E1/G.703 Balun Chassis - Patton · PDF fileP atton’s high density E1/G.703 rack-mounted...

of 2/2
P atton’s high density E1/G.703 rack-mounted balun chassis is ideal for carriers who are upgrad- ing their main distribution frames from unbalanced coax to balanced RJ-48C connections. Patton’s balun chassis enables customers to match the connec- tors, impedance, and signal characteris- tics of 16 dual-coaxial cable BNC con- nections (75 Ω) to 16 twisted-pair con- nections (120 Ω). The Model 464RC comes with the stan- dard BNC coax connector type. The model 466RC is designed for installa- tions that require 1.6/5.6 coax connec- tors. Both models come equipped with 16 RJ-48C connectors and a 64-pin AMP CHAMP Telco connector for 120 Ω connections. The Models 464RC and 466RC occupy only 1U of a 19-inch equipment rack and are fully complaint with ITU-T G.703 specifications. The Model 464RC and Model 466RC balun chassis are the most elegant, scaleable, and cost-effective choices for converting your E1/G.703 signals. For more information, visit www.patton.com . The Patton Model 464RC/466RC E1/G.703 balun chassis provides 16 ports of 75/120 Ω conversion in a compact 1U-high chassis. E1/G.703 Balun Chassis Model 464RC/466RC Baluns 64-pin AMP CHAMP Telco connector RJ-48C jacks ports 1–8 16 coax BNC pairs (Model 464RC) or 1.6/5.6mm pairs (Model 466RC) Compact 1U high chassis RJ-48C jacks ports 9–16 Reversible top cover allows for either front-facing BNC or RJ-48C connectors Model 464RC Built-in Patton know-how. We ve been building interface conversion devices since 1984! 500 VAC/VDC transformer isolation Converts 16 Channels of E1 16 ports of 75/120 Ω conversion Compact Chassis Design 1U high chassis installs in standard 19-inch racks Reversible Front Panel Face Easily change the chassis front panel configuration from RJ-48C to BNC connectors Low Insertion Loss Fully meets ITU-T (CTR-12) G.703 standards No Power Required Operation is transparent to data. No AC/DC power is required. Doubles as a Patch Panel Our unique design enables the Models 464RC and 466RC to function as patch panels Transformer-Isolated Connections Up to 500 volts AC/DC isolation
  • date post

    29-Mar-2018
  • Category

    Documents

  • view

    216
  • download

    1

Embed Size (px)

Transcript of E1/G.703 Balun Chassis - Patton · PDF fileP atton’s high density E1/G.703 rack-mounted...

  • Pattons high density E1/G.703rack-mounted balun chassis isideal for carriers who are upgrad-ing their main distribution frames fromunbalanced coax to balanced RJ-48Cconnections. Pattons balun chassisenables customers to match the connec-tors, impedance, and signal characteris-tics of 16 dual-coaxial cable BNC con-nections (75 ) to 16 twisted-pair con-nections (120 ).

    The Model 464RC comes with the stan-dard BNC coax connector type. Themodel 466RC is designed for installa-tions that require 1.6/5.6 coax connec-

    tors. Both models come equipped with16 RJ-48C connectors and a 64-pinAMP CHAMP Telco connector for 120 connections. The Models 464RC and466RC occupy only 1U of a 19-inchequipment rack and are fully complaintwith ITU-T G.703 specifications.

    The Model 464RC and Model 466RCbalun chassis are the most elegant,scaleable, and cost-effective choices forconverting your E1/G.703 signals.

    For more information, visit www.patton.com.

    The Patton Model 464RC/466RC E1/G.703 balun chassis provides 16 ports of 75/120 conversion in a compact1U-high chassis.

    E1/G.703 Balun ChassisModel 464RC/466RC

    Baluns

    64-pin AMP CHAMPTelco connectorRJ-48C jacks

    ports 18

    16 coax BNC pairs (Model 464RC) or1.6/5.6mm pairs (Model 466RC)Compact 1Uhigh chassis

    RJ-48C jacksports 916

    Reversible top cover allows for eitherfront-facing BNC or RJ-48C connectors

    Model 464RC

    Built-in Patton know-how.We ve been building interface

    conversion devices since 1984!

    500 VAC/VDCtransformer isolation

    Converts 16 Channels of E116 ports of 75/120 conversion

    Compact Chassis Design1U high chassis installs in standard 19-inch racks

    Reversible Front Panel FaceEasily change the chassis front panel configuration from RJ-48C to BNC connectors

    Low Insertion LossFully meets ITU-T (CTR-12) G.703 standards

    No Power RequiredOperation is transparent to data. No AC/DC poweris required.

    Doubles as a Patch PanelOur unique design enables the Models 464RCand 466RC to function as patch panels

    Transformer-Isolated ConnectionsUp to 500 volts AC/DC isolation

  • 07M464RC-466RC- DS3

    Patton is a registered trademark of Patton ElectronicsCompany in the United States and other countries.

    Balun Selection Guide

    Typical Application Specifications

    Ordering Information

    Coax Type

    64-Pin

    64-Pin

    Coaxial cable connector(MC) ex: 460MC

    RJ-48CConnector

    RackFormat

    Top speed

    E1 E2 E3 1.6/5.6 mm BNC

    Model

    460

    462

    463

    464RC

    465

    466RC

    TelcoConnector

    Conveniently converts sixteen 75 E1 channels from your E3 mux to 120 chan-nels for connection to your CPE via RJ-48C or 64-pin Telco connectors.

    Transmission LineITU-T G.703

    75-ohm ConnectionBNC

    120-ohm ConnectionRJ-48C or 64-pin Telco

    Link-to-Data Isolation500 VAC/VDC

    Temperature Range050C (32122F)

    Dimensions48.3 W x 8.9 D x 4.8 H cm

    (19.00 W x 3.5 D x 1.9 H inches)

    Weight1.73 kg (3.82 lbs)

    464RC

    High density 16-port, 10-inch,

    1U (4.44cm) balun chassis.

    BNC coax connector for 75 connections.

    G.703 rack-mount.

    466RC

    High density 16-port, 10-inch,

    1U (4.44cm) balun chassis.

    1.6/5.6 coax connector for 75 connections.

    G.703 rack-mount.

    Patton-Inalp Networks AG

    Meriedweg 7CH-3172 Niederwangen

    SwitzerlandPhone +41 (31) 985 25 25

    Fax +41 (31) 985 25 26E-mail [email protected]

    Web www.inalp.com

    Patton Electronics Co.

    7622 Rickenbacker DriveGaithersburg, Maryland 20879

    USAPhone +1 301 975 1000

    Fax +1 301 869 9293E-mail [email protected]

    Web www.patton.com

    PE-Inalp Networks Private Ltd

    Old No. 14 and New No.6,Brahadambal Road,

    Nungambakkam High RoadChennai: 600 034, India

    Phone +91 44 45490395/6/7Fax +91 44 4549.0394

    Email [email protected] www.patton.co.in

    An Associate of

    Electronics Co., USA