Home | Kewtech · 2018. 9. 26. · Go to to kewtechcorp.com for full specifications for full...
Transcript of Home | Kewtech · 2018. 9. 26. · Go to to kewtechcorp.com for full specifications for full...
-
Go to www.kewtechcorp.com for full specificationsGo to kewtechcorp.com for full specificationskewtech
corp
.com
PRODUCT2014catalogue
Kewtech Multifunction testers are renowned for their accuracy and repeatability
-
Go to www.kewtechcorp.com for full specifications
MultifunctionTesters
2
Go to kewtechcorp.com for full specifications
236VL - PE
ATT:ON
L-PEL-N
Limit:1.44Ω
49.9Hz
ΩTYPE:
01
UP
OK
CIRCUIT:DOWN
SELECT
SAVE MODEDATA No. 026
BOARD:
SITE:
MENU:
0105
R1+R2CL1
PAT CL1
500V
>1MΩ
MΩ234VL - PE
ATT:OFF
O.001ΩRes L-PEL-N
Limit:1.44Ω
49.9Hz
Ω
0.001Ω loop resolution
Advanced memory PAT Testing Max Zs limit on
The KT65 featured the best loop function with low susceptibility to noise & RCD uplift; the new KT65DL in addition boasts the following:
1) 0.001 Ohm resolution loop circuits for when you are close to the transformer
2) Loop testing down to 55V so you can now test 110V systems supplied by a centre tapped transformer
3) A selectable function enables you to insert the MCB / fuse type, rating and disconnection time.The Max Zs value is then displayed and the test result has a pass / fail indication.
The KT65DL has an Advanced Memory with fewer key strokes to save test results that can be assigned a circuit number and type of test. For instance, a continuity test can be saved as an R1 + R2, R2, rn, r1 or r2 measurement. This can be downloaded into the free software or a full (optional), 17th edition package.
The KT65DL enables you to swiftly undertake PAT testing in conjunction with the optional PAT adaptor1, catering for the mandatory Earth Bond and Insulation tests. It only takes two key strokes to save a result, the appliance ID is automatically incremented and the results can be downloaded into the free software.
The KT65DL is easy to use with many refinements including a dot matrix screen which allows more information on each screen. This means that the whole Auto RCD test results are displayed on one screen.
For dead testing there is constant live circuit monitoring, so inadvertently touching a live circuit with the test button locked down means no unwanted bangs. The instrument will simply tell you that you are connected to a live circuit.
The KT65DL has a lid and a soft carry case with room for all your essential testing accessories.
The NEW KT65DL: Continuity, Insulation, Loop, PSC/PFC, RCD, Phase Rotation, Volts, Earth Resistance, Max Zs Tables and Advanced Memory.
-
Go to www.kewtechcorp.com for full specificationsGo to kewtechcorp.com for full specifications
The NEW KT64DL: Continuity, Insulation, Loop, PSC/PFC, RCD and Volts
The KT64DL is the 65's little brother; you won't have to refer to the manual with this one! Rugged and reliable it also has loop circuits with less susceptibility to noise and RCD uplift.
The KT64DL has a lid and comes with a soft carry case with room for all your essential testing accessories.
3
MultifunctionTestersThe KT63: Continuity, Insulation, Loop, PSC/PFC, RCDThe KT63 is the small MFT packed with big features. As with all our MFTs it is easy to use, robust loop circuits, continually guards against live circuits when dead testing and has an auto RCD test as standard. What's more this one has a IP54 rating.
The KT63 comes in a hard case with all its test leads.
IP54
Go to kewtechcorp.com for full specifications
Remote test button probe provides an alternative way to start a test
The rotary dial and function keys mean a very straight forward user interface
Auto RCD test - all results on one screen
UL50VOK
AUTO
30mA
TYPE AC
X1/2 O°>2000ms
180°>2000msX1 O°19ms
180°27msX5 O°14ms
180°7ms
L-PE L-N
Class 1 PAT testing with the PAT Adaptor1.
