Digital Multimeter - PCE Instruments · PDF fileDigital Multimeter TECHNICAL SPECIFICATIONS...

Click here to load reader

  • date post

    20-May-2018
  • Category

    Documents

  • view

    221
  • download

    1

Embed Size (px)

Transcript of Digital Multimeter - PCE Instruments · PDF fileDigital Multimeter TECHNICAL SPECIFICATIONS...

  • Digital Multimeter

    TECHNICAL SPECIFICATIONSVariable Range Resolution AccuracyDCV 1,000 V 1 V 0,025 % +5 dgtACV 1,000 V 1 V 0.4 % +40 dgtDCA 10 A 0.01 A 0.15 % +2 dgtACA 10 A 0.01 A 0.07 % +5 dgtOhms 50M 0.01 0.05%+2dgtCapacity 10 mF 0.001 nF 1.0 % +5 dgtFrequency 10 MHz 0.01 Hz 0.005 % +1 dgtTemp. 1,350 C 0.1 C 1.0 % + 1 CInterface BluetoothMemory 30,000 meas. valuesPower supply 6 x 1.5 V AAA batteriesDimensions / weight 220 x 96 x 60 mm / 631 gINCLUDESDigital multimeter, test leads, batteries, software, temperature sensor, AC adaptor, bag, manualITEM NO. ITEM K-DT-9987 digital multimeter OPTIONAL ACCESSORIESK-CAL-DMM ISOcalibrationcertificate

    DT-9987DMM True RMS (1 kV, 10 A, 10 MHz)

    50,000 values, 320 x 240 pixels, TFT colour LCD TrendCapturefunctionforeasyverificationof

    recorded dataBluetooth for easy transfer of data 100 kHz bandwidth (voltage / current) peak values are registered (up to 250 s)

    TECHNICAL SPECIFICATIONSVaraible Range Resolution Accuracy 45 Hz - 1 kHz 1 - 10 kHzACV 220 mV 0.01 mV (1.0 % +10 dgt) (1.5 % +50 dgt) 2.2 V 0.0001 V (0.8 % +10 dgt) (1.2 % +50 dgt) 22 V 0.001 V (0.8 % +10 dgt) (1.2 % +50 dgt) 220 V 0.01 V (0.8 % +10 dgt) (2.0 % +50 dgt) 750 V 0.1 V (1.2 % +10 dgt) (3.0 % +50 dgt)

    ACA 220 A 0.01 A (0.8 % +10 dgt) (1.2 % +50 dgt) 2.200 A 0.1 A (0.8 % +10 dgt) (1.2 % +50 dgt) 22 mA 0.001 mA (1.2 % +10 dgt) (1.5 % +50 dgt) 220 mA 0.01 mA (1.2 % +10 dgt) (1.5 % +50 dgt) 2.2 A 0.0001 A (1.5 % +10 dgt) 1kHz ... 5kHz (2.0 % +50 dgt) 10 A 0.001 A (1.5 % +10 dgt) 1kHz ... 5kHz (2.0 % +50 dgt)

    DCV 220 mV 0.01 mV (0.1 % +5 dgt) 2.2 V 0.0001 V (0.1 % +2 dgt) 22 V 0.001 V (0.1 % +2 dgt) 220 V 0.01 V (0.1 % +2 dgt) 1,000 V 0.1 V (0.1 % +5 dgt)

    DCA 220 A 0.01 A (0.5 % +10 dgt) 2.200 A 0.1 A (0.5 % +10 dgt) 22 mA 0.001 mA (0.5 % +10 dgt) 220 mA 0.01 mA (0.5 % +10 dgt) 2.2 A 0.0001 A (1.2 % +50 dgt) 10 A 0.001A (1.2 % +50 dgt)

