Electrical Testing · Salt Spray Chamber Thermal Shock Chamber Climate Temperature System Humidity...

5
Electrical Testing ISO 17025 (NABL Accredited)

Transcript of Electrical Testing · Salt Spray Chamber Thermal Shock Chamber Climate Temperature System Humidity...

Page 1: Electrical Testing · Salt Spray Chamber Thermal Shock Chamber Climate Temperature System Humidity Chamber Oven Deep Freezer Million Megaohm meter Iron Temperature Setting Kelvin

Electrical TestingISO 17025 (NABL Accredited)

Page 2: Electrical Testing · Salt Spray Chamber Thermal Shock Chamber Climate Temperature System Humidity Chamber Oven Deep Freezer Million Megaohm meter Iron Temperature Setting Kelvin

Electrical Endurance Testing

1. a. PVC Insulated Cables(1100 V) Annealing Test(Cu) Upto 50 kN

IS:694-2010 (NABL Appd.) Tensile Test(Al) Upto 50 kN

Wrapping Test(Al) Visual

Conductor Resistance Test 11Ω

Test For Overall Dimensions 25 mm,200 mm

Ageing In oven (200°C,0-5 kN)

Shrinkage Tests (200 mm,Upto 200°C)

Hot Deformation Test Upto 200°C

Loss Of Mass In Air Oven (200°C,200g)

Heat Shock Tests Upto 200°C

Insulation Resistance Test Upto 100X 10 MΩ

High Voltage(Water Immersion Test) (10 kV A.C,100°C)

High Voltage(Water Immersion Test) (10 kV D.C,100°C)

b. Cross Linked Polyethylene Insulat -ed PVC Sheathed Cables: Part 1 Same As Above Same As above For Working Voltage And 1100V IS: 7098(P-1) 1988 (NABL Appd.)

c. Aluminum Conductors For Diameter Of Al Upto 25 mm Overhead Transmission Purposes Conductivity Resistence20°C 11 Ω IS :398 (P-2: 1996) (NABL Appd.) Breaking Load Upto 50 kN

Ductility Test 0- 50kNElongation 0- 500kNGalvanizing Test 0-200g

d. Aluminum Conductors For Stranding Visual Overhead Transmission Purposes Lay Ratio 0.5 mm IS: 398:1994 (NABL Appd.)

2. Water Purier Leakage Current Test 2000μA IS :14724-1999 (NABL Appd.) High Voltage Test 0- 5kV

Earthing Connection (50A ,20 V)3. Electric Iron Rating Visual IS:366-1991(NABL Appd.) Measurement Of Heating Time 400°C

Measurement Of Sole Plate 400°CProtection Against Shocks 0- 75 VPower Input And Current 5 kW

4. Electric Immersion water Heater Same As Above Same Ranges IS:368-1982 (NABL Appd.)

5. Switches (Domestic Purpose) Insulation Resistence Test Visual IS:3854:1997 (NABL Appd.) Resistence To Rusting Visual

Protection Against Shocks 0-75 V

6. Automobile/ Electronic Components Testing

Heat Resistance Test 30 to 250ºC JIS, JASSO, IEC-60068, Tata Cold Resistance Test -80 to 27ºC Standard, Maruti Standard Thermal Cycle Test -40 to 180ºC and IS:10250 Thermal Shock Test -80 to 180ºC

Damp Heat Test 99.9% R.H

Product Description &Applicable Standard

Test Performed Range

9

We provide complete testing of electrical and electronic products. This ensures customers are able to comply with the widest range of international standards and end user requirements.

