www.quatek.com.hk

Sheet ResistanceThin-Film MetrologyESD Entranceguard System

Measurement Range: 103 ~ 1013ΩAccuracy: 103 ~ 1012Ω: ±5%/1013Ω: ±8%Four kind of test probe - 152P-CR-1 concentric ring probe, Meet IEC or ESDA standard, measure surface resistance and bulk resistance - 152BP-5P point-to-point probe, meet ANSI/ ESD-STM4.1 standard, measure surface resistance - 152P-2P Two-point resistance probe - Small probe, Can be arbitrary placement and measuring objects of the body resistance value

Surface Resistance MeterTrek 152-1

156A: 3 1/2 LED display157: LCD display158A: Color LCD graphics displayAccuracy: ±1VMeasure mode: - ±decay time ±1000 ~ ±100V (can set up the stop voltage) - ±ion balance - Have two kind of test plate which can meet the different applicationCan store the test data up to 1000 ~ 1500(157/158A)

Charge Plate Monitor(CPM)Trek 156A/157/158A

Measurement Range: 0 ~ ±2kV DC(520 and 876)0 ~ ±20kV DC(523 and 884)Measure the surface voltage with non-contact probeAccuracy: 5%(Full scale)Measure Distance: 5 ~ 25mmMeasure area: φ25 ~ 175mmCan measure the voltage inside the machine(876/884 with long cable)

Hand-Held Electrostatic Voltage MeterTrek 520/523/876/884

■

■■

■

All-in-One Instrument-Measures, displays and stores voltage, decay time, temperature and humidityExceeds current requirements of ANSI/ESD SP3.3 for Periodic Verification of Air IonizersTest Balance and DecayLow Cost/Performance RatioHand-held, Battery OperatedMicroprocessor DrivenBuilt-in Self TestExclusive Monroe Electronics Two-year Warranty

Charge Plate MonitorMonroe 287B

■

■

■■■■■■

High Accuracy Contact Electrostatic Voltage MeterTrek 821/820/800

Measurement range: 0 ~ ±2kV DC or peak AC(821/820)0 ~ ±100V DC or peak AC(800)Accuracy: 800/820: ±0.1%(Full scale) 821: ±1%(full scale)Frequency: 1kHz(TREK 821), 5kHz(TREK 820), 12kHz(TREK 800)

■

■

■

800

820

ESD Event DetectorTrek 901HS

Detect CDM signalNever affected by other EMI signalFive LED lamp show different ESD intensionBuzzing alarm functionNew model 901HS active antenna, more sensitive and extend the measurement range

■■■■■

821

■

■■■■■

■■■

876

520

Electrostatic Voltage Monitor/MeterTrek 541A/542A

Measurement Range: - ±1kV DC or peak AC(TREK 541-1) - ±100V DC or peak AC(TREK 541-2) - ±10kV DC or peak AC(TREK 542-1) - ±20kV DC or peak AC(TREK 542-2)Display the voltage by LCD screen and record the ±peak voltageRemote control by voltage output monitorRS-232 communication interfaceSet up ±limit alarmMeasure human body voltage with an adaptor

■

■

■■■■

Charged Plate Voltage Range: 0 ~ ±55V DC or peak AC, nominalCharged Plate Voltage Measurement Accuracy: 0.2% of full scaleCharged Plate Capacitance: 20pF ±4pFRelative Humidity: To 85%, noncondensingOperating Range: -60°C ~ 160°C

■

■

■■■

Charged Plate Monitor(CPM)Trek PD04002A

156A 157

158A

157

sistance Meter

■■■■■■■■

ESD Audit KitTREK 511/1501

Range: Low ±2KV; High: ±20KVAccuracy: Better than 5% of reading1501 can test Surface resistance103Ω ~ 1012ΩDisplayed values can be stored in internal memoryRecords temperature and relative humiditySoftware exports data to .CSV format and generates. HTML report for data comparisonBuilt-in electrodes with conductive rubber

■

■■■■■■

Digital Stat-Arc 2 IS for Hazardous Monroe 282IS

Pulsing-beam range finder for always obtaining the correct readingExclusive Auto-Zero circuitHOLD button captures transient readingsRecorder output and 40-hour batteryDrift-free accuracy even in ionized environmentsCharged plate adapter availableModel 282IS-Intrinsically safe(IS)meterUL Certification Class I Division 1, GroupsA, B, C, D and Class II, Division 1, GroupsE, F, G

