GENERAL MARINE ACCESSORIES - Attwood Marine Products

46
ANCHORING & MOORING · ROD HOLDERS & ACCESSORIES COCKPIT & INTERIOR · ELECTRICAL · TRAILERING TRANSOM SAVERS · TIE-DOWN STRAPS GENERAL MARINE ACCESSORIES

Transcript of GENERAL MARINE ACCESSORIES - Attwood Marine Products

ANCHORING & MOORING · ROD HOLDERS & ACCESSORIESCOCKPIT & INTERIOR · ELECTRICAL · TRAILERING

TRANSOM SAVERS · TIE-DOWN STRAPS

GENERAL MARINE ACCESSORIES

GENERAL MARINE ACCESSORIES

88

9943

Description DescriptionBulkPackagingΔ

AftermarketPackaging

Aluminum - painted 8 lbs. 9941-1 —

10 lbs. 9942-1 —

15 lbs. 9943-1 —

Black PVC-coated 8 lbs. 9941B1 —

10 lbs. 9942B1 —

15 lbs. 9943B1 —ΔAll Bulk Packed anchors include ID label with UPC number/bar code.

Mushroom AnchorsMushroom anchors are an economical solution for light-weight boats. The wide-area mushroom cup provides sufficientholding power in mud and weed bottoms• Gray cast iron• Large, steel eye• Available coated with aluminum-painted finish or black PVC coated finish

Description DescriptionBulkPackagingΔ

AftermarketPackaging

Aluminum - painted 10 lbs. 9933-1 —

15 lbs. 9934-1 —

20 lbs. 9935-1 —

Black PVC-coated 10 lbs. 9933B1 —

15 lbs. 9934B1 —

20 lbs. 9935B1 —ΔAll Bulk Packed anchors include ID label with UPC number/bar code.

Navy AnchorsNavy anchors combine weight with flukes to dig in and hold firmly in sand and mud. The reverse action of the shank allowsquick retrieval of a fouled anchor. High-quality gray iron casting, available with aluminum-painted or black PVC-coated finish.

ANCHORING AND MOORING EQUIPMENT

9935

9948

9948B

Description DescriptionBulkPackagingΔ

AftermarketPackaging

Aluminum - painted 8 lbs. 9944-1 —

12 lbs. 9945-1 —

15 lbs. 9948-1 —

18 lbs. 9946-1 —

Black PVC - coated 8 lbs. 9944B1 —

12 lbs. 9945B1 —

15 lbs. 9948B1 —

18 lbs. 9946B1 —ΔAll Bulk Packed anchors include ID label with UPC number/bar code.

River Anchors—CastRiver anchors catch and hold river bottoms where mud, rocks, stumps, and brush are present. Flukes act like a grapplinghook to snag rocks or other objects. Gray cast iron with a large, steel eye and black PVC-coated or painted finish.

89

GENERAL MARINE ACCESSORIES

PENETRATING FLUKE ANCHORSPenetrating fluke anchors dig into mud, sand, or gravel, and stow flat. Pivoting flukes rotate downward into bottom. Excellentweight-to-holding power ratio, compared to cast anchors. All Attwood penetrating anchors are manufactured of hot dipgalvanized steel for corrosion-resistance and strength. The assembly is arc-welded steel that maintains consistent fluke-to-shank angles, ensuring quick penetration and a firm hold.

9956

Specifications

Part No. A B C D

9955-1 22.25" 18.38" 12.20" 10.0"

9956-1 28.18" 21.0" 14.50" 11.0"

9957-1 32.0" 24.0" 16.50" 12.0"

Description DescriptionBulkPackagingΔ

AftermarketPackaging

#8 8 lbs. 9955-1 —

#13 13 lbs. 9956-1 —

#18 18 lbs. 9957-1 —ΔAll Bulk Packed anchors include ID label with UPC number/bar code.

Solid Shank Penetrating AnchorsThese anchors have a solid shank for durability and strength.

9960

Specifications

Part No. A B C D

9960-1 13.85" 11.50" 8.75" 8.0"

9961-1 16.35" 13.25" 8.88" 8.88"

9962-1 19.85" 14.25" 9.50" 10.0"

9963-1 21.85" 21.0" 12.0" 12.0"

DescriptionBulkPackagingΔ

AftermarketPackaging

#5 9960-1 —

#7 9961-1 —

#10 9962-1 —

#13 9963-1 —ΔAll Bulk Packed anchors include ID label with UPC number/bar code.

Slip-Ring Penetrating AnchorsFeature a slip-ring shank for easy retrieval of a snagged anchor.

11964

DescriptionBulkPackagingΔ

AftermarketPackaging

3 lbs. 11964-1 —

5 lbs. 11966-1 —

7 lbs. 11968-1 —ΔAll Bulk Packed anchors include ID label with UPC number/bar code.

Grapnel Folding AnchorsIdeal four-fluke anchor for personal watercraft (PWC), small craft, and dinghies. Heavily galvanized, malleable iron. Folds upeasily for storage. Lockable in opened or closed position.

90

GENERAL MARINE ACCESSORIES

13762

Description DimensionsBulkPackaging

AftermarketPackaging*

Hot dip galvanized 1/4" x 4' — 13752-5

PVC-coated 1/4" x 4' — 13762-45/16" x 5' — 13764-4

*Poly Bag (Galvanized) or Individual Carton (PVC-coated)

Anchor ChainsAnchor lead chain for use on penetrating anchors to hold down the shank so anchor lies flat. Increases holding strength,especially in strong currents, high winds, and coastal waters. Protects line from chafing on sharp rocks. These anchor chainsinclude a welded, oversized link on each end for easy installation and anchor attachment. PVC-coated models protect againsthull and deck abrasions.

9911

DescriptionLine Diameter

OverallLength

BulkPackaging

AftermarketPackaging*

Galvanized steel 1/4" 2" — 9911-3

Galvanized steel 5/16" 23/16" — 9912-3

Galvanized steel 1/2" 25/8" — 9913-3

Galvanized steel 5/8" 31/2" — 9914-3*Skin Pack

ThimblesThimbles join rope to rope, chain, or shackle. Constructed of heavy-duty, galvanized steel to resist deforming.

12401

DescriptionPinDiameter

U-ShankOpening Length

MaximumSafe Load

BulkPackaging

AftermarketPackaging*

Galvanized steel 5/16" 3/8" 113/16" 1,500 lbs. 9922-1 9922-3

Galvanized steel 3/8" 1/2" 115/16" 2,400 lbs. 9923-1 9923-3

Galvanized steel 1/2" 3/4" 27/8" 5,000 lbs. 9924-1 9924-3*Skin Pack

DescriptionPinDiameter

U-ShankOpening Length

MaximumSafe Load

BulkPackaging

AftermarketPackaging*

Stainless steel 3/16" 7/16" 17/16" 900 lbs. — 12401L3

Stainless steel 1/4" 1/2" 19/16" 1,500 lbs. — 12403L3

Stainless steel 5/16" 5/8" 21/16" 2,000 lbs. — 12405L3

Stainless steel 3/8" 3/4" 27/16" 3,000 lbs. — 12407L3

Stainless steel 1/2" 1" 31/4" 5,000 lbs. — 12409L3*Skin Pack

ShacklesBow-style shackles connect anchor, chain, and components together. Allow thimble to swivel when anchor gear is in constantmotion. Hole in clevis pin to secure with safety wire. Available in economical galvanized steel for freshwater or formedstainless steel for strength and corrosion-resistance.

13752

91

GENERAL MARINE ACCESSORIES

10257Description

Max.HullThickness

installation Hole Size

BulkPackaging

AftermarketPackaging*

Anchor line spool 1" 1/2"-dia. 1025-1 1025-7*Clam Shell

Anchor Rein™ Anchor LiftProvides 32' of retractable, 1/4" braided, nylon anchor line neatly spooled on aspring-loaded reel. The entire reel mechanism is concealed in a protective canisterwhich installs easily beneath the deck or gunwale, leaving only the Perma-PlatedZAMAK handle and stainless steel line ring exposed. When it’s not in use, thehandle serves as a convenient cleat. Loosen the handle to unreel the line, thentighten the handle to stop and lock the line at any point. Can also be used with asnap hook to tie-off on brush or timber.

13702

DescriptionBulkPackaging

AftermarketPackaging*

Deluxe — 13702-4

Standard — 13700-7*Individual Carton (Deluxe) or Clam Shell (Standard)

“Lift ’n Lock” Anchor ControlEasy-to-use anchor lift and pulley system supports anchors up to 20 pounds with 1/4"- to 7/16"-diameter line (sold separately). Deluxe Anchor Control• High-impact, reinforced nylon• Stainless steel shafts• Easy pull-up, lock, and releaseStandard Anchor Control• Economical zinc-plated, steel anchor lift• Nylon pulley system• Steel sheave controls anchor from any position

13700

MOORING ACCESSORIES

Description ColorBulkPackaging*

AftermarketPackaging**

4"-dia. x 16" L White — 9354D1

Blue — 9354BD1

5"-dia. x 22" L White — 9355D1

Blue — 9355BD1

6"-dia. x 24" L White — 9356D1

Blue — 9356BD1

8"-dia. x 28" L White 9358-1 —

Blue 9358B1 —*Bulk Fenders Include UPC Label

** PDQ Display Carton with Bulk Fenders Include UPC Label

SoftSide Oval Shape Mooring FendersThese fenders may look simple…but they're loaded with featuresthat make them a dramatic improvement over earlier models.

• Molded from a lightweightpolymeric material that is soft to thetouch and easy on hulls…butresistant to UV, chalking, splittingand crushing

• Double-molded eye ends for extrastrength

• Seamless one piece construction• Oval shape and ribbed sides resist

rolling against hull• Guaranteed for Life against splitting

or bursting

92

GENERAL MARINE ACCESSORIES

11843

Description DescriptionBulkPackaging

AftermarketPackaging*

Fender Lines 1/4" x 5' (.64 x 152.4cm) — 11843-53/8" x 5' (.95 x 152.4cm) — 11844-5

*Poly Bag, pair

Double Braid Fender Lines• 5' Long• Spliced one end

9947

DescriptionBulkPackaging

AftermarketPackaging*

22" long, white — 9947-3*Skin Pack, pair

Mooring SnubbersAn ideal shock absorber for small boat mooring and docking lines. Eases strain on mooring lines caused by wind or tides.High-tensile rubber construction resists saltwater, fuels, and acids.

11575

DescriptionBulkPackaging

AftermarketPackaging*

2" W x 1" H — 11575-3*Skin Pack, pair

Mooring Fender Lock KitQuickly and easily install or move fenders when mooring. Tie fender line onto key, then insert key into lock. Two flush-mountstainless steel mounting plates and two stainless steel keys. Fasten with two #10 fasteners. Accepts up to 1/2" rope.