Parameters

Page 3: Electrical Testing · Salt Spray Chamber Thermal Shock Chamber Climate Temperature System Humidity Chamber Oven Deep Freezer Million Megaohm meter Iron Temperature Setting Kelvin

ASTM B117, ISO:9227, JIS:J2371, Salt Spray Test 5% NaCL

IS:5528 IS & IEC Standard Insulator Testing NFC Standard Piercing Connector Testing IS & NFC Standard Overhead Wire Fitting Testing IS Drop Out Fuse Testing IS Fuse Wire Testing

7. Power Generation & Distribution System Testing a. Current Transformers Testing Determination of Error 5A to 2000A IS:2705-1992, IEC:60044-1-2003 measurement of winding 1mΩ to 20 kΩ

ResistanceTemperature Rise test 2400A 0-200 Temp.High Voltage Power 3kV Frequency TestVerication of terminal –Marking and polarityAccuracy Limit Factor 30Composite Error Measurement 15%

b. Energy Meters Single Phase Energy Meter

Ω

IS:10250

240 V , 1-5 Amp

ICBIP-88 (Feb 2002), IS:13779:1999 Three Phase Energy Meter 5Wh to 100 kWh

IS:14697:1999, IEC:62052-11-2003

c. Breakers

d. Relays

IEC:60255-5 Insulation Resistance Test 100M

Humidity Test 99.9%

8. Energy Efciency & Performance

Testing

IS:15750 Frost Free Refrigerator Test

AS/NZS:4474.1 & AS/NZS 4474.2/ Direct Cool Refrigerator Testing

IS:1476

IEC 62301 Ed. 1.0 & IEC 62087 Colour Television Test

IS 14155 & IEC 60456 Washing Machine Test

IS 1391 Part 1 & Part 2 Air Conditioner Testing

IS 12615:201, IS 4029 -1967, Induction Motor Testing

IS 325:1996

IS 2418 (Part I), (Part II), (Part III) Tubular Fluorescent

& Part(IV) - 1977 Lamp Testing

IS 14220:1994, IS 8034 : 2002, Agricultural Pump Sets

IS 9079 : 2002, IS 11346: 2004

S 374 :1979 Ceiling Fans Test

IS 2082:1993; IS 302-2-21 Water Heaters/

Electric Geysers Test

IS 4246 : 2002 Liqueed Petroleum Gas Stoves

Product Description &Applicable Standard

Test Performed Range

Page 4: Electrical Testing · Salt Spray Chamber Thermal Shock Chamber Climate Temperature System Humidity Chamber Oven Deep Freezer Million Megaohm meter Iron Temperature Setting Kelvin

9. Equipment Health Monitoring & Cables Services Turbines

TransformersGeneratorsMotors

10.Energy Audits We Perform On Site Audits for Energy.

Salt Spray Chamber Thermal Shock Chamber Climate Temperature System Humidity Chamber Oven Deep Freezer Million Megaohm meter Iron Temperature Setting Kelvin Double Bridge Conductivity Meter AC/DC High Voltage Tester Water Bath Multi Test Panel

Electrical Testing

List of Major Equipments

Product Description &Applicable Standard

Test Performed Range

Page 5: Electrical Testing · Salt Spray Chamber Thermal Shock Chamber Climate Temperature System Humidity Chamber Oven Deep Freezer Million Megaohm meter Iron Temperature Setting Kelvin

E-41 Okhla Industrial Area Phase-IINew Delhi-110020Ph:- 91 11 40522000, 41611000E-mail: [email protected]:- www.spectrogroup.com www.spectro.in

Head Office Corporate office

S-1 GNEPIP, Surajpur Industrial AreaKasna, Greater Noida, Phase-V

Gautam Budha Nagar (U.P.)Pin Code: 201308

Ph:- 0120-2341251/52 E-mail:- [email protected]

URL:- www.spectrogroup.com2017

Major Ac�vi�es

Testing

Calibration

Training

Inspection

R&D

Automation

Reverse Engineering

Ü Metals & Alloys

Ü Non Destructive Testing

Ü Rubber & Polymers

Ü Food and Agro Products

Ü Coal, Solid Fuels & Petroleum

Ü Electrical & Electronics

Ü Pharmaceuticals & Drugs

Ü Building Materials

Ü Minerals & Chemicals

Ü Leather & Textiles

Ü Water & Environment

Ü Paper & Packaging Materials

Ü Hazardous Substances

Ü Clean Room Validation

CIN : U74220DL1998PL C092698