Voltage measurements in the range of 0 to ±2KV DC or peak ACVoltage monit: better than 0.05% of full scale or 0.2% of full scale

High-SensitvityDC Stable Electrostatic VoltmeterTrek 344/PD06078(Four [4] Channel)

■

■

Measurement Voltage: DC 10V, 100V, 500VTest range: Low Ω range: 1 ~ 10kΩ High Ω range: 1 kΩ ~ 199GΩIntegrated data logger for 50.000 test values and USB communication port for data transmissionClip-on humidity and temperature sensorsProbes: 2xModel 870(Weight: 2.27kg/φ: 63.5mm) with conductive rubber(grey)and extension

Surface Resistance MeterWolfgang METRISO 3000/B530

■■

■

■■

Range: 1.0x103 to 1x1012Ω@10V 1.0x106 to 1x1012Ω@100VAccuracy: Resistance measurments within ±0%(20% for resistance values 1x1011 and greater)Open Circuit Votages: 10 and 100 volts ±5%External Electrodes: Two NFPA-99 5 pound electrodes(80 oz.) ±2oz with Shore A(IRHD)50-70 durometer conductive pads that comply with EOS/ESD S4.1Relative Humidity：Range from 5% ~ 95%；±10 digits Typ

Surface Resistance Test KitMonroe 292A

■

■

■■

■

158A

1Electrostatic Relative Measuring Instruments

DI Water Voltage test probe

age

Uses Wolfgang Warmbier GmbH tester from Germany in accordance with IEC61340-5-1, the highest international standard.

Voltage: ±5V ~ ±8KVHBM(±5V ~ ±8KV) meets MIL STD.883E, ANSI/ESDA/JEDEC JS-001, AEC Q100-002; MM meets ANSI/ESDA S5.2, JEDEC 22-A115C; ±5V ~ ±2KVHMM meets IEC 61000-4-2; ±5V ~ ±5 KVPinScan enables automated hands-free 2-pin testing of devices up to 128-pins

■■

■

■■

Electrostatic Discharge SimulatorETS 9910 PinScan/9910 PurePulse

According to ESD S11.31 test standard designRange: +800 ~ +1200VWave rise time measurement: - 6±2ns(0Ω);

- <20ns(500Ω)Measuring waveform down time: - 150±15ns(0Ω);

- 200±20ns(500Ω)

■■■

■

AC High Frequence IonizerETS 4406D

Through the electrostatic lift time testing anti-static quality of materialsRange: ±600 ~ 5.5kVTime: 0 ~ 99.99sResolution: 0.01sEquipped with various fixture to meet customer demand of different material test

■

■■■■

Nozzle IonizerTREK 950

Ultra-Small, Compact Body; Corona-Based DischargeVariety of Air Flow ProfilesOptional Nozzle TipsIon Air Transfer Via Optional TubesAutomatic Alarm Protection for Critical Production Line ProcessesEasy MaintenanceRemovable Power Supply & Emitter Needle Eases Cleaning and Parts ReplacementCE Compliant

■■■■■

■■■■

Six-Channel Hybrid HandheldParticle CounterHalTech HPC600

All 6 channels continuously adjustable with 0.1 micron step resolutionCombines both handheld and portable functionalities with a built-in mini-printerUSB and RJ45 interfaces for remote real-time sampling and data downloadLong-distance remote sensing via EthernetUp to 6000 internal data memoryExcess-count-limit warningsHigh precision, digital, external temperature and humidity sensorsDurable keypads with a large blue LCD display

■

■

■

■■■■

■

ESD Shielding Bag TesterETS 4431T

Replace and clean the emitting pin

Smart TweezersADI ST5-L Iskra

Convenient one-hand operationIdeal for Surface Mount DevicesAutomatic LED polarity detectionForward drop voltage displayAdjustable preset test currentAdjustable test duty cycleLED visual brightness verificationLED visual color verificationPortable and ergonomic design

■■■■■■■■■

ESD Entrance Guard SystemQuatek-RM-120/920A

Wrist Strap: Upper Limit: 35MΩ Lower Limit: 750kΩ/0ΩESD Shoes:Upper Limit: 20MΩ/40MΩ