Mooring Line SnubbersIncreases the life of dock lines and reduces stress on cleats and stanchionsGreat protection against the stresses of wind and waves while dockedHighly elastic rubber buffers the boat from dock line shock loads

14147, 14148, 14149

Description DescriptionBulkPackaging

AftermarketPackaging*

12mm snubber 3/8" Line — 14147-2

16mm snubber 1/2" - 5/8" Line — 14148-2

20mm snubber 5/8" - 3/4" Line — 14149-2*Hang Tag

93

GENERAL MARINE ACCESSORIES

HOOKS AND HOLDERS

11731L3

DescriptionBulkPackaging

AftermarketPackaging*

13/8" L x 1" H 11731-1 11731L3*Skin Pack, pair

Fender Hooks—Stainless SteelFor holding mooring lines anywhere on the boat or dock. For rope up to 3/8" diameter. Two counter-sunk holes, 5/8" apart.Stamped stainless steel construction.

11556L3

DescriptionBulkPackaging

AftermarketPackaging*

31/2" L x 1" W — 11556L3*Skin Pack, pair

Boat Hook Holders—Stainless SteelPolished, stamped stainless steel holders keep boat hooks, poles, gaffs, and nets stored within easy reach. For polediameters up to 11/4".

11557L3

DescriptionBulkPackaging

AftermarketPackaging*

Holds poles up to 1 1/2"-dia. — 11557L3*Skin Pack, pair

General Purpose Storage ClipsAn economical way to hold and store boat hooks, mop handles and other poles. Stainless steel.

11810Description

BulkPackaging

AftermarketPackaging*

Extends 31/2' to 8' — 11810-5*Poly Bag

Boat HooksTelescoping adjustment collar has molded ribbing – easy to grip and twist for length adjustment, even when wet. High-quality 6061-T6 aluminum tubing with marine finish and rubber vinyl grips. Hook heads are die-cast aluminum withpolyethylene tips.

94

THE FISHING LEADER!

FULL-RANGE SELECTION

• “GOOD, BETTER, BEST” CHOICES

ONE SIMPLE MOUNTING SYSTEM

• PRO-SERIES, “2-IN-1” AND MINI RIGGER

USE INTERCHANGEABLE BASES

• ONE MOUNT FITS ALL

THE FISHING LEADER!

• MAKE ATTWOOD YOUR FISHING SOURCE

• NOW, MORE THAN EVER, ATTWOOD IS YOUR BEST SOURCE

FOR ADJUSTABLE ROD HOLDERS AND INTERCHANGEABLE

MOUNTS! WE THINK YOU’LL AGREE — ATTWOOD’S

COMPREHENSIVE SELECTION HAS YOU COVERED FOR

ALL TYPES OF ROD HOLDERS!

95

GENERAL MARINE ACCESSORIES

Quick Cam Lock Adjustment Spinning Rod and Reel

Description ColorBulkPackaging

AftermarketPackaging*

With side mount Black — 5002-7

White — 5003-7

With flush mount base Black — 5004-7*Clam Shell

Rod Holders with MountsPro-Series rod holders are designed for use with casting and spinning rods. Heavy-duty, deep-tooth gear lock securely holdsrod holder in mounting bases.

Casting Rod and Reel5002

5003

5004

PRO-SERIES

Pro-Series Rod Holders and AccessoriesBased on research with tournament fishermen, Attwood has created the “Pro-Series” line of molded rod holders. Try Pro-Series once and you’ll see why it’s such a pleasure to use. To keep things simple, all of the Pro-Series mounting bases areinterchangeable with original “2-In-1” rod holders. And, all this is available below the price of many competitive models.Check out the Pro-Series unique, patented features.

96

GENERAL MARINE ACCESSORIES

“2-In-1” Rod Holders“2-In-1” Rod Holders are manufactured to rugged specifications with tough, durable polycarbonate. Each holder includes agear-lock mounting base. These patented, “2-In-1” rod holders feature a dual-position locking ring. The ring opens with asnap so the rod is fingertip-ready when the fish strikes. A single up-and-out motion removes the rod and sets the hook.

RH-40

Casting Rod and Reel Spinning Rod and Reel

Description ColorBulkPackaging

AftermarketPackaging*

Side mount Black — RH-40

White — RH-40W

Flush mount Black — RH-42

White — RH-42W*Clam Shell

“2-In-1” AdjustableFeatures large, easy-grip lock-nut for easy adjustment. 180° vertical adjustmentrange for a variety of rod tip height settings. Heavy-duty, deep-tooth gear-lockmounts securely in base.Use with casting rods and spinning rods, from ultra-lightto heavy action. Rod throat opening fits large rods up to 15/8"-diameter. Lockingring fits all sizes of spinning reel handle shanks up to 11/16"-diameter.

Patented

RH-46

Description ColorBulkPackaging

AftermarketPackaging*

Side mount Black — RH-46

Black, pair — RH-4646*Clam Shell

“2-In-1” Non-AdjustableFeatures fixed vertical angle to optimize rod positioning. Smaller size is perfect for medium and light action gear. Rod throatopening fits most standard and ultra-light rods up to 13/16"-diameter. Locking ring fits spinning reel handle shanks up to 7/16"-diameter.Available in single package or promotional double-pack.

RH-40W

RH-42

RH-42W

97

GENERAL MARINE ACCESSORIES

PRO-SERIES MOUNTING BASESConvenient, interchangeable mounting bases are a hallmark of the Attwood Pro-Series,“2-In-1”, and Mini Rigger fishing systems. These new bases come in three styles forinstallation on any type of boat. They provide 360º lift-and-turn horizontal adjustment andfail-safe retention. The locking keyway prevents removal of a rod holder or Mini Riggeruntil it is turned directly inboard.

Description ColorBulkPackaging

AftermarketPackaging*

Round/square rail mount up to 1" Black — RM-32-7

White — RM-32W-7*Clam Shell

Rail MountAttaches side mount to round or square rail,1"-diameter and smaller. For use with 5020or 5021 Side Mount. Complete with twostainless steel U-bolts, nuts, adapters, andheavy aluminum pre-drilled backing plates.

RM-31Description

BulkPackaging

AftermarketPackaging*

Square rail mount up to 11/2" — RM-31*Clam Shell

Square Rail MountAttaches side mount to large square rail,11/2" and smaller. For use with 5020 or 5021Side Mount. Complete with two stainlesssteel U-bolts, nuts, and heavy aluminumpre-drilled backing plate.

Locking Feature

5022 OpenDescription Color

BulkPackaging

AftermarketPackaging*

Flush mount Black — 5022-7

White — 5023-7*Clam Shell

Flush MountMounts flush to gunwale or deck. Easy open cover conceals fasteners and elastomeric liner seals water out. When closed, low profile, smooth, contoured design avoids snagging lines.

5020

Description ColorBulkPackaging

AftermarketPackaging*

Side mount Black — 5020-7

White — 5021-7*Clam Shell

Side MountMounts to vertical surface.

5023 Closed

5021

Description ColorBulkPackaging

AftermarketPackaging*

Pedestal base Black — 5024-7

White — 5025-7*Clam Shell

Pedestal MountMounts to gunwale or deck.

RM-32

5025

5024

98

GENERAL MARINE ACCESSORIES

DescriptionBulkPackaging

AftermarketPackaging*

Mini rigger with harness — 9703-7*Clam Shell

Mini Rigger KitA complete package to start downrigger fishing. Ideal for the value conscious fisherman. The Mini Rigger bringscontrolled-depth trolling capabilities even to small boats. It is designed to operate with one hand. Features easy griphandle and a swivel head pulley to respond to line movements. Strong, lightweight reinforced polycarbonate. One fullturn equals one foot of line. Adjustable disc-brake-drag slip-clutch locks in line depth and slips if weight snags. Kitincludes 100' of stainless steel line, 4 pound cannonball weight, snap swivel, a side mount (5020), and line release.

99

GENERAL MARINE ACCESSORIES

“Sure Grip” Steel Rod Holders with Stainless Steel Stems and Wing NutsAttwood’s line of “Sure Grip” Steel Rod Holders are the perfect complement to our molded Pro-Series and “2-In-1” rodholders. They are designed for drift fishing, pan fishing, crappie, and more. Make Attwood your single source for all typesof rod holders!

5060

5062

5063 5064 5065

DescriptionBulkPackaging

AftermarketPackaging*

5° Angle, 4" S.S. Stem & Wing Nut, For horizontal rod position, includes 5071 mounting base

— 5060-3

5° Angle, 8" S.S. Stem & Wing Nut, For horizontal rod position with added clearance, includes 5071 mounting base

— 5061-3

25° Angle, 4" S.S. Stem & Wing Nut, For drifting or trolling.

Includes 5071 mounting base — 5062-3

Includes a pair of rod holders and 5071 mounting bases

— 5066-7

45° Angle, 4" S.S. Stem & Wing Nut, For trolling, includes 5071 mounting base

— 5063-3

10° Angle, 4" S.S. Stem & Wing Nut, For long handle bait casting rods.

Includes 5071 mounting base — 5064-3

Includes a pair of rod holders and 5071 mounting bases

— 5067-7

10° Angle, 4" S.S. Stem & Wing Nut, For bait casting rods, includes 5071 mounting base

— 5065-3

* -3 = Skin Pack; -7 = Clam

“Sure Grip” Steel Rod HoldersThe 3/8" diameter coated steel rod is tough, strong, and corrosion-resistant. U.V. resistant plastic coating protects the rod buttand handle. And the exposed stem and wing nut are stainless steel for years of corrosion-resistant use.

5070

5071

5072

5074

DescriptionBulkPackaging

AftermarketPackaging*

Side mount base, fits gunwale or rail — 5070-3

Flush base, fits 2" flat surfaces — 5071-3

Flat rail base, fits square rail — 5072-7

V-Round rail base, fits round rail up to 1"-dia. — 5073-3

Clamp-On rail base, fits round rail up to 7/8"-dia. — 5074-3* -3 = Skin Pack; -7 = Clam

“Sure Grip” Mounting BasesAttwood “Sure Grip” mounting bases fit a variety of mounting surfaces including rails. Constructed of extruded aluminum.

5061

100

GENERAL MARINE ACCESSORIES

66470

6636266462

6636366463

DrainageReceptacle(Standard Series2" diameter only)

66465

Open End

6636466464

Closed End BasePolished end has drainage opening

for 14-18 NPT fitting

Description DiameterEndType

FlangeShape

TubeLength

BulkPackaging

AftermarketPackaging*

CLOSED END 2" DIAMETER ROD HOLDERS

30° Stainless flush mount holder 2" Closed Round 9" 66470-1 —

Cap-gasket for 30° holder 1472-1 —

0° Stainless flush mount holder 2" Closed Round 9" 66471-1 —

Cap gasket for 0° holder 1471-1 —

STANDARD SERIES 2" DIAMETER ROD HOLDERS

30° Stainless flush mount holder 2" Open Oval 71/2" 66362-1 66362-7Δ

Cap-gasket for 30° holder 1478-1 —

15° Stainless flush mount holder 2" Open Oval 71/2" 66363-1 66363-7Δ

Cap-gasket for 15° holder 1477-1 —

0° Stainless flush mount holder 2" Open Oval 71/2" 66364-1 66364-7Δ

Cap-gasket for 0° holder 1476-1 —

Drainage receptacle for 2" models 1479-1 —

BIG GAME SERIES 21/4" DIAMETER ROD HOLDERS

30° Stainless flush mount holder 21/4" Open Oval 11" 66462-1 —

Cap-gasket for 30° holder 1481-1 —

15° Stainless flush mount holder 21/4" Open Oval 11" 66463-1 —

Cap-gasket for 15° holder 1482-1 —

0° Stainless flush mount holder 21/4" Open Oval 11" 66464-1 —

Cap-gasket for 0° holder 1483-1 —

Stainless backing plate for 21/4" rod holders 66465-1 —Δ= Includes Cap-Gasket *Clam Shell

Stainless Steel Flush Mount Rod HoldersAttwood stainless steel rod holders answer the need for the finest in finish, function and durability The holders are available in30º, 15º, and 0º configurations in standard 2" diameter or in the robust 21/4" diameter Big Game Series. All stainless steel rodholders have these outstanding features, including optional custom-casting or electrolytic etching of your logo in the flange.Contact your Attwood representative for details.

