EENG 225 Fundamentals of Electrical Engineering Spring...
1
DO NOT FORGET TO WRITE YOUR NAME!! G02 Name: Number: Date: 31/03/2017 EENG 225 Fundamentals of Electrical Engineering Spring 2016-2017 Quiz I Instructor: Mohammad N. Sabet Q1. In the following circuit , use Nodal analysis to find the currents , 5Ω 20 V 1 A + - 10 Ω i2 i1 Q1 T 100 Time: 9.30-10.00 V x Apply KCL at node V x , assuming all currents are leaving the node(You can do this by redrawing the circuit and temporarily ignore all the unknown to proceed with the analysis) (V x -20) 5 + V x 10 - 1=0 V x =16.6 V From the original circuit and given current directions: i 1 = (20-V x ) 5 *: Be carefull on current direction i2= V x 10 v=20 v (Listen to my voice stick by double clicking on icon)
Transcript of EENG 225 Fundamentals of Electrical Engineering Spring...
DO NOT FORGET TO WRITE YOUR NAME!! G02
Name: Number:
Date: 31/03/2017
EENG 225 Fundamentals of Electrical Engineering
Spring 2016-2017 Quiz I
Instructor: Mohammad N. Sabet
Q1. In the following circuit , use Nodal analysis to find the currents ,
5Ω
20 V 1 A+- 10 Ω i2
i1
Q1
T 100
Time: 9.30-10.00
Vx
Apply KCL at node Vx , assuming all currents are leaving the node(You can do this by redrawing the circuit and temporarily ignore all the unknown to proceed with the analysis)
(Vx-20) 5
+Vx10 - 1=0
Vx=16.6 V
From the original circuit and given current directions:
i1=(20-Vx)
5*: Be carefull on current direction
i2= Vx
10
v=20 v
(Listen to my voice stick by double clicking on icon)
Farhad
Oval
Farhad
Line
Farhad
Line
Farhad
Line
Farhad
Line
Farhad
Pencil
Farhad
Oval
Farhad
Line
Farhad
Line
Farhad
Line
Farhad
Pencil
Farhad
Sticky Note
Marked set by Farhad
Farhad
Sound Attachment
Sound Clip (449 KB)