35MΩ/70MΩ70MΩ/140MΩ100MΩ/200MΩ

Lower Limit: 100kΩ/200kΩ2 shoes in seriesstandard: ANSI/ESD 20.20/IEC 61340 Stand alone and Net workingSupporting Customer Current attendance systemPower off safety ProtectionReal-time synchronous data with HR system

■

■

■■■■■■

Wireless ESD Monitoring SystemQTI-VM54XQS

High Accuracy, High StabilitySupporting High Vacuum and High TempretureFlexible distance installationMultiple Channel monitorB/S Structure Software, IE remote control

■■■■■ ESD Grounding Wireless

Monitor SystemQuatek-RM-G1800

LoRa Wireless Data Transfer: Avoid WIFI Noise; Support 500m indoorBreakpoint Resume and Romote Control: Customize Report and APP suportFlexible configuration and Easy upgrade without any Cable workCustomer can choose Basic Edition and Pro Edition; Cost efficient Solution

■

■

■

■

d

www.quatek.com.hk

2Electrostatic Eliminator/Other ESD Tool

Wireless EOS/ESD MonitoringWrist Strap Monitor

Mat Monitor

Grounding Monitor

Pro-Multiple Products Line Monitor

Portable, Self-containedBattery-poweredEasy to operateLarge LCD displayTwo rangesInterchangeable cupsAnalog outputMeets requirements of EIA-541 StandardPoint contact measurement of small areasLow costSimple operationMinimal training requiredUses ordinary oscilloscope probe for contact measurement of small objectsMeasures performance of ESD materials

■■ ■■■■■■■■■■■

■

NanoCoulomb MeterMonroe 284

3Anti-ESD Consumable Parts

Anti-ESD Dry ShieldWolfgang Warmbier

Custom sizes available on requestTypical surface resistance Rs = 109 ~ 1010Ω(Inner layer/outer layer) Shielding, moisture barrier bagProtection against electrostatic discharge and electrostatic fieldsComplies with MIL-B81705 Type 1 Class 1EMI-Shielding > 40dbElectrostatic Shielding < 10nJ(Energy Test)The moisture barrier property is achieved through the multilayer construction which includes disspipative Polyester, Aluminium metallization and dissipative PolyethyleneHeat sealable, can be used for vacuum packaging applicationsStandard print: Product name, ESD symbol, barrier bag symbol, Recycling symbol and lot Nr

■■■■■■■■

■

Anti-ESD Labels

Wrist Strap & Heel GroundStatico

Durable and adjustable bandHook and loop heel grounder1 M ohm safety resistor

■■■

Anti-ESD Office EquipmentWolfgang Warmbier

Typical surface resistance RS = 109 ~ 1010ΩSize: DIN A4, 0, 09mm2 open sidesQuantity = 100 pcs./unitTransparent(embossed surface)Permanent static dissipative IDP FilmRecyclableEmbossed(made of 90μm film)

■■■■■■■■

Conductive GlueWolfgang Warmbier

For ECOSTAT®-DF CENTRA-NV PolyamideConsumption: app. 450 g/sqm

■

■

Dissipative BrushWolfgang Warmbier

Resistance to groundable point Rgp = 109 ~ 1010Ω (hand held brush)

■

Anti-ESD Tote BoxesWolfgang Warmbier

Permament volume conductive PolypropyleneMaterial thickness: 3mmMaterial weight: 550g/²Typical surface resistance R·104 ~ 105Ω

■■■■

Anti-ESD Table And Floor MatsStatico

Typical resistance to ground RG = 106 ~ 108ΩStandard sizes: 650×950×13mm, include 2×10mm snap, custom sizes on request Static dissipative PUR materialErgonomic, Soft and ElasticImproved standing comfortHeat and sound absorbent, anti-skid and shock absorbentClass B110mm snap connectionBlister diameter: 14mm

■■

■■■■

■■■

Anti ESD ClothsWolfgang Warmbier

Typical point to point resistance Rpp = 106 ~ 108ΩStatic dissipative fabric made of a mixture of 43% Polyester, 50% Cotton and 7% Carbon coated yarnESD symbol on one sleeveLightweight, breathable and comfortable, weight 270g/m²