    Ohms 220 0.01 (0.5%+10dgt) 2.2k 0.0001 (0.5%+10dgt) 22k 0.001k (0.5%+10dgt) 220k 0.01k (0.5%+10dgt) 2.2M 0.0001M (0.8%+10dgt) 22M 0.001M (1.5%+10dgt) 220M 0.01M (3.0%+50dgt)

    Capac. 22 nF 0.001 nF (3.0 % +5 dgt) 220 nF 0.01 nF (3.0 % +5 dgt) 2.2 F 0.0001 f (3.0 % +5 dgt) 22 F 0.001 F (3.0 % +5 dgt) 220 F 0.01 F (4.0 % +5 dgt) 2.2 mF 0.0001 (4.0 % +5 dgt) 22mF 0.001 noespecificado 220mF 0.01mF noespecificado

    Freq. 220 MHz 0.001 Hz (0.01 % +5 dgt)

    TECHNICAL SPECIFICATIONSDiode test No-load voltage 2.8V, res. 0.001VContinuitytest No-loadvoltage0.45V,res.0.1Display 22,000 counts, LCDRange selection automatic / manualMeas. range 2 ... 3 / sBattery level ind. when battery is lowFunctions Min/MaxInterface RS-232Power supply 1 x 9 V batteryDisplay LCDOper. conditions 0 ... +40 C / max. 75 % RH (

  • TOPseller

    Digital Multimeter

    Display LCD display with backlight, with 3 digitsPower supply 9 V batteryAuto Power Off device is automatically disconnected after 30 min of inactivityOper. conditions 0 ... +50 C max. 85 % RHProtection IP 65Standard IEC 1010-1, 600 V CAT IIIDimensions 198 x 86 x 38 mm Weight 430 gINCLUDESMultimeter, test leads, K-type wire temperature sensor, battery, holster, RS-232 cable, software (English), instruction manual (German)ITEM NO. ITEM K-PCE-DM 22 datalogger multimeter OPTIONAL ACCESSORIES K-RS232-USB USB adaptor K-CAL-PCE-DM22 ISOcalibrationcertificate

    Accuracy- DCV 0.3% of reading +2 dgt (max 400 V); 0.5% +3 dgt (above)- ACV 0.5% of reading +5 dgt (max 400 V); 0.8% +5 dgt (above)- DCA 0.8% of reading+2 dgt (max 400mA); 1 % +2 dgt (above)- ACA 1.0% of reading+5 dgt (max 400mA); 1.2 % +5 dgt (above)-Ohms 0.6%ofreading+2dgt(max4M); 1 % +3 dgt (above)- Capacitance 1.9 % of reading +20 dgt- Frequency 0.5 % of reading +1 dgt- RPM 0.5 % of reading +1 dgt- Temperature 1.0 % of reading +2 C

    GeneralMeas. range 0.5 HzAlarm ifbelowxMemory internal, for 32,000 valuesSaving interval 1 s ... 20 min (adjustable)Interface RS-232Software included (English)

    TECHNICAL SPECIFICATIONSMeasurement range- DCV 400 mV; 4 V / 40 V / 400 V / 1,000 V- ACV 400 mV; 4/ 40/ 400/ 750 V- DCA 400/ 4,000 A; 40/ 400 mA; 10 A- ACA 400/ 4,000 A; 40/ 400 mA; 10 A-Ohms 400;4/40/400k;40M- Capacitance 4/ 40/ 400 nF; 4/ 40/ 400 F; 4/ 40 mF- Frequency 4/ 40/ 400 kHz; 4/ 40 MHz- RPM 4/ 40 kRPM; 4/ 40/ 400 MRPM- Temperature -50 ... +1,000 C

    Resolution- DCV 0.1 mV; 0.001 / 0.01 / 0.1 / 1 V- ACV 0.1 mV; 0.001 / 0.01 / 0.1 / 1 V- DCA 0.1 / 1 A; 0.01 / 0.1 mA; 0.01 A- ACA 0.1 / 1 A; 0.01 / 0.1 mA; 0.01 A-Ohms 0.1/1/10/100;1/10k- Capacitance 1 / 10 / 100 pF; 1 / 10 / 100 nF; 1 / 10 F- Frequency 1 / 10 / 100 Hz; 1 / 10 kHz- RPM 0.01 / 0.1 / 1 / 10 / 100 kRPM-Temperature 1 C

