IN-Circuit Tester - WIT (Thailand Catalog_EN... · High Throughput and Easy Programming ICT...
2
780 620 1655 1000 310 345 490 450 360 Model IP-5800Z IP-5800ST IP-5800IL Measurement points 256pin(standard) ～ 1280pin 256pin(standard) ～ 2048pin 256pin(standard) ～ 2048pin Scanner Board 128pin / board Open/Short test Thresh hold 4 Ω～ 39.99M Ω Test time 900ms / 500 pin Component Test Test Step 16,000 step Test time 3 ～ 25ms / step Resistor 0.4 Ω～ 39.99M Ω Low value Resistor 20m Ω～ 399.9 Ω Capacitor 100pF ～ 39.99mF Inductor 10 μ H ～ 39.99H Diode/Transistor Vf=0.1V ～ 39.99V Zener Diode Vz=0.1V ～39.99V、 ～90V (option） Digital Transistor Bias=5V On/Off Opto couplers Bias=5V On/Off Jumper 4 Ω～ 39.99M Ω IC、Connector Short 4 Ω～ 39.99M Ω DC Voltage 0 ～± 39.99V Guarding Max 10 point Tolerance 1% ～ 999%, -100% or Abso. Pin-contact check Non Program Specifications Input Voltage AC90V ～ 260V, 500VA, 50/60Hz AIR 0.4 ～ 0.6MPa Condition 10℃～ 35℃ 20% ～ 80% Dimensions(mm) 360(W) × 450(D) × 490(H) 620(W) × 780(D) × 1655(H) 820(W) × 800(D) × 2178(H) ※ Height to top of patlite (warning light) when conveying surface is set 900mm Weight 25kg 140kg 250kg Controlled PC DOS /V PC Operating System Windows2000 / XP / 7 Fixture Fixture Size(mm) 500(W) × 315(D) × 150(H) 500(W) × 315(D) × 150(H) 420(W) × 300(D) × 150(H) Fixture Size(mm) 420(W) × 290(D) × 100(H) 420(W) × 290(D) × 100(H) 330(W) × 250(D) × omponent side45(H)/ soldering side20(H) Option Open Check Test I C、Connector Lead Open 800 800 100 820 1460 618 2178 http://www.witjpn.com I P-5800 series IP-5800Z ● IP-5800ST ● IP-5800IL In-line type IP-5800IL Compact type IP-5800 Z Standing type IP-5800ST ※ mm IP-5800ST High Throughput and Easy Programming ICT IN-Circuit Tester WIT Co.,Ltd. IP-5800 series specifications WIT Co.,Ltd . Head Office 8-1-5 Minaminagareyama, Nagareyama City, Chiba-Pref., Japan 270-0163 Tel. +81-4-7140-6085 Fax. +81-4-7140-6086 <Locations> China Shanghai Office Tel. +86-21-65535500 Fax. +86-21-65527706 China Shenzhen Office Tel. +86-755-83461500 Fax. +86-755-83461639 Thailand Bangkok Office Tel. +66-2237-2479 Fax. +66-2238-2024 Vietnam Hanoi Tel. +84-4-66843725 Fax. +84-4-37183163 The specifications and appearance of the products in this brochure are subject to change for improvement without notice. Printed in November. 2013
Transcript of IN-Circuit Tester - WIT (Thailand Catalog_EN... · High Throughput and Easy Programming ICT...