■■

■■

Anti ESD Shoes Wolfgang Warmbier

Typical wearer overall resistance Rgp = 105 ~ 107ΩSecurity shoe according to EN ISO 20345: 2004-S2Soft leatherBreathable SECURA TEX liningExchangeable weight module for heel area

■■■■■

Anti-ESD ChairWolfgang Warmbier

Typical resistance to ground Rgp = 105 ~ 107ΩColour Accessories: blue or grey, with or without armrests and back seatGas lift height adjustment, 430 ~ 570mmStandard self-breaking conductive castorsWith ESD symbolGS certified

■■

■■■■

Surface Resistance106-12ΩStrictly Controlled ResistanceLow Fluctuations of Resistance Low Out-gassingLow Particle and Metal ContaminationGood Mechanical PropertyBoth Injection and Machining availableHeat and Chemical Resist

Anti-ESD Polymer Material

■■■■■

■■

■

Its surface resistivity is 10⁸Ω/sq and has effect of preventing static electricityAdhesion of gel removes dust, so there is no moving of glue and left of glueBy washing it with water and drying it, it can be used repeatedlyIts rolletr is made from electric conductive urethane, and its grip is made of metalThere is no silicon use in the process and materials

Semiconductor Gel Roller

■

■

■■

■

Wafer carriersFOUPIC test socketBurn-in socketLCD related partsStorage traysChip carriersEquipment casesCassettesTweezers

Application■■■■■■■■■■

PEEK, LCP, PES, PPS, PBI, PEI, PBT, PC, POM, OthersResistivity: Krefine type A: 1010-12Ω Krefine type B: 108-10Ω Krefine type C: 106-8ΩSheets: 500×500×10mm 500×500×12.5mm 500×500×20mm 100×150×5mm

Various types of Anti-ESD material■

■

■

www.quatek.com.hk

4Semiconductor Wafer And Related Material RS Test System

RT-70V/RG-7

EC-80

NC-100PV

HF-300

HF-90R HF-100DCA

EC-80P

User programable measurement pattern and programmable measuring patternTester self-test function, wide measuring rangeThickness, edge, temperature correction for silicon waferFilm thickness conversion function from sheet resistanceSample sizes: ~ 8inch, ~ 156×156mmMeasuring range: [R]1m ~ 300kΩ・cm/[RS]5m ~ 10MΩ/sq

■

■■■■■

Semi-Automatic Four Point Probe SheetResistance/Resistivity MeasurementNapson Cresbox

Full automatic RS measurement system(Sheet Resistance and Resistivity) Wafer thickness, P/N polarity detectionNon contact resistivity, PN, thickness(TTV, STIR, Bow, Warp)measurementCan be added with the Inspection option, measuring cracked(Micro crack),edge collapse, the minority carrier lifetime etc.2D/3D Mapping

■

■■

■

High Speed 300mm Wafer ResistivityMapping And Sorting SystemNapson WS-3000/NC-6800+TTV

Measurement of the silicon wafer, metal film, GaAs, epitaxial layerWafer size: 2" ~ 8"/300 ~ 800μm(thickness)With temperature compensation functionSimultaneous measurement of PN(EC-80P-PN)RS Range: 0.001 ~ 200Ω·cm or more

■

■■■■

Non Contact Surface Resistance TesterNapson EC-80/EC-80P

Each module can measure resistivity, thickness, Life-time, PN polarity without contactCan be equipped in the production lineTesting flexible solar film, ITO filmResistance range: 5 ~ 500Ω/□(NC-600)/ 50 ~ 1000Ω/□(NC-700)

■

■■■

Non Contact In-Line Measurement ModuleNapson NC-100PV/NC-600/NC-700

Microwave photoconductivity decay(HF-300)Non contact type RF photoconductivity decay(HF90R)Direct current method(HF-100DC)Non contact measurement of minority carrier lifetimeMeasurement of silicon ingots, silicon bulks, silicon wafersMeasuring range: 100μS ~ 5000μS(HF90R)/50μS ~ 20mS (HF-100DC)(10 ~ 5000Ω·cm range)/0.1μS ~ 1000μS(HF-300)Comply with JIS specification

