit to theintercooler and the intake manifold.

In an effort to improve the inhalationefficiency, the shape and the materialof the normal air intake pipe werechanged.To utilize maximum area in the limitedspace, the casting manufacturing

Attachements:

Model

Engine

Displacement

Bore × Stroke

Compression

Max Boost

Max Power

Max Torque

Standard replacement type[Use standard Air filter box]Dry filterSurface area: 4,130cm2

Material:CFRP Clear gel coat finish POWER FILTER productsMaterial: Carbon/clear gel coat finish

High pressure type 1.3Bar 20pcs setNut size: M12*P1.5 L32mmMaterial: Chromium Vanadium SteelMaterial [Cap]: Aluminium With Monster logo capAtachement: Adapter tool

http://www.monster-shop.jp/index.php?main_page=product_info&products_id=2525&language=en

Boost pressure control:

Fuel injection control:

Other optionsOther optionsOther optionsOther options

Change to 7,700rpm REV limiter:

Speed limiter:

Ignition time control:

Optimization

Change

Optimization

Cancellation

http://www.monster-sport.com/product/parts/eng_parts/oilfiller_cap/index.html

*Spring stopper is not attached.

Bolt pitch is M32×P3.5

Part number: 3PBP20Part number: 3PMA50Attachements: EPT sealer, sticker

An air intake duct designed to followoriginal shape and delivery fresh air tothe air cleaner box more efficiently.A portion of the original air cleaner

http://www.monster-sport.com/e/parts/exterior/heptagon_nuts/index.html

\47,000\47,000\47,000\47,000

http://www.monster-sport.com/product/parts/inlet/intake_shroud/index.html

Attachements: EPT sealer, stickerPFX300 Air filter, carbonduct,tape,rivet

Attachements

http://www.monster-sport.com/e/parts/intake/pfx300kit/index.html

Not to fit for EvoⅩ with fog lapms.

\2,800\2,800\2,800\2,800

Material:CFRP Clear gel coat finish

http://www.monster-shop.jp/index.php?main_page=product_info&products_id=349

Weight: About 0.5kg (standard0.75kg)

Material: Carbon fiber

This duct fits for standard oil cooler.

Mitsubishi Lancer Evolution Ⅹ

4B11

1,998cc

86.0×86.0mm

9.0

1.7k

Air Filter PFX300 [Dry type]Air Filter PFX300 [Dry type]Air Filter PFX300 [Dry type]Air Filter PFX300 [Dry type]\5,500\5,500\5,500\5,500

360ps

50.0kg

Full range ECU

SPECIFICATION

\10,000\10,000\10,000\10,000Radiator CapRadiator CapRadiator CapRadiator Cap

[[[[DuraconDuraconDuraconDuracon,,,,RedRedRedRed]]]]\\\\6666,,,,500500500500 [[[[BuffBuffBuffBuff]]]]\\\\7777,,,,500500500500Heptagon Wheel Nut SetHeptagon Wheel Nut SetHeptagon Wheel Nut SetHeptagon Wheel Nut SetOil filler capOil filler capOil filler capOil filler cap

Carbon intake shroudCarbon intake shroudCarbon intake shroudCarbon intake shroud

Carbon oil cooler ductCarbon oil cooler ductCarbon oil cooler ductCarbon oil cooler duct Pillar meter shroudPillar meter shroudPillar meter shroudPillar meter shroud

\30,000\30,000\30,000\30,000

http://www.monster-sport.com/product/parts/inlet/oilcoolerduct/index.html

Carbon \19,000 FRP\16,000Carbon \19,000 FRP\16,000Carbon \19,000 FRP\16,000Carbon \19,000 FRP\16,000Matte Gray\13,000Matte Gray\13,000Matte Gray\13,000Matte Gray\13,000

This duct fits for standard oil cooler.

Material: Carbon (clear gel coatedfinish) or FRP or FRP matte grayMeter size: Φ60, Depth less than 45mm

Material FRP (Black gel coat finish)

\22,000\22,000\22,000\22,000

Duct weight: About 350g

http://www.monster-sport.com/product/parts/inlet/oilcoolerduct/index.html http://www.monster-sport.com/product/parts/accessory/meterhood_evo10/index.html

For RHD.Defi ADVANCE CR,BE are available.Not to fit for EvoⅩ with fog lapms.

\38,000\38,000\38,000\38,000PFX300 intake kitPFX300 intake kitPFX300 intake kitPFX300 intake kit

FRP oil cooler ductFRP oil cooler ductFRP oil cooler ductFRP oil cooler duct

Conformity to 4 11 4B12 6B31Monster sport logo seal is attached.With Spring hole for spring stopper.