-
Go to www.kewtechcorp.com for full specifications Go to www.kewtechcorp.com for full specificationsGo to kewtechcorp.com for full specifications
KT63 KT64DL KT65DL
Continuity at 200mA with auto null function for test leads
Insulation 250 V, 500 V & 1000 V
PAT testing with optional PAT adaptor 1 (page 6)
PAT results memory, auto ID advance and download with software
Continuous Live warning
55V loop test (tests 110V on-site systems)
High voltage LED light
Low current ATT non RCD trip loop test
High current loop test
PSC / PFC test
0.001 Ω resolution high current loop test
‘Hands free’ testing
Backlight
RCD type AC & ACS
RCD type A & AS
10mA & 1000 mA RCDs
RCD auto test 30 mA
RCD auto test 10, 30, 100, 300, 500, 1000 mA
RCD auto test all results on one screen
Test probe with remote test button
Advanced memory software included
Phase rotation
Earth resistance with optional ACCES KIT (page 17)
Protective lid on instrument
Carry case with extra space for testing accessories Hard Soft Soft
Fused test leads Option Option Option
IP40 / 54 54 40 40
Wiring & lead polarity check
Mains polarity check
Touch pad for earth potential limits 25 V or 50 V
Volts measurement
£775 £1,055 £1,2954
Easy to compile 17th edition certification
MultifunctionTestersCertification
TC1 - The base document that includes the schedule of inspections
PLUSThe results page TC5 for up to 12 ways and TC6 for up to 36 ways
TC3 - The base document – The Electrical installation Condition Report (formerly periodic inspection)
PLUSThe schedule of inspections.TC4 for less than 100A supply or TC8 for greater than 100A supply
PLUSThe results page TC5 for up to 12 ways and TC6 for up to 36 ways
TC2 is a standalone cert. for Minor Works & TC7 joins TC3 for extra observations when applicable
Fire Alarms: FIR1 LOG & FIRCERTEmergency lighting: EM1 LOG & EMCERT
For New Installations
For Existing Installations
-
Go to www.kewtechcorp.com for full specificationsGo to kewtechcorp.com for full specifications
Kewtech's KTD range offers outstanding value
KT41 KT42 KT45 KT56
High current loop test
Low current loop test ATT - non RCD trip of all types
Hi current non-trip loop test (D-Lok) of passive RCDs
Polarity check with LED indication
Does not require batteries
Lockdown button for ‘hands free’ operation
External earth probe for earth electrode testing
18 RCD test ranges plus DC test for type A RCDs
£317 £493 £519 £307
Live Testing - Loop & RCD
Code Description
KTD30 Digital insulation/continuity tester, auto-null, 'hands free' test mode, live circuit warning £239
KTD40 Digital Loop impedance tester, high and low 'no trip' test currents, 'hands free' test mode. PSC/PFC. Mains Lead included only (add ACC016E for dist. board lead set)
£299
KTD50 Digital RCD tester with auto test. Tests 30, 100, 300 & 500mA RCDs. Mains Lead included only (add ACC016E for dist. board lead set)
£239
KTD40 & KTD50 testers comes with a full socket polarity function
Kewtech's classic range for the traditionalist
KT31 KT35 KEW3125
Analogue (A) / Digital (D) (A) (D) (D)
Continuity 200mA
Insulation 250V 500V 1000V
Insulation 500V 1000V 2500V 5000V
Auto-null lead compensation
Live voltage warning
Lockdown button for ‘hands free’ testing
£264 £296 £847
Dead Testing - Insulation / Continuity
Installation KitsKT17A
KITKT17B
KITKT35
KT42
KT45
KT56
£1,055 £1,055
Single
5
Function17th Edition Testers
-
Go to www.kewtechcorp.com for full specifications Go to www.kewtechcorp.com for full specificationsGo to kewtechcorp.com for full specifications
PAT ADAPTOR 1Makes a PAT tester out of your multifunctionor insulation / continuity tester. For PATdocumentationuse PATLOG2.
£42.00
ACC50MTLFor long distance R2 & mains earth bond testing.50m of high quality multi-stranded test lead.
£95.00
KEWLOKLocking out device fits most toggle MCBs and Mains Switches - saves on multiple kits.
Includes warning labels.
£22.00
KEWCHECK R2 R2: For fast and secure testing of ring mains.