■■■■■■

■

Lifetime Test SystemNapson HF-300/HF-90R/HF-100DC

WS-3000

NC-6800 + TTV

NC-700

NC-600

■

■

■

Combinational measurement system by Measurementtester(RT-70V)and StageMeasurement tester: RT-70V - Thickness input with easy JOG dial operation - Tester self-test function/Auto change-over measurement range functionMeasurement stage - You can choose different stage models by your purpose and applications

Manual Four Point Probe SheetResistance/Resistivity MeasurementNapson RT-70V Series

■

■■

Fully Automatic Non-Contact Sheet Resistance Measurement System For Flatpanel DisplayNapson RT-3000/RS-1300

■■■■■

Measurement range: 0.01 ~ 1000ohm/sq9 points measurement with in 10sLocation of 9 points is customer designSupport automation systemMacth with any automation maker

Inline 4PP ModuleNapson DF-100

■

■

■

■

Si Wafer SorterNapson NC-3000R+TTV

Eddy Current methods for 3" ~ 12" Silicon Wafer test(resistivity, thickness, P/N polarity, TTV)Using high speed mechanical robot arm and transmission systemNon-contact measurement method, make sure not to damage the WaferWith a temperature correction function

■■■

■■■■■■■■

Maximum display: 150000(Sheet Resistance Ω/□)/ 33000(ResistivityΩ)Sampling rate: 4samples/secDisplay: 6figures, 7segment LED display high 14.2mmOverload indication: “00000” flickerRange selection: Auto or ManualOverload protection: AC 330VrmsWorking voltage: AC 90V ~ 264V, 50/60Hz＜15VAWorking temperature: 0 ~ 50C, RH≤80%Serial communication interface: RS232, RS485Bit rate: 1200/2400/4800/9600/19200/38400/57600/115200Dimension: 248mm(length)x93mm(width)x295mm(height)

Resistivity Measuring InstrumentQuatek-5601TSR/QT50

■■■■■

PN polarity detection(including oxidation film)Non-contact detection, won't cause surface damageSimple operation, easy to carryLED display, easy to identifyLED display(P = red, N = green, NG = yellow)

PN CheckerNapson PN-12α/PN-50α/PN-8LP

RT-70V/RG-10

PN-12α

PN-50α

PN-8LP

TFT-LCD/CF Substrates(ITO, Metal Layers and n+a-Si Layers)for large area, high precision, high stability of the automatic RS measurement by four point probe method Match with all size glass, up to G10.5 size glassCan be customized according to customer requirements

■■

■

■

High speed and high tact performance, High stable measurementHigh accurate dual configuration measurement and Selftest functionSilicon solar wafers 156×156mm or less, thickness 100μm ~ 5 mm compatibleX-Y multi patterns with 0.1mm resolution and 2-D, 3-D mapping measurement

Semi-Auto 4-Point Probe Sheet Resistance Measurement SystemNapson RG-200PV

V5.19S.EA

info@quatek.com.hk

Head Office

4/F.,308,Sec.1 Nei Hu Road, Nei Hu,Taipei 11493,Taiwan R.O.C.Tel︰+886-2-27973357 Fax︰+886-2-27973957Email： sales@quatek.com.tw

Shanghai office

Unit 2112, 21F, Yong Sheng Tower 2025, West Zhong Shan Road,Shanghai, P.R.C Tel︰+86-21-64813366 Fax︰+86-21-64813369Email： sales@quatek.com.cn

18-24-D, Gurney Tower, Persiaran Gurney, 10250 Penang, MalaysiaH/P: +6016 421 3445Email: info@quatek.com.hk

Malaysia Office

Thailand Office

1694,1694/1 Prachasongkhro Road, DindaengDindaeng, Bangkok 10400, ThailandTel: +66-2277-9971 / +66-2692 3980Fax: +66-2692-3978Email: info@quatek.com.hk

5th Floor Richville Corporate Tower, 1107 Alabang-Zapote Road, Madrigal Business Park, Ayala Alabang, Muntinlupa City, PhilippinesTel: +63918-907-9788Fax: +632-809-5412 Loc-10Email: info@quatek.com.hk

Philippines Office

Singapore Office

Caltron Pte Ltd. 9 Kallang Place#01-09,Singapore 339154Tel: +65-62952323Fax: +65-62982333Email: info@quatek.com.hk