66471

Closed End

101

GENERAL MARINE ACCESSORIES

DescriptionBulkPackaging

AftermarketPackaging*

Stainless Steel Rod Holder — 66970-7*Clam Shell

Clamp-On Rod Holders—Stainless Steel304 Stainless steel with black plastic liner. Can be used on vertical or horizontal rails. Adjustable for rails 7/8" to 1" in diameter.9" Length, 13/4" inside diameter tube.

12708

Description DescriptionBulkPackaging

AftermarketPackaging*

Aluminum straps — 12708-5*Poly Bag

Rod Holders—PVCDurable white PVC tube side mounts with polished, pre-drilled aluminum utility straps. 9" long, holds 13/4"-diameter orsmaller grips.

12750

DescriptionBulkPackaging

AftermarketPackaging*

Black ABS frame, black foam — 12750-6

White ABS frame, black foam — 12751-6*Blister Pack, Pair

Rod Storage HolderHolds up to 3 fishing rods. Closed-cell foam insert protects rod. Mounts vertically or horizontally. 83/4" L x 21/2" W.

11855

DescriptionBulkPackaging

AftermarketPackaging*

Rod Rack — 11855-4*Individual Carton

Rod Rack with Knife and Plier HolderUV-Stabilized off-white high density plastic. Easily cleaned with soap and water.

Rod Holders—PlasticDurable plastic construction. No liner needed. Holder is angled at 30º for proper rod tip tension. Installation hole size:21/2"-diameter. Flange has three holes for 1/4" screws. Accommodates standard rod grip sizes under 11/2"-diameter.

66970

12700

Description ColorBulkPackaging

AftermarketPackaging*

ABS plastic White 12700-1 12700-5

Black 12701-1 12701-5*Poly Bag

12701

102

GENERAL MARINE ACCESSORIES

DescriptionBulkPackaging

AftermarketPackaging*

Graph Mount — 16002*Individual Carton

Graph Mount• 12" arm• Rotates allowing easy visibility from all directions• Mount removes quickly and easily• Durable, aluminum construction• Black powder coated• Depthfinder shown is not included

5000

5650

Pre-Drilled Max. TorqueBulkPackaging

AftermarketPackaging*

For MotorGuide trolling motors with 07 and 16 mounts. Also retro fits 01and 15 mounts.Comes with glass filled plastic mounting pads and step pad covers.

2,604 – lb.-in. — 5000

For MotorGuide trolling motors with 20.5 and 21 mounts.Also retro fits 20 and 25 mounts. Comes with aluminum mounting pads.

6,540 – lb.-in. — 5650

For MotorGuide trolling motors with 23.5 and 24 mounts. Also retro fits 23 and 26 mounts. Comes with aluminum mounting pads.

6,540 – lb.-in. — 5750

REPLACEMENT PARTS

Pad for Trol-Lock (non-locking) — SP-501

Pad for Trol-Lock (locking) — SP-504

Step cover — SP-503*Individual Carton, (SP)Replacement Parts = Polybag

Trol-Lock™ Motor MountUnique, Trol-Lock products let you remove trolling motors in seconds• Pre-drilled for MotorGuide trolling motors• 51/2" x 201/2" black powder coated base with 51/2" diameter mounting plates.• Perfect for fish-and-ski and pontoon boats• Choice based on torque application

(Lbs. of thrust x shaft length = torque lb. – inches.)

16002Does not include

depthfinder

103

GENERAL MARINE ACCESSORIES

COCKPIT AND INTERIOR ACCESSORIES

8314

Description Center CapBulkPackaging

AftermarketPackaging*

13"-diameter rim — 8314-1 —

Black plastic — 8315-4

Center cap Black plastic 8324-1 —*Individual Carton

Soft Grip Steering WheelIdeal steering wheel for bass boats, sport boats, and runabouts. Patented design provides a comfortable, firm grip.Contemporary styling with soft black PVC outer rim and high-impact, one-piece plastic inner core. Resists UV rays to preventfading. Soft Grip is non-magnetic so it will not interfere with compass readings. 33/8" deep dish. Fits all standard 3/4" taperedshafts and conforms to ABYC P-22 and ISO 8848• 8314 NMMA “As Approved”: 090070; CE Certificate WATT005• 8315 NMMA “As Approved”: 090071; CE Certificate WATT004

2906

DescriptionOverallLength Sheeve Groove Dia.

BulkPackaging

AftermarketPackaging*

Swivel 4" 2" 2906-1 2906-3*Skin Pack

PulleysNon-magnetic 300 series stainless steel body and strap with plastic sheave for wire rope tiller lines. The pulley strap isincluded. Meets ABYC Standard P-18. Swivel pulley rotates 360° on vertical axis. Open eye design for easy installation.Simply mount the strap and attach the pulley. Shrouded body design keeps tiller line in sheave track.

8043

DescriptionBulkPackaging

AftermarketPackaging*

For 3/16" to 1/4" dia. line 8043-1 8043-3*Skin Pack

Tiller Line ClampTwo screws lock plates together to hold tiller lines in place. Die-cast ZAMAK with chrome finish.

2716

Specifications

DimensionsDoor Inside

InstallationHole Size

133/4" L x 5 1/2" H 11 3/4" L x 4" H x 6 5/8" D 12" L x 4 1/4" H

DescriptionBulkPackaging

AftermarketPackaging*

Black with brushed chrome accent 2716-1 2716-4

Cream 2721-1 —*Individual Carton

Sportline Glove BoxesConstructed of durable, lightweight plastic with accent. Door opens and closes easily on a stainless steel hinge pin and lockswith a marine locking latch. Glove box door can be hot stamped with boat manufacturer’s logo or molded in custom colorsfor a nominal tooling charge. Contact your Attwood representative for information.

2638

Specifications

DimensionsDoor Inside

InstallationHole Size

133/4" L x 5 1/2" H 11 3/4" L x 4" H x 6 5/8" D 12" L x 4 1/4" H

DescriptionBulkPackaging

AftermarketPackaging*

Black 2638-1 —

Replacement lock and keys 2638-20-1 —

Standard Glove BoxPlastic box and door are light-weight, yet sturdy. Door opens and closes easily on a stainless steel hinge pin and locks with amarine locking latch.

104

GENERAL MARINE ACCESSORIES

6258A

Description DescriptionBulkPackaging

AftermarketPackaging*

Small 83/8" L x 21/4" W 6258A1 6258A3

Large 87/8" L x 33/8" W 6259A1 —*Skin Pack, pair

Step PadsDurable step pads in two sizes for different gunwale widths. Pads prevent slipping on wet, high-traffic areas. Black vinylinsert surrounded by a stainless steel frame. Two or four holes for #8 screws.

Description DescriptionBulkPackaging

AftermarketPackaging*

4 1/2" L x 3" W x 1 3/4" H Chrome plastic 11475-1 11475-3*Skin Pack

Low Profile HornLow profile, compact horns mount almost anywhere and provide a powerful tone for boating safety. Meets ABYC standardsfor boats up to 16.4 ft. (5 meters). Meets USCG standards for boats up to 39.4 ft. (12 meters). A completely sealed soundunit. Features a solid cover, diaphragm, vibration-dampening pad and mounting bracket. Pre-wired. For 12-Volt D.C.systems only.

11477

DescriptionBulkPackaging

AftermarketPackaging*

3" L x 3 1/4" W x 1 3/4" D — 11477-3*Skin Pack

Hidden Horn KitMounts below deck or behind dash or console. Meets ABYC standards for boats up to 16.4 ft. (5 meters), and USCGstandards for boats up to 39.4 ft. (12 meters). Heavy-duty marine construction. For 12-Volt D.C. systems only.

2460

DescriptionBulkPackaging

AftermarketPackaging*

8" H x 31/2" W 2460-1 2460-7*Clam Shell

Bellow Signal HornLung-powered horn does not use CO2, Freon, or batteries. Designed for personal protection and safety on land and on water.Meets U.S. Coast Guard Rule 33 (Annex III) and Federal/EPA regulations.

6259A

11475

HORNSAll three horns are tested and meet ABYC requirements.

105

GENERAL MARINE ACCESSORIES

MIRRORSNote: In some states and provinces, ski mirror of a certain size/dimension, and/or an onboard observer may be required.Check local requirements.

13065Description

BulkPackaging

AftermarketPackaging*

11 3/4" W x 4" H, Adjustable — 13065-4*Individual Carton

Wide View Ski MirrorFor installation on windshields 1/2" to 1" thick (or thinner with customer’s own spacer). Provides extra-wide mirror for safevisibility. Molded plastic frame, polished convex mirror, and adjustable base that adjusts to any position up-and-down or side-to-side, then secures in desired location. Includes allen wrench.

Description DimensionsMax. Windshield Thickness

BulkPackaging

AftermarketPackaging*

Perma-Plate®, Adjustable 75/16" W x 21/2" H 3/4" — 9083-7

Chrome-plated, Adjustable 7" W x 31/4" H 1" — 13055-4*Individual Carton

Chrome Ski MirrorUniversal mount installs on dash or windshield. Shatterproof, 180° convex mirror eliminates blind spots. Mirror is compactand constructed of lightweight chrome plated zinc ZAMAK. Mirror adjusts to any position up-and-down or side-to-side, thensecures in desired location.

Description ColorBulkPackaging

AftermarketPackaging*

Holds 100' of 1/4"-dia. rope Yellow — 13159-5*Hang Tag

Rope ReelConvenient swivel handle rope reel gets the tow line back on board fast! Large capacity. Allows two-handed rope winding forquick tow line retrieval and storage. High-impact polyethylene in bright, high-visibility yellow.

13055

11875

DescriptionBulkPackaging

AftermarketPackaging*

Floating Key Buoy — 11875-7*Clam Shell

Floating Key Buoy• Water Resistant• Cover snaps tight for storage of small items• Distinctive orange top for easy visibility

11866

Description DimensionsBulkPackaging

AftermarketPackaging*

Plastic Ball Type 21/4" x 3/4" — 11866-6

Plastic Flat Type 17/64" x 251/64" x 5/16" — 11829-6*Blister Card

Whistles• Perfect for attachment to life vests a signal whistle• Lanyard included

9083

11829

13159

106

GENERAL MARINE ACCESSORIES

DRINK HOLDERS

11788

11789W

11845

11672

Description DescriptionBulkPackaging

AftermarketPackaging*

4" H x 43/8" W White — 11631-4

Black — 11635-4*Individual Carton

Gimbal-Mounted Cup and Drink HoldersSelf-leveling drink holders with slot for coffee cup handle. For boats, cars, and RVs. Molded plastic. Includes gimbaledsurface-mounting bracket. Self-draining.

