GX 2 system: X-C G2 and X-P G2 fasteners for interior ...€¦ · GX 2 system: X-C G2 and X-P G2...

4
03 / 2017 1 GX 2 fasteners D GX 2 system: X-C G2 and X-P G2 fasteners for interior finishing applications General information Material specifications Carbon steel shank: X-P G2 HRC 57.5 X-C G2 HRC 56.5 Zinc coating: 2–10 μm (X-P 14 G2 MX) up to 16 μm Recommended fastening tool GX 2 Approvals ICC ESR-1752 (USA): X-C 20 / 27 / 32 G2, X-P 14 / 17 / 20 G2 IBMB X-C 20 / 27 / 32 / 39 G2, X-P 17 / 20 G2 Dimensions X-P 14 G2 MX Examples L Ls 1.8 o 6.3 o 3 X-P 17 / 20 G2 MX o 6.6 L o 3 1.8 Ls X-C 20 / 27 / 32 G2 MX L Ls 1.9 o 6.3 o 2.75 X-C 39 G2 MX 40.9 39 o 2.6 1.9 o 5.8 Product data Applications Drywall tracks Light-duty applications in construction

Transcript of GX 2 system: X-C G2 and X-P G2 fasteners for interior ...€¦ · GX 2 system: X-C G2 and X-P G2...

Page 1: GX 2 system: X-C G2 and X-P G2 fasteners for interior ...€¦ · GX 2 system: X-C G2 and X-P G2 fasteners for interior finishing applications General information Material specifications

03 / 2017 1

GX 2 fasteners

D

GX 2 system: X-C G2 and X-P G2 fasteners for interior finishing applications

General information

Material specifications

Carbon steel shank: X-P G2 HRC 57.5 X-C G2 HRC 56.5

Zinc coating: 2–10 μm

(X-P 14 G2 MX) up to 16 μm

Recommended fastening tool

GX 2

Approvals

ICC ESR-1752 (USA): X-C 20 / 27 / 32 G2, X-P 14 / 17 / 20 G2IBMB X-C 20 / 27 / 32 / 39 G2, X-P 17 / 20 G2

Dimensions

X-P 14 G2 MX

Examples

L

Ls1.8

o 6.

3

o 3

X-P 17 / 20 G2 MX

o 6.

6

L

o 3

1.8 Ls

X-C 20 / 27 / 32 G2 MX

L

Ls1.9

o 6.

3

o 2.75

X-C 39 G2 MX

40.9

39

o 2.6

1.9

o 5.

8

Product data

Applications

Drywall tracks Light-duty applications in construction

Page 2: GX 2 system: X-C G2 and X-P G2 fasteners for interior ...€¦ · GX 2 system: X-C G2 and X-P G2 fasteners for interior finishing applications General information Material specifications

Thickness of base material

Application requirements

70

hmin

dnom

t II

Concrete Steel

Thickness of fastened material

GX 2 fasteners

2 03 / 2017

D

Recommended loads

Load data

Nrec Vrec

Nails (base material: concrete / sand-limemasonry) Nrec [kN] Vrec [kN] hET [mm]

0.4 0.4 ≥ 27

0.3 0.3 ≥ 22

0.2 0.2 ≥ 18

0.1 0.1 ≥ 14

Nails (base material: steel)Nrec [kN] Vrec [kN]

0.4 0.4

Design conditions:

• Minimum 5 fastenings per fastened unit• All visible failures must be replaced

hmin = 60 mm (dnom ≤ 3.0 mm)

tll ≥ 4.0 mm (for nail)

Wooden track: tl ≤ 24 mmMetal track: tl ≤ 2 mm

Page 3: GX 2 system: X-C G2 and X-P G2 fasteners for interior ...€¦ · GX 2 system: X-C G2 and X-P G2 fasteners for interior finishing applications General information Material specifications

03 / 2017 3

GX 2 fasteners

D

Spacing and edge distances (mm)

8040

40

804080

Spacing along track All track ends (cut-outs for doors),secure with 2 nails

70100160-800

2280

Edge distance for concrete/sand-lime masonry

Edge distance for steel

Fastener spacing on wood:

Corrosion information The intended use only comprises fastenings which are not directly exposed to external weather conditions or moist atmospheres. For further detailed information on corrosion see relevant chapter in Direct Fastening Principles and Technique section.

40068

10

12

14

16

18

20

500 600 700450 550 650 Steel strength, Rm [N/mm2]

Stee

l thick

ness

, tII [

mm]

S355Jxx

S275Jxx

S235Jxx

Steel

Application limits

X-P 14 G2

≥15

≥ 4.5 dnom

Page 4: GX 2 system: X-C G2 and X-P G2 fasteners for interior ...€¦ · GX 2 system: X-C G2 and X-P G2 fasteners for interior finishing applications General information Material specifications

Fastening quality assurance

hNVStI

hCS

tI

hNVStI

X-C / X-P G2 MX:hNVS = 2 – 5 mm

X-C 39 G2 MX and X-C 32 G2 MX:hCS = 2 – 3 mm

X-P 14 G2 MX:hNVS = 2 – 7 mm

GX 2 fasteners

4 03 / 2017

D

Fastener selection

Nails in concrete / sand-lime masonry Nails in steel

Nail Selector for GX 2

X-C 27 G2 MXX-C 20 G2 MX

X-C 39 G2 MXX-C 32 G2 MX

X-C 20 G2 MXX-P 17 G2 MX X-P 14 G2 MXX-C 20 G2 MX

Gas can GC 52 - For all base materials