    PCE-DM 22TRUE RMS Datalogger Multimeter with Memory, RS-232 Interface & Software

    automatic range selection / standard EC 1010-1, 600 V CAT IIIDCV, ACV, DCA, ACA, resistance, capacity, freq., temp., revolutions continuity test, diode testPeak function (1 ms) / Relative / Min. / Max. / Hold internal memory (32,000 values)RS-232 interface, data cable, software

    207www.pce-instruments.com/english

  • TOPseller

    Digital Multimeter

    TECHNICAL SPECIFICATIONSVariable Range / resolution / accuracyAC current 2 A / 1 mA / 2.8 % +10 dgt 80 A / 100 mA / 3.0 % +8 dgtDC current 2 A / 1 mA / 3.0 % +10 dgt 80 A / 100 mA / 3.0 % +8 dgtAC voltage 100 ... 600 V 50/60 Hz (no contact)Measuring point illuminated by white LEDClamp diam. of conductor max. 18mmDisplay LCD 3 2/3 digits, with backlightPower supply 2 x 1.5 V batteries AAAStandards EN61010-1; CAT II / 600V EN61010-2-032; CAT III / 300VDimensions 65 x 164 x 32 mmWeight 175 gINCLUDES Mini clamp meter, batteries, bag, instruction manualITEM NO. ITEM K-PCE-DC3 mini clamp meter 80 A AC/DC OPTIONAL ACCESSORIES K-CAL-PCE-DC-Serie ISOcalibrationcertificate

    PCE-DC3 High-Resolution Clamp 2/80 A AC/DC

    LC display with 3 2/3 digits and backlightmeasures AC/DC current up to 80 AHold function / DC A zero reset function tests voltage without contact automatic range selection/ Automatic Power Off aperture of the clamp: 18 mm

    TECHNICAL SPECIFICATIONSVariable Range / resolution / accuracyAC current true RMS 200 AAC / (2.5 % +8 dgt)DC current 200 ADC / (2.0 % +5 dgt)AC voltage true RMS 600 VAC / (1.5 % +8 dgt)DC voltage 600 VDC / (1.0 % +2 dgt)Resistance 999.9/(1.5%+8dgt)Measuring point illuminated by white LEDClamp diam. of conductor max. 18 mmDisplay LCD 3 2/3 digits, with backlightPower supply 2 x 1.5 V batteries AAAStandards EN61010-1; CAT II / 600V EN61010-2-032; CAT III / 300VDimensions 65 x 164 x 32 mmWeight 175 gINCLUDES Mini clamp meter, test leads, batteries, manualITEM NO. ITEMK-PCE-DC2 mini clamp meter 200 A AC/DC OPTIONAL ACCESSORIES K-CAL-PCE-DC-Serie ISO calibration cert.

    PCE-DC2 Clamp200AAC/DC(+VAC/DC+)

    LC display with 3 2/3 digits and backlightmeasures AC/DC current, voltage & resistanceHold function / DC A zero reset function tests voltage without contact automatic range selection/ Automatic Power Off aperture of the clamp: 18 mm