Recessed Drink HoldersAvailable in sizes for a variety of cans, bottles, and glasses. Each has holes for self-draining.

DescriptionBulkPackaging

AftermarketPackaging*

Standard — 11670-4

Large, with slot for mug handle — 11672-4*Individual Carton

Formed Wire Drink HoldersFormed, chrome-plated steel wire drink holders are ideal for boats, cars, and RVs. Includes a gimbaled surface-mountingbracket that keeps drinks level to prevent spills. Includes mounting screws.Cooler not included.

Description Description ColorBulkPackaging

AftermarketPackaging*

Dual Ring Polycarbonate construction 45/8" H x 49/16" W x 43/4" D

Black 2445-1 2445-7

White 2449-1 2449-7

Single Rigid Ring Molded ABS plastic 37/8" H x 33/4" W

Black 11654-1 11654-3

White 11661-1 11661-3*-7= Clam Pack (2445, 2449) -3= Skin Pack (11654, 11661)

Fold-Up Drink HoldersTwo easy-to-use, fold-up designs. Holds coffee mugs with a handle, 12-ounce cans, or drink insulators. Mount quickly andeasily on boats or RVs. On dual-ring models, flip the small ring up to hold small drinks; for large drinks, flip the small ringdown and use the large ring. When not in use, flip ring(s) down and close the cover for convenient storage. 7/8" closed depth.Four holes for #10 screws.

11670

11631

Description DescriptionBulkPackaging

AftermarketPackaging*

Regular, Black 17/8" D x 3"-dia. 11787-1 —

Deep, Black 27/8" D x 3"-dia. 11788-1 —

Large, Black 31/8" D x 33/4"-dia. 11789-1 —

Large, White 31/8" D x 33/4"-dia. 11789W1 11789WD1

Large, SS 31/8" D x 33/4"-dia. 11845-1 11845D1

*UPC label in PDQ carton

11654

2445

107

GENERAL MARINE ACCESSORIES

STORAGE CADDIESStorage caddies keep your boat organized. Easy-to-mount suction cups stay secure, even in roughconditions. Caddies can be mounted in back or on the bottom and can be permanently attached withscrews. Non-corrosive white plastic.

DescriptionBulkPackaging

AftermarketPackaging*

Cockpit Caddy — 11849D2*Hang Tag

Cockpit CaddyGreat organizer for fishing gear and personal items.Has slots for fillet knife, pliers and over 22 lures.

DescriptionBulkPackaging

AftermarketPackaging*

Cell Phone/GPS Caddy — 11850D2*Hang Tag

Cell Phone/GPS CaddyHolds most handheld GPS units and cell phones with 2 storage compartments

DescriptionBulkPackaging

AftermarketPackaging*

Cruiser Caddy — 11848D4*Hang Tag

Cruiser CaddyLarge storage space holds personal items and a beverage. It has slots for 3 lures and space for handled mug.

11852D5

DescriptionBulkPackaging

AftermarketPackaging*

Drink Holder — 11852D5*Poly Bag

Drink HolderHolds 12-ounce cans with a cooler or handled mugs and includes a can cooler.

11850D2

11851D2

11848D4

DescriptionBulkPackaging

AftermarketPackaging*

Lure Rack — 11848D4*Individual Carton

Lure RackThe lure rack holds up to 25 lures plus a filet knife and pliers. It has slots for fillet knives.

11849D2

108

GENERAL MARINE ACCESSORIES

11807Telescoping Pole

DescriptionBulkPackaging

AftermarketPackaging*

Deck Brush Kit — 11807-2*Card Pack

Deluxe Deck Brush Kit

Kit includes:• Soft brush with squeegee end for gentle scratch free cleaning• Telescoping aluminum pole with flow through design has water on/off

switch and comfortable foam grips• Nylon boat hook attachment

DescriptionBulkPackaging

AftermarketPackaging*

Coasters — 11867D7*Blister Card

Coasters• Nautical pattern• Set of 4

11867D7

DescriptionBulkPackaging

AftermarketPackaging*

Stainless Steel Boater's Key — 66500-3*Skin Pack

Boater's Key Pocket Tool KitLike a tool box in your hand. At just 31/2" high, it's amazing how much work the boater's key can do. Made of high qualitypolished stainless steel. 8 tools for a thousand uses.• Garboard Plug Wrench 9/16" – standard size for garboard and other plugs• Deck Keys for Fuel and Water Fills. 2 sizes, fits Attwood and most others• Shackle Key • 1/4" Slotted Screwdriver • Hex Head Wrenches 5/16" and 7/16"• Bottle Opener

11847D1DescriptionBulkPackaging

AftermarketPackaging*

"Welcome Aboard" Mat — 11847D1*Rolled with Wrap Label

"Welcome Aboard" Mat• Navy with white lettering• Heavy rubber backing• 173/4" x 231/2"(45 cm x 59.7cm)• Stands up to the elements and looks great!

66500

109

GENERAL MARINE ACCESSORIES

DescriptionBulkPackaging

AftermarketPackaging*

Boarding Ladder — 11864-2*Hang Tag

2-Step Boarding Ladder • Non-anodized aluminum tubing• Polyethylene steps• 11" (27.94cm) hooks and support legs• Folds flat for storage

11869

DescriptionBulkPackaging

AftermarketPackaging*

Waterproof Lock — 11869-7*Clam Shell

Waterproof LockIncludes 2 keys. Made to withstand the elements.

DescriptionBulkPackaging

AftermarketPackaging*

Waterproof Playing Cards — 11856D1*UPC/Hand Tab

Waterproof Playing Cards • Great for boating or camping• 100% plastic is both clear and durable, if they get wet, just dry them off and keep playing!• Plastic storage case.

11864

11856D1

11865

DescriptionBulkPackaging

AftermarketPackaging*

Rope Ladder — 11865-4*Individual Carton

Rope Ladder• White, 5 step boarding ladder • Sturdy 113/4'' blow molded steps• Textured step surface for sure footing• Steps connected by a nylon rope with top loop that quickly secures to cleat or railing• Colorful, attractive display box

Textured Steps Collapsible

110

GENERAL MARINE ACCESSORIES

14136

DescriptionBulkPackaging

AftermarketPackaging*

Bottle Opener — 14136-6

*Blister Card

Bottle Opener• Made of 304 polished stainless steel, stamped and formed• 11/2" W x 3"H (3.8cm x 7.62cm)• Fastens with #8 screws

14137

DescriptionBulkPackaging

AftermarketPackaging*

Cooler Mounting Kit — 14137-7

Replacement Straps — 14138-6*-7 = Clamshell; -6 = Blister Card

Cooler Mounting Kit

• Coolers corners stay put with straps• Prevents injury, boat and cooler damage• Quick disconnect strap design• Corrosion proof• Fastens with #8 screws

11870D2

DescriptionBulkPackaging

AftermarketPackaging*

Marine RV Hose — 11870D2*Hang Tag

Marine RV Hose• White• 5/8" x 25'

11871

DescriptionBulkPackaging

AftermarketPackaging*

Spiral Hose — 11871-7*Clam Shell

Spiral Watering Hose• 3/8" I.D. x 25' Long• 3/4" End Fittings• Easy to Store• No tangles! Always kink-free• Weatherproof

111

GENERAL MARINE ACCESSORIES

DescriptionBulkPackaging

AftermarketPackaging*

American Flag, 12" x 18" — 14120-7*Clam Shell

Deluxe Sewn American flag• 12" x 18" (30.5cm x 45.7cm)• 100% nylon• Brass grommets• Reinforced headings and double stitching for extra durability

14122

DescriptionBulkPackaging

AftermarketPackaging*

Halyard Clips (pair) — 14122-6

Antenna Clips (pair) — 14123-6*Blister Card

Flag Clips• Made of stainless steel• Spring loaded for easy installation• Attaches to either halyards, antennas or outrigger lines

FLAGS & FLAG ACCESSORIES

14120

14121Rail Mount

Description HeightBulkPackaging

AftermarketPackaging*

Rail Mount Flag Pole with Clamp 153/16" x 7/8" I.D — 14121-6*Blister Card

Flag Pole, Rail Mount• Stainless steel construction• With rings for attaching flag

14126

14125

Description SizeBulkPackaging

AftermarketPackaging*

Flag Pole 18" height — 14125-7

Flag Pole Base, stainless steel 21/4" diameter — 14126-6*Blister Pack

Flag Pole and Base18" heavy duty 316 stainless steel flag pole with rings for attaching flag.

14123

112

GENERAL MARINE ACCESSORIES

9013

Description Fits Battery Box(es)BulkPackaging

AftermarketPackaging*

Medium (38") strap kit 9065, 9065A, 9067, 9082, 9069 9013-1 9013-3

Medium strap only 9065, 9065A, 9067, 9082, 9069 9014-1 9014-3

Long (54") strap kit 9084 — 9013A3

Long strap only 9084 9014A1 9014A3

Mounting hardware only — 9006-1 —

*Skin Pack

Battery Box Hold-Down Straps and Mounting HardwareStraps are woven polypropylene with “firm-grip” buckles and are completely resistant to battery acid. Kit includes four #8, 3/4"screws and two footman clamps.

9082 9065

9067

Dimensions with Lid InstalledBattery BoxDescription

For BatterySeries

Inside Dimensions(L x W x H)

Outside Dimensions(L x W x H) Color/Style

BulkPackagingΔ

AftermarketPackaging

Small — 81/4" x 51/2" x 77/8" 11" x 71/2" x 83/4" Black, vented 9082-1 —

Standard 24/24M 111/8" x 73/4" x 101/8" 14" x 95/8" x 105/8" Black, vented 9065-1 —

24/24M Black, non-vented 9069-1 —

Power Guard 27 27/27F/27M 137/8" x 71/4" x 101/2" 167/8" x 95/8" x 107/8" Black, vented 9067-1 —

Large — 157/16" x 71/8" x 93/4" 183/4" x 91/4" x 101/4" Black, vented 9084-1 —

Power Box 27F Black 9076-1 —

ΔUPC Label

BATTERY BOXES

9084

All battery boxes meet ABYC standard E-10 and U.S. Coast Guard SpecificationNumber 183.420 as an OEM-installed battery hold-down system. Polypropyleneconstruction for total acid resistance. Hold-down straps resist 350 pounds of force,nearly four times the USCG requirement. Battery Boxes are drop tested intemperatures ranging from -20°F to +120°F. Mounting hardware is included.

Small Battery Box

For smaller batteries like Series 16 and those used in jet skis and power lawn and garden equipment. Vented black battery box.