780 620
1655
1000
310345
490
450 360
Model IP-5800Z IP-5800ST IP-5800ILMeasurement points 256pin(standard) ～ 1280pin 256pin(standard) ～ 2048pin 256pin(standard) ～ 2048pinScanner Board 128pin / board
Open/Short test Thresh hold 4 Ω～ 39.99M Ω Test time 900ms / 500 pin
Component Test Test Step 16,000 step Test time 3 ～ 25ms / step Resistor 0.4 Ω～ 39.99M Ω
Low value Resistor 20m Ω～ 399.9 Ω Capacitor 100pF ～ 39.99mF Inductor 10 μ H ～ 39.99H Diode/Transistor Vf=0.1V ～ 39.99V Zener Diode Vz=0.1V ～ 39.99V、 ～ 90V (option） Digital Transistor Bias=5V On/Off Opto couplers Bias=5V On/Off Jumper 4 Ω～ 39.99M Ω IC、Connector Short 4 Ω～ 39.99M Ω DC Voltage 0 ～± 39.99V Guarding Max 10 point Tolerance 1% ～ 999%, -100% or Abso. Pin-contact check Non Program
Specifications Input Voltage AC90V ～ 260V, 500VA, 50/60Hz AIR 0.4 ～ 0.6MPa Condition 10℃～ 35℃ 20% ～ 80% Dimensions(mm) 360(W) × 450(D) × 490(H) 620(W) × 780(D) × 1655(H) 820(W) × 800(D) × 2178(H)
※ Height to top of patlite (warning light) when conveying surface is set 900mm
Weight 25kg 140kg 250kg Controlled PC DOS /V PC Operating System Windows2000 / XP / 7
Fixture Fixture Size(mm) 500(W) × 315(D) × 150(H) 500(W) × 315(D) × 150(H) 420(W) × 300(D) × 150(H) Fixture Size(mm) 420(W) × 290(D) × 100(H) 420(W) × 290(D) × 100(H) 330(W) × 250(D) ×
omponent side45(H)/soldering side20(H)
Option Open Check Test I C、Connector Lead Open
800 800 100
820
1460
618
2178
http://www.witjpn.com
IP-5800 series IP-5800Z ● IP-5800ST ● IP-5800IL
In-line type IP-5800IL
Compact type IP-5800 Z
Standing type IP-5800ST
※ mm
IP-5800ST
High Throughput and Easy Programming ICT
IN-Circuit TesterWIT Co.,Ltd.
IP-5800 series specifications
WIT Co.,Ltd.Head Office 8-1-5 Minaminagareyama, Nagareyama City, Chiba-Pref., Japan 270-0163 Tel. +81-4-7140-6085 Fax. +81-4-7140-6086<Locations>China Shanghai Office Tel. +86-21-65535500 Fax. +86-21-65527706China Shenzhen Office Tel. +86-755-83461500 Fax. +86-755-83461639Thailand Bangkok Office Tel. +66-2237-2479 Fax. +66-2238-2024 Vietnam Hanoi Tel. +84-4-66843725 Fax. +84-4-37183163
The specifications and appearance of the products in this brochure are subject to change for improvement without notice.
Printed in November. 2013
IP-5800 IL
Expand 16,000 Testing Step Expand 16,000 step , can be tested High density and high volume UUT.
You can chooes you to needs. IP-5800 series
Simple Operation, Space-saving, High speed
IP-5800Z
Compact type IP-5800 Z
Standing type IP-5800 ST
In-line type IP-5800 IL
Other Options
Option
1
3
2
Compact design, Small space
IP-5800Z is designed compact, available for small space andmove easily in the factory.
High Throughput test ing
The system is achieved for 40% higher throughput in compared with former system.
High Testing Accuracy
IP-5800 improve the repeat accuracy and Absolute accuracy apply for Digital measurement system. And Digital calibration will be reduced unstably measurement of temperature and Aging changing.
Kelvin measurement for low value resister testing
IP5800 provide Kelvin measurement for small resister testing on basic configuration.※ Need Scanner card for Kelvin measurement as option.
Power Up Charge Testing & Discharge testing IP5800 enables to protect the UUT’s electrical damage against electrical charging of Capacitor using this feature.
Conversion of fixture made for the other ICTThe fixture made for the other ICT can be converted to IP-5800 series ICT by adaptor.
Expand 128 Measurement Grouping
Expand 128 Group , IP5800 can be tested panel testing easily.
It can confirm a stable state with the measurement.
Safety Area Curtain
Keep more safer for operator during PDU is
down movement.
Safety Cover Keep more safer for operator during PDU is
down movement.
OK Stamp function
IP5800 can provide OK stamp function.
※ May need to modify the fixture.
Safety Cover
You can add three functions to the inspection situation.
Opens Check Test IC lead and Connector lead open failure testing with
Sensor plate.
Capacitor Polarity Test Capacitor Polarity check testing with Sensor plate.
High Voltage Zener Diode Test Zener Voltage can be tested 40V ～ 90V.
Expansion
-Max 1,280pin
-Opens Check Testing
(IC-Lead open fail
Detect)
Expansion
-Max 2,048pin
-Opens Check Testing
(IC-Lead open fail
Detect)
Expansion
-Max 2,048pin
-Opens Check Testing
(IC-Lead open fail
Detect)
