GEOROUTE PRODUCT CUT SHEET -...
2
A SOLUTION COMPLIANT WITH THE CLASSIFICATION OF MTQ TABLE 13101-1 : • MTQ Type II : Reinforcement of unpaved roadway structure or of low resistance soil; • MTQ Type III : Drainage trenches in fine soils (>50 % with 80 μ sieve) – Anticontamination infrastructure – Separation of two soil types; MTQ Type IV : Drainage trenches in coarse soils (<50 % with 80 μ sieve) – Filter behind wall; • MTQ Type V : Shore protection by rockfill; • MTQ Type VI : Ditch protection by granular cover. Based on the 76 Series, the Georoute Series is optimized for road works and meets the specific requirements of the Ministère des Transports du Québec (MTQ) in all respects. This line comes in several types of products (from Type I to Type VI), each having particular functions adapted to the type of work performed within the framework of road building projects. These products are certified by the Bureau de normalisation du Québec as to their compliance with protocol BNQ 7009-910. Allows reduction in thickness of foundation required Available in a large array of formats Complies with MTQ Table 13101-1 and BNQ certified GEOROUTE GEOTEXTILES MEETING QUEBEC TRANSPORT STANDARDS WITHOUT GEOTEXTILE WITH GEOTEXTILE PRODUCT CUT SHEET FUNCTIONS SECTORS FILTRATION SEPARATION WATERPROOFING REINFORCEMENT DRAINAGE PROTECTION Municipal and Landscape Architecture Roads and Transportation Industrial and Waste Management Natural Resources and Energy ADVANTAGES Contributes to the cohesion of the structure and to the sustainability of road works
Transcript of GEOROUTE PRODUCT CUT SHEET -...
A SOLUTION COMPLIANT WITH THE CLASSIFICATION OF MTQ TABLE 13101-1 :• MTQ Type II : Reinforcement of unpaved roadway structure or
of low resistance soil;• MTQ Type III : Drainage trenches in fine soils (>50 % with 80 μ sieve)
– Anticontamination infrastructure – Separation of two soil types; MTQ Type IV : Drainage trenches in coarse soils (<50 % with 80 μ sieve) – Filter behind wall;
• MTQ Type V : Shore protection by rockfill;• MTQ Type VI : Ditch protection by granular cover.
Based on the 76 Series, the Georoute Series is optimized for road works and meets the specific requirements of the Ministère des Transports du Québec (MTQ) in all respects. This line comes in several types of products (from Type I to Type VI), each having particular functions adapted to the type of work performed within the framework of road building projects. These products are certified by the Bureau de normalisation du Québec as to their compliance with protocol BNQ 7009-910.
Allows reduction in thickness of foundation required
Available in a large array of formats
Complies with MTQ Table 13101-1 and BNQ certified
GEOROUTE
GEOTEXTILES MEETING QUEBEC TRANSPORT STANDARDS
WITHOUT GEOTEXTILE WITH GEOTEXTILE
PRODUCTCUT SHEET
FUNCTIONS SECTORS
FILTRATION SEPARATION WATERPROOFINGREINFORCEMENTDRAINAGEPROTECTION
Municipal and Landscape Architecture
Roads and Transportation
Industrial and Waste Management
Natural Resources and Energy
ADVANTAGES
Contributes to the cohesion of the structure and to the sustainability of road works
SPECIFICATIONS
Description GEOROUTE Type 2, Type 3 & 4, Type 5, Type 6
Product type Nonwoven needled polypropylene geotextile (Type 2 : woven / nonwoven geocomposite)
Format Roll
GEOROUTE, properties which make a difference
Properties measured Test method Unit Interpretation
Mechanical
Surface density ASTM D5261 g/m² Measures the density of the material in order to evaluate its protection capacity.
Breaking strength
CGSB 148.1-7.3 NIndicates the geotextile's capacity to absorb tensile forces before reaching its breaking point.
Breaking elongation
CGSB 148.1-7.3 % Quantifies the elongation the product can bear before breaking.
HydraulicFiltration opening
size FOSCGSB 148.1-10 μm
Indicates the size of soil particles which can pass through the geotextile under hydrodynamic conditions.
A LINE OF PRODUCTS MEETING THE REQUIREMENTS OF TABLE 13101 OF THE MINISTÈRE DES TRANSPORTS DU QUÉBEC :
• Georoute Type 2 and Georoute Geo-9 comply with MTQ Type II requirements;
• Georoute Type 3 & 4 complies with MTQ Type III and MTQ Type IV requirements;
• Georoute Type 5 complies with MTQ Type V requirements;
• Georoute Type 6 complies with MTQ Type VI requirements.
THE BNQ CERTIFIED GEOROUTE TEXEL LINE, A GUARANTEE OF QUALITY
The certification of geotextiles in Quebec by the Bureau de normalisation du Québec (BNQ) is based on the technical criteria of the GCTTG 3001-06 specification which imposes maximum variation tolerances for 8 properties related to the evaluation of the quality of geotextiles used in roadwork :
• Mechanical properties : - Resistance to traction - Breaking elongation - Puncture resistance - Tearing strength - Bursting resistance
Furthermore, the GCTTG 3001-06 specification sets certain obligations regarding packaging, labeling and identification of products. The compliance of Texel geotextiles to BNQ requirements is confirmed by a compliance certificate issued for the factories as well as by the publication of information regarding the type of geotextile and the product specifications of the Georoute line.
• Hydraulic properties : - Permittivity - Filtration opening size (FOS)• Sustainability properties : - Resistance to UV rays (500 h)
1300, 2e rue, Parc industrielSainte-Marie-de-Beauce (Québec)G6E 1G8 CANADA
IMPORTANT NOTICE - The information included in this document is presented for status and promotion purposes only. Therefor, all the characteristics of the project have not been mentioned. Texel and his partners do not offer any guarantee in regards of the previous information.
This table presents a summary of specifications. We invite you to consult updated information sheets and detailed technical specifications on our website at www.texel.ca.
NAME IT.WE’LL DO IT.
NEED TO KNOW MORE ?
Call our representatives to discover the advantages
of the GEOROUTE for your projects!
1-800-463-0088
SPEC SHEET
www.texel.ca