Standard Battery Box

Vented and non-vented battery box for standard size, Series 24 batteries (101/8" maximum height). Note: 9069 cover is non-vented and is not for marine use.• 4 cable openings, enlarged to .55"-diameter• Larger handles with rolled edges• Instructions molded inside cover

Power Guard 27 Battery Box

Vented black battery box for Series 27 batteries. (101/2" maximum height).• 4 cable openings, enlarged to .55"-diameter• Larger handles with rolled edges• Instructions molded inside cover

Large Battery Box

Vented black battery box for larger applications (93/4" maximum battery height).

NEW! Power Box, F27 Series

• LED battery level indicator with one-touch 'test' button• Heavy duty non-corrosive black plastic box• Hold-down strap included• 12-Volt accessory adapter port with 10 amp fuse built-in• External terminals

9076

113

GENERAL MARINE ACCESSORIES

Description Inside Dimensions For Battery SeriesBulkPackaging

AftermarketPackaging*

24 Series 7" L x 11" W 24/24M — 9092-5

27 Series 123/8" L x 71/8" W 27/27M — 9093-5

*Poly Bag

Battery HolderA simple-to-install battery holder that fits into a limited space. For batteries up to 101/2" in height. Provides simple installationfor changing or replacing batteries. The polypropylene hold-down strap has a positive locking, quick disconnect buckle.Molded base mounts with four #10 panhead fasteners.

9091

DescriptionInside Dimensions(L x W x H) For Battery Series

BulkPackaging

AftermarketPackaging*

Small battery tray 105/8" x 63/4" x 81/4" 24/24M 9090-1 9090-5

Large battery tray 121/8" x 63/4" x 81/4" 27/27M 9091-1 9091-5

*Poly Bag

Battery TrayHeavy-duty, non-corrosive black plastic. Includes adjustable-height crossbar and two retaining bolts. Meets ABYC Standard E-10 and U.S. Coast Guard requirements. Patented design. Install with #10 fasteners.

14214

DescriptionBulkPackaging

AftermarketPackaging*

Negative and positive, set 14214-1 14215-3

*Skin Pack

Polarized/Wing Nut Battery TerminalsLead terminals with wing nuts and cadmium-plated bolts. Clamps are stamped with negative (-) or positive (+) sign.

14258

DescriptionBulkPackaging

AftermarketPackaging*

10-amp, maximum — 14258-3

*Skin Pack, pair

Battery ClipsQuick-connect battery clips for 12-volt electrical accessories. 10-amp rated, copper-plated construction with red and blackhandle grips. For use with wire up to 10-gauge.

9092

14230

DescriptionBulkPackaging

AftermarketPackaging*

51/2" dia. x 23/4" deep — 14230-3

*Skin Pack

4-Way Battery Selector SwitchSingle-pole, triple-throw switch permits four connection modes: Battery One, Battery Two, two batteries in parallel, or bothoff. Rated for 230-amps continuous, 345-amps momentary. For 6-Volt to 32-Volt D.C. systems. Includes alternator fieldcircuit disconnect to prevent surges. Selector has positive click positions. Bakelite housing with brass terminals, and brassnuts. Install with #10 screws.

114

GENERAL MARINE ACCESSORIES

14236

SizeBulkPackaging

AftermarketPackaging*

3-gang, 35/8" high — 14234-3

6-gang, 61/2" high — 14236-3

*Skin Pack

Toggle Switch Panels, With FusesFor installation of a fused marine electrical system. Sturdy, bakelite panel with metal on/off toggle switches. For 12-Volts D.C.only. Each switch rated at 5-amps. Fuse holders include 1/4" x 11/4", 5-amp fuses. Fuses are bridged to a single hot feedconnection. • 41/2" wide x 11/2" deep• Four holes for #8 fasteners• 3-gang panel includes labels for 6 functions• 6-gang panel includes labels for 12 functions

Caution: Do not use fuses rated over 5-amps.

14343

14346

Fuse Size Wire SizeBulkPackaging

AftermarketPackaging*

IN-LINE FUSE HOLDERS

10-amp 16-gauge — 14341-3

15-amp 14-gauge — 14342-3

20-amp 12-gauge — 14343-3

30-amp 10-gauge — 14344-3

50-amp 8-gauge — 14345-3

IN-LINE FUSE HOLDERS

10-amp 16-gauge — 14349-6

20-amp 14-gauge — 14353-6

30-amp 10-gauge — 14351-6

IN-LINE FUSE HOLDERS / ATO-ATC

10-amp 16-gauge — 14346-6

30-amp 12-gauge — 14347-6

*-3 = Skin Pack, -6 = Blister Card

In-Line Fuse HoldersIn-Line Fuse Holders

Convenient in-line, over-current protection. For 12-Volts D.C. only.Waterproof holders for 1/4" x 11/4" fuses. Case is heat-resistant for high amperage conditions. Push-together case is non-breakable, molded plastic with 8" wire loop. Includes one fuse.

In-Line Fuse Holders

Molded of heat resistant non-breakable plastic. "Push together" type is splash resistant. The fuse holder has spare fusecompartment. Supplied with two nickel plated brass fuses.

In-Line Fuse Holders / ATO-ATC

Water resistant. Easy to install, easy to change ATO-ATC fuse holder. Used in most recreational vehicles. Comes with capto protect fuse. Brass electrical contacts. Fuse included.

DescriptionBulkPackaging

AftermarketPackaging*

ATO/ATC Fuse holder — 14348-6

* Blister Card

ATO/ATC Fuse HolderWatertight, extra heavy duty and weatherproof. For use with fuses up to 30 Amps. 12 gauge wire leads for easy hook-ups.Fuse not included.

14349

14386

14234

115

GENERAL MARINE ACCESSORIES

7594

Push/Pull SwitchesThese switches have large easy-to-pull handles. They are commonly used for operating lights. 3/4"-diameter chrome-platedknob with brass case. Includes screw terminals for connection without a wire lug. For 12-Volts D.C. only. Not externalignition protected.

Two-position Switch, Off/On

For operating one set of lights or another accessory.

Three-position Switch, Off/On/On

For operating running lights and anchor lights separately.

Description DimensionsInstallationHole Size

DepthBehind Panel

Max. PanelThickness

BulkPackaging

AftermarketPackaging*

Two-position 31/8"L x 11/4"W 3/8"-dia. 11/2" 1" 7563-1 7563-7

Three-position 31/4"L x 11/2"W 3/8"-dia. 2" 1" 7594-1 7594-3

*-7= Skin Pack -3=Clam Pack

7589

Specifications

InstallationHole Size

OverallDimensions

DepthBehind Panel

Max. PanelThickness

1/2"-dia. 13/8"L x 3/4"W 11/2" 1/4"

*Dimension using backup nut; 3/16" without backup nut.

DescriptionBulkPackaging

AftermarketPackaging*

On/off switch — 7589-3

On/off/on switch — 14386-3

*Skin Pack

Toggle Switches—Plastic HandleBlack thermoplastic body with nylon mounting stem. Neoprene toggle seal. These toggle switches have silver contacts and1/4" spade terminals. Rated for 5-amp load and 15-amp inductive load. For 12-Volts D.C. only. Not external ignition protected.Includes a nickel-plated brass backup hex nut and thermoplastic knurled face nut.

On/Off Switches

For lights, bilge pump, or blowerrequiring a simple on/off switch.Single-pole,single-throw contact.

On/Off/On Switches

For bilge pump, speed selector, or lightthat requires two power settings.Single-pole, double-throw contacts.

14255

Specifications

InstallationHole Size

OverallDimensions

DepthBehind Panel

Max. PanelThickness

3/8"-dia. 11/8"L x 5/8"W 13/8" 1/4"

DescriptionBulkPackaging

AftermarketPackaging*

On/off switch — 14253-3

On/off/on switch — 14255-3

*Skin Pack

Toggle Switches—Metal HandleThese metal toggle switches have 1/4" spade terminals. Rated for 10-amps, 12-Volts D.C. only. Plastic body/housing withmetal toggle and ring. Not external ignition protected.

On/Off Switches

Single-pole, single-throw contact. Forlights, bilge pumps, or blowers.

On/Off/On Switches

For bilge pump, speed selector, or lightthat requires two power settings.Single-pole, double-throw contacts.

14386

14253

7563

116

GENERAL MARINE ACCESSORIES

7648

7647

Specifications

PlateDimensions

DepthBehind Panel

InstallationHole Size

29/16"W x 13/4"H 21/4" 11/8"-dia.

DescriptionWireSize

BulkPackaging

AftermarketPackaging*

Female receptacle, boat side 10-gauge — 7648-7

Male plug, motor side 10-gauge — 7647-7

*Clam Shell

Trolling Motor Connectors Heavy-Duty 3-Wire, 12/24-VoltsUse these molded rubber connectors for quick, convenient connections between an electric trolling motor and the powersource. 6"-long, 3-wire harnesses with butt connectors.

14350

14352

Specifications

PlateDimensions

DepthBehind Panel

InstallationHole Size

21/2"W x 13/4"H 23/4" 11/8"-dia.

DescriptionWireSize

BulkPackaging

AftermarketPackaging*

Female, boat side 10-gauge — 14350-3

Male, motor side 10-gauge — 14352-3

*Skin Pack

Trolling Motor Connectors Medium-Duty 2-Wire, 12-VoltsUse these molded rubber connectors for quick easy connections between an electric trolling motor and the power source. 5"-long harness with butt connectors. Receptacle (14350) includes weather cover and small face plate for flat surface mount.10-gauge wire. For 12-Volts D.C. only. Two holes for #8 fasteners.

Female Receptacle

Female receptacle has weather cover and small face plate for flat surface mount and two holes for #8 fasteners.Male Plug

Male plug has wing-tabs for easy installation and removal.

14267

DescriptionBulkPackaging

AftermarketPackaging*

ZAMAK socket and handle — 14267-3

*Skin Pack

Chart Light/Cigarette LighterConvenient chart light/cigarette lighter kit. The lighter element has an on/off switch for the chart light enclosed in the handle.20", 18-gauge wire harness with attached lug connectors and spade terminals. Three holes for #6 flathead fasteners. Blackplastic face plate with white lettering, 3" wide x 13/4" high. Requires 21/2" depth behind panel. 11/8" dia. installation hole size.For 12-Volts D.C. only.

117

GENERAL MARINE ACCESSORIES

7591D6

DescriptionBulkPackaging

AftermarketPackaging*

Kill switch keys and lanyard — 7591D6

*Blister Card

Boat Kill Switch Keys & Lanyard• Includes 7 keys to fit Johnson, Evinrude, Mercury, Yamaha, Suzuki, Tohatsu and Honda kill switches• Swivel snap hook prevents tangles• Rust resistant stainless steel crimps• Corrosion proof

14290

DescriptionBulkPackaging

AftermarketPackaging*

Electrical connector kit — 14290-6

*Blister Pack

Electrical Connector KitIncludes a multi-purpose cutter/crimp tool, and 30 assorted connectors. Three each for the listed gauges: 18-22 gauge–buttsplices, ring connectors, male and female spade connectors; 14-16 gauge–butt splices, ring connectors, male and femalespade connectors; 10-12 gauge–butt splices and ring connectors.