£22.00
£80.00
LIGHTMATE KITFor faster, safer testing at light fittings. Pouch contains fittings for BC, ES, GU10, SES, SBC
KEWCHECK R2 FLJust attach your own connector for any system.
£22.00
17th EditionAccessories
6
-
Go to www.kewtechcorp.com for full specificationsGo to kewtechcorp.com for full specifications
ACC040
The G7 range of test leads are strong and robust and come with universal 4mm and IEC Connectors, which means they fit all leading brands of test instruments.
ACC020
SOLTL1
ACC016E ACC065
ACC070 FUSE500FUSE10
KAMP12 KAMP13
CLA
MPS
DM
MS
KT61
KT62
KT63
KT64
KT65
KT31
KT35
KT41
KT42
KT45
KT56
KT60
KTD
30
KTD
40
KTD
50
ACC016E 3 Wire fused dist. board lead set with IEC connector £48ACC020 Two non-fused test leads with right angled 4mm connectors £32ACC040 2 Fused prods with croclips for use with ACC020 £32ACC060 2 Wire fused test leads with 4mm connectors £48ACC063 3 Wire non-fused test leads, 4mm connectors & piggyback earth £48ACC064SP Remote test probe for KT64 & KT65 £32ACC065 3 Wire non-fused dist. board lead set with 4mm connectors £53ACC070 3 Fused prods with croclips for use with ACC065 or ACC063 £43Fuse 500 Pack of 10 500mA 600V fast blow fuses £10Fuse 10 Pack of 10 10A fuses for test leads All fused test leads £10KAMP12 Mains Lead with 4mm connectors £27
KAMP13 Mains Lead with IEC connector £27JUMPLD 1 4 x Jump leads for insulation and R1+R2 testing at dist. boards £22SOLTL1 4mm PV panel test leads with quick release MC4 connectors £35
= Included as standard = Optional extra
JUMPLD1
Test
7
LeadsACC063ACC060
-
Go to www.kewtechcorp.com for full specifications Go to www.kewtechcorp.com for full specificationsGo to kewtechcorp.com for full specifications
KT1780LED and audible tone two pole tester.£63.00
KEWSTICK UNOThe UNO's latest innovative circuits means better performance.£17.00
VoltageDetection
KEWSTICK DUOPatent applied for dual sensitivity Voltage Detector. For reduced sensitivity simply press and hold the attenuation button. It features two colour LED feedback: a heartbeat (a green LED ) and voltage detection (a red LED and buzzer}.£25.00
KT1790LED, LCD and audible tone two pole tester.
£99.00
Slender ProbesFits into recessed terminals such as RCBOs without unscrewing any caps.
Built in TorchBrilliant white light gives ample illumination.
Clear IndicationIndication lights shine through voltage level.
Phase RotationBright green LEDs show left or right rotation.
NEW Clear oversize LEDs
NEW Bright torch light
NEW Clear audible tone
NEW UK Specific probe tips
Complies to the latest International Standards
Clear, bright & slender - the ultimate voltage detectors.
IP65
The Kewstick DUO in attenuation mode can detect between live and neutral when they are only millimetres apart.
8
-
Go to www.kewtechcorp.com for full specificationsGo to kewtechcorp.com for full specifications
KEWPROVE3Proving unit - works with all leading brands of two pole voltage detectors. Voltage jumps to 690 V then ramps down.
£95.00
The very latest in Portable Appliance Testing along traditional lines - tests your appliance not your patience!
Tests 230V appliances
Tests 110V appliances
200 mA Continuity
250 / 500V Insulation
230V Earth leakage – differential measurement
110 V Substitute leakage
230V Touch leakage
Large clear display
Extension lead and IEC lead tests
Calibrated earth bond lead
Adjustable pass / fail limits
Uses high impact resistance rotomoulded case with room for test leads - a self-contained tester
Tests in accordance with the IEE Code of Practice for in service inspection and testing of electrical equipment
PATTesters
KT76 Manual PAT Tester
TestingKits
KEWTK1Comprises: Lightmate Kit PAT adaptor 1 Kewstick UNO JUMPLD 1 Kewcheck R2 Kewlok
9
KEWIS02Kit includes: Kewprove3, KT1780, Kewlok, labels and pouch with belt strap.
