FANUC ROBONANO α-0iB -English- a-0iB(… · 8 9 During setup, you can turn the revolving door to...
Transcript of FANUC ROBONANO α-0iB -English- a-0iB(… · 8 9 During setup, you can turn the revolving door to...
-
Main specifications
Work-table area
Run out
Mass of the machine
Stroke
Command resolution
Bearing type
Maximum feedrate
Straightness
Standard accessories
X axis (horizontal linear)
Z axis (horizontal linear)
Y axis (vertical linear)
B axis (horizontal rotation)
C axis (vertical rotation)
Hydrostatic air bearing (all axes)
X, Z, and Y axes
B and C axes
B and C axes
X and Z axes
Y axis
B axis
C axis
X axis
Z axis
Y axis
B and C axes
Approx. 1700 kg
Supplying cutting fluid unitTool holderCounter weightAngle platePrecision compressed air temperature control systemSpeed display
280mm
150mm
40mm
360(continuous rotation)
1nm
0.000001
210mm
500mm/min
50mm/min
3600/min
3600/min
250min-1 (S axis mode)
0.2m/280mm
0.2m/150mm
0.2m/40mm
0.05m
X
Y
Z
C
B
280mm
150mm
40mm
All specifications are subject to change without notice. No part of this catalog maybe reproduced in any form. The photo includes options. The products in this catalog are controlled based on Japan's "Foreign Exchange and Foreign Trade Law". The export of ROBONANO -0+B from Japan is subject to an export License by the government of Japan. Other models in this catalog may also be subject to export controls.Further, re-export to another country may be subject to the license of the government of the country from where the product is re-exported. Furthermore, the product may also be controlled by re-export regulations of the United States government.Should you wish to export or re-export these products, please contact FANUC for advice.
HeadquartersOshino-mura,Yamanashi 401-0597, JapanPhone:81-555-84-5555 Fax:81-555-84-5512http://www.fanuc.co.jp
For particulars apply to the ROBONANO sales Dept. at Oshino-mura, Yamanashi 401-0597, Phone:81-555-84-5371 Fax:81-555-84-5545
< CORPORATION, 2001
< CORPORATION
RNANO -0+B(E)-10, 2014. 10, Printed in Japan
High-reliability and High-performanceUltra Precision nano machine