12680

Description HeightBaseDimensions

LockingBar Length

BulkPackaging

AftermarketPackaging*

Nylon 41/4" 31/2"W x 21/2"D 37/8" — 12680-3

*Skin Pack

Antenna BaseMarine-quality, corrosion-resistant materials. For whip antennas up to 8 feet long. 1"-14 threads (1-14UNS2A standard) toaccept antennas with 1"-diameter screw mount–VHF Marine, CB, and Loran-C. Ratchet mechanism with locking bar allowfold-down plus 210° fore-to-aft and 210° side-to-side adjustments. Install with four 1/4" fasteners.

11872D6

DescriptionBulkPackaging

AftermarketPackaging*

Dual outlet — 11872D6

*Blister Card

Dual Outlet• Converts any 12V cigarette lighter or power socket into a dual power outlet• LED indicator light• 12 Volt, 8 amp, fuse included

118

GENERAL MARINE ACCESSORIES

Class CategoryGVWRMaximum

TongueWeight

BallDiameter

I Light-duty 2,000 lbs. 200 lb. 17/8"

II Regular-duty 3,500 lbs. 350 lb. 2"Note: GVWR=Gross Vehicle Weight Rating (weight of the trailer plus boat and contents)

GTW Ball Shank Shank Bulk AftermarketDescription Capacity Diameter Diameter Length Packaging Packaging*

Class I 2,000 lbs. 17/8" 3/4" 19/16" 11081-1 11081-7

Class II 3,500 lbs. 2" 3/4" 19/16" 11083-1 11083-7

*Clam Shell

Hitch Ball - Chrome-Plated SteelHigh-quality hitch balls for Class I and II loads. Chrome-plated solid steel with extra-long, 2"-high collar. Includes lock washer and nut.

Description SpecificationsBulkPackaging

AftermarketPackaging*

Class I 47" L x 7/32" dia. — 11009-5

Class II 51" L x 1/4" dia. — 11010-5

*Poly Bag

Trailer Safety ChainConnects the trailer tongue to the trailer hitch on the towing vehicle for security and safety. Meets SAE specifications. Weldedsolid steel with bright zinc-plated finish and S-hooks at both ends. Two chains required per trailer.

11081

11009

Back View

DescriptionBulkPackaging

AftermarketPackaging*

7-to-5 way connector — 14134-7

7-to-4 way connector 14135-7 14135-7

*Clam Shell

Trailer AdaptersConnects auxiliary, tail lights and ground left right and stop.

14017

14020

DescriptionBulkPackaging

AftermarketPackaging*

18" plug and 48" socket — 7663-5

48" socket — 14017-3

12" plug — 14020-3

*-5= Poly Bag, pair, (7663) or -3=Skin Pack

Trailer Wiring Harness/Connectors - 4-way FlatThe most popular 4-way flat wiring harness kit for vehicles and trailers. Copper-stranded, color-coded wire and plasticmolded terminals with four-prong trailer plug or vehicle socket. Both ends have 18" plug wire and 48" socket wire.

14134

TRAILER PARTS AND ACCESSORIES

119

GENERAL MARINE ACCESSORIES

14133

DescriptionBulkPackaging

AftermarketPackaging*

Circuit Tester — 14132-6

Circuit Tester, Inline — 14133-6

*Blister Card

Trailer Light Circuit Testers

Tester plugs into tow vehicle and LED illuminates to show if connectors are correct and working.Check turn signals, tail and brake lights.

12044

DimensionsShank Length Diameter

Bulk Packaging

AftermarketPackaging*

5/8" 1/4" — 12044-3

*Skin Pack

Coupler Security Lock - One PieceFor maintenance-free trailer security. While this lock is in place, coupler cannot be used. Solid brass with rustproof stainlesssteel shackle pin. Includes two keys.

12041

ConstructionBulkPackaging

AftermarketPackaging*

Die-cast ZAMAK — 12041-3

*Skin Pack

Coupler Security Lock - Two PieceFor trailer security and safety. Die-cast ZAMAK with brass finish, 2-piece lock through-coupler release handle. Includestwo keys.

11028Description

Bulk Packaging

AftermarketPackaging*

Solid zinc-plated steel 11028-1 11029-7

*Clam Shell

Coupler Locking PinQuick connect and disconnect, to keep coupler from accidentally disengaging. Fits 2" and 3" couplers. Pin fits throughcoupler release handle to provide security and safety. 21/4" wide x 1-5-8" long.

14132

120

GENERAL MARINE ACCESSORIES

HandleDimension Span

WheelDiameter

Bulk Packaging

AftermarketPackaging*

45" long 201/2" 61/2" — 11160-4

*Individual Carton

Trailer DollyMakes trailer maneuvering easy. Dual tire, wide-span wheels lighten the trailer load. 17/8" coupler ball for 200-pound tongueweight capacity. Tubular steel dolly has black EDC-coating. Heavy-duty molded ABS wheels with molded tires. Handle gripsare molded plastic; handle breaks down for storage and shipping. Assembly required.

Travel

Description Lift LiftBulk Packaging

AftermarketPackaging*

1000 lbs. capacity 10" 24" — 11127-4

*Individual Carton

Swivel Screw Jack - Swing-upFits 3" x 5" trailer tongue. Swings from vertical position to horizontal for a fast getaway. Spring loaded latch locks andreleases the jack from one position to the other. Corrosion resistant steel tubing. 10" lift travel, maximum lift 24". Rated at 1000 lbs. tongue weight capacity. Swing-up jack has a convenient side wind handle and a tough 6" diameterpolypropylene wheel.

11149

Description TypeGearRatio

Bulk Packaging

AftermarketPackaging*

2000 lb. with 2" W x 20' L nylon strap Dual 4.1:1 — 11195-4

1200 lb. with 2" W x 20' L nylon strap Single 4.1:1 — 11149-4

*Individual Carton

WINCHES AND ACCESSORIESMany factors affect the capacity of a winch in pulling a boat. As a rule of thumb, winches may be used to trailer boats upto two times the winch capacity. For example, a 1200-lb. capacity winch may be used to load boats up to 2,400-lbs.Caution: Attwood winches are not intended for use as hoists; for lifting, supporting or transporting people; or for

lifting loads over people.

Dual drive enhances the pulling capacity by distributing the load equally to two sets of gears. Eliminates frame torque. 2,000-lb. load capacity with 4.1:1 gear ratio. Three-position pawl provides forward, neutral and reverse operations. Black EDC finish.Molded, textured roller grip. Includes 20' nylon web strap with zinc-plated snap hook.

Solid gear construction with precise gear tooth engagement. 1,200-lb. load capacity with 4.1:1 gear ratio. Three-position pawlprovides forward, neutral and reverse operations. Black EDC finish. Molded, textured roller grip. Includes 20' nylon web strapwith zinc-plated snap hook.

Dual Drive Winch—2,000 pound

Single Drive Winch—1,200 pound

See tie downs on page 132 for replacement winch straps, cable and rope.

11195

11127

11160

121

GENERAL MARINE ACCESSORIES

Rubber Rollers Polymer Rollers TP Rollers

Non-marring prime rubber compoundEconomically pricedOriginal equipment replacements for most trailers

Will not mark or discolor your boatResist cuts and abrasionsHave superior durability, to outlast ordinary rollers

Softer, more flexibleSuperior UV and chemical resistanceWill not mark or discolor your boat

DimensionsOpening Size

HoleDiameter

BulkPackaging*

Aftermarket Packaging

23/4" H x 27/8" W x 31/2" D 3" 1/2" 11305-1 —

*UPC Label

Bow Stop - PolymerNon-marring, resilient bow protection. Smooth finish allows easy centering. Polymer bow stops are rugged and dependable.Impervious to sunlight, chemicals, and fuels.

DimensionsHole I.D.

BulkPackaging*

Aftermarket Packaging

2" x 2" 3/8" 11200-1 —

3" x 3" 1/2" 11201-1 —

4" x 4" 1/2" 11202-1 —

*UPC Label

Y Stops - RubberMolded rubber stops. Each is pre-drilled with 3/8" or 1/2" diameter hole.

11305

11201

11310

DimensionsHole I.D.

BulkPackaging*

Aftermarket Packaging

3" O.D. x 3"L 1/2" 11310-1 —

*UPC Label

Bow Roller - PolymerNon-marring, resilient bow protection. Smooth finish helps boat roll easily into place. Polymer bow rollers are rugged anddependable. Impervious to sunlight, chemicals, and fuels. 3" O.D. x 3" length.

Description DimensionsHole I.D.

BulkPackaging*

Aftermarket Packaging

Bow Roller 3" O.D. x 3" L 1/2" 11881-1 —

Bow Roller 4" O.D. x 4" L 1/2" 11880-1 —

Bow Roller w/ Bells 31/2" O.D. x 4" L 1/2" 11857-1 —

*UPC Label

Bow Rollers - TPNon-marring, resilient bow protection. Smooth finish helps boat roll easily into place. Impervious to sunlight, chemicals,and fuels.

BOW STOPS & ROLLERSRoad Ready bow stops, rollers, and roller brackets provide protective support for your boat’s hull while it’s on the trailer, andallow easier launching, centering, and retrieval of the boat. This assortment includes rollers, bow stops, and steel rollerbrackets. Rollers and bow stops are available in polymer or rubber.

11881

11857

11200

11202

122

GENERAL MARINE ACCESSORIES

Bow Rollers - RubberDurable protective molded rubber bow rollers.

11215

Keel Rollers - Heavy-Duty RubberThese durable, protective rollers are for heavy-duty use. Molded rubber over a steel tube with nylon end inserts. The gradualinward taper and “V” cut eases loading and launching of heavier boats. Plastic inserts are included to protect from mountinghardware damage.

11210

Spool/Keel Rollers - Light-Duty RubberDurable and protective. Molded rubber with nylon inserts. 3" outside diameter.

Groove Rib Roller - TPNon-marking, durable and protective. For use with automatic adjusting roller systems. Nylon insert.

Adjusting Rollers - RubberFor use with automatic adjusting roller systems. Molded rubber. Smooth surface has steel insert; ribbed surface hasnylon insert.

DescriptionOutsideDiameter

BulkPackaging

AftermarketPackaging*

Spool/Keel 4" 11315-1 —

5" 11317-1 —

Keel 8" 11319-1 —

*UPC Label

Spool/Keel Rollers—PolymerNon-marring, resilient keel protection. Polymer spool/keel rollers are rugged and dependable. Smooth tapered shape holdskeel in place; makes launching and recovery easy. Impervious to sunlight, chemicals, and fuels. Hole diameter: 5/8".