    TECHNICAL SPECIFICATIONSVariable Range / resolution / accuracyAC current 200 A / 100 mA / 3.0 % +8 dgtDC current 200 A / 100 mA / 2,8 % +8 dgtFrequency 40 ... 50 Hz / 0.01 Hz / 1.2 % +5 dgt 51 ... 510 Hz / 0.1 Hz / 1.2 % +3 dgt 0.51 ... 1 kHz / 0.001 kHz / 1.2 % +3 dgtAC voltage 100 ... 600 VAC 50 / 60 Hz (no contact)Clamp diameter of conductor max. 18 mmDisplay LCD 3 2/3 digits, with backlightPower supply 2 x 1.5 V batteries AAAStandards EN61010-1; CAT II / 600V EN61010-2-032; CAT III / 300VDimensions 66 x 155 x 31 mmWeight 155 gINCLUDES Mini clamp meter, batteries, bag, instruction manualITEM NO. ITEM K-PCE-DC1 mini clamp meter 200 A AC/DC OPTIONAL ACCESSORIES K-CAL-PCE-DC-Serie calibrationcertificate

    PCE-DC1Clamp meter 200 A AC/DC & Freq.

    LC display 3 2/3 digits, with backlightmeasures AC / DC current, AC voltage & frequencyHold function / DC A zero reset function tests voltage without contact automatic range selection / Automatic Power Offmeasuring point illuminated by white LEDs

    www.pce-instruments.com/english 211

  • Digital Multimeter

    TECHNICAL SPECIFICATIONSVariable Range / resolution / accuracyACA 0 ... 4 A / 1 mA / 3 % +10 dgt 0 ... 80 A / 100 mA / 3 % +8 dgtDCA 0 ... 4 A / 1 mA / 2.8 % +10 dgt 0 ... 80 A / 100 mA / 3 % +8 dgtACV 0 ... 400 mV / 0.1 mV / 1 % +30 dgt 0 ... 4 V / 1 mV / 2 % +5 dgt 0 ... 40 V / 10 mV / 2 % +5 dgt 0 ... 400 V / 100 mV / 2 % +5 dgt 0 ... 600 V / 1 V / 2 % +5 dgtDCV 0 ... 400 mV / 0.1 mV / 1 % +15 dgt 0 ... 4 V / 1 mV / 1 % +3 dgt 0 ... 40 V / 10 mV / 1.5 % +3 dgt 0 ... 400 V / 100 mV / 1.5 % +3 dgt 0 ... 600 V / 1 V / 2 % +15 dgtResistance 0...400/0.1/1%+4dgt 0...4k/1/1.5%+2dgt 0...40k/10/1.5%+2dgt 0...400k/100/1.5%+2dgt 0...4M/1k/2.5%+3dgt 0...40M/10k/3.5%+5dgtCapacity 0 ... 40 nF / 10 pF / 5 % +30 dgt 0 ... 400 nF / 100 pF / 3 % +5 dgt 0 ... 4 F / 1 nF / 3.5 % +5 dgt

    0 ... 40 F / 10 nF / 3.5 % +5 dgt 0 ... 100 F / 100 nF / 5 % +5 dgtFrequency 0 ... 10 MHz / 0.001 Hz ... 0.01 MHz/ 1.5 % +5 dgtTesting conditions 0.5 ... 99 % / 0.1 % / 1.2 % +2 dgt pulse width: 100 s ... 100 ms frequency: 5 Hz ... 150 kHz sensitivity: 10 V RMS/minImpedance input7.8M/output3kAnalogue output 10 mV / AClamp max. 23 mm conductor diameterDisplay 4,000 dgt, LCD, with backlightOper. conditions -10 ... +50 C,

  • TECHNICAL SPECIFICATIONSVariable Measurement range; accuracyVoltage (ACV / TRMS) 100 / 400 / 750 V; 1.2 % +5 dgtCurrent (ACA / TRMS) 40 / 100 / 400 / 1,000 A; 2.0 % +5 dgtActive power measurement 4 kW ... 750 kW; 3.0 % +5 dgtApparent power measurem. 4 kVA ... 750 kVA; 3.0 % +5 dgtReactive power measurem. 4 kVA ... 750 kVAr; 3.0 % +5 dgtPower factor 0.3 ... 1 inductive and capacitive; 0,02 +2 dgtPhase angle 0 ... 90; 2.0Active energy 1 ... 9.999 kWh; 3.0 % +2 dgtFre