£180.00
£199.00
-
Go to www.kewtechcorp.com for full specifications Go to www.kewtechcorp.com for full specificationsGo to kewtechcorp.com for full specifications
Complete PAT testing solutions from Kewtech enable fast, reliable testing and documentation for your PAT requirements
KT71 KT72 KT76 KT77Earth bond 200mA for IT equipment
Earth bond high current
Insulation test at 250V & 500V
Run leakage test at mains voltage (soft test)
Substitute leakage current 110V
Substitute leakage current 230V
Extension lead test
110V Appliances
230V Appliances
Automatic test sequences
Downloading
USB portable memory stick
Industrial roto-moulded case with lid
Thermoplastic case with lid
Mains powered
Battery powered (8 x AA batteries - included)
with optional adaptors £625 £575 £795 £1295
KT71
KT71 PAT Tester
Carrying case
EL110 PAT Kit - Adaptor plug
PATLOG2 Log book including pass labels
250 Fail labels Kewcheck 103 -
Mains wiring tester
Phillips Screwdriver
Slotted Screwdriver
Wire Cutters
Kewtech Pen
KT71 PRO KIT contains:
£795.00
As easy as 1,2,3.3. Press start!
2. Select yourchoice of test.
1. Plug in yourappliance
Mains powered
Automatic test sequences
PATTesters
10
-
Go to www.kewtechcorp.com for full specificationsGo to kewtechcorp.com for full specifications
Code Description KT71 KT72 KT76 KT77 Price
PATLOG 1 Manual log for multiple sites £19PATLOG 2 Manual log for single site £12LR Earth Long reach earth probe (ideal for monitors & fans) £34EL110 PAT KIT Adaptor enables 110V EB, ins. & ext. lead testing £48ELKIT 110, 230 & 400V adaptors £139500PASS 500 Appliance pass labels £16250FAIL 250 Appliance fail labels £11500VIS 500 Appliance visual Inspection labels £16KAMPS Short IEC lead for extension lead testing £22KEWSNAP 1 50 tags protects labels with clips for cables £42KEWSNAP 2 50 tags protects labels for use with cable ties £42ACCBARCODE Barcode reader £211ACC1000 Barcode labels 0 - 1000 £64
EL KIT
500PASS
KEWSNAP1/2LR EARTH
EL110PAT KIT
All the PAT testing options you’ll ever need.
PATLOG 2
Comes with Pass labels
Includes 110, 230 & 400V adaptors
Battery powered
Automatic test sequences
KT72
PAT AccessoriesTesting
11
500VIS
-
Go to www.kewtechcorp.com for full specifications Go to www.kewtechcorp.com for full specificationsGo to kewtechcorp.com for full specifications
12
Tests for 230V and 110V appliances
Standard and programmable test sequences
Sophisticated data capture with qwerty keyboard and fast recording systems
Fast versatile download via USB stick
Help screens
Expert and normal mode
Table of lead resistances
100 mA, 10A & 25A Continuity
250 / 500V Insulation
230V Earth leakage – differential measurement
110V Substitute leakage
Touch leakage
Large clear display
Extension lead and IEC lead tests
Calibrated earth bond lead
Selectable pass limits
Uses high impact resistance rotomoulded case with room for test leads - a self-contained tester
Tests in accordance with the IEE Code of Practice for in service inspection and testing of electrical equipment
Short cut keys & Qwerty keyboardThe only PAT tester with simple to use USB connectivity
Print out your own certificates
KEWPAT PRO SOFTWAREAnother strength of the KT77 is KEWPAT Pro, a simple to use software package that lets you store, manage and print out test certificates and reports. At only £245.00
KT77 Downloading Portable Appliance Tester PATTestersThe versatile fully comprehensive 230V and 110V downloading portable appliance tester
PATKIT ABuy all your downloading PAT testing equipment all at once. Contains everything you need.