Duct weight: About 300g

MATTE GRAY

CARBONFRP

Attachements

Front spring: 5.1kgf/mmRear Spring: 5.4kgf/mm

http://www.monster-shop.jp/index.php?main_page=product_info&products_id=2217

Part No: ZZZE41 [Pin type]Size: 150*20mm [Emblem]

Type: Cutting \4,800\4,800\4,800\4,800 Type: CuttingSize: 500*27mm Size: 650*85mmPart No: ZZZB40 [Gun metal] Size: 100*15mm [Emblem] Part No: ZZZA25 [Gun metal]

Part No: ZZZB45 [Red], Part No: ZZZE31 [Pin type] Part No: ZZZA15 [Silver]

\1,000\1,000\1,000\1,000 \3,800\3,800\3,800\3,800 \2,000\2,000\2,000\2,000

Type: Cutting Type: Clear base Type: Clear baseSize: 450*95mm Size: 330*75mm [320*69mm] Size: 170*42mm [162*35mm]Part No: 896111-0000M Part No: 896112-0000M Part No: 896110-0000M

\4,000\4,000\4,000\4,000 \1,500\1,500\1,500\1,500 \500\500\500\500

-3 Ports

-Thin design(T=25mm)

-Correspondence to Oil filter Ti-100

\7,500\7,500\7,500\7,500

http://www.monster-sport.com/product/parts/eng_parts/radiator_hose/index.html

Hose x4Hose bandx8

\50,000\50,000\50,000\50,000

http://www.monster-shop.jp/index.php?main_page=product_info&products_id=3583&language=en

http://www.monster-sport.com/e/parts/eng_parts/oil_valve/index.html

the monster sport reinforced oilthermo valve opens at peak oiltemperature and does not open easilyat high engine rpm.

his product protects the engine fromover heated oil and assists in moreefficient oil cooler operation.

Reinforced oil thermo valveReinforced oil thermo valveReinforced oil thermo valveReinforced oil thermo valveOil Sensor AdapterOil Sensor AdapterOil Sensor AdapterOil Sensor Adapter\9,400

http://www.monster-sport.com/e/parts/eng_parts/oil_sensor/index.html

Lowering SpringLowering SpringLowering SpringLowering Spring

Compact light weight desigh adapter.Suitable for installing of oil pressureand temperature sensor.

OD φ42 ID φ32mm Thickness 5mm

Heat resistance 180

Radiator silicorn hose setRadiator silicorn hose setRadiator silicorn hose setRadiator silicorn hose set\24,000\24,000\24,000\24,000

Oil Filter Ti-100Oil Filter Ti-100Oil Filter Ti-100Oil Filter Ti-100\2,500\2,500\2,500\2,500

φ68x65 M20xP1.5Power filter Products

Aluminum Heel PlateAluminum Heel PlateAluminum Heel PlateAluminum Heel Plate\5,700\5,700\5,700\5,700

Color: Clear, Red, Blue

http://www.monster-sport.com/e/parts/interior/heelplate/index.html

Size [mm] P/N Price1000*120 896131-0000M \3,000745*90 896133-0000M \1,500370*45 896135-0000M \1,000Type: Cutting

Size [mm] P/N Price1000*120 896132-0000M \3,000745*90 896134-0000M \1,500370*45 896136-0000M \1,000

Part No: ZZZA40 [Gun metal]Size: 370*45mmType: Cutting

Sticker PDF list linkhttp://www.monster-sport.com/e/pdf/stickers_list.pdf

http://www.monster-sport.com/e/index.html

http://www.powerfilter.com/english/index.html

Type: Red base

Type: Cutting

\800\800\800\800Part No: ZZZB11

Part No: ZZZB10 (Discontinued)

Size: 300*84mm

Size: 60*16.5mm Size: 120*140mm Size: 120*34mmType: Silver base Type: White × Red Type: Silver base

\200\200\200\200 \800\800\800\800 \300\300\300\300Part No: 896113-0000M Part No: ZZZB30 Part No: ZZZB12

Part No: ZZZB20

Size: 290*84mm

Size: 362*75.5mm

Type: Clear base

Type: Clear base

\1,000\1,000\1,000\1,000

\1,000\1,000\1,000\1,000Part No: ZZZA30 [Silver]

Type: Cutting

\1,000\1,000\1,000\1,000

Size: 650*85mmPart No: ZZZA20 [Gun metal]

\2,000\2,000\2,000\2,000Part No: ZZZA10 [Silver]

2011/11/16