11315

11319

11230

DescriptionShaftDiameter

BulkPackaging*

Aftermarket Packaging

8" length 5/8" 11215-1 —

10" length 5/8" 11216-1 —

12" length 5/8" 11217-1 —

*UPC Label

DescriptionShaftDiameter

BulkPackaging*

Aftermarket Packaging

4" length 5/8" 11210-1 —

5" length 5/8" 11211-1 —

*UPC Label

Description DimensionsShaftDiameter

BulkPackaging*

Aftermarket Packaging

Ribbed 5" dia. x 3" W 11/8" 11882-1 —

*UPC Label

Description DimensionsShaftDiameter

BulkPackaging*

Aftermarket Packaging

Smooth 41/4" L x 43/8" dia. 3/4" 11230-1 —

Ribbed 3" L x 41/4" dia. 3/4" 11232-1 —

*UPC Label

DescriptionOutsideDiameter

ShaftDiameter

BulkPackaging*

Aftermarket Packaging

3" length 3" 1/2" 11205-1 11206-5

4" length 31/2" 1/2" 11209-1 11209-5

*Display Hanger

11882

11232

11205

123

GENERAL MARINE ACCESSORIES

Dimensions WidthWidthBetween Holes

SlotsSize

BetweenSlots

BulkPackaging*

AftermarketPackaging

41/4" 21/2" 23/8" 11252-1 —

81/4" 3" 51/2" 11254-1 —

*UPC Label

11363

Length WidthBulkPackaging*

AftermarketPackaging

08" 2" 11363-1 —

10" 2" 11364-1 —

*UPC Label

Bunk BracketsFor mounting bunks. Slotted for vertical adjustments. Mounts with 1/2" (1.27 cm) bolt. 11 gauge galvanized steel.

11260

Roller Offset Panel BracketsOffset panel brackets with 7" slot for adjustment. Zinc-plated. For roller mount.

Size AssembledBulkPackaging*

AftermarketPackaging

08" 9" 11360-1 —

10" 11" 11361-1 —

12" 13" 11362-1 —

*UPC Label

Swivel Bolster BracketsHeavy 11 gauge galvanized steel that is slotted for vertical adjustment. Non slip dimples for secure hold. 3.5" wide anglebracket pivots for angled or flat mounting of 2" x 6" bunk or bolster boards. Complete with nut and bolt for angle bracket.Mounts with 1/2" bolt.

11220

Description Included PartsBulkPackaging

AftermarketPackaging*

Spool/keel 11210 rollerand 11252 bracket

— 11220-3

11211 rollerand 11253 bracket

— 11221-3

*Skin Pack

Roller Panel Spool/Keel Bracket Roller AssembliesComplete spool/keel bracket and roller assembly. Mounts to trailer cross roller assemblies. Formed, zinc-plated steel panelbracket with 1/2"-wide slot for adjustment.

11360

11252

Cross-member panel brackets are available for a variety of roller sizes. Long mounting slot allows adjustment. Brackets arepre-drilled with 5/8"-diameter holes for roller mount. Zinc-plated or galvanized steel.

Roller Panel Brackets

Description LengthHoleDiameter

BulkPackaging*

AftermarketPackaging

Zinc-plated steel 8" 5/8" 11260-1 —

*UPC Label

124

GENERAL MARINE ACCESSORIES

11370

Keel Mounting BracketOne piece roller bracket with 5" slot for vertical adjustment. Mounts with 1/2" bolt and is designed to be used with a5/8" roller shaft.

11282

Description LengthRollerSize

BulkPackaging*

AftermarketPackaging

5/8"dia. 63/8" 51/4" — 11282-3

91/4" 8" — 11283-3

111/4" 10" — 11284-3

131/2" 12" — 11285-3

*Skin Pack

Roller Shaft SetsRoller shafts and matching pal nuts secure shaft in place on roller. Shaft and nuts are solid zinc-plated steel.

11368

Pal Nuts5/8" zinc plated pal nuts to be used with 5/8" roller shafts.

11434

Inside Width ThreadsInsideHeight

BulkPackaging*

AftermarketPackaging

21/8" 1" 4" — 11433-3

31/8" 2" 3" — 11434-3

4" — 11435-3

41/8" 2" 3" — 11436-3

*Skin Pack

Roller Bracket U-Bolt SetsSquare bend-style U-bolts for roller brackets. Solid, zinc-plated steel with lock washers and nuts. All bolts are 7/16" diameterstock.

11246

DescriptionBulkPackaging*

AftermarketPackaging

8" wide — 11246-1

12" wide — 11247-1

*Shrink Wrap

Bunk Padding12'-long roll of durable, weather-resistant polypropylene marine carpet material. Easy to cut and custom fit. Protects hull;eases loading and launching. Charcoal color; acrylic backing grips surface of trailer bunk boards or cradle. No excessive fuzz,static-free. Made for minimal water retention.

DescriptionBulkPackaging*

AftermarketPackaging*

Set of 8 — 11368-3

*Blister Card

Size Slot CenterBulkPackaging*

AftermarketPackaging

05" 23/4" 11370-1 —

10" 83/16" 11371-1 —

12" 101/8" 11372-1 —

*UPC Label

125

GENERAL MARINE ACCESSORIES

11430

DescriptionBulkPackaging*

AftermarketPackaging

Car-top boat/canoe kit — 11430-4

*Individual Carton

Car-Top Boat/Canoe Carrier KitA simple, convenient kit for carrying a canoe or small boat on car top. Includes four supporting foam blocks that snap onboat’s gunwale and help prevent scratches on car top. Two straps with adjusting buckles and clips. Includes 20' ofpolypropylene rope and S-hooks to secure bow and stern to bumpers. Straps are sturdy poly web with vinyl-coated clips.

DescriptionBulkPackaging*

AftermarketPackaging

Zinc-plated steel — 11090-3

*Skin Pack

U-Bolt Style Tire CarrierSquare bend U-bolt with bracket mounts tire on tongue or trailer frame. The frame must be between 2" x 2" square to 31/2" x4" rectangular in size. Fits 4- or 5-lug hole rims. Extra-long 81/2" shaft fits 8" to 15" tires. Padlock not included. See page 119 for padlocks.

11090

10569_SV

I.D. Length ColorAftermarketPackaging*

2" 36" Black 105693BK

2.5" 36" Black 105694BK

Forest Green 105694FG

Navy 105694NV

Red 105694RD

Royal 105694RB

Silver 105694SV

48" Black 105695BK

Forest Green 105695FG

Navy 105695NV

Red 105695RD

Royal 105695RB

Silver 105695SV

60" Black 105696BK

Forest Green 105696FG

Navy 105696NV

Red 105696RD

Royal 105696RB

Silver 105696SV

*Poly bag, pair

Boat Trailer Guide Protectors

Boat Trailer Guide Protectors simply slide over existing trailer guide posts to help protect boat fromscratches and impact. These protectors not only protect your boat but enhance the looks too.Made of closed cell polyurethane foam with nylon cloth covers. Sold in pairs.

126

GENERAL MARINE ACCESSORIES

Description Fits Outer Hub I.D.BulkPackaging*

AftermarketPackaging

HubMate™ set 1.781" — 11107-7

1.980" — 11108-7

*Clam Shell (sets) or Skin Pack, pair

“HubMate™” Wheel Bearing Protectors and CoversBearing protectors replace dust cap in the wheel hub. The accessible grease fitting allows you to add grease withoutdisassembling. Positive grease pressure keeps water and dirt out. Automatically lubricates, reducing wear and prolongingbearing life. Covers are custom-fitted PVC.

11054

Outer Bearing O.D. Outer Hub I.D. Outer Bearing Inner Bearing Bulk AftermarketDescription A B Cone Cup Cone Cup Packaging Packaging*

Straight 1" 1.98 L44643 L44610 same same — 11054-3

1" w/dust cap 1.98 L44643 L44610 same same — 11053-3

11/16" 1.98 L44649 L44610 same same — 11057-3

*Skin Pack

Wheel Bearing KitsWheel bearing kits contain one grease seal, one cotter pin, two cones, and two cups. Sized according to outsidespindle diameter .

11108

127

GENERAL MARINE ACCESSORIES

Protect your boat and engine withSwivl-Eze Transom Savers:

The Swivl-Eze Difference

Pro-Adjustable Headw/ ReplaceableRubber Pads

RollerBracket

Bolt-OnBracket

Swivl-Eze has your Back End CoveredA lifted outboard puts hundreds of foot-pounds ofpressure on the transom — especially during trailering

• Support the contilevered weight of the motor• Stabilize engine and steering mechanism

when trailering

• Tough components — You'll get long life from ouradjustable toggles with replaceable rubber pads

• Innovation — Shock-Eze, our spring-loadedtransom saver, is designed to reduce damagingeffects of road shock. Works great for motors withhydraulic trim/tilt

400-B 4000-ADJ

SP-421-RB

426-R

Adjustable Length Models

Description Head TypeMountingBracket

BulkPackaging

AftermarketPackaging

23"-35", Black Coated Tube Deluxe Roller 400-R SP-400-R

23"-35", Black Coated Tube Deluxe Bolt 400-B SP-400-B

23"-35", Black Coated Tube Deluxe Roller/Bolt — SP-400-RB

24"-36", Clear Anodized Tube Pro Adjustable Roller 4000-ADJ SP-4000-ADJ

24"-36", Clear Anodized Tube Pro Adjustable Bolt 4000-ADJ-B SP-4000-ADJ-B

24"-36", Clear Anodized Tube Pro Adjustable Roller/Bolt — SP-4000-ADJ-RB

28"-40", Clear Anodized Tube Pro Adjustable Roller 422-ADJ SP-422-ADJ

32"-44", Clear Anodized Tube Pro Adjustable Roller 424-ADJ SP-424-ADJ

44"-56", Clear Anodized Tube Pro Adjustable Roller 436-ADJ —

*Clam ShellSHOCK-EZE Models-Adjustable Length with Shock Absorbing Spring

Description Head TypeMountingBracket

BulkPackaging

AftermarketPackaging*

27"-36", Black Powder Coated Tube Pro Adjustable Roller/Bolt — SP-421-RB

31"-40", Black Powder Coated Tube Pro Adjustable Roller/Bolt — SP-429-RB

*Clam ShellFixed Length Models

Description Head TypeMountingBracket

BulkPackaging

AftermarketPackaging*

28", Clear Anodized Tube Deluxe Roller — SP-426-R

28", Clear Anodized Tube Deluxe Bolt — SP-426-B

36", Clear Anodized Tube Deluxe Roller — SP-434-R

36", Clear Anodized Tube Deluxe Bolt — SP-434-B

*Clam ShellReplacement Parts

DescriptionAftermarketPackaging

Small Bolt on Bracket for Adjustable Transom Saver SP-402

Large Bolt for Bracket SP-405

Rubber Tie-Down Straps SP-406

Pro Adjustable Head SP-408

Replacement Rubber Shocks for Pro-Adjustable Head SP-410**

Replacement Toggle for Pro-Adjustable Head SP-416**

Replacement Toggle for 400 Series Models SP-429**

*Polybag **Clam Shell

TRANSOM SAVERS

Deluxe Headw/Composite Heads

400-R

128

GENERAL MARINE ACCESSORIES

Heavy-Duty MoldedRubber Pads

AdjustableCenter Angle

DescriptionAftermarketPackaging*

MD Angled Adjustable Reach Transom Saver 460-ADJ

Individual Carton*

MD Angled Adjustable Reach Transom Saver• Adjusts from 30"- 60"• Unique angle adjustment (patent pending) from 0 degrees to 36 degrees with 12 degree increments• Locking feature prevents unintentional detachment• Our innovative design will fit most trailers• Heavy-duty molded rubber pads prevent scratching on the lower unit• Steel construction with corrosion resistant black finish on the tubes

DescriptionAftermarketPackaging*

Fits: OMC, Bombardier 1989 to present, 100HP and up 10309

Fits: Mercury engines 200 OpitMax, 255 OptiMax,225HP EFI, 250HP EFI

10107

Fits: Mercury engines 135 OptiMax, 150 OptiMax175 OptiMax, 75HP-200HP EFI

10108

Replacement Bushings, Pair SP10106**

*Individual Carton ** Polybag

Lock N' Stow™• Locks the outboard motor in the forward position while trailering, greatly reducing the damaging effects of road shock• Does not "tie" engine's lower-unit to trailer, eliminating excessive pressure on hydraulic seals and unsightly scuff marks• Small compact mount can be easily stored in just about any boat compartment• Constructed of black powder-coated steel with stainless steel pins

Bracket withLocking Feature

460-ADJ

Patent Pending

129

GENERAL MARINE ACCESSORIES

TRANSOM STRAPS

When properly secured to transom eyes and trailer, transom straps reduces verticaland lateral movement to safely secure the boat to the trailer. They also reducebouncing of the boat on the trailer pads or rollers. Available in 2" width for largertrailerable boats and 1" width for lighter boats.