KT77KEWPAT Pro softwarePass and Fail labelsKAMPS - IEC lead for
extension lead testing
£1695.00
-
Go to www.kewtechcorp.com for full specificationsGo to kewtechcorp.com for full specifications
13
KEWCHECK 103 High definition LEDs with clear audible tone. Indicates 14 wiring conditions.
£17.00
Easily identify those circuits with the Fusefinder. Complete with mains and fused test lead set.
£148.00
FUSEFINDER
103 106 107
Correct polarity at the socket Are there any wrong or mis-connections?
Quality of the earth loop Are all connections and the condition of the earth return path safe?
Checks Mains Polarity Polarity can also be incorrect at the incoming mains, this is very hazardous
RCD Check Tests for 30mA 1 x functionality
Advanced socket testersThe Loopcheck 106 & 107 can indicate the quality of the earth loop! (Standard socket testers only tell you that the polarity is correct at the socket.)
The 107 also checks polarity at the mains distribution board.
LOOPCHECK 106Full socket tester & loop check
£45.00
Socket Testers LOOPCHECK 107Full socket tester, loop check, RCD and mains polarity. Makes a great partner for PAT testers and covers RCD testing obligations for PAT testing.
£55.00
KEW8031FPhase rotation meter. Intuitive rotating disc type. New and old colour schemes. Fused test leads.
£148.00
KEW8035Non contact phase rotation meter. Just clip over insulation. For 2.4 - 30mm dia. cables.
£265.00
RotationPhase
-
Go to www.kewtechcorp.com for full specifications Go to www.kewtechcorp.com for full specificationsGo to kewtechcorp.com for full specifications
14
Meters
KT115 KT116 KT117 KEWMATE 2001
Max voltage AC/DC 600V 600V 600V 600V
Max current AC/DC 10A 10A 10A
Open jaw current AC/DC 100A
Resistance / Buzzer
Capacitance
Diode
Temperature
Frequency
Data hold
Min / Max
TRMS TRMS
Bar graph
£52 £74 £84 £122
Great value, great specification multimeters
MultimetersDigitalClamp
A clamp to suit all needs from earth leakage to Cat IV applications. These clamps have DMM functions - two products in one!
KT203Ideal for Solar Installations.
Code Description Price
KEW8008 10:1 ratio enables readings of up to 3000 A
£264
KEW8112 Clamp Adaptor for DMMs 0.1mA - 120A AC £264
CLAMP ADAPTOR
Clamp Adaptors&
-
Go to www.kewtechcorp.com for full specificationsGo to kewtechcorp.com for full specifications
15
Unit KT20
0
KT20
3
KT20
03A
KEW
2040
KEW
2046
R
KEW
2055
KEW
2056
R
KEW
2200
KEW
2300
RO
PEN
JAW
KEW
2432
KEW
2434
Max Current AC A 400 400 2000 600 600 1000 1000 1000 100 100 100
Max Current DC A 400 2000 600 1000 1000 100
Max Volts AC/DC V 600 600 1000 600 600 600 600 600
Minimum resolution A 0.01 0.01 0.1 0.1 0.1 0.1 0.1 0.01 0.1
Leakage (min resolution) mA 0.001 0.1
Selector to eliminate harmonics
Jaw size mm 33 33 55 33 33 40 40 33 10 40 28
Resistance (with buzzer)
Data Hold
Peak Hold
Min / Max (Max) (Max)
Sleep feature
Sleep feature can be overridden
TRMS TRMS TRMS TRMS
Non Contact Voltage detection
Capacitance
Frequency
Backlight
Temperature
Ideal for PV installations
£59 £95 £275 £122 £175 £144 £207 £85 £158 £529 £264
KEW2200Ultra slim AC clamp meter - ultra convenient! Designed to be your daily current measuring tool.
NEW
10mm
KEW2056RMarket leading Cat IV TRMS clamp meter.Clamp Adaptors
-
Go to www.kewtechcorp.com for full specifications Go to www.kewtechcorp.com for full specificationsGo to kewtechcorp.com for full specifications
Kewtech’s latest range of environmental instruments are specifically targeted at the electrical contractors’ legal requirements.
Range 40 000 LuxAdvanced auto-backlight
LCD display Min / max hold Beats minimum accuracy
requirement
£69.00
Range 40 – 130dB range Dedicated to A weighting – just what
the electrical contractor needs Beats minimum accuracy
requirement Advanced auto-backlight LCD
display Min / max hold
£59.00
Measures up to 30.00 m/s m/s to litres per second
conversion table Advanced auto-backlight LCD
display Min / max hold
£89.00
Measures up to 1999w/m2
High accuracy and rapid response sampling50mm LCD displayData hold freezes displayed valueMax/min data holdLow battery indication
£139.00
KEWVPV1 - Irradiance meter
KEWSL1 - Sound meter
KEWLM1 - Light meter
KEWAM1 - AnemometerSOLAR KIT1
KEWPV1 – Irradiance meterKT203 – AC/DC clamp meterCarry Case
£225.00
16
RangeEnvironmental
KEWSL1KEWLM1KEWAM1Carry case
£199.00
ENVIRON KIT 1 SOLT 14mm PV panel test leads with quick release MC4 connectors
£35.00
-
Go to www.kewtechcorp.com for full specificationsGo to kewtechcorp.com for full specifications
17
Continually validate your instruments through regular self-checking
12 comprehensive test points covering Loop / RCD and Insulation / ContinuityNull facility to remove lead resistanceEasy to useTough drop-proof watertight case
Checks all functions for all makes of 17th edition installation testers - Loop, RCD, Insulation / Continuity and Multifunction testers
Instrument ValidationFC2000
Code Description Price
KEW4105A Three / two wire Earth Resistance tester £317
KEW4200 TRMS Earth Resistance clamp meter £990
ACCES Kit Earth spike kit for KT65 £80
Use the KEW4105A for single earth spike systems and the KEW4200 for multi earth spike systems.
Code Description Price
FC2000 Comprehensive check box – enables you to comply with all your 17th edition monitoring obligations
£169
Checklog For recording your check box results £19
EarthResistance
-
Go to www.kewtechcorp.com for full specificationsGo to www.kewtechcorp.com for full specifications
18
Repair Calibration&
Kewtech offer a fast and efficient Bag&Tag calibration service. Should any of your instruments require calibration or repair simply follow the step by step guide.
Your step by step guide to using Bag&Tag...
Call Sarah at ExpressCal to arrange a Bag&Tag collection on 01302 761044.
STEP ONE
All calibrations will be completed on the day of receipt and any instruments requiring repair will be quoted before any work is carried out.
STEP THREE
REPAIR
QUOTATION
-
Go to www.kewtechcorp.com for full specificationsGo to kewtechcorp.com for full specifications
19
Instrument Name Calibration Trade Cost Fixed Price
Repair*Insulation / Continuity Tester £35 £125
Loop Tester £35 £125
RCD Tester £35 £125
Loop / RCD Tester £35 £125
Test Kit (3 Meters) £75 N/A
Multifunction Tester £75 £145
Manual PAT Tester £55 £125
Downloading PAT Tester £55 £225
Clamp Meter £35 £75
Multimeter £35 £35
Calibration Check Box £45 £95
Proving Unit £20 £35
Phase Rotation Meter £35 £55
Fuse Finder £35 £75
Light Meter £35 £55
Sound Level Meter £35 £55
Anemometer £35 £55
Earth Resistance Meter £35 £95
Infra Red Thermometer £35 N/A
Microwave Tester £35 N/A
Thermal Imaging Camera £95 N/A
Power Quality Analyser £155 £645
PriceList
*Kewtech instruments only
Collection will be made the same day if booked in before 12.30pm, otherwise it will be the following working day.
You will be contacted to take payment for work carried out. Once payment is received the instruments will be despatched for the next working day delivery.