Quick-release bucklewith Hook-N-Loop closure

15230

Bulk AftermarketDescription Length Packaging Packaging*

2" Wide, sold in pairs 2 ft. 15230-1 15230-7

3 ft. 15231-1 15231-7

4 ft. 15232-1 15232-7

5 ft. 15233-1 15233-7

6 ft. 15234-1 15234-7

*Clam Shell, pair

2"-Wide Quick-Release Transom StrapsWebbing: Strong 2"-wide webbing. Resists rot, oils, gasoline, and most chemicals.Buckle: Quick-Release (Over-Center) buckle. Strong and secure, yet easy to use. Quick-tightening. Cinch tight and secure by depressing buckle handle. Release by lifting thebuckle handle.Hook: Vinyl-Coated S-Hook to prevent scratching boat or trailer finish. Corrosion-resistant. Heavy gauge.Special Features: Protective pad behind buckle to prevent marring and scratches on gelcoat and painted surfaces. Hook-N-Loop closure secures the buckle handle in thelocked position.

Quick-release bucklewith Hook-N-Loop closure

15237

Bulk AftermarketDescription Length Packaging Packaging*

1" Wide, sold in pairs 2 ft. 15237-1 15237-7

3 ft. 15238-1 15238-7

4 ft. 15239-1 15239-7

*Clam Shell, pair

1"-Wide Quick-Release Transom Straps

Webbing: 1"-wide webbing. Tough web fiber is strong and has excellent elasticity toabsorb sudden shock loads. Resistant to abrasion, rot, oils, gasoline, grease, and manyother chemicals.Buckle: Quick-Release (Over-Center) buckle. Easy to use, yet secure and strong.Simple, easy operation. Zinc-alloy plated finish.Hook: Vinyl-Coated S-Hook to prevent scratching boat or trailer finish. Corrosion-resistant. Heavy gauge.Special Features: Protective pad behind buckle to prevent marring and scratches on gelcoat and painted surfaces. Hook-N-Loop closure secures the buckle handle in thelocked position.

130

GENERAL MARINE ACCESSORIES

GUNWALE STRAPSGunwale straps secure the entire aft section of the boat over the gunwale to thetrailer and restrict vertical movement while on the road.

For ratchet straps used in gunwale applications, see General Purpose Utility Strapsection page 131.

Description LengthBulkPackaging

AftermarketPackaging*

2" Wide 10 ft. 15220-1 15220-7

13 ft. 15221-1 15221-7

16 ft. 15222-1 15222-7

20 ft. 15223-1 15223-7

*Clam Shell

2"-Wide Quick-Release Gunwale StrapsWebbing: Strong 2"-wide webbing. Resists rot, oils, gasoline, and most chemicals.Buckle: Quick-Release (Over-Center) buckle. Easy to use, yet secure and safe. Quick tightening –remove slack by pulling onthe loose strap end. Cinch tight and secure by depressing buckle handle. Release by lifting the buckle handle.

Hooks: J-Hook with snap-closure for secure, easy attachment. Electrostatic Discharge Coating (EDC) finish to preventcorrosion. Heavy gauge.

15220

BOW STRAPSBow straps secure the bow of the boat to the forward trailer member or tongue,and restricts vertical and backward movement of the boat on the rollers or pads.Reduces load on winch and winch strap. Use bow straps with transom or gunwalestraps to provide a complete, secure tie-down system.

Description LengthBulkPackaging

AftermarketPackaging*

1" Wide 3 ft. 15240-1 15240-7

*Clam Shell

1"-Wide Cam Bow StrapWebbing: 1"-wide webbing. Web fiber is strong and has excellent elasticity to absorbsudden shock loads. Resistant to abrasion, rot, oils, gasoline, grease, and many otherchemicals.Buckle: 1"-wide cam buckle with push-button release. Quick and easy to use. Spring-loaded lock secures the web strap. Zinc-alloy plated finish. Sewn web end preventsthe strap from pulling out of the buckle.Hook: Contains one vinyl-coated S-Hook for attachment to bow eye. Vinyl coatingprevents scratching boat or trailer finish. Corrosion-resistant. Heavy gauge.Special Features: Strap end contains a sewn-loop to create an adjustable, slip harnessfor attachment to trailer tongue or frame.

15240

131

GENERAL MARINE ACCESSORIES

3-Point Tie-Down Strap3-Point Tie-Downs secure the transom of personal watercraft to the trailer with one strap.The strap contains three S-hooks; the two, sewn end hooks attach to trailer and thesingle, “free-floating” hook attaches quickly and easily to the stern of the PWC.

Webbing: 1"-wide webbing. Web fiber is strong and has excellent elasticity to absorbsudden shock loads. Resistant to abrasion, rot, oils, gasoline, grease, and many otherchemicals.Buckle: 1"-wide cam buckle with push-button release. Quick and easy to use. Spring-loaded lock secures the web strap. Zinc-alloy plated finish. Sewn web end prevents the strap frompulling out of the buckle.Hook: Contains three, vinyl-coated S-Hooks to protect the finish of the boat and trailer. Floating S-Hook allows for easy installation.

GENERAL PURPOSE UTILITY STRAPSGeneral purpose straps are designed for a variety of applications. Use to secure cargo, motorcycles,bicycles, boats and other loads. Available in a variety of lengths and styles.

15200

Description LengthBulkPackaging

Aftermarket Packaging*

1" Wide ratchet 18 ft. 15201-1 15201-7

*Clam Shell

1"-Wide Ratchet Tie-Down StrapsWebbing: Strong 1"-wide webbing. Excellent elasticity to absorb sudden shock loads. Resistant toabrasion, rot, oils, gasoline, grease, and many other chemicals.Buckle: Easy-to-operate ratchet handle cinches and locks the web strap. Quick release; resistsjamming from side loads. Zinc-alloy plated finish. Sewn web end prevents the strap from pulling outof the buckle.Hook: J-Hook with snap-closure for secure, easy attachment. Electrostatic Discharge Coating (EDC)to prevent corrosion. Heavy gauge.

Ratchet Handle

Description LengthBulkPackaging

AftermarketPackaging*

1" Wide 94 inches 15241-1 15241-7

*Clam Shell

10892

10890

Tie-Down Anchor PointsHeavy-Duty: 7/16"-diameter stock. Contains two eye bolts, two lock washers, and two nuts. Zinc-platedsteel construction. 11/4" long with 5/8"-diameter eye.Regular-Duty: 3/8"-diameter stock. Contains two eye bolts, four washers, and four nuts. Zinc-platedsteel construction. 2" long with 1"-diameter eye.

Bulk AftermarketDescription Length Packaging Packaging*

Rubber tie-down strap 15" long 10928-1 10929-3

21" long 10930-1 —

*Skin Pack, set of 4

Rubber Tie-Down StrapsFor a variety of tie-down applications. Black EPDM rubber straps with zinc-plated steel S-hooks onboth ends. Lengths shown are relaxed and measured including hooks.

Description LengthBulkPackaging

AftermarketPackaging*

Heavy-duty 11/4" long — 10892-3

Regular-duty 2" long — 10890-3

*Skin Pack, pair

10928

10930

132

GENERAL MARINE ACCESSORIES

WINCH STRAPS, CABLES AND ROPESWinch straps, cables, and ropes are available to fit most winches, loads, and applications. A complete selection of winchproducts to meet every customer need and a variety of price points.Selecting a winch strap, rope or cable: NMMA, SAE, and BIA Standards require the minimum breaking strength of winchcable, rope, strap and hook be at least 1.5 times the rated straightline pull of the winch. For example, if a winch rope has abreaking strength of 1,500 lbs., it can only be used on winches rated up to 1,000 lbs. All Attwood winch cables, ropes andstraps are rated for the winch on which they can be installed. Winch ropes, strap, and cable should have a minimum of four(4) complete wraps around the winch drum in the most extended position for launching or retrieving the boat.

11141

Description LengthBulkPackaging

AftermarketPackaging*

Cut-end 15 ft. 11136-1 11136-7

20 ft. 11137-1 11137-7

25 ft. 11138-1 11138-7

Sewn-loop end 15 ft. 11141-1 11141-7

20 ft. 11147-1 11147-7

25 ft. 11153-1 11153-7

*Clam Shell

Winch StrapsYou can depend on Attwood winch straps. They’re easy to install, and prevent tangling onwinch drum. Built to be strong and durable. UV-resistant webbing with a special, heavy-duty, forged steel, snap-hook. The extra-long throat is designed for easier attachment tobow eyes on boats. Two “End-Strap” styles are available for easy, secure attachment tothe winch drum. Rated for winches up to 2,000 lbs.Webbing: The 2"-wide polyester webbing is one of the finest web strap materialsavailable. Polyester does not stretch and offers excellent resistance to ultravioletdegradation from sunlight.Strap End-Styles: Two styles available (1) Cut-End, and (2) Sewn-Loop End.Hook: Heavy-duty forged, zinc-plated steel snap hook. Spring-loaded closure for secureattachment. Extra-long throat for easy attachment.

11003

DescriptionBulkPackaging

AftermarketPackaging*

25 ft. long — 11003-5

*Poly Bag

Winch Cable—Heavy-Duty3/16"-diameter galvanized 7 x 9 aircraft cable fitted with 41/2"-long extra heavy-duty marine snap hook. Thimble preventsabrasion at the hook loop. Cable keeper included to secure cable to winch drum. For winches rated up to 2,600 lbs. Note:NMMA specifies a winch drum-to-cable diameter of eight (8) minimum.

11026

DescriptionBulkPackaging

AftermarketPackaging*

25 ft. long — 11026-5

*Poly Bag

Winch RopeDurable winch ropes are 3/8"-diameter nylon. Forged, zinc-plated steel hook. Strong, lightweight nylon absorbs shock andresists abrasion, mildew, and damage from most chemicals. For winches rated up to 1,200 lbs.

11136