STEP TWO
STEP FOUR
-
Go to www.kewtechcorp.com for full specificationsGo to kewtechcorp.com for full specifications
Trade17th EDITION SINGLE FUNCTION TESTERSKTD30 Digital 250/500/1000v Insulation/Continuity Tester - Hand held £239.00KT31 Analogue 250/500/1000V Insulation/Continuity Tester £264.00KT35 Digital 250/500/1000V Insulation/Continuity Tester £296.00KEW3125 High Voltage 5000V Insulation Tester £847.00KTD40 Digital Loop/PSC Tester with ATT - Hand held £299.00KT41 Digital Loop/PSC Tester £317.00KT42 Digital Loop/PSC Tester with D-Lok £493.00KT45 Digital Loop/PSC Tester with ATT £519.00KTD50 Digital RCD Tester - Hand held £239.00KT56 Digital RCD Tester £307.0017th EDITION TEST KITS / MULTIFUNCTION TESTERSKT17AKIT 17th Edition Kit KT35/KT42/KT56 with Carry Case £1,055.00KT17BKIT 17th Edition Kit KT35/KT45/KT56 with Carry Case £1,055.00KT63 Digital 6-in-1 Multifunction Tester with ATT £775.00KT64DL Digital 6-in-1 Multifunction Tester with ATT £1,055.00KT65DL Digital 8-in1 Multifunction Tester with ATT (Downloadable) £1,295.00PAT TESTERS & ACCESSORIESKT71 Manual PAT Tester with automatic sequences - mains powered £625.00KT71 PRO KIT Complete PAT Testing Kit including the KT71 £795.00KT72 Manual PAT Tester with automatic sequences - battery powered £575.00KT76 Manual 230 V & 110 V PAT tester £795.00KT77 Downloading 230 V & 110 V PAT tester £1,295.00PAT ADAPTOR 1 Portable Appliance Adaptor Box for 17th Edition Instruments £42.00KAMPS Short IEC Lead for extension lead testing £22.00PATLOG 1 PAT Testing Log Book can be used for multiple sites £19.00PATLOG 2 Manual Log for single site (ideal for PAT ADAPTOR 1) £12.00500PASS 500 Appliance Pass Labels £16.00250FAIL 250 Appliance Fail Labels £11.00500VIS 500 Appliance Visual Inspection Labels £16.00EL110PATKIT 110V Adaptor Kit for KT71 £48.00ELKIT EL110PATKIT Plus 110V 230V & 400V Adaptors £139.00ACCBARCODE Barcode Scanner for use with KT74 £211.00ACC1000 Barcode Labels for ACCBARCODE £64.00LR EARTH Long Reach (65mm) Earth Bond Probe £34.00KEWSNAP 1 50 Snap Tags with Clips £42.00KEWSNAP 2 50 Snap Tags without Clips (for cable ties) £42.00CLAMP METERSKT200 Digital 400A/600V AC Clamp Meter £59.00KT203 Digital 400A/600V AC/DC Clamp Meter £95.00KEW2003A Digital AC/DC 2000A Clamp Meter £275.00KEW2016R Digital AC 2000A Clamp Meter with True RMS £275.00KEW2040 Digital 600A AC 600V AC/DC Clamp Meter £122.00KEW2046R Digital 600A & 600V AC/DC Clamp Meter with True RMS £175.00KEW2055 Digital 1000A & 600V AC/DC Clamp Meter £144.00KEW2056R Digital 1000A & 600V AC/DC Clamp Meter with True RMS £207.00KEW2300R Digital AC/DC Fork Current AC 100A Tester with True RMS £158.00KEW2200 1000A & 600V AC Clamp Meter £85.00KEW2432 Digital 100A Earth Leakage Clamp Meter 0.001mA resolution £529.00KEW2434 Digital 100A Earth Leakage Clamp Meter 0.1 mA resolution £264.00KEW8112 Clamp Adaptor for 0.1mA - 120A readings £264.00KEW8008 Clamp Adaptor for up to 3000A readings £264.00MULTIMETERSKT115 Digital 600V & 10A AC/DC Multimeter £52.00KT116 Digital 600V & 10A AC/DC Multimeter with Temperature Measurement £74.00KT117 Digital 600V & 10A AC/DC Multimeter with True RMS £84.00KEWMATE 2001 Digital 600V & 100A AC/DC Multimeter with 1mm open clamp sensor £122.00
EARTH RESISTANCEKEW4105A Digital Earth Resistance Tester with Soft Carry Case £317.00KEW4200 Digital Earth Resistance Clamp Tester with True RMS £990.00CALIBRATIONFC2000 Fast Check Calibration Check Box £169.00CHECKLOG Log Book for Check Box Results £19.00VOLTAGE DETECTION - PHASE ROTATION - SOCKET TESTERSKEWSTICK UNO Non Contact Voltage Detector £17.00KEWIS02 KT1780, KEWPROVE3, KEWLOK, labels & Pouch £180.00KEWSTICK DUO Non Contact Voltage Detector - dual sensitivity £25.00LOOPCHECK106 Full Socket Tester with a loop check £45.00LOOPCHECK107 As LOOPCHECK106 with mains polarity and RCD test £55.00KEWCHECK103 Socket Tester with Audible Tone £17.00KEWCHECKR2 Socket Testing Adaptor £22.00KEWCHECK R2FL Socket Testing Adaptor with Flying Lead £22.00KT1780 Voltage/Continuity Tester with Phase Rotation Indicator £63.00KT1790 Digital Voltage/Continuity Tester with Phase Rotation Indicator £99.00KEW8031F Phase Rotation Tester £148.00KEW8035 Non Contact Phase Rotation Meter £265.00KEWPROVE3 Proving Unit £95.00CERTIFICATION BOOKS Used withTC1 Electrical Installation - 40 sheets TC5 or TC6 £19.00TC2 Minor Works Cert - 40 sheets £19.00TC3 Electrical Inst. Condition Report TC4 or TC8 & TC5 or TC6 £19.00TC4 Condition Report Insp. Schedule up to 100A TC3 £19.00TC5 Test Results for up to 12 ways TC1 or TC3 £19.00TC6 Test Results for 36 ways and greater TC1 or TC3 £19.00TC7 Observation Test Book TC3 £19.00TC8 Condition Report Insp. Schedule over 100 A TC3 £19.00EM1 LOG Emergency Lighting Log Book £19.00EM CERT Emergency Lighting Certificate £19.00FIR1 LOG Fire Alarm Log Book £19.00FIR CERT Fire Certificate £19.00TEST LEADS - 17th EDITION ACCESSORIES - LIGHTMATESACC50MTL 50m Extension Test Lead £95.00ACCES Kit Earth Spike and Lead Kit for KT65 £80.00ACC016E 3 Wire Distribution Board Test Leads with IEC Mains Plug £48.00ACC020 Non-Fused 2 Wire Test Leads with Right Angle Connectors £32.00ACC040 Fused Probes & Croc Clips (Set of 2) £32.00ACC060 2 Wire Fused Test Lead Set £48.00ACC063 3 Wire Non-fused Dist. Board Test Lead Set for KT63 £48.00ACC064SP Remote Test Probe for KT64 & KT65 £32.00ACC065 Non-Fused 3 Wire Multifunction Test Lead Set For KT64 & KT65 £53.00ACC070 Fused Probes & Croc Clips for KT64 & KT65 (Set of 3) £43.00FUSEFINDER 2 Fusefinder with Mains and Fused Test Lead Set £148.00JUMPLD1 Jump leads for insulation & R1+ R2 testing at distribution boards £22.00KAMP12UK Mains Lead for KT64 & KT65 £27.00KAMP13UK Mains Leads with IEC Plug £27.00KEWLOK Lock Out Device - Fits Most MCBs £22.00KEWTK1 Testing Accessory Kit £199.00LIGHTMATE KIT Kit of 5 Lightmates: BC, ES, GU10, SES, SBC £80.00SOLTL1 4mm PV Panel Test Leads with Quick Release MC4 Connectors £35.00ENVIRONMENTAL RANGE - SOLAR KITSKEWAM1 Anemometer £89.00KEWLM1 Light Meter £69.00KEWSL1 Sound Level Meter £59.00KEWPV1 Irradiance Meter £139.00ENVIRON KIT 1 KEWSL1 + KEWLM1 + KEWAM1 + Carry Case £199.00SOLAR KIT 1 KEWPV1 + KT203 + Carry Case £225.00
Kewtech Corporation Limited Sales: 01494 792 212 F: 01494 791 826 Tech: 01522 546 888 E: [email